It would requires some texture dynamic width convert shaders.
So as a quick solution, let's add a new CRC hack.
For issue #1362 (granted the CRC is correct)
So let's increase the height. It will increase the memory requirement on some games
v2: try to do it automatically
(not sure it will useful as most game will requires it)
v3: let's back to an hardcoded 1280 size. It generates too much issue
Try to avoid random black screen frame
v2: don't force the preload hack on the frame
It creates a ghost image over FMV
v3: support offset within a frame
The long story:
Game blits FMV far aways of the RT which is actually the input of the RO texture...
Currently GSdx suffers of 2 bugs.
1/ RT is too small
2/ texture isn't properly updated with the rendered value. Texture is invalidated
but it reads back the pixels from the GS memory whereas the correct
value is located on the GPU.
This commit will replace the standard draw by a manual blit. Therefore it avoid
size issue and bad upscaling issue.
v2:
* Use various copy to be more compatible with dx api
* Move all part of the hack info the BlitFMV function
v3: add log message
There are likely few games (RE4) which constantly change the FBW register value causing the framebuffer width to be updated at every interval. Adding a safe limit (512) similar to frame buffer height would prevent such constant changes of the framebuffer width when FBW changes once again to an even lower value.
Valid values for png_compression_level are from 0 (no compression) to 9
(max compression). The default is 1.
v2: Use zlib Z_BEST_SPEED (1) and Z_BEST_COMPRESSION (9) defines.
The following patch uses the height value of the display rectangle rather than make an estimation of the Frame buffer height when the game uses a non-referenceable height (or) width.
Don't lookup a depth buffer if depth test is always pass without write
Boost performance on Tekken5 when depth emulation is enabled in openGL
(Tekken5 sets same address for both the RT and the depth but depth is disabled)
v2:
Keep ds if DATE is enabled (some implementation uses a stencil buffer)
Be more aggressive to avoid an useless depth lookup
A couple of useless members were removed too.
Also fix wnd initialization
Coverity:
CID 146955 (#1 of 1): Uninitialized pointer read (UNINIT)
18. uninit_use: Using uninitialized value wnd[i].
This is the internal resolution which GSdx uses and recording at this resolution
is optimal, i.e. without any dumb scaling, with all relevant pixels and without
redundant pixels.
The resulting clip still doesn't have the correct aspect ratio set, but that's
just a property which can be set to the clip afterwards, which is where the DAR
becomes useful. Since it's usually anamorphic, when muxing later with the audio
use the DAR to set the playback aspect ratio.
gsdx changes:
Remove native resolution checkbox from GUI and rework associated code
Small changes to Windows and Linux GUI
Support 8x native resolution
Fix custom resolution width less than native width use case
This fixes the following issues when custom resolution is selected.
- When the width is smaller than the native resolution width, the
texture cache targets are removed on every Vsync signal, causing a
black screen issue.
- The texture cache code needs a 1 returned for the custom resolution
upscale multiplier or there'll be some really funny graphical issues.
It also removes unnecessary GetConfig (which I think unconditionally
does a a file read on Windows) calls if the width was increased - the
upscale multiplier is already stored, and the custom resolution width
and height calls are now unnecessary.
Also fix some whitespace issues.
upscale_multiplier function values have been changed to allocate native resolution and also move custom resolution to 9.
Remove the old native checkbox value and include Native in the combo box.
Internal GSDX functions have also been updated with this new update to the upscale_multiplier variable.
* Greatly reduce the number of clut read (factor 10x)
* Avoid to get wrong TEXA texture in the cache.
* Fix "jump depends on uninitialized variable" Valgrind warning.
Fix#748
I try my best to avoid any breakage of DX but please test it too.
CID 146833 (#2-1 of 2): Division or modulo by zero (DIVIDE_BY_ZERO)
divide_by_zero: In expression this->m_width / this->m_upscale_multiplier, division by expression this->m_upscale_multiplier which may be zero has undefined behavior.
I used to disable the RT but it doesn't work well with 50cents. It seems
texture writes weren't propagated correctly to the depth buffer. Besides
the game write an alpha value whereas depth is 24 bits only...
Fix depth issue.
First issue: RT and Depth are located at the same address.
=> solution, just lookup the depth (done for any games)
Second issue: Instead to draw a X,Y rectangle, they draw a 32 pix, 4096 pix
rectangle with a FBW of 1.
=> solution, don't bother just write the depth directly
Please someone add some CRC to enable the code
Game can directly uploads a background or the full image in
"CTRC" buffer. Previous code was a full black screen.
It will also avoid various black screen issue in gs dump.
hidden option: preload_frame_with_gs_data
Note: impact on upscaling was not tested and it's likely broken
To clear a (W, H) RT/Depth, GS can only send a (W , H/2) primitive with
a Z (or RT) pointer in the middle of the buffer
Top-half will be cleared by the color (or the depth).
Bottom-half will be cleared by the depth (or the color).
Code isn't enabled yet but it was tested with success on GoW2.
Gow uses 24 bits buffer, so only color is updated but blending is configured as Cd
so it is a NOP
In this case, we don't lookup the target in the texture cache. It reduces the complexity
to handle depth which can be located at same address as RT
Note: please test DX renderer
Old way various check boxes to configure the plugin
New way an unified drop down list
* Level 0 (dev only) => disable (mostly) all hacks and auto skip depth.
* Level 1 (dev only ) => enable oi/oo/cu hacks, others remains disabled
* Level 2 (GL) => enable most hacks except a couple of one that were fixed on openGL (speed impact)
* Level 3 (DX) => enable all hacks
* Level 4 => enable also aggresive CRC
Note: windows gui must be updated, and it will be nice to create a global tooltip
-Last commit broke Snowblind games again
-Width now based on output circuit
-Try to use the smallest possible while being at least the size of the screen
The idea is to easily extract bad frame from gs dump and to compare them
with the sw renderer.
Here the summary of the options:
savet => dump all input textures
save => dump the render target
savez => dump the depth buffer
savef => dump the frame
* Dump context before the increase of s_n
=> aligned with the global call number
* Don't print colclip not supported when it is optimized away
* dettach the input texture when it is useless
=> avoid to show a wrong texture in the debugger
Group opengl calls into a nice name.
Apitrace shows them in a tree format that support folding. Previously it
was a long flat list (10K-40K of lines by frame)
I align the call number with the internal s_n variable. This way it is
easy to map GSdx dump output with the GL debugger :)
0: don't dump input texture
1: dump input texture
Now, you can do a first pass with only RT. When you find the wrong call, you can redump the input texture of the bad draw.
It works as bad as a "clever" implementation.
It seems to be enough for games such as venus/taisho-monoke/FFX
Note: it might creates glitches. Code will never be nice, so it is just
a trade-off
-1 is annoying because minimum value is 0. Instead to add more logic,
let's try to use 0 which seems to be good enough (fix regressions on DQ8/AT)
Unfortunately it causes a mini regression on taisho-mononoke. Rotation of sprite is done with 2 triangles.
Potentially previous value wrongly recover this section.
Tekken is broken with setting UserHacks_round_sprite_offset = 2 use 1 instead.
=> game use upscaling internaly so my rounding of coordinate break everything
Yakuza uses float coordinate but this hack only correct the integer coordinate
=> the solution will be to add a dedicated hack for this game.
Colin3 got a regression but I don't know when...
PS2 uses a -0.5 offset before sampling so texels must be rounded to half-pixel boundary
If fixes glitches on Venus and taisho-mononoke
Note: I didn't fixed yet texture render in reverse because I don't have any test for it.
UserHacks_round_sprite_offset = 1 <= enable correction of flat sprites
UserHacks_round_sprite_offset = 2 <= enable correction of all sprites (better on a couple of dump but not sure of the consequence)
I completely redo the algorithm. This time I do the projection and
interpolation of the 2 extrem vertex. This way I can compute the min/max
valid texture coordinate.
It gives stronger guarantee that texture sampling will be done inside the texture.
However it might have a performance impact, likely reasonable because it
is limited to sprite vertex.
A big thanks you to all people that provide me GS dump and test reports.
It is replacement of the previous hack (UserHacks_stretch_sprite). Don't enable both in the same time!
The idea of the hack is to move the sprite to the pixel boundary. It
avoids most of rounding issue. It also rescales verticaly the sprite (avoid horizontal line on ace combat).
I don't like this rescaling maybe we can limit it to only 1 pixels.
On my limited testcase, results are much better with any upscaling factor.
I still have a bad line in Kingdom heart. If you have issue with others
game please provide us a GS dump.
2x upscaling is pixel perfects. Bigger upscaling is better but not yet perfect
Feedbacks are welcomes (note it doesn't solve all upscaling issue, only wrong texture sampling)
For the history:
If you have a texture of [0;16[ texels and draws a primitive [0;16[
The formulae to sample last pixels of texture is
0.5 + (16*s-1)/(16*s) * 16
Native (s==1): 15.5 (good)
2x (s==2): 16 (bad, outside of the texture)
4x (s==4): 16.25 (bad, really outside of the texure))
HTB123 on our forums came up with a hack that removes the broken main character shadow in hardware rendering
in SMT Nocturne.
This should work for all GSdx recognized versions / regions of the game (tested EU and NTSC-U).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5819 96395faa-99c1-11dd-bbfe-3dabce05a288
* use svnrev.h on linux too
* replace sprintf_s with snprintf (hope it still compile on Windows)
* init integer with 0 instead of NULL
* various int -> u32/uint32/uint on for loop index
* remove a couple of unused variable
* init few variable
* disable unused warning results
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5683 96395faa-99c1-11dd-bbfe-3dabce05a288
- changed the KH2 fix in GetTextureMinMax to my taste, should give the same results, when the used texture rect is to the left/above the clamped area, it returns [min, min+1], and [max-1, max] for right/below
- m_mem.m_clut.Read32 was returned to its original place from GetAlphaMinMax
- UserHacks_WildHack was moved up to GSState, special UV handlers are only used when this setting is active
- updated xbyak to the latest available (avx2 seems incomplete, the 256-bit promoted old instructions are missing)
- changed vtune's include path to the 2013 edition
Some other not yet commited changes from a year ago:
- WriteImageX overflow crash-fix
- moved colclamp after dithering (sw mode), it makes more sense, no visible changes noticed
- Gif_Tag::analyzeTag(), there was a conditional I didn't like, split the loop into two parts
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5649 96395faa-99c1-11dd-bbfe-3dabce05a288
- Removed the #define DISABLE_CRC_HACKS (since it's at the GUI now).
- reverted r5315 and r5319 (which prevented gs dumps to have a correct CRC).
- Restored the functionality of these revisions via simple skip of the other hack calls.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5320 96395faa-99c1-11dd-bbfe-3dabce05a288
Added interface.cpp (plugin/pcsx2 interface) and savestate.cpp to SPU2ghz, to help clean up SPU2.cpp.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@463 96395faa-99c1-11dd-bbfe-3dabce05a288
Gregory Hainaut