Allows us to migrate off of printf specifiers and have more type-safe
formatting facilities. It also allows for custom type support as well.
fmt is also on track to have part of it standardized within C++2a, so
this will also lessen the transitional work necessary later on by
allowing new code to use it.
This simply adds the library but doesn't do anything with it yet.
On a few of our buildbot instances, we get warnings about the usage of
deprecated functions. We should correct these, especially if we're
delegating to system versions of the libraries if they're available.
However, in order to do that, we need to update our library variant from
2.1.1 so that the non-deprecated alternatives are actually available.
The CMakeLists file for the static zlib checks for presence of
unistd.h, but it doesn't properly define HAVE_UNISTD_H if it's found.
This change adds the necessary preprocessor definition if unistd.h is
found.
Upstream zlib handles this with by configuring zconf.h with CMake:
cacf7f1d4e/zconf.h.cmakein (L11)
Dolphin's static version of zlib doesn't do this, which is why setting
Z_HAVE_UNISTD_H in zlib's CMakeLists.txt isn't enough.
This probably wasn't noticed since because most *nix systems will use
the shared zlib. Force use of the static zlib (comment out
find_package(ZLIB) in the root CMakeLists.txt) and you'll see implicit
function declaration warnings during its compilation.
In some cases, this is required to avoid eventually getting a
USBD_STATUS_BAD_START_FRAME error back from the Windows USB stack.
This makes the libusbK code match the behaviour of the Linux backend.
It appears that the libusbK backend tried to get this behaviour by
setting StartFrame to 0. However, libusbK docs state that:
"Specifing 0 for KISO_CONTEXT::StartFrame (start transfer ASAP) is
restricted to the first transaction on a newly opened or reset pipe."
It's annoying to have source files automatically reformatted every time
Dolphin is built because it causes git to consider the source tree to
be dirty.
We already use a custom CMakeLists file for xxhash, so we can just make it's headers
public as part of its target interface.
This way, only libraries that link in the xxhash target will see its headers, as opposed
to every target under the top-level directory.
IsDeviceUsable in IOhidapi.cpp uses errno to detect if hid_write failed because of an unconnected Wiimote on a Dolphinbar (it expects errno == EPIPE in this case).
macOS’s implementation of hid_write detected this specific error (IOHIDDeviceSetReport returns kUSBHostReturnPipeStalled) but didn’t set errno so the check failed.
This add errno assignment to failure cases of macOS’s hid_write.
If available, use the system-generated unique ID for HID device paths instead of a transport/vid/pid/location tuple.
The Mayflash Dolphinbar registers four HID devices (regardless of the number of connected Wiimotes) which had the same path with the previous path building method, causing a bit of confusion when detecting and connecting to Wiimotes.
The unique IDs do not change if the computer is suspended and resumed, but do change if the HID device is unplugged/replugged.
A bunch of changes, looks mainly like bug fixes and code cleanup.
Notable changes:
- `cubeb_get_min_latency`'s signature was changed to take params via
pointer, requiring Dolphin code to be tweaked in two places.
- A fix for kinetiknz/cubeb#320, as reported by @shuffle2
- Fixed build on FreeBSD (kinetiknz/cubeb#344), as contributed by @endrift
* -Wno-unused-but-set-variable: only set this flag with gcc, otherwise
clang will issue warnings about the warning option being unknown :)
(-Wunknown-warning-option)
* -Wmissing-variable-declarations: clang warns about missing extern
declarations for non-static variables.
The latest version has tons of security fixes (which is expected for a
library such as mbedtls).
Updating also allows getting rid of a few deprecation warnings.
Check UsbDK availability at run time and activate UsbDk backend when
possible.
Fall back to current behavior when UsbDK not installed.
Signed-off-by: Dmitry Fleytman <dfleytma@...>
Signed-off-by: Sameeh Jubran <sameeh@...>
The usbdk backend is the only libusb backend that has official support
for isochronous transfers (which are required for Wii Speak,
microphones and cameras). And it's actively developed and maintained.
Compilers are very picky and don't use PCH when they have been compiled
with different flags. I even got some ICE in MSVC, so removing them for now.
Modules are the solution.
- The `PA_USE_{ASIO,WMME,...}` macros are no longer used, instead do
feature selection by compiling only the backends wanted.
- The `PA_WDMKS_NO_KSGUID_LIB` macro has been obviated along with the
link to ksguid.lib.
When on Linux and using libusb from Externals, and with libudev
available, an "undefined reference" error message appears at link time.
This is due to a wrong define being set in CMake for libusb with
libudev. This causes the code for netlink being used instead of the
correct code for libudev support.
Fix the issue by setting the correct define so the correct libusb code
is used.
1.0.21 adds a usbdk backend, which may be helpful as it could be
used in the future to work around the missing isochronous transfer
support for WinUSB backends.
Here is the full changelog (from libusb).
2016-10-01: v1.0.21:
* Core: Refactor code related to transfer flags and timeout handling
* Darwin: Ignore root hub simulation devices
* Darwin: Improved support for OS X El Capitan
* Darwin: Work around devices with buggy endpoint descriptors
* Darwin: Do not use objc_registerThreadWithCollector after its deprecation
* Darwin: Use C11 atomics on 10.12+ as the OS atomics are now deprecated
* Linux: Support preallocating kernel memory for zerocopy USB
* Linux: Deal with receiving POLLERR before all transfers have completed
* Solaris: Add solaris backend
* Windows: Add Visual Studio 2015 support
* Windows: Add usbdk backend
* Prevent attempts to recursively handle events
* Fix race condition in handle_timeout()
* Allow transferred argument to be optional in bulk APIs
* Various other bug fixes and improvements
This applies a patch that was merged into the mainline wxWidgets tree to
support label changing with wxToolBar. This originally only worked on
Windows and macOS, which is kind of annoying.
This is beneficial because it means that a tool doesn't have to be removed
and then reinserted into a wxToolBar instance in order to change the
label.
For more details, see ticket #17567 on the wxWidgets issue tracker.
On macOS, wxWidget’s tooltip.mm tries to include a system header with an improper capitalization (Appkit instead of AppKit), which causes the build to fail if the system headers are located on a case-sensitive filesystem.
Based on ca0c2efe7a. Credits go to flacs.
However, unlike the original commit, hidapi does not completely replace
the current implementations, so we can still connect Wiimotes with 1+2
(without pairing).
Also, it is only used on Linux and OS X for now. This removes the
advantage of having only one implementation but there is no other
choice: using hidapi on Windows is currently impossible because
hid_write() is implemented in a way that won't work with Wiimotes.
Additionally:
* We now check for the device name in addition to the PID/VID so we can
support the Balance Board and maybe third-party Wiimotes too. This
doesn't achieve anything with the DolphinBar but it does with hidraw.
* Added a check to not connect to the same device more than once.
This removes a Dolphin-specific patch to the wxWidgets3 code
for the following reasons:
* Calling wxWindowGTK::DoSetSize on a top-level window can end up
calling wxTopLevelWindowGTK::DoMoveWindow, which triggers an assert
because it is not supposed to be called for a top-level wxWindow.
* We should not be patching the wxWidgets code because that means the
toolbars will still be broken if someone builds without using the
WX that is in our Externals.
Instead, we now use a derived class for wxAuiToolBar and override
DoSetSize() to remove the problematic behaviour to get the same effect
(fixing toolbars) but without changing Externals code and without
causing asserts and other issues.
Dolphin no longer lowers itself below the top window when opening.
Dolphin no longer draws garbage lines all over the game list.
Use the correct platform macros so Dolphin can actually find the
translation catalogs on Unix.
- Externals/soundtouch/CMakeLists.txt: add -w (since it's not our code) to
silence an unused variable warning
- Source/Core/Core/NetPlayClient.cpp: Work around a Clang/libc++ bug where
initializing a std::array the way the standard says you're supposed to produces
a warning. (libc++'s implementation of std::array, like any sane
implementation, has a C array as a field, so the most explicit form of
initialization would use two braces, one for the struct and one for the array.
Clang has a general warning for not being explicit with braces, which is
usually sane. But the standard only guarantees that initializing std::array
works with a single pair of braces!) There are other places in Dolphin that
incorrectly use double braces, presumably to avoid the warning, so maybe the
warning should just be turned off, but in any case here I just switch to an
equivalent .fill().
From wxWidgets master 81570ae070b35c9d52de47b1f14897f3ff1a66c7.
include/wx/defs.h -- __w64 warning disable patch by comex brought forward.
include/wx/msw/window.h -- added GetContentScaleFactor() which was not implemented on Windows but is necessary for wxBitmap scaling on Mac OS X so it needs to work to avoid #ifdef-ing the code.
src/gtk/window.cpp -- Modified DoSetClientSize() to direct call wxWindowGTK::DoSetSize() instead of using public wxWindowBase::SetSize() which now prevents derived classes (like wxAuiToolbar) intercepting the call and breaking it. This matches Windows which does NOT need to call DoSetSize internally. End result is this fixes Dolphin's debug tools toolbars on Linux.
src/osx/window_osx.cpp -- Same fix as for GTK since it has the same issue.
src/msw/radiobox.cpp -- Hacked to fix display in HiDPI (was clipping off end of text).
Updated CMakeLists for Linux and Mac OS X. Small code changes to Dolphin to fix debug error boxes, deprecation warnings, and retain previous UI behavior on Windows.
PolarSSL has been renamed to "mbed TLS" and version 2.0 dropped backwards
compatibility. This commit adds only the necessary files without any
modifications, so it doesn't compile yet.
If we don't unset it, all the CMake checks will run with PortAudio
in the library list. This didn't affect those who had PortAudio,
but for select Debian systems without it, it breaks everything.
- all files converted to unix line endings
- files from other subsystems and most of system have been removed
- include/SFML/System.hpp and include/SFML/Network.hpp modified to
not include removed stuff
- IpAddress.*pp renamed to IPAddress.*pp to workaround git apply bug
with case-only renames
There were some fixes back on March 13th, 2014 for fixing compiling on MIPS64.
Also some fixes on June 25th, 2014 for SPARC64 fixes.
Probably more things, but those are what I care about.
Note warnings may still be generated by code in Externals if it is included into warning-enabled code (this is the case for libusb).
Also, quiet an intellisense warning in wxWidgets caused by using __w64 for an inapplicable type.
This moves the Gekko disassembler to Common where it should be. Having it in the Bochs disassembly Externals is incorrect.
Unlike the PowerPC disassembler prior however, this one is updated to have an API that is more fitting for C++. e.g. Not needing to specify a string buffer and size. It does all of this under the hood.
This modifies all the DebuggingInterfaces as necessary to handle this.
Should be GetGPRName not GetGRPName.
Removed an unnecessary extern declaration of GetGRPName in RegisterWindow.cpp.
Also added GetFPRName to the PowerPCDisasm header for consistency.
- strip down PolarSSL's CMakeLists.txt
- switch to the PolarSSL 1.3 API
- use entropy interface instead of havege (PolarSSL 1.3 has disabled
havege by default because it is "considered unsafe for primary usage")
- add VS2013 .vcxproj file
I just removed Externals/polarssl/, added the new version, then deleted
the following files/directories:
DartConfiguration.tcl
Makefile
doxygen/
library/Makefile
programs/
scripts/
tests/
visualc/
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
Shawn Hoffman