This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
Also move it to MathUtils where it belongs with the rest of the
power-of-two functions. This gets rid of pollution of the current scope
of any translation unit with b<value> macros that aren't intended to be
used directly.
Also makes y_scale a dynamic parameter for EFB copies, as it doesn't
make sense to keep it as part of the uid, otherwise we're generating
redundant shaders.
Prior to this change, it's possible for m_wake_me_up_again to be used
while it's in an uninitialized state from the exposed API.
e.g.
- Using SetEnable after construction would perform an uninitialized read.
- Using PushEvent would perform an uninitialized read by way of operator |=.
internally, an uninitialized read can happen if PullEventsInternal() is
executed before other functions.
Just to avoid the whole possibility of performing uninitialized reads,
we just give the class member a default value of false.
This way, if we load a UID cache where the data was incomplete (e.g.
Dolphin crashed), we don't lose the existing UIDs which were previously
at the beginning.
This will create a merge conflict if two PRs try to increment the
cache version at the same time, which makes it noticeable that the
PR that gets merged last needs to increment the cache version again.
We already use this for savestates and the game list cache.
Minimizes repetition.
std::minmax_element can be used for the 256 * 2 case, as it's only performing byte comparisons
and thus, there will always be an element smaller than 0xffff, so it doesn't need to be included
in the set of compared values.
Skip ubershader mode works the same as hybrid ubershaders in that the
shaders are compiled asynchronously. However, instead of using the
ubershader to draw the object, it skips it entirely until the
specialized shader is made available.
This mode will likely result in broken effects where a game creates an
EFB copy, and does not redraw it every frame. Therefore, it is not a
recommended option, however, it may result in better performance on
low-end systems.
This wouldn't be much of a data reader if it can't access the
read-only data pointer in read-only contexts. Especially if it
can get a writable equivalent in contexts that aren't read-only.
It's questionable to not return a reference to the instance being
assigned to. It's also quite misleading in terms of expected behavior
relative to everything else. This fixes it to make it consistent with
other classes.
Allows the default constructor to be defaulted and ensures the default
values are associated with the member variables directly.
Also corrects a prefixed underscore in the two parameter constructor.
Given that this only contains functions from the VideoBackendBase class,
it makes more sense to move these to the relevant cpp file to keep them
all together.
This is only ever memset to zero and never used again.
This also gets rid of an instance of undefined behavior considering the
draft standard for C++17 (N4659) states at [dcl.type.cv] paragraph 5:
"
The semantics of an access through a volatile glvalue are implementation-defined.
If an attempt is made to access an object defined with a volatile-qualified type
through the use of a non-volatile glvalue, the behavior is undefined.
"
Currently, when immediately compile shaders is not enabled, the
ubershaders will be placed before any specialized shaders in the compile
queue in hybrid ubershaders mode. This means that Dolphin could
potentially use the ubershaders for a longer time than it would have if
we blocked startup until all shaders were compiled, leading to a drop in
performance.
- In D3D, shaders could be compiled on the main thread, blocking
startup.
- Reduced the latency between a pipeline being requested and used in all
backends in hybrid ubershader mode, when no shader stages were present.
- Fixed a case where async compilation could cause the same UID to be
appended multiple times to the UID cache.
- Fix incorrect number of threads being used when immediately compile
shaders was enabled.
Lowest hanging fruit I could find with a profiler.
Not sure this stuff actually needs to be done, but assuming it is, why
not do it quickly? 10x faster, goes from 1% CPU to 0.09%.
This enables shaders to be compiled while the game is starting, instead
of blocking startup. If a shader is needed before it is compiled,
emulation will block.
As these are stored in a map, operator< will become a hot function when
doing lookups, which happen every frame. std::tie generated a rather
large function here with quite a few branches.
tl;dr: This PR speedups dolphin on mobiles with the Mali GPU and ES 3.2
drivers by a factor of 10 by using the method with the biggest overhead.
Please keep care not to buy this shit!
The ARM driver team seems to care very well about their customers. But
bad luck, users and open source developers are *not* their customers. So
even device-independent feature requests are just ignored for *years*:
https://community.arm.com/graphics/f/discussions/4645/gl_ext_buffer_storage-support
The bad point, they neither implement any of the other common ways to
stream dynamic content in unextented GL:
- They just ignore the GL_MAP_UNSYNCHRONIZED_BIT flag
- They don't support on-device buffer updates and just stall with
glBufferSubData
It seems like no benchmark is using any dynamic content - and like no
customer cares about anything but benchmarks, or users...
We have a flag to disable the glBufferSubData way, this PR adds the flag
to also disable the unsychronized mapping way. The second one is
available since their ES 3.2 update, but slow as hell.
So how to continue? The last remaining technical way to stream dynamic
content at all is to alloc a new buffer per draw call with glBufferData.
This is very gross, but still a factor 10 speedup compared to stalling
the GPU. Small tests shows that you can expect another 3-5 times speedup
with EXT_buffer_data, so Mali would be on pair with Adreno here. So if
you have bought such a device unfortunately, please try to make noise on
your vendor forums/support and ask for this extension. If you are going
to buy a new mobile, I'd recormend to avoid *any* mobile with a Mali GPU
in it.
We now differentiate between a resize event and surface change/destroyed
event, reducing the overhead for resizes in the Vulkan backend. It is
also now now safe to change the surface multiple times if the video thread
is lagging behind.
The option is named DisableCopyToVRAM under the Hacks section in
GFX.ini. It is intentionally not exposed to the GUI, as users should not
need to use it under normal circumstances. The main use is debugging
issues in the EFB-to-RAM shaders.
The console appears to behave against standard IEEE754 specification
here, in particular around how NaNs are handled. NaNs appear to have no
effect on the result, and are treated the same as positive or negative
infinity, based on the sign bit.
However, when the result would be NaN (inf - inf, or (-inf) - (-inf)),
this results in a completely fogged color, or unfogged color
respectively. We handle this by returning a constant zero for the A
varaible, and positive or negative infinity for C depending on the sign
bits of the A and C registers. This ensures that no NaN value is passed
to the GPU in the first place, and that the result of the fog
calculation cannot be NaN.
Otherwise we might get UB if the value we cast is larger than the
max value of the underlying type that the compiled picked for the enum.
I haven't done any extensive check through Dolphin to find cases
of this, I'm just fixing the cases I already know of.
Tested on a linux Intel Skylake integrated graphics with
blend_func_extended force-disabled, as it's the only platform I have
that doesn't crash with ubershaders and supports fb_fetch
It seems it doesn't like modifying inout variables in place - so instead
use a temporary for ocol0/ocol1 and only write them once at the end of
the shader
GLES doesn't support C-style array initialisers, so stuff like:
Type var[2] = {
VALUE_A,
VALUE_B
};
isn't supported in GLES (it was added in
GL_ARB_shading_language_420pack).
The texture conversion shader used this, so would fail to compile on
GLES.
HLSL does not define roundEven(), only round(). This means that the
output may differ slightly for OpenGL vs Direct3D. However, it ensures
consistency across OpenGL drivers, as round() in GLSL can go either way.
This fixes the rendering of the scan visor in Metroid Prime 2: Echoes,
as seen in https://fifoci.dolphin-emu.org/dff/mp2-scanner/
The alpha channel was off-by-one on Ivy Bridge due to the rounding
after multiplication with colmat. This commit removes this matrix
altogether in most cases, making them simple GLSL swizzles.
This will generate one shader per copy format. For now, it is the same
shader with the colmat hard coded. So it should already improve the GPU
performance a bit, but a rewrite of the shader generator is suggested.
Half of the patch is done by linkmauve1:
VideoCommon: Reorganise the shader writes.
Also skips swapping the window system buffers in headless mode, as there
may not be a surface which can be swapped in the first place. Instead,
we call glFlush() at the end of a frame in this case.
Cel-damage uses the color from the lighting stage of the vertex pipeline
as texture coordinates, but sets numColorChans to zero.
We now calculate the colors in all cases, but override the color before
writing it from the vertex shader if numColorChans is set to a lower value.
Jonathan Hamilton