For older distribution you can still use SDL1.2
./build.sh ... --sdl12 ...
or
cmake ... -DSDL2_API=FALSE ...
Note: there is a hard dependency between WxWidget and SDL. If Wx is linked against
SDL1.2, you must use SDL1.2. Crashes are expected otherwise.
Fixes a cmake detection problem when compiling with clang (3.7.0 in my
case). clang outputs the error "Invalid argument '-std=c++11' not allowed
with 'C/ObjC'", which causes lzma, Xext and other things to be
considered "not found".
Helpful for dropping dependencies package dependencies.
- Git only needed if there is a .git folder
- bzip2 only needed by CDVDiso
- CG/GLEW was for zerogs and ZZogl
- jpeg was for ZZogl
.
I also added that EGL_API is also for GSdx in option comment.
Debian has a goal to make reproducible builds therefore make it an
option instead of distro specific.
.
I added an "OR openSusE" to not "break" the old openSUSE behavior but ideally
they should just use -DDISABLE_BUILD_DATE=TRUE instead.
.
The old -DopenSUSE is not used for anything else so I removed it.
Sadly, no time to maintain it neither to improve it.
Note: I think new openGL 4.x feature would make the plugin faster
Anyway, now GSdx-ogl is probably better than zzogl
find_package(Git) is done in SearchForStuff it could be deleted over there
but it fits better there. The only thing this line did was saying git was
not found for a second time since if it was found then it never triggered.
.
Check for the existance of .git to avoid
fatal: Not a git repository (or any of the parent directories): .git
The goal is to reduce the burden for new architecture port.
Patch is mostly inspired from 3kinox initial patch. The diff are
*/ used ifdef instead of raw removal
*/ gui don't rely on UseMicroVU* option
*/ completely remove sVU_micro.* file
* GTK3_API requires a wxWidget that support it too
=> avoid complexe compilation error
* SDL2_API requires a wxWidget without SDL support (wxUSE_LIBSDL = 0)
=> avoid run time crash
SDL check hypothesis: wx is linked against SDL1.2 and not SDL2. It would need to be improved on a distant future
This fixes it for build.sh and when not using build.sh (packaging).
.
Also fix native 32bit build which should also be broken and attempt to
predict the future and fix it for lib32-wx3.0. Worst case the filenames
have to be fixed which is trivial.
.
When wx2.8 support is dropped then only the lib32-wx3.0 IF should remain.
When crosscompilation support gets dropped then the first IF gets deleted
unless we also dropped wx2.8 support then everything gets deleted.
I only had to add "PATH_SUFFIXES SDL2".
.
include is superfluous
SDL2-2.0 is a distro specific convenience symlink. Use the correct one
as before.
.
I probably did this as an artificial way of disabling pkgconfig when cross
compiling and before disabling pkgconfig for all cross compiling but it's
wrong. I thought I had fixed this already.
User may forget or not know about -DUSE_CLANG=TRUE. It could probably
be always autodetected instead of requiring user input.
.
Trivial wording changes to compiler_version.
Tell the user to use CMAKE_TOOLCHAIN_FILE upon failure.
.
Cleanup detectOperatingSystem. Should be the same but adding
GNU and kFreeBSD from Debian and filtering out pre OS X Apple.
.
libaio is linux only. Also check for the correct header since
aio.h is the POSIX one. Both are in /usr/include/ anyway.
Only build core if (Linux AND NOT AIO_FOUND) == false.
.
Use Unix for GTK and X11. Macs has gtk-quartzs and xquartz or native X11.
*BSD, linux, etc should have both.
Even before this pull request it was required to set PKG_CONFIG_PATH
when cross compiling since pkg-config always searches for native
libraries. This would require to backup an already existing ENV
variable if present, detect the distro specific place the pkgconfig folder is,
and restore the original ENV variable if it was present. Cmake as shown in:
.
http://www.cmake.org/gitweb?p=cmake.git;a=commitdiff;h=3df51470
.
added support for this but requires CMAKE_MINIMUM_REQUIRED_VERSION as 3.1
which is kind of strict since it was released 10 days ago.
.
To avoid the ugliness let just avoid pkg-config when cross compiling. This
means only EGL, SDL2 and GTK3 have to be updated since the rest work w/o
pkg-config.
- EGL is fixed with PR #409
- SDL2 is fixed here and it's trivial.
- GTK3 is non-trivial. For this one use pkg-config for native builds since
the .pc file is kept up to date automatically. For cross compilation
use the provided FindGTK3 which I made by using the sed documented
inside the file and updating the dependencies for GTK3. Since I checked
each and every single .pc file to make sure they are up to date this
should have the same behaviour as pkg-config. Prefer the .pc files for
native builds since it does not need to be manually updated and when
the native 64bit port gets finished all the cross compile options should
be removed which is quite easy since most of the code got moved to the
CMAKE_TOOLCHAIN_FILE.
Note:
Cmake Modules are BSD-3-clause therefore GPL compatible.
The obtained binaries before and after this commit are identical (sha1sum)
when compiled in Debian/Ubuntu/Fedora/ArchLinux.
.
The linker will always pick the 32bit libraries the only thing this does is
make sure we have all the 32bit dependencies installed. Basically we avoid
detecting the 64bit libraries and telling the users the 32bit libraries were
found. We always link with 32bit libraries therefore this avoids having to
wait 5-10min to just be told -lXXX is missing.
.
The only thing really needed are
set(CMAKE_LIBRARY_ARCHITECTURE "../lib32")
set(CMAKE_LIBRARY_ARCHITECTURE ".")
.
which basically ensures we don't pick 64bit headers since
CMAKE_LIBRARY_ARCHITECTURE always gets tested first and for some reason
FindGTK2 test searches lib64 first then lib32/lib. These values are hardcoded.
Right now these arch specific headers are not used but can't say this will
always be true.
.
FIND_LIBRARY_USE_LIB64_PATHS is not needed for native builds and it's covered
by CMAKE_SYSTEM_IGNORE_PATH.
.
NOTE:
We filter out lib32 because multilib is not compatible with multiarch.
- Fedora only needs --arch if cross compiling.
+ It's only used to select libdir so i386=i686=i986
- Messages are nice to debug build logs.
.
Everything seems to work unless some other distro broke. Other
distros need to add CMAKE_TOOLCHAIN_FILE or --cross-multilib if
they cross compiled amd64 -> i686.
- Update the build.sh and fix some typos.
+ Don't add the OSX ones because I have not tested them and it won't
even build anyway due to the libaio dependency. Needs to use POSIX AIO
or something else.
- They are rather simple and all the magic happens in two lines.
+ First line tells cmake to get ready to compile FOR linux or darwin.
It also sets CMAKE_CROSSCOMPILING to true which is the only way to
let cmake known that we are using stuff not from the host.
+ CMAKE_C_COMPILER/CMAKE_CXX_COMPILER are basically used to detect
the architecture of the target. Since I used generic cc/c++ the
hardcoded -m32 is needed to ensure we get TARGET=i386. Also
since I hardcode -m32 and use c++/cc it's to be noted that
we can only do i386->i386 (trivial), amd64 -> i386, and x32->i386.
.
Using something like i586-linux-gnu-{gcc,g++} would also work and
enable arm -> i386, etc but it's infeasible and impractical to do all
the combinations. File is simple enough that a distro or user can
create their own and cross compiling is rather tedious compared
to using a chroot to compile it.
- I tested it in Debian with "dpkg-buildpackage -ai386" but installing the
build dependencies was rather tedious.
http://www.vtk.org/Wiki/CMake_Cross_Compilinghttp://www.cmake.org/cmake/help/v3.0/manual/cmake-toolchains.7.html
.
The official way that cmake does cross compiling is via the use of a
CMAKE_TOOLCHAIN_FILE. This has to be given by the user and can't be
included from within a Cmake file since setting up the toolchain has
to be the first thing that happens.
.
After the file is given and validated cmake behaves nicely and all the
workarounds and hacks are not really needed anymore.
.
The consequence of this change is that without this file cmake will
try to build for the HOST architecture as expected and with the file
it will build for the TARGET architecture of the given toolchain. Due to
this remove 64BIT_BUILD_DONT_WORK and just ERROR out if the user tries
in the same way as before.
Currently crosscompiling was broken since we detected the cpu of the host
not of the target. Building arm -> i386, i386->amd64, etc resulted in
interesting stuff.
.
CMAKE_HOST_SYSTEM_PROCESSOR and CMAKE_SYSTEM_PROCESSOR should have done this
but they are incredibly broken and unreliable. I use
CMAKE_HOST_SYSTEM_PROCESSOR just to retain the format of the old message
and is not used for critical stuff so it does not matter.
.
This code also allows scalability so that if one day in the very distant
and unlikely future the x86/x86_64 specific code gets made portable
by replacing asm/MMX/SSE*/AVX/etc code with generic/portable code then
it also would work on all architectures.
.
For *BSD/OS X it probably would need to use POSIX AIO instead of linux
specific libaio but that is a different issue.
.
Error out the x86_64 builds.
Also the 64BIT_BUILD_DONT_WORK option became obsolete more info in following
commit.
- Update copyright due to incoming changes.
- Don't support universal binaries until they actually work therefore
only allow 1 architecture in CMAKE_OSX_ARCHITECTURES.
- Don't allow an empty ARCH list.
We probably asked for ppc or ppc64 w/o support for it.
For now just dump the original and add the BSD-2-Clause.
.
It's GPL compatible so it's okay.
.
I was writting one myself but found this one and it handles apple
which I did not consider since I can't test it.
EGL sometimes is not found. Checklib 1st does
.
string(TOLOWER ${lib} lower_lib)
pkg_search_module(${var} QUIET ${lower_lib})
.
Therefore this part should be equivalent since we always compare lower.
.
This part seems to not find anything and then it does.
.
find_library(${var}_LIBRARIES ${lib})
.
Here it also does not find anything since it tries to find libegl
while the library is called libEGL therefore I changed the name to upper.
to avoid
_internal_message("-- ${lib} not found (miss lib)")
.
It could fail in the unlikely event that someone renamed libEGL to libegl.
This bug is triggered when you combine crosscompiling from amd64 to
i386 with Debian multiarch paths. For other distros it should work with
pkg_search_module normally.
Namely GTK3_API and 64BIT_BUILD_DONT_WORK
The former was barely tested and doesn't compile with standard wx
The latter doesn't work at all
Note: I was very close to disable SDL2 too. If wxWidget was built with
SDL1 support it will crash
Description: Building with SDL2_API=TRUE is incomplete
SDL_FOUND does not imply SDL2_FOUND
Use check_libs for detection
Only include ${SDL_INCLUDE_DIR} when needed
Use SDL2_LIBRARIES
Author: Miguel A. Colón Vélez
Gregory: add back SDL_BUILDING_LIBRARY
+ Wx3.0 fixes various issue on linux (better sizing of box)
+ Debian doesn't provide wx2.8 anymore. Ubuntu will probably follow soon (close issue #342)
If you want to use wx2.8:
* Either you remove wx3.0 from your system
* Either you use the cmake option -DWX28_API=TRUE
Please don't hesitate to report any regresions.
I need to check carefully the consequence of ABI change. So far wx is very unhappy!
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6),
and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1006,wx containers,compatible with 2.6).
* link common with c lib (required for gold linker)
* fix the macro to properly set the library variable
=> use the variable instead to hardcoded value
Fixes RPMLINT warning:
pcsx2.i586: W: file-contains-date-and-time /usr/bin/pcsx2
Your file uses __DATE and __TIME__ this causes the package to rebuild when not needed
* disable unused value warning (don't like the syntax 0&&)
* remove -Wno-ignored-attributes (c option). It replaces gcc warning
by an unsupported option warning...
GCC doesn't support pentium4 as a arch target for x86_64. It complains that the architecture doesn't support x86_64
Which to be fair the first few models didn't support 64bit.
Just remove the architecture setting since there isn't a need for it.
Move build configuration from CMakeLists to cmake/BuildParameters.cmake where it belongs
Use option syntax for on/off option
Complete a bit previous commit to force all 64bits path detections (likely done by cmake)
By default the cmake build will still cross compile a 32bit binary and spout a message about it if not enabled.
This doesn't fix the 64bit build issues, just makes it easier for someone to test 64bit builds in the future.
Look towards a bright future instead of a dark and gloomy past
* avoid compilation failure when git -C isn't supported
* don't print missing dependency when EXTRA_PLUGINS isn't activated
* sed /endif(.*)/endif/ because I don't like it
--extra for ./build.sh script
By default only build the pricipal plugin: GSdx|zzogl/spu2-x/onepad/UsbNull/Dev9Null
Extra plugins are: GsNull|zzogl-cg/Spu2Null|zerospu/PadNull
The purpose is to improve compilation time on linux
cmake: don't strip by default the binary in release mode
gsdx: disable the regeneration of ogl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5806 96395faa-99c1-11dd-bbfe-3dabce05a288
* new option SDL2_API
* drop GLSL_SHADER_DIR. Useless, shaders are embedded in .h file
* use some hardening flags (for the moment only basic one)
onepad:
* port the code to SDL2 (Note only SDL1 is supported for the moment)
* improve detection of button vs axis (long-standing issue)
* avoid potential overflow on mouse mouvement detection
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5756 96395faa-99c1-11dd-bbfe-3dabce05a288
František Zatloukal