fixed fps display in the top bar, now it shows the real fps of the game.
some code clean up and some corrections to make everything work right in the reference renderer.
multiples xfb now is broken even in single core as is was not an error caused by dual core, i really dono where the error is,everything looks correct but if you test a game with multiples xfb or the ipl you will see the error.
ector if you can take a look at he code and throw me some ideas i'll thank you.
please test.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5272 8ced0084-cf51-0410-be5f-012b33b47a6e
the problem is one strange behavior i found, in opengl when xfb is enable, frame limit causes the frame rate to be limited exact half the correct speed, so if you choose auto and the game uses 30 fps you get 15 fps
so in opengl, you have to limit to the exact double of the game speed, 100 to pal games and 120 to ntsc.
in d3d this not happened every time, it just happen when you change some time consuming setting like changing the ssaa or resizing the window, in that case you have to disable and re enable frame limit to get the correct fps
to all the devs please if you can help me debug this, will give you a lot of thanks as i'm short in time to debug this error and is driving me crazy not to find the source of the problem.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5249 8ced0084-cf51-0410-be5f-012b33b47a6e
applied mlkbouba patch to make Mario Strikers Charged Football work (i do not own the game so please test).
some minor tweaks to the plugins to improve performance. for game that do not use xfb the best settings are dual core enabled, audio throtle disabled, frame limit set to the desired value, and xfb off.
change the frameskip calculations to use fps instead of vps as in dual core vps != fps caused by unresolved sync problems, till this problems are fixed the best for game play is calculate times in base of fps.
please test and let me know the results
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5239 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented donko's xfb in D3D:
the bad things:
*is solower in some cases, slower as opengl
*it do not work in dual core mode, it seems direct3d has serious synchronization problems, to the other devs please if you can take a look and help me :)
*real xfb still not working i have to give it more time to make it work.
the good:
*games that uses multiples xfbs will work now using the virtual XFB.
*implemented a more hardware like approach to scaling, now to calculate the pixel scaling i use the xfb size not the efb so the screen pixels relation is more correct now.
*simplified a little donko's virtual xfb to make it less memory consuming as xfb textures are the exact size of the scaled xfb and not full target width.
* when it works even real xfb will let us use super sampling.
I repeat this commit is totally unstable and in dual core mode it will for sure hang the emulator or at best give totally incorrect results.
Other devs please help as thread sync is not one of my strong points :)
i'll keep waiting for the comments an the -1 :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5195 8ced0084-cf51-0410-be5f-012b33b47a6e
Basic usage: "sudo scons install=global install"
Hopefully this doesn't break builds on Macs. I have tested this on linux and windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4994 8ced0084-cf51-0410-be5f-012b33b47a6e
rewrite frame dumping and screen shots to make them more stable and correct
enable viewport resizing for all cards, the emulation is more correct in this way
test this a lot please.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4971 8ced0084-cf51-0410-be5f-012b33b47a6e
Now the frame limiter yields on CPU thread, not as before on GPU thread mistakenly
2. Fixed clear of VI interrupts
I guess VI interrupts are not used at all, because they were never cleared before
3. Made GPU thread 0% processor usage when paused whatever your active config is.
I tried the event approach but somehow the thread resume latency is excessively long (Who can tell me why?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4790 8ced0084-cf51-0410-be5f-012b33b47a6e
All you gotta do is Pause the emulation! That's useful for when your batteries run out during gameplay, for example...
But if you change the WiiMote source (between Emulated, Real or Inactive) you must disconnect and reconnect (Menu Tools -> Connect WiiMote) the WiiMotes affected by the change...
Thanks to jack.fr0st who did all the emulation state notification work!
Now every plugin has a way to know the current emulation state (paused, stopped or playing)
@ayuanx: I thought about doing a PostMessage(g_WiimoteInitialize.hWnd, WM_USER, WIIMOTE_DISCONNECT, current_number); so that the user gets asked to reconnect that WiiMote, trying to avoid having to disconnect and reconnect, but it didn't work because shooting that message only asks to reconnect, doesn't do a disconnect... Do you have any ideas on how to accomplish that?
Also, if anyone could check if Issue 1916 is finally fixed... Or at least when is the cursor being hidden or not...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4789 8ced0084-cf51-0410-be5f-012b33b47a6e
Unbreak linux stop on Single Core, remove an unnecessary wait event, fix DSP HLE/DSP LLE/OGL plugin hang on stop when the config dialog has been opened (nJoy and Wiimote still need to be fixed), avoid the CpuThread to be stuck in the efb/swap loop by setting a flag before the thread is actually shutdown (contrary to r4756 which was setting it.. after :D)
Clear the status bar Framerate/Core message when the game is stopped.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4769 8ced0084-cf51-0410-be5f-012b33b47a6e
Debugger panel is displayed only if Dolphin is started with /d option.
Dump features are not implemented.
Pause/Resume buttons works, only if the plugin is built in DEBUG or DEBUGFAST configuration, not in RELEASE. These features are really only for devs, not for regular gamers.
You will be able to pause frame by frame, or by n frames, or by n primitive flushes. Other pausing options are not implemented yet.
When other pausing and dumping features are implemented, debugging will be much easier.
I have changed the DX9 project setting to use unicode character set in order to use wxWidge tools. If this causes Dolphin building problems for you, check your project setting.txt
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4154 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix for opening.bnr containing bad chars where the loop would stop when encountering one (fixes Rogue Leader description, which was using 0x0d and 0x0a)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@3899 8ced0084-cf51-0410-be5f-012b33b47a6e
This change also includes tons of minor code formatting cleanup. Yeah, should've separated it ... sorry :(
Kills the old CPUCompare support. I'll resurrect it if I need it again, right now it mostly clutters the code.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@2321 8ced0084-cf51-0410-be5f-012b33b47a6e
2) DC/GPfifo work: GP quicker to react. PeekMessages at a more steady rate.
3) Fix XFB address to avoid crash like with Animal Crossing gc. TODO: VI regs need proper typedef and logic.
4) Few misc. changes on the fly.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@2001 8ced0084-cf51-0410-be5f-012b33b47a6e
I also added a wx debugging window for the OpenGL plugin. I connected it to the old console window that was in the plugin. Other than that it doesn't do anything at the moment but it could be useful to show all the current important information and parameter statuses and so on.
Again there's a problem with wx windows collisions. Show() can't be used because then DLL_PROCESS_DETACH is called immediately after the window is opened, and if we open it with ShowModal() before we have loaded a game the main video window will be blocked. And we can't pass on any variables from a DllDebugger() that is called when Dolphin is started because the dll is reloaded and lose all variables sometime before a game is loaded. So we can't auto open the window that way. So I made the debugging window open as a game is loaded if it is enabled in the ini, the downside is that the ini setting will open the window even if we are not opening Dolphin with the -d flag. However, this will only affect people that have used the debugger at least once so in my opinion this is the most convenient solution. But feel free to come up with a better solution. Preferably some solution to how to use Show() and preventing DLL_PROCESS_DETACH to be called.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@812 8ced0084-cf51-0410-be5f-012b33b47a6e
- Added plugin interface function Video_AddMessage to both plugins and to the plugin specs.
- Added handling of the Video_AddMessage interface export from the core side.
- Added a print on Core::Init for testing purposes (might not be the best place).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@176 8ced0084-cf51-0410-be5f-012b33b47a6e
Rodolfo Osvaldo Bogado