327515366f
cdvdgigaherz: Don't calculate the track length
...
Not really necessary.
Also fix 2 off-by-ones.
2016-11-07 00:08:23 +00:00
1f60e3101e
cdvdgigaherz: Reduce disc info ioctl calls
...
It's rather unnecessary to use the same ioctls multiple times per disc
when the info returned doesn't change. Just use each ioctl once and
read/calculate all the necessary info all at onace.
This also fixes an issue where the IOCTL_DVD_START_SESSION ioctl is
repeatedly used if the returned session ID is 0. The previous code
assumed that 0 was not a valid session ID and would repeatedly use the
ioctl to obtain a non-zero session ID. However, 0 is a valid session ID,
and it seems IOCTL_DVD_START_SESSION can repeatedly return a 0 session
ID even if the corresponding IOCTL_DVD_END_SESSION has not been called.
In our case, a DVD session is only necessary for DVD detection and
reading the physical format information. This fix seems to alter drive
speed behaviour.
2016-11-07 00:08:23 +00:00
f8e474a1c5
cdvdgigaherz: s/device/m_device/
2016-11-07 00:08:23 +00:00
8f11049c9f
cdvdgigaherz: Remove non-SPTI raw sector reading code
...
There doesn't seem to be any issues calling CreateFile with
GENERIC_WRITE access (which is necessary for SPTI) on a standard user
account, so the SPTI code should work in all cases.
2016-11-07 00:08:23 +00:00
f314c2a4d9
cdvdgigaherz: Simplify Q subchannel relative offset calculation
...
That way there's no need to calculate the track length for each track.
2016-11-07 00:08:23 +00:00
5d90afe648
LilyPad: Add separate bindings for each pad type ( #1609 )
...
Adds separate bindings for each of the pad types (DualShock2,
Guitar,Pop'n Music). This allows the user to change the button
configuration to better suit the Guitar and Pop'n Music pads without
messing up the bindings already setup for the DS2.
Close #1576 .
2016-11-06 21:59:19 +00:00
5ff9e94a2e
gsdx linux: align mipmapping gui option on Windows
2016-11-06 16:39:40 +01:00
107251e099
gsdx: sort crc game list
2016-11-06 16:30:51 +01:00
1547dd4215
GSDX-UI: Add Mipmap combobox
...
Mipmapping is now supported on hardware renderers thanks to Gregory. Please report any observed hardware mipmapping issues on the forums (http://forums.pcsx2.net/Thread-New-feature-Needs-testing-GSdx-HW-mode-Experimental-mipmap-support ) as potentially the HW mipmap code might still have some bugs.
2016-11-05 22:19:32 +05:30
58ed49f3c9
GSDX: Clean up warnings on MSVC
...
* Explicitly cast w_pages and h_pages into uint32.
* Prevent signed/unsigned comparison by converting lod into unsigned integer, honestly how coud a mipmapping level be negative?
2016-11-05 10:28:04 +01:00
758cf25888
gsdx: wrap bp for block ptr
...
Fix massive flickering of Beyond Good&Evil on SW renderer (HW happily overflow)
2016-11-04 23:03:12 +01:00
3d65312999
gsdx hw: remove old assert
...
Code is working fine with all formats
2016-11-04 23:02:49 +01:00
437afbbbf3
GSDX-PCRTC: Move Saturation hack to displayrect()
...
Fixes custom resolution scaling on Tribes aerial assault.
2016-11-01 17:54:46 +01:00
b871c6b46f
GSDX-TextureCache: Generalize scaling equation
...
Previously the dedicated custom resolution scaling equation was ignored for the second SetScale() call, generalizing the equations will also fix the DMC scaling issue on custom resolution. Also remove unnecessary checks for null on scale factors. The possibility for having a null scale factor value only exists on custom resolution and it will only happen on cases where the output circuit isn't ready yet. So the ideal way would be to handle all the required conditions of output circuit on "m_renderer->CanUpscale()" itself.
2016-11-01 17:54:46 +01:00
055f236aa5
GSVector: Add constructor to dispatch same values
2016-11-01 17:54:46 +01:00
aa4b2d9f3a
gsdx sw: wrap GS memory
...
Cost ought to remain small. Worst case is 2 extra "and" operation by group of pixels in scanline renderer
I think PixelAddressN functions are mostly call in the init.
2016-11-01 13:33:11 +01:00
233f66db5e
Fixed effects area wrapping calculation, which was always buggy but this
...
wasn't evident until additional addresses were precalculated.
Not expected to improve compatibility.
2016-11-01 11:12:41 +00:00
ba557e20a4
gsdx:recorder:unix: Fix thread leaking
2016-10-28 18:33:50 +01:00
7ab5cb20c8
gsdx: Don't close threads twice
...
CloseThread is called in the GSJobQueue destructor, so don't call it
again in the GSThread destructor.
Fixes #392 , which was caused by a use after free.
Also prevents pthread_join() from being called twice for each thread
on non-Windows operating systems, which is undefined behaviour.
2016-10-28 18:33:35 +01:00
bc7aa1a500
spu2-x:freebsd: Enable SDL backends
...
portaudio currently isn't providing me with sound, even though it did
before.
2016-10-27 22:03:49 +01:00
86a6f5d67c
cdvdgigaherz: s/itob/dec_to_bcd/
...
There's no need to have 2 ways to convert a u8 to a binary coded
decimal. Remove the macro version.
2016-10-26 22:11:40 +01:00
852ed21e88
cdvdgigaherz: Remove no drive support
...
It's the same as "No disc" or having no disc in the drive.
2016-10-26 17:30:28 +01:00
c023d7676a
cdvdgigaherz: Remove Source base class
...
Also remove virtuals from IOCtlSrc.
2016-10-26 17:30:27 +01:00
9f6c6d9917
cdvdgigaherz: Don't use GetFileSizeEx to get disk size
...
It doesn't seem to work for disks, and IOCTL_DISK_GET_LENGTH_INFO
usually succeeds instead.
2016-10-26 17:30:23 +01:00
9c643ae9ca
cdvdgigaherz: Remove CDVDabout and SysMessage
...
It's not accessible from PCSX2. More importantly, I don't want to port
it.
2016-10-26 17:30:21 +01:00
fb3580efa1
cdvdgigaherz: Remove unneeded code
2016-10-26 17:30:16 +01:00
5dfb7d63dc
gsdx: wrap gs page/block instead to skip them
...
Fix FMV of Thrillville when coupled with wrap_gs_mem = 1
2016-10-25 22:49:05 +02:00
db4b4fb166
gsdx ogl: keep a separate log for sw
2016-10-25 22:00:41 +02:00
cedc8aae44
gsdx: implement a shared memory to emulate the wrapping of the gs memory
...
Code can be enabled with "wrap_gs_mem = 1". Code only allow a single shared memory but
I don't think we need more anyway.
Linux only, Kernel panic expected with the HW renderer.
Fix FMV on Silent Hill 3 with the SW renderer
2016-10-25 20:29:38 +02:00
42b51611af
gsdx: don't dump debug file if not requested
2016-10-25 17:10:57 +02:00
820462dbc0
Merge pull request #1635 from sudonim1/reverb
...
SPU2-X: Reverb rewrite
2016-10-24 17:17:48 +01:00
e80ca0fa92
gsdx ogl: of course some driver don't work with GL_ARB_enhanced_layouts
...
Windows and (AMD or Intel)
2016-10-23 12:48:23 +02:00
885ef7a46f
gsdx ogl: reduce complexity of driver detection
2016-10-23 12:43:50 +02:00
565cb70875
gsdx ogl: don't request arb_texture_barrier for the SW renderer
...
Allow[1] to use the mesa software emulated driver to test EGL.
[1] also need export MESA_EXTENSION_OVERRIDE="GL_ARB_buffer_storage"
2016-10-23 12:13:57 +02:00
1668392988
SPU2-X: Mass reverb register renaming. Hopefully I didn't screw up the
...
cross-channel reflection registers.
2016-10-22 19:16:11 +01:00
9a51820dec
SPU2-X: Experimental reverb based on Dr. Hell's
...
http://drhell.web.fc2.com/ps1/ and/or Martin Korth's
http://problemkaputt.de/psx-spx.htm reverse engineering.
Negate final reverb output (don't know why but it's an
improvement when comparing the waveform).
2016-10-22 19:16:11 +01:00
01f0f436ac
gsdx linux replayer: allow to repack gs dump
...
linux_replay = -N will save N first frames to a new gs dump
Save disk space & debug time
2016-10-22 13:22:28 +02:00
99c43881df
gsdx egl: report an error if we fail to bind the openGL API
...
It seems Nvidia added openGL support in 355 (whereas I have 352 on debian).
I don't know the status on AMD.
2016-10-22 13:22:28 +02:00
d4a163e9cc
spu2: improve format consistency
2016-10-22 13:22:28 +02:00
1f44c4be2f
SPU2-X: PSX games should be able to read ENDX correctly now, which is
...
important functionality for many sound engines.
Fixed two other obvious errors in the psx compatibility merge, probably
inconsequential.
2016-10-20 04:17:03 +01:00
8fdf973e66
gsdx glsl: add basic support of GL_ARB_enhanced_layouts (GL4.4)
...
Hardcode location of interface to the location 0. If I understand the
spec correctly (unlikely), variable in interface will get successive
location.
Goal is to reduce driver work. Instead to compute some location based on
name matching approach (and silly validation), the driver can now use
static allocation.
Tests on future Mesa 13 are welcome
2016-10-19 23:03:39 +02:00
b1f2d27ddf
gsdx: move Haunting Ground CRC to dx level
2016-10-19 21:10:44 +02:00
264b764d6e
gsdx tc: improve haunting ground hack to remove the bloom effect
...
Just clear the buffer. The generic solution will be a copy from buffer A
to buffer B But it requires
1/ a big buffer A (otherwise it would overflow)
2/ a line width rescaling (+ the upscaling mess support)
2016-10-19 19:31:32 +02:00
c2cf8e528c
gsdx ogl: tekken5: only trigger channel effect shader when frame buffer is a single page
...
Fix missing model regression.
2016-10-17 19:34:55 +02:00
604d3bac3c
clang format: set SpacesBeforeTrailingComments to 1
2016-10-16 21:42:31 +02:00
8945ace3f7
GSDX-UI: Remove Trilinear options at some cases
...
Currently the Trilinear option only works on OpenGL. Remove it from combobox when other renderers are used.
2016-10-16 17:36:30 +01:00
45be4626f6
GSDX: Add an enum for texture filtering
...
Also re-order the combobox to make it look consistent with the tooltip description.
2016-10-16 17:36:30 +01:00
cc4cc342c2
gsdx hw: add a special sub target invalidation for haunting ground
...
Fix a wrong blending/blooming
Based on CRC to reduce impact on others games (speed)
2016-10-16 17:32:57 +02:00
31248da3d1
gsdx sw: Fix 16 bits date test on SSE build
...
AVX Builds were fixed in this commit a1a842b07f
2016-10-16 16:48:23 +02:00
defdd27987
gsdx: set m_nativeres to true in replayer
...
Otherwise you can't compare draw call between native and upscaled
2016-10-16 16:48:23 +02:00
f5e096a66f
spu2x: indicate pitch modulation and noise enabled status in the visual debugger
2016-10-16 14:15:12 +02:00
c284459382
gsdx tc: allow to search old depth/color in texture cache
...
But give higher priority to recent buffer.
Fix cut scene issue in Jak II (and potentially various game when EE/VU hacks are used)
2016-10-15 18:08:00 +02:00
7bb201a1d2
gsdx tc: move code to allow to lookup an older target if none was found
...
Next step is to enable it by uncommenting line 452
2016-10-14 22:03:29 +02:00
24684033ca
gsdx: enable clut_load_before_draw option on Harley Davidson (CRC hack)
...
At least the game is good until we find how the HW really behave
2016-10-14 20:47:18 +02:00
2c0a4ac906
gsdx ogl: add an extra debug log level
...
Avoid too much log
2016-10-14 20:46:58 +02:00
3c30db965d
gsdx gui: add a combo box on linux (below Interlace)
...
3 states are off/half/full. I'm too lazy to create a better combo box.
The hack option will be removed when Windows GUI is ready
2016-10-14 19:26:58 +02:00
37a1230c01
gsdx: reduce code duplication for key event
2016-10-14 19:26:58 +02:00
a4658eac24
gsdx hw: allow overlapping of texture (alpha) and framebuffer (RGB)
...
Fix HUD on Berserk
v2: use fbmask instead of hacking the target format to 24 bits.
2016-10-14 19:26:27 +02:00
25e76d0564
gsdx ogl: use an invalid value for stencil state
...
Fix shadow in WWE Smackdown Vs Raw 2006
2016-10-14 19:01:18 +02:00
51c64fcbe6
gsdx sw: trick GetFeedbackOutput to handle basic merge loopback
...
It is enough for Xenosaga.
2016-10-14 18:13:20 +02:00
deb2ed3d09
gsdx ogl: reimplement merge circuit to support feedback write
2016-10-14 18:13:20 +02:00
06055add5c
gsdx merge: get a new buffer for the feedback write
2016-10-14 18:13:20 +02:00
317a464278
gsdx shader: RGB => YUV conversion
...
Required for write feedback emulation
2016-10-14 18:13:20 +02:00
6ef5607d99
gsdx shader: add a shader to render text for OSD
...
Gregory: code extracted from the OSD PR to reduce conflict
2016-10-14 18:13:20 +02:00
d84d30fe87
gsdx: Add color component to OGL shaders
2016-10-14 18:13:20 +02:00
7ca9ca9465
gsdx: new parameter for merge virtual function
...
* Add full PMODE register to replace slbg/mmod
* Add full EXTBUF register (will allow to emulate write feedback)
* Add a third source (which will actually be the destination of the
write feedback)
2016-10-14 18:13:20 +02:00
357dcdb55e
GSdx: Move alpha stencil hack back to original location
...
Avoids skipping the alpha stencil hack.
2016-10-14 16:36:17 +02:00
fbf7ccbdda
gsdx: by default new will throw std::bad_alloc
...
So catch/use it and don't bother with GSDXErrorOOM
2016-10-13 20:44:59 +02:00
c440c7c93a
gsdx gui: update the filter combox box with new trilinear options
...
OpenGL only
v2: update setting tooltip based on turtleli feedback
2016-10-13 20:16:38 +02:00
5ced9c1f19
gsdx mipmap:ogl: plug trilinear/mipmap2 option
...
mipmap option 3. Actually maybe a separate tri-linear option will be better
m_mipmap == 2 => use manual PS2 trilinear/mipmap
Otherwise
m_filter == 3 => always use full automatic trilinear interpolation
m_filter == 4 => use automatic trilinear interpolation when PS2 uses mipmap
m_filter == 5 => like 4 but force bilinear interpolation inside layer
2016-10-13 20:16:38 +02:00
c2777ff989
gsdx state: split IsMipmapActive in 2 pieces
...
This way we can test if a draw call requires a triliner filtering.
It will be used in next commit to implement automatic trilinear
2016-10-13 20:16:38 +02:00
1b9b47dd6a
gsdx mipmap:ogl: add capabilities to automatically generate mipmap layer
2016-10-13 20:16:38 +02:00
510eccd471
gsdx mipmap: enable fully tri-linear filtering
...
(when mipmap > 1)
2016-10-13 20:16:38 +02:00
a8a2db8eb1
gsdx mipmap:ogl: extend HW sampler with tri-linear filtering
...
v2:
* use nice enum
* use bilinear info when there is no mipmap (more accurate)
2016-10-13 20:16:38 +02:00
335d7f3ae5
gsdx: add a nice enum for min filter
2016-10-13 20:16:38 +02:00
7ea0e90678
gsdx mipmap:ogl: extend shader to support trilinear filtering
2016-10-13 20:16:38 +02:00
d185a85a07
gsdx ogl: replace simple_sample variable by the opposite shader_emulated_sampler
...
It feels easier to read this way
2016-10-13 20:16:38 +02:00
ae441e6a2c
gsdx mipmap:HW: Update all valid texture layers
2016-10-13 20:16:38 +02:00
5d593dd948
gsdx mipmap:HW: save state of both min&max lod values
2016-10-13 20:16:38 +02:00
15b1d8d3f0
gsdx mipmap:tc: add code to update a single layer of a mipmap
2016-10-13 20:16:38 +02:00
dbb4bdf59f
gsdx mipmap:ogl: add GL_TEXTURE mipmap support
...
* Allocate more memory for extra layers
* Allow to upload data in any layers
2016-10-13 20:16:38 +02:00
76bd968c59
gsdx mipmap: extend texture/cache to support a layer parameter
2016-10-13 20:16:38 +02:00
b695e0065a
gsdx mipmap: use a 3 state option
2016-10-13 20:16:38 +02:00
679f3347bb
cdvdgigaherz: Read raw CD sectors one by one ( #1590 )
...
A multi sector raw disk sector read that reads data from two tracks of
different types will not complete successfully. Reading the sectors one
at a time should fix the issue.
2016-10-10 22:33:15 +01:00
039573b133
clang-format spu2x
...
Note: it doesn't play well with define around forceinline (might need to fix the inline btw)
And a single macro in RegTable.cpp
2016-10-10 20:41:24 +02:00
36631f2270
remove a useless define
...
cosmetics
more cosmetics
some more cosmetics? sure!
whitespaces
whiterspaces
2016-10-09 20:10:53 +02:00
95fe77a594
bad merge fix
2016-10-09 16:15:19 +02:00
19a8ed8b25
psxmode: Spu2x: more native SPU2 reghandlers. first "working" reverb! (everything before was just random data)
2016-10-09 15:52:47 +02:00
ee05137415
psxmode: Spu2x: add reverb register handling, fix a problem with the address translation, re-enable "VMIXEL" writing (which should just be named Echo/Effect ON or EON really)
2016-10-09 15:52:47 +02:00
1ec70f1df3
psxmode: Spu2x now working correctly. Kudos to pseudonym. Took him 30 minutes to fix this!
2016-10-09 15:52:46 +02:00
08b6edae80
psxmode: further spu2x work
2016-10-09 15:52:45 +02:00
3aabc1adbf
spu2x work 1
2016-10-09 15:52:05 +02:00
9af34cc611
gsdx tc: miss a set scaling call
...
Likely impact issue #83/#694
2016-10-09 13:07:08 +02:00
3b733930fe
gsdx: UserHacks_TextureInsideRt must be disabled by default
...
Likely a bad copy/past
2016-10-09 12:13:37 +02:00
344636d88e
gsdx ogl: attach input texture before copy
...
Help to ensure with copy the good texture in debugger
2016-10-08 23:42:39 +02:00
22ebdcf1cf
gsdx debug: create a nice dump function for kernel gs registers
...
Add missing register
2016-10-08 23:42:39 +02:00
ab228c8484
Added missing CRC for Grand Theft Auto San Andreas.
2016-10-08 18:38:50 +03:00
db853b4462
GSdx: Add Jak 2 US CRC to GSCrc list.
...
Fixes issue: https://github.com/PCSX2/pcsx2/issues/1603
2016-10-07 13:14:15 +03:00
574a807678
gsdx tc: new hack to extract texture from rt
...
UserHacks_TextureInsideRt = 1 (don't look at Jak)
2016-10-07 01:43:04 +02:00
8873b27eb8
gsdx: let's keep the new clut option off
...
There are still issue with virtua fighter (albeit my dump is better...)
2016-10-06 22:05:03 +02:00
79666b26c0
gsdx sw: restore the const reference
...
It was removed for PSX hack which was removed a couple of commits ago
2016-10-06 20:02:22 +02:00
c66004bbb2
gsdx: hidden option to better support dual context clut
...
Option is on by default. Just a safety net in case of regression
Fix clut issue on virtua fighter (SW) and harley davidson (SW/HW).
2016-10-06 19:08:21 +02:00
9cd4984f7c
gsdx debug: more log
2016-10-06 18:56:31 +02:00
d827497403
gsdx: let's handle illegal 4 bits format too
...
In doubt if some games use them.
2016-10-05 22:07:49 +02:00
9b93c07339
gsdx: Handle illegal 8 bits format. Found the most silly GS dev trick
...
Fix Berserk #1526 Well done guys but we're more clever than you ;)
So instead to mask the color channels as any guy that RTFM, they decided to use the illegal 8H frame format
2016-10-05 22:07:43 +02:00
6fd46eb36a
gsdx: move the validation of the texture format before the draw call
...
Avoid false positive when game write dummy stuff
2016-10-05 22:07:23 +02:00
a0629587be
gsdx memory: implement read texture of PS GPU24
...
convert the swizzled block as tightly packed 24 bits RGB
Then convert scanline to standard 32 bits RGBA
The HW renderer requires the preload data hack
2016-10-05 21:59:42 +02:00
1c900e780a
gsdx memory: add a PS GPU 24 bits format
...
Same swizzle as 16 bits. But contains tightly packed RGB pixels.
2016-10-05 21:06:38 +02:00
1cc696ab31
gsdx hw: update TEST.ATE field after ATE optimization
...
Otherwise DoFirstPass/DoSecondPass will give you result based on pre-ATE optimization
Close #1607
2016-10-05 09:43:24 +02:00
3653a7746a
gsdx psxmode: small hack to "see" video until we found a better solution
2016-10-05 09:43:24 +02:00
677f890c5c
gsdx debug: static GSState::s_n
...
This way you can access the current draw call anywhere. Very useful for debug.
2016-10-05 09:43:24 +02:00
61333ecb40
gsdx debug: trace register access
...
I didn't include high frequency register such as vertex stuff
main goal is to give the possibility to trace the texture/clut update
2016-10-05 09:43:24 +02:00
1b8d6a38e7
Merge pull request #1586 from PCSX2/gsdx-refresh-gui-options
...
Gsdx refresh gui options
2016-10-04 18:30:48 +02:00
354aa6831b
gsdx ogl: brain hang in the middle of the line
...
Only impact if bilinear is forced
2016-10-03 18:52:02 +02:00
5b72fab2e4
gsdx ogl: depth regression from 866173a481
...
Only mask depth if the min value is too big
Issue #1602
2016-10-03 18:32:54 +02:00
3be055a366
gsdx hw: remove code to detect an effect
...
It was a tentative to emulate GTA radiosity but the new hack is more generic
2016-10-02 18:29:23 +02:00
49c44db635
gsdx:dx: make filtering right
...
WMS/WMT 2 is the region clamping mode.
Hw unit can't emulate it right so it can give you bad filtering (Fix #1025 )
Note: I only did the fix because I wanted to remove the TEXA hack. Otherwise
it is still recommended to use openGL
2016-10-02 18:21:52 +02:00
7f4791fa85
gsdx hw: improve no_ds detection
...
Support ZTST_NEVER as no depth read => psx mode speed boost
Use zm/fm to reduce further depth lookup
2016-10-02 18:21:52 +02:00
c3ac3ecbe7
gsdx hw: move try alpha test at the beginning
...
Will allow to use alpha test optimization to better optimize depth lookup
Require to do clut handling before
2016-10-02 18:21:52 +02:00
dc365e066d
gsdx tc: remove old plain TEXA hack
...
It must work fine without it now.
From the google code comments:
It would be nice to test those games
* Ar Tonelico 2 (line in sprite regression?)
* breath of fire dragon quarter (overlayed user interface in the game)
v2: update Dx code to use the good format
2016-10-02 18:21:52 +02:00
cf13cccb1e
gsdx: avoid useless spamming of INVALID PSM in release build
2016-10-02 18:21:41 +02:00
955a69b16e
gsdx ogl: fix GT4 regression (wrong texture on timing)
2016-10-02 12:16:48 +02:00
c7c6566bca
gsdx hw: of course the full Jak series will kill me
2016-10-02 11:57:09 +02:00
b6638d4eec
gsdx hw: forgot to comment an unused variable
...
Keep the code in case, we better solution is found to validate the depth/frame format
2016-10-02 10:18:15 +02:00
3996fbe365
gsdx hw: reduce conplexity around TryAlphaTest
...
* As sw renderer, don't bother to bypass it when it is ATST_ALWAYS
* Don't update the ATE register value
=> It is a really bad idea. Next draw call will be wrong if TEST register isn't written.
The TryAlphaTest context could have been updated
2016-10-01 19:20:49 +02:00
c5f086b385
gsdx ate: separate the code that depends on TEST.AFAIL
...
Easier to read and allow a switch optimization
Add a shortcut for the common ATST_ALWAYS case
2016-10-01 19:20:38 +02:00
4612b79575
gsdx: add a warning on vertex trace
...
Due to a division by 2, depth lsb bit is always 0
I'm not sure it is critical but let's keep a note for the future
2016-10-01 19:16:44 +02:00
d1e07295e7
gsdx linux: add the missing gui option for unscale point/line primitive
2016-10-01 19:16:44 +02:00
5e1064da55
gsdx: remove the safe accurate blending hack
...
V2: Integrate Flatout patch to do the Window side
2016-10-01 19:15:52 +02:00
f77c1900fa
gsdx tc: always clear a new depth buffer
...
Random data isn't a good idea for a depth buffer. It can cause flickering. (Jak2 FMV)
Hopefully it won't impact too much the speed.
2016-10-01 19:00:17 +02:00
9c84712640
gsdx hw: enable palette read back on Jak2
2016-10-01 18:47:21 +02:00
5d93a392e4
gsdx hw: xman half screen correction
2016-09-30 22:25:24 +02:00
29c25bc375
gsdx clut: disable some assertions often fired
2016-09-30 22:24:38 +02:00
34686394a6
gsdx hw: add an hack for Jak3
...
I'm disappointed...
Read back palette written by the GPU. Avoid strange color on the skin.
2016-09-30 19:22:16 +02:00
df2f8684d6
gsdx: improve TC cache log
2016-09-30 19:18:58 +02:00
8d24aa2b39
gsdx: GoW2 half screen bug
...
... Seriously ...
2016-09-30 19:15:25 +02:00
fc32b749dd
onepad: fix a pad regression on odin sphere
2016-09-30 10:25:14 +02:00
8d4fadb3c8
Revert "gsdx state: TEX0 write behavior might depends on the context"
...
This reverts commit b34243fa7b
2016-09-28 20:00:56 +02:00
90ad9cf668
gsdx hw mipmap: tune the rounding + remove previous hack
...
GS really uses an invalid texture located at 0.
Improve the rounding for R&C. The idea is to avoid the corner case were only
the corner of the triangle touch the 7/16 edge.
2016-09-28 19:41:12 +02:00
adb8be3287
gsdx: add/update comment
...
Need to investigate why the number of vertex is different in upscaled resolution
2016-09-28 19:41:12 +02:00
749037346c
gsdx: report an error if PSM is invalid
2016-09-28 19:41:12 +02:00
fea31f7422
gsdx: don't use virtual when it is useless
2016-09-28 19:41:11 +02:00
97172f5e51
gsdx debug: count draw call in a different way
...
* Always do +1 before the draw call
* Prefix texture name with i (as input) to keep them before the FB
Goal is to ensure that all renderers share the same draw call value.
2016-09-28 19:41:11 +02:00
b34243fa7b
gsdx state: TEX0 write behavior might depends on the context
...
Game: harley davidson
* write tex0 ctx0
* write tex0 ctx1
* draw ctx 0
Previous GSdx behavior will load the clut every write of TEX0. In the
above case the draw will take the wrong clut.
To be honest, it could be a wrong emulation on the EE core emulation.
The hardware likely got a single clut (1KB cache is quite expensive)
So clut loading must be skipped if the context is wrong.
Next draw will use the ctx1 clut so I apply TEX0 when the context is switched
Please test harley davidson :)
v2: detect context switch from UpdateContext function
V3: always set m_env.CTXT[i].offset.tex, avoid crash (Thanks to FlatOutPS2 that spot the issue)
V4: move bad psm correction code (rebase put it in the wrong place)
2016-09-27 10:04:09 +02:00
e0961d81a0
gsdx HW: use after free crash
...
Free bt
3 0xe676d194 in ~Source ../plugins/GSdx/GSTextureCache.cpp:1526
4 0xe676d194 in GSTextureCache::SourceMap::RemoveAt(GSTextureCache::Source*) ../plugins/GSdx/GSTextureCache.cpp:1990
5 0xe676f0fe in GSTextureCache::IncAge() ../plugins/GSdx/GSTextureCache.cpp:1022
Use bt
0 0xe6772a83 in GSTextureCache::LookupSource(GIFRegTEX0 const&, GIFRegTEXA const&, GSVector4i const&) ../plugins/GSdx/GSTextureCache.cpp:204
1 0xe66b0c9f in GSRendererHW::Draw() ../plugins/GSdx/GSRendererHW.cpp:579
2 0xe66fb43e in GSState::FlushPrim() ../plugins/GSdx/GSState.cpp:1509
Hypothesis the m_map array of list contains an invalid pointer
It is populated GSTextureCache::SourceMap::Add based on the coverage. The coverage is based on the offset.
So offset is potentially wrong. As mipmap code hack the offset value. It would be a nice culprit.
This commit avoids a potential bad transition between MIPMAP (which
overwrite the "offset") and the base layer (which wrongly keep an old "offset")
Conclusion, pray for my soul as it is very hard to reproduce
2016-09-26 20:34:38 +02:00
04d82d8127
gsdx: size doesn't count but 0.625 might change your life :p
2016-09-26 19:42:07 +02:00
be9995bd1e
gsdx mipmap: improve robustness to avoid potential crash
2016-09-26 09:27:03 +02:00
ebb2a8ad5a
gsdx debug: Add DISABLE_WIP_ASSERTION
...
To easily disable assertion on codes that only require investigation
2016-09-25 20:00:51 +02:00
ca4f265ce6
gsdx debug: dump mipmap register could be useful now :)
2016-09-25 20:00:51 +02:00
ef9a144437
gsdx hw: extra trick for the mipmap
...
Ratchet & Clank (the third) uses an address of 0 for invalid mipmap.
It would be very awkward to put the middle layer of texture in start of
memory. So let's use this information to correct the lod.
It make the game more robust on the lod rounding
2016-09-25 11:54:00 +02:00
Jonathan Li