Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-3-marcandre.lureau@redhat.com>
This commit adds a re-implementation of hw/char/pl011.c in Rust.
How to build:
1. Configure a QEMU build with:
--enable-system --target-list=aarch64-softmmu --enable-rust
2. Launching a VM with qemu-system-aarch64 should use the Rust version
of the pl011 device
Co-authored-by: Junjie Mao <junjie.mao@intel.com>
Co-authored-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Link: https://lore.kernel.org/r/6ec1d4fb8db2a1d7ba94c73e65d9770371b7857d.1727961605.git.manos.pitsidianakis@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The S390X architecture uses big endianness. Directly use
the big-endian LD/ST API.
Mechanical change using:
$ end=be; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/s390x/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241004163042.85922-23-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The M68K architecture uses big endianness. Directly use
the big-endian LD/ST API.
Mechanical change using:
$ end=be; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/m68k/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241004163042.85922-18-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
Enable PCI support for the ARM Xen PVH machine.
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Expose handle_bufioreq in xen_register_ioreq().
This is to allow machines to enable or disable buffered ioreqs.
No functional change since all callers still set it to
HVM_IOREQSRV_BUFIOREQ_ATOMIC.
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
It has been deprecated since 8.1; remove it and suggest using the 'local' file
system backend driver instead or virtiofsd.
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The includes where updated based on compile errors. Now, the inclusion of the
header roughly matches Kconfig dependencies:
# grep -r -e "select SERIAL_ISA"
hw/ppc/Kconfig: select SERIAL_ISA
hw/isa/Kconfig: select SERIAL_ISA
hw/sparc64/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init()
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing in fw_cfg.c requires target-specific knowledge,
build it once for the 4 MIPS variants.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
rocker_fp_ports hasn't been used since it was added back in 2015.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pcie_chassis_find_slot has been unused since it was added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
remote_iohub_finalize has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_load_inflight and vhost_dev_save_inflight have been
unused since they were added in 2019 by:
5ad204bf2a ("vhost-user: Support transferring inflight buffer between qemu and backend")
Remove them, and their helper vhost_dev_resize_inflight.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
fw_cfg_init_io has been unused since
918a7f706b ("i386: load kernel on xen using DMA")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
serial_set_frequnecy has been unused since it was added in 2009:
038eaf82c8 ("serial: Add interface to set reference oscillator frequency")
It looks like the 'baudbase' is now a property anyway so the wrapper
isn't needed.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
net_rx_pkt_get_l3_hdr_offset and net_rx_pkt_get_iovec_len haven't
been used since they were added.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: also removed net_rx_pkt_get_l3_hdr_offset prototype from hw/net/net_rx_pkt.h as suggested by Akihiko Odaki)
mch_mcfg_base has been unused since it was added by
6f1426ab0f ("ich9: APIs for pc guest info")
back in 2013.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We were including the "exec/tswap.h" header to get
target_words_bigendian() declaration, but since commit a276ec8e26
("hw/audio/virtio-snd: Always use little endian audio format")
removed this method call, we don't need this header anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
-----BEGIN PGP SIGNATURE-----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=15Hm
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost_svq_get_buf() may return a VirtQueueElement that should be freed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
../hw/virtio/vhost-shadow-virtqueue.c:545:13: error: ‘r’ may be used uninitialized [-Werror=maybe-uninitialized]
Set `r` to 0 at every loop, since we don't check vhost_svq_get_buf()
return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
../hw/block/virtio-blk.c:1212:12: error: ‘rq’ may be used uninitialized [-Werror=maybe-uninitialized]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
../hw/sd/sdhci.c:846:16: error: ‘res’ may be used uninitialized [-Werror=maybe-uninitialized]
False-positive, because "length" is non-null.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
../hw/scsi/vhost-scsi.c:173:12: error: ‘ret’ may be used uninitialized [-Werror=maybe-uninitialized]
It can be reached when num_queues=0. It probably doesn't make much sense
to instantiate a vhost-scsi with 0 IO queues though. For now, make
vhost_scsi_set_workers() return success/0 anyway, when no workers have
been setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
../hw/display/qxl.c:1352:5: error: ‘pci_region’ may be used uninitialized [-Werror=maybe-uninitialized]
../hw/display/qxl.c:1365:22: error: ‘pci_start’ may be used uninitialized [-Werror=maybe-uninitialized]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
The IMSIC state variable eistate[] is modified by CSR instructions
within a range dedicated to the local CPU and by MMIO writes from any CPU.
Access to eistate from MMIO accessors is protected by the BQL, but
read-modify-write (RMW) sequences from CSRRW do not acquire the BQL,
making the RMW sequence vulnerable to a race condition with MMIO access
from a remote CPU.
This race can manifest as missing IPI or MSI in multi-CPU systems, eg:
[ 43.008092] watchdog: BUG: soft lockup - CPU#2 stuck for 27s! [kworker/u19:1:52]
[ 43.011723] CPU: 2 UID: 0 PID: 52 Comm: kworker/u19:1 Not tainted 6.11.0-rc6
[ 43.013070] Workqueue: events_unbound deferred_probe_work_func
[ 43.018776] [<ffffffff800b4a86>] smp_call_function_many_cond+0x190/0x5c2
[ 43.019205] [<ffffffff800b4f28>] on_each_cpu_cond_mask+0x20/0x32
[ 43.019447] [<ffffffff8001069a>] __flush_tlb_range+0xf2/0x190
[ 43.019683] [<ffffffff80010914>] flush_tlb_kernel_range+0x20/0x28
The interrupt line raise/lower sequence was changed to prevent a race
between the evaluation of the eistate and the execution of the qemu_irq
raise/lower, ensuring that the interrupt line is not incorrectly
deactivated based on a stale topei check result. To avoid holding BQL
all modifications of eistate are converted to atomic operations.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a7604e4d61068ca4d384ae2a1377e1521d4d0235.1725651699.git.tjeznach@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The omap_dma4 device was only used in the OMAP2 SoC, which has
been removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-53-peter.maydell@linaro.org
The omap_l4 device is OMAP2 only, so we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-51-peter.maydell@linaro.org
The omap_tap device is OMAP2 only, and we are removing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-49-peter.maydell@linaro.org
Remove the omap_synctimer device, which is only in the OMAP2 SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-46-peter.maydell@linaro.org
The omap_gptimer device is only in the OMAP2 SoC, which we
are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-45-peter.maydell@linaro.org
The omap_gpmc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-44-peter.maydell@linaro.org
The omap_sdrc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-43-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_mmc.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-42-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
We've removed the OMAP2 SoC, so we can remove the OMAP2 GPIO
device. (The source file remains, as it also has the model of
the OMAP1 GPIO device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-39-peter.maydell@linaro.org
The users of the OMAP2 SoC emulation have been removed, so we can
delete omap2.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-38-peter.maydell@linaro.org
Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org
The tusb6010 was only used by the n800/n810 machines, so it
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-34-peter.maydell@linaro.org
The OneNAND devices were only used by n800/n810, so they
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-33-peter.maydell@linaro.org
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
Remove the TWL92230 RTC device, which was used only by the n800 and n810.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-31-peter.maydell@linaro.org
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
Remove the tsc2005 touchscreen controller, which was only used
by the n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-29-peter.maydell@linaro.org
Remove the blizzard display device, which was only used with the
n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-28-peter.maydell@linaro.org
The devices in hw/misc/cbus.c were used only by the
now-removed nseries machine types, so they can be removed.
As this is the last use of the CONFIG_NSERIES define we
can remove that from KConfig now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-27-peter.maydell@linaro.org
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
The pxa27x-timer can be removed now we have removed the PXA2xx
SoC models. The pxa25x-timer device must remain as it is still
used by strongarm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-24-peter.maydell@linaro.org
Remove the pxa2xx-specific interrupt controller device.
As this is the last user of the pxa.h header file and the
CONFIG_PXA2XX define we can remove those too.
This completes the removal of the pxa2xx specific code. We leave:
* pxa2xx_timer -- still used by the Collie board (strongarm)
* the definitions of the CPUs themselves in target/arm
(still usable by linux-user mode)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-23-peter.maydell@linaro.org
Remove the pxa2xx-specific GPIO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-22-peter.maydell@linaro.org
Remove the pxa2xx specific pcmcia device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-21-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_dma device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-20-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_keypad device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-18-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-17-peter.maydell@linaro.org
All the callers of pxa270_init() and pxa255_init() have now been removed,
so we can remove pxa2xx.c. This also removes the only uses of a lot of
pxa2xx specific devices, which will be removed in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-16-peter.maydell@linaro.org
pxa2xx_timer includes pxa.h, but it doesn't actually make
use of any of the #defines, function prototypes or structs
defined there. Remove the unnecessary include (we will
shortly be removing the whole header file).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-15-peter.maydell@linaro.org
Currently the STRONGARM KConfig symbol pulls in PXA2XX. Since we've now
removed all the true uses of PXA2XX, we'd like to remove the PXA2XX
symbol too. To permit that, make STRONGARM directly select the things
it truly depends on:
* pxa25x-timer
* SSI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-14-peter.maydell@linaro.org
The 'z2' machine was deprecated in 9.0, so we can remove it for
9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-13-peter.maydell@linaro.org
The MAINSTONE_FPGA device was used only by the 'mainstone' machine
type, so we can remove it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-12-peter.maydell@linaro.org
The 'mainstone' machine has been deprecated since 9.0, and
so we can remove it for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-11-peter.maydell@linaro.org
The connex and verdex machines have been deprecated since
9.0 and so can be removed for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-10-peter.maydell@linaro.org
The 'cheetah' machine has been deprecated since 9.0, so we can
remove it for the 9.2 release.
(tsc210x.c is also used by nseries, so move its MAINTAINER file
line there; the nseries boards are also about to be removed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-9-peter.maydell@linaro.org
The ZAURUS KConfig symbol used to do multiple things:
* pull in the tc6393xb display device
* pull in the Zaurus SCOOP GPIO device
* pull in hw/block/nand.c code
* pull in hw/block/ecc.c code
and was used by multiple machine types in the Zaurus family.
Now that we've removed all the Zaurus machine types except
"collie" (which is not currently deprecated), we can simplify
this. "collie" doesn't need any of the above things except
for the SCOOP GPIO device.
Remove the does-lots-of-things ZAURUS KConfig symbol and instead have
collie pull in ZAURUS_SCOOP, a new KConfig symbol which exists only
to control the presence of the SCOOP GPIO device. Move the
associated source file lines in MAINTAINERS into the Collie
subsection, since this is now its only user.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-8-peter.maydell@linaro.org
The tc6393xb was used only by the XScale-based Zaurus machine types.
Now they have been removed we can remove this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-7-peter.maydell@linaro.org
The ADS7846 touchscreen controller device was used only by
the XScale-based PDA machine types. Now that they have been
removed, this device is not used in the tree and can be
deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-3-peter.maydell@linaro.org
The Sharp XScale-based PDA board models akita, borzoi, spitz,
terrier, and tosa were all deprecated in 9.0, so our deprecation
cycle permits removing them for the 9.2 release.
Remove the source files for the board models themselves, and their
documentation. There were no tests for these boards.
We will move the text describing the dropped boards from
deprecated.rst to removed-features.rst when we've cleaned up all the
boards it lists. Device models used only by removed board models
will be removed in separate commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-2-peter.maydell@linaro.org
The enable bits in the EXT_CSD_PART_CONFIG ext_csd register do *not*
specify whether the boot partitions exist, but whether they are enabled
for booting. Existence of the boot partitions is specified by a
EXT_CSD_BOOT_MULT != 0.
Currently, in the case of boot-partition-size=1M and boot-config=0,
Linux detects boot partitions of 1M. But as sd_bootpart_offset always
returns 0, all reads/writes are mapped to the same offset in the backing
file.
Fix this bug by calculating the offset independent of which partition is
enabled for booting.
This bug is unlikely to affect many users with QEMU's current set of
boards, because only aspeed sets boot-partition-size, and it also
sets boot-config to 8. So to run into this a user would have to
manually mark the boot partition non-booting from within the guest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Message-id: 20240906164834.130257-1-jlu@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added note to commit message about effects of bug]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At e72a7f65c1 (hw: Move declaration of IRQState to header and add init
function, 2024-06-29), we've changed qemu_allocate_irq() to use a
combination of g_new() + object_initialize() instead of
IRQ(object_new()). The latter sets obj->free, so that that the memory is
properly cleaned when the object is finalized, but the former doesn't.
Fixes: e72a7f65c1 (hw: Move declaration of IRQState to header and add init function)
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-id: 1723deb603afec3fa69a75970cef9aac62d57d62.1726674185.git.quic_mathbern@quicinc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure that the FIFO is checked for emptiness before popping data
from it. Previously, the code directly popped the data from the FIFO
without checking, which could cause an assertion failure:
../util/fifo8.c:67: fifo8_pop: Assertion `fifo->num > 0' failed.
Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com>
Message-id: 20240924112035.1320865-1-Shivasagar.Myana@amd.com
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the SFDP table for the Micron Xccela mt35xu01g flash.
Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240829120117.616861-1-Shivasagar.Myana@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cadence GEM peripherals as configured for Zynq MPSoC and Versal
platforms have two priority queues with separate interrupt sources for
each. If the interrupt source for the second priority queue is not
connected, they work in polling mode only. This change connects the
second interrupt source for platforms where it is available. This patch
has been tested using the lwIP stack with a Xilinx-supplied driver from
their embeddedsw repository.
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds support for the controller atomic parameters: AWUN and AWUPF. Atomic
Compare and Write Unit (ACWU) is not currently supported.
Writes that adhere to the ACWU and AWUPF parameters are guaranteed to be atomic.
New NVMe QEMU Parameters (See NVMe Specification for details):
atomic.dn (default off) - Set the value of Disable Normal.
atomic.awun=UINT16 (default: 0)
atomic.awupf=UINT16 (default: 0)
By default (Disable Normal set to zero), the maximum atomic write size is
set to the AWUN value. If Disable Normal is set, the maximum atomic write
size is set to AWUPF.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add a boolean prop (ctratt.mem) for setting CTRATT.MEM and default it to
unset (false) to keep existing behavior of the device intact.
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Arun Kumar <arun.kka@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Clear masked events from the aer queue when get log page is issued with
RAE 0 without checking for the presence of outstanding aer requests.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
[k.jensen: remove unnecessary QTAILQ_EMPTY check]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The controller already supports this decoding, so just set the
ID_CTRL.SGLS field accordingly.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-30-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-29-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-28-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-27-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-21-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-20-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-19-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-18-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-13-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-12-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-11-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-10-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-9-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-4-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-3-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-2-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before, the virtio-mem device would unplug all the memory with any reset
of the device, including during the wake-up of the guest from a
suspended state. Due to this, the virtio-mem driver in the Linux kernel
disallowed suspend-to-ram requests in the guest when the
VIRTIO_MEM_F_PERSISTENT_SUSPEND feature is not exposed by QEMU.
This patch adds the code to skip the reset on wake-up and exposes
theVIRTIO_MEM_F_PERSISTENT_SUSPEND feature to the guest kernel driver
when suspending is possible in QEMU (currently only x86).
Message-ID: <20240904103722.946194-5-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.
This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().
Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Virtio memory devices rely on PCI BARs to expose the contents of memory.
Because of this they cannot be used (yet) with virtio-mmio or virtio-ccw.
In fact the code that is common to virtio-mem and virtio-pmem, which
is in hw/virtio/virtio-md-pci.c, is only included if CONFIG_VIRTIO_PCI
is set. Reproduce the same condition in the Kconfig file, only allowing
VIRTIO_MEM and VIRTIO_PMEM to be defined if the transport supports it.
Without this patch it is possible to create a configuration with
CONFIG_VIRTIO_PCI=n and CONFIG_VIRTIO_MEM=y, but that causes a
linking failure.
Message-ID: <20240906101658.514470-1-pbonzini@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].
[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'GPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'GPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/GPL-2.0+.html
[2] https://spdx.org/licenses/GPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0+/GPL-2.0-or-later/ \
$(git grep -lP 'SPDX-License-Identifier: \W+GPL-2.0\+[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the "2 | 3+" expression can be simplified as "2+",
it is pointless to mention the GPLv3 license.
Add the corresponding SPDX identifier to remove all doubt.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The last use of sysbus_mmio_unmap was removed by
981b1c6266 ("spapr/xive: rework the mapping the KVM memory regions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DM163 is an emulated 8x8 LED matrix. This commit flips the image
horizontally so it's rendered the same way as on the hardware.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The System Control and Management Interface is specific to arm
machines, so don't include this device in non-arm targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The description about virt machine type is removed by mistake, add
new description here. Here is output result with command
"./qemu-system-loongarch64 -M help"
Supported machines are:
none empty machine
virt QEMU LoongArch Virtual Machine (default)
x-remote Experimental remote machine
Without the patch, it shows as follows:
Supported machines are:
none empty machine
virt (null) (default)
x-remote Experimental remote machine
Fixes: ef2f11454c(hw/loongarch/virt: Replace Loongson IPI with LoongArch IPI)
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()") contained a typo
in the NIC alias which caused initialisation of the in-built dp83932 NIC to fail
when using the normal -nic user,model=dp83932 command line.
Fixes: e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
PowerMac is spelled as PowerMAC (Media Access Control) in some places.
This is misleading.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2297
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
in many cases, <zlib.h> is only included for crc32 function,
and in some of them, there's a comment saying that, but in
a different way. In one place (hw/net/rtl8139.c), there was
another #include added between the comment and <zlib.h> include.
Make all such comments to be on the same line as #include, make
it consistent, and also add a few missing comments, including
hw/nvram/mac_nvram.c which uses adler32 instead.
There's no code changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SW modifying USART_CR1 TE bit should cuase HW to respond by altering
USART_ISR TEACK bit, and likewise for RE and REACK bit.
This resolves some but not all issues necessary for the official STM USART
HAL driver to function as is.
Fixes: 87b77e6e01 ("hw/char/stm32l4x5_usart: Enable serial read and write")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2540
Signed-off-by: Jacob Abrams <satur9nine@gmail.com>
Message-id: 20240911043255.51966-1-satur9nine@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These were passing a NULL buffer pointer unconditionally, which happens
to behave in a mostly benign way (except for the chance of an excess
memory region unref and a bounce buffer leak). Per the function comment,
this was never meant to be accepted though, and triggers an assertion
with the "softmmu: Support concurrent bounce buffers" change.
Given that the code in question never sets up any mappings, just remove
the unnecessary dma_memory_unmap calls along with the DBDMA_io struct
fields that are now entirely unused.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240916175708.1829059-1-mnissler@rivosinc.com>
Fixes: be1e343995 ("macio: switch over to new byte-aligned DMA helpers")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
An integer overflow fix for the last zone on a zoned block device whose
capacity is not a multiple of the zone size.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmbpa0sACgkQnKSrs4Gr
c8hdAwgAgp6AJVXHiPo43GbhdSsKJ2bq8DIPrsqgwAxD3rgxxRVwsWzENQgzF8O9
qoXPmU0eqPp0zTsKTxNrlIgCpsJ3X4Oeg89u4N1xUOAJtADZGlbucUQEkAgIhWMl
IFLjtFc7EbhWn57FmQGzANeOJOB+OumfQGeC7wbeAtUCn7g08rXtq+5I5GRKqkkP
u1FlSassd7fyVnlVc+BT2aKANBITKhJGhYqwndvxXzMIi0L54/bQRrarLoy7oJuG
1k8zYLi6giUINNwYMtzn5ooXNnOSoxHKKfwcFT8hGZixwBBnCnYHjNkfs/QyvZQ7
ZuR9mY6pqp/lg5127UlpOR7d6HADLQ==
=709Z
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
An integer overflow fix for the last zone on a zoned block device whose
capacity is not a multiple of the zone size.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmbpa0sACgkQnKSrs4Gr
# c8hdAwgAgp6AJVXHiPo43GbhdSsKJ2bq8DIPrsqgwAxD3rgxxRVwsWzENQgzF8O9
# qoXPmU0eqPp0zTsKTxNrlIgCpsJ3X4Oeg89u4N1xUOAJtADZGlbucUQEkAgIhWMl
# IFLjtFc7EbhWn57FmQGzANeOJOB+OumfQGeC7wbeAtUCn7g08rXtq+5I5GRKqkkP
# u1FlSassd7fyVnlVc+BT2aKANBITKhJGhYqwndvxXzMIi0L54/bQRrarLoy7oJuG
# 1k8zYLi6giUINNwYMtzn5ooXNnOSoxHKKfwcFT8hGZixwBBnCnYHjNkfs/QyvZQ7
# ZuR9mY6pqp/lg5127UlpOR7d6HADLQ==
# =709Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 12:43:07 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
hw/block: fix uint32 overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support for IGDs of gen 11 and later
* Coverity fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmbpWl0ACgkQUaNDx8/7
7KFYJhAAu8Dyf96RUr4ucu/VaSlTi/rk/i5sivD4EXiCOf2qpQtyoo+C8DJmjAZg
nC+4IpD2vu2C/xaZoQ4o6uQL7c45dOup59jcbKO+6NekF521Y6aq9OvE5v55CAwu
R38UWI6ZX5qqyU/tA39/s7migIvCtK7VgTzEs2Lpzw8WetCFattvrEiKHt09fNdX
kSPdFVV6FymOowAekQtI2JACr8C5nm8x9npzyL1SjauvWA70aOU9h1iHoIxHGKFF
jlotd6v16c0Z260AUP/RDBwf8wqg2MtwBOI3qVGYD20Xd7tRQkLlFp8X5lNw4pHr
eylqqxW3E4LJ4vSWpi4Jj2tZN5tZl8X927ew79D2gf69R8f1l+5CG/qqynMRbZ0b
gE1E5UNfEkXYX9PMuf2uenoiahMxh7ZHwzJmtFcTLGyHGudSaUu3S7Yu5a1R0ZDf
8OyzE1E1X/8uCABvSgPphtSfYD9kXKiwNJSPrj3PZ1nXgNoA6BDi5sOeTPm0POBA
IfB10VEXDd61KPFKGQqZ1Qqrvb0LsCTvFTwCHRHBEB/F/ykwTX9dzrTInkTBTiQU
OyDjKZvR2ACjysuFxvpA2fhhF7KCmCwg7M/YsKyVLKq2r3TdBnDS1DHm7Z5ebNu4
vgV4fsPCnjaQxOHEHZmh+rxG0E2dOGMiCieY9ooJ6jeomKQ+d60=
=cIWS
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240917' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for IGDs of gen 11 and later
* Coverity fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmbpWl0ACgkQUaNDx8/7
# 7KFYJhAAu8Dyf96RUr4ucu/VaSlTi/rk/i5sivD4EXiCOf2qpQtyoo+C8DJmjAZg
# nC+4IpD2vu2C/xaZoQ4o6uQL7c45dOup59jcbKO+6NekF521Y6aq9OvE5v55CAwu
# R38UWI6ZX5qqyU/tA39/s7migIvCtK7VgTzEs2Lpzw8WetCFattvrEiKHt09fNdX
# kSPdFVV6FymOowAekQtI2JACr8C5nm8x9npzyL1SjauvWA70aOU9h1iHoIxHGKFF
# jlotd6v16c0Z260AUP/RDBwf8wqg2MtwBOI3qVGYD20Xd7tRQkLlFp8X5lNw4pHr
# eylqqxW3E4LJ4vSWpi4Jj2tZN5tZl8X927ew79D2gf69R8f1l+5CG/qqynMRbZ0b
# gE1E5UNfEkXYX9PMuf2uenoiahMxh7ZHwzJmtFcTLGyHGudSaUu3S7Yu5a1R0ZDf
# 8OyzE1E1X/8uCABvSgPphtSfYD9kXKiwNJSPrj3PZ1nXgNoA6BDi5sOeTPm0POBA
# IfB10VEXDd61KPFKGQqZ1Qqrvb0LsCTvFTwCHRHBEB/F/ykwTX9dzrTInkTBTiQU
# OyDjKZvR2ACjysuFxvpA2fhhF7KCmCwg7M/YsKyVLKq2r3TdBnDS1DHm7Z5ebNu4
# vgV4fsPCnjaQxOHEHZmh+rxG0E2dOGMiCieY9ooJ6jeomKQ+d60=
# =cIWS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 11:30:53 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240917' of https://github.com/legoater/qemu:
vfio/igd: correctly calculate stolen memory size for gen 9 and later
vfio/igd: don't set stolen memory size to zero
vfio/igd: add ID's for ElkhartLake and TigerLake
vfio/igd: add new bar0 quirk to emulate BDSM mirror
vfio/igd: use new BDSM register location and size for gen 11 and later
vfio/igd: support legacy mode for all known generations
vfio/igd: return an invalid generation for unknown devices
hw/vfio/pci.c: Use correct type in trace_vfio_msix_early_setup()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The product bs->bl.zone_size * (bs->bl.nr_zones - 1) may overflow
uint32.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-id: 20240917080356.270576-2-frolov@swemel.ru
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have to update the calculation of the stolen memory size because
we've seen devices using values of 0xf0 and above for the graphics mode
select field. The new calculation was taken from the linux kernel [1].
[1] 7c626ce4ba/arch/x86/kernel/early-quirks.c (L455-L460)
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The stolen memory is required for the GOP (EFI) driver and the Windows
driver. While the GOP driver seems to work with any stolen memory size,
the Windows driver will crash if the size doesn't match the size
allocated by the host BIOS. For that reason, it doesn't make sense to
overwrite the stolen memory size. It's true that this wastes some VM
memory. In the worst case, the stolen memory can take up more than a GB.
However, that's uncommon. Additionally, it's likely that a bunch of RAM
is assigned to VMs making use of GPU passthrough.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
ElkhartLake and TigerLake devices were tested in legacy mode with Linux
and Windows VMs. Both are working properly. It's likely that other Intel
GPUs of gen 11 and 12 like IceLake device are working too. However,
we're only adding known good devices for now.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The BDSM register is mirrored into MMIO space at least for gen 11 and
later devices. Unfortunately, the Windows driver reads the register
value from MMIO space instead of PCI config space for those devices [1].
Therefore, we either have to keep a 1:1 mapping for the host and guest
address or we have to emulate the MMIO register too. Using the igd in
legacy mode is already hard due to it's many constraints. Keeping a 1:1
mapping may not work in all cases and makes it even harder to use. An
MMIO emulation has to trap the whole MMIO page. This makes accesses to
this page slower compared to using second level address translation.
Nevertheless, it doesn't have any constraints and I haven't noticed any
performance degradation yet making it a better solution.
[1] 5c351bee0f/devicemodel/hw/pci/passthrough.c (L650-L653)
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Intel changed the location and size of the BDSM register for gen 11
devices and later. We have to adjust our emulation for these devices to
properly support them.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
We're soon going to add support for legacy mode to ElkhartLake and
TigerLake devices. Those are gen 11 and 12 devices. At the moment, all
devices identified by our igd_gen function do support legacy mode. This
won't change when adding our new devices of gen 11 and 12. Therefore, it
makes more sense to accept legacy mode for all known devices instead of
maintaining a long list of known good generations. If we add a new
generation to igd_gen which doesn't support legacy mode for some reason,
it'll be easy to advance the check to reject legacy mode for this
specific generation.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Intel changes it's specification quite often e.g. the location and size
of the BDSM register has change for gen 11 devices and later. This
causes our emulation to fail on those devices. So, it's impossible for
us to use a suitable default value for unknown devices. Instead of
returning a random generation value and hoping that everthing works
fine, we should verify that different devices are working and add them
to our list of known devices.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The tracepoint trace_vfio_msix_early_setup() uses "int" for the type
of the table_bar argument, but we use this to print a uint32_t.
Coverity warns that this means that we could end up treating it as a
negative number.
We only use this in printing the value in the tracepoint, so
mishandling it as a negative number would be harmless, but it's
better to use the right type in the tracepoint. Use uint64_t to
match how we print the table_offset in the vfio_msix_relo()
tracepoint.
Resolves: Coverity CID 1547690
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED SDK add lm75 in i2c bus 0 for AST2700.
LM75 is compatible with TMP105 driver.
Introduce a new i2c init function and
add tmp105 device model in i2c bus 0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Add I2C model for AST2700 I2C support.
The I2C controller registers base address is start at
0x14C0_F000 and its address space is 0x2000.
The AST2700 I2C controller has one source INTC per bus.
I2C buses interrupt are connected to GICINT130_INTC
from bit 0 to bit 15.
I2C bus 0 is connected to GICINT130_INTC at bit 0.
I2C bus 15 is connected to GICINT130_INTC at bit 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Currently, users can set the INTC mapping table with
enumerated device id and device irq to get the INTC orgate
input pins. However, some devices use the continuous source numbers in the
same INTC orgate. To reduce the enumerated device id definition,
create a new API to get the INTC orgate input pin
if users only provide the device id with its bus number index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".
The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.
Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.
It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.
Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.
Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.
The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.
Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.
An I2C controller registers owns 8KB address space.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.
To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.
Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.
The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.
Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer
Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.
To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.
Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.
Incrementing the version of aspeed_i2c_bus_vmstate to 6.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.
Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15
Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In aspeed_gpio_update() we calculate "mask = 1 << gpio", where
gpio can be between 0 and 31. Coverity complains about this
because 1 << 31 won't fit in a signed integer.
For QEMU this isn't an error because we enable -fwrapv,
but we can keep Coverity happy by doing the shift on
unsigned numbers.
Resolves: Coverity CID 1547742
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
g_assert_not_reached();
break;
| ^^^^^
Solve that by removing the unreachable 'break' statement, unifying
the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-31-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
g_assert_not_reached();
break;
| ^^^^^
Solve that by removing the unreachable 'break' statement, unifying
the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-29-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
g_assert_not_reached();
break;
| ^^^^^
Solve that by removing the unreachable 'break' statement, unifying
the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-28-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-ID: <20240910221606.1817478-8-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-6-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-5-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the ADB mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240907173700.348818-1-mark.cave-ayland@ilande.co.uk>
[PMD: Add comment about .sync handler]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the Sun mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Note that this conversion adds extra sunmouse_* members to ESCCChannelState
but they are not added to the migration stream (similar to the Sun keyboard
members). If this were desired in future, the Sun devices should be split
into separate devices and added to the migration stream there instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2518
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Carl Hauser <chauser@pullman.com>
Message-ID: <20240904102301.175706-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per datasheet, "HIGH AND LOW LIMIT REGISTERS", the lower 4 bit
of the limit registers are unused and always report 0.
The lower 4 bit should not be used for temperature comparisons,
so mask the unused bits before storing the limits.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-6-philmd@linaro.org>
[PMD: Update tests/qtest/ files]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per datasheet, "ONE-SHOT (OS)", the OS bit always returns 0 when reading
the configuration register.
Clear the ONE_SHOT bit in the WRITE path. Now than the READ path is
simpler, we can also simplify tmp105_alarm_update().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-5-philmd@linaro.org>
The next commit will clear the ONE_SHOT bit in the WRITE
path (to keep the READ path trivial). As a preliminary step,
pass the 'oneshot' value as argument to tmp105_alarm_update().
No logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20240906154911.86803-4-philmd@linaro.org>
To improve readability, use the registerfields API.
Define the register bits with FIELD(), and use the
FIELD_EX8() and FIELD_DP8() macros. Remove the
abbreviations in comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20240906154911.86803-3-philmd@linaro.org>
Coding style asks for no space between variable and "++". The next patch
in this series will change one of those assignments. Instead of changing
just one with that patch, change all of them for consistency.
While at it, also fix other coding style problems reported by checkpatch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-2-philmd@linaro.org>
In preparation of having a TX FIFO, rename the RX FIFO methods.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-12-philmd@linaro.org>
We shouldn't transmit characters when the full UART or its
transmitter is disabled. However we don't want to break the
possibly incomplete "my first bare metal assembly program"s,
so we choose to simply display a warning when this occurs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-9-philmd@linaro.org>
To keep MemoryRegionOps read/write handlers with similar logic,
factor pl011_read_txdata() out of pl011_read(), similar to what
the previous commit did to pl011_write().
No functional change intended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240719181041.49545-8-philmd@linaro.org>
When implementing FIFO, this code will become more complex.
Start by factoring it out to a new pl011_write_txdata() function.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240719181041.49545-7-philmd@linaro.org>
To be able to reset the RX or TX FIFO separately,
split pl011_reset_fifo() in two.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-6-philmd@linaro.org>
We'll soon use pl011_loopback_enabled() and pl011_loopback_tx()
from functions defined before their declarations. In order to
avoid forward-declaring them, move them around.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-5-philmd@linaro.org>
Avoid forward-declaring pl011_put_fifo() by moving it earlier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-4-philmd@linaro.org>
Since its introduction in commit cdbdb648b7 ("ARM Versatile
Platform Baseboard emulation.") PL011State::readbuff as never
been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-3-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-12-philmd@linaro.org>
We just removed the single machine calling etraxfs_dmac_init()
(the axis-dev88 machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-11-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-10-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-9-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-8-philmd@linaro.org>
No more CRIS machine uses cris_load_image(), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-7-philmd@linaro.org>
This machine was deprecated for the v9.0 release in commit
c7bbef4023 ("docs: mark CRIS support as deprecated").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-6-philmd@linaro.org>
sh7750_register_io_device() was only used by the TC58128
NAND EEPROM which has been removed in the previous commit.
Remove it as unused code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-4-philmd@linaro.org>
The TC58128 NAND EEPROM is not user creatable and
needs to be instanciated in the code via tc58128_init().
Only the SHIX machine was using it, and it was removed
in the previous commit. Since the TC58128 has no more
users, remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240903153959.18392-3-philmd@linaro.org>
The SHIX machine is deprecated since v9.0 (commit
322b038c94 "target/sh4: Deprecate the shix machine").
Time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-19-philmd@linaro.org>
designware_pcie_root_realize() uses get_system_memory()
as the "host side memory region", as opposed to the "PCI
side" one. Introduce the 'host_mem' variable for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-4-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Remove a pointless structure declaration in "designware.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-2-philmd@linaro.org>
On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e4 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org
Fixes: 8d999995e4 ("arm_gic: Fix GIC pending behavior")
Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The read index should not be changed when storing a new message into the
RX or TX FIFO. Changing it at this point will cause the reader to get
out of sync. The wrapping of the read index is already handled by the
pre-write functions for the FIFO status registers anyway.
Additionally, the calculation for wrapping the store index was off by
one, which caused new messages to be written to the wrong location in
the FIFO. This caused incorrect messages to be delivered.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-8-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use QEMU's helper functions can_dlc2len() and can_len2dlc() for
translating between the raw DLC value and the SocketCAN length value.
This also has the side effect of correctly handling received CAN FD
frames with a DLC of 0-8, which was broken previously.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-7-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The endianness of the CAN data was backwards in each group of 4 bytes.
For example, the following data:
00 11 22 33 44 55 66 77
was showing up like this:
33 22 11 00 77 66 55 44
Fix both the TX and RX code to put the data in the correct order.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-6-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for QEMU_CAN_FRMF_ESI and QEMU_CAN_FRMF_BRS flags, and
ensure frame->flags is always initialized to 0.
Note that the Xilinx IP core doesn't allow manually setting the ESI bit
during transmits, so it's only implemented for the receive case.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-5-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously the emulated CAN ID register was being set to the exact same
value stored in qemu_can_frame.can_id. This doesn't work correctly
because the Xilinx IP core uses a different bit arrangement than
qemu_can_frame for all of its ID registers. Correct this problem for
both RX and TX, including RX filtering.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-4-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When checking the QEMU_CAN_FRMF_TYPE_FD flag, we need to ignore other
potentially set flags. Before this change, received CAN FD frames from
SocketCAN weren't being recognized as CAN FD.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-3-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interrupt level should be 0 or 1. The existing code was using the
interrupt flags to determine the level. In the only machine currently
supported (xlnx-versal-virt), the GICv3 was masking off all bits except
bit 0 when applying it, resulting in the IRQ never being delivered.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-2-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch's main focus is to use the previously added
hvf_get_physical_address_range to inform VM creation
about the IPA size we need for the VM, so we can extend
the default 36b IPA size and support VMs with 64+GB of
RAM. This is done by freezing the memory map, computing
the highest GPA and then (depending on if the platform
supports an IPA size that large) telling the kernel to
use a size >= for the VM. In pursuit of this a couple of
things related to how we handle the physical address range
we expose to guests were altered, but for an explanation of
what we were doing:
Today, to get the IPA size we were reading id_aa64mmfr0_el1's
PARange field from a newly made vcpu. Unfortunately, HVF just
returns the hosts PARange directly for the initial value and
not the IPA size that will actually back the VM, so we believe
we have much more address space than we actually do today it seems.
Starting in macOS 13.0 some APIs were introduced to be able to
query the maximum IPA size the kernel supports, and to set the IPA
size for a given VM. However, this still has a couple of issues
on < macOS 15. Up until macOS 15 (and if the hardware supported
it) the max IPA size was 39 bits which is not a valid PARange
value, so we can't clamp down what we advertise in the vcpu's
id_aa64mmfr0_el1 to our IPA size. Starting in macOS 15 however,
the maximum IPA size is 40 bits (if it's supported in the hardware
as well) which is also a valid PARange value so we can set our IPA
size to the maximum as well as clamp down the PARange we advertise
to the guest. This allows VMs with 64+ GB of RAM and should fix the
oddness of the PARange situation as well.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-4-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This addition will be necessary for some HVF related work to follow.
For HVF on ARM there exists a set of APIs in macOS 13 to be able to
adjust the IPA size for a given VM. This is useful as by default HVF
uses 36 bits as the IPA size, so to support guests with > 64GB of RAM
we'll need to reach for this.
To have all the info necessary to carry this out however, we need some
plumbing to be able to grab the memory map and compute the highest GPA
prior to creating the VM. This is almost exactly like what kvm_type is
used for on ARM today, and is also what this will be used for. We will
compute the highest GPA and find what IPA size we'd need to satisfy this,
and if it's valid (macOS today caps at 40b) we'll set this to be the IPA
size in coming patches. This new method is only needed (today at least)
on ARM, and obviously only for HVF/macOS, so admittedly it is much less
generic than kvm_type today, but it seemed a somewhat sane way to get
the information we need from the memmap at VM creation time.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-2-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed explicit setting of field to NULL on x86]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We used to need the transitional_function machinery to handle bus
classes and device classes which still used their legacy reset
handling. We have now converted all bus classes to three phase
reset, and simplified the device class legacy reset so it is just an
adapting wrapper function around registration of a hold phase method.
There are therefore no more users of the transitional_function
machinery and we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830145812.1967042-12-peter.maydell@linaro.org
Now that all devices which still implement a the legacy reset method
register it via device_class_legacy_reset(), we can simplify the
handling of these devices. Instead of using the complex
Resettable::get_transitional_function machinery, we register a hold
phase method which invokes the DeviceClass::legacy_reset method.
This will allow us to remove all the get_transitional_function
handling from resettable.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240830145812.1967042-11-peter.maydell@linaro.org
Currently we have transitional machinery between legacy reset
and three phase reset that works in two directions:
* if you invoke three phase reset on a device which has set
the DeviceClass::legacy_reset method, we detect this in
device_get_transitional_reset() and arrange that we call
the legacy_reset method during the hold phase of reset
* if you invoke legacy reset on a device which implements
three phase reset, the default legacy_reset method is
device_phases_reset(), which does a three-phase reset
of the device
However, we have now eliminated all the places which could invoke
legacy reset on a device, which means that the function
device_phases_reset() is never called -- it serves only as the value
of DeviceClass::legacy_reset that indicates that the subclass never
overrode the legacy reset method. So we can delete it, and instead
check for legacy_reset != NULL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-10-peter.maydell@linaro.org
Rename the DeviceClass::reset field to legacy_reset; this is helpful
both in flagging up that it's best not used in new code and in
making it easy to search for where it's being used still.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-9-peter.maydell@linaro.org
Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
Define a device_class_set_legacy_reset() function which
sets the DeviceClass::reset field. This serves two purposes:
* it makes it clearer to the person writing code that
DeviceClass::reset is now legacy and they should look for
the new alternative (which is Resettable)
* it makes it easier to rename the reset field (which in turn
makes it easier to find places that call it)
The Coccinelle script can be used to automatically convert code that
was doing an open-coded assignment to DeviceClass::reset to call
device_class_set_legacy_reset() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-7-peter.maydell@linaro.org
There are no callers of device_class_set_parent_reset() left in the tree,
as they've all been converted to use three-phase reset and the
corresponding resettable_class_set_parent_phases() function.
Remove device_class_set_parent_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-5-peter.maydell@linaro.org
Convert the virtio-ccw code to three-phase reset. This allows us to
remove a call to device_class_set_parent_reset(), replacing it with
the three-phase equivalent resettable_class_set_parent_phases().
Removing all the device_class_set_parent_reset() uses will allow us
to remove some of the glue code that interworks between three-phase
and legacy reset.
This is a simple conversion, with no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-3-peter.maydell@linaro.org
Convert the TYPE_CCW_DEVICE to three-phase reset. This is a
device class which is subclassed, so it needs to be three-phase
before we can convert the subclass.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240830145812.1967042-2-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
+OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
=Plwu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240912
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
# 38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
# ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
# +OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
# =Plwu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Sep 2024 14:01:34 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Add acpi SPCR table support
hw/loongarch: virt: pass random seed to fdt
hw/loongarch: virt: support up to 4 serial ports
target/loongarch: Support QMP dump-guest-memory
target/loongarch/kvm: Add vCPU reset function
hw/loongarch: Remove default enable with VIRTIO_VGA device
target/loongarch: Add compatible support about VM reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
=ySRy
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
# Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
# LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
# xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
# 24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
# lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
# =ySRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Sep 2024 14:50:29 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/acpi/ich9: Add periodic and swsmi timer
virtio-mem: don't warn about THP sizes on a kernel without THP support
hw/audio/virtio-sound: fix heap buffer overflow
hw/cxl: fix physical address field in get scan media results output
virtio-pci: Add lookup subregion of VirtIOPCIRegion MR
vhost_net: configure all host notifiers in a single MR transaction
tests/acpi: pc: update golden masters for DSDT
hw/i386/acpi-build: Return a pre-computed _PRT table
tests/acpi: pc: allow DSDT acpi table changes
intel_iommu: Make PASID-cache and PIOTLB type invalid in legacy mode
intel_iommu: Fix invalidation descriptor type field
virtio: rename virtio_split_packed_update_used_idx
hw/pci/pci-hmp-cmds: Avoid displaying bogus size in 'info pci'
pci: don't skip function 0 occupancy verification for devfn auto assign
hw/isa/vt82c686.c: Embed i8259 irq in device state instead of allocating
hw: Move declaration of IRQState to header and add init function
virtio: Always reset vhost devices
virtio: Allow .get_vhost() without vhost_started
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Serial port console redirection table can be used for default serial
port selection, like chosen stdout-path selection with FDT method.
With acpi SPCR table added, early debug console can be parsed from
SPCR table with simple kernel parameter earlycon rather than
earlycon=uart,mmio,0x1fe001e0
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907073037.243353-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function.
This is the same procedure that's done in b91b6b5a2c ("hw/microblaze:
pass random seed to fdt"), e4b4f0b71c ("hw/riscv: virt: pass random seed
to fdt"), c6fe3e6b4c ("hw/openrisc: virt: pass random seed to fdt"),
67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry"), c287941a4d
("hw/rx: pass random seed to fdt"), 5e19cc68fb ("hw/mips: boston: pass
random seed to fdt"), 6b23a67916 ("hw/nios2: virt: pass random seed to fdt")
c4b075318e ("hw/ppc: pass random seed to fdt"), and 5242876f37
("hw/arm/virt: dt: add rng-seed property").
These earlier commits later were amended to rerandomize the RNG seed on
snapshot load, but the LoongArch code somehow already does that, despite
not having this patch here, presumably due to some lucky copy and
pasting.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240905153316.2038769-1-Jason@zx2c4.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In order to support additional channels of communication using
`-serial`, add several serial ports, up to the standard 4 generally
supported by the 8250 driver.
Fixed: https://lore.kernel.org/all/20240907143439.2792924-1-Jason@zx2c4.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Bibo Mao <maobibo@loongson.cn>
[gaosong: ACPI uart need't reverse order]
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907143439.2792924-1-Jason@zx2c4.com>
For virtio VGA deivce libvirt will select VIRTIO_VGA firstly rather than
VIRTIO_GPU, VIRTIO_VGA device supports frame buffer however it requires
legacy VGA compatible support. Frame buffer area 0xa0000 -- 0xc0000
conflicts with low memory area 0 -- 0x10000000.
Here remove default support for VIRTIO_VGA device, VIRTIO_GPU is prefered
on LoongArch system. For frame buffer video card support, standard VGA can
be used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240823073050.2619484-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This patch implements the periodic and the swsmi ICH9 chipset timers. They are
especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF)
using QEMU.
For backwards compatibility, the compat properties "x-smi-swsmi-timer",
and "x-smi-periodic-timer" are introduced.
Additionally, writes to the SMI_STS register are enabled for the
corresponding two bits using a write mask to make future work easier.
Signed-off-by: Dominic Prinz <git@dprinz.de>
Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the config directory in sysfs does not exist at all, we are dealing
with a system that does not support THPs. Simply use 1 MiB block size
then, instead of warning "Could not detect THP size, falling back to
..." and falling back to the default THP size.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240910163433.2100295-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the guest may write to the device configuration space,
whereas the virtio sound device specification in chapter 5.14.4
clearly states that the fields in the device configuration space
are driver-read-only.
Remove the set_config function from the virtio_snd class.
This also prevents a heap buffer overflow. See QEMU issue #2296.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2296
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240901130112.8242-1-vr_qemu@t-online.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using the mailbox command get scan media results, the scan media
restart physical address field in the ouput palyload is not 64-byte
aligned.
This patch removed the error source of the restart physical address.
The Scan Media Restart Physical Address is the location from which the
host should restart the Scan Media operation. [5:0] bits are reserved.
Refer to CXL spec r3.1 Table 8-146
Fixes: 89b5cfcc31 ("hw/cxl: Add get scan media results cmd support")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/linux-cxl/20240819154206.16456-1-engguopeng@buaa.edu.cn/
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Message-Id: <20240825102212.3871-1-engguopeng@buaa.edu.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now virtio_address_space_lookup only lookup common/isr/device/notify
MR and exclude their subregions.
When VHOST_USER_PROTOCOL_F_HOST_NOTIFIER enable, the notify MR has
host-notifier subregions and we need use host-notifier MR to
notify the hardware accelerator directly instead of eventfd notify.
Further more, maybe common/isr/device MR also has subregions in
the future, so need memory_region_find for each MR incluing
their subregions.
Add lookup subregion of VirtIOPCIRegion MR instead of only lookup container MR.
Fixes: a93c8d8 ("virtio-pci: Replace modern_as with direct access to modern_bar")
Co-developed-by: Zuo Boqun <zuoboqun@baidu.com>
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Signed-off-by: Zuo Boqun <zuoboqun@baidu.com>
Message-Id: <20240903120304.97833-1-gaoshiyuan@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the vhost_net device which has multiple virtqueues to batch
the setup of all its host notifiers. This significantly reduces the
vhost_net device starting and stoping time, e.g. the time spend
on enabling notifiers reduce from 630ms to 75ms and the time spend on
disabling notifiers reduce from 441ms to 45ms for a VM with 192 vCPUs
and 15 vhost-user-net devices (64vq per device) in our case.
Signed-off-by: zuoboqun <zuoboqun@baidu.com>
Message-Id: <20240816070835.8309-1-zuoboqun@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When qemu runs without kvm acceleration the ACPI executions take a great
amount of time. If they take more than the default time (30sec), the
ACPI calls fail and the system might not behave correctly.
Now the _PRT table is computed on the fly. We can drastically reduce the
execution of the _PRT method if we return a pre-computed table.
Without this patch:
[ 51.343484] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 51.527032] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 51.530049] virtio-pci 0000:00:02.0: can't derive routing for PCI INT A
[ 51.530797] virtio-pci 0000:00:02.0: PCI INT A: no GSI
[ 81.922901] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 82.103534] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 82.106088] virtio-pci 0000:00:04.0: can't derive routing for PCI INT A
[ 82.106761] virtio-pci 0000:00:04.0: PCI INT A: no GSI
[ 112.192568] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 112.486687] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 112.489554] virtio-pci 0000:00:05.0: can't derive routing for PCI INT A
[ 112.490027] virtio-pci 0000:00:05.0: PCI INT A: no GSI
[ 142.559448] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 142.718596] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 142.722889] virtio-pci 0000:00:06.0: can't derive routing for PCI INT A
[ 142.724578] virtio-pci 0000:00:06.0: PCI INT A: no GSI
With this patch:
[ 22.938076] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[ 24.214002] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 25.465170] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 27.944920] ACPI: \_SB_.LNKC: Enabled at IRQ 11
ACPI disassembly:
Scope (PCI0)
{
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
Return (Package (0x80)
{
Package (0x04)
{
0xFFFF,
Zero,
LNKD,
Zero
},
Package (0x04)
{
0xFFFF,
One,
LNKA,
Zero
},
Package (0x04)
{
0xFFFF,
0x02,
LNKB,
Zero
},
Package (0x04)
{
0xFFFF,
0x03,
LNKC,
Zero
},
Package (0x04)
{
0x0001FFFF,
Zero,
LNKS,
Zero
},
Context: https://lore.kernel.org/virtualization/20240417145544.38d7b482@imammedo.users.ipa.redhat.com/T/#t
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240814115736.1580337-3-ribalda@chromium.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vtd_process_inv_desc(), VTD_INV_DESC_PC and VTD_INV_DESC_PIOTLB are
bypassed without scalable mode check. These two types are not valid
in legacy mode and we should report error.
Fixes: 4a4f219e8a ("intel_iommu: add scalable-mode option to make scalable mode work")
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240814071321.2621384-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to spec, invalidation descriptor type is 7bits which is
concatenation of bits[11:9] and bits[3:0] of invalidation descriptor.
Currently we only pick bits[3:0] as the invalidation type and treat
bits[11:9] as reserved zero. This is not a problem for now as bits[11:9]
is zero for all current invalidation types. But it will break if newer
type occupies bits[11:9].
Fix it by taking bits[11:9] into type and make reserved bits check accurate.
Suggested-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20240814071321.2621384-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_split_packed_update_used_idx should be
virtio_queue_split_update_used_idx like
virtio_split_packed_update_used_idx.
Signed-off-by: Wenyu Huang <huangwenyuu@outlook.com>
Message-Id: <TYBP286MB036536B9015994AA5F3E4495ACB22@TYBP286MB0365.JPNP286.PROD.OUTLOOK.COM>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When BAR aren't mapped, we get:
(qemu) info pci
Bus 0, device 0, function 0:
Host bridge: PCI device dead:beef
...
BAR4: 32 bit memory at 0xffffffffffffffff [0x00000ffe].
BAR5: I/O at 0xffffffffffffffff [0x0ffe].
Check the BAR is mapped comparing its address to PCI_BAR_UNMAPPED
which is what the PCI layer uses for unmapped BARs.
See pci_bar_address and pci_update_mappings implementations and
in "hw/pci/pci.h":
typedef struct PCIIORegion {
pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
#define PCI_BAR_UNMAPPED (~(pcibus_t)0)
...
This improves the logging, not displaying bogus sizes:
(qemu) info pci
Bus 0, device 0, function 0:
Host bridge: PCI device dead:beef
...
BAR4: 32 bit memory (not mapped)
BAR5: I/O (not mapped)
Remove trailing dot which is not used in other commands format.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240801131449.51328-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the devfn is already assigned in the command line, the
do_pci_register_device() may verify if the function 0 is already occupied.
However, when devfn < 0, the verification is skipped because it is part of
the last "else if".
For instance, suppose there is already a device at addr=00.00 of a port.
-device pcie-root-port,bus=pcie.0,chassis=115,id=port01,addr=0e.00 \
-device virtio-net-pci,bus=port01,id=vnet01,addr=00.00 \
When 'addr' is specified for the 2nd device, the hotplug is denied.
(qemu) device_add virtio-net-pci,bus=port01,id=vnet02,addr=01.00
Error: PCI: slot 0 function 0 already occupied by virtio-net-pci, new func virtio-net-pci cannot be exposed to guest.
When 'addr' is automatically assigned, the hotplug is not denied. This is
because the verification is skipped.
(qemu) device_add virtio-net-pci,bus=port01,id=vnet02
warning: PCI: slot 1 is not valid for virtio-net-pci, parent device only allows plugging into slot 0.
Fix the issue by moving the verification into an independent 'if'
statement.
Fixes: 3f1e1478db ("enable multi-function hot-add")
Reported-by: Aswin Unnikrishnan <aswin.u.unnikrishnan@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20240708041056.54504-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid a warning about unfreed qemu_irq embed the i8259 irq in the
device state instead of allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <b70b9e72063b4dd4005bf4bc040b84f2bb617bf4.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
To allow embedding a qemu_irq in a struct move its definition to the
header and add a function to init it in place without allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e3ffd0f6ef8845d0f7247c9b6ff33f7ee8b432cf.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Requiring `vhost_started` to be true for resetting vhost devices in
`virtio_reset()` seems like the wrong condition: Most importantly, the
preceding `virtio_set_status(vdev, 0)` call will (for vhost devices) end
up in `vhost_dev_stop()` (through vhost devices' `.set_status`
implementations), setting `vdev->vhost_started = false`. Therefore, the
gated `vhost_reset_device()` call is unreachable.
`vhost_started` is not documented, so it is hard to say what exactly it
is supposed to mean, but judging from the fact that `vhost_dev_start()`
sets it and `vhost_dev_stop()` clears it, it seems like it indicates
whether there is a vhost back-end, and whether that back-end is
currently running and processing virtio requests.
Making a reset conditional on whether the vhost back-end is processing
virtio requests seems wrong; in fact, it is probably better to reset it
only when it is not currently processing requests, which is exactly the
current order of operations in `virtio_reset()`: First, the back-end is
stopped through `virtio_set_status(vdev, 0)`, then we want to send a
reset.
Therefore, we should drop the `vhost_started` condition, but in its
stead we then have to verify that we can indeed send a reset to this
vhost device, by not just checking `k->get_vhost != NULL` (introduced by
commit 95e1019a4a), but also that the vhost back-end is connected
(`hdev = k->get_vhost(); hdev != NULL && hdev->vhost_ops != NULL`).
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20240723163941.48775-3-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Historically, .get_vhost() was probably only called when
vdev->vhost_started is true. However, we now decidedly want to call it
also when vhost_started is false, specifically so we can issue a reset
to the vhost back-end while device operation is stopped.
Some .get_vhost() implementations dereference some pointers (or return
offsets from them) that are probably guaranteed to be non-NULL when
vhost_started is true, but not necessarily otherwise. This patch makes
all such implementations check all such pointers, returning NULL if any
is NULL.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20240723163941.48775-2-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
VfioMigrationState has a 'prefix' that overrides the generated
enumeration constants' prefix to QAPI_VFIO_MIGRATION_STATE.
We could simply drop 'prefix', but then the enumeration constants
would look as if they came from kernel header linux/vfio.h.
Rename the type to QapiVfioMigrationState instead, so that 'prefix' is
not needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-20-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendAlgType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTODEV_BACKEND_ALG.
We could simply drop 'prefix', but I think the abbreviation "alg" is
less than clear.
Additionally rename the type to QCryptodevBackendAlgoType. The prefix
becomes QCRYPTODEV_BACKEND_ALGO_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-19-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendServiceType has a 'prefix' that overrides the
generated enumeration constants' prefix to QCRYPTODEV_BACKEND_SERVICE.
Drop it. The prefix becomes QCRYPTODEV_BACKEND_SERVICE_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-18-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoHashAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_HASH_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_HASH_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoHashAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoHashAlgo instead. The prefix becomes to
QCRYPTO_HASH_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-12-armbru@redhat.com>
[Conflicts with merge commit 7bbadc60b5 resolved]
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
CpuS390Entitlement has a 'prefix' to change the generated enumeration
constants' prefix from CPU_S390_ENTITLEMENT to S390_CPU_ENTITLEMENT.
Rename the type to S390CpuEntitlement, so that 'prefix' is not needed.
Likewise change CpuS390Polarization to S390CpuPolarization, and
CpuS390State to S390CpuState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-10-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves HmatLBDataType's generated enumeration
constant prefix from HMATLB_DATA_TYPE to HMAT_LB_DATA_TYPE, and
HmatLBMemoryHierarchy's from HMATLB_MEMORY_HIERARCHY to
HMAT_LB_MEMORY_HIERARCHY.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240904111836.3273842-8-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves OffAutoPCIBAR's generated enumeration
constant prefix from OFF_AUTOPCIBAR to OFF_AUTO_PCIBAR.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240904111836.3273842-5-armbru@redhat.com>
Adds support for 'qatzip' as an option for the multifd compression
method parameter, and implements using QAT for 'qatzip' compression and
decompression.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
Signed-off-by: Hao Xiang <hao.xiang@linux.dev>
Signed-off-by: Yichen Wang <yichen.wang@bytedance.com>
Link: https://lore.kernel.org/r/20240830232722.58272-5-yichen.wang@bytedance.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When DMA memory can't be directly accessed, as is the case when
running the device model in a separate process without shareable DMA
file descriptors, bounce buffering is used.
It is not uncommon for device models to request mapping of several DMA
regions at the same time. Examples include:
* net devices, e.g. when transmitting a packet that is split across
several TX descriptors (observed with igb)
* USB host controllers, when handling a packet with multiple data TRBs
(observed with xhci)
Previously, qemu only provided a single bounce buffer per AddressSpace
and would fail DMA map requests while the buffer was already in use. In
turn, this would cause DMA failures that ultimately manifest as hardware
errors from the guest perspective.
This change allocates DMA bounce buffers dynamically instead of
supporting only a single buffer. Thus, multiple DMA mappings work
correctly also when RAM can't be mmap()-ed.
The total bounce buffer allocation size is limited individually for each
AddressSpace. The default limit is 4096 bytes, matching the previous
maximum buffer size. A new x-max-bounce-buffer-size parameter is
provided to configure the limit for PCI devices.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240819135455.2957406-1-mnissler@rivosinc.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The TYPE_NUBUS_DEVICE class lets the user specify the nubus slot
using an int32 "slot" QOM property. Its realize method doesn't do
any range checking on this value, which Coverity notices by way of
the possibility that 'nd->slot * NUBUS_SUPER_SLOT_SIZE' might
overflow the 32-bit arithmetic it is using.
Constrain the slot value to be less than NUBUS_SLOT_NB (16).
Resolves: Coverity CID 1464070
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240830173452.2086140-4-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The datasheets for the SoC and board we model here are still
available from the NXP website; add their URLs and titles for
future reference.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
In m5208_sys_read(), we have a loop of n from 0 to 31, and we
calculate (2u << n). For the n == 31 iteration this will shift off
the top of the unsigned 32 bit integer.
This is harmless, because we're going to stop the loop with n == 31
anyway, but we can avoid the error by using 64-bit arithmetic here.
(The SDCS0 register is documented at
https://www.nxp.com/docs/en/reference-manual/MCF5208RM.pdf
section 18.4.5; we want the lower 5 bits to indicate the
RAM size, where 31 == 4GB, 30 == 2GB, and so on down.
As it happens, the layout of the mcf5208evb board memory map
means it doesn't make sense to have more than 1GB of RAM
in any case.)
Resolves: Coverity CID 1547727
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Modify to fill the opcode, idn, index, selector information of
all Query Response UPIU. because attr and flag operation of query
response upiu need these information too.
Signed-off-by: KyoungrulKim <k831.kim@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
memory_region_find() returns an MR which it is the caller's
responsibility to unref, but platform_bus_map_mmio() was
forgetting to do so, thus leaking the MR.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Message-id: 20240829131005.9196-1-gaoshiyuan@baidu.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the file is not an ELF file, arm_setup_direct_kernel_boot()
falls back to try it as a uimage or an AArch64 Image file or as
last resort a bare raw binary. We can discard load_elf_hdr()
error and silently return.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903144154.17135-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Print errors before exit. Do not exit silently.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903133940.3447430-1-changbin.du@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The system supports the Security Extensions (core and GIC). This change is
necessary to run tests which pass on the real hardware.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-id: 20240828005019.57705-1-sebastian.huber@embedded-brains.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In sbsa_fdt_add_gic_node() we g_strdup_printf() two nodename
strings, but only free one.
Since the string is actually entirely constant and we don't
make any use of printf's format-string operations, we can
drop the g_strdup_printf() use entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20240822162323.706382-1-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420
43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6
18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_TRNG device creates s->prng with g_rand_new()
in its init method, but it frees it in its unrealize method. This
results in a leak in the QOM introspection "initialize-inspect-finalize"
lifecycle:
Direct leak of 2500 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 6d5
08874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018fc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x7f6970197738 in g_rand_new_with_seed_array debian/build/deb/../../../glib/grand.c:202:17
#3 0x7f6970197816 in g_rand_new debian/build/deb/../../../glib/grand.c:286:10
#4 0x55ec8aa3656a in trng_init hw/misc/xlnx-versal-trng.c:624:15
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Move the free to finalize so it matches where we are initing
s->prng. Since that's the only thing our unrealize method was
doing, this essentially switches the whole function to be
a finalize implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-3-peter.maydell@linaro.org
Since the TYPE_XNLX_VERSAL_CFU_FDRO device creates a FIFO in its
instance_init method, we must destroy the FIFO in instance_finalize
to avoid a memory leak for the QOM introspection
"instantiate-examine-finalize" cycle:
Direct leak of 8192 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae7ee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d7ee) (BuildId: 6d508874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018f738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x55ec8d98d98d in fifo8_create util/fifo8.c:27:18
#3 0x55ec8aa2a624 in fifo32_create /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/fifo32.h:35:5
#4 0x55ec8aa2a33c in cfu_fdro_init hw/misc/xlnx-versal-cfu.c:397:5
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-2-peter.maydell@linaro.org
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the sbsa-ref board. Existing guest
code that only programs stage 1 and doesn't care about stage 2 should
continue to run with the same behaviour, but guests that do want to
do nested SMMU configurations can now do so.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240816161350.3706332-5-peter.maydell@linaro.org
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
When we added support for nested (stage 1 + stage 2) translation
to the SMMU in commit 58377c3632 we forgot to update the
comment that documents the valid values of the "stage" property.
Add the new "nested" value to it.
Fixes: 58377c3632 ("hw/arm/smmuv3: Support and advertise nesting")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-3-peter.maydell@linaro.org
Add a Xen PVH x86 machine based on the abstract PVH Machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We've been creating the virtio-mmio devices in forwards order
but since the qbus lists prepend (rather than append) entries,
the virtio busses end up with decreasing base address order.
Xen enables virtio-mmio nodes in forwards order so there's been
a missmatch. So far, we've been working around this with an
out-of-tree patch to Xen.
This reverses the order making sure the virtio busses end up
ordered with increasing base addresses avoiding the need to
patch Xen.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Rename xen_arm.c -> xen-pvh.c to better express that this
is a PVH machine and to align with x86 HVM and future PVH
machine filenames:
hw/i386/xen/xen-hvm.c
hw/i386/xen/xen-pvh.c (in preparation)
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add SMP support for Xen PVH ARM guests.
Create ms->smp.max_cpus ioreq servers to handle hotplug.
Note that ms->smp.max_cpus will be passed to us by the
user (Xen tools) set to the guests maxvcpus.
The value in mc->max_cpus is an absolute maximum for the
-smp option and won't be used to setup ioreq servers unless
the user explicitly specifies it with -smp.
If the user doesn't pass -smp on the command-line, smp.cpus
and smp.max_cpus will default to 1.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tweak machine description to better express that this is
a Xen PVH machine for ARM.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Update file header to use SPDX and remove stray empty
comment line.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Cosmetic: add comments in x86_load_linux() pointing to the kernel documentation
so that users can better understand the code.
CC: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
3 small patches to make sure we don't ship regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbEdw8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp0dsIAKTzhmBR3IviFQVo223RgcDfthxoKejTB5tv
EhGVUi4ddrViIIHsKFZ0pTHXnRcwHpPRokg6GrbqNhrAM6K7ptP8pkEK1DDkbGtq
HaeceK55nNZ/wM1O5xHpRLVc2WtxmBrliDTFHGB2HjURO/kpjoHqWbE6Sn4GILc1
EYU2T3Wn1UFgj+H4L7yF4SzmQSmyzq+7Tml6Z2GzpsatdwCoFQz2nA28piCnRMCq
lusMo2YdE6js9JS/h+zMqgKValuCyuU7S7ZbSO2dvYQwt/hgk07BegBrdsAENNh6
0IWRHrojwAg+4U6ULzbrBG6/hW2A8Q5065D8Nf9Bjy4eAU7QSbU=
=K6xx
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: regression fixes
3 small patches to make sure we don't ship regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbEdw8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp0dsIAKTzhmBR3IviFQVo223RgcDfthxoKejTB5tv
# EhGVUi4ddrViIIHsKFZ0pTHXnRcwHpPRokg6GrbqNhrAM6K7ptP8pkEK1DDkbGtq
# HaeceK55nNZ/wM1O5xHpRLVc2WtxmBrliDTFHGB2HjURO/kpjoHqWbE6Sn4GILc1
# EYU2T3Wn1UFgj+H4L7yF4SzmQSmyzq+7Tml6Z2GzpsatdwCoFQz2nA28piCnRMCq
# lusMo2YdE6js9JS/h+zMqgKValuCyuU7S7ZbSO2dvYQwt/hgk07BegBrdsAENNh6
# 0IWRHrojwAg+4U6ULzbrBG6/hW2A8Q5065D8Nf9Bjy4eAU7QSbU=
# =K6xx
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:59:27 PM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio-pci: Fix the use of an uninitialized irqfd
hw/audio/virtio-snd: fix invalid param check
vhost: Add VIRTIO_NET_F_RSC_EXT to vhost feature bits
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The crash was reported in MAC OS and NixOS, here is the link for this bug
https://gitlab.com/qemu-project/qemu/-/issues/2334https://gitlab.com/qemu-project/qemu/-/issues/2321
In this bug, they are using the virtio_input device. The guest notifier was
not supported for this device, The function virtio_pci_set_guest_notifiers()
was not called, and the vector_irqfd was not initialized.
So the fix is adding the check for vector_irqfd in virtio_pci_get_notifier()
The function virtio_pci_get_notifier() can be used in various devices.
It could also be called when VIRTIO_CONFIG_S_DRIVER_OK is not set. In this situation,
the vector_irqfd being NULL is acceptable. We can allow the device continue to boot
If the vector_irqfd still hasn't been initialized after VIRTIO_CONFIG_S_DRIVER_OK
is set, it means that the function set_guest_notifiers was not called before the
driver started. This indicates that the device is not using the notifier.
At this point, we will let the check fail.
This fix is verified in vyatta,MacOS,NixOS,fedora system.
The bt tree for this bug is:
Thread 6 "CPU 0/KVM" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7c817be006c0 (LWP 1269146)]
kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
817 if (irqfd->users == 0) {
(gdb) thread apply all bt
...
Thread 6 (Thread 0x7c817be006c0 (LWP 1269146) "CPU 0/KVM"):
0 kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
1 kvm_virtio_pci_vector_use_one () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:893
2 0x00005983657045e2 in memory_region_write_accessor () at ../qemu-9.0.0/system/memory.c:497
3 0x0000598365704ba6 in access_with_adjusted_size () at ../qemu-9.0.0/system/memory.c:573
4 0x0000598365705059 in memory_region_dispatch_write () at ../qemu-9.0.0/system/memory.c:1528
5 0x00005983659b8e1f in flatview_write_continue_step.isra.0 () at ../qemu-9.0.0/system/physmem.c:2713
6 0x000059836570ba7d in flatview_write_continue () at ../qemu-9.0.0/system/physmem.c:2743
7 flatview_write () at ../qemu-9.0.0/system/physmem.c:2774
8 0x000059836570bb76 in address_space_write () at ../qemu-9.0.0/system/physmem.c:2894
9 0x0000598365763afe in address_space_rw () at ../qemu-9.0.0/system/physmem.c:2904
10 kvm_cpu_exec () at ../qemu-9.0.0/accel/kvm/kvm-all.c:2917
11 0x000059836576656e in kvm_vcpu_thread_fn () at ../qemu-9.0.0/accel/kvm/kvm-accel-ops.c:50
12 0x0000598365926ca8 in qemu_thread_start () at ../qemu-9.0.0/util/qemu-thread-posix.c:541
13 0x00007c8185bcd1cf in ??? () at /usr/lib/libc.so.6
14 0x00007c8185c4e504 in clone () at /usr/lib/libc.so.6
Fixes: 2ce6cff94d ("virtio-pci: fix use of a released vector")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240806093715.65105-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b6083465f ("virtio-snd: check for invalid param shift
operands") tries to prevent invalid parameters specified by the
guest. However, the code is not correct.
Change the code so that the parameters format and rate, which are
a bit numbers, are compared with the bit size of the data type.
Fixes: 9b6083465f ("virtio-snd: check for invalid param shift operands")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240802071805.7123-1-vr_qemu@t-online.de>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_NET_F_RSC_EXT is implemented in the rx data path, which vhost
implements, so vhost needs to support the feature if it is ever to be
enabled with vhost. The feature must be disabled otherwise.
Fixes: 2974e916df ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK")
Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240802-rsc-v1-1-2b607bd2f555@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yutaro Shimizu from the Cyber Defense Institute discovered a bug in the
NVMe emulation that leaks contents of an uninitialized heap buffer if
subsystem and FDP emulation are enabled.
Cc: qemu-stable@nongnu.org
Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
-----BEGIN PGP SIGNATURE-----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=lPMG
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240820' of https://github.com/philmd/qemu into staging
Various fixes
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmbDzAsACgkQ4+MsLN6t
# wN7SvBAAwM0Frtg4ZKDZQu8XgMjLq1xVoSWjC3YJZKTpyGap5gO+7StvHg0sf9iB
# YyGqocCO+qdj9a7pTSasfGDyufpwoIZkOqkwGUWKBos76cOcHWt4e/gkl9O65Lf1
# VVKX4/xdY+a5w2eVAAdWWrYdaPWkKLm0ZZXKoeSIvN4R9A41j7J4kANhE2SweczF
# NnTt2gBnSlpRzghlVWPJKhnq+aYbvLeR7ApdNGUJDpSI1ZTh9gH1GtZFwBN7aeDo
# PvDucoui0EmuyHTVdOYOH3zihTfzKlNZECcT3Y6/6i8y5p7jLHyINHHexsKw6T56
# i5RidJMPTfM0EO6LU1GvUN5FzZy24zXOf298Fe/GMYczQsOznQd4+aFHYPb3d4hZ
# 8Vc1wB1s8XF5WGj+7bchBAUdynUnbwUqfMOb2pMXLIm21pSDnOTVgmYMnp1Kt4AA
# 9WbHiS6tUJf/HjQsep8BBNGUiVSsUPDNNhL8QN43u2C0NgNRPgtRuIV+ytgVXS1G
# 2t1QiRX0lX4ACHmw88agUCU3OhorumuDOpoitQK5jn2VutT7TqbGgibkQMFSgn9E
# Xwrmtlf7nYU9MVgXYJjH2bBh7wbOmQCqbHniEj0targkxccAMJoswG4vtKsP9zkd
# tBs6qMiZ8qSj5eoq8JBRF8bF4tONmboPZjRlboACJ0kTD5wCElA=
# =lPMG
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:49:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240820' of https://github.com/philmd/qemu:
crypto/tlscredspsk: Free username on finalize
hw/i386/pc: Ensure vmport prerequisites are fulfilled
hw/i386/pc: Unify vmport=auto handling
hw/ppc/Kconfig: Add missing SERIAL_ISA dependency to POWERNV machine
target/sparc: Restrict STQF to sparcv9
contrib/plugins/execlog: Fix shadowed declaration warning
tests/avocado: Mark ppc_hv_tests.py as non-flaky after fixed console interaction
tests/avocado: exec_command should not consume console output
linux-user/mips: Select Loongson CPU for Loongson binaries
linux-user/mips: Select MIPS64R2-generic for Rel2 binaries
linux-user/mips: Select Octeon68XX CPU for Octeon binaries
linux-user/mips: Do not try to use removed R5900 CPU
hw/remote/message.c: Don't directly invoke DeviceClass:reset
hw/dma/xilinx_axidma: Use semicolon at end of statement, not comma
target/mips: Load PTE as DATA
target/mips: Use correct MMU index in get_pte()
target/mips: Pass page table entry size as MemOp to get_pte()
qemu-options.hx: correct formatting -smbios type=4
hw/mips/loongson3_virt: Fix condition of IPI IOCSR connection
hw/mips/loongson3_virt: Store core_iocsr into LoongsonMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 4ccd5fe22f ('pc: add option
to disable PS/2 mouse/keyboard'), the vmport will not be created unless
the i8042 PS/2 controller is enabled. To avoid confusion, let's fail if
vmport was explicitly requested, but the i8042 controller is disabled.
This also changes the behavior of vmport=auto to take i8042 controller
availability into account.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <0MS3y5E-hHqODIhiuFxmCnIrXd612JIGq31UuMsz4KGCKZ_wWuF-PHGKTRSGS0nWaPEddOdF4YOczHdgorulECPo792OhWov7O9BBF6UMX4=@szczek.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The code which translates vmport=auto to on/off is currently separate
for each PC machine variant, while being functionally equivalent.
This moves the translation into a shared initialization function, while
also tightening the enum assertion.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <v8pz1uwgIYWkidgZK-o8H-qJvnSyl0641XVmNO43Qls307AA3QRPuad_py6xGe0JAxB6yDEe76oZ8tau_n-2Y6sJBCKzCujNbEUUFhd-ahI=@szczek.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The machine calls serial_hds_isa_init() which is provided by serial-isa.c,
guarded by SERIAL_ISA.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240814181534.218964-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Directly invoking the DeviceClass::reset method is a bad idea,
because if the device is using three-phase reset then it relies on
transitional reset machinery which is likely to disappear at some
point.
Reset the device in the standard way, by calling device_cold_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240813165250.2717650-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In axidma_class_init() we accidentally used a comma at the end of
a statement rather than a semicolon. This has no ill effects, but
it's obviously not intended and it means that Coccinelle scripts
for instance will fail to match on the two statements. Use a
semicolon instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240813165250.2717650-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
>>> CID 1547264: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "ipi" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
Resolves: Coverity CID 1547264
Link: https://lore.kernel.org/qemu-devel/752417ad-ab72-4fed-8d1f-af41f15bc225@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240621-loongson3-ipi-follow-v2-2-848eafcbb67e@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/972034d6-23b3-415a-b401-b8bc1cc515c9@linaro.org/
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240621-loongson3-ipi-follow-v2-1-848eafcbb67e@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This reverts commit f42cdf2ea5.
Linux does not properly handle '#msi-cells=<0>' when searching for
MSI controllers for PCI devices which results in the devices being
unable to use MSIs. A patch for Linux has been sent[1] but until it,
or something like it, is merged and in distro kernels we should stop
adding the property. It's harmless to stop adding it since the
absence of the property and a value of zero for the property mean
the same thing according to the DT binding definition.
Link: https://lore.kernel.org/all/20240816124957.130017-2-ajones@ventanamicro.com/ # 1
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240816160743.220374-5-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the misspellings of "overriden" also in code comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240813125638.395461-1-sw@weilnetz.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-20-alex.bennee@linaro.org>
Receive coalescing is visible to the target machine, so its timers
should use virtual time like other timers in virtio-net, to be
compatible with record-replay.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-10-npiggin@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-18-alex.bennee@linaro.org>
The regular qemu_bh_schedule() calls result in non-deterministic
execution of the bh in record-replay mode, which causes replay failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-9-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-17-alex.bennee@linaro.org>
This commit adds validation checks for the MCOPRE and MCOSEL values in
the rcc_update_cfgr_register function. If the MCOPRE value exceeds
0b100 or the MCOSEL value exceeds 0b111, an error is logged and the
corresponding clock mux is disabled. This helps in identifying and
handling invalid configurations in the RCC registers.
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine b-l475e-iot01a -qtest \
stdio
writeq 0x40021008 0xffffffff
EOF
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2356
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having magic numbers inside the code is not a good idea, as it
is error-prone. So, instead, create a macro with the number
definition.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-PYnZ-32MRX+PgvzhnoAV80zBKMYg61j2f=oHaGfwSsg@mail.gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: ef0e7f5fca6cd94eda415ecee670c3028c671b74.1723121692.git.mchehab+huawei@kernel.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real period is zero when both period and period_frac are zero.
Check the method ptimer_set_freq, if freq is larger than 1000 MHz,
the period is zero, but the period_frac is not, in this case, the
ptimer will work but the current code incorrectly recognizes that
the ptimer is disabled.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2306
Signed-off-by: JianZhou Yue <JianZhou.Yue@verisilicon.com>
Message-id: 3DA024AEA8B57545AF1B3CAA37077D0FB75E82C8@SHASXM03.verisilicon.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case of scsi-block, RESERVATION_CONFLICT is not a backend error,
but indicates that the guest tried to make a request that it isn't
allowed to execute. Pass the error to the guest so that it can decide
what to do with it.
Without this, if we stop the VM in response to a RESERVATION_CONFLICT
(as is the default policy in management software such as oVirt or
KubeVirt), it can happen that the VM cannot be resumed any more because
every attempt to resume it immediately runs into the same error and
stops the VM again.
One case that expects RESERVATION_CONFLICT errors to be visible in the
guest is running the validation tests in Windows 2019's Failover Cluster
Manager, which intentionally tries to execute invalid requests to see if
they are properly rejected.
Buglink: https://issues.redhat.com/browse/RHEL-50000
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240731123207.27636-5-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scsi_block_sgio_complete() has surprising behaviour in that there are
error cases in which it directly completes the request and never calls
the passed callback. In the current state of the code, this doesn't seem
to result in bugs, but with future code changes, we must be careful to
never rely on the callback doing some cleanup until this code smell is
fixed. For now, just add warnings to make people aware of the trap.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240731123207.27636-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of calling into scsi_handle_rw_error() directly from
scsi_block_sgio_complete() and skipping the normal callback, go through
the normal cleanup path by calling the callback with a positive error
value.
The important difference here is not only that the code path is cleaner,
but that the callbacks set r->req.aiocb = NULL. If we skip setting this
and the error action is BLOCK_ERROR_ACTION_STOP, resuming the VM runs
into an assertion failure in scsi_read_data() or scsi_write_data()
because the dangling aiocb pointer is unexpected.
Fixes: a108557bbf ("scsi: inline sg_io_sense_from_errno() into the callers.")
Buglink: https://issues.redhat.com/browse/RHEL-50000
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240731123207.27636-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In some error cases, scsi_block_sgio_complete() never calls the passed
callback, but directly completes the request. This leads to bugs because
its error paths are not exact copies of what the callback would normally
do.
In preparation to fix this, allow passing positive return values to the
callbacks that represent the status code that should be used to complete
the request.
scsi_handle_rw_error() already handles positive values for its ret
parameter because scsi_block_sgio_complete() calls directly into it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240731123207.27636-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reset config values in the device RESET phase, not only once
when the device is realized, because otherwise the device can
use unknown values at reset.
Since we are adding a new reset method, use the preferred
Resettable API (for a simple leaf device reset, a
DeviceClass::reset method and a ResettableClass::reset_hold
method are essentially identical).
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240802213122.86852-3-philmd@linaro.org>
When booting Linux we see:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
This is due to missing base address register write mask.
Add it to get:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff pref]
pci 0000:00:00.0: reg 0x14: [mem 0x01000000-0x01000fff pref]
pci 0000:00:00.0: reg 0x18: [mem 0x1c000000-0x1c000fff]
pci 0000:00:00.0: reg 0x1c: [mem 0x1f000000-0x1f000fff]
pci 0000:00:00.0: reg 0x20: [mem 0x1be00000-0x1be00fff]
pci 0000:00:00.0: reg 0x24: [io 0x14000000-0x14000fff]
Since this device is only used by MIPS machines which aren't
versioned, we don't need to update migration compat machinery.
Mention the datasheet referenced. Remove the "Malta assumptions
ahead" comment since the reset values from the datasheet are used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240802213122.86852-2-philmd@linaro.org>
If the user tries to use the virtio-gpu-gl device but the display
backend doesn't have OpenGL support enabled, we currently print a
rather uninformative error message:
$ qemu-system-aarch64 -M virt -device virtio-gpu-gl
qemu-system-aarch64: -device virtio-gpu-gl: opengl is not available
Since OpenGL is not enabled on display frontends by default, users
are quite likely to run into this. Improve the error message to
be more specific and to suggest to the user a path forward.
Note that the case of "user tried to enable OpenGL but the display
backend doesn't handle it" is caught elsewhere first, so we can
assume that isn't the problem:
$ qemu-system-aarch64 -M virt -device virtio-gpu-gl -display curses,gl=on
qemu-system-aarch64: OpenGL is not supported by the display
(Use of error_append_hint() requires us to add an ERRP_GUARD() to
the function, as noted in include/qapi/error.h.)
With this commit we now produce the hopefully more helpful error:
$ ./build/x86/qemu-system-aarch64 -M virt -device virtio-gpu-gl
qemu-system-aarch64: -device virtio-gpu-gl: The display backend does not have OpenGL support enabled
It can be enabled with '-display BACKEND,gl=on' where BACKEND is the name of the display backend to use.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2443
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240731154136.3494621-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity notes that the code at the end of the loop in
bmdma_prepare_buf() is unreachable. This is because in commit
9fbf0fa81f ("ide: remove hardcoded 2GiB transactional limit")
we removed the only codepath in the loop which could "break" out of
it, but didn't notice that this meant we should also remove the code
at the end of the loop.
Remove the dead code.
Resolves: Coverity CID 1547772
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Break and return once at EOF]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240805182419.22239-1-philmd@linaro.org>
Coverity complains about an overflow in isa_fdc_get_drive_max_chs()
that can happen if the loop over fd_formats never finds a match,
because we initialize *maxc to 0 and then at the end of the
function decrement it.
This can't ever actually happen because fd_formats has at least
one entry for each FloppyDriveType, so we must at least once
find a match and update *maxc, *maxh and *maxs. Assert that we
did find a match, which should keep Coverity happy and will also
detect possible bugs in the data in fd_formats.
Resolves: Coverity CID 1547663
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240731143617.3391947-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In ide_atapi_cmd_reply_end() we calculate a 16-bit size, and then
assign its two halves to s->lcyl and s->hcyl like this:
s->lcyl = size;
s->hcyl = size >> 8;
Coverity warns that the first line here can overflow the
8-bit s->lcyl variable. This is true, and in this case we're
deliberately only after the low 8 bits of the value. The
code is clearer to both humans and Coverity if we're explicit
that we only wanted the low 8 bits, though.
Resolves: Coverity CID 1547621
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240731143617.3391947-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In pflash_write() Coverity points out that we can decrement the
unsigned pfl->counter below zero, which makes it wrap around. In
fact this is harmless, because if pfl->counter is 0 at this point we
also increment pfl->wcycle to 3, and the wcycle == 3 handling doesn't
look at counter; the only way back into code which looks at the
counter value is via wcycle == 1, which will reinitialize the counter.
But it's arguably a little clearer to break early in the "counter ==
0" if(), to avoid the decrement-below-zero.
Resolves: Coverity CID 1547611
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240731143617.3391947-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We neglected to clear the @data_count index on ADMA error,
allowing to trigger assertion in sdhci_read_dataport() or
sdhci_write_dataport().
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2455
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-4-philmd@linaro.org>
Guest should not try to read the DAT lines from invalid
command state. If it still insists to do so, return a
dummy value.
Cc: qemu-stable@nongnu.org
Fixes: e2dec2eab0 ("hw/sd/sdcard: Remove default case in read/write on DAT lines")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2454
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-3-philmd@linaro.org>
On error the DAT lines are left unmodified to their
previous states. QEMU returns 0x00 for convenience.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-2-philmd@linaro.org>
Now than LoongArch target can use the TYPE_LOONGARCH_IPI
model, restrict TYPE_LOONGSON_IPI to MIPS.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-15-philmd@linaro.org>
Loongarch IPI inherits from class LoongsonIPICommonClass, and it
only contains Loongarch 3A5000 virt machine specific interfaces,
rather than mix different machine implementations together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-14-philmd@linaro.org>
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
In order to get LoongsonIPICommonClass in send_ipi_data()
in the next commit, propagate LoongsonIPICommonState.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-8-philmd@linaro.org>
Move the IPICore structure and corresponding common fields
of LoongsonIPICommonState to "hw/intc/loongson_ipi_common.h".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-7-philmd@linaro.org>
It is easier to manage one array of MMIO MR rather
than one per vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-6-philmd@linaro.org>
Introduce LOONGSON_IPI_COMMON stubs, QDev parent of LOONGSON_IPI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-4-philmd@linaro.org>
In preparation to extract common IPI code in few commits,
extract loongson_ipi_common_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-3-philmd@linaro.org>
We'll have to add LoongsonIPIClass in few commits,
so rename LoongsonIPI as LoongsonIPIState for clarity.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-2-philmd@linaro.org>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Ensure the queue index points to a valid queue when software RSS
enabled. The new calculation matches with the behavior of Linux's TAP
device with the RSS eBPF program.
Fixes: 4474e37a5b ("virtio-net: implement RX RSS processing")
Reported-by: Zhibin Hu <huzhibin5@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Old linux kernel rtl8139 drivers (ex. debian 2.1) uses outb to set the rx
mode for RxConfig. Unfortunatelly qemu does not support outb for RxConfig.
Signed-off-by: Hans <sungdgdhtryrt@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If VT-D hardware supports scalable mode, Linux will set the IQA DW field
(bit11). In qemu, the vtd_mem_write and vtd_update_iq_dw set DW field well.
However, vtd_mem_read the DW field wrong because "& VTD_IQA_QS" dropped the
value of DW.
Replace "&VTD_IQA_QS" with "& (VTD_IQA_QS | VTD_IQA_DW_MASK)" could save
the DW field.
Test patch as below:
config the "x-scalable-mode" option:
"-device intel-iommu,caching-mode=on,x-scalable-mode=on,aw-bits=48"
After Linux OS boot, check the IQA_REG DW Field by usage 1 or 2:
1. IOMMU_DEBUGFS:
Before fix:
cat /sys/kernel/debug/iommu/intel/iommu_regset |grep IQA
IQA 0x90 0x00000001001da001
After fix:
cat /sys/kernel/debug/iommu/intel/iommu_regset |grep IQA
IQA 0x90 0x00000001001da801
Check DW field(bit11) is 1.
2. devmem2 read the IQA_REG (offset 0x90):
Before fix:
devmem2 0xfed90090
/dev/mem opened.
Memory mapped at address 0x7f72c795b000.
Value at address 0xFED90090 (0x7f72c795b090): 0x1DA001
After fix:
devmem2 0xfed90090
/dev/mem opened.
Memory mapped at address 0x7fc95281c000.
Value at address 0xFED90090 (0x7fc95281c090): 0x1DA801
Check DW field(bit11) is 1.
Signed-off-by: yeeli <seven.yi.lee@gmail.com>
Message-Id: <20240725031858.1529902-1-seven.yi.lee@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In amdvi_update_iotlb() we will only put a new entry in the hash
table if to_cache.perm is not IOMMU_NONE. However we allocate the
memory for the new AMDVIIOTLBEntry and for the hash table key
regardless. This means that in the IOMMU_NONE case we will leak the
memory we alloacted.
Move the allocations into the if() to the point where we know we're
going to add the item to the hash table.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2452
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240731170019.3590563-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
with max-bytes set to 0, quota is 0 and so device does not work.
block this to avoid user confusion
Message-Id: <73a89a42d82ec8b47358f25119b87063e4a6ea57.1721818306.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In bcm2835_property_mbox_push(), some variables are defined at function scope
but used only in a smaller scope of the function:
* tag, bufsize, resplen are used only in the body of the while() loop
* tmp is used only for RPI_FWREQ_SET_POWER_STATE (and is badly named)
Declare these variables in the scope where they're needed, so the code
is easier to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-5-peter.maydell@linaro.org
In the long function bcm2835_property_mbox_push(), the variables
start_num, number and otp_row are used only in the four cases which
access OTP data, and their uses don't overlap with each other.
Make these variables have scope restricted to the cases where they're
used, so it's easier to read each individual case without having to
cross-refer up to the variable declaration at the top of the function
and check whether the variable is also used later in the loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-4-peter.maydell@linaro.org
Coverity points out that in our handling of the property
RPI_FWREQ_SET_CUSTOMER_OTP we have a potential overflow. This
happens because we read start_num and number from the guest as
unsigned 32 bit integers, but then the variable 'n' we use as a loop
counter as we iterate from start_num to start_num + number is only an
"int". That means that if the guest passes us a very large start_num
we will interpret it as negative. This will result in an assertion
failure inside bcm2835_otp_set_row(), which checks that we didn't
pass it an invalid row number.
A similar issue applies to all the properties for accessing OTP rows
where we are iterating through with a start and length read from the
guest.
Use uint32_t for the loop counter to avoid this problem. Because in
all cases 'n' is only used as a loop counter, we can do this as
part of the for(), restricting its scope to exactly where we need it.
Resolves: Coverity CID 1549401
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-3-peter.maydell@linaro.org
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
Coverity has spotted a possible problem with the OAS handling
(CID 1558464), where the error return of oas2bits() -1 is not
checked, which can cause an overflow in oas value.
oas2bits() is only called with valid inputs, harden the function
to assert that.
Reported-By: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240722103531.2377348-1-smostafa@google.com
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-H=n-3mHC+eL6YjfL1m+x+b+Fk3mkgZbN74WNxifFVow@mail.gmail.com/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio>
Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459
Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ppc_hash64_hpt_base() and ppc_hash64_hpt_mask() functions are
mostly used by mmu-hash64.c only but there is one call to
ppc_hash64_hpt_mask() in hw/ppc/spapr_vhyp_mmu.c.in a helper function
that can be moved to mmu-hash64.c which allows these functions to be
removed from the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Additional END state 'info pic' information as added. The 'ignore',
'crowd' and 'precluded escalation control' bits of an Event Notification
Descriptor are all used when delivering an interrupt targeting a VP-group
or crowd.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In XIVE Gen 2 there were some minor changes to the TIMA header that were
updated when printed.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving xive2_nvp_pic_print_info() to align with the other "pic_print_info"
functions.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fail VST entry address computation if firmware doesn't define a descriptor
for one of the Virtualization Structure Tables (VST), there's no point in
trying to compute the address of its entry. Abort the operation and log
an error.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Set Translation Table for the NVC port space is missing. The xive model
doesn't take into account the remapping of IO operations via the Set
Translation Table but firmware is allowed to define it for the Notify
Virtual Crowd (NVC), like it's already done for the other VST tables.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Enable NVG and NVC VST tables for index compression which indicates the number
of bits the address is shifted to the right for the table accesses.
The compression values are defined as:
0000 - No compression
0001 - 1 bit shift
0010 - 2 bit shift
....
1000 - 8 bit shift
1001-1111 - No compression
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Both the virtualization layer (VC) and presentation layer (PC) need to
be configured to access the VSTs. Since the information is redundant,
the xive model combines both into one set of tables and only the
definitions going through the VC are kept. The definitions through the
PC are ignored. That works well as long as firmware calls the VC for
all the tables.
For the NVG and NVC tables, it can make sense to only configure them
with the PC, since they are only used by the presenter. So this patch
allows firmware to configure the VST tables through the PC as well.
The definitions are still shared, since the VST tables can be set
through both the VC and/or PC, they are dynamically re-mapped in
memory by first deleting the memory subregion.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The cache watch facility uses the same register interface to handle
entries in the NVP, NVG and NVC tables. A bit-field in the 'watchX
specification' register tells the table type. So far, that bit-field
was not read and the code assumed a read/write to the NVP table.
This patch allows to read/write entries in the NVG and NVC table as
well.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for writing a completion notification byte in memory
whenever a cache flush or queue sync inject operation is requested by
software. QEMU does not cache any of the XIVE data that is in memory and
therefore it simply writes the completion notification byte at the time
that the operation is requested.
Co-authored-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Made changes to some structure and define elements to ease review in
next patchset.
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
XIVE offers a 'cache watch facility', which allows software to read/update
a potentially cached table entry with no software lock. There's one such
facility in the Virtualization Controller (VC) to update the ESB and END
entries and one in the Presentation Controller (PC) to update the
NVP/NVG/NVC entries.
Each facility has 4 cache watch engines to control the updates and
firmware can request an available engine by querying the hardware
'watch_assign' register of the VC or PC. The engine is then reserved and
is released after the data is updated by reading the 'watch_spec' register
(which also allows to check for a conflict during the update).
If no engine is available, the special value 0xFF is returned and
firmware is expected to repeat the request until an engine becomes
available.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add Microchip's 25CSM04 Serial EEPROM to m25p80. 25CSM04 provides 4 Mbits
of Serial EEPROM utilizing the Serial Peripheral Interface (SPI) compatible
bus. The device is organized as 524288 bytes of 8 bits each (512Kbyte) and
is optimized for use in consumer and industrial applications where reliable
and dependable nonvolatile memory storage is essential.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit SPI shift engine and sequencer logic is implemented.
Shift engine performs serialization and de-serialization according to the
control by the sequencer and according to the setup defined in the
configuration registers. Sequencer implements the main control logic and
FSM to handle data transmit and data receive control of the shift engine.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPI controller device model supports a connection to a single SPI responder.
This provide access to SPI seeproms, TPM, flash device and an ADC controller.
All SPI function control is mapped into the SPI register space to enable full
control by firmware. In this commit SPI configuration component is modelled
which contains all SPI configuration and status registers as well as the hold
registers for data to be sent or having been received.
An existing QEMU SSI framework is used and SSI_BUS is created.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
[np: Fix FDT macro compile for qtest]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Recent POWER CPUs can operate in "LPAR per core" or "LPAR per thread"
modes. In per-core mode, some SPRs and IPI doorbells are shared between
threads in a core. In per-thread mode, supervisor and user state is
not shared between threads.
OpenPOWER systems after POWER8 use LPAR per thread mode, and it is
required for KVM. Enterprise systems use LPAR per core mode, as they
partition the machine by core.
Implement a lpar-per-core machine option for powernv machines. This
is fixed true for POWER8 machines, and defaults off for P9 and P10.
With this change, powernv8 SMT now works sufficiently to run Linux,
with a single socket. Multi-threaded KVM guests still have problems,
as does multi-socket Linux boot.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The PC unit in the processor core contains xscom registers that provide
low level status and control of the CPU.
This implements "direct controls", sufficient for skiboot firmware,
which uses it to send NMI IPIs between CPUs.
POWER10 is sufficiently different from POWER9 (particularly with respect
to QME and special wakeup) that it is not trivial to implement POWER9
support by reusing the code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power CPUs have an execution control facility that can pause, resume,
and cause NMIs, among other things. Add a function that will nmi a CPU
and resume it if it was paused, in preparation for implementing the
control facility.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Big-core implementation is complete, so expose it as a machine
property that may be set with big-core=on option on powernv9 and
powernv10 machines.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 has a quirk in its ChipTOD addressing that requires the even
small-core to be selected even when programming the odd small-core.
This allows skiboot chiptod init to run in big-core mode.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power9/10 CPUs have PVR[51] set in small-core mode and clear in big-core
mode. This is used by skiboot firmware.
PVR is not hypervisor-privileged but it is not so important that spapr
to implement this because it's generally masked out of PVR matching code
in kernels, and only used by firmware.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
device-tree building needs to account for big-core mode, because it is
driven by qemu cores (small cores). Every second core should be skipped,
and every core should describe threads for both small-cores that make
up the big core.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER9 and POWER10 machines come in two variants, big-core and
small-core. Big-core machines are SMT8 from software's point of view,
but the low level platform topology ("xscom registers and pervasive
addressing"), these look more like a pair of small cores ganged
together.
Presently the way this is modelled is to create one SMT8 PnvCore and add
special cases to xscom and pervasive for big-core mode that tries to
split this into two small cores, but this is becoming too complicated to
manage.
A better approach is to create 2 core structures and ganging them
together to look like an SMT8 core in TCG. Then the xscom and pervasive
models mostly do not need to differentiate big and small core modes.
This change adds initial mode bits and QEMU topology handling to
split SMT8 cores into 2xSMT4 cores.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The decision to branch out to a slower SMT path in instruction
emulation will become a bit more complicated with the way that
"big-core" topology that will be implemented in subsequent changes.
Hide these details from the wider CPU emulation code with a bool
has_smt_siblings flag that can be set by machine initialisation.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The way SMT thread siblings are matched is clunky, using hard-coded
logic that checks the PIR SPR.
Change that to use a new core_index variable in the CPUPPCState,
where all siblings have the same core_index. CPU realize routines have
flexibility in setting core/sibling topology.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The chip_pir chip class method allows the platform to set the PIR
processor identification register. Extend this to a more general
ID function which also allows the TIR to be set. This is in
preparation for "big core", which is a more complicated topology
of cores and threads.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use a class attribute to specify the number of SMT threads per core
permitted for different machines, 8 for powernv8 and 4 for powernv9/10.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The timebase state machine is per per-core state and can be driven
by any thread in the core. It is currently implemented as a hack
where the state is in a CPU structure and only thread 0's state is
accessed by the chiptod, which limits programming the timebase
side of the state machine to thread 0 of a core.
Move the state out into PnvCore and share it among all threads.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This helps move core state from CPU to core structures.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
One of the functions of the ADU is indirect memory access engines that
send and receive data via ADU registers.
This implements the ADU LPC memory access functionality sufficiently
for IBM proprietary firmware to access the UART and print characters
to the serial port as it does on real hardware.
This requires a linkage between adu and lpc, which allows adu to
perform memory access in the lpc space.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This implements a framework for an ADU unit model.
The ADU unit actually implements XSCOM, which is the bridge between MMIO
and PIB. However it also includes control and status registers and other
functions that are exposed as PIB (xscom) registers.
To keep things simple, pnv_xscom.c remains the XSCOM bridge
implementation, and pnv_adu.c implements the ADU registers and other
functions.
So far, just the ADU no-op registers in the pnv_xscom.c default handler
are moved over to the adu model.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The POWER8 LPC ISA device irqs all get combined and reported to the line
connected the PSI LPCHC irq. POWER9 changed this so only internal LPC
host controller irqs use that line, and the device irqs get routed to
4 new lines connected to PSI SERIRQ0-3.
POWER9 also introduced a new feature that automatically clears the irq
status in the LPC host controller when EOI'ed, so software does not have
to.
The powernv OPAL (skiboot) firmware managed to work because the LPCHC
irq handler scanned all LPC irqs and handled those including clearing
status even on POWER9 systems. So LPC irqs worked despite OPAL thinking
it was running in POWER9 mode. After this change, UART interrupts show
up on serirq1 which is where OPAL routes them to:
cat /proc/interrupts
...
20: 0 XIVE-IRQ 1048563 Level opal-psi#0:lpchc
...
25: 34 XIVE-IRQ 1048568 Level opal-psi#0:lpc_serirq_mux1
Whereas they previously turn up on lpchc.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The LPC HC irq status register bits are set when an LPC IRQSER input is
asserted. These irq status bits drive the PSI irq to the CPU interrupt
controller. The LPC HC irq status bits are cleared by software writing
to the register with 1's for the bits to clear.
Existing register write was clearing the irq status bits even when the
input was asserted, this results in interrupts being lost.
This fix changes the behavior to keep track of the device IRQ status
in internal state that is separate from the irq status register, and
only allowing the irq status bits to be cleared if the associated
input is not asserted.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
[np: rebased before P9 PSI SERIRQ patch, adjust changelog/comments]
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power10 DD1.0 was dropped in:
commit 8f054d9ee8 ("ppc: Drop support for POWER9 and POWER10 DD1 chips")
Use the newer Power10 DD2 chips cfam id.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
FDT properties are aligned by 4 bytes, not 8 bytes.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This cap did not add the migration code when it was introduced. This
results in migration failure when changing the default using the
command line.
Cc: qemu-stable@nongnu.org
Fixes: ccc5a4c5e1 ("spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
-----BEGIN PGP SIGNATURE-----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=J/I2
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240723' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmagFF8ACgkQ4+MsLN6t
# wN5bKg//f5TwUhsy2ff0FJpHheDOj/9Gc2nZ1U/Fp0E5N3sz3A7MGp91wye6Xwi3
# XG34YN9LK1AVzuCdrEEs5Uaxs1ZS1R2mV+fZaGHwYYxPDdnXxGyp/2Q0eyRxzbcN
# zxE2hWscYSZbPVEru4HvZJKfp4XnE1cqA78fJKMAdtq0IPq38tmQNRlJ+gWD9dC6
# ZUHXPFf3DnucvVuwqb0JYO/E+uJpcTtgR6pc09Xtv/HFgMiS0vKZ1I/6LChqAUw9
# eLMpD/5V2naemVadJe98/dL7gIUnhB8GTjsb4ioblG59AO/uojutwjBSQvFxBUUw
# U5lX9OSn20ouwcGiqimsz+5ziwhCG0R6r1zeQJFqUxrpZSscq7NQp9ygbvirm+wS
# edLc8yTPf4MtYOihzPP9jLPcXPZjEV64gSnJISDDFYWANCrysX3suaFEOuVYPl+s
# ZgQYRVSSYOYHgNqBSRkPKKVUxskSQiqLY3SfGJG4EA9Ktt5lD1cLCXQxhdsqphFm
# Ws3zkrVVL0EKl4v/4MtCgITIIctN1ZJE9u3oPJjASqSvK6EebFqAJkc2SidzKHz0
# F3iYX2AheWNHCQ3HFu023EvFryjlxYk95fs2f6Uj2a9yVbi813qsvd3gcZ8t0kTT
# +dmQwpu1MxjzZnA6838R6OCMnC+UpMPqQh3dPkU/5AF2fc3NnN8=
# =J/I2
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Jul 2024 06:36:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240723' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Add myself as a reviewer of machine core
MAINTAINERS: Cover guest-agent in QAPI schema
util/fifo8: Introduce fifo8_drop()
util/fifo8: Expose fifo8_pop_buf()
util/fifo8: Rename fifo8_pop_buf() -> fifo8_pop_bufptr()
util/fifo8: Rename fifo8_peek_buf() -> fifo8_peek_bufptr()
util/fifo8: Use fifo8_reset() in fifo8_create()
util/fifo8: Fix style
chardev/char-fe: Document returned value on error
hw/char/goldfish: Use DMA memory API
hw/nubus/virtio-mmio: Fix missing ERRP_GUARD() in realize handler
dump: make range overlap check more readable
crypto/block-luks: make range overlap check more readable
system/memory_mapping: make range overlap check more readable
sparc/ldst_helper: make range overlap check more readable
cxl/mailbox: make range overlap check more readable
util/range: Make ranges_overlap() return bool
hw/mips/loongson3_virt: remove useless type cast
hw/i2c/mpc_i2c: Fix mmio region size
docs/interop/firmware.json: convert "Example" section
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* IOMMUFD Dirty Tracking support
* Fix for a possible SEGV in IOMMU type1 container
* Dropped initialization of host IOMMU device with mdev devices
-----BEGIN PGP SIGNATURE-----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=cViP
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240723-1' of https://github.com/legoater/qemu into staging
vfio queue:
* IOMMUFD Dirty Tracking support
* Fix for a possible SEGV in IOMMU type1 container
* Dropped initialization of host IOMMU device with mdev devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmafyVUACgkQUaNDx8/7
# 7KGebRAAzEYxvstDxSPNF+1xx937TKbRpiKYtspTfEgu4Ht50MwO2ZqnVWzTBSwa
# qcjhDf2avMBpBvkp4O9fR7nXR0HRN2KvYrBSThZ3Qpqu4KjxCAGcHI5uYmgfizYh
# BBLrw3eWME5Ry220TinQF5KFl50vGq7Z/mku5N5Tgj2qfTfCXYK1Kc19SyAga49n
# LSokTIjZAGJa4vxrE7THawaEUjFRjfCJey64JUs/TPJaGr4R1snJcWgETww6juUE
# 9OSw/xl0AoQhaN/ZTRC1qCsBLUI2MVPsC+x+vqVK62HlTjCx+uDRVQ8KzfDzjCeH
# gaLkMjxJSuJZMpm4UU7DBzDGEGcEBCGeNyFt37BSqqPPpX55CcFhj++d8vqTiwpF
# YzmTNd/znxcZTw6OJN9sQZohh+NeS86CVZ3x31HD3dXifhRf17jbh7NoIyi+0ZCb
# N+mytOH5BXsD+ddwbk+yMaxXV43Fgz7ThG5tB1tjhhNtLZHDA5ezFvGZ5F/FJrqE
# xAbjOhz5MC+RcOVNSzQJCULNqFpfE6Gqeys6btEDm/ltf4LpAe6W1HYuv8BJc19T
# UsqGK2yKAuQX8GErYxJ1zqZCttVrgpsmXFYTC5iGbxC84mvsF0Iti96IdXz9gfzN
# Vlb2OxoefcOwVqIhbkvTZW0ZwYGGDDPAYhLMfr5lSuRqj123OOo=
# =cViP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Jul 2024 01:16:37 AM AEST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240723-1' of https://github.com/legoater/qemu:
vfio/common: Allow disabling device dirty page tracking
vfio/migration: Don't block migration device dirty tracking is unsupported
vfio/iommufd: Implement VFIOIOMMUClass::query_dirty_bitmap support
vfio/iommufd: Implement VFIOIOMMUClass::set_dirty_tracking support
vfio/iommufd: Probe and request hwpt dirty tracking capability
vfio/{iommufd, container}: Invoke HostIOMMUDevice::realize() during attach_device()
vfio/iommufd: Add hw_caps field to HostIOMMUDeviceCaps
vfio/{iommufd,container}: Remove caps::aw_bits
vfio/iommufd: Introduce auto domain creation
vfio/ccw: Don't initialize HOST_IOMMU_DEVICE with mdev
vfio/ap: Don't initialize HOST_IOMMU_DEVICE with mdev
vfio/iommufd: Return errno in iommufd_cdev_attach_ioas_hwpt()
backends/iommufd: Extend iommufd_backend_get_device_info() to fetch HW capabilities
vfio/iommufd: Don't initialize nor set a HOST_IOMMU_DEVICE with mdev
vfio/pci: Extract mdev check into an helper
hw/vfio/container: Fix SIGSEV on vfio_container_instance_finalize()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hpet: emulation improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
=00mB
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: support for reading RAPL MSRs using a helper program
* hpet: emulation improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
# qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
# Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
# jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
# jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
# 3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
# =00mB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 03:19:58 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
hpet: avoid timer storms on periodic timers
hpet: store full 64-bit target value of the counter
hpet: accept 64-bit reads and writes
hpet: place read-only bits directly in "new_val"
hpet: remove unnecessary variable "index"
hpet: ignore high bits of comparator in 32-bit mode
hpet: fix and cleanup persistence of interrupt status
Add support for RAPL MSRs in KVM/Qemu
tools: build qemu-vmsr-helper
qio: add support for SO_PEERCRED for socket channel
target/i386: do not crash if microvm guest uses SGX CPUID leaves
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
=k8e9
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the fifo8_drop() helper for clarity.
It is a simple wrapper over fifo8_pop_buf().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-8-philmd@linaro.org>
Extract fifo8_pop_buf() from hw/scsi/esp.c and expose
it as part of the <qemu/fifo8.h> API. This function takes
care of non-contiguous (wrapped) FIFO buffer (which is an
implementation detail).
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-7-philmd@linaro.org>
Since fifo8_pop_buf() return a const buffer (which points
directly into the FIFO backing store). Rename it using the
'bufptr' suffix to better reflect that it is a pointer to
the internal buffer that is being returned. This will help
differentiate with methods *copying* the FIFO data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-6-philmd@linaro.org>
Since fifo8_peek_buf() return a const buffer (which points
directly into the FIFO backing store). Rename it using the
'bufptr' suffix to better reflect that it is a pointer to
the internal buffer that is being returned. This will help
differentiate with methods *copying* the FIFO data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-5-philmd@linaro.org>
Rather than using address_space_rw(..., 0 or 1),
use the simpler DMA memory API which expand to
the same code. This allows removing a cast on
the 'buf' variable which is really const. Since
'buf' is only used in the CMD_READ_BUFFER case,
we can reduce its scope.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240723181850.46000-1-philmd@linaro.org>
According to the comment in qapi/error.h, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
In nubus_virtio_mmio_realize(), @errp is dereferenced without
ERRP_GUARD().
Although nubus_virtio_mmio_realize() - as a DeviceClass.realize()
method - is never passed a null @errp argument, it should follow the
rules on @errp usage. Add the ERRP_GUARD() there.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240723161802.1377985-1-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
use ranges_overlap() instead of open-coding the overlap check to improve
the readability of the code.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240722040742.11513-5-yaoxt.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The type of kernel_entry, kernel_low and kernel_high is uint64_t, cast
the pointer of this type to uint64_t* is useless.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240722091728.4334-2-yaoxt.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The last register of this device is at offset 0x14 occupying 8 bits so
to cover it the mmio region needs to be 0x15 bytes long. Also correct
the name of the field storing this register value to match the
register name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Fixes: 7abb479c7a ("PPC: E500: Add FSL I2C controller")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240721225506.B32704E6039@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-20-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. Replace
the type_init() / type_register_static() combination.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-2-philmd@linaro.org>
Once initialised, QOM objects can be realized and
unrealized multiple times before being finalized.
Resources allocated in REALIZE must be deallocated
in an equivalent UNREALIZE handler.
Free the CPU array in loongson_ipi_unrealize()
instead of loongson_ipi_finalize().
Cc: qemu-stable@nongnu.org
Fixes: 5e90b8db38 ("hw/loongarch: Set iocsr address space per-board rather than percpu")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240723111405.14208-3-philmd@linaro.org>
Loongson IPI is only available in little-endian,
so use that to access the guest memory (in case
we run on a big-endian host).
Cc: qemu-stable@nongnu.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Fixes: f6783e3438 ("hw/loongarch: Add LoongArch ipi interrupt support")
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-3-philmd@linaro.org>
This piece of code can be shared by both IOTLB invalidation and
PASID-based IOTLB invalidation
No functional changes intended.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-ID: <20240718081636.879544-12-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The property 'x-pre-copy-dirty-page-tracking' allows disabling the whole
tracking of VF pre-copy phase of dirty page tracking, though it means
that it will only be used at the start of the switchover phase.
Add an option that disables the VF dirty page tracking, and fall
back into container-based dirty page tracking. This also allows to
use IOMMU dirty tracking even on VFs with their own dirty
tracker scheme.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
By default VFIO migration is set to auto, which will support live
migration if the migration capability is set *and* also dirty page
tracking is supported.
For testing purposes one can force enable without dirty page tracking
via enable-migration=on, but that option is generally left for testing
purposes.
So starting with IOMMU dirty tracking it can use to accommodate the lack of
VF dirty page tracking allowing us to minimize the VF requirements for
migration and thus enabling migration by default for those too.
While at it change the error messages to mention IOMMU dirty tracking as
well.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[ clg: - spelling in commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
ioctl(iommufd, IOMMU_HWPT_GET_DIRTY_BITMAP, arg) is the UAPI
that fetches the bitmap that tells what was dirty in an IOVA
range.
A single bitmap is allocated and used across all the hwpts
sharing an IOAS which is then used in log_sync() to set Qemu
global bitmaps.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_SET_DIRTY_TRACKING, arg) is the UAPI that
enables or disables dirty page tracking. The ioctl is used if the hwpt
has been created with dirty tracking supported domain (stored in
hwpt::flags) and it is called on the whole list of iommu domains.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to using the dirty tracking UAPI, probe whether the IOMMU
supports dirty tracking. This is done via the data stored in
hiod::caps::hw_caps initialized from GET_HW_INFO.
Qemu doesn't know if VF dirty tracking is supported when allocating
hardware pagetable in iommufd_cdev_autodomains_get(). This is because
VFIODevice migration state hasn't been initialized *yet* hence it can't pick
between VF dirty tracking vs IOMMU dirty tracking. So, if IOMMU supports
dirty tracking it always creates HWPTs with IOMMU_HWPT_ALLOC_DIRTY_TRACKING
even if later on VFIOMigration decides to use VF dirty tracking instead.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Fixed vbasedev->iommu_dirty_tracking assignment in
iommufd_cdev_autodomains_get()
- Added warning for heterogeneous dirty page tracking support
in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Move the HostIOMMUDevice::realize() to be invoked during the attach of the device
before we allocate IOMMUFD hardware pagetable objects (HWPT). This allows the use
of the hw_caps obtained by IOMMU_GET_HW_INFO that essentially tell if the IOMMU
behind the device supports dirty tracking.
Note: The HostIOMMUDevice data from legacy backend is static and doesn't
need any information from the (type1-iommu) backend to be initialized.
In contrast however, the IOMMUFD HostIOMMUDevice data requires the
iommufd FD to be connected and having a devid to be able to successfully
GET_HW_INFO. This means vfio_device_hiod_realize() is called in
different places within the backend .attach_device() implementation.
Suggested-by: Cédric Le Goater <clg@redhat.cm>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Fixed error handling in iommufd_cdev_attach() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Store the value of @caps returned by iommufd_backend_get_device_info()
in a new field HostIOMMUDeviceCaps::hw_caps. Right now the only value is
whether device IOMMU supports dirty tracking (IOMMU_HW_CAP_DIRTY_TRACKING).
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Remove caps::aw_bits which requires the bcontainer::iova_ranges being
initialized after device is actually attached. Instead defer that to
.get_cap() and call vfio_device_get_aw_bits() directly.
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There's generally two modes of operation for IOMMUFD:
1) The simple user API which intends to perform relatively simple things
with IOMMUs e.g. DPDK. The process generally creates an IOAS and attaches
to VFIO and mainly performs IOAS_MAP and UNMAP.
2) The native IOMMUFD API where you have fine grained control of the
IOMMU domain and model it accordingly. This is where most new feature
are being steered to.
For dirty tracking 2) is required, as it needs to ensure that
the stage-2/parent IOMMU domain will only attach devices
that support dirty tracking (so far it is all homogeneous in x86, likely
not the case for smmuv3). Such invariant on dirty tracking provides a
useful guarantee to VMMs that will refuse incompatible device
attachments for IOMMU domains.
Dirty tracking insurance is enforced via HWPT_ALLOC, which is
responsible for creating an IOMMU domain. This is contrast to the
'simple API' where the IOMMU domain is created by IOMMUFD automatically
when it attaches to VFIO (usually referred as autodomains) but it has
the needed handling for mdevs.
To support dirty tracking with the advanced IOMMUFD API, it needs
similar logic, where IOMMU domains are created and devices attached to
compatible domains. Essentially mimicking kernel
iommufd_device_auto_get_domain(). With mdevs given there's no IOMMU domain
it falls back to IOAS attach.
The auto domain logic allows different IOMMU domains to be created when
DMA dirty tracking is not desired (and VF can provide it), and others where
it is. Here it is not used in this way given how VFIODevice migration
state is initialized after the device attachment. But such mixed mode of
IOMMU dirty tracking + device dirty tracking is an improvement that can
be added on. Keep the 'all of nothing' of type1 approach that we have
been using so far between container vs device dirty tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
[ clg: Added ERRP_GUARD() in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info,
it fails the entire provisioning of the guest. Fix that by setting
vbasedev->mdev true so skipping HostIOMMUDevice initialization in the
presence of mdevs.
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info,
it fails the entire provisioning of the guest. Fix that by setting
vbasedev->mdev true so skipping HostIOMMUDevice initialization in the
presence of mdevs.
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to implement auto domains have the attach function
return the errno it got during domain attach instead of a bool.
-EINVAL is tracked to track domain incompatibilities, and decide whether
to create a new IOMMU domain.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
The helper will be able to fetch vendor agnostic IOMMU capabilities
supported both by hardware and software. Right now it is only iommu dirty
tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info, it
fails the entire provisioning of the guest. Fix that by skipping
HostIOMMUDevice initialization in the presence of mdevs, and skip setting
an iommu device when it is known to be an mdev.
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
In preparation to skip initialization of the HostIOMMUDevice for mdev,
extract the checks that validate if a device is an mdev into helpers.
A vfio_device_is_mdev() is created, and subsystems consult VFIODevice::mdev
to check if it's mdev or not.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In vfio_connect_container's error path, the base container is
removed twice form the VFIOAddressSpace QLIST: first on the
listener_release_exit label and second, on free_container_exit
label, through object_unref(container), which calls
vfio_container_instance_finalize().
Let's remove the first instance.
Fixes: 938026053f ("vfio/container: Switch to QOM")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, PCI link devices (PNP0C0F) are always created within the
scope of the PCI root bridge. However, RISC-V needs these link devices
to be created outside to ensure the probing order in the OS. This
matches the example given in the ACPI specification [1] as well. Hence,
create these link devices directly under _SB instead of under the PCI
root bridge.
To keep these link device names unique for multiple PCI bridges, change
the device name from GSIx to LXXY format where XX is the PCI bus number
and Y is the INTx.
GPEX is currently used by riscv, aarch64/virt and x86/microvm machines.
So, this change will alter the DSDT for those systems.
[1] - ACPI 5.1: 6.2.13.1 Example: Using _PRT to Describe PCI IRQ Routing
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The requirement ACPI_060 in the RISC-V BRS specification [1], requires
NS16550 compatible UART to have the HID RSCV0003. So, update the HID for
the UART.
[1] - https://github.com/riscv-non-isa/riscv-brs/releases/download/v0.0.2/riscv-brs-spec.pdf
(Chapter 6)
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-3-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per the requirement ACPI_080 in the RISC-V Boot and Runtime Services
(BRS) specification [1], PLIC and APLIC should be in namespace as well.
So, add them using the defined HID.
[1] - https://github.com/riscv-non-isa/riscv-brs/releases/download/v0.0.2/riscv-brs-spec.pdf
(Chapter 6)
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-2-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a trace point on virtio_iommu_detach_endpoint_from_domain().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-7-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trace when VFIO gets notified about the deletion of an IOMMU MR.
Also trace the name of the region in the add_iommu trace message.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-6-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently miss the removal of the endpoint in case of detach.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-5-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are currently missing the deallocation of the [host_]resv_regions
in case of hot unplug. Also to make things more simple let's rule
out the case where multiple HostIOMMUDevices would be aliased and
attached to the same IOMMUDevice. This allows to remove the handling
of conflicting Host reserved regions. Anyway this is not properly
supported at guest kernel level. On hotunplug the reserved regions
are reset to the ones set by virtio-iommu property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-4-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have switched to PCIIOMMUOps to convey host IOMMU information,
the host reserved regions are transmitted when the PCIe topology is
built. This happens way before the virtio-iommu driver calls the probe
request. So let's remove the probe_done flag that allowed to check
the probe was not done before the IOMMU MR got enabled. Besides this
probe_done flag had a flaw wrt migration since it was not saved/restored.
The only case at risk is if 2 devices were plugged to a
PCIe to PCI bridge and thus aliased. First of all we
discovered in the past this case was not properly supported for
neither SMMU nor virtio-iommu on guest kernel side: see
[RFC] virtio-iommu: Take into account possible aliasing in virtio_iommu_mr()
https://lore.kernel.org/all/20230116124709.793084-1-eric.auger@redhat.com/
If this were supported by the guest kernel, it is unclear what the call
sequence would be from a virtio-iommu driver point of view.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-3-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 1b889d6e39.
There are different problems with that tentative fix:
- Some resources are left dangling (resv_regions,
host_resv_ranges) and memory subregions are left attached to
the root MR although freed as embedded in the sdev IOMMUDevice.
Finally the sdev->as is not destroyed and associated listeners
are left.
- Even when fixing the above we observe a memory corruption
associated with the deallocation of the IOMMUDevice. This can
be observed when a VFIO device is hotplugged, hot-unplugged
and a system reset is issued. At this stage we have not been
able to identify the root cause (IOMMU MR or as structs beeing
overwritten and used later on?).
- Another issue is HostIOMMUDevice are indexed by non aliased
BDF whereas the IOMMUDevice is indexed by aliased BDF - yes the
current naming is really misleading -. Given the state of the
code I don't think the virtio-iommu device works in non
singleton group case though.
So let's revert the patch for now. This means the IOMMU MR/as survive
the hotunplug. This is what is done in the intel_iommu for instance.
It does not sound very logical to keep those but currently there is
no symetric function to pci_device_iommu_address_space().
probe_done issue will be handled in a subsequent patch. Also
resv_regions and host_resv_regions will be deallocated separately.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-2-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add common function to help unregister the GDB register space. This shall be
done in context to the CPU unrealization.
Note: These are common functions exported to arch specific code. For example,
for ARM this code is being referred in associated arch specific patch-set:
Link: https://lore.kernel.org/qemu-devel/20230926103654.34424-1-salil.mehta@huawei.com/
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-8-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPUs Control device(\\_SB.PCI0) register interface for the x86 arch is IO port
based and existing CPUs AML code assumes _CRS objects would evaluate to a system
resource which describes IO Port address. But on ARM arch CPUs control
device(\\_SB.PRES) register interface is memory-mapped hence _CRS object should
evaluate to system resource which describes memory-mapped base address. Update
build CPUs AML function to accept both IO/MEMORY region spaces and accordingly
update the _CRS object.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually
results in start of the CPU scan. Scan figures out the CPU and the kind of
event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT
method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN)
Architecture specific code [1] might initialize its CPUs AML code by calling
common function build_cpus_aml() like below for ARM:
build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base,
"\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY);
[1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
CPU ctrl-dev MMIO region length could be used in ACPI GED and various other
architecture specific places. Move ACPI_CPU_HOTPLUG_REG_LEN macro to more
appropriate common header file.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-3-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU describes initial[1] RAM* in SMBIOS as a series of
virtual DIMMs (capped at 16Gb max) using type 17 structure entries.
Which is fine for the most cases. However when starting guest
with terabytes of RAM this leads to too many memory device
structures, which eventually upsets linux kernel as it reserves
only 64K for these entries and when that border is crossed out
it runs out of reserved memory.
Instead of partitioning initial RAM on 16Gb DIMMs, use maximum
possible chunk size that SMBIOS spec allows[2]. Which lets
encode RAM in lower 31 bits of 32bit field (which amounts upto
2047Tb per DIMM).
As result initial RAM will generate only one type 17 structure
until host/guest reach ability to use more RAM in the future.
Compat changes:
We can't unconditionally change chunk size as it will break
QEMU<->guest ABI (and migration). Thus introduce a new machine
class field that would let older versioned machines to use
legacy 16Gb chunks, while new(er) machine type[s] use maximum
possible chunk size.
PS:
While it might seem to be risky to rise max entry size this large
(much beyond of what current physical RAM modules support),
I'd not expect it causing much issues, modulo uncovering bugs
in software running within guest. And those should be fixed
on guest side to handle SMBIOS spec properly, especially if
guest is expected to support so huge RAM configs.
In worst case, QEMU can reduce chunk size later if we would
care enough about introducing a workaround for some 'unfixable'
guest OS, either by fixing up the next machine type or
giving users a CLI option to customize it.
1) Initial RAM - is RAM configured with help '-m SIZE' CLI option/
implicitly defined by machine. It doesn't include memory
configured with help of '-device' option[s] (pcdimm,nvdimm,...)
2) SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size
PS:
* tested on 8Tb host with RHEL6 guest, which seems to parse
type 17 SMBIOS table entries correctly (according to 'dmidecode').
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240715122417.4059293-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A virtio-net device can be added as a SR-IOV VF to another virtio-pci
device that will be the PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-7-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to attach SR-IOV VF to a virtio-pci PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-6-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-5-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SR-IOV requires PCI Express.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-4-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device cannot be a SR-IOV PF and a VF at the same time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-3-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_config_get_bar_addr() had a division by vf_stride. vf_stride needs
to be non-zero when there are multiple VFs, but the specification does
not prohibit to make it zero when there is only one VF.
Do not perform the division for the first VF to avoid division by zero.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-2-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the period is set to a value that is too low, there could be no
time left to run the rest of QEMU. Do not trigger interrupts faster
than 1 MHz.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the full 64-bit value at which the timer should fire.
This makes it possible to skip the imprecise hpet_calculate_diff()
step, and to remove the clamping of the period to 31 or 63 bits.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Declare the MemoryRegionOps so that 64-bit reads and writes to the HPET
are received directly. This makes it possible to unify the code to
process low and high parts: for 32-bit reads, extract the desired word;
for 32-bit writes, just merge the desired part into the old value and
proceed as with a 64-bit write.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable "val" is used for two different purposes. As an intermediate
value when writing configuration registers, and to store the cleared bits
when writing ISR.
Use "new_val" for the former, and rename the variable so that it is clearer
for the latter case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several bugs in the handling of the ISR register:
- switching level->edge was not lowering the interrupt and
clearing ISR
- switching on the enable bit was not raising a level-triggered
interrupt if the timer had fired
- the timer must be kept running even if not enabled, in
order to set the ISR flag, so writes to HPET_TN_CFG must
not call hpet_del_timer()
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The type of req->cmd is NvmeCmd, cast the pointer of this type to
NvmeCmd* is useless.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Abort was not implemented previously, but we can implement it for AERs
and asynchrnously for I/O.
Signed-off-by: Ayush Mishra <ayush.m55@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Extend copy command to copy user data across different namespaces via
support for specifying a namespace for each source range
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
"make check SPEED=slow" is currently failing the device-introspect-test on
older machine types since introspecting "scsi-block" is causing an abort:
$ ./qemu-system-x86_64 -M pc-q35-8.0 -monitor stdio
QEMU 9.0.50 monitor - type 'help' for more information
(qemu) device_add scsi-block,help
Unexpected error in object_property_find_err() at
../../devel/qemu/qom/object.c:1357:
can't apply global scsi-disk-base.migrate-emulated-scsi-request=false:
Property 'scsi-block.migrate-emulated-scsi-request' not found
Aborted (core dumped)
The problem is that the compat code tries to change the
"migrate-emulated-scsi-request" property for all devices that are
derived from "scsi-block", but the property has only been added
to "scsi-hd" and "scsi-cd" via the DEFINE_SCSI_DISK_PROPERTIES macro.
Thus let's fix the problem by only changing the property on the devices
that really have this property.
Fixes: b4912afa5f ("scsi-disk: Fix crash for VM configured with USB CDROM after live migration")
Message-ID: <20240703090904.909720-1-thuth@redhat.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sgx_epc_get_section assumes a PC platform is in use:
bool sgx_epc_get_section(int section_nr, uint64_t *addr, uint64_t *size)
{
PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
However, sgx_epc_get_section is called by CPUID regardless of whether
SGX state has been initialized or which platform is in use. Check
whether the machine has the right QOM class and if not behave as if
there are no EPC sections.
Fixes: 1dec2e1f19 ("i386: Update SGX CPUID info according to hardware/KVM/user input", 2021-09-30)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2142
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocated memory to hold LBA ranges leaks in the nvme_dsm function. This
happens because the allocated memory for iocb->range is not freed in all
error handling paths.
Fix this by adding a free to ensure that the allocated memory is properly freed.
ASAN log:
==3075137==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 480 byte(s) in 6 object(s) allocated from:
#0 0x55f1f8a0eddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7f531e0f6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x55f1faf1f091 in blk_aio_get block/block-backend.c:2583:12
#3 0x55f1f945c74b in nvme_dsm hw/nvme/ctrl.c:2609:30
#4 0x55f1f945831b in nvme_io_cmd hw/nvme/ctrl.c:4470:16
#5 0x55f1f94561b7 in nvme_process_sq hw/nvme/ctrl.c:7039:29
Cc: qemu-stable@nongnu.org
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since commit e8a2db94 "virtio-gpu-virgl: teach it to get the QEMU EGL
display", virtio-gl depends on ui-opengl symbol "qemu_egl_display".
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2391
Fixes: e8a2db94 ("virtio-gpu-virgl: teach it to get the QEMU EGL display")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost
devices.
The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these
devices ensures that the backend is capable of offering and providing
support for this feature, and that it can be disabled if the backend
does not support it.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_flush operation.
The goal of the virtqueue_ordered_flush operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to write elements to
the used/descriptor ring in-order and then update used_idx.
The function iterates through the VirtQueueElement used_elems array
in-order starting at vq->used_idx. If the element is valid (filled), the
element is written to the used/descriptor ring. This process continues
until we find an invalid (not filled) element.
For packed VQs, the first entry (at vq->used_idx) is written to the
descriptor ring last so the guest doesn't see any invalid descriptors.
If any elements were written, the used_idx is updated.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_fill operation.
The goal of the virtqueue_ordered_fill operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to search for this
now-used element, set its length, and mark the element as filled in
the VirtQueue's used_elems array.
By marking the element as filled, it will indicate that this element has
been processed and is ready to be flushed, so long as the element is
in-order.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support in virtqueue_split_pop and
virtqueue_packed_pop.
VirtQueueElements popped from the available/descritpor ring are added to
the VirtQueue's used_elems array in-order and in the same fashion as
they would be added the used and descriptor rings, respectively.
This will allow us to keep track of the current order, what elements
have been written, as well as an element's essential data after being
processed.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'level' field in vtd_iotlb_key is an unsigned integer.
We don't need to store level as an int in vtd_lookup_iotlb.
This is not an issue by itself, but using unsigned here seems cleaner.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per the below code, it can overflow as am can be larger than 8 according
to the CH 6.5.2.3 IOTLB Invalidate. Use uint64_t to avoid overflows.
Fixes: b5a280c008 ("intel-iommu: add IOTLB using hash table")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These 2 macros are for high 64-bit of the FRCD registers.
Declarations have to be moved accordingly.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When setting the parameters of a PCM stream, we compute the bit flag
with the format and rate values as shift operand to check if they are
set in supported_formats and supported_rates.
If the guest provides a format/rate value which when shifting 1 results
in a value bigger than the number of bits in
supported_formats/supported_rates, we must report an error.
Previously, this ended up triggering the not reached assertions later
when converting to internal QEMU values.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2416
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2416-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When reading input audio in the virtio-snd input callback,
virtio_snd_pcm_in_cb(), we do not check whether the iov can actually fit
the data buffer. This is because we use the buffer->size field as a
total-so-far accumulator instead of byte-size-left like in TX buffers.
This triggers an out of bounds write if the size of the virtio queue
element is equal to virtio_snd_pcm_status, which makes the available
space for audio data zero. This commit adds a check for reaching the
maximum buffer size before attempting any writes.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2427
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2427-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar protection to that provided for -numa memdev=x
to make sure that memory used to back a type3 device is not also mapped
as normal RAM, or for multiple type3 devices.
This is an easy footgun to remove and seems multiple people have
run into it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, if the function fails during the key_len check, the op_code
does not have a proper value, causing virtio_crypto_free_create_session_req
not to free the memory correctly, leading to a memory leak.
By setting the op_code before performing any checks, we ensure that
virtio_crypto_free_create_session_req has the correct context to
perform cleanup operations properly, thus preventing memory leaks.
ASAN log:
==3055068==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x5586a75e6ddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7fb6b63b6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x5586a864bbde in virtio_crypto_handle_ctrl hw/virtio/virtio-crypto.c:407:19
#3 0x5586a94fc84c in virtio_queue_notify_vq hw/virtio/virtio.c:2277:9
#4 0x5586a94fc0a2 in virtio_queue_host_notifier_read hw/virtio/virtio.c:3641:9
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-Id: <20240702211835.3064505-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
And firmware required to set the offset of pool buffer
by writing "Function Control Register(I2CD 00)"
To make this model more readable, will change to introduce
a new bus pool buffer attribute in AspeedI2Cbus.
So, it does not need to calculate the pool buffer offset
for different I2C bus.
This patch rename the I2C class pool attribute to share_pool.
It make user more understand share pool and bus pool
are different.
Incrementing the version of aspeed_i2c_vmstate to 3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
an I2C controller owns 8KB of register space for AST2700,
owns 4KB of register space for AST2600, AST2500 and AST2400,
and owns 64KB of register space for AST1030.
It set the memory region size 4KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the I2C controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Add ADC model for AST2700 ADC support.
The ADC controller registers base address is start at
0x14C0_0000 and its address space is 0x1000.
The ADC controller interrupt is connected to
GICINT130_INTC group at bit 16. The GIC IRQ is 130.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 and AST2600 ADC controllers are identical.
Introduce ast2700 class and set 2 engines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The default behavior of some Aspeed machines is to boot from the eMMC
device, like the rainier-bmc. Others like ast2600-evb could also boot
from eMMC if the HW strapping boot-from-eMMC bit was set. Add a
property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc
machines for which eMMC images are available or can be built.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To change default behavior of a machine and boot from eMMC, future
changes will add a machine option to let the user configure the
boot-from-eMMC HW strapping bit. Add a new machine attribute first.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This value is taken from a running Rainier machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config'
property to set the boot config register to boot from the first boot
area partition of the eMMC device. Also set the boot partition size
of the device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The first boot area partition (64K) of the eMMC device should contain
an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC
device is available to boot from but no flash device is.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QEMU device model representing the eMMC device of the machine is
currently created with type SD_CARD. Change the type to EMMC now that
it is available.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity reports a possible integer overflow because routine
aspeeed_smc_hclk_divisor() has a codepath returning 0, which could
lead to an integer overflow when computing variable 'hclk_shift' in
the caller aspeed_smc_dma_calibration().
The value passed to aspeed_smc_hclk_divisor() is always between 0 and
15 and, in this case, there is always a matching hclk divisor. Remove
the return 0 and use g_assert_not_reached() instead.
Fixes: Coverity CID 1547822
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----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=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SMMUv3 OAS is currently hardcoded in the code to 44 bits, for nested
configurations that can be a problem, as stage-2 might be shared with
the CPU which might have different PARANGE, and according to SMMU manual
ARM IHI 0070F.b:
6.3.6 SMMU_IDR5, OAS must match the system physical address size.
This patch doesn't change the SMMU OAS, but refactors the code to
make it easier to do that:
- Rely everywhere on IDR5 for reading OAS instead of using the
SMMU_IDR5_OAS macro, so, it is easier just to change IDR5 and
it propagages correctly.
- Add additional checks when OAS is greater than 48bits.
- Remove unused functions/macros: pa_range/MAX_PA.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-19-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is in place, consolidate parsing of STE cfg and setting
translation stage.
Advertise nesting if stage requested is "nested".
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-18-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, to check if faults are enabled, it was sufficient to check
the current stage of translation and check the corresponding
record_faults flag.
However, with nesting, it is possible for stage-1 (nested) translation
to trigger a stage-2 fault, so we check SMMUPTWEventInfo as it would
have the correct stage set from the page table walk.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-17-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IOMMUTLBEvent only understands IOVA, for stage-1 or stage-2
SMMU instances we consider the input address as the IOVA, but when
nesting is used, we can't mix stage-1 and stage-2 addresses, so for
nesting only stage-1 is considered the IOVA and would be notified.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-16-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch, combine_tlb() will be added which combines 2 TLB
entries into one for nested translations, which chooses the granule
and level from the smallest entry.
This means that with nested translation, an entry can be cached with
the granule of stage-2 and not stage-1.
However, currently, the lookup for an IOVA is done with input stage
granule, which is stage-1 for nested configuration, which will not
work with the above logic.
This patch reworks lookup in that case, so it falls back to stage-2
granule if no entry is found using stage-1 granule.
Also, drop aligning the iova to avoid over-aligning in case the iova
is cached with a smaller granule, the TLB lookup will align the iova
anyway for each granule and level, and the page table walker doesn't
consider the page offset bits.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARM SMMU architecture specification (ARM IHI 0070 F.b),
In "5.2 Stream Table Entry":
[51:6] S1ContextPtr
If Config[1] == 1 (stage 2 enabled), this pointer is an IPA translated by
stage 2 and the programmed value must be within the range of the IAS.
In "5.4.1 CD notes":
The translation table walks performed from TTB0 or TTB1 are always performed
in IPA space if stage 2 translations are enabled.
This patch implements translation of the S1 context descriptor pointer and
TTBx base addresses through the S2 stage (IPA -> PA)
smmuv3_do_translate() is updated to have one arg which is translation
class, this is useful to:
- Decide wether a translation is stage-2 only or use the STE config.
- Populate the class in case of faults, WALK_EABT is left unchanged
for stage-1 as it is always IN, while stage-2 would match the
used class (TT, IN, CD), this will change slightly when the ptw
supports nested translation as it can also issue TT event with
class IN.
In case for stage-2 only translation, used in the context of nested
translation, the stage and asid are saved and restored before and
after calling smmu_translate().
Translating CD or TTBx can fail for the following reasons:
1) Large address size: This is described in
(3.4.3 Address sizes of SMMU-originated accesses)
- For CD ptr larger than IAS, for SMMUv3.1, it can trigger either
C_BAD_STE or Translation fault, we implement the latter as it
requires no extra code.
- For TTBx, if larger than the effective stage 1 output address size, it
triggers C_BAD_CD.
2) Faults from PTWs (7.3 Event records)
- F_ADDR_SIZE: large address size after first level causes stage 2 Address
Size fault (Also in 3.4.3 Address sizes of SMMU-originated accesses)
- F_PERMISSION: Same as an address translation. However, when
CLASS == CD, the access is implicitly Data and a read.
- F_ACCESS: Same as an address translation.
- F_TRANSLATION: Same as an address translation.
- F_WALK_EABT: Same as an address translation.
These are already implemented in the PTW logic, so no extra handling
required.
As in CD and TTBx translation context, the iova is not known, setting
the InputAddr was removed from "smmuv3_do_translate" and set after
from "smmuv3_translate" with the new function "smmuv3_fixup_event"
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMMUv3 spec (ARM IHI 0070 F.b - 7.3 Event records) defines the
class of events faults as:
CLASS: The class of the operation that caused the fault:
- 0b00: CD, CD fetch.
- 0b01: TTD, Stage 1 translation table fetch.
- 0b10: IN, Input address
However, this value was not set and left as 0 which means CD and not
IN (0b10).
Another problem was that stage-2 class is considered IN not TT for
EABT, according to the spec:
Translation of an IPA after successful stage 1 translation (or,
in stage 2-only configuration, an input IPA)
- S2 == 1 (stage 2), CLASS == IN (Input to stage)
This would change soon when nested translations are supported.
While at it, add an enum for class as it would be used for nesting.
However, at the moment stage-1 and stage-2 use the same class values,
except for EABT.
Fixes: 9bde7f0674 “hw/arm/smmuv3: Implement translate callback”
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240715084519.1189624-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the following events (ARM IHI 0070 F.b - 7.3 Event records):
- F_TRANSLATION
- F_ACCESS
- F_PERMISSION
- F_ADDR_SIZE
If fault occurs at stage 2, S2 == 1 and:
- If translating an IPA for a transaction (whether by input to
stage 2-only configuration, or after successful stage 1 translation),
CLASS == IN, and IPA is provided.
At the moment only CLASS == IN is used which indicates input
translation.
However, this was not implemented correctly, as for stage 2, the code
only sets the S2 bit but not the IPA.
This field has the same bits as FetchAddr in F_WALK_EABT which is
populated correctly, so we don’t change that.
The setting of this field should be done from the walker as the IPA address
wouldn't be known in case of nesting.
For stage 1, the spec says:
If fault occurs at stage 1, S2 == 0 and:
CLASS == IN, IPA is UNKNOWN.
So, no need to set it to for stage 1, as ptw_info is initialised by zero in
smmuv3_translate().
Fixes: e703f7076a “hw/arm/smmuv3: Add page table walk for stage-2”
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-3-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the SMMU architecture specification (ARM IHI 0070 F.b),
in “3.4 Address sizes”
The address output from the translation causes a stage 1 Address Size
fault if it exceeds the range of the effective IPA size for the given CD.
However, this check was missing.
There is already a similar check for stage-2 against effective PA.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-2-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is common practice when implementing double-buffering on VideoCore
to do so by multiplying the height of the virtual buffer by the
number of virtual screens desired (i.e., two - in the case of
double-bufferring).
At present, this won't work in QEMU because the logic in
fb_use_offsets require that both the virtual width and height exceed
their physical counterparts.
This appears to be unintentional/a typo and indeed the comment
states; "Experimentally, the hardware seems to do this only if the
viewport size is larger than the physical screen". The
viewport/virtual size would be larger than the physical size if
either virtual dimension were larger than their physical counterparts
and not necessarily both.
Signed-off-by: SamJakob <me@samjakob.com>
Message-id: 20240713160353.62410-1-me@samjakob.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
=pM6B
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Cédric Le Goater" <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open(). And considering the SGX
enablement description is useful, convert it into a error message hint.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
-----BEGIN PGP SIGNATURE-----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=m52p
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240716' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaWvlEACgkQ4+MsLN6t
# wN7p7hAAj6JV3fIg1iKBR49asQVzU3/nYRIlWnp6QsLRGX+qwjMnuMzlvpinTtq4
# SJZobw1OJp/2LNaEGqAqNHqBpwAPibUnkei0pd1Y+v6Cyywo7X5Y1hRvQf46Ezqm
# u2FxsAfWc4cQs+sFrbNq/v7X2+R6VmChkA+EVc4cB0gwMOjvtg8RQObdhKr7Y6UX
# b9KvRDSNMH75ht39RD/smtcn/kprkkTQYo/ciBbVWdnBMiKuhN0qLXbKnZu9lMs4
# Ru29ypT+98pL1E/4YbgNcLGYXHjKrSIpD3+DEvmWe09LdG2+YMASv7do3iKfAYN5
# KdQ9BNZxYrpmeDAiyL521pODsgvU/wDDdbK0xUztPqcHhpYkvcfYWdzO8wr28Ib0
# wOEA0+xzveeD+1ZKjilbZ6tKzsRrKgv1O8j1T8rXab2/3mjrW2R5G/5y4bpM8E4h
# KuqGwC2YjWsJi3CwRL5Cvu5YBsiyYF7mk0zTKK2qwO87B7Pa0PJ3Y9x0xIWm4blp
# RoZ1SaCChH3M1hKK3jDjrIutXrZG8CzHpe17QjTQeUxo+/wX3VfDYbXasTe1orFu
# +JkUBU+xZ6m1+dWAa22H5KbeY8wd99p6w+ChnVmS15WqVK8i2e4gfTsKGh7Idt3t
# Vf4CaCD/2vRtKo4AN+YNDUg1DWV89zXRbnkR5oWUWG3Fda5Qo3k=
# =m52p
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 04:39:13 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240716' of https://github.com/philmd/qemu:
hw/sd/sdcard: Support boot area in emmc image
hw/sd/sdcard: Add mmc SWITCH function support (CMD6)
hw/sd/sdcard: Add eMMC 'boot-partition-size' property
hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8)
hw/sd/sdcard: Implement eMMC sleep state (CMD5)
hw/sd/sdcard: Add emmc_cmd_PROGRAM_CID handler (CMD26)
hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23)
hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
hw/sd/sdcard: Register unimplemented command handlers
hw/sd/sdcard: Register generic command handlers
hw/sd/sdcard: Basis for eMMC support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
switch operation in mmc cards, updated the ext_csd register to
request changes in card operations. Here we implement similar
sequence but requests are mostly dummy and make no change.
Implement SWITCH_ERROR if the write operation offset goes beyond
length of ext_csd.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Convert to SDProto handlers, add trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-11-philmd@linaro.org>
Avoid hardcoding 1MiB boot size in EXT_CSD_BOOT_MULT,
expose it as 'boot-partition-size' QOM property.
By default, do not use any size. The board is responsible
to set the boot partition size property.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-10-philmd@linaro.org>
The parameters mimick a real 4GB eMMC, but it can be set to various
sizes.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
EXT_CSD values from Vincent's patch simplivied for Spec v4.3:
- Remove deprecated keys:
. EXT_CSD_SEC_ERASE_MULT
. EXT_CSD_SEC_TRIM_MULT
- Set some keys to not defined / implemented:
. EXT_CSD_HPI_FEATURES
. EXT_CSD_BKOPS_SUPPORT
. EXT_CSD_SEC_FEATURE_SUPPORT
. EXT_CSD_ERASE_TIMEOUT_MULT
. EXT_CSD_PART_SWITCH_TIME
. EXT_CSD_OUT_OF_INTERRUPT_TIME
- Simplify:
. EXT_CSD_ACC_SIZE (6 -> 1)
16KB of super_page_size -> 512B (BDRV_SECTOR_SIZE)
. EXT_CSD_HC_ERASE_GRP_SIZE (4 -> 1)
. EXT_CSD_HC_WP_GRP_SIZE (4 -> 1)
. EXT_CSD_S_C_VCC[Q] (8 -> 1)
. EXT_CSD_S_A_TIMEOUT (17 -> 1)
. EXT_CSD_CARD_TYPE (7 -> 3)
Dual data rate -> High-Speed mode
- Update:
. EXT_CSD_CARD_TYPE (7 -> 3)
High-Speed MultiMediaCard @ 26MHz & 52MHz
. Performances (0xa -> 0x46)
Class B at 3MB/s. -> Class J at 21MB/s
. EXT_CSD_REV (5 -> 3)
Rev 1.5 (spec v4.41) -> Rev 1.3 (spec v4.3)
- Use load/store API to set EXT_CSD_SEC_CNT
- Remove R/W keys, normally zeroed at reset
. EXT_CSD_BOOT_INFO
Migrate the Modes segment (192 lower bytes) but not the
full EXT_CSD register, see Spec v4.3, chapter 8.4
"Extended CSD register":
The Extended CSD register defines the card properties
and selected modes. It is 512 bytes long. The most
significant 320 bytes are the Properties segment, which
defines the card capabilities and cannot be modified by
the host. The lower 192 bytes are the Modes segment,
which defines the configuration the card is working in.
These modes can be changed by the host by means of the
SWITCH command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-9-philmd@linaro.org>
The JEDEC standards specifies a sleep state where the eMMC won't
answer any command appart from RESET and WAKEUP and go to low power
state. Implement this state and the corresponding command number 5.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240712162719.88165-7-philmd@linaro.org>
The number of blocks is defined in the lower bits [15:0].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-6-philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-5-philmd@linaro.org>
Per the spec v4.3 these commands are mandatory,
but we don't implement them.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-4-philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-3-philmd@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The transfer size check was originally added to prevent consecutive DMA TI
commands from causing an assert() due to an existing SCSI request being in
progress, but since the last set of updates [*] this is no longer required.
Remove the transfer size check from DMA DATA IN and DATA OUT transfers so
that issuing a DMA TI command when there is no data left to transfer does
not cause an assert() due to an existing SCSI request being in progress.
[*] See commits f3ace75be8..78d68f312a
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2415
Message-ID: <20240713224249.468084-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
load_image_gzipped() does not seem to be used anywhere. Remove it.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240711072448.32673-1-anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Makes the code more comprehensible, matches the datasheet and
the piix4 device model.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240704205854.18537-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The read() syscall is not guaranteed to return all data from a file. The
default ROM loader implementation currently does not take this into account,
instead failing if all bytes are not read at once. This change loads the ROM
using g_file_get_contents() instead, which correctly reads all data using
multiple calls to read() while also returning the loaded ROM size.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628182706.99525-1-gregorhaas1997@gmail.com>
[PMD: Use gsize with g_file_get_contents()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 3787324101 ("hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)",
2009-04-17) applied the fix only to the low 32-bits of the comparator, but
it should be done for the high bits as well. Otherwise, the high 32-bits
of the comparator cannot be written and they remain fixed to 0xffffffff.
Co-developed-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When writing a new period, the clamping should use a maximum value
rather tyhan a bit mask. Also, when writing the high bits new_val
is shifted right by 32, so the maximum allowed period should also
be shifted right.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3089637461 ("scsi: Don't ignore most usb-storage properties")
removed the call to object_property_set_int() and thus the 'set'
method for the bootindex property was also not called anymore. Here
that method is device_set_bootindex() (as configured by
scsi_dev_instance_init() -> device_add_bootindex_property()) which as
a side effect registers the device via add_boot_device_path().
As reported by a downstream user [0], the bootindex property did not
have the desired effect anymore for legacy drives. Fix the regression
by explicitly calling the add_boot_device_path() function after
checking that the bootindex is not yet used (to avoid
add_boot_device_path() calling exit()).
[0]: https://forum.proxmox.com/threads/149772/post-679433
Cc: qemu-stable@nongnu.org
Fixes: 3089637461 ("scsi: Don't ignore most usb-storage properties")
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Link: https://lore.kernel.org/r/20240710152529.1737407-1-f.ebner@proxmox.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9876359990 ("hw/scsi/lsi53c895a: add timer to scripts
processing") reduced the maximum allowed instruction count by
a factor of 100 all the way down to 100.
This causes the "Check Point R81.20 Gaia" appliance [0] to fail to
boot after fully finishing the installation via the appliance's web
interface (there is already one reboot before that).
With a limit of 150, the appliance still fails to boot, while with a
limit of 200, it works. Bump to 500 to fix the regression and be on
the safe side.
Originally reported in the Proxmox community forum[1].
[0]: https://support.checkpoint.com/results/download/124397
[1]: https://forum.proxmox.com/threads/149772/post-683459
Cc: qemu-stable@nongnu.org
Fixes: 9876359990 ("hw/scsi/lsi53c895a: add timer to scripts processing")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Sven Schnelle <svens@stackframe.org>
Link: https://lore.kernel.org/r/20240715131403.223239-1-f.ebner@proxmox.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running qemu-system-aarch64 -M virt -nographic and terminating it will
result in a LeakSanitizer error due to remaining queued CPU work so
free it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20240714-cpu-v1-1-19c2f8de2055@daynix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if the 'legacy-vm-type' property of the sev-guest object is
'on', QEMU will attempt to use the newer KVM_SEV_INIT2 kernel
interface in conjunction with the newer KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM KVM VM types.
This can lead to measurement changes if, for instance, an SEV guest was
created on a host that originally had an older kernel that didn't
support KVM_SEV_INIT2, but is booted on the same host later on after the
host kernel was upgraded.
Instead, if legacy-vm-type is 'off', QEMU should fail if the
KVM_SEV_INIT2 interface is not provided by the current host kernel.
Modify the fallback handling accordingly.
In the future, VMSA features and other flags might be added to QEMU
which will require legacy-vm-type to be 'off' because they will rely
on the newer KVM_SEV_INIT2 interface. It may be difficult to convey to
users what values of legacy-vm-type are compatible with which
features/options, so as part of this rework, switch legacy-vm-type to a
tri-state OnOffAuto option. 'auto' in this case will automatically
switch to using the newer KVM_SEV_INIT2, but only if it is required to
make use of new VMSA features or other options only available via
KVM_SEV_INIT2.
Defining 'auto' in this way would avoid inadvertantly breaking
compatibility with older kernels since it would only be used in cases
where users opt into newer features that are only available via
KVM_SEV_INIT2 and newer kernels, and provide better default behavior
than the legacy-vm-type=off behavior that was previously in place, so
make it the default for 9.1+ machine types.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
cc: kvm@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240710041005.83720-1-michael.roth@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function ufs_is_mcq_reg() and ufs_is_mcq_op_reg() only evaluated
the range of the mcq_reg and mcq_op_reg offset, which is defined as
a constant. Therefore, it was possible for them to return true
even though the ufs device is configured to not support the mcq.
This could cause ufs_mmio_read()/ufs_mmio_write() to result in
Null-pointer-dereference.
So fix it.
Resolves: #2428
Fixes: 5c079578d2 ("hw/ufs: Add support MCQ of UFSHCI 4.0")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZpCKgwAKCRBAov/yOSY+
3yuEBADmzjhomzzTnTHvOTPcK8Ugrru1QY9gT+5m7+I3cdbSRsYxEZLOdnjDAPBJ
aVO+ZOkNFHspOOAo5A55QRC0PA4YGDGMg+ZcB7AVhzbdmra7SKdzMzrrVfYJYpk5
CtcrI+4OPt+U6mh/eTKuaXaWgjuoZ+TOjZqhL+rrpIFjcN78Rw==
=vhZy
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240712' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240712
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZpCKgwAKCRBAov/yOSY+
# 3yuEBADmzjhomzzTnTHvOTPcK8Ugrru1QY9gT+5m7+I3cdbSRsYxEZLOdnjDAPBJ
# aVO+ZOkNFHspOOAo5A55QRC0PA4YGDGMg+ZcB7AVhzbdmra7SKdzMzrrVfYJYpk5
# CtcrI+4OPt+U6mh/eTKuaXaWgjuoZ+TOjZqhL+rrpIFjcN78Rw==
# =vhZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jul 2024 06:44:35 PM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240712' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix cpu_reset set wrong CSR_CRMD
target/loongarch: Set CSR_PRCFG1 and CSR_PRCFG2 values
target/loongarch: Remove avail_64 in trans_srai_w() and simplify it
target/loongarch/kvm: Add software breakpoint support
MAINTAINERS: Add myself as a reviewer of LoongArch virt machine
hw/loongarch/virt: Remove unused assignment
hw/loongarch: Change the tpm support by default
hw/loongarch/boot.c: fix out-of-bound reading
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add devices that support tpm by default,
Fixed incomplete tpm acpi table information.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624032300.999157-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
memcpy() is trying to READ 512 bytes from memory,
pointed by info->kernel_cmdline,
which was (presumable) allocated by g_strdup("");
Found with ASAN, making check with enabled sanitizers.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240628123910.577740-1-frolov@swemel.ru>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This fixes the clobbering of the entry->next pointer when
unmapping the first entry in a bucket of a mapcache.
Fixes: 123acd816d ("xen: mapcache: Unmap first entries in buckets")
Reported-by: Anthony PERARD <anthony.perard@vates.tech>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmaQHpQACgkQTeGvMW1P
DemukQf+Pqcq75cflBqIyVN84/0eThJxmpoTP0ynGNMKJp+K+oecb5pdgTeDI3Kh
esDOjL8m849r5LFjrjmySrTX8znHPFXdBdqCaOp/MZlgz3NML1guB5EYsizZJ+L6
K4IRLE/8gzfZHY4yWGmUBuL1VBs8XZV0bXYYlA0xKlO638O0KgVQ/2YpC/44l93J
rEnefSeXIi+/tCYEaX7t2dA+Qfm/qUrcEZBgvhCREi8t8hTzKGHsl2LVKrsFdA5I
QZtTFcqeoJThtzWmxGKqbfFb/qeirBlCfhvTEmUWXlS1z9VNzy0ZuqA2l0Sy05ls
eARbl+JnvV6ic6PikZd8dMSrILjNkQ==
=dLKH
-----END PGP SIGNATURE-----
Merge tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu into staging
hw/nvme patches
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmaQHpQACgkQTeGvMW1P
# DemukQf+Pqcq75cflBqIyVN84/0eThJxmpoTP0ynGNMKJp+K+oecb5pdgTeDI3Kh
# esDOjL8m849r5LFjrjmySrTX8znHPFXdBdqCaOp/MZlgz3NML1guB5EYsizZJ+L6
# K4IRLE/8gzfZHY4yWGmUBuL1VBs8XZV0bXYYlA0xKlO638O0KgVQ/2YpC/44l93J
# rEnefSeXIi+/tCYEaX7t2dA+Qfm/qUrcEZBgvhCREi8t8hTzKGHsl2LVKrsFdA5I
# QZtTFcqeoJThtzWmxGKqbfFb/qeirBlCfhvTEmUWXlS1z9VNzy0ZuqA2l0Sy05ls
# eARbl+JnvV6ic6PikZd8dMSrILjNkQ==
# =dLKH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jul 2024 11:04:04 AM PDT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu:
hw/nvme: Expand VI/VQ resource to uint32
hw/nvme: Allocate sec-ctrl-list as a dynamic array
hw/nvme: separate identify data for sec. ctrl list
hw/nvme: add Identify Endurance Group List
hw/nvme: fix BAR size mismatch of SR-IOV VF
hw/nvme: fix number of PIDs for FDP RUH update
hw/nvme: Add support for setting the MQES for the NVMe emulation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VI and VQ resources cover queue resources in each VFs in SR-IOV.
Current maximum I/O queue pair size is 0xffff, we can expand them to
cover the full number of I/O queue pairs.
This patch also fixed Identify Secondary Controller List overflow due to
expand of number of secondary controllers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
To prevent further bumping up the number of maximum VF te support, this
patch allocates a dynamic array (NvmeCtrl *)->sec_ctrl_list based on
number of VF supported by sriov_max_vfs property.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Secondary controller list for virtualization has been managed by
Identify Secondary Controller List data structure with NvmeSecCtrlList
where up to 127 secondary controller entries can be managed. The
problem hasn't arisen so far because NVME_MAX_VFS has been 127.
This patch separated identify data itself from the actual secondary
controller list managed by controller to support more than 127 secondary
controllers with the following patch. This patch reused
NvmeSecCtrlEntry structure to manage all the possible secondary
controllers, and copy entries to identify data structure when the
command comes in.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Commit 73064edfb8 ("hw/nvme: flexible data placement emulation")
intorudced NVMe FDP feature to nvme-subsys and nvme-ctrl with a
single endurance group #1 supported. This means that controller should
return proper identify data to host with Identify Endurance Group List
(CNS 19h). But, yes, only just for the endurance group #1. This patch
allows host applications to ask for which endurance group is available
and utilize FDP through that endurance group.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
PF initializes SR-IOV VF BAR0 region in nvme_init_sriov() with bar_size
calcaulted by Primary Controller Capability such as VQFRSM and VIFRSM
rather than `max_ioqpairs` and `msix_qsize` which is for PF only.
In this case, the bar size reported in nvme_init_sriov() by PF and
nvme_init_pci() by VF might differ especially with large number of
sriov_max_vfs (e.g., 127 which is curret maximum number of VFs). And
this reports invalid BAR0 address of VFs to the host operating system
so that MMIO access will not be caught properly and, of course, NVMe
driver initialization is failed.
For example, if we give the following options, BAR size will be
initialized by PF with 4K, but VF will try to allocate 8K BAR0 size in
nvme_init_pci().
#!/bin/bash
nr_vf=$((127))
nr_vq=$(($nr_vf * 2 + 2))
nr_vi=$(($nr_vq / 2 + 1))
nr_ioq=$(($nr_vq + 2))
...
-device nvme,serial=foo,id=nvme0,bus=rp2,subsys=subsys0,mdts=9,msix_qsize=$nr_ioq,max_ioqpairs=$nr_ioq,sriov_max_vfs=$nr_vf,sriov_vq_flexible=$nr_vq,sriov_vi_flexible=$nr_vi \
To fix this issue, this patch modifies the calculation of BAR size in
the PF and VF initialization by using different elements:
PF: `max_ioqpairs + 1` with `msix_qsize`
VF: VQFRSM with VIFRSM
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The number of PIDs is in the upper 16 bits of cdw10. So we need to
right-shift by 16 bits instead of only a single bit.
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Cc: qemu-stable@nongnu.org
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The MQES field in the CAP register describes the Maximum Queue Entries
Supported for the IO queues of an NVMe controller. Adding a +1 to the
value in this field results in the total queue size. A full queue is
when a queue of size N contains N - 1 entries, and the minimum queue
size is 2. Thus the lowest MQES value is 1.
This patch adds the new mqes property to the NVMe emulation which allows
a user to specify the maximum queue size by setting this property. This
is useful as it enables testing of NVMe controller where the MQES is
relatively small. The smallest NVMe queue size supported in NVMe is 2
submission and completion entries, which means that the smallest legal
mqes value is 1.
The following example shows how the mqes can be set for a the NVMe
emulation:
-drive id=nvme0,if=none,file=nvme.img,format=raw
-device nvme,drive=nvme0,serial=foo,mqes=1
If the mqes property is not provided then the default mqes will still be
0x7ff (the queue size is 2048 entries).
Signed-off-by: John Berg <jhnberg@amazon.co.uk>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The USART devices were previously connecting their outbound IRQs
directly to the CPU because the EXTI wasn't handling direct lines
interrupts.
Now the USART connects to the EXTI inbound GPIOs, and the EXTI connects
its IRQs to the CPU.
The existing QTest for the USART (tests/qtest/stm32l4x5_usart-test.c)
checks that USART1_IRQ in the CPU is pending when expected so it
confirms that the connection through the EXTI still works.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous implementation for EXTI interrupts only handled
"configurable" interrupts, like those originating from STM32L4x5 SYSCFG
(the only device currently connected to the EXTI up until now).
In order to connect STM32L4x5 USART to the EXTI, this commit adds
handling for direct interrupts (interrupts without configurable edge).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240707085927.122867-3-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current implementation of bcm2835_thermal_ops sets
impl.max_access_size and valid.min_access_size to 4, but leaves
impl.min_access_size and valid.max_access_size unset, defaulting to 1.
This causes issues when the memory system is presented with an access
of size 2 at an offset of 3, leading to an attempt to synthesize it as
a pair of byte accesses at offsets 3 and 4, which trips an assert.
Additionally, the lack of valid.max_access_size setting causes another
issue: the memory system tries to synthesize a read using a 4-byte
access at offset 3 even though the device doesn't allow unaligned
accesses.
This patch addresses these issues by explicitly setting both
impl.min_access_size and valid.max_access_size to 4, ensuring proper
handling of access sizes.
Error log:
ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Bail out! ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Aborted
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine raspi3b -m 1G -qtest stdio
readw 0x3f212003
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240702154042.3018932-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In pl011_get_baudrate(), when we calculate the baudrate we can
accidentally divide by zero. This happens because although (as the
specification requires) we treat UARTIBRD = 0 as invalid, we aren't
correctly limiting UARTIBRD and UARTFBRD values to the 16-bit and 6-bit
ranges the hardware allows, and so some non-zero values of UARTIBRD can
result in a zero divisor.
Enforce the correct register field widths on guest writes and on inbound
migration to avoid the division by zero.
ASAN log:
==2973125==ERROR: AddressSanitizer: FPE on unknown address 0x55f72629b348
(pc 0x55f72629b348 bp 0x7fffa24d0e00 sp 0x7fffa24d0d60 T0)
#0 0x55f72629b348 in pl011_get_baudrate hw/char/pl011.c:255:17
#1 0x55f726298d94 in pl011_trace_baudrate_change hw/char/pl011.c:260:33
#2 0x55f726296fc8 in pl011_write hw/char/pl011.c:378:9
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine realview-pb-a8 -qtest stdio
writeq 0x1000b024 0xf8000000
EOF
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240702155752.3022007-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The error message is actually expressive, considering QEMU only. But
when called from Libvirt, talking about "size" can be confusing, because
in Libvirt "size" translates to the memory backend size in QEMU (maximum
size) and "current" translates to the QEMU "size" property.
Let's simply avoid talking about the "size" property and spell out that
some device memory is still plugged.
Message-ID: <20240416141426.588544-1-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Liang Cong <lcong@redhat.com>
Cc: Mario Casquero <mcasquer@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
* support AST2700 network
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
=UygB
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu into staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_display_edid_init() can fail for many reasons and return silently.
It would be good to report the error.
Old mdev driver may not support vfio edid region and we allow to go
through in this case.
vfio_display_edid_update() isn't changed because it can be called at
runtime when UI changes (i.e. window resize).
Fixes: 08479114b0 ("vfio/display: add edid support.")
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
EDID related device region info is leaked in vfio_display_edid_init()
error path and VFIODisplay destroying path.
Fixes: 08479114b0 ("vfio/display: add edid support.")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device
assignment"), in case of bypass mode, we transiently enabled the
IOMMU MR to allow the set_page_size_mask() to be called and pass
information about the page size mask constraint of cold plugged
VFIO devices. Now we do not use the IOMMU MR callback anymore, we
can just get rid of this hack.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the Host IOMMU Device page size mask when this latter is set.
This allows to get the information much sooner than when relying on
IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR
gets enabled. We introduce check_page_size_mask() helper whose code
is inherited from current virtio_iommu_set_page_size_mask()
implementation. This callback will be removed in a subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
In case no IOMMUPciBus/IOMMUDevice are found we need to properly
set the error handle and return.
Fixes : Coverity CID 1549006
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
According to the w25q01jv datasheet at page 16,
it is required to set QE bit in "Status Register 2".
Besides, users are able to utilize "Write Status Register 1(0x01)"
command to set QE bit in "Status Register 2" and
utilize "Read Status Register 2(0x35)" command to get the QE bit status.
To support quad mode for w25q01jvq, update collecting data needed
2 bytes for WRSR command in decode_new_cmd function and
verify QE bit at the second byte of collecting data bit 2
in complete_collecting_data.
Update RDCR_EQIO command to set bit 2 of return data
if quad mode enable in decode_new_cmd.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set dma64 property for ftgmac100 model to support
64bits dram address DMA.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "TXDES 2" and "RXDES 2" to save the high part
physical address of packet buffer.
Ex: TX packet buffer address [34:0]
The "TXDES 2" bits [18:16] which corresponds the bits [34:32]
of the 64 bits address of the TX packet buffer address
and "TXDES 3" bits [31:0] which corresponds the bits [31:0]
of the 64 bits address of the TX packet buffer address.
Update TX and RX packet buffers address type to
64 bits for dram 64 bits address DMA support.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In order to keep eMMC model simpler to maintain,
extract common properties and the common code from
class_init to the (internal) TYPE_SDMMC_COMMON.
Update the corresponding QOM cast macros.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-6-philmd@linaro.org>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
So far eMMC will only use sd_sleep_state, but
all all states specified for completeness.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-81-philmd@linaro.org>
Some commands expect less than BLOCK_LENGTH.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-80-philmd@linaro.org>
All read/write on DAT lines are explicitly handled.
Reaching this point would be a programming error:
replace by an assertion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-79-philmd@linaro.org>
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-78-philmd@linaro.org>
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-77-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Handle as RAZ/WI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-3-philmd@linaro.org>
The correct command name is 'SD SEND_OP_COND',
rename accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-4-philmd@linaro.org>
Recent SDHCI expect cards to support the v3.01 spec
to negociate lower I/O voltage. Select it by default.
Versioned machine types with a version of 9.0 or
earlier retain the old default (spec v2.00).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-2-philmd@linaro.org>
Rather than using the obscure 0x4567 magic value,
use a real random one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-5-philmd@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-3-philmd@linaro.org>
Calling qemu_plugin_vcpu_init__async() on the vCPU thread
is a detail of plugins, not relevant to TCG vCPU management.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-30-alex.bennee@linaro.org>
cpu::plugin_state is allocated in cpu_common_initfn() when
the vCPU state is created. Release it in cpu_common_finalize()
when we are done.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-29-alex.bennee@linaro.org>
Really the problem here is the return values of fit_load_[kernel|fdt]() are a
little all over the place. However we don't want to somehow get
through not having set kernel_end and having it just be random unused
data.
The compiler complained on an --enable-gcov build:
In file included from ../../hw/core/loader-fit.c:20:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h: In function ‘load_fit’:
/home/alex/lsrc/qemu.git/include/qemu/osdep.h:486:45: error: ‘kernel_end’ may be used uninitialized [-Werror=maybe-uninitialized]
486 | #define ROUND_UP(n, d) ROUND_DOWN((n) + (d) - 1, (d))
| ^
../../hw/core/loader-fit.c:270:12: note: ‘kernel_end’ was declared here
270 | hwaddr kernel_end;
| ^~~~~~~~~~
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Rikalo <arikalo@gmail.com>
Message-Id: <20240705084047.857176-5-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
romsize is an uint32_t variable. Specifying -1 as an uint32_t value is
obscure way to denote UINT32_MAX.
Worse, if int is wider than 32-bit, it will change the behavior of a
construct like the following:
romsize = -1;
if (romsize != -1) {
...
}
When -1 is assigned to romsize, -1 will be implicitly casted into
uint32_t, resulting in UINT32_MAX. On contrary, when evaluating
romsize != -1, romsize will be casted into int, and it will be a
comparison of UINT32_MAX and -1, and result in false.
Replace -1 with UINT32_MAX for statements involving the variable to
clarify the intent and prevent potential breakage.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240627-reuse-v10-10-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-9-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-8-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Release VFs failed to realize just as we do in unregister_vfs().
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-7-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-6-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-4-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-3-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF or it is powered off, and
hidden from the guest.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-2-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When a VFIO device is hoplugged in a VM using virtio-iommu, IOMMUPciBus
and IOMMUDevice cache entries are created in the .get_address_space()
handler of the machine IOMMU device. However, these entries are never
destroyed, not even when the VFIO device is detached from the machine.
This can lead to an assert if the device is reattached again.
When reattached, the .get_address_space() handler reuses an
IOMMUDevice entry allocated when the VFIO device was first attached.
virtio_iommu_set_host_iova_ranges() is called later on from the
.set_iommu_device() handler an fails with an assert on 'probe_done'
because the device appears to have been already probed when this is
not the case.
The IOMMUDevice entry is allocated in pci_device_iommu_address_space()
called from under vfio_realize(), the VFIO PCI realize handler. Since
pci_device_unset_iommu_device() is called from vfio_exitfn(), a sub
function of the PCIDevice unrealize() handler, it seems that the
.unset_iommu_device() handler is the best place to release resources
allocated at realize time. Clear the IOMMUDevice cache entry there to
fix hotplug.
Fixes: 817ef10da2 ("virtio-iommu: Implement set|unset]_iommu_device() callbacks")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240701101453.203985-1-clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event")
Cc: jasowang@redhat.com
Cc: qemu-stable@nongnu.org
Reported-by: Xoykie <xoykie@gmail.com>
Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
New DCD command definitions updated in response to review comments
from Markus.
- Used CxlXXXX instead of CXLXXXXX for newly added types.
- Expanded some abreviations in type names to be easier to read.
- Additional documentation for some fields.
- Replace slightly vague cxl r3.1 references with
"Compute Express Link (CXL) Specification, Revision 3.1, XXXX"
to bring them inline with what it says on the specification cover.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240625170805.359278-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's observed that Linux kernel booting with the VM reports a "conflicting
mapping for input ID" FW_BUG.
The IORT doc defines "Number of IDs" to be "the number of IDs in the range
minus one", while virt-acpi-build.c simply stores the number of IDs in the
id_count without the "minus one". Meanwhile, some of the callers pass in a
0xFFFF following the spec. So, this is a mismatch between the function and
its callers.
Fix build_iort_id_mapping() by internally subtracting one from the pass-in
@id_count. Accordingly make sure that all existing callers pass in a value
without the "minus one", i.e. change all 0xFFFFs to 0x10000s.
Also, add a few lines of comments to highlight this change along with the
referencing document for this build_iort_id_mapping().
Fixes: 42e0f050e3 ("hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619201243.936819-1-nicolinc@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In e820_add_entry() the e820_table is reallocated with g_renew() to make
space for a new entry. However, fw_cfg_arch_create() just uses the
existing e820_table pointer. This leads to a use-after-free if anything
adds a new entry after fw_cfg is set up.
Shift the addition of the etc/e820 file to the machine done notifier, via
a new fw_cfg_add_e820() function.
Also make e820_table private and use an e820_get_table() accessor function
for it, which sets a flag that will trigger an assert() for any *later*
attempts to add to the table.
Make e820_add_entry() return void, as most callers don't check for error
anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <a2708734f004b224f33d3b4824e9a5a262431568.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both the other two callers of build_iort_id_mapping() just directly pass
in the IORT_NODE_OFFSET macro. Keeping a "const uint32_t" local variable
storing the same value doesn't have any gain.
Simplify this by replacing the only place using this local variable with
the macro directly.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619001708.926511-1-nicolinc@nvidia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d7c72735f6 ("target/i386: Add new EPYC CPU versions with updated
cache_info", 2023-05-08) ensured that AMD-defined CPU models did not
have the 'complex_indexing' bit set, but left it set in "-cpu host"
which uses the default ("legacy") cache information.
Reimplement that commit using a CPU feature, so that it can be applied
to all guests using a new machine type, independent of the CPU model.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Marc-André Lureau