This fix the 1h32 audio bug which outputs static sound after 1h32.
The mixer is used for 32->48kHz resampling and as output buffer for the async audio backends.
So this buffer was indiced by a writing and a reading pointer and the count of samples in it.
As this is redundant and the sample count isn't accurate calculateable because of the interpolation,
both indices gets out of sync. So after some time (~92min), this buffer overflows and return only garbage.
thx @ moosehunter + delroth for debugging on this issue. You did the most work :-)
Also, some tab/space mismatches removed from VideoOGL, and some places I missed in VideoDX[number] projects.
Now, the Core is literally the only project with tab/space mismatches (on a large scale).
This commit mainly elaborates on some messages a little more. Also fixes some typos that slipped through the last commit.
A large change in text can be seen in EXI_DeviceMemoryCard.cpp. I added more info as to why a write to a memory card may fail. (This actually was a reason I was unable to write to a memcard recently).
Elaborations can be seen in WGL.cpp
I did change some comments in some files that I was correcting logging messages in, however this is only if I spot a typo or if an abbreviation is lower-cased. Even in that case, the amount of changes done to comments is very minimal.
* OpenAL:
Changed SoundTouch to use float samples, allowing SSE to be used. Made the DPL2 decoder disabled by default. Re-added the audio hack used by the Accurate VBeam emulation option.
Added a latency setting to the audio settings. Removed the Sample Rate setting. It is now hardcoded to 48000hz (accurate audio timing).
Skipped timestretching if the emulator is running below 10% speed to prevent buffer overflows.
Removed the synchronisation between the CPU thread and the audio thread. Added code to detect and resume from buffer underruns. Disabled the ability to change the DPL2 option after the game has started. Fixed a memory leak that occurred in the DPL2 decoder. Fixed the OSX build.
Build fix
Added a Dolby Pro Logic II (DPL2) decoder in the OpenAL backend. DPL2 audio is decoded to 5.1. Code adapted from ffdshow. Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system. Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Removed the system timing hack which was activated when the Accurate VBeam option was enabled.
Fixed the include directories in Audio Common for the Windows 32bit build.
Fixed the include directories in Audio Common for the Windows build.
Messed up the static include line
Fix include paths and compiling in Linux. Externals soundtouch is 1.7.1, while Ubuntu 12.10 is 1.6.x. Externals soundtouch is compiled with integer samples, while ubuntu is compiled with float samples. Float samples is probably the more common route. If you're going to use soundtouch, you should probably use SAMPLETYPE instead of explicitly choosing short. This probably breaks the windows build since its includes aren't setup.
OSX: typedef signed char BOOL
OSX build fix
Build fix
Added audio time stretching by using the SoundTouch library.
Implemented correct audio timing.
OpenAL for Windows initial commit
Added code to detect and resume from buffer underruns.
Disabled the ability to change the DPL2 option after the game has started.
Fixed a memory leak that occurred in the DPL2 decoder.
Fixed the OSX build.
Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system.
Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Fixes issue 3023.
They are currently broken and cause sound issues which are not present in other
backends:
* OpenAL plays music 2x too fast in Zelda UCode games with HLE
* Pulse backend uses a lot of CPU power and slows down emulation significantly
Both backends are currently being re-implemented in separate branches of
Dolphin, so this should be a temporary removal.
the intent is to replace the haphazard scheduling and finger-crossing associated with saving/loading with the correct and minimal necessary wait for each thread to reach a known safe location before commencing the savestate operation, and for any already-paused components to not need to be resumed to do so.
XGRA Extreme-G Racing Association/Conduit 2... Enabled 48kHz output for LLE (before it was just 32kHz). I hope it works, if there are serious problems, it will be reverted.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7511 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix a few more dialogs to close with escape.
Fix an issue with the pulse audio sound backend when the dsp emulation method is changed, and the frequency setting was not respected.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7358 8ced0084-cf51-0410-be5f-012b33b47a6e
Uses the last sample from the ppc buffer to fill the samples the ppc
didn't deliver data for, avoids clicking on underruns.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7338 8ced0084-cf51-0410-be5f-012b33b47a6e
buildfix
move much of the build settings to .props files
-please use them as much as possible in the future, instead of changing individual projects
NOTE: to avoid left over blobs, clean your builds *before* applying these changes.
TODO: add DebugFast target for projects that are lacking it. Lack of DebugFast targets cause the linker to use LTCG when we don't want it.
please test for regressions which could be caused by being too happy with compiler flags :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7109 8ced0084-cf51-0410-be5f-012b33b47a6e
problems, whole functions in .h files need to also be static in
case they are included in several .cpp files.
Also a few other minor LTO fixes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7082 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
fix all build targets (they've all built here - you may have to manually delete the intermediate directories if you have conflicts after this commit).
set the debug path to $(TargetDir)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7022 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix some debugger issues. Still need to get sound window working, but the invalid id panic alert is fixed.
Also, a ";" as a comment in an ini file is now only allowed at the beginning of a line. The debugger has settings strings with semicolons in them. That completely broke the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6989 8ced0084-cf51-0410-be5f-012b33b47a6e
and use wxGetKeyState on platforms other than Windows.
I am not sure if wxGetKeyState is unreliable on Windows or if
the use of GetAsyncKeyState() is simply historical, but for now
I've left the Windows call in there just in case.
This does mean that Host_GetKeyState() is currently only valid
for the small set of keycodes that overlap between wx and Win32,
one of which is VK_TAB/WXK_TAB.
Anyway, please test wxGetKeyState on Windows and remove the
ifdef if it works, so we can extend it to the remaining hotkeys.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6988 8ced0084-cf51-0410-be5f-012b33b47a6e
This WILL temporarily break the Linux and MacOSX builds but should be easy to fix.
Things left to do:
* The UI on the new Audio tab for the LLE/HLE choice is ugly
* At times the code still look "plugin-y" and needs cleanup
* The two plugins should be merged further. DSPHLE should use the emulated memory etc of DSPLLE as much as possible, so that simply saving the DSPLLE state is enough. This would also bring the possibility of savestate compatibility between the two plugins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6947 8ced0084-cf51-0410-be5f-012b33b47a6e
'#' is a fairly accepted comment character for .ini files along with
the more official ';', but '//' isn't.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6872 8ced0084-cf51-0410-be5f-012b33b47a6e
Also a small change to the mixer. This should fix audio throttling in cases where num_samples > RESERVED_SAMPLES. This seems to happen now with zelda ucode games, possibly others.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6711 8ced0084-cf51-0410-be5f-012b33b47a6e
assembler for JIT. Replace JIT ToMask() with a different variant. Remove
superfluous zeroWriteBackLog calls(added by me).
Core/Common: Don't bother creating a string and calling into a Logs trigger()
when there is noone listening. Change AtomicLoadAcquire for gcc to just
make the compiler not reorder memory accesses around it instead of doing
a full memory barrier, per the comment in the win32 variant.
Core/AudioCommon: Fix a use of uninitialized variable inside libalsa.
Microbenchmarking results for ToMask variants:(1 000 000 000 iterations):
cpu\variant| shifts | bit scan
intel mobile C2D@2.5GHz | 5.5s | 4.0s
amd athlon64x2@3GHz | 6.1s | 6.4s
(including some constant overhead identical to both variants)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6667 8ced0084-cf51-0410-be5f-012b33b47a6e
logging: turn off write to file
core: don't insert anything in memcard b slot
video: efb scale to integral, AF to 1x
audio: 100% volume, 48KHz sample rate
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6650 8ced0084-cf51-0410-be5f-012b33b47a6e
Most of the code dealing with the LogTypes namespace was C which lead to a
lot of nonsensical casting, so I have dumbed LOG_TYPE and LOG_LEVEL down to
plain C even though the move of wiiuse into Source means we don't currently
call GenericLog from C.
Set logging threshold to MAX_LOGLEVEL at startup so debug builds will also
p rint debugging messages before the GUI is running.
For some reason the way we use SetDefaultStyle doesn't play nice with wx 2.9
so we just get the default black text on a black background. Using a gray
background works around that problem, but I found it to also be much easier
on the eyes so I have switched the background color on all versions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6528 8ced0084-cf51-0410-be5f-012b33b47a6e
Replaces all occurrences of ftell and fseek with ftello and fseeko, respectively. This matters on non-win32 where only these names are altered by the _FILE_OFFSET_BITS define. Win32 still just maps the funcs to ftelli64/fseeki64.
Also add some File::GetSize I had skipped in my last commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6515 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added an option to explicitly disable building with MPG framedumps. To use it add -DENCODE_FRAMEDUMPS=OFF to cmake on the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6429 8ced0084-cf51-0410-be5f-012b33b47a6e
The C version of the GenericLog was being used in both C and C++ branches of the code.
Parent panic alerts by the main_frame so that those windows get the icon too.
Fix a couple of compiler warnings.
Added some checks for libraries in the cmake build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6385 8ced0084-cf51-0410-be5f-012b33b47a6e
Games that have higher frequency sounds and music should sound a bit better using 48k.
I don't have any games that use DTKMusic so that upsampling code untested. If you get strange sounds only at 48k try toggling dtk music to see if that isolates the problem and let me know.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6383 8ced0084-cf51-0410-be5f-012b33b47a6e
Windows audio backend with lower latency.
Audio never glitches on my machine but the number of buffers may be set too aggressively. If you run into problems try turning up NUM_BUFFERS in the h file and leave some feedback.
From my tests games seem to prefer filling the buffer with smaller chunks. For this to work the callback that fills the buffer needs to either spin or run async so I went with async.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6371 8ced0084-cf51-0410-be5f-012b33b47a6e
Note that most users will want to use the release build to get a -O3 optimized build. This can be enabled by adding "-D CMAKE_BUILD_TYPE=Release".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6344 8ced0084-cf51-0410-be5f-012b33b47a6e
Added autodetection of shared libraries.
Added a check for Xrandr.
Fix OpenAL linkage.
Copy User and Sys directories to lower case in the binary directory.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6338 8ced0084-cf51-0410-be5f-012b33b47a6e
Also X11 is required on *nix systems.
GTK2 is required for building the wxWidgets builds on *nix systems.
Added a check for pulseaudio.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6334 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
This is the safe variant that does not assume other
functions use R11 for &g_dsp.r, which they actually do.
So there is a lot unnecessary reloading of the register
getting emitted.
There are a few small changes exploiting pointers known
at emission time and making use of MComplex math.
Also renames m_LLEplaying to m_AIplaying in Core/AudioCommon.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6245 8ced0084-cf51-0410-be5f-012b33b47a6e
This should eliminate the crackling with alsa and pulseaudio backends and replace it
with much nicer pauses. This is only interesting for audio backends that do not
respect Mixer::GetNumSamples() and should not impact users able to run the DSPLLE at
full speed.
The cost of this is an added LLE audio latency of about 0.06 s in the continuous
playback case. If that is too much, lower the low watermark.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6239 8ced0084-cf51-0410-be5f-012b33b47a6e
- First change is for Mixer.cpp, I've just re-added the functionality lost in r4724, so, if you disable audio throttle, games like donkey kong jungle beat, will work properly.
- Second change points to a doubt comment on UCode_Zelda_Voice.cpp, where it did not know here PB.NeedsReset came from. Well, the answer is it came from line 03b2 of the dumped Ucode, so when PB.IsBlanck equals to zero, PB.NeedsReset is zero too.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6100 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
Move bits of HAVE_OPENCL/HAVE_WX for OS X from SConstruct to header files.
Use /usr/lib/libz on OS X now that we no longer have -L/opt/local/lib in
the library path. It is still possible that we could pick up a libz in
/usr/local/lib that would make the application non-redistributable, but
the danger is much less than previously.
Also bits of minor portability cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5868 8ced0084-cf51-0410-be5f-012b33b47a6e
identifying which options and parameters go with which platforms etc.
OS X, like Windows, now no longer uses Config.h. Configure() is still
used for the wx-config parameters, but that is a temporary measure.
Globals.cpp has never been used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5860 8ced0084-cf51-0410-be5f-012b33b47a6e
frameworks on OS X.
Try to be a little clearer about which configuration options apply
to which platform(s). Should pave the way slightly for win32 scons.
We have accidentally been using LUA_USE_LINUX on OS X all along.
Turns out that LUA_USE_MACOSX is for an ancient version of OS X and
LUA_USE_LINUX is a reasonable set of defaults for modern Unices, so
just keep using that.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5804 8ced0084-cf51-0410-be5f-012b33b47a6e
for portability.
(It is a bit unfortunate that some of the plugins have a Config.h of
their own, which can confuse this matter.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5795 8ced0084-cf51-0410-be5f-012b33b47a6e
Not only does it change tons of files to switch to a new and non-working (it doesn't parse my ini files, at least) ini parser, it also reshuffles a lot of code and removes a plugin. The latter part is fine, but doing these two major switches in one revision, one of which is broken, is completely unacceptable. I said to merge tiny changes, not massive reworkings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5589 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
by not linking in other Unix audio modules.
Use kAudioUnitSubType_DefaultOutput instead of kAudioUnitSubType_HALOutput
so that a runtime switch to another audio device is automatically handled.
Use ERROR_LOG for audio errors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5562 8ced0084-cf51-0410-be5f-012b33b47a6e
of going through an intermediate thread and buffer. This seems to be
how Core Audio is meant to be used, although I still haven't read the
manual.
Indeed, sound on OS X works perfectly now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5555 8ced0084-cf51-0410-be5f-012b33b47a6e
quantum, as the callback wants us to provide exactly the amount of
samples needed.
This is incomplete because core audio may ask for less than the full
buffer size (for me, typically 1484 or 1488 bytes of a 2048 byte
buffer). As a quick hack until I read the rather impenetrable core
audio documentation, assume that each callback request will want
about the same number of samples as the preceeding one.
This makes sound bearable.
Also various cleanup.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5543 8ced0084-cf51-0410-be5f-012b33b47a6e
This removes some bad behaviour, like the audio thread busy waiting inside ALSA code,
missing begins of voice samples(due to DSP_HLE code not getting called often enough).
Turns out my understanding of ALSA API was lacking.
Tested with pulse plugin and directly on my intel-hda/realtek hardware.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5461 8ced0084-cf51-0410-be5f-012b33b47a6e
The fix is asking alsa for a prefered "hardware" buffer size, so alsa does not fall
back to pulseaudios offering of ~1 minute. Additionally, alsa busy waits when pulseaudio
is used, sw:avail_min is set and hw:buffer_size is small.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5439 8ced0084-cf51-0410-be5f-012b33b47a6e
. Performance boost
(Completely non-blocking between Sound thread and CPU thread, in the meantime keeping them thread safe)
. Both 32KHz & 48KHz sound can be handled properly now
(But up-sampling is still not implemented, and I don't think any game requires it.)
. Strategy adjustment
When your PC is *NOT* capable to run the game at 100%:
>> DSound Could yield more fluent sound than OpenAL sometimes, but you will lose the sync between video & audio (since audio is played before video to guarantee fluency)
>> OpenAL Ensures video & audio are always sync'ed, but sound could be intermittent(to let slow video catch up)
. Changed default frame limit to: Auto
(Somehow this can dramatically decrease the chance of wiimote desync in game NSMB)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4724 8ced0084-cf51-0410-be5f-012b33b47a6e
. Fixed Sample Rate for DSP
(Now if your CPU is capable to run game at 100%, you will get pure sound without buzz or static noise)
. Fixed Sample Rate for AI
(Now if your CPU is capable to run game at 100%, you will get sync'ed video and audio)
. Fixed Backend list for DSPLLE
. Improved Aduio DMA a bit
(There might be a completely redesign in following phases)
WARNING: The whole rework will take time to complete.
This commit is compilable, but could be unstable.
So you can try it and test it but don't take it as a release rev!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4717 8ced0084-cf51-0410-be5f-012b33b47a6e
But Dolphin's sound stream system really needs a rethink.
Because this is the root cause of constant blocking.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4711 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix aram handling in wii mode - was doing strange things with aram AND mem2 space - only mem2 exists on wii. Let me know if this breaks anything...
Fix Wii BS2 HLE - don't zero out bytes 6 and 7
Thanks to skidau for finding the ssbb error cause :)
Fixes issue 303
Fixes issue 1479
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4687 8ced0084-cf51-0410-be5f-012b33b47a6e
comex