Commit Graph

151 Commits

Author SHA1 Message Date
lightningterror 5a69a2f689 gsdx-sw: Add an option to toggle auto flush on sw renderer.
Windows + Linux.
2019-05-02 15:35:55 +02:00
Kojin 34ac15f7eb GSdx-hw: Add secret ini option to disable TS half bottom detection 2019-04-25 13:42:47 +02:00
lightningterror c3f36ad430 gsdx-gui: Separate opengl and direct3d blending options.
A short summary how d3d option behaves compared to gl.

None d3d-> behaves the same
Basic d3d-> even less than 1/3 of Basic opengl.
Medium d3d -> less than 1/3 of Basic opengl.
High d3d -> 1/3 of Basic opengl.

Note: Medium and High options are mostly intended for debug use.
2019-04-23 15:24:04 +02:00
lightningterror e72aa23436 gsdx-gui: Purge the aout (Alpha hack) from the gui, will be useless with fbmask emulation, enable blending option on d3d11.
Blending option allows us to toggle fbmask on or off with at least basic
level just like on gl.
2019-04-22 05:07:42 +02:00
Kojin 73e3072715 GSdx-d3d11: Enable break on D3D message
Enable automatic breaking on d3d11 messages:
- D3D11_MESSAGE_SEVERITY_CORRUPTION
- D3D11_MESSAGE_SEVERITY_ERROR
- D3D11_MESSAGE_SEVERITY_WARNING
- D3D11_MESSAGE_SEVERITY_INFO

Hidden option dx_break_on_severity bitfield

Debug build only.
2019-04-08 00:45:50 +02:00
Gregory Hainaut 374374fdf1 gsdx ogl: disable sparse in extenstion detection
* Allow to keep automatic as default value in the option
* You need to force enable sparse in the option to enable sparse
2019-03-26 14:22:23 +01:00
lightningterror 5c23a9fac0 gsdx-gui: Update blending option.
Change the name to Accurate Blending so it fits more with Date option
next to it, get rid of low/high end recommended nametag for the list and
just use Recommended for Basic level, lot of users seem to be using high
for "high end pc" which they shouldn't.
2019-03-03 00:47:40 +01:00
lightningterror 80f8de5e0b Revert "gsdx-gui: Use a separate drop down list for sparse texture."
This reverts commit 61c4df0375.

It was a bad idea from the start.
2019-02-20 17:42:49 +01:00
lightningterror 61c4df0375 gsdx-gui: Use a separate drop down list for sparse texture.
It's temporary until sparse texture is fully implemented.
Force Disabled should be Default option.
2019-02-20 16:56:51 +01:00
lightningterror 5a4541f2f4 gsdx: Adjust/cleanup ini options.
Opencl device, Alpha, Alpha stencil are windows only options so no need
to clutter ini on linux with useless stuff.
2019-02-13 11:06:02 +01:00
lightningterror b5f0959e6d GSdx-gui: Set ini option to 0 for sparse texture since the feature is not yet implemented,
also add tooltip for the gui option.
2019-02-07 18:38:40 +01:00
lightningterror ad0279a0ab gsdx-gui: Add windows option for GL Sparse Texture in advanced options. 2019-02-07 18:38:40 +01:00
Gregory Hainaut 6282c3d263 gsdx ogl: remove boilerplate of extension check
* Use GLExtension::Has in cold path
* Throw error at first error
* Remove aniso check, all hardware support it. Bonus add GL4.6 extension support
* Remove viewport array check. We replace the function pointer anyway
2019-02-07 12:34:02 +01:00
Gregory Hainaut 0e4c63db5d gsdx-ogl: add extensions check that might be useful in the future
Namely
* GL_ARB_multi_bind
* GL_ARB_vertex_attrib_binding
* GL_ARB_shader_storage_buffer_object
* GL_ARB_sparse_texture
* GL_ARB_sparse_texture2
* GL_ARB_compute_shader
* GL_ARB_texture_view

v2: add default option value
2019-02-07 12:34:02 +01:00
lightningterror 4ab29eb280 gsdx: Remove some useless dx9 comments. 2019-01-26 16:13:07 +01:00
Kojin 5fe1cab889 gsdx: Remove remaining MSAA ui code
We are removing MSAA for the following reasons:
1. It's broken
2. Fixing it would mean it would perform as well as FSAA, which defeats the purpose of having it
3. It's only supported by DX and Windows
4. Reduction in code complexity

Press F to pay respect
2019-01-15 19:13:14 +01:00
lightningterror 25ed5857d8 GSdx-gui: Add 10x and 12x as an upscaling option.
10x ~3160p 6K
12x ~4320p 8K"
Can anyone even run these ?
2019-01-14 01:44:58 +01:00
lightningterror f2f66c02d3 GSdx: Add option to Disable Safe Features.
Idea is to disable multiple features in 1 option to avoid gui clutter.

Unscale Point and Line:
This partially reverts PR #2710 restoring Unscale Point and Line but as a disable option.
It can help Xenosaga games.

GS Memory clearning:
This disables GS memory clearing to be done on the CPU, by default both gpu and cpu do memory clearing
which is more accurate.
It can help Kingdom Hearts games.
2019-01-09 15:44:41 +01:00
lightningterror 6575fe7cce GSdx: Disable/uncheck "Large Framebuffer" option by default.
Some games don't play nice with the option and have huge amounts of
ram/vram spikes that can even lock up the system so it's better to have
the option disabled by default.
2018-12-26 13:43:37 +01:00
lightningterror 4076e3387e GSdx-osd: Change default font color to blue/cyan.
It matches the color theme of the emu better.
2018-12-25 02:35:49 +01:00
lightningterror 48b8d78139 GSdx-osd: Lower default font size from 28 to 25. 2018-12-22 21:56:35 +01:00
lightningterror 691eae755f GSdx-gui: Might bea good idea to also change Auto to Automatic for interlacing option to keep it consistent with the other options. 2018-12-21 00:05:05 +01:00
lightningterror 02bde2f386 GSdx-gui: Add Default name tags to default options for Anisotropic Filtering and Interlacing. 2018-12-20 23:49:28 +01:00
Kojin f8ae0f7e19 gsdx-osd: Update osd gui
Add support for color picker, remove font selector, enable the menu for dx11 and some other tweaks.
2018-12-20 15:32:04 +01:00
lightningterror 824473a34b GSdx-gui: Remove some leftover D3D9 code in the gui. 2018-12-20 14:00:03 +01:00
lightningterror fce3918562
GSdx: Purge Direct3D9 Render entirely. (#2762)
And the time has come to say good bye (good riddance?), this build removes Direct3D9 entirely from GSdx. D3D9 is/was holding us back in some D3D11 fixes that we want to further implement.
The last build that supports D3D9 is v1.5.0-dev-2779-g1a61148b0 for anyone still interested.

"Press F to pay respect.
2018-12-20 00:54:51 +01:00
lightningterror 1ad71a9b85 GSdx-gui: Remove Direct3D9 option from the gui.
D3D9 will be broken once #2756 is merged so let's disable it to avoid
any potential crashing if the render is selected.

Complete D3D9 purge will shortly follow afterwards.
2018-12-19 17:17:39 +01:00
lightningterror 584397a3fd GSdx-ogl: Implement a fast Accurate Date algorithm.
Suggested by Gregory.
Change the checkbox to a drop down list Off, Fast, Full.
Off and Full do the same as before, the Fast option is new. Most of the
time users don't actually need full Accurate Date so why not reduce that
cost and use a fast mode instead, plus it can also be used on a gpu with
a limited driver. Also change the default value to Fast instead of Off.
2018-11-28 08:21:13 +01:00
lightningterror 9899d0d6b7 GSdx: Always enable Unscale Point and Line.
Always enable unscale point and line hack on upscaled resolutions, and
purge the gui option.

It was discussed in the past with Gregoy that it can be enabled without
causing any issues which will be beneficial to getting rid of 1 less
option and fixing a bunch of fmv issues without relying on a gui toggle.
2018-11-26 17:13:45 +01:00
lightningterror 292e7a6573 GSdx-osd: Remove/purge OSD Indicator code.
The code was never working properly ( tested by @tadanokojin ) so let's
clean up and remove it. If someone actually wishes to maintain it then
they can re add it and update the code to a functional stage.
2018-11-18 14:15:17 +01:00
lightningterror 9fdb7f6cd5 GSdx-gui: Remove "Recommended" word from crc hack levels Partial and Full.
Some users get confused and change the setting to a recommended option.
This can cause some issues when switching different hw render types.
Most of the time users shouldn't change the option and leave it on
Automatic.
Also remove ICO from crc Aggressive tooltip.
2018-11-02 14:54:24 +01:00
lightningterror c92e76b17e GSdx-gui: Change internal resolution drop down list names.
This should make things a bit easier for users when picking resolutions.

Native (PS2)
2x Native (~720p)
3x Native (~1080p)
4x Native (~1440p 2K)
5x Native (~1620p 3K)
6x Native (~2160p 4K)
8x Native (~2880p 5K)
Custom (Not Recommended)
2018-10-16 16:48:50 +02:00
lightningterror 940263d490 GSdx-gui: Adjust space/rows on some tooltips so they fit better, rename Auto to Automatic list on adv. gl settings in hw hacks. 2018-10-03 15:27:42 +02:00
KrossX 560966c539 GSdx-d3d: Update nvidia hack with vendor id detection.
Hack will no longer be active on Intel or AMD gpus.
Also remove UserHacks_disable_NV_hack. sprite hack
basically does the same thing so it's kinda useless.
2018-09-25 08:35:05 +02:00
Jonathan Li 3fe9ff7ac8 gsdx: Split TC offset hack into X and Y components 2018-09-20 01:01:49 +01:00
Jonathan Li e4dd0069ca gsdx:windows: Don't refer to D3D10
Direct3D11 is used even if the user's GPU only supports Direct3D feature
level 10.0.
2018-08-29 00:48:16 +01:00
FlatOutPS2 1498f538dd gsdx:hw: Enable skipdraw hack to skip a range of draw calls
Enhance the skipdraw hack by allowing skipdraw to skip a range of draw
calls.

For example: When the broken effects are at frames 90-100, the default
skipdraw always skips 0-100, possibly skipping several functioning
effects as well. By enhancing the skipdraw feature, it is now possible
to skip just frames 90-100.

For the example given above set the first box to 90 and the second box
to 100 to skip frames 90-100.

coauthor:turtleli (Linux GUI + tidy/simplify Windows GUI code)
2018-08-20 23:35:01 +01:00
lightningterror d900917bfa GSdx-OSD: Adjust messages.
Change font size from 32 to 28 default.
Change log speed from 6 to 4 default.
Change max log messages from 3 to 2 default.
2018-05-21 17:56:14 +02:00
lightningterror 73f1d7d099 GSdx: Rename HW hacks drop list options.
Add "Default" nametag for default list options for the hacks: Sprite,
Round Sprite, GL Advanced settings, HPO.

Should help users know which options are the default ones with less
confusion.
2018-03-04 20:54:10 +05:30
lightningterror 41051f3cfe GSdx: Add hidden option to disable Nvidia hack
Add hidden option "UserHacks_DisableNVhack" to disable
the Nvidia hack on Direct3D which added black lines on the right
and bottom of the screen. Could be useful for Intel and AMD GPUs.

A better solution would be to add Vendor Id detection instead,
but this will do for now.

To disable the Nvidia hack add UserHacks_DisableNVhack=1 in GSdx.ini
2017-12-10 21:37:00 +05:30
lightningterror 6d49bf6fc6 GSdx: Automatic HW Mipmapping option
Adds automatic HW mipmapping support.
It relies on CRC ids so if a game does
not have their CRC id but needs mipmapping
it will not work until the id is added.

Add GUI menu and tooltip for Automatic mipmap
"Automatic (Default)"
This option will be default option from now on.

Rename "Very Slow" text option to "Slow" for full mipmap
as it caused the text not to fit properly in the menu.

Credits also go to @RedPanda4552 and @ssakash for helping
with the code.
2017-11-20 09:54:56 +01:00
lightningterror 1cbd4c5387 GSdx: Add CPU Frame buffer Conversion Hack
Add HW Hack that enables Framebuffer Conversion on the CPU instead of the GPU.
Can fix broken textures on games but at the cost of slower performance.
List of games: Harry Potter games, FIFA Street games.
Games like Call of Duty, Kung fu Panda might also be affected as well as others
especially on Direct3D.
Add HW Hack GUI option on Windows/Linux for 4-bit and 8-bit Framebuffer conversion hack
named "Frame Buffer Conversion".
2017-11-02 10:38:07 +01:00
Jonathan Li 54c320c724 gdsx: Prefix std:: to map
Also use auto when appropriate.
2017-09-08 09:56:28 +02:00
Jonathan Li d57b812f36 gsdx: Prefix std:: to string and to_string 2017-09-08 09:56:28 +02:00
Akash 7a3239cba0 GSDX: Remove redundant parenthesis from combobox text
The third parameter of the GSSetting constructor already encloses the
text in parenthesis, so the right bracket here just messed up things.
2017-05-07 19:31:37 +01:00
Gregory Hainaut 2d0a61fc8d gsdx ogl: use load resource to load shader
* Windows behavior must be checked
* remove glsl_source.h

v2: fix missing include
Big thanks to Turtleli

v3:
fix indentation in gsdx-res.xml
add dependency in cmake
remove old res/glsl/fxaa.fx symlink
add tfx.cl for OpenCL support on Linux

v4, v5
fix cmake indentation
2017-04-12 18:09:06 +02:00
Gregory Hainaut 38c4f5b6e7 gsdx: always NULL terminate resources on Windows
It is done automatically on Linux. Strings are much
better with this NULL char ;)

All credits go to turtleli

v2: increase resize instead of push_back NULL char
2017-04-12 18:09:06 +02:00
Gregory Hainaut ebae8b65f8 gsdx linux: implement GSdxApp::LoadResource based on g_resource
v2: use early return to reduce code/branch complexity
v3: use nullptr
2017-04-12 18:09:06 +02:00
Gregory Hainaut 1cbade511d gsdx: use vector of char as shader container
It will avoid various char cast on Linux.

v2:
remove cast on windows file and std prefix shader vector
v3:
forget to remove some char cast
2017-04-12 18:09:06 +02:00
lightningterror 820919c0a9 GSdx ogl sw: Move GL_ARB_copy_image to optional
Move GL_ARB_copy_image to optional for OpenGL SW render.
It will allow Ivy Bridge to work with OpenGL SW as it's not required.

Sandy Bridge is not yet tested , would be nice if someone could test.
2017-04-06 18:14:59 +02:00