Logs should actually be somewhat understandable to some people outside of programming and stuff (in a way). It's certainly better than being bombarded by abbreviations when errors/general logging occur, at least.
This commit mainly elaborates on some messages a little more. Also fixes some typos that slipped through the last commit.
A large change in text can be seen in EXI_DeviceMemoryCard.cpp. I added more info as to why a write to a memory card may fail. (This actually was a reason I was unable to write to a memcard recently).
Elaborations can be seen in WGL.cpp
I did change some comments in some files that I was correcting logging messages in, however this is only if I spot a typo or if an abbreviation is lower-cased. Even in that case, the amount of changes done to comments is very minimal.
Sorry for a direct commit to the main branch but i need fast feedback, and i don't want to leave problematic code in the main branch for a long time.
if this approach does not work for the drivers with problems will transform dual source blend to an option in the D3D9 backend.
I appreciate the help of the people that tested my last commit and thanks to neobrain for pointing this solution.
Convert all quads+triangles into trangle_strip and uses primitive restart to split them.
Speed up triangle_strip, but slows down all others primitive formats.
Only implemented in ogl.
this implementation does not work in windows xp (sorry no support for dual source blending there).
this should improve speed on older hardware or in newer hardware using super sampling.
disable partial fix for 4x supersampling as I'm interested in knowing the original issue with the implementation to fix it correctly.
remove the deprecation label from the plugin while I'm working on it.
# By Ryan Houdek (185) and others
# Via degasus (12) and others
* master: (625 commits)
Revert "Don't open/close file for every file operation." as it was crashing PokePark in Windows builds.
Array overrun fixed in VertexShaderCache for the DX11 plugin.
Fixed DSPTool build.
Windows build fix
Go back to assuming every HID device is a wiimote on Windows. Fixed issue 6117. Unfixed issue 6031.
VideoSoftware: Improve fog range adjustment by using less magic and more comments.
revert RasterFont for VideoSoftware
ogl: fix virtual xfb
Windows build fix from web interface...
Adjusted the audio loop criteria, using >= on the Wii and == on GC. This fixes the audio static that occurred in Wii games after hours of play.
Forced the exception check only for ARAM DMA transfers. Removed the Eternal Darkness boot hack and replaced it with an exception check.
VideoSoftware: Implement fog range adjustment, fixing issue 6147.
implement 4xSSAA for OGL
move ogl-only settings into backend
Fix description of disable fog, and move it to enhancements tab.
Reverted rd76ca5783743 as it was made obsolete by r1d550f4496e4.
Removed the tracking of the FIFO Writes as it was made obsolete by r1d550f4496e4.
Forced the external exception check to occur sooner by changing the downcount.
Mark the Direct3D9 backend deprecated.
Prefer D3D11 and OpenGL over D3D9 by default.
...
Conflicts:
CMakeLists.txt
Source/Core/Common/Common.vcxproj.filters
Source/Core/Common/Src/CommonPaths.h
Source/Core/Core/Core.vcxproj.filters
Source/Core/Core/Src/Core.cpp
Source/Core/Core/Src/IPC_HLE/WII_IPC_HLE_Device_FileIO.cpp
Source/VSProps/Dolphin.Win32.props
Source/VSProps/Dolphin.x64.props
* Fast-EE:
Forced the exception check only for ARAM DMA transfers. Removed the Eternal Darkness boot hack and replaced it with an exception check.
Reverted rd76ca5783743 as it was made obsolete by r1d550f4496e4.
Removed the tracking of the FIFO Writes as it was made obsolete by r1d550f4496e4.
Forced the external exception check to occur sooner by changing the downcount.
MSAA is a optimiztion to execute the fragment shader just once per pixel instead per sample.
It sounds great, but has a big issue: At edges where the center isn't in the polygon, the
fragment would still be executed, but still with the center of the pixel as position.
So if some calculations aren't allowed outside the polygon, the result would be invalid.
But the nice one: we can give a hint to each input to be choosen from a valid pixel,
so now every pixel will be calculated with valid source.
At the end of July 2011, LM published a free DSP ROM that works with games
using the Zelda UCode. His ROM only has the code to handle UCode loading and a
few utility functions, the rest is missing. This includes the four large sound
mixing functions used by the AX UCode and the DROM containing coefficients used
for polyphase resampling in AX.
This is an improved, updated version of this ROM, which changes the following:
- We now have a free DROM that works for polyphase resampling by "emulating"
linear interpolation. The coefficients contained in the DROM are normally a
list of { c1, c2, c3, c4 } which are used to interpolate a sample value from
four previous samples:
out_sample = prev1 * c1 + prev2 * c2 + prev3 * c3 + prev4 * c4
The coefficients are chosen depending on the fractional part of the current
position (basically, our position between the previous and the next sample).
We can use this fact to generate (c1, c2, c3, c4) for each possible
fractional part so that:
out_sample = prev3 * curr_pos + prev4 * (1 - curr_pos)
Which is the formula for linear interpolation between prev3 and prev4. Linear
interpolation is not as good as polyphase resampling but it still works very
well and I couldn't really hear any difference between the two. If someone
wants to generate real polyphase filter coefficients, they are welcome to
submit a patch.
- The IROM now contains the 4 mixing functions used by the AX UCode: mix_add,
mix_add_two, mix_add_ramp, mix_add_ramp_two. They are large, inlined
functions (probably for performance reasons) in the official DSP IROM, our
version prefers to use a loop. This *should* be more performant with our DSP
JIT implementation, but I did not benchmark that.
Because the new DSP ROM is working just as well as the official ROM in 95% of
cases, it is now shipped by default with Dolphin and will be used with DSPLLE
if you don't have an official DSP ROM in User/GC. It will still display a panic
alert at every boot to notice you that you are using a non official DSP ROM
made by us, which is not perfect.
Games using the CARD, IPL or GBA UCodes are still broken. I don't know what
games this actually impacts, but this is a very small proportion compared to
what works.
Merge an endless story. The branch name is a lie, it was started as glsl, but now it is a complete reworked opengl3 backend.
It just began with simple changes which aren't supported on osx.
They either support ogl2 OR ogl3 core, but mixing isn't allowed.
As the branch name says, the vicious circle starts with GLSL, but just implementing one wasn't possible either:
- OSX supports only GLSL100 which doesn't support our shaders.
- Vertex Array Objects are needed for ogl3, but not supported on ogl2
- immediate mode isn't supported any more, so we must implement vertex buffers
- uniform buffers are recommended as else we would need tons glUniform
- postprocessing shaders have to be converted to glsl
- lots of smaller outdated issues and bug fixes :-)
Thanks at all for testing and at Sonic for converting all of our shaders to glsl130
And sorry for all upcoming bugs...
# By skidau (30) and Pierre Bourdon (1)
* FIFO-BP: (31 commits)
Set g_bSignalTokenInterrupt on the main thread. Fixes the random hang in Harry Potter: Prisoner of Azkaban.
Used a scheduled event to generate the ARAM DMA interrupt if the DMA is greater than a certain size. Fixes NFS:HP2 GC.
Bumped up the disc transfer speed enough to prevent audio stuttering in Gauntlet: Dark Legacy.
Enabled Synchronise GPU on "SPEED CHALLENGE - Jacques Villeneuve's Racing Vision". Required to go in-game.
Added direct GameCube controller commands to the Serial Interface emulation. Fixes the controls in MaxPlay Classic Games Volume 1 and the Action Replay disc.
Increased the FIFO buffer size to 2MB from 1MB. Fixes Killer 7's Angel boss.
Used an immediate GenerateDSPInterrupt when transferring data from ARAM to MRAM and a scheduled DSP interrupt when transferring data from MRAM to ARAM.
Fixes the audio cutting in and out in the Resident Evil GC games using DSP HLE. Triggered the ARAM interrupt by the scheduler instead of directly in function.
Implemented proper timing for the sample counter in the AudioInterface, removing the previous hack. Cleaned up some of the audio streaming code.
Skipped the EE check if there is a CP interrupt pending.
Disabled "Speed up disc transfer" from the ZTP GC game ini.
Removed the disc seek times for GC games and removed the disc speed option on Wii games. Checked for external exceptions only in mtmsr.
Delayed the interrupts in the EXI Channel.
Merge aram-dma-fixes (r76a13604ef49b522281af75675f044d59a74e871)
Added a patch that bypasses the FIFO reset code in Wallace and Gromit: Project Zoo, allowing it to go in-game.
Made vertex loading take constant time.
Increased the cycle time of the vertex command. Fixes "Speed Challenge: Jacques Villeneuve's Racing Vision".
Moved the setting of the Finish interrupt signal back to the main thread as it was causing Wii games like Resident Evil 4 (Wii) to hang.
Profile stores, fp stores and ps stores only to the fifo write addresses list. This should make the JIT a little faster as it will not be checking for external exceptions unnecessarily.
...
Conflicts:
Source/Core/VideoCommon/Src/PixelEngine.cpp
Jordan Woyak