libusb transfer callbacks might be called immediately during transfer
submission in some cases. (libusb doesn't even specify what thread
the callback is invoked on.) In other words, it is possible to reach
the transfer callback from the CPU thread, and not just from the
USB event handling thread.
So CoreTiming::FromThread::NON_CPU is incorrect and should instead
be ANY.
Unfortunately, it appears that using libusb's synchronous transfer API
from several threads causes nasty race conditions in event handling and
can lead to deadlocks, despite the fact that libusb's synchronous API
is documented to be perfectly fine to use from several threads (only
the manual polling functionality is supposed to require special
precautions).
Since usbdk was the only real reason for using a single libusb context
and since usbdk (currently) has so many issues with Dolphin, I think
dropping support for it in order to fix other backends is acceptable.
Now that the floating point members are assigned in bulk, we can remove
their setter macro. While we're at it, we can also remove the setter for
unsigned int, given it's not used.
We were doing quite a bit of unnecessary work within CMake to handle and
make sure the necessary libraries were copied over. That approach has
several downsides:
1. It's not possible to handle multi-configuration generators (like
Visual Studio) in an easy manner. The existing script would fail to
copy over the necessary libraries if one configuration was built, and
then another one was built.
2. If you have Qt already installed (properly) by the official binary,
the existing script would copy *all* dlls even if they weren't
necessary. This is pretty bad, since it can waste quite a bit of
space.
Instead, we can just delegate off to the official deployment application
bundled with Qt's libraries that determines what the necessary libraries
are and copies them over as necessary. This also means we can properly
support both release and debug binaries in the same directory, like how
the old handcrafted Visual Studio project files allowed.
Its sufficient to simply specify a debug postfix instead of using an
separate variable. What's nice about this approach is that it will
actually work :p
Previously the code wouldn't work for multi-configuration generators
like Visual Studio.
When the bluetooth adapter device is opened/closed by dolphin, the
kernel driver is automatically detached/reattached.
This enables transparent sharing of the same bluetooth wiimotes and
bluetooth adapters between the hosts system and the emulated one using
the same.
ImGui::Text() assumes that the incoming text is intended to be
formatted, but we don't actually use it to format anything. We can be
explicit by using the relevant function.
This also has a plus of not needing to go through the formatter itself,
but the gains from that are probably minimal.
Previously these functions were declared without the static specifier,
giving them external linkage, which isn't really ideal.
Instead, we can place these functions up by the relevant file-scope
variables and place them inside an anonymous namespace with said variables,
giving them internal linkage.
Avoids the use of the null pointer to represent an empty string.
Instead, we can simply pass an empty string_view instance. Using
std::string_view enforces this invariant at the API level.
Due to the lack of cast here, this will actually print out the ascii
value, rather than the character itself, due to promoting to integral
values. Instead, we can eliminate the use of character operands and just
print the value itself directly, given it's equivalent behavior with
less code.
Allows these arrays to be placed within the read-only segment (and
enforces the immutability in the code itself). While we're at it, we can
make use of std::array here.
Now that the std::map less-than comparitor is capable of being used with
heterogenous lookup, we're able to convert many of the querying
functions that took std::string references over to std::string_view.
Now these functions may be used without potentially allocating a
std::string instance unnecessarily.
Previously, when performing find() operations or indexing operations on
the section map, it would need to operate on a std::string key.
This means cases like:
map.find(some_string_view)
aren't usable, which kind of sucks, especially given for most cases, we
use regular string literals to perform operations in calling code.
However, since C++14, it's possible to use heterogenous lookup to avoid
needing to construct exact key types. In otherwords, we can perform the
above or use string literals without constructing a std::string instance
around them implicitly.
We simply need to specify a member type within our comparison struct
named is_transparent, to allow std::map to perform automatic type
deduction.
We also slightly alter the algorithm to an equivalent compatible with
std::string_view (which need not be null-terminated), as strcasecmp
requires null-terminated strings.
While we're at it, we can also provide a helper function to the struct
for comparing string equality rather than only less than. This allows
removing other usages of strcasecmp in other functions, allowing for the
transition of them to std::string_view.
fmt diverges from printf in that '.' as a precision specifier may only
be used for floating-point values (makes sense, given it's indicating
precision after the decimal point).
This fixes the problem where OBS game capture only grabs the region
inside an ImGui window whenever one is open, when using the OpenGL
backend. Shouldn't have any negative effects, as the scissor would've
been something completely arbitrary anyways.
This may affect other capture software that uses the same hooking
method, but I've only tested OBS.
In a few cases we needed to alter... less than ideal parameter types.
While u8 may have been OK with printf-style formatting, which promotes
most smaller types back to int, this won't work with fmt. fmt preserves
the type of the passed in arguments, meaning that u8, being an alias of
uint8_t (itself being an alias of unsigned char on all the platforms we
support), will print out as a character, not a numeric value.
As such, we amend some functions to operate on u32 values for two
reasons:
1. We actually want it to print out as a value
2. Arithmetic on unsigned types smaller than unsigned int will actually promote to an int,
not unsigned int. This is very non-obvious to some and makes for
error-prone code. < sizeof(int) types are great for storage, not so
much for performing unsigned arithmetic, despite the signedness of
the type.
While we do have this library as part of the public linkage interface in
the common library target, which will be used in the future for the
logging macros, we should still be explicit that we're using this
library. Therefore, we privately link it in to be explicit about it.
Begins the transition to using fmt for string formatting where
applicable. Given fmt supports formatting std::string instances out of
the box, we can remove now-unnecessary calls to .c_str() and .data().
Note that this change does not touch the actual logging subsystem aside
from converting the final StringFromFormat call in the process over to
fmt::format. Given our logging system is heavily used throughout the
entire codebase, and converting that over will be quite a large change
by itself, this will be tackled near the end of the conversion process.
Currently, it is possible for the DiscordHandler thread to be in the
middle of sleeping when Dolphin is closing. This results in a very
noticeable delay of up to 2 seconds that is unacceptable, especially
for people who don't use the Discord integration.
This fixes the issue by making the thread wait on an Event instead
and signalling it when shutting down.
It already is disabled for other backends, but this didn't happen with the software renderer. Attempting to change it while running causes the change to visually happen (including switching to the normal render settings UI instead of the barren one for the software renderer), but doesn't actually change the backend itself (it'll still use the software renderer at the next launch).
Previously, this array potentially wouldn't be placed within the
read-only segment, since it wasn't marked const. We can make the lookup
table const, along with any other nearby variables.
It appears that some older drivers do not support
CreateSwapChainForHwnd, resulting in DXGI_ERROR_INVALID_CALL. For these
cases, fall back to the base CreateSwapChain() from DXGI 1.0.
In theory this should also let us run on Win7 without the platform
update, but in reality we require the newer shader compiler so this
probably won't work regardless. Also any hardware of this vintage is
unlikely to run Dolphin well.
We can use std::array and const char* to make these capable of fully
being stored in the read-only segment, and get rid of a few static
constructors (144 of them).
Avoids dragging in IniFile, EXI device and SI device headers in this header which is
quite widely used throughout the codebase.
This also uncovered a few cases where indirect inclusions were being
relied upon, which this also fixes.
We can std::move the std::string parameter in Label's constructor,
allowing the constructor to be moved into in calling code.
We can cascade this outwards in the interface as well.
Given this is a private struct and it's used in a container that
supports incomplete types, we can forward-declare it and move it into
the cpp file. While we're at it, we can change the name to Label to
follow our formatting guidelines.
We also move the destructor definition into the cpp file, as that will
allow us to make the entire label_t type hidden from external view in a
following change.
This aims to emulate rotational latency as part of the disc drive
timings, which makes loading times have more variance (like on a
real disc drive) but should not affect the average loading times.
Starting with C++17, this allows for the same behavior as the existing
code, but without the need to manually write the out-of-class
definitions as well.
Allows for both string types to be non-allocating. We can't remove the
const char* overload in this case due to the fact that pointers can
implicitly convert to bool, so if we removed the overload all const
char arrays passed in would begin executing the bool overload instead of
the string_view overload, which is definitely not what we want to occur.
This fixes the desync on playback of start-from-boot input recordings
made while using the GC adapter, as well as other desyncs that could
potentially occur in other circumstances where this bit is used.
I used a previously reserved bit in the ControllerState to store the
new data, so this shouldn't significantly break backwards
compatibility. However, tools that aren't aware of this new bit may set
it to 0, which will break input recordings that contain it.
Since C++17, non-member std::size() is present in the standard library
which also operates on regular C arrays. Given that, we can just replace
usages of ArraySize with that where applicable.
In many cases, we can just change the actual C array ArraySize() was
called on into a std::array and just use its .size() member function
instead.
In some other cases, we can collapse the loops they were used in, into a
ranged-for loop, eliminating the need for en explicit bounds query.
MessageData must be a trivially copyable type, given it's copied into
emulated memory via our memory copy function CopyToEmu. Under the
covers, this function utilizes memcpy. One of memcpy's requirements is
that pointers to it point to types that are trivially copyable,
otherwise the behavior is undefined.
Given that, we can enforce this requirement at compile-time.
Simplifies initialization code quite a bit, and replaces a pointer
variable for SMessageData with a type properly representing the whole
set of data it needs.
These aren't modified by the class, nor do they directly need anything
related to the class state, so they can solely live within the cpp file,
hidden from external view, and also be made const, so the compiler can
place it within the read-only segment.
Makes the names consistent between declaration and definition and
adjusts them to follow our code formatting guidelines.
Now all functions in the translation unit follow our formatting
guidelines.
Constructs the strings directly within the container instead of
performing a construction, then a copy.
The reasoning is that the BACKEND_* strings are const char arrays, so
the push_back code is equivalent to:
push_back(std::string(BACKEND_WHATEVER)) instead of forwarding the
arguments to a constructed instance directly in the container.
Mike Kuijl