Also set up cmake/cpack to create prebuilt binary packages and source packages.
Also change the vertex shader dump file name in the gfx debugger to something that makes more sense.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6587 8ced0084-cf51-0410-be5f-012b33b47a6e
* Optimised the updating of g_dsp.pc in the compile loop (code by kiesel-stein)
* Added JIT version of LRI (code by kiesel-stein)
* Added JIT versions of the branch instructions (code by Jack Frost)
* DSP_SendAIBuffer fix (code by Mylek)
* Marked instructions that update g_dsp.pc in the DSP table and updated PC based on the table (speed up)
* Fixed the signed bits not being set properly in the addr instruction
* Created a MainOpFallback function to use interpreted versions of the instructions if necessary (code by kiesel-stein)
* Disabled the jit versions of subarn and addarn as they are slowing down NSMBW
The above work in both x86 and x64 modes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6582 8ced0084-cf51-0410-be5f-012b33b47a6e
Make sure the gfx debugger unpauses when the emulator is stopped.
When a wad is installed make sure directories exist.
For the cmake build if a header is not provided in the check_lib macro don't check for it, and assume pkg-config was supposed to work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6581 8ced0084-cf51-0410-be5f-012b33b47a6e
allows using any (valid) memorycard.raw in any slot (including real memcard dumps)
Fixes issue 684.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6576 8ced0084-cf51-0410-be5f-012b33b47a6e
This comment should give a great speed increase, numerous games (SMG, NSMBW, DKCR, ...) which I tested are at least 20% faster now!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6574 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: Revert to the old EFB coordinate scaling. Glitches caused by higher EFB scales probably can't even be fixed properly in DX9, so let's not even mess with it...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6573 8ced0084-cf51-0410-be5f-012b33b47a6e
- I've implemented calling to ProcessFifoEvents when is there is a pending event in the main queue from CP, PE & GP
- I've implemented FifoIntReset(TRUE, TRUE) in write Clear Register.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6572 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix some compiler warnings.
On linux don't install the license.txt file. Most distributions handle license files via a package. For example on debian based systems this gives a lintian warning.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6568 8ced0084-cf51-0410-be5f-012b33b47a6e
the black screen in Sonic Colours. Both JIT and JITIL have this work-around.
Re-enabled ps_mul as that instruction was not the root cause.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6565 8ced0084-cf51-0410-be5f-012b33b47a6e
- Improved the GP Register Status: now this is all the time from the fifo loop.
- Improved the Interrupts manage:
1) Removed All UpdateInturrupts from CommandProcessor Writes and Read.
2) now the CP interrupts are schedule from the video thread and the fifo loop waiting until this happens
3) considering Inmediate mode for the CP interrupts
3) Implemented Interrupt CP Cache State
4) Implemented only Overflow interrupt in GatherPipeCheck because this need to be detected quickly.
- Implemented Overflow handling like a real HW, when Hiwatermark interrupt happens this write ClearRegister with True en HI and False in LO (FifoIntReset) after that a Control Register is writed and the FIFO is processed to LO Watermark.
- Removed all ugly code from LO and HI watermark manage
- Removed all ugly code from BP manage
- Change >= by == in the BP clauses
- Removed speed hack (1024 chunk) for better GP Status Control.
- Commented GXSetGPFifo very soon hack
- Commented FackWatchDog hack
- Commented FIFO_RW_DISTANCE = WritePointer hack
This is the beginning and the base for the future., If this broke your favorite game my apologize, only report this and will try solve it. If you have a Overflown don't worry, I've implemented the real solution code using the Overflow Interruption only need continue working for a perfect protection. Why I did it? Because is preferable a accurate and clean fifo instead hack y fifo for improve that. Thanks to DONKO for you awesome Video Plug in and skid for the chatting. PD: I have 7-10 fps more in the star fox video. bye :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6554 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix problems caused by EFB scales other than Native (excluding fractional!). Test whether this fixes games which work fine with native EFB resolution but show glitches with higher internal resolutions.
Also fixed numerous warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6549 8ced0084-cf51-0410-be5f-012b33b47a6e
Notable Changes:
Fixes right click menu in linux.
Fixes Issue 2412.
sram.raw file is no longer required to format a memcard
Update to use new ini sections, automatically remove default settings from ini file
enable pages setting no longer requires memcard manager to be reopened to take effect
it is no longer possible to switch to a negative page number
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6546 8ced0084-cf51-0410-be5f-012b33b47a6e
systems where size_t is typedef int.
It's either this or use the C99 %zu but while we can probably
safely assume C99 compilers, I am not at all sure that that's the
case for stdio libraries and this solution is fairly low-impact.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6535 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the default wiimote emulation mouse button settings on linux.
Fix a little c++ operator precedence issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6534 8ced0084-cf51-0410-be5f-012b33b47a6e
for the real wiimote thread as for the other threads.
Turns out we use OS X bluetooth API's that were introduced in 10.5.4.
Remove vestiges of previously removed wiiuse_set_bluetooth_stack().
XXX We should probably have a Common equivalent of htonl and friends.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6531 8ced0084-cf51-0410-be5f-012b33b47a6e
Most of the code dealing with the LogTypes namespace was C which lead to a
lot of nonsensical casting, so I have dumbed LOG_TYPE and LOG_LEVEL down to
plain C even though the move of wiiuse into Source means we don't currently
call GenericLog from C.
Set logging threshold to MAX_LOGLEVEL at startup so debug builds will also
p rint debugging messages before the GUI is running.
For some reason the way we use SetDefaultStyle doesn't play nice with wx 2.9
so we just get the default black text on a black background. Using a gray
background works around that problem, but I found it to also be much easier
on the eyes so I have switched the background color on all versions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6528 8ced0084-cf51-0410-be5f-012b33b47a6e
so the recent addition of VideoCommon/Src/Debugger.h clashed with
DebuggerWX/Src/Debugger.h.
The latter had atrophied anyway, so just get rid of it to resolve the
conflict.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6526 8ced0084-cf51-0410-be5f-012b33b47a6e
Separated UI from debugger functionality. Generally cleaned up that stuff.
Most functionality needs to be reimplemented now, but will be available to D3D9, D3D11 as well as OpenGL then.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6523 8ced0084-cf51-0410-be5f-012b33b47a6e
first fix for issues introduced in sms in r6501, please test for a regressions in The Calling
Second Fix for Issue 3539, by making pixel Dept calculation an option. in games with this issue Enabling pixel depth will solve the issue, in other games disabling the option will not cause speed lost
some cleanup in dlist cache
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6517 8ced0084-cf51-0410-be5f-012b33b47a6e
Replaces all occurrences of ftell and fseek with ftello and fseeko, respectively. This matters on non-win32 where only these names are altered by the _FILE_OFFSET_BITS define. Win32 still just maps the funcs to ftelli64/fseeki64.
Also add some File::GetSize I had skipped in my last commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6515 8ced0084-cf51-0410-be5f-012b33b47a6e
* I've fixed concurrency problem with fifo.bFF_GPReadEnable when the breakpoint is achieved
* I modified when fifo.bFF_Breakpoint is turn off to prevent that the interruption happens
* I reverted r6483
* I improved the commit r6495 adding another protection when the GPRead is enabled in CTRL_REGISTER
You can test Pokemon XD in dual core mode is more estable now :P This commit could solve others hangs fifo related in DKC, Sport Resorts, etc. I dont have these games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6503 8ced0084-cf51-0410-be5f-012b33b47a6e
Plus: I added a _assert_msg_ in FIFO loop when the WriteDistance is negative. Please if that happens report it, this can help to solve strange issues with wrong WriteDistances.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6495 8ced0084-cf51-0410-be5f-012b33b47a6e
ESI is not available as callee save register on linux 64, so use R12, which
is available on windows 64, too. The only callee save register still available on
all platforms is EBP, but i guess we don't want to fiddle with that one.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6492 8ced0084-cf51-0410-be5f-012b33b47a6e
10.0 level hardware can't create multisampled depth buffers which can be bound as shader resources as well, but we need that for e.g. EFB access or EFB copies.
Only multisampling the color buffer doesn't work either since color and depth targets must be using the same sample count.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6491 8ced0084-cf51-0410-be5f-012b33b47a6e
Return values from RunCycles isn't consistent/meaningful at the moment so assuming it runs as many cycles as asked.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6487 8ced0084-cf51-0410-be5f-012b33b47a6e
In this way it prevents wrong fifo.CPReadWriteDistance in the future. That should fix RE0 Issue 2846 and others "Warning: GFX FIFO: Unknown Opcode (0x4d)" in dual core mode.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6485 8ced0084-cf51-0410-be5f-012b33b47a6e
Also add the mask for ADPCM predictor, like r6480 does.
Tested 64 bit linux/windows. At least compiles for 32 bit windows, but
with these binaries most of my guest software fails with
DSPLLE(interpreted and jit) when it gets to do actual work.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6484 8ced0084-cf51-0410-be5f-012b33b47a6e
- Speed up MSAA by using custom resolve shaders instead of ID3D11DeviceContext::ResolveSubresource().
- Fix EFB access when MSAA is enabled.
- Implement the "force linear filtering" option.
- Compile shaders using shader model 4.1 or 5.0 if available.
- Some minor cleanups.
Who cares about DX9 and OGL anyway :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6481 8ced0084-cf51-0410-be5f-012b33b47a6e
Restricts 'ssbm' loop detection to PBs with valid loop pred_scale values.
Masked coef_idx in the adpcm code so it can't fault on invalid values.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6480 8ced0084-cf51-0410-be5f-012b33b47a6e
DX11: Fix a DX11 debug runtime error caused by the vertex shader output signature and the pixel shader input signature not matching if per-pixel lighting is disabled. Someone forgot disabling those pixel shader parameters ;P
DX11: Enable use of dynamic textures wherever possible.
DX9: Remove two unnecessary TODOs. Someone forgot removing those since they've been obsolete for a long time ;P
Anyway, at least working mipmaps and dynamic textures should increase DX11 performance a bit. And "a bit" is more than my usual "marginally" ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6473 8ced0084-cf51-0410-be5f-012b33b47a6e
Add multisampling support.
EFB access doesn't work with MSAA enabled, yet.
Additionally clean up some stuff, fix a memory leak, ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6468 8ced0084-cf51-0410-be5f-012b33b47a6e
* revert back to proper upscale mantissa of parameters A and C
* properly downscale magnitude to 0.24 bits instead than ≡0.23
* Z Eyespace conversion for projection by original patent concept
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6463 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add some info about a backend's feature set (MSAA, Real XFB, EFB to RAM, ..) to VideoConfig
- Gray out options if they aren't supported by the backend or if changing them doesn't affect anything (e.g. changing STC mode if STC is disabled)
- Allow signed bytes for D3D11. Not sure if this causes glitches, but it should work
- Call wxEvent.Skip() in the event function handlers, not sure if this fixes any bugs but the old code definitely caused bugs during development of this patch
- Fix a memory leak in the configuration dialog if D3D11 is used
- Other minor stuff that doesn't need to be mentioned or which I forgot
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6450 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix the macosx build (perhaps).
This changes the JitIL timed profiling to using assembly language to obtain the time. It does seem to be faster. Not sure if it will work on macosx, but if it does it has the necessary precision that gettimeofday does not have.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6448 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added an option to explicitly disable building with MPG framedumps. To use it add -DENCODE_FRAMEDUMPS=OFF to cmake on the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6429 8ced0084-cf51-0410-be5f-012b33b47a6e
Add a version check for avcodec and swscale libraries.
Fix a bug in the xlib wiimote emulation button configuration. If you are using a mouse button for wiimote emulation you may need to adjust your settings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6426 8ced0084-cf51-0410-be5f-012b33b47a6e
a little bugfix in vertex loading and some fixes.
not much time to work these days but at least i can spend a little time fixing thing.
please test for regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6409 8ced0084-cf51-0410-be5f-012b33b47a6e
Add a check to see if -Wno-unused-result is supported by the compiler.
Fix some compiler warnings in the wiiuse code.
Fix a bug in the wxGTK panic alert code.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6399 8ced0084-cf51-0410-be5f-012b33b47a6e
The C version of the GenericLog was being used in both C and C++ branches of the code.
Parent panic alerts by the main_frame so that those windows get the icon too.
Fix a couple of compiler warnings.
Added some checks for libraries in the cmake build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6385 8ced0084-cf51-0410-be5f-012b33b47a6e
Games that have higher frequency sounds and music should sound a bit better using 48k.
I don't have any games that use DTKMusic so that upsampling code untested. If you get strange sounds only at 48k try toggling dtk music to see if that isolates the problem and let me know.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6383 8ced0084-cf51-0410-be5f-012b33b47a6e
DX9: When clearing the back buffer in Renderer::Swap(), use IDirect3DDevice9::Clear instead of a clear quad if possible. Should improve performance marginally.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6373 8ced0084-cf51-0410-be5f-012b33b47a6e
Windows audio backend with lower latency.
Audio never glitches on my machine but the number of buffers may be set too aggressively. If you run into problems try turning up NUM_BUFFERS in the h file and leave some feedback.
From my tests games seem to prefer filling the buffer with smaller chunks. For this to work the callback that fills the buffer needs to either spin or run async so I went with async.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6371 8ced0084-cf51-0410-be5f-012b33b47a6e
First: Added a DESTDIR option for package building.
Second: Change the OpenCL setup. On both linux and windows use CLRun. I completely removed the option here. If CLRun works on MacOSX this should be done there as well, and this change implemented in the scons build also. Then we could remove the HAVE_OPENCL and the new USE_CLRUN definitions. Then we will finally have the dynamic detection of opencl set up cross platform.
On a side note, it doesn't seem that the program loaded from TextureDecoder.cl compiles or runs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6366 8ced0084-cf51-0410-be5f-012b33b47a6e
Also link the dolphin-emu executable against GL in the cmake build. Why? This seems to fix the segmentation fault on stop issue. Although curiously enough, linking the dolhpin executable against the system shared library SOIL fixes the problem too. It doesn't work with the static version of SOIL build in the externals. The reason the problem disappeared with the scons build is that the executable is implicitly linked against GL since the linker flags are set up to be thrown in everywhere.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6364 8ced0084-cf51-0410-be5f-012b33b47a6e
Also some general clean up of the main CMakeLists.txt file. I think it is nice to keep the checks and analysis of the results together.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6363 8ced0084-cf51-0410-be5f-012b33b47a6e
Not sure how to fix Dolphins hotkeys when 3D Vision is enabled (I do know a way, but it's messy and I don't want 3D Vision messing with Dolphin's cleanliness).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6362 8ced0084-cf51-0410-be5f-012b33b47a6e
- various fixes for using CMake on Windows
- support building external SDL, zlib, CLRun, wxWidgets
- support using precompiled GLew and WiiUse libs on Windows
For what it's worth, I'm not quite sure if I got all the wx files right...
Building with MSVC2008 still doesn't work yet, but is a lot closer now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6361 8ced0084-cf51-0410-be5f-012b33b47a6e
change the unit test to catch this bug if it turns up again and two more
zeroWriteBackLog() calls.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6356 8ced0084-cf51-0410-be5f-012b33b47a6e
Set scons build to autodetect OpenCL by checking for both the library and header instead of having an option. Unfortunately there probably needs to be a path variable that can be set to the location to look for the headers. For example on Ubuntu with nvidia, the headers are located in /usr/include/nvidia-current instead of /usr/include, and hence not found by scons.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6355 8ced0084-cf51-0410-be5f-012b33b47a6e
The finding was that 99% of the time, textures are static in memory. However, Dolphin would pessimistically continue to decode and copy the same texture every time. The optimisation is to check if the texture matches what is in the cache, and if it does, Dolphin should early exit.
The result is the speed in New Super Mario Bros Wii increased 35% with spinning coins. Still not as fast as EFB copy to texture though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6352 8ced0084-cf51-0410-be5f-012b33b47a6e
Note that most users will want to use the release build to get a -O3 optimized build. This can be enabled by adding "-D CMAKE_BUILD_TYPE=Release".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6344 8ced0084-cf51-0410-be5f-012b33b47a6e
I am officially killing the local/global build crap. The "local" build thing should never have existed. There is now only one build that is essentially what the "global" build was before. This is the way a proper build system should work. I will soon write a wiki page to describe how to properly use the cmake build system, and how you can still set things up to get the "local" build from before. However, that type of build should be considered a developer tool, and not the way that dolphin-emu should be built.
Briefly, to use cmake now do the following from the toplevel of dolphin's source:
mkdir Builddir
cd Builddir
cmake ..
make
make install (you may need superuser privileges)
Note that the scons build is still building dolphin in the old way.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6341 8ced0084-cf51-0410-be5f-012b33b47a6e
Added autodetection of shared libraries.
Added a check for Xrandr.
Fix OpenAL linkage.
Copy User and Sys directories to lower case in the binary directory.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6338 8ced0084-cf51-0410-be5f-012b33b47a6e
Also X11 is required on *nix systems.
GTK2 is required for building the wxWidgets builds on *nix systems.
Added a check for pulseaudio.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6334 8ced0084-cf51-0410-be5f-012b33b47a6e
Explanation of this commit: We only have to care about four BP registers in ClearScreen, the remaining API state should be reset. The colorEnable and alphaEnable parameters are obsolete, for some reason directly using them caused the SMS glitch with DX11 (because of that bpmem.zcontrol.pixel_format == PIXELFMT_RGBA6_Z24 check in BPFunctions.cpp, is this one actually correct?)
The comment in BPFunctions.cpp was at least misleading (if not even wrong), so I removed it.
For what it's worth, someone needs to port this to the OpenGL and Software plugins (unless they're doing this properly already)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6327 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
* Make writeToBackLog private to DSPIntExtOps.cpp
(JIT variants of 'l and 'ln are disabled and broken as is)
* Make zeroing of the backlog conditional on doing an interpreter fallback and
do it at a few more places
* Fix selection of cleanup for extended opcodes.
* Fix the DSP unit tests to correctly emit the function prolog/epilog
(else EBX wouldn't be saved)
* Add a few more DSP unit tests
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6325 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 3399.
Also remove unnecessary stateman/gfxstate applies:
- gfxstate->ApplyState/Reset only need to be called by VertexManager
- stateman->Apply only needs to be called before any Draw/DrawIndexed call
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6309 8ced0084-cf51-0410-be5f-012b33b47a6e
Upon texture reloading, the cache entry hash wasn't updated and thus we effectively disabled any texture caching in that case.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6308 8ced0084-cf51-0410-be5f-012b33b47a6e
Glenn Rice