* preliminary work for GL4.4 extensions (ARB_clear_texture & ARB_multi_bind). Disabled until I got a 4.4 driver
Note: I plan also to use ARB_buffer_storage
* compute texture gl option in the constructor (avoid a couple of swith case)
* redo texture unit management. Unit 0-2 for shaders, Unit 3 for texture operations. MultiBind will allow to bind
shader input without disturbing texture binding points.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5711 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a non-working hack: UserHacks_DateGL4, goal was to replace UserHacks_AlphaStencil
+ Detection of good/bad samples is based on primitive ID variable. However I'm not sure
the behavior is always the same between draw call...Anyway let's keep a copy of the current
work
* Dump integer texture into text csv
* add gl4.2 ARB_shader_image_load_store extension (needed by UserHacks_DateGL4)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5707 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to switch renderer with F9
* skip first frame in stat of the replayer
* drop msaa. Fxaa and internal resolution will do the job
* move texture attachment from texture object into device object (allow to keep sanely the state)
* split the write buffer and attachment setup
* completely split sampler and texture input setup
* redo GSDeviceOGL::CopyOffscreen to avoid an extra copy.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5704 96395faa-99c1-11dd-bbfe-3dabce05a288
* use gles header file, disable opengl code (mainly GLX, ARB_sso, geometry shader)
* Define properly the function pointer, GLES use basic linking whereas GL must get the symbol dynamically
* cmake: properly search and set libglesv2.so
* don't use dual source blending => HW renderer work (only miss unimportant FBA)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5701 96395faa-99c1-11dd-bbfe-3dabce05a288
* uniform was wrongly set before the activation of the program (free driver only)
* Always use only 1 drawbuffer. Easier besides previous setup was wrong for convert:ps_main1
GLES trial (v3):
* add the cmake option GLES_API. Note library (libgles) are hardcoded for the moment
* Disable opengl check
* Disable gl_GetDebugMessageLogARB not supported!
* Emulate gl_DrawElementsBaseVertex, add manually the index offset (surely slow but work)
* Fix hundred of shader error (no implicit cast of integer to float...)
Unfortunately GLES doesn't support dual blending so no blend in hardware renderer. Otherwise it is fine
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5700 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace vertex interface with block interface. It avoid to depends on the ARB_sso extension.
* disable geometry shader on Nvidia & Linux. Slower but better than a black screen !
* default logz to 1, avoid some glitches.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5699 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo glsl2h.pl script to generate only one big glsl headers.
* fix gcc warning in GSVector.h
* fix memory leak of GSDeviceOGL.m_shader
* clean shader compilation function => split generation header & drop malloc stuff
cmake:
* only rebuild shader when asked by the use. Avoid perl dependency to build pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5698 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove the possibility to compile shader from file. Some people loads older shaders...
The feature might be readded later
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5697 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to setup advance gl context attribute. If driver doesn't support it fallback to the default.
zzogl:
* use glsl2h to generate an header shader as GSdx. Much easier to install
* Get GSUniformBufferOGL & GSVertexArrayOGL speed improvement from GSdx
cmake:
* detect current gcc version. Yield a warning if < 4.7 or an error if < 4.5
glsl2h:
* support zzogl too
* compute md5sum to avoid useless relink
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5696 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove unused variable
* move static function from h into cpp
* Initialized hw_by_page to 0xFFFFFFFF instead of -1 (number must be a positive integer)
* Use a s32 fore m_current_lsn instead of u32 (use -1 as error code)
Bonus: a couple of fix for clang compiler (doesn't mean that it fully compile with clang)
* remove useless __debugbreak on linux
* use short for 16bits atomic function
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5695 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix shader compilation on Nvidia (broken on r5682)
* fix various memory leak thanks to Valgrind
Cmake: fix a minor typo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5688 96395faa-99c1-11dd-bbfe-3dabce05a288
* use svnrev.h on linux too
* replace sprintf_s with snprintf (hope it still compile on Windows)
* init integer with 0 instead of NULL
* various int -> u32/uint32/uint on for loop index
* remove a couple of unused variable
* init few variable
* disable unused warning results
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5683 96395faa-99c1-11dd-bbfe-3dabce05a288
* Separate state and shader compilation into separate function
* replace various hash_map by basic array
* Compact VertexScale and offset into a single vec4
* add the new option "ogl_vertex_subdata": subdata is faster on FGLRX, test are welcome on Nvidia drivers
0 => use map/unmap
1 => use subdata
replay: add "linux_replay" option and compute some nice stat (mean, standard deviation)
cmake: recreate shader header at build time
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5682 96395faa-99c1-11dd-bbfe-3dabce05a288
* don't delete the wnd in GSclose. It can still be used later
* Properly detect the GL_ARB_gpu_shader5 extension for Fxaa
* A couple of fix in Create (GSopen1) of GSWndEGL/GSWndOGL
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5674 96395faa-99c1-11dd-bbfe-3dabce05a288
* add exception in GSWndEGL and GSWndOGL
* Try to use EGL when GLX failed => you don't need any flags for the opensource driver ;)
cmake: don't install anymore the glsl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5671 96395faa-99c1-11dd-bbfe-3dabce05a288
gsdx:
* move gl function loading into GSwnd. Clean the header and avoid to rely on macro.
* Always require libegl for GSdx. You still need to select the API at compilation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5670 96395faa-99c1-11dd-bbfe-3dabce05a288
* update linux dialog: create a custom shader box and put it Shade boost and Fxaa
* force the reloading of the inifile after any configuration update.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5666 96395faa-99c1-11dd-bbfe-3dabce05a288
Now the brach is ready to be merged :)
Dears Window users. If you can test that:
1/ still compile
2/ still running on DX
3/ can run with opengl
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5663 96395faa-99c1-11dd-bbfe-3dabce05a288
* Don't write color during stencil. Keep the old method to ease debug
* Realign date shader on DX
* keep stencil ref to 1. Reduce stencil management burder
* Fix texture pitch (was in pixels but need bytes). Fix Bleach Blade Battlers 2. Thanks Miseru for your trace
Remember note:
fxaa -> not yet implemented
msaa -> not implemented (I might drop it actually)
8 bit texture -> not yet implemented
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5657 96395faa-99c1-11dd-bbfe-3dabce05a288
* detect Advanced Micro Devices for newer AMD Card...
* Mess with coordinate for StretchRect. Upscaling seem to work now. Surely the biggest diff between ogl and dx...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5655 96395faa-99c1-11dd-bbfe-3dabce05a288
* factorize sample object creation
* remember frame buffer attachment state
* Use a basic context on EGL. Allow to use Mesa 9.1 on AMD GPU.
* precompile vertex and geometry shader to avoid benchmark polution on replay
* Try harder to detect FGLRX driver on window
* various clean
Remain to fix the coordinate system for upscaling
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5651 96395faa-99c1-11dd-bbfe-3dabce05a288
* Fix shader alpha issue. Hoppefully fix lots of glitches.
* Use glBufferSubData to upload data into the constant buffer instead of map/unmap. More fps :)
* Fix wrong api setup on EGL
* Be more portable on glsl2h
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5650 96395faa-99c1-11dd-bbfe-3dabce05a288
- changed the KH2 fix in GetTextureMinMax to my taste, should give the same results, when the used texture rect is to the left/above the clamped area, it returns [min, min+1], and [max-1, max] for right/below
- m_mem.m_clut.Read32 was returned to its original place from GetAlphaMinMax
- UserHacks_WildHack was moved up to GSState, special UV handlers are only used when this setting is active
- updated xbyak to the latest available (avx2 seems incomplete, the 256-bit promoted old instructions are missing)
- changed vtune's include path to the 2013 edition
Some other not yet commited changes from a year ago:
- WriteImageX overflow crash-fix
- moved colclamp after dithering (sw mode), it makes more sense, no visible changes noticed
- Gif_Tag::analyzeTag(), there was a conditional I didn't like, split the loop into two parts
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5649 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean texture management & use different texture unit for various texture operation
* separate sampler and texture setup
* Always disable GL_SCISSOR_TEST before any cleaning to be sure the all pixels are reset
* properly set upscale_multiplier in the linux gui (was mixed with msaa). Unfortunately it is still broken...
* Fix EGL with GSopen1
* Use stdcall for function definition in the replay (avoid segmentation fault)
* Directly use gl_Position in shader instead of an extra user defined variable
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5648 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace most OGL_FREE_DRIVER with a dynamic detection. Remains the context creation. Closed drivers need 3.3
* Add the CopySubImage fallback
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5647 96395faa-99c1-11dd-bbfe-3dabce05a288
* Emulate Geometry Shader from the CPU.
* add some option to override opengl extension detection
* redo shader interface (again) to compile on the free driver
SW renderer is now working on the free driver.
To test it on your linux box use this cmake option -DEGL_API=TRUE
Note: (need opengl 3.0) I test mesa 9.2 git
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5646 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix a bad interaction when GL_ARB_SSO is supported without GL_ARB_shading_language_420pack
* try to replace struct with flat parameter in glsl interface
=> with some hacks of the free driver, I was able to compile SW renderer shader. Unfortunately
the rendering is broken. Maybe my hack :p
* remove EGL context check (wasn't working as expected)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5644 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix wrong interaction when both GL41 or GL42 aren't supported
* Add a new define to downgrade opengl requirement to test the free driver and EGL
=> As far as I can tell, they only miss geometry shader& GLSL150 (got GLSL140)
* Found a way to avoid crash in AMD driver. Skip the upload of small texture but rendering is wrong now...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5643 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove an old&useles dummy geometry shader (was used to workaround amd bug)
* use a basic X11 window for GSopen1
* redo the replayer: it is now based on dlopen rather than standard static/dynamic library. AMD driver doesn't play nicely with the later...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5639 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace both DISABLE_GL41_SSO and DISABLE_GL42 macro with a dynamic check based on the extension support
* glsl2h: use static instead of extern
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5636 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a perl script to convert shader to char*
* By default use *.glsl file (handy to do some trials).
Only drawback, glsl2h need to be manually called at the moment
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5632 96395faa-99c1-11dd-bbfe-3dabce05a288
* workaround AMD driver bleding issue (got at least a nice rendering in GoW)
* would run on the opensource driver when they support geometry shader
Stil got some crash on the driver. Arg!!!
FGLRX user if you want to do some trials
uncomment #define DISABLE_GL41_SSO in GSdx/config.h
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5630 96395faa-99c1-11dd-bbfe-3dabce05a288
* Use bigger index for Uniform buffer to avoid any collision with sampler.
* add a new config to disable openGL 4.2 requirement. Would be done at runtime later.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5620 96395faa-99c1-11dd-bbfe-3dabce05a288
It wasn't the suspicious code, that actually seems to be correct. The rempty() case should now be unnecessary except in case of bad register settings, but that's outside of our control so it needs to stay until code's added for that case. A console warning would be appropriate.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5612 96395faa-99c1-11dd-bbfe-3dabce05a288
* port KrossX patch from r5556 to openGL
* add a basic gui entry, would love an additional description
* also add the pointsampler hack but don't activate it yet
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5570 96395faa-99c1-11dd-bbfe-3dabce05a288
* Don't try to allocate a "null" array when shader log is empty
* glsl: hopefully implicit cast error on Nvidia driver
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5542 96395faa-99c1-11dd-bbfe-3dabce05a288
* initialize the context status variable that take care of some startup hang
* cmake: don't link and compile EGL when it isn't requested
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5528 96395faa-99c1-11dd-bbfe-3dabce05a288
* implement GSWndEGL copy/pasted from zzogl.
* remove linux debugging shader that failed to compile on window
* add additional debug message during context creation
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5520 96395faa-99c1-11dd-bbfe-3dabce05a288
* Remove bad redefinition of glActiveTexture and glBlendColor pointer
* Remove glew dependency on linux
* s/OGL_DEBUG/ENABLE_OGL_DEBUG/ and enable it on debug
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5512 96395faa-99c1-11dd-bbfe-3dabce05a288
* move GL loading function into its own namespace
* Use manual GL loading on linux too and mostly drop glew dependency. (Not 100% clean we are still depends on some glew define, it will be fixed later)
Note: shaders still need to be copied manually from GSdx/res to bin/plugins
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5510 96395faa-99c1-11dd-bbfe-3dabce05a288
* Update project files
* basic compilation fix: include stdafx, s/uint/uint32/
* add selection of the opengl renderer/device in gsopen
Remain to fix opengl function declaration/initialization
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5505 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix C compilation issue
Remain 2 issues with VCS:
1/ need to add 3rdparty dir as include dir (zzogl seem to import common\vsprops\3rdpartyDeps.props)
2/ need to add opengl32.lib as additional lib
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5503 96395faa-99c1-11dd-bbfe-3dabce05a288
* move all remaining glx into the dedicated GLwin object
* rework a bit WGL to separate opengl context and window creation (like linux actually)
gsdx: Allow to control vsync. Not sure I used the good extension.
cmake:
* check that EGL opengl context creation
* Shut up gcc warning when force inline might not work...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5437 96395faa-99c1-11dd-bbfe-3dabce05a288
Added loading of external shaders, coded by KrossX (thanks again :p ).
Right now it looks for a file called "shader.fx" in PCSX2's main directory.
If it finds one, the PageUp key activates the external shader (instead of the built-in FXAA).
We have a forum thread for some nice shaders to try out here:
http://forums.pcsx2.net/Thread-Custom-Shaders-for-GSdx
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5390 96395faa-99c1-11dd-bbfe-3dabce05a288
NOTE: The 'glew' project does NOT build yet, but it will have to be decided how to approach the problem (String literal too long in glew.rc)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5382 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake: take the opportunity to drop the support of 3rdparty compilation. Distributions have got a more recent version of zlib/soundtouch anyway.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5376 96395faa-99c1-11dd-bbfe-3dabce05a288
* add some dummy shader. Can be modify inside the debugger apitrace
* glclear* commands` seem to depend on scissor test and depth mask. Allow full write for the depth buffer
* texture debug, try to output some nice colors for the depth buffers
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5365 96395faa-99c1-11dd-bbfe-3dabce05a288
Probably only of interest to testers (and me). Absolutely do NOT select the reference device even out of extreme morbid curiosity. It's not even very good at being a reference despite being slower than you can probably believe.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5358 96395faa-99c1-11dd-bbfe-3dabce05a288
Now, a note about the actual issue. Destination alpha tests can be used on the GS as one of the workarounds for a lack of stencils. If you use a destination alpha test and leave alpha writing on, the GS will only write each pixel until you write an alpha value which would fail the test. This works to a point in gsdx without further hacking, but that point is when within a single batch of primitives the same pixels are written multiple times and the destination alpha test is expected to update. I did experimentally make a tight loop updating the stencil with a draw then drawing for one primitive at a time, but it was prohibitively slow (over 80% fps loss, you really don't want to know).
Destination alpha testing cannot be directly implemented in D3D9 or D3D10, but (probably) can in D3D11 (with a speed hit for sure, but I doubt it'll be 80%). I'll be getting a new graphics card and looking into that.
And before some idiot says it, the answer is no. OpenGL does not help.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5346 96395faa-99c1-11dd-bbfe-3dabce05a288
This may make gsdx slightly slower for everyone (I don't know an easy way to restrict this to affected systems), especially if using 8-bit textures.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5341 96395faa-99c1-11dd-bbfe-3dabce05a288
Thanks for reporting.
(Also replaced broken Chinese characters in comments.)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5330 96395faa-99c1-11dd-bbfe-3dabce05a288
So, in the end I only properly understood the old code after finding all the problems with my version. I'm not sure whether any changes I've made are improvements any more, I'll need to review it with what I've learned in mind. This effort might've been a big waste of time.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5329 96395faa-99c1-11dd-bbfe-3dabce05a288
GSdx Hackfixes: Lego Batman changed to aggressive list, doesn't really fix ingame and breaks the title screens.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5328 96395faa-99c1-11dd-bbfe-3dabce05a288
- Removed the #define DISABLE_CRC_HACKS (since it's at the GUI now).
- reverted r5315 and r5319 (which prevented gs dumps to have a correct CRC).
- Restored the functionality of these revisions via simple skip of the other hack calls.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5320 96395faa-99c1-11dd-bbfe-3dabce05a288
gregory.hainaut