This sends arbitrary packets in chunks to be reassembled at the other
end, allowing large data transfers to be speed-limited and interleaved
with other packets being sent. It also enables tracking the progress of
large data transfers.
Switch to using additional overloads of sf::Packet, so we can eliminate
some of the messy code and just use the normal syntax for
BigEndianValue.
We can't avoid helper functions with u64 due to SFML's non-standard way
of defining 64-bit integer types.
Prior to this commit, the emitter would unconditionally emit a 10-byte
instruction known as MOVABS when loading a 64-bit immediate to a
register.
0: 48 b8 ef be ad de 00 movabs rax,0xdeadbeef
7: 00 00 00
With this change, it will instead rely on the fact that on x64 writes to
32-bit registers are automatically zero extended to 64-bits, allowing
us to emit a 5 or 6-bytes instruction with the same effect for certain
immediates.
0: b8 ef be ad de mov eax,0xdeadbeef
Prior to this commit, the emitter would unconditionally emit a 10-byte
instruction known as MOVABS when loading a 64-bit immediate to a
register.
0: 48 b8 ef be ad de ff movabs rax,0xffffffffdeadbeef
7: ff ff ff
With this change, it will instead emit a 7-byte instruction when it is
possible to express the 64-bit immediate using a signed 32-bit value.
0: 48 c7 c0 ef be ad de mov rax,0xffffffffdeadbeef
The LogManager code had trouble detecting the "/Source/Core/" substring
for two reasons, neither of which seemed to happen a few years ago:
1. __FILE__ is in lowercase on MSVC
2. __FILE__ uses backslash as the directory separator on MSVC
Fixes https://bugs.dolphin-emu.org/issues/11366
Similar in nature to e28d063539 in which
this same change was applied to the x64 emitter.
There's no real requirement to make this const, and this should also
be decided by the calling code, considering we had places that would
simply cast away the const and carry on
Added an option in General config to enable/disable usage statistics. Added a popup on first open if
the user would like to engage in reporting. Clicking cancel or out of the box opts out. Only
clicking 'Ok' will enable reporting. Also added a new android specific values to report.
Type punning like this is undefined behavior. Instead, we use std::memcpy to
copy the necessary data over, which is well defined (as it treats both
the source and destination as unsigned char).
This adds the functionality of sending the host's save data (raw memory
cards, as well as GCI files and Wii saves with a matching GameID) to
all other clients. The data is compressed using LZO1X to greatly reduce
its size while keeping compression/decompression fast. Save
synchronization is enabled by default, and toggleable with a checkbox
in the NetPlay dialog.
On clicking start, if the option is enabled, game boot will be delayed
until all players have received the save data sent by the host. If any
player fails to receive it properly, boot will be cancelled to prevent
desyncs.
Previously these were required to be built into the executable so that
the JIT portion of the DSP code would build properly, as the
x86-64-specifics were tightly coupled to the DSP common code. As this is
no longer the case, this is no longer necessary.
Makes the enum values strongly-typed and prevents the identifiers from
polluting the PowerPC namespace. This also cleans up the parameters of
some functions where we were accepting an ambiguous int type and
expecting the correct values to be passed in.
Now those parameters accept a PowerPC::CPUCore type only, making it
immediately obvious which values should be passed in. It also turns out
we were storing these core types into other structures as plain ints,
which have also been corrected.
As this type is used directly with the configuration code, we need to
provide our own overloaded insertion (<<) and extraction (>>) operators
in order to make it compatible with it. These are fairly trivial to
implement, so there's no issue here.
A minor adjustment to TryParse() was required, as our generic function
was doing the following:
N tmp = 0;
which is problematic, as custom types may not be able to have that
assignment performed (e.g. strongly-typed enums), so we change this to:
N tmp;
which is sufficient, as the value is attempted to be initialized
immediately under that statement.
In cases where we just want a random value for a primitive arithmetic
type, we can wrap this in a template to allow convenient direct
assignment instead of keeping declaration and initialization separate
(making it more difficult to use values uninitialized). This also allows
the use of Common::Random with functions such as std::generate, making
it more flexible in how random values can be generated.
ChunkFile doesn't use any of the file utilities, so we can drop these
headers to avoid pulling in unnecessary dependencies. This also
uncovered a few indirect inclusions.
The required version of MSVC already supports [[maybe_unused]], so we
can utilize this here. When GCC 7 and clang 3.9 become hard
requirements, we can eliminate this macro entirely and replace it with
[[maybe_unused]].
UNUSED is quite a generic macro name and has potential to clash with
other libraries, so rename it to DOLPHIN_UNUSED to prevent that, as well
as make its naming consistent with the force inline macro
This is much better as prefixed double underscores are reserved for the
implementation when it comes to identifiers. Another reason its better,
is that, on Windows, where __forceinline is a compiler built-in, with
the previous define, header inclusion software that detects unnecessary
includes will erroneously flag usages of Compiler.h as unnecessary
(despite being necessary on other platforms). So we define a macro
that's used by Windows and other platforms to ensure this doesn't
happen.
Instead of globbing things under an ambiguous Common.h header, move
compiler-specifics over to Compiler.h. This gives us a dedicated home
for anything related to compilers that we want to make functional across
all compilers that we support.
This moves us a little closer to eliminating Common.h entirely.
This makes it easier to generate random numbers or fill a buffer with
random data in a cryptographically secure way.
This also replaces existing usages of RNG functions in the codebase:
* <random> is pretty hard to use correctly, and std::random_device does
not give enough guarantees about its results (it's
implementation-defined, non cryptographically secure and could be
deterministic on some platforms).
Doing things correctly is error prone and verbose.
* rand() is terrible and should not be used especially in crypto code.
The definition of the function uses the ordering {mod, reg, rm}, which
is correct. Match the prototype to this, so that the parameter list
isn't misleading.
Gets rid of the need to set up memcpy boilerplate to reinterpret between
floating-point and integers.
While we're at it, also do a minor bit of tidying.
Given this is what occurs in both constructors (as one just passes
through to another), we can just initialize the member directly.
While we're at it, amend the struct to follow the general ordering
convention of:
<new types>
<functions>
<variables>
Given this is actually a part of the Host interface, this should be
placed with it.
While we're at it, turn it into an enum class so that we don't dump its
contained values into the surrounding scope. We can also make
Host_Message take the enum type itself directly instead of taking a
general int value.
After this, it'll be trivial to divide out the rest of Common.h and
remove the header from the repository entirely
This was added in 4bdb4aa0d1 back in
2009-02-27. The only usage spot of this macro involves the same checks
that were used to define that preprocessor macro, so we can simply
remove the macro
Only invoke config changed callbacks from Config::Save, not
Layer::Save. The latter results in callbacks being called
once per layer, up to 7 times per save.
- Move all of the ec functions into the Common::ec namespace.
- Give the public functions better names and some usage information.
- Move all of the "elt" related functions into an "elt" class including
all of the arithmetic operations, so that the logic becomes clearer
and feels less like assembly.
This also makes it much more obvious what the parameters are, instead
of only using unsigned char* (which doesn't tell anything about what
the pointer is used for or the size).
- Similarly, add a new "Point" class and move point functions there.
Overload the arithmetic operators to make calculations easier to read
The loops relied on unsigned integer overflow, which is not immediately
obvious. Replace them with less clever variants that are clearer.
Also implement bn_compare using std::memcmp.
This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
This excludes the second argument from template deduction.
Otherwise, it is required to manually cast the second argument to
the ConfigInfo type (because implicit conversions won't work).
e.g. to set the value for a ConfigInfo<std::string> from a string
literal, you'd need a ugly `std::string("yourstring")`.
GetHandle() should really not even be part of IOFile's interface, but
since it is (for the time being), we can cull unnecessary usages of it.
In this case, the WriteBytes() function does what we need without using
the underlying handle directly.
This allows getting rid of casts. We can also leverage std::min to allow
making relevant variables const. Also make the "empty" table const to
allow it to be read-only.
Converts them from 0 == success, 1 == failure to using the built-in
standard bool. Also while we're at it, const qualify write_sector's
"sector" parameter, since nothing in the function modifies the data
being pointed to.
Also move it to MathUtils where it belongs with the rest of the
power-of-two functions. This gets rid of pollution of the current scope
of any translation unit with b<value> macros that aren't intended to be
used directly.
Change SettingsHandler to take a buffer instead of assuming that the
setting file to read is always on the host filesystem for more
flexibility and make it possible to use the new filesystem interface.
Given bit conversions between types are quite common in emulation
(particularly when it comes to floating-point among other things) it
makes sense to provide a utility function that keeps all the boilerplate
contained; especially considering it makes it harder to accidentally
misuse std::memcpy (such as accidentally transposing arguments, etc).
Another benefit of this function is that it doesn't require separating
declarations from assignments, allowing variables to be declared const.
This makes the scenario of of uninitialized variables being used less
likely to occur.
As of VS 15.7, these seem to have been removed. Given we shouldn't have
been using these for some time, just replace them with the standard
library equivalent.
This fixes building on Windows with VS 15.7
Keeps all of the floating-point utility functions in their own file to
keep them all together. This also provides a place for other
general-purpose floating-point functions to be added in the future,
which will be necessary when improving the flag-setting within the
interpreter.
Since all FS access will go through the new FS interface (PR #6421)
in order to keep track of metadata properly, there is no need to return
absolute paths anymore.
In fact, returning host paths is a roadblock to using the FS interface.
This starts the migration work by adding a way to get paths that are
relative to the Wii NAND instead of always getting absolute paths
on the host FS.
To prepare for future changes, this commit also makes returned paths
canonical by removing the trailing slash when it's unneeded.
Eventually, once everything has been migrated to the new interface,
we can remove the "from" parameter.
Allows us to bring includes and relevant libraries into scope by explicitly declaring linkage against the target
as opposed to using a variable. Also removes the dumping of OProfile includes into the top-level directory.
There's no real requirement to make this const, and this should also
be decided by the calling code, considering we had places that would
simply cast away the const and carry on.
It's not common code that could be reused for, say, Citra;
it's absolutely specific to Wii emulation and only used by the Dolphin
core, so let's move it there.
Another reason for doing this is to avoid having Common depend on Core.
It was discovered that some titles rely on filesystem metadata to work
properly. Currently, in master they either simply won't find their
save files (for example Bolt) or will complain about the Wii system
memory being corrupted (on first use or every time depending on
the title).
In order to even be able to keep track of file metadata, we first need
to eliminate all direct accesses to the NAND and make all kinds of
operations go through the filesystem code added in PR 6421.
This commit starts the migration process by making SysConf use
the new FS interface.
The general convention is to return a reference to the object that was
acted on, otherwise you can get into situations with errors because the
type wasn't being propagated properly
Adjusts Common to use the ICONV_LIBRARIES variable directly and doesn't
append it to the LIBS variable.
After this, there's only one remaining usage where libraries are added
to the LIBS variable, after which it can be removed once the rest of
the targets are migrated off add_dolphin_library
These are bit manipulation functions, so they belong within BitUtils.
This also gets rid of duplicated code and avoids relying on compiler
reserved names existing or not existing to determine whether or not we
define a set of functions.
Optimizers are smart enough in GCC and clang to transform the code to a
ROR or ROL instruction in the respective functions.
This is the large change in the branch.
This lets us use either the host filesystem or (in the future) a NAND
image exactly the same way, and make sure the IPC emulation code
behaves identically. Less duplicated code.
Note that "FileIO" and "FS" were merged, because it actually doesn't
make a lot of sense to split them: IOS handles requests for both
/dev/fs and files in the same resource manager, and as it turns out,
/dev/fs commands can *also* be sent to non /dev/fs file descriptors!
If we kept /dev/fs and files split, there would be no way to
emulate that correctly. I'm not aware of anything that does that (yet?)
but I think it's important to be correct.
This adds a lightweight, easy to use std::variant wrapper intended to
be used as a return type for functions that can return either a result
or an error code.
Makes our libraries explicitly link in which libraries they need.
This makes our dependencies explicit and removes the reliance on the
LIBS variable to contain the libraries that they need.
The SGI extension does not define calling SwapInterval with a parameter
of zero as valid. It was just lucky that drivers interpreted this as
vsync off. The EXT_swap_control extension defines zero as a valid value.
Mesa does not appear to support the EXT variant, so we fall back to
MESA_swap_control here, which also supports zero.
This fix the awkwardness of having the symbols detection, parsing and loading related logs be in OS HLE while they don't have anything to do with that.
Stenzek