It's a bit confusing to get a yes/no dialogue box without any indication
of what yes or no will do in this situation, so add a short explanatory
sentence.
Some code was calling more than one of these functions in a row
(in particular, FileUtil.cpp itself did it a lot...), which is
a waste since it's possible to call stat a single time and then
read all three values from the stat struct. This commit adds a
File::FileInfo class that calls stat once on construction and
then lets Exists/IsDirectory/GetSize be executed very quickly.
The performance improvement mostly matters for functions that
can be handling a lot of files, such as File::ScanDirectoryTree.
I've also done some cleanup in code that uses these functions.
For instance, some code had checks like !Exists() || !IsDirectory(),
which is functionally equivalent to !IsDirectory(), and some
code was using File::GetSize even though there was an IOFile
object that the code could call GetSize on.
It didn't work when there were non-ASCII characters
in the directories argument, but it worked fine with
non-ASCII characters in names of found files and folders.
c5fa470 made the extension check discard directories, but
only in the new code that currently only is used on Windows.
Let's add an equivalent check in the old code so that the
behavior is consistent across platforms.
This fixes the global-static fifo object causing infinite hangs in some
cases. Notably, failure to initialize a graphics backend would result in
BlockingLoop::Prepare being called but never executing Run(), leaving the
object in a bad state.
This one verifies bitmasks where low bits are set to 1 (hence the name).
Any stray 0 among the lower ones or any stray 1 among the higher zeros
renders the mask invalid.
The edge cases of all zeros and all ones are considered valid masks.
It uses an efficient implementation. It's the counterpart of
https://graphics.stanford.edu/~seander/bithacks.html#DetermineIfPowerOf2
This allows the user to go through the Wii Menu first boot setup
screen when they launch the System Menu for the first time.
Most useful on a clean profile, after doing a full system update,
to configure settings like the console country.
This rewrites the SysConf code for several reasons:
* Modernising the SysConf class. The naming was entirely cleaned up.
constexpr for constants.
* Exposing less stuff in the header.
* Probably less efficient parsing and writing logic, but much simpler
to understand and use in my opinion. No more hardcoded offsets.
No more duplicated code for the initial SYSCONF generation.
* More flexibility. It is now possible to add and remove entries,
since we rebuild the file. This allows us to stop spamming
"section not found" panic alerts; we can now use and insert
default entries.
stat() returns an error code in errno on both POSIX compliant
platforms and Windows.
This means we should always use errno instead of GetLastErrorMsg
which uses GetLastError() (Win32) on Windows.
POSIX allows one or more trailing slashes for directories.
From POSIX.1-2008, section 3.271 (Base Definitions / Pathname):
> A pathname can optionally contain one or more trailing <slash>
> characters. Multiple successive <slash> characters are considered to
> be the same as one <slash>, except for the case of exactly two
> leading <slash> characters.
On Windows, the extra trailing slashes are ignored for directories too.
Too much boilerplate that is duplicated if we use curl directly.
Let's add a simple wrapper class that hides the implementation details
and just allows to simply make HTTP requests and get responses.
std::optional makes a few things a bit neater and less error prone.
However, we still cannot use C++17 (unfortunately), so this commit
adds an implementation of std::optional that we can use right now.
Based on https://github.com/tensorflow/tensorflow/blob/master/tensorflow/core/lib/gtl/optional.h
which seems to be fairly similar to C++17's <optional> and standards
compliant. It's one of the few implementations that handle propagating
type traits like copy constructibility, just like libc++/libstdc++.
This prevents the IOS crypto code and keys from being spread over
the codebase. Things only have to be implemented once, and can be
used everywhere from the IOS code.
Additionally, since ES exposes some IOSC calls directly (DeleteObject
and Encrypt/Decrypt), we need this for proper emulation.
Currently, this only supports AES key objects.
As the name is immediately stored into a class member, a move here is a
better choice.
This also moves the constructor implementations into the cpp file to
avoid an otherwise unnecessary inclusion in the header. This is also
likely a better choice as Section contains several non-trivial members,
so this would avoid potentially inlining a bunch of setup and teardown
code related to them as a side-benefit.
If the delimiters of a memory aren't exactly the same as an address, but their size includes the memory breakpoint delimiter, the break will not go through. This makes it so that you can specify a search for a memory breakpoint with a data size and will check if the data fits with that size on all memory breakpoints so the breaks go through.
This is slightly safer than writing contents to /title directly.
We still cannot rename everything in one go atomically, but this allows
implementing AddTitleCancel very easily.
Also, this ensures that when a title import fails, no incomplete files
will be left in the title directory, which can mess up the system menu.
Regression introduced in e99cd57 / 4935: VideoBackends: Set the maximum
range when the depth range is oversized[1]. The NV_depth_buffer_float
extension is not part of OpenGL 3.0, and requiring it causes a hard
crash when it's not supported (e.g. macOS).
[1]: https://github.com/dolphin-emu/dolphin/pull/4935
This moves all the byte swapping utilities into a header named Swap.h.
A dedicated header is much more preferable here due to the size of the
code itself. In general usage throughout the codebase, CommonFuncs.h was
generally only included for these functions anyway. These being in their
own header avoids dumping the lesser used utilities into scope. As well
as providing a localized area for more utilities related to byte
swapping in the future (should they be needed). This also makes it nicer
to identify which files depend on the byte swapping utilities in
particular.
Since this is a completely new header, moving the code uncovered a few
indirect includes, as well as making some other inclusions unnecessary.
Getting and setting configuration from the base config layer are common
and repetitive tasks. This commit adds some simpler to use functions to
make the new system easier to work with.
Config::Get and Config::Set are intended to make switching from
SConfig a bit less painful. They always operate on the main system.
Example usage:
// before
auto base_layer = Config::GetLayer(Config::LayerType::Base);
auto core = base_layer->GetOrCreateSection(Config::System::Main, "Core");
u8 language;
core->Get("Language", &language, 0);
SetData("IPL.LNG", language);
// now
auto base_layer = Config::GetLayer(Config::LayerType::Base);
auto core = base_layer->GetOrCreateSection(Config::System::Main, "Core");
SetData("IPL.LNG", core->Get<u8>("Language", 0));
// or simply
SetData("IPL.LNG", Config::Get<u8>("Core", "Language", 0));
Given a std::map can't have duplicate keys, iterating over the map
explicitly isn't necessary, and find() can just be used instead.
Also, instead of manually calling push_back() for every entry to
be added, the range constructor of std::vector can be used instead to add
the whole range all at once.
We (the Microsoft C++ team) use the dolphin project as part of our "Real world code" tests.
I noticed a few issues in windows specific code when building dolphin with the MSVC compiler
in its conformance mode (/permissive-). For more information on /permissive- see our blog
https://blogs.msdn.microsoft.com/vcblog/2016/11/16/permissive-switch/.
These changes are to address 3 different types of issues:
1) Use of qualified names in member declarations
struct A {
void A::f() { } // error C4596: illegal qualified name in member declaration
// remove redundant 'A::' to fix
};
2) Binding a non-const reference to a temporary
struct S{};
// If arg is in 'in' parameter, then it should be made const.
void func(S& arg){}
int main() {
//error C2664: 'void func(S &)': cannot convert argument 1 from 'S' to 'S &'
//note: A non-const reference may only be bound to an lvalue
func( S() );
//Work around this by creating a local, and using it to call the function
S s;
func( s );
}
3) Add missing #include <intrin.h>
Because of the workaround you are using in the code you will need to include
this. This is because of changes in the libraries and not /permissive-
The built-in `configure_file` command correctly handles the case where
none of the variables change and scmrev.h doesn't need to be rebuilt.
This saves a full re-link of Dolphin any time CMake is re-run.
This reimplements the USB HID v4 IOS device using the new common
USB code (to reuse more code and allow emulated HIDs to be added
more easily in the future).
The main difference is that HIDs now have to be whitelisted, like
every other USB device for OH0 and VEN.
libusb on Windows is limited to only a single context. Trying to open
more than one can cause device enumerations to fail randomly.
libusb is thread-safe and we don't use the manual polling support (with
`poll()`) so this should be safe.
Leo Lam