* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
SDL2.0 removed SDL_HAPTIC_SQUARE because of ABI issues (see comment #7 on issue
6491 by Ryan C. Gordon from the SDL project). It will be reintroduced again in
2.1, so keep the code and #ifdef it away.
This reverts commit cce809ac90.
The code was actually correct: "expr" is never allocated when an error is
returned. This means when the expression parser fails, deleting "expr" means
deleting an uninitialized pointer.
Without clearing out the "accumulator" for the backtick parsing,
our control name was full of junk (the previous device name) causing
us to not correctly find the control.
Ensure that always we clear the "accumulator" string during backtick
parsing.
Otherwise, valid control names like "Cursor X+" would be incorrectly
tokenized as "`Cursor` `X` +", causing the parser to first abort trying to
find a control named `Cursor` rather than aborting with invalid syntax on
the bad binop.
We could also do this by resolving devices lazily, but since simple
control name bindings are going to be 90% of usecases, just look for these
first.
Yeah, yeah, it's possible that some guy would try to build DInput
without XInput, but they're crazy, and I doubt it would have worked
since the header file mess was so fragile anyway. Always exclude
DInput devices when we don't have XInput.
If an expression can't be parsed normally, we then look to see if it's a
simple device name. This keeps backwards compatibility with simple input
ocnfigurations, where people just used the Detect button.
This contains a new, hand-written expression parser to replace the old
hack language based on string munging. The new approach is a simple
AST-based evaluation approach, instead of the "list of operations"
infix-based hack that there was before.
The new language for configuration has support for parentheses, and
counts "!" as a unary operator instead of the binary "NOT OR" operator
it was before. A simple example:
(X & Y) | !B
Explicit device references, and complex device names ("Right Y+") are
handled with backticks and colons:
(`SDL/0/6 axis joystick:Right X+` & `DInput/0/Keyboard Mouse:A`)
The basic editor UI that inserts tokens has not been updated to reflect
the new language.
Some indentations were also too far for some things. Fixed this.
Also update the license header to show Git instead of SVN.
Got rid of some trailing spaces/tabs too.
* Changed the mapping of the steering wheel to:
Main Stick Left/Right = Steer Left/Right
Main Stick Up = Accelerate
Main Stick Down = Brake
* Fixed non-force feedback controllers that were not detected
This adds support for drivers supporting sine, square and triangle
periodic haptic effects. This allows rumble to work on devices/drivers
supporting these effects, such as an xbox controller using the xpad
driver under Linux.
Dolphin code already builds against SDL2 but the build system never
checks for SDL2, which is the what latest SDL is called now. SDL2
replaces SDL 1.3. This allows Dolphin to be build against SDL2, which
activates certain new features such as the haptic interface.
Judging by the feedback provided by other OSX users, this appears to fix the crash when starting Dolphin on OSX with devices that have an empty name.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7598 8ced0084-cf51-0410-be5f-012b33b47a6e
Add the option to clear a title from the NANDContentLoader and attempt to reload it
This allows the using the system menu immediately after installing rather than requiring a relaunch
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7290 8ced0084-cf51-0410-be5f-012b33b47a6e
that cause IOHIDValueGetIntegerValue() to smash the stack when trying
to convert them.
In practice, all relevant axes seem to also be available as either
8 or 16-bit values, so just ignore anything that doesn't look like
that (or a button).
Fixes issue 3931.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7255 8ced0084-cf51-0410-be5f-012b33b47a6e
Changes:
* Allow events to be scheduled when the emulator is not running. This allows the save state event to be added before the emulator starts.
* Removed the Audio back-end init flag from the save state. This value should not be saved as it is not data relevant to guest machine.
* Allow a recording to be started at any time (apart from when a recording is already being made).
* Updated the status bar and title bar when an on-screen message is shown
* Removed the saving of PEToken from the save state as the FIFO will save this information
* Added a couple Pixel Engine interrupt states to the save state
* Added the copyright notice to the GCPadStatus.h file.
This function is preliminary. Let us know of any bugs you find or any UI quirks.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7175 8ced0084-cf51-0410-be5f-012b33b47a6e
buildfix
move much of the build settings to .props files
-please use them as much as possible in the future, instead of changing individual projects
NOTE: to avoid left over blobs, clean your builds *before* applying these changes.
TODO: add DebugFast target for projects that are lacking it. Lack of DebugFast targets cause the linker to use LTCG when we don't want it.
please test for regressions which could be caused by being too happy with compiler flags :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7109 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
fix all build targets (they've all built here - you may have to manually delete the intermediate directories if you have conflicts after this commit).
set the debug path to $(TargetDir)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7022 8ced0084-cf51-0410-be5f-012b33b47a6e
which has too narrow a view of what constitutes a joystick.
Now if only I could find my Apple IR Remote.. :-)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6844 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added an option to explicitly disable building with MPG framedumps. To use it add -DENCODE_FRAMEDUMPS=OFF to cmake on the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6429 8ced0084-cf51-0410-be5f-012b33b47a6e
Add a version check for avcodec and swscale libraries.
Fix a bug in the xlib wiimote emulation button configuration. If you are using a mouse button for wiimote emulation you may need to adjust your settings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6426 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
Jules Blok