Commit Graph

67 Commits

Author SHA1 Message Date
Jonathan Li 869f4d1898 gsdx: Only set ini path in GSdxApp::Init() if it's empty
Fixes a regression introduced by 46ba9aa117,
where the Linux GS replayer would always use the options in inis/GSdx.ini
(or use the default options if that doesn't exist) to replay the dump,
instead of using the GSdx.ini from the specified ini folder.
2016-08-04 00:53:50 +01:00
Jonathan Li 46ba9aa117 gsdx: Defer GSdxApp initialisation on Linux only
vector push_back causes a SIGILL signal on a Nehalem (SSE4.2) QEMU VM
when compiled with GCC 6.1.1.

However, an empty constructor causes illegal instruction exceptions to be
generated on a Windows VM.

So here's an inbetween that looks stupid but works on what I've tested.
2016-07-27 23:34:15 +01:00
Gregory Hainaut 79587215bb gsdx ogl: add the option force_texture_clear for test purpose
Might be completely useless.

1 => always clear framebuffers and textures to black (aka 0)
2 => always clear framebuffers and textures to red
2016-06-24 18:41:55 +02:00
Akash fdc10e13ec GSDX: Better detection of default renderer
* Better detection of default renderer based on the vendor ID ( Nvidia, AMD , Intel)
* GSUtil: Add a dedicated function for identifying best renderer
2016-06-09 15:27:11 +05:30
Gregory Hainaut 43a1c48f75 gsdx option: add missing default and fix case 2016-05-30 18:23:22 +02:00
Gregory Hainaut 38a511e3e1 gsdx linux: some capture options are cross platform 2016-05-29 17:38:40 +02:00
Gregory Hainaut 453ac88dce gsdx option: use CaptureWidth/CaptureHeight on linux too 2016-05-28 10:07:27 +02:00
Gregory Hainaut a9c18c57e4 gsdx option: use the new GetConfig* function
v2:
add PSX stuff
ssakash review
2016-05-28 10:07:27 +02:00
Gregory Hainaut 03a6f2093e gsdx option: add multiple GetConfig to avoid overload issue 2016-05-28 10:07:27 +02:00
Gregory Hainaut 05818d70f4 gsdx option: centralize default configuration to a single file
Potential issue
* miss a default value
* Renderer is DX9 again on windows
* Case issue
* Same default for all code paths
* overload of GetConfig

v2: separate specific OS option
2016-05-28 10:07:26 +02:00
Akash 2409817556 GSDX: Move PSX code to an isolated path 2016-05-26 19:04:17 +05:30
Jonathan Li 571432a7aa gsdx:freebsd: Fix compilation 2016-05-21 13:34:18 +01:00
Akash 21e6a344a2 GSDX: Improvements to the GSDX dialog (#1284)
GSDX: Improvements to the config interface.

- GSDX: Add new logos to dialog
- GSDX: Remove all the extra null renderers
- GSDX: Changes to renderer combobox
- Sort all the renderers in ascending order. (the fact that D3D11 was
above D3D9 really annoyed me >_<)
- Properly display usage of D3D10/D3D11 on the combobox.
- Use highest available version of DX by default.
- GSDX: gray out upscaling hacks at native resolution
- GSDX-PSX: Modifications to the dialog
- Add new logos
- Remove SDL renderer from combobox since it was removed long ago.
2016-05-01 17:33:53 +01:00
Gregory Hainaut b5ec683318 gsdx-linux: remove custom resolution from the GUI
It would be replaced by a float resolution factor
2016-04-21 09:28:44 +02:00
Jonathan Li 0f11838d93 gsdx: s/_WINDOWS/_WIN32/
It's the proper Windows preprocessor macro.
2016-01-27 22:41:45 +00:00
ramapcsx2 d84d765aeb whops 2015-12-30 18:53:38 +01:00
ramapcsx2 8e3aec8aaf gsdx dialog: renderer order and naming changed. due to many factors, we can't yet remove any of the software options. naming / order changes are possible though, if a majority votes for it. 2015-12-30 18:06:54 +01:00
Gregory Hainaut ac0d7f74cf gsdx: reorder renderer config code & fix linux gui
Group all DX option into a unique section (avoid tons of ifdef)

Rename Null renderer as "None (Core Benchmark)"
2015-12-27 11:24:05 +01:00
ramapcsx2 3210740872 Patch by r5 that reorders renderers in GSdx' config dialog. Also removes some redundant options. 2015-12-21 19:30:03 +01:00
Gregory Hainaut 077f06562f gsdx-linux: use standard code for the renderer box
Fix the openCL issue and code is cleaner
2015-12-20 19:33:39 +01:00
Gregory Hainaut b1d7f0e3fd gsdx: remove openCL from the ini if it isn't enabled 2015-12-14 10:00:28 +01:00
Gregory Hainaut a41308e8c3 gsdx-linux: add a gui option for the tv shaders 2015-11-20 17:36:03 +01:00
willkuer 9245d3ed7e gsdx: RendererEnum
1. Add GS_Renderer Enum

Replace all instances of int/uint32 renderer identifier by a strongly
typed enum and appropriate casts.

Only instances in GS[*].cpp/h classes were touched. GPU[*].cpp/h classes
do not to follow the same convention.

2. Add default renderer according to OS

The default renderer is OS dependent (Win -> Dx9HW, others -> OGLHW).
Consequently one should always check againt the appropriate default
value on config load.

The old behaviour was only - if a at all - problematic if the respective
element in the gsdx.ini was missing and probably even then didn't create
issues. The current implementation is still more stable and does not
depend on the implementation of GS.cpp -> GetConfig()
2015-11-10 00:26:39 +01:00
Gregory Hainaut c4a3d57499 gsdx: protect fscanf string read
Coverity:
CID 146816 (#1 of 1): Calling risky function (DC.STREAM_BUFFER)
dont_call: fscanf(FILE *, char const *, ...) assumes an arbitrarily large string, so callers must use correct precision specifiers or never use fscanf(FILE *, char const *, ...)
2015-09-23 09:39:09 +02:00
Avi Halachmi (:avih) 3f81fc98dd gsdx: custom resolution - use 0 instead of 9 2015-09-22 01:00:53 +03:00
Akash a9b0cfc519 GSDX: Add 8X native to Internal resolution. 2015-09-20 07:49:32 +05:30
Akash b97018932d GSDX: Rework Internal Resolution function
upscale_multiplier function values have been changed to allocate native resolution and also move custom resolution to 9.
Remove the old native checkbox value and include Native in the combo box.
Internal GSDX functions have also been updated with this new update to the upscale_multiplier variable.
2015-09-14 10:26:27 +05:30
Jonathan Li 55adc7e728 gsdx: tooltip description formatting and minor fixes
The hack description box messages were replaced by tooltips on Windows,
so there is no need for the first line in the description to refer to
the hack anymore.

3-state checkboxes were also converted to comboboxes, so remove any
references to checkbox states.

Reformat the descriptions so it looks okay on both Windows and Linux.
Could be better, but I'm out of ideas.

Also fix a few typos and missing punctuation.
2015-09-01 19:25:27 +01:00
Akash 3c9ca799a6 Remove anisotropic filtering checkbox value.
Removes the checkbox of Anisotropic filtering from the GSDX plugin settings, the checkbox was usually used to enable & disable the AF which is not necessary since there is an option in the drop down list for disabling AF.
the internal function value of "AnisotropicFiltering" has been replaced with "MaxAnisotropy" for detection.
the detection uses the function getconfig("MaxAnisotropy", value)  where value 0 means disabled and value is the default value when no value is set in the INI file.
2015-08-21 09:45:00 +05:30
Gregory Hainaut a0edcb58af gsdx-ogl: extend cclip blending level with destination alpha blending
The purpose is to emulate correctly destination alpha factor

An alpha channel of 128 is 1.0 in the GS but only ~0.5 in the GPU

I think few draw call use destination alpha so impact on perf must remains small.
2015-07-31 09:45:28 +02:00
Gregory Hainaut caadc73e1b gsdx-ogl: add a new level for accurate blending
The updated medium level will run for all sprites. It helps sotc blooming effect and it remains
fast enough to be enabled by default (at least on 3D games)
The new high level will run for all sprites + color clipping
2015-07-30 18:21:01 +02:00
Gregory Hainaut b632b2a478 gsdx-linux: add a new combo box to select the blend accuracy level 2015-07-30 18:21:00 +02:00
Gregory Hainaut 1be8d07f85 gsdx: auto CRC management
Old way various check boxes to configure the plugin

New way an unified drop down list

* Level 0 (dev only) => disable (mostly) all hacks and auto skip depth.
* Level 1 (dev only ) => enable oi/oo/cu hacks, others remains disabled
* Level 2 (GL) => enable most hacks except a couple of one that were fixed on openGL (speed impact)
* Level 3 (DX) => enable all hacks
* Level 4 => enable also aggresive CRC

Note: windows gui must be updated, and it will be nice to create a global tooltip
2015-06-14 10:27:02 +02:00
Gregory Hainaut fda746ff93 gsdx-gui-linux: support 3 states hack options
Based on a Combo Box on linux. As good as 3 states check buttons
2015-05-07 22:13:49 +02:00
Gregory Hainaut e6560f348e gsdx: add vector option for linux & openGL 2015-05-07 22:13:49 +02:00
Gregory Hainaut 4773bcf0ea cmake: s/_LINUX/__linux__/ 2014-12-20 10:54:24 +01:00
Gregory Hainaut 4238261784 gsdx-cl: update linux menu config
Try to use some id to be more robust

The best will be to sort the array first
2014-12-02 00:16:35 +01:00
gabest11 7b466a98d0 replaced opencl.def with dynamic dll loading, god bless search and replace 2014-12-02 00:16:35 +01:00
gabest11 e3ba15de94 opencl device selection in settings dialog 2014-12-02 00:16:34 +01:00
gabest11 db7c26cde7 - Experimental OpenCL renderer (missing features: point, line, texture cache, mipmap, aa1, device selection). Needs any OpenCL SDK for the common headers and stub lib to compile, tested with AMD and Intel. Too bad it is not part of the Windows SDK yet.
- Renumbered renderer ids, compatible with old numbering, but it does not follow the mod3 logic anymore.
2014-12-02 00:16:33 +01:00
Asmodean.pcsx2 42b879e6b8 GSdx: Anisotropic Filtering.
Fixes a small oversight on my part. Which was setting the maximum anisotropy to (0,1,2,3,4) respectively, instead of (1,2,4,8,16). So when you selected x16 for example, you were actually only getting x4 >.>

Corrected now, and you will be getting the full x16 when selected :)

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5879 96395faa-99c1-11dd-bbfe-3dabce05a288
2014-02-03 20:06:00 +00:00
Asmodean.pcsx2 b8f8459275 GSdx: Anisotropic Filtering.
Adds anisotropic texture filtering (1x-16x) to the hardware settings. Enhances the visual quality of textures that are at oblique viewing angles.

Anisotropic filtering is automatically disabled if: 8-bit textures are enabled.


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5878 96395faa-99c1-11dd-bbfe-3dabce05a288
2014-02-03 16:58:11 +00:00
gregory.hainaut 44d8301bb2 spu2x: array out of bond (-1)
Performance note, it might be faster to replace the MODULO with an AND. Not sure on the impact
for the new time stretcher algo.

GSdx: fixed use-after-free (linux)

PCSX2: 
* add a define to support address sanitizer (both rely on 0x20000000-0x3fffffff memory ranges..)
* sio_buffer out of bond (-1). Maybe we can move the flush in the 2 if previous branch. It would
avoid the extra test.
* wxGetEnv (linux) generates double free (maybe not thread safe). Cache the result so it doesn't crash 
anymore when switching renderer

Comment/Review/Improvement are welcome :)




git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5727 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-09-10 11:41:11 +00:00
gregory.hainaut 91e74637d5 gsdx-ogl-wnd:
* update linux dialog: create a custom shader box and put it Shade boost and Fxaa
* force the reloading of the inifile after any configuration update.


git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5666 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-06-15 15:03:44 +00:00
gregory.hainaut 5e4bae5f5d gsdx-ogl-wnd: * add a preliminary context and wgl management
Note: don't expect to compile/work yet


git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5502 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-01-04 21:33:24 +00:00
gregory.hainaut e06484adb8 gsdx: update the copyrigh address thank to sed
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5412 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-09-09 18:16:11 +00:00
gregory.hainaut 81cc4d51da GSdx, linux: remove some letf-overs
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5408 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-09-08 16:06:44 +00:00
gregory.hainaut 55ba4477ca gsdx: remove sdl and ogl from the win32 dialogs
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5268 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-06-04 18:45:54 +00:00
gregory.hainaut 46838ca4ee gsdx: merge the opengl branch to ease futur development and allow GSdx by default on linux
* for the moment only the SW render is supported, hopefully HW will come some day. And linux only for the moment.
* Require an OpenGL3 GPU (==Dx10) ie Nvidia >= 8800, AMD >= HD2000)
* Require an OpenGL4.2 compatible drivers => no opensource driver supported neither Intel driver.
* Build by default without SDL support which will dropped later. You need to add this define "ENABLE_SDL_DEV" on Win.



git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5186 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-04-28 15:24:02 +00:00
gregory.hainaut 300ea42977 gsdx-ogl: sync from trunk 5179:5091
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5180 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-04-26 19:51:07 +00:00