This fixes the bad rendering on the first frame when using the software renderer: the software renderer's Z buffer started out at 0, but most games clear it to 0xffffff instead; this means that things don't render correctly except for in the regions where the screen was cleared by an EFB copy earlier in the frame.
The system menu does clear the RTC flags, but we currently aren't updating the cache file, and since we clear them the system menu doesn't know to update the cache either. This means that launching a game via the system menu, and then launching a game directly and exiting via HOME will result in the system menu using an outdated cache and displaying the old game. This causes it to fail to launch the game on the disc channel (since it doesn't match the cache), resulting in it resetting (though it will ignore the cache after resetting). Not clearing the cache avoids this issue.
PNG_FORMAT_RGB and PNG_COLOR_TYPE_RGB both evaluate to 2, but PNG_FORMAT_RGBA evaluates to 3 while PNG_COLOR_TYPE_RGBA evaluates to 6; the bit indicating a palette is 1 while the bit indicating alpha is 4.
Fixes Bomberman Jetters in single core mode.
When single core mode pauses the CPU to execute the GPU
FIFO it greedily executes the whole thing. Before this commit,
Finish and Token interrupts would happen instantly, not even
taking into account how long the current FIFO window has
taken to execute. The interrupts would be effectively backdated
to the start of this execution window.
This commit does two things: It pipes the current FIFO window
execution time though to the interrupt scheduling and it enforces
a minimum delay of 500 cycles before an interrupt will be fired.
Netplay: Fix possible Wii save restore race condition between Netplay and CPU threads on game shutdown by making the Wii Save Sync data part of the BootParameters.
Being able to preserve the address register is useful for the
next commit, and W0 is the address register used for loads. Saving
the address register used for stores, W1, was already supported.
If a host register has been newly allocated for the destination
guest register, and the load triggers an exception, we must make
sure to not write the old value in the host register into ppcState.
This commit achieves this by not marking the register as dirty
until after the load is done.
This does this following things:
- Default to the runtime automatic number of threads for pre-compiling shaders
- Adds a distinct automatic thread count computation for pre-compilation (which has less other things going on
and should scale better beyond 4 cores)
- Removes the unused logical_core_count field from the CPU detection
- Changes the semantics of num_cores from maximaum addressable number of cores to actually available CPU cores
(which is also how it was actually used)
- Updates the computation of the HTT flag now that AMD no longer lies about it for its Zen processors
- Background shader compilation is *not* enabled by default
Removed useless locks to DeviceContainer::m_devices_mutex, as they were all already protected by m_devices_population_mutex.
We have no interest in blocking other threads that were potentially reading devices at the same time so this seems fine.
This simplifies the code, and I've adjusted a few comments which mentioned possible deadlock that should now be totally gone.
The deadlock could have happen if a thread directly called EmulatedController::UpdateReferences(), while another another thread also reached EmulatedController::UpdateReferences() within a call to ControllerInterface::UpdateDevices(), as the mentioned function locked both the DeviceContainer::m_devices_mutex and s_get_state_mutex at the same time.
The deadlock was frequent on game emulation startup on Android, due to the UpdateReferences() call in InputConfig::LoadConfig() and the UI thread triggering calls to ControllerInterface::UpdateDevices().
It could also have happened on Desktop if a user pressed "Refresh Devices" manually in the UI while the input config was loading.
Also brought some UpdateReferences() comments and thread safety fixes from https://github.com/dolphin-emu/dolphin/pull/9489
I haven't fully confirmed why the previous commit broke this,
but I imagine it's due to AfterDirectoryInitializationRunner
executing in a different order than before, resulting in
startRescan running before startLoad.
This decreases our APK size by a few megabytes. Most of the reduction
is from Java libraries that we only use small parts of. Code shrinking
gets rid of all the unused code from these libraries from the APK.
Because I highly value the ability to get stack traces that make
sense, I have specifically disabled obfuscation (automatic renaming
of symbols to short incomprehensible names).
I've only enabled code shrinking for release builds, purely because
I feel like the extra build time (30 seconds on my machine)
would be annoying when you want to make debug builds rapidly.
This commit changes the default value of Fast Texture Sampling to true, and also moves the setting that controls it to the experimental section of the advanced tab. This is its own commit so that it can be easily reverted when we want to default to Manual Texture Sampling.
Co-authored-by: JosJuice <josjuice@gmail.com>
Specifically, when using Manual Texture Sampling, if textures sizes don't match the size the game specifies, things previously broke. That can happen with custom textures, and also with scaled EFB copies at non-native IRs. It breaks most obviously by not scaling the texture coordinates (so only part of the texture shows up), but the hardware wrapping functionality also assumes texture sizes are a power of 2 (or else it will behave weirdly in a way that matches how hardware behaves weirdly). The fix is to provide alternative texture wrapping logic when custom texture sizes are possible.
Note that both GLSL and HLSL provide a fwidth (fragment width) function defined as `fwidth(p) = abs(dFdx(p)) + abs(dFdy(p))`. However, it's easy enough to implement this ourselves (and it makes the code a bit more obvious).
The benefit to exposing this over the raw BP state is that adjustments Dolphin makes, such as LOD biases from arbitrary mipmap detection, will work properly.
Gets rid some uses of the deprecated LocalBroadcastManager.
One note about the changes in GameFileCacheManager itself:
The change from compareAndSet to getValue followed by
setValue is actually safe, because startLoad and startRescan
only run from the main thread, and only the main thread ever
sets the flags to true. So it's impossible for any other thread
to change the flag in between the getValue and the setValue.
The past few Android releases have been adding restrictions
to what services are allowed to do, for the sake of stopping
services from using up too much battery in the background.
The IntentService class, which GameFileCacheService uses,
was even deprecated in Android 11 in light of this.
Typically, the reason why you would want use a service instead of
using a simple thread or some other concurrency mechanism from the
Java standard library is if you want to be able to run code in the
background while the user isn't using your app. This isn't actually
something we care about for GameFileCacheService -- if Android wants
to kill Dolphin there's no reason to keep GameFileCacheService
running -- so let's make it not be a service.
I'm changing this mainly for the sake of future proofing, but there
is one immediate (minor) benefit: Previously, if you tried to launch
Dolphin from Android Studio while your phone was locked, the whole
app would fail to launch because launching GameFileCacheService
wasn't allowed because Dolphin wasn't considered a foreground app.
These messages apply to the User directory regardless of
whether it's global or local, so we shouldn't specify "global".
Also changing "directory" to "folder", just for consistency
with "GC folder" in the same sentence.
Unlike with Android 11, there should be no downsides to doing
this, so we might as well get this out of the way early.
The main part of the work was already done in 5a1a642.
This should make C++20 and std::filesystem work. (Not that
we really can use std::filesystem much on Android since
it doesn't work with scoped storage...)
We implement this by first rounding to nearest integer using the current
rouding mode, then converting this value from floating point to an integral
value.
Prefer using eax to isolate the sign bit. This saves a byte when the
destination ends up as r8-15, because those require a REX prefix.
Before:
41 8B C5 mov eax,r13d
41 C1 ED 1F shr r13d,1Fh
44 03 E8 add r13d,eax
41 D1 FD sar r13d,1
After:
41 8B C5 mov eax,r13d
C1 E8 1F shr eax,1Fh
44 03 E8 add r13d,eax
41 D1 FD sar r13d,1
This function was deprecated in ffmpeg in January[1], while its
replacement got introduced in 2015[2], so now might be the time to start
using it in Dolphin. :)
[1] f7db77bd87
[2] a9a6010637
This moves the only direct call to zlib’s crc32() into its own
translation unit, but that operation is cold enough that this won’t
matter in the slightest. crc32_z() would be more appropriate, but
Android has an older zlib version…
This was originally intended to fix https://bugs.dolphin-emu.org/issues/12717 but this ended up not being the issue (instead it seems like files just weren't recompiled when imgui was updated due to MSVC weirdness). Still, using brackets instead of quotes is preferable as this is a library include.
The reload stub is at a fixed address (0x80001800) so its hook flag
should be HookFlag::Fixed.
Otherwise the hook is installed by HLE::PatchFixedFunctions but
immediately removed by HLE::PatchFunctions (which is called by
HLE::Reload right after PatchFixedFunctions).
Should fix https://bugs.dolphin-emu.org/issues/12716
This makes Android ask the user whether they want to delete user
data when uninstalling the app instead of always deleting user data,
which is pretty great now that we're forced to use scoped storage.
It only works on Android 10 and up, though.
This also may eventually allow loading patches from sources other than the 1:1 expected file structure host file system, such as memory or an archive file.
When I made 9c8bb24, I assumed it was completely impossible for a
non-preloaded app to access the entirety of the Android/data/ folder
on Android 11. This turned out to be false. While you can't access
the directory without using SAF (even if you have the Manage All
Files permission), and the user can't navigate to the folder using
the SAF folder picker, what you can do is pass the Android/data/
folder as an EXTRA_INITIAL_URI to the SAF folder picker. If the
user then presses "use this folder" without navigating out of the
folder, the app will be able to access the folder using SAF.
So what does that mean for Dolphin? It means scoped storage is a
little less bad than I feared, and I have a string to adjust.
While trying to work on adding audiodump support for CLI, I was alerted that it was important to first try moving the DSP configs to the new config before continuing, as that makes it substantially easier to write clean code to add such a feature.
This commit aims to allow for Dolphin to only rely on the new config for DSP-related settings.
Frame Advance Speed hotkeys were swapped. This likely occurred because speed and delay are inverses (i.e. a speed increase should DECREASE the delay and vice versa).
This replaces the MAX_LOGLEVEL define with a constexpr variable
in order to fix self-comparison warnings in the logging macros
when compiling with Clang. (Without this change, the log level check
in the logging macros is expanded into something like this:
`if (LINFO <= LINFO)`, which triggers a tautological compare warning.)
GCC complains about float_emit being null when inlining
ByteswapAfterLoad into MMIOLoadToReg. ByteswapAfterLoad
does dereference float_emit, but only when passing FLAG_FLOAT,
which MMIOLoadToReg has an assert for and does not support.
Also cleaning up some unnecessarily specified namespaces while
I'm at it.
The compiler was loudly announcing each and every branch Tev was not checking in
a switch statement, but Tev has learned it's lesson and will produce that
warning no more.
Reusing the slowmem handlers of existing blocks meshes badly
with reusing the empty space left when destroying blocks.
I don't think reusing slowmem handlers was much of a gain anyway.
This is done entirely through interpreter fallbacks. It would
probably be possible to implement this using host exception
handlers instead, but I think it would be a lot of complexity
for a rarely used feature, so let's not do it for now.
For performance reasons, there are two settings for this feature:
One setting which does enables just what True Crime: New York City
needs and one setting which enables it all. The latter makes
almost all float instructions fall back to the interpreter.
Instead of having a single GUI checkbox for "Always Hide Mouse Cursor",
I have instead opted to use radio buttons so the user can swap between
different states of mouse visibility. "Movement" is the default
behavior, "Never" will hide the mouse cursor the entire time the game is
running, and "Always" will keep the mouse cursor always visible.
Previously the unhide of movement mouse_timer reset occurred within case MouseButtonPress.
Additionally, there was a redundant expression in the if statement for cursor locking.
Now works with games that deliberately avoid invalidating TMEM because
they know textures are too large to fit:
* Sonic Riders
* Metal Arms: Glitch in the System
* Godzilla: Destroy All Monsters Melee
* NHL Slapshot
* Tak and the Power of Juju
* Night at the Museum: Battle of the Smithsonian
* 428: Fūsa Sareta Shibuya de
There are two reasons for this.
1. Using Dolphin's logging system lets the user decide whether
the printout should go to the terminal, the GUI, or a file.
fmt::print always prints to stdout... unless you're on Android, in
which case it does nothing at all, because Android disables stdout.
2. The Windows version of Dolphin crashes when you use fmt::print.
Yes, really. The crash happens because a call to std::fprint in
fmt::v7::detail::fwrite_fully returns that less characters were
written than requested, which fmt handles by throwing an exception.
(As always, Dolphin does not use exception handling.)
I'm not sure why std::fprint is doing this, but since switching
away from using fmt::print is a good idea due to the previous point
anyway, I'd say it's best to just switch.
Previously, if you have "Hotkeys Require Window Focus" disabled, you could repeatedly use the "Open" hotkey, for example, to stack File Open windows over top of each other over and over.
This commit allows the hotkey manager to disable/enable on QFileDialog creation and destruction.
Currently the logic for addressing the individual TexUnits is splattered all
across dolphin's codebase, this commit attempts to consolidate it all into a
single place and formalise it using our new TexUnitAddress struct.
MappingWindow is modal, yet the user can use hotkeys while the window is active. I believe hotkeys should not be recognized while this window is active.
This string is extremely likely to be mistranslated without the
proper context. Actually, it's probably impossible to translate
this string in a good way to some languages, but I'm not sure how
to solve that. Let's at least add an i18 comment for now.
PR #10066 added functionality to call std::abort when a panic alert occurs; however, that PR only implemented it for MsgAlert and not MsgAlertFmtImpl, meaning that the functionality was not used with PanicAlertFmt (only PanicAlert, which is not used frequently).
Yes, that's right! It's time to add even more NKit warnings,
because users still don't understand what NKit is or how it works!
More specifically, some users seem to be under the impression that
converting an NKit file to for instance RVZ using Dolphin's convert
feature will result in a normal RVZ file, when it in fact results in
an NKit RVZ file (since NKit is not a container format in the sense
that GCZ/WIA/RVZ/WBFS/CISO is, but rather a kind of trimmed ISO).
I can hardly blame users for not knowing this, because it's not
intuitive unless you know the technical details of how NKit works.
Previously, s_temp_input was being used for BOTH the savestate's and the movie's input printout in the panic alert.
This commit simply performs memcpy from the correct vector for the movInput printout.
Previously, the file dialog window was ambiguous between saving or loading a .dtm. This commit simply gives a bit more context to differentiate the two windows.
Previously, when playing back a movie, you could not see the total frame count of a movie, only the total number of input polls.
This change simply shows the total frame count on movie playback.
Note that this change also results in the framecount and framecount total ALWAYS being displayed if show_movie_window is true, regardless of whether or not m_ShowFrameCount is true. I believe this is fine, as TASers are much more likely to reference the framecount than the input poll count.
Previously, only the number of total input polls would be shown in the window title when playing back a movie. This simply adds the VI / frame count total as well, which is a much more relevant number to look at while TASing.
If this commit is not applied, then the previous commit will cause hotkeys to be saved if there is a syntax error when hitting "OK" and the user presses the X to close the window.
This commit only applies changes to hotkey config if no syntax error occurs.
Previously you could type whatever gibberish you wanted into the formula bar, press OK, and receive a modal syntax error window. Closing the syntax error window would cause the hotkey config window to close as well, and your gibberish would be applied to the hotkey assignment.
This commit requires that a syntax error does not occur before accept() is called.
Previously, using TAS Input to activate the digital L and R buttons would not show these inputs in the Input Display. This commit adds the digital L and R presses to the Input Display, and also displays just "L" or "R" if the analog is set to 255.
There are certain hotkeys that we absolutely want to be able to use
without being in-game. Presently, no hotkeys are recognized unless we
are in-game.
I've identified and moved the following hotkeys to be checked before the
HotkeyScheduler checks to see if the Core is running:
- Open
- Exit
- Start Recording
- Refresh Game List
Note that Play Recording should also be implemented here, however it
looks like there is no signal for a PlayRecording() function, so this
will have to be handled in a later PR once that signal is created and
implemented.
Now that we have enum helpers for inserting values into packets and have
migrated all other enumerations over, there's no need to keep this alias
around any longer.
The purpose of this class was to keep track of state which the
emulation core was already keeping track of. This is rather risky -
if we update the state of one of the two without updating the other,
the two become out of sync, leading to some rather confusing problems.
This duplicated state was removed from EmulationState in the
previous commits, so now there isn't much left in the class.
Might as well move its members directly into EmulationFragment.
Previously, it was not clear where the boundary of the StickWidget was when interacting outside of the circle. This aims to restore the gray square present in the Wx-era.
Apparently some phones (at least some from Samsung) don't expose the
system file manager in the system settings despite it being the
only on-device file manager that can open app-specific directories...
This enables scoped storage for new Dolphin installs on Android 11
and up (along with a few other changes in behavior which unlike
scoped storage are uncontroversial). Existing installs are unaffected.
We have to do this in order to be able to release updates on
Google Play from November 2021 and on.
The following settings are currently not SAF compatible,
and might never be due to the performance impact:
Dump Path
Load Path
Resource Pack Path
Wii NAND Root
This commit makes us show a message to the user if they try to
change one of these settings while scoped storage is active.
I don't want to entirely remove the settings from being listed
in the settings activity, because it's important that the user
is able to reset them if they were set to something custom in
a previous version of Dolphin.
This lets Dolphin function without the user granting access to
external storage. We need this for scoped storage compatibility.
When scoped storage is not active, we still ask for permission to
access external storage the first time the app is started so that
we can use the existing dolphin-emu folder if there is one. But
if it doesn't exist, or the user denies the permission, or scoped
storage is active, the app-specific directory will be used instead.
Special shoutout to Android for not having RTL compatible
variants of nextFocusRight and nextFocusLeft.
Ideally we would have some way to block the user from using
the d-pad to switch between the two panes when in portrait mode,
or make the list pane act as if it's to the left of the details
pane rather than the right when the details pane is open, but I
don't know of a good way to do this. SlidingPaneLayout doesn't
really seem to have been implemented with d-pad navigation in mind.
Thankfully, landscape is the most important use case for gamepads.
The way I'm implementing events using LiveData feels rather
unorthodox, but I'm not aware of anything in the Android framework
that would let me do it in a better way... One option I did
consider was wrapping the cheat lists in LiveData and observing
those, but then CheatsAdapter wouldn't know which cheat had
changed, only that there was some kind of change to the list,
necessitating the use of the not recommended notifyDataSetChanged.
Over time OnData() has become a huge function-long case statement that
attempts to manage numerous packet-related behaviors, which makes it a
little difficult to reliably ensure certain handling doesn't interfere
with another case's. It's also mildly annoying to navigate due to its
size.
To make it a little easier to read and find the specific behavior, we
can break the relevant pieces of code out into their own functions.
When RenderDoc is attached, wglShareLists fails for some reason (see baldurk/renderdoc#2361). wglCreateContextAttribsARB has a parameter for the share context, so there's no reason to use a separate wglShareLists call.
Co-authored-by: baldurk <baldurk@baldurk.org>
Previous code from #7950 only clamps correctly when the efb copies
left and top coordinates are (0, 0)
Now we should handle all situations.
Spyro: A hero's tail is an example of a game that does an oversized
EFB copy with a non-zero origin.
JosJuice
