glsl4: Replace some define with function (ogl4 support function pointer). Explain how depth is computed in vertex shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5233 96395faa-99c1-11dd-bbfe-3dabce05a288
- Added "Aggressive-CRC" checkbox at the HW hacks section of the config dialog.
- The following hacks are now activated only in aggressive mode:
- God of War 2: disable water effect/lines, disable global haze.
- FFX, FFX2, SSX3 (the full crc hack from r5214).
- Shadow of the Colossus: disable (over)bloom.
- Reverted the Valkyrie Profile 2 hack to pre- r5214.
- Some CRC fixes by comments on r5214.
- Regression fix of dynamic crc hack (INITIAL_MODE = 0 didn't compile)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5221 96395faa-99c1-11dd-bbfe-3dabce05a288
* properly release shader in release mode
* set stream format every time an array buffer is bound
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5219 96395faa-99c1-11dd-bbfe-3dabce05a288
.
Allows to have a single dynaCRC DLL for several games, differentiated by their CRCs by using the new utility IsCRC(0x12345678, 0x87654321, ...).
Note: With old GSdx (and updated new DynaCrcHack.c), IsCRC always returns false.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5215 96395faa-99c1-11dd-bbfe-3dabce05a288
- 14 Updated hacks, 41 new hacks (See full list at the first comment).
- New crc-hacks might have patial crc lists, so it's possible that some copies won't get the benefit (yet).
- Non crc-hacks code was NOT imported from Cutie, so some crc hacks might not be as effective as within Cutie itself.
- New region: CH, few more CRCs.
Note:
Due to the very big list of affected games, I couldn't test the vast majority of them, and so your help would be appreciated in testing. Please report (even if someone else already reported with the same result as yours) with the following format:
<game name> - <better/worse/same> (reason) - tested <little/medium/much>
e.g.:
Tomb Raider Legend - Better (removes garbage graphics) - tested a little.
GTA San Andreas - Better (removes ghosts) - tested a little.
And of course, big thank you goes to the author of Cutie, for the time put into improving PCSX2, and for respecting the GPL license and releasing the code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5214 96395faa-99c1-11dd-bbfe-3dabce05a288
* some parameters was set after the shader setup. Extend the API to do the shader setup before the draw
* remove the useless shader compatibility bits
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5212 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix properly context, directly save the state in the shader
* replace the last deprecated variable in the shader. Remain the issue that host enable 1 output and the shader write 2 outputs
* It seems that VBO does't depends on the VAO but vertex format depends on both VBO/VAO so I set the format multiple time. Not sure the behavior is fully correct
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5211 96395faa-99c1-11dd-bbfe-3dabce05a288
zzogl: rework the shader interface to use struct like CG. Shader are still broken because some variables (gl_color & gl_secondary_color) are not supported in vertex shader...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5209 96395faa-99c1-11dd-bbfe-3dabce05a288
* use 128 vertex buffer instead of 512 that will avoid to fill the GPU vram
* Use separate shader infrastructure for GLSL 4 as Nvidia cg. Beside code is much easier to understand
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5208 96395faa-99c1-11dd-bbfe-3dabce05a288
various: apply some patch of Micove to disable debug logging in GSdx release mode
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5206 96395faa-99c1-11dd-bbfe-3dabce05a288
* Clean the zzsetparameter API to always use the program for uniform that depends on the program. Future goal is to use a nice OO interface
* Use uniform buffer. Would allow future optimization and remove most initialization stuff. Don't support yet the 2 zzogl contexts.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5201 96395faa-99c1-11dd-bbfe-3dabce05a288
* drop hack for of Natty and use the std FindGtk2 module, time to upgrade to Precise.
* Bump cmake requirement to 2.8.5 to avoid multiarch issue
* Create new cmake variable GLSL_SHADER_DIR for glsl file. Default value /usr/share/games/pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5200 96395faa-99c1-11dd-bbfe-3dabce05a288
pcsx2: don't print window title in fullscreen because it create a white frame flickering. Seem like a wx regression
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5199 96395faa-99c1-11dd-bbfe-3dabce05a288
* Add 2 new dev options: REBUILD_SHADER (nvidia cg) & BUILD_REPLAY_LOADERS
* zzogl-pg-cg will use the shader of zzogl-pg.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5190 96395faa-99c1-11dd-bbfe-3dabce05a288
* add some code to support OGL4 debugging. Not enable on CmakeList.txt by default
* LOAD_PS/LOAD_VS were using a "std" argument instead of a reference.
* reuse the opengl context creation developed for GSdx. For the moment only enable OGL2
* Add some documentation for the zzShader API
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5188 96395faa-99c1-11dd-bbfe-3dabce05a288
* for the moment only the SW render is supported, hopefully HW will come some day. And linux only for the moment.
* Require an OpenGL3 GPU (==Dx10) ie Nvidia >= 8800, AMD >= HD2000)
* Require an OpenGL4.2 compatible drivers => no opensource driver supported neither Intel driver.
* Build by default without SDL support which will dropped later. You need to add this define "ENABLE_SDL_DEV" on Win.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5186 96395faa-99c1-11dd-bbfe-3dabce05a288
* put shade boost in HW setting (not sure it is HW only)
* Remove logz, useless since openGL support 32bits Z buffer
* Update hack section with a table. Note don't put MSAA (not yet implemented) to have a nice square
Note: user hack is enabled with "UserHacks" instead of "allowHacks"
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5184 96395faa-99c1-11dd-bbfe-3dabce05a288
The detection is based on a quickly reversed smode1 flag and needs to be done properly.
The timing itself also needs reversing and has only been tested on the VP2 intro video.
(That video now runs without audio / video desync when progressive scan is enabled :) )
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5179 96395faa-99c1-11dd-bbfe-3dabce05a288
various:
* rename the man page as requested by arch users.
* Delete pcsx2/* symlink. Was only useful for autotool removed few years ago.
* commit the top metadata of my previous branch merge.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5172 96395faa-99c1-11dd-bbfe-3dabce05a288
* new memory management
* asm was replaced by intrinsic
* new GLSL backend (AMD only) Cmake is probably broken anyway with the 2 plugins...
* and lots of others stuff that I forgot about it ;)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5166 96395faa-99c1-11dd-bbfe-3dabce05a288
Then it would be easier to separate CG/GLSL for copyright issue. CG is not compatible with the GPL...
Old version will be zzogl-pg-cg
Future version will be zzogl-pg
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5165 96395faa-99c1-11dd-bbfe-3dabce05a288
Previously: GSdx was switching between the configured renderer and the best SW renderer (best = DX11 if supported).
Now: If using DX: Switch SW/HW renderer and use the same DX version. If using SDL: same as before.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5164 96395faa-99c1-11dd-bbfe-3dabce05a288
* build the utility to prebuilt cg shader (zzogl-shader)
* build the shader (ps2hw_cmake.dat) that would avoid copyright issue for debian/ubuntu
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5159 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake: keep all library for the linking of plugins
hex2h.pl: add svn:executable
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5157 96395faa-99c1-11dd-bbfe-3dabce05a288
* change the man page to gpl3
* add missing copyrigh for zerogsshader
* re write bin2cpp tool (in perl) to avoid any copyright issue => hex2h.pl
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5155 96395faa-99c1-11dd-bbfe-3dabce05a288
* update missing copyright on
+ plugins/GSdx/config.h
+ pcsx2/MTVU.h
+ plugins/zzogl-pg/opengl/ZZHacks.h
+ plugins/spu2-x/src/DplIIdecoder.cpp
* put a copyright for trivial script file
+ pcsx2/gui/Resources/rebuild.sh
+ tools/bin2app.sh
+ plugins/zzogl-pg/opengl/shaders.sh
* remove autotool from zzogl
* apply the patch for issue 1257. Thanks very much Micove for the hard work.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5154 96395faa-99c1-11dd-bbfe-3dabce05a288
* Only available on debug build
* ctrl F9 -> dump a couple of frames
* ctrl shift F9 -> start/stop a stream of frames.
* Build a replayer too, called pcsx2_ZZReplayLoader
Note: dump are saved in /tmp.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5152 96395faa-99c1-11dd-bbfe-3dabce05a288
Some games use volume slides combined with reversed phase.
Gigaherz tweaked the code to handle this nicer (fixes Mashed Drive to Survive noises).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5139 96395faa-99c1-11dd-bbfe-3dabce05a288
* Keep the state of the draw buffer (save few opengl call)
* AMD fix the shader unloading (12.2 and above). So disable the workaround
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5137 96395faa-99c1-11dd-bbfe-3dabce05a288
Change a texture cache hack to fix half the flickering FMV games.
It could have issues though, or randomly fix other stuff. Please test :p
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5130 96395faa-99c1-11dd-bbfe-3dabce05a288
Another refinement to the Wild Arms hack by KrossX.
The hack now only applies to one kind of geometry (sent using the unpacked UV handler).
This works nicer in Wild Arms as it fixes "jumpy" characters.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5124 96395faa-99c1-11dd-bbfe-3dabce05a288
Mouse over descriptions for the hacks. Thanks to KrossX again, these are great :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5123 96395faa-99c1-11dd-bbfe-3dabce05a288
Adding KrossX's Wild Arms text alignment hack to the new dialog box. This hack is actually very interesting for a number of games. It should work well in cases where game designers adjusted everything pixel perfect for the GS, that usually breaks with upscaling.
It should be generalized and renamed later.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5120 96395faa-99c1-11dd-bbfe-3dabce05a288
Team effort of KrossX and myself:
Finally adding that special game fixes / hack dialog I talked about for a while.
Committing this in several steps to clean up any issues easier.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5116 96395faa-99c1-11dd-bbfe-3dabce05a288
* request a minimum of 1 for texture dimension
* Use offscreen texture likes DX11.
* add more bits for extra texture format
* do operation on texture unit 0 to avoid ping-pong between unit 0/2
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5114 96395faa-99c1-11dd-bbfe-3dabce05a288
Committing a hack KrossX prepared (thanks) ;)
It can be used to fix bad character sprites in Gust games.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5101 96395faa-99c1-11dd-bbfe-3dabce05a288
* Use the new map interface/separate texture coordinate inside shader
* support new format on texture
Note: it is quite instable with various crashes and GL error but at least it compiles now :p
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5094 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake: compilation fix on debian sid (and potentially ubuntu)
i18n: add some comment for potential language change in the future.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5088 96395faa-99c1-11dd-bbfe-3dabce05a288
* implement some missing shader for DATE, invert coordinate like strech rectangle
* Use glCopyImageSubDataNV nvidia extension to copy image (you need latest AMD drivers)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5086 96395faa-99c1-11dd-bbfe-3dabce05a288
* Fix some issue on wnd management, mix between sdl/ogl render
* create new gsdx option for ogl debug
+ debug_ogl_dump: start frame to dump when not 0
+ debug_ogl_dump_length: length of the dump
+ debug_ogl_shader: print shader debug
Note current dump option must be fixed to use linux path.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5067 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix bad setup issue for constant blend factor
* Use a read framebuffer to read back the texture (less disruptive)
* cmake separate the loader to the main plugins
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5064 96395faa-99c1-11dd-bbfe-3dabce05a288
Let users set software parameters (extra threads and line AA) regardless of currently configured renderer.
Makes testing far easier.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5051 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix some issue with cmake and new sdl define
* Implement shortcut key handling on linux.
+ some option are not yet implemented (fxaa)
+ gs dump can be created with <shift> <F8>
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5050 96395faa-99c1-11dd-bbfe-3dabce05a288
* add some define to enable/disable SDL so we could build gsdx without SDL
* debug: dump data based on frame count rather from draw count
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5044 96395faa-99c1-11dd-bbfe-3dabce05a288
* move all vertex buffer stuff into the class
* Bypass FIFO2 because of multithread issue with OGL(temporary workaround until we found a nicer solutions)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5035 96395faa-99c1-11dd-bbfe-3dabce05a288
* invert the index of fragment output. Seem to work better on Nvidia (strangely no impact for AMD)
* opengl support pitch too, so remove useless copy to an fbo
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5034 96395faa-99c1-11dd-bbfe-3dabce05a288
* Fix the Geomtry shader to output 2 triangles for quad primitive (ie 2R rendering)
- There is an AMD driver bug on geomtry shader input interface (well could be the spec too). Tell me if it still working on nvidia
* Add a workaroung to a previous AMD bug. It is impossible to unattach a shader so destroy the full shader pipeline...
* Be more strict on FBO management. Would optimize it later
* use a texture insted of a render buffer for depth-stencil management.
* add more dumping capabilities (in particular depth buffer)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5033 96395faa-99c1-11dd-bbfe-3dabce05a288
* It works with the HW renderer !!!
* Not sure this fix will work with dual blending but we will see later
* screen is vertically flipped again...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5031 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix vertex shader for HW renderer :) Remains the fragment part...
* add some dumping infrastucture (DUMP_START and DUMP_LENGTH)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5030 96395faa-99c1-11dd-bbfe-3dabce05a288
...
<avih> so, come on, touch spu2x to have recent rev number
Touched... hopefully I touched right. Felt awkward.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5024 96395faa-99c1-11dd-bbfe-3dabce05a288
* add the code to select the attribute (still the default but can be changed now)
* add a hidden option (condvar) to select between the 2 threads algorithm
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5021 96395faa-99c1-11dd-bbfe-3dabce05a288
* use memory instead of tr1 (was the experimental implementation of c++11)
* remove strict aliasing optimization because I saw some bad warnings
* Fix pthread of the previous commit. Use default attribute but it might need some tuning
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5020 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix the new extra thread option in the gui dialog
* implement condition variable on linux. Will need some benchmark.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5017 96395faa-99c1-11dd-bbfe-3dabce05a288
This makes the Arc the Lad fog issue go away.
Review would be nice though :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5011 96395faa-99c1-11dd-bbfe-3dabce05a288
* go back to opengl 4.1 (nvidia driver is buggy with 4.1).
* fix the backbuffer allocation. bad order of parameter
* fix remaining glsl error
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5006 96395faa-99c1-11dd-bbfe-3dabce05a288
* rework a little the shader to be hopefully compatible with nvidia
* request a pure 4.2 context (all gpu 4.1 capable support 4.2 anyway)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5003 96395faa-99c1-11dd-bbfe-3dabce05a288
- 0: no multi-threading
- 1: gif packet processing and texture uploads run parallel with rendering, the slowest decides the fps, dual-cores can still suffer by the spin loops, I'll check that when I compile pcsx2 on my notebook
- 2: two rendering threads, on a decent cpu packet processing is going to be slower now, this is probably going to increase fps the most on quads
- 3: small fps increase
- 4+: even smaller.
If you have a quad cpu with HT, 6 is the max, 1 + 1 is needed for pcsx2 and gsdx's basic tasks.
Also hacked palette writes to not force a read-back in hw mode (added in previous rev), it hit render targets in a surprising large number of games.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4998 96395faa-99c1-11dd-bbfe-3dabce05a288
* rewrite the vertex management with a nice GSVertexBufferState object
* extend GSUniformBufferOGL to use a better object interface
* properly delete texture
* manage buffer with glMap* instead of glBufferSubData
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4990 96395faa-99c1-11dd-bbfe-3dabce05a288
* Enable interlace feature. (note I'm well aware that interlace crashes with SDL)
* remove useless callback debug function
* handle the y axis differently. Move vertex to follow right-hand system (render everything in reverse) then flip the y-axis for the screen rendering
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4987 96395faa-99c1-11dd-bbfe-3dabce05a288
* improve vertex management with a vertex array. Decorrelate vertex from strech rec and others func (later for the HW renderer)
* fix the crash on nvidia when closing the window
* clean some texture management code
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4985 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a callback for GLERROR. Allow to breakpoint on GSDeviceOGL::DebugCallback (gdb is completely lost on amd driver, hope it is better on nvidia)
* Add some empty glsl convert to shutup some useless debugging error
* request an advance opengl context without pre 3.0 feature.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4983 96395faa-99c1-11dd-bbfe-3dabce05a288
* flip y-axis in merge stage
* default to xlib window managment (the dynamic switch between sdl and xlib crashi but SDL will probably dropped later)
* improve management of FBO, draw buffer
* try to fix some issue with glClearBuffer but spec is not clear.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4982 96395faa-99c1-11dd-bbfe-3dabce05a288
* implement the saving of texture (take bmp SW code)
* fix the missing "enable attribute code" and the typo in glsl. It works now !!!
* rework a little texture to pack texture into a temporay buffer when src pitch != dst pitch
* try to replace sdl with pure xlib (not yet enabled by default but it seems to work)
Note there still a minor issue, coordinate are different between DX and OGL (upper-left vs lower-left) so the image is inversed.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@4981 96395faa-99c1-11dd-bbfe-3dabce05a288
gregory.hainaut