GSDX: Improvements to the config interface.
- GSDX: Add new logos to dialog
- GSDX: Remove all the extra null renderers
- GSDX: Changes to renderer combobox
- Sort all the renderers in ascending order. (the fact that D3D11 was
above D3D9 really annoyed me >_<)
- Properly display usage of D3D10/D3D11 on the combobox.
- Use highest available version of DX by default.
- GSDX: gray out upscaling hacks at native resolution
- GSDX-PSX: Modifications to the dialog
- Add new logos
- Remove SDL renderer from combobox since it was removed long ago.
Fixes an issue with the D3D backends crashing if the configure dialog
is accessed and ok is pressed. The D3Dcompiler dll is freed and a null
pointer is dereferenced.
It might break gsdxgui but GSshutdown really should not be called unless
GSdx is shutting down. GSDumpGUI on Windows provides the same (or
better) functionality.
1. Add GS_Renderer Enum
Replace all instances of int/uint32 renderer identifier by a strongly
typed enum and appropriate casts.
Only instances in GS[*].cpp/h classes were touched. GPU[*].cpp/h classes
do not to follow the same convention.
2. Add default renderer according to OS
The default renderer is OS dependent (Win -> Dx9HW, others -> OGLHW).
Consequently one should always check againt the appropriate default
value on config load.
The old behaviour was only - if a at all - problematic if the respective
element in the gsdx.ini was missing and probably even then didn't create
issues. The current implementation is still more stable and does not
depend on the implementation of GS.cpp -> GetConfig()
A couple of useless members were removed too.
Also fix wnd initialization
Coverity:
CID 146955 (#1 of 1): Uninitialized pointer read (UNINIT)
18. uninit_use: Using uninitialized value wnd[i].
Without this patch, if a user initiates a recording and then cancels at the GSdx
dialog, the audio was recording anyway, which is probably highly unexpected.
However, while probably highly unexpected, it could still be useful to record
only audio, but with this patch it's now impossible.
We can reconsider if it turns out that people are actually using this "feature",
though one might as well set the video setting to be very unobtrusive (very low
resolution/bitrate) such that it uses very little CPU.
CID 146835 (#1 of 1): Division or modulo by float zero (DIVIDE_BY_ZERO)
50. divide_by_zero: In expression (float)(end - start) / (float)frame_number, division by expression frame_number which may be zero has undefined behavior
Nvidia allows to get the ASM of the shader of the compiled shader. It is useful
to check the performance.
It also allow me to compile most of shader code path for QA
Dump is enabled in linux replayer + debug_glsl_shader = 2
Rework the renderer selection logic to reload the saved renderer after
it's been changed in the config panel and to properly detect whether a
renderer toggle has been requested.
Changed the name of the Direct3D renderers so they would match the way
they are named in GSdx's Plugin Settings window. Also changed a printf
to say OpenCL instead of opencl.
Initially we copy pitch by line in the PBO and tell the dma to only
use the first valid byte.
Now, we only copy useful data to the PBO. It reduce the copy and PBO memory requirement.
It seems a bit faster on native resolution
0: don't dump input texture
1: dump input texture
Now, you can do a first pass with only RT. When you find the wrong call, you can redump the input texture of the bad draw.
deassert gsopen_done before delete the gs object. Compiler and CPU will
reordonate the store (or not because it is a global variable). Probably not
perfect but better.
Got a crash on GSKeyEvent which I guess wasn't thread safe. So let's ensure
gs is open.
1/ initReadFifo will be first called on the GS thread
(openGL can only be done on the GS thread)
2/ readFifo will be called on the EE thread. It is not safe too access eeMem from GS
because of memory is virtual
Fix "recent" regression (crash) on Kingdom heart and others game too.
v2: add a len check on GSState::InitReadFIFO
This hack was used because GSReadFifo was called from the EE thread.
Previous commit move the call to the GSThread.
Hopefully avoid flushing the full GPU contex would improve openGL
performance (at least avoid some hiccups ;) )
Note: newer GSdx ogl won't be compatible with older PCSX2
This fixes the crashes on F9 for me. We don't want to call GSgetTitleInfo2() when GSOpen() isn't finished yet.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5834 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to use more subroutine on VS&PS, unfortunately hit a driver crash!
* Call Attach/DetachContext through GSDevice so I can unmap currently mapped buffer
* Implement glsl part of GL_ARB_bindless texture, again hit another driver crash!
* various fix of GL_ARB_buffer_storage. Basic benchmark show only improvement on 'cold' case, I guess it will improve smoothness
* try to fix GL_clear_texture, no success so far. It seem the extension is limited to basic texture (aka no depth/stencil)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5752 96395faa-99c1-11dd-bbfe-3dabce05a288
* GL_ARB_shader_subroutine for perf
fix for nvidia => add missing shader declaration. Nvidia got +4fps on colin3 :)
For the moment only 2 PS parameters are supported. Code need to be extended to support others games that often
switch shader program (like xenosaga).
require GL4 class hardware and the option override_GL_ARB_shader_subroutine = 1
Note: strangely on AMD linux it is slower!
* GL_ARB_shader_image_load_store for accuraccy (Date)
Use a signed integer texture and reenable color buffer writing
Current status: Amagami_transparency.gs & P3_battle_shadows.gs are now working on Nvidia with a small perf impact.
Current implementation detail:
1/ setup the standard stencil as before
2/ on remaining pixel, draw once to compute first primitive that will write a fail alpha value.
3/ final draw based on primitive id of step 2
Note: I think we would get a bad behavior if depth test&mask are enabled on step 2/3
Note2: on my limited testcase the perf impact was on CPU. It would be possible to merge step1&2 to nullifying it (could
even be faster actually), however it would require more GPU power.
Again require GL4 class hardware. And the option UserHacks_DateGL4 = 1
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5725 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a non-working hack: UserHacks_DateGL4, goal was to replace UserHacks_AlphaStencil
+ Detection of good/bad samples is based on primitive ID variable. However I'm not sure
the behavior is always the same between draw call...Anyway let's keep a copy of the current
work
* Dump integer texture into text csv
* add gl4.2 ARB_shader_image_load_store extension (needed by UserHacks_DateGL4)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5707 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to switch renderer with F9
* skip first frame in stat of the replayer
* drop msaa. Fxaa and internal resolution will do the job
* move texture attachment from texture object into device object (allow to keep sanely the state)
* split the write buffer and attachment setup
* completely split sampler and texture input setup
* redo GSDeviceOGL::CopyOffscreen to avoid an extra copy.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5704 96395faa-99c1-11dd-bbfe-3dabce05a288
* use gles header file, disable opengl code (mainly GLX, ARB_sso, geometry shader)
* Define properly the function pointer, GLES use basic linking whereas GL must get the symbol dynamically
* cmake: properly search and set libglesv2.so
* don't use dual source blending => HW renderer work (only miss unimportant FBA)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5701 96395faa-99c1-11dd-bbfe-3dabce05a288
* use svnrev.h on linux too
* replace sprintf_s with snprintf (hope it still compile on Windows)
* init integer with 0 instead of NULL
* various int -> u32/uint32/uint on for loop index
* remove a couple of unused variable
* init few variable
* disable unused warning results
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5683 96395faa-99c1-11dd-bbfe-3dabce05a288
* Separate state and shader compilation into separate function
* replace various hash_map by basic array
* Compact VertexScale and offset into a single vec4
* add the new option "ogl_vertex_subdata": subdata is faster on FGLRX, test are welcome on Nvidia drivers
0 => use map/unmap
1 => use subdata
replay: add "linux_replay" option and compute some nice stat (mean, standard deviation)
cmake: recreate shader header at build time
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5682 96395faa-99c1-11dd-bbfe-3dabce05a288
* don't delete the wnd in GSclose. It can still be used later
* Properly detect the GL_ARB_gpu_shader5 extension for Fxaa
* A couple of fix in Create (GSopen1) of GSWndEGL/GSWndOGL
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5674 96395faa-99c1-11dd-bbfe-3dabce05a288
* add exception in GSWndEGL and GSWndOGL
* Try to use EGL when GLX failed => you don't need any flags for the opensource driver ;)
cmake: don't install anymore the glsl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5671 96395faa-99c1-11dd-bbfe-3dabce05a288
* update linux dialog: create a custom shader box and put it Shade boost and Fxaa
* force the reloading of the inifile after any configuration update.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5666 96395faa-99c1-11dd-bbfe-3dabce05a288
* factorize sample object creation
* remember frame buffer attachment state
* Use a basic context on EGL. Allow to use Mesa 9.1 on AMD GPU.
* precompile vertex and geometry shader to avoid benchmark polution on replay
* Try harder to detect FGLRX driver on window
* various clean
Remain to fix the coordinate system for upscaling
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5651 96395faa-99c1-11dd-bbfe-3dabce05a288
* implement GSWndEGL copy/pasted from zzogl.
* remove linux debugging shader that failed to compile on window
* add additional debug message during context creation
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5520 96395faa-99c1-11dd-bbfe-3dabce05a288
* Remove bad redefinition of glActiveTexture and glBlendColor pointer
* Remove glew dependency on linux
* s/OGL_DEBUG/ENABLE_OGL_DEBUG/ and enable it on debug
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5512 96395faa-99c1-11dd-bbfe-3dabce05a288
Gregory Hainaut