This code has a typo that writes zvkb to zvkg, causing users can't
enable zvkb through the config. This patch gets this fixed.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Fixes: ea61ef7097 ("target/riscv: Move vector crypto extensions to riscv_cpu_extensions")
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Message-ID: <tencent_7E34EEF0F90B9A68BF38BEE09EC6D4877C0A@qq.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In RVV and vcrypto instructions, the masked and tail elements are set to 1s
using vext_set_elems_1s function if the vma/vta bit is set. It is the element
agnostic policy.
However, this function can't deal the big endian situation. This patch fixes
the problem by adding handling of such case.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240325021654.6594-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, the gdbstub allows reading vector registers
only if V extension is supported. However, all vector extensions and
vector crypto extensions have the vector registers and they all depend
on Zve32x. The gdbstub should check for Zve32x instead.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240328022343.6871-4-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve64x extension. Enabling Zve64f enables Zve64x and
enabling Zve64x enables Zve32x according to their dependency.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2107
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-3-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve32x extension and replace some checks for Zve32f with
Zve32x, since Zve32f depends on Zve32x.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privileged spec section 4.1.9 mentions:
"When a trap is taken into S-mode, stval is written with
exception-specific information to assist software in handling the trap.
(...)
If stval is written with a nonzero value when a breakpoint,
address-misaligned, access-fault, or page-fault exception occurs on an
instruction fetch, load, or store, then stval will contain the faulting
virtual address."
A similar text is found for mtval in section 3.1.16.
Setting mtval/stval in this scenario is optional, but some softwares read
these regs when handling ebreaks.
Write 'badaddr' in all ebreak breakpoints to write the appropriate
'tval' during riscv_do_cpu_interrrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240416230437.1869024-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're not setting (s/m)tval when triggering breakpoints of type 2
(mcontrol) and 6 (mcontrol6). According to the debug spec section
5.7.12, "Match Control Type 6":
"The Privileged Spec says that breakpoint exceptions that occur on
instruction fetches, loads, or stores update the tval CSR with either
zero or the faulting virtual address. The faulting virtual address for
an mcontrol6 trigger with action = 0 is the address being accessed and
which caused that trigger to fire."
A similar text is also found in the Debug spec section 5.7.11 w.r.t.
mcontrol.
Note that what we're doing ATM is not violating the spec, but it's
simple enough to set mtval/stval and it makes life easier for any
software that relies on this info.
Given that we always use action = 0, save the faulting address for the
mcontrol and mcontrol6 trigger breakpoints into env->badaddr, which is
used as as scratch area for traps with address information. 'tval' is
then set during riscv_cpu_do_interrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240416230437.1869024-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running a KVM guest using a 6.9-rc3 kernel, in a 6.8 host that has zkr
enabled, will fail with a kernel oops SIGILL right at the start. The
reason is that we can't expose zkr without implementing the SEED CSR.
Disabling zkr in the guest would be a workaround, but if the KVM doesn't
allow it we'll error out and never boot.
In hindsight this is too strict. If we keep proceeding, despite not
disabling the extension in the KVM vcpu, we'll not add the extension in
the riscv,isa. The guest kernel will be unaware of the extension, i.e.
it doesn't matter if the KVM vcpu has it enabled underneath or not. So
it's ok to keep booting in this case.
Change our current logic to not error out if we fail to disable an
extension in kvm_set_one_reg(), but show a warning and keep booting. It
is important to throw a warning because we must make the user aware that
the extension is still available in the vcpu, meaning that an
ill-behaved guest can ignore the riscv,isa settings and use the
extension.
The case we're handling happens with an EINVAL error code. If we fail to
disable the extension in KVM for any other reason, error out.
We'll also keep erroring out when we fail to enable an extension in KVM,
since adding the extension in riscv,isa at this point will cause a guest
malfunction because the extension isn't enabled in the vcpu.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422171425.333037-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current semihost exception number (16) is a reserved number (range
[16-17]). The upcoming double trap specification uses that number for
the double trap exception. Since the privileged spec (Table 22) defines
ranges for custom uses change the semihosting exception number to 63
which belongs to the range [48-63] in order to avoid any future
collisions with reserved exception.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240422135840.1959967-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SBI defines a Debug Console extension "DBCN" that will, in time, replace
the legacy console putchar and getchar SBI extensions.
The appeal of the DBCN extension is that it allows multiple bytes to be
read/written in the SBI console in a single SBI call.
As far as KVM goes, the DBCN calls are forwarded by an in-kernel KVM
module to userspace. But this will only happens if the KVM module
actually supports this SBI extension and we activate it.
We'll check for DBCN support during init time, checking if get-reg-list
is advertising KVM_RISCV_SBI_EXT_DBCN. In that case, we'll enable it via
kvm_set_one_reg() during kvm_arch_init_vcpu().
Finally, change kvm_riscv_handle_sbi() to handle the incoming calls for
SBI_EXT_DBCN, reading and writing as required.
A simple KVM guest with 'earlycon=sbi', running in an emulated RISC-V
host, takes around 20 seconds to boot without using DBCN. With this
patch we're taking around 14 seconds to boot due to the speed-up in the
terminal output. There's no change in boot time if the guest isn't
using earlycon.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240425155012.581366-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but it's not useful for virtualization, where
we'd like the guest to trap to the hypervisor in order to allow
scheduling of the lock holding VCPU. Change to always immediately
raise exceptions when the appropriate conditions are present,
otherwise continue to just return. Note, immediately raising
exceptions is also consistent with the specification since the
time limit that should expire prior to the exception is
implementation-specific.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zkr extension may only be exposed to KVM guests if the VMM
implements the SEED CSR. Use the same implementation as TCG.
Without this patch, running with a KVM which does not forward the
SEED CSR access to QEMU will result in an ILL exception being
injected into the guest (this results in Linux guests crashing on
boot). And, when running with a KVM which does forward the access,
QEMU will crash, since QEMU doesn't know what to do with the exit.
Fixes: 3108e2f1c6 ("target/riscv/kvm: update KVM exts to Linux 6.8")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422134605.534207-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the only instructions in the 3 source scalar class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same
and disas_simd_scalar_three_reg_same, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are faux 2-operand instructions, reading from rd.
Sort them next to the other three-operand same insns for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need for a full comparison; xor produces non-zero bits
for QC just fine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If help_op is not set, ret == DISAS_NEXT.
Shift the test up from surrounding help_wout, help_cout
to skipping to out, as we do elsewhere in the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-14-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set per_address and ilen in per_ifetch; this is valid for
all PER exceptions and will last until the end of the
instruction. Therefore we don't need to give the same
data to per_check_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-13-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
CPU state is read on the exception path.
Fixes: 83bb161299 ("target-s390x: PER instruction-fetch nullification event support")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240502054417.234340-12-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At this point the instruction is complete and there's nothing
left to do but raise the exception. With this change we need
not make two helper calls for this event.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-11-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop from argument, since gbea has always been updated with
this address. Add ilen argument for setting int_pgm_ilen.
Use update_cc_op before calling per_branch.
By raising the exception here, we need not call
per_check_exception later, which means we can clean up the
normal non-exception branch path.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-10-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The breaking-event-address register is updated regardless
of PER being enabled.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-9-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Always use a tcg branch, instead of movcond. The movcond
was not a bad idea before PER was added, but since then
we have either 2 or 3 actions to perform on each leg of
the branch, and multiple movcond is inefficient.
Reorder the taken branch to be fallthrough of the tcg branch.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small helper to handle unconditional indirect jumps.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For PER, we require a conditional call to helper_per_branch
for the conditional branch. Fold the remaining optimization
into a call to helper_goto_direct, which will take care of
the remaining gbea adjustment.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Record successful-branching, instruction-fetching, and
store-using-real-address. The other PER bits are not used
during translation. Having checked these at translation time,
we can remove runtime tests from the helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update from the PoO 14th edition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using exception unwind via tcg_s390_program_interrupt,
we discard the current value of psw.addr, which discards
the result of a branch.
Pass in the address of the next instruction, which may
not be sequential. Pass in ilen, which we would have
gotten from unwind and is passed to the exception handler.
Sync cc_op before the call, which we would have gotten
from unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-2-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This includes AND, ORR, EOR, BIC, ORN, BSF, BIT, BIF.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_simd_3same_pair
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same_fp16,
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_3same_float
and disas_simd_scalar_three_reg_same_fp16 so remove them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last instruction within disas_fp_2src,
so remove that and its subroutines.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Load and zero-extend float16 into a TCGv_i32 before
all scalar operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all forms (scalar, vector, scalar indexed, vector indexed),
which allows us to remove switch table entries elsewhere.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split some routines out of translate-a64.c and translate-sve.c
that are used by both.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of these insns have "if sz == '1' then UNDEFINED" in their pseudocode.
Fixes a RISU miscompare for invalid insn 0x5ef0c87a.
Fixes: 5c36d89567 ("arm/translate-a64: add all FP16 ops in simd_scalar_pairwise")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The decode of FMOV (vector, immediate, half-precision) vs
invalid cases of MOVI are incorrect.
Fixes RISU mismatch for invalid insn 0x2f01fd31.
Fixes: 70b4e6a445 ("arm/translate-a64: add FP16 FMOV to simd_mod_imm")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that neither PLI nor PLDW are present in ARMv6T2,
but are introduced with ARMv7 and ARMv7MP respectively.
For clarity, do not use NOP for PLD.
Note that there is no PLDW (literal). Architecturally in the
T1 encoding of "PLD (literal)" bit 5 is "(0)", which means
that it should be zero and if it is not then the behaviour
is CONSTRAINED UNPREDICTABLE (might UNDEF, NOP, or ignore the
value of the bit).
In our implementation we have patterns for both:
+ PLD 1111 1000 -001 1111 1111 ------------ # (literal)
+ PLD 1111 1000 -011 1111 1111 ------------ # (literal)
and so we effectively ignore the value of bit 5. (This is a
permitted option for this CONSTRAINED UNPREDICTABLE.) This isn't a
behaviour change in this commit, since we previously had NOP lines
for both those patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-3-richard.henderson@linaro.org
[PMM: adjusted commit message to note that PLD (lit) T1 bit 5
being 1 is an UNPREDICTABLE case.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so
we fail to get the expected ARMCPRegInfo from cp_regs hash table with the
wrong key.
Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux
guest can properly detect FEAT_SSBS2 on my M1 HW.
All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14.
It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to
HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on
it.
Cc: qemu-stable@nongnu.org
Fixes: a1477da3dd ("hvf: Add Apple Silicon support")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/i386: Fix allocation and alignment of fp state in signal frame
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
0KPd/A==
=sYrE
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging
target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
target/i386: Convert do_xrstor to X86Access
target/i386: Convert do_xsave to X86Access
linux-user/i386: Honor xfeatures in xrstor_sigcontext
linux-user/i386: Fix allocation and alignment of fp state
linux-user/i386: Return boolean success from xrstor_sigcontext
linux-user/i386: Return boolean success from restore_sigcontext
linux-user/i386: Fix -mregparm=3 for signal delivery
linux-user/i386: Split out struct target_fregs_state
linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
linux-user/i386: Remove xfeatures from target_fpstate_fxsave
linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
target/i386: Split out do_xsave_chk
target/i386: Convert do_xrstor_* to X86Access
target/i386: Convert do_xsave_* to X86Access
tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
In addition, return failure when the header contains invalid
xstate_bv. The kernel handles this via exception handling
within XSTATE_OP within xrstor_from_user_sigframe.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already validated the memory region in the course of
validating the signal frame. No need to do it again within
the helper function.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Yangyu Chen