This also may eventually allow loading patches from sources other than the 1:1 expected file structure host file system, such as memory or an archive file.
Retail-signed discs use the format: IOS56-64-v5661.wad
Debug-signed discs use the format: firmware.64.56.22.29.wad
Debug-signed discs usually have a 128 version of the firmware as well,
since some devkits have 128 MB MEM2. (Retail has 64 MB.)
The workaround added in 30f9f31 caused a regression where Dolphin
incorrectly replaced runs of one byte with runs of another byte
when writing WIA and RVZ files. ReuseID::operator< was always
returning false unless the ReuseIDs being compared had different
partition keys, which caused std::map<ReuseID, GroupEntry>
to treat all ReuseIDs with the same partition key as equal.
Public domain does not have an internationally agreed upon definition,
As such it's generally preferred to use an extremely liberal license,
which can explicitly list the rights granted by the copyright holder.
The CC0 license is the usual choice here.
This "relicensing" is done without hunting down copyright holders, since
it is presumed that their release of this work into the public domain
authorizes us to redistribute this code under any other license of our
choosing.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
This improves the speed of verifying Wii WIA/RVZ files.
For me, the verification speed for LZMA2-compressed files
has gone from 11-12 MiB/s to 13-14 MiB/s.
One thing VolumeVerifier does to achieve parallelism is to
compute hashes for one chunk of data while reading the next
chunk of data. In master, when reading data from a Wii
partition, each such chunk is 32 KiB. This is normally fine,
but with WIA and RVZ it leads to rather lopsided read times
(without the compute times being lopsided): The first 32 KiB
of each 2 MiB takes a long time to read, and the remaining
part of the 2 MiB can be read nearly instantly. (The WIA/RVZ
code has to read the entire 2 MiB in order to compute hashes
which appear at the beginning of the 2 MiB, and then caches
the result afterwards.) This leads to us at times not doing
much reading and at other times not doing much computation.
To improve this, this change makes us use 2 MiB chunks
instead of 32 KiB chunks when reading from Wii partitions.
(block = 32 KiB, group = 2 MiB)
This can't actually happen in practice due to how WAD files work,
but it's very easy to add support for thanks to the last commit,
so we might as well add support for it.
The performance gains of doing this aren't too important since you
normally wouldn't run into any disc image that has overlapping blocks
(which by extension means overlapping partitions), but this change also
lets us get rid of things like VolumeVerifier's mutex that used to
exist just for the sake of handling overlapping blocks.
Panic alerts in DiscIO can potentially be very annoying since
large amounts of them can pop up when loading the game list
if you have some particularly weird files in your game list.
This was a much bigger problem back in 5.0 with its
"Tried to decrypt data from a non-Wii volume" panic alert, but
I figured I would take it all the way and remove the remaining
panic alerts that can show up when loading the game list.
I have exempted uses of ASSERT/ASSERT_MSG since they indicate
a bug in Dolphin rather than a malformed file.
The loop in WIARVZFileReader::Chunk::Read could terminate
prematurely if the size argument was smaller than the size
of an exception list which had only been partially loaded.
Some of the device names can be ambiguous and require fully or partly
qualifying the name (e.g. IOS::HLE::FS::) in a somewhat verbose way.
Additionally, insufficiently qualified names are prone to breaking.
Consider the example of IOS::HLE::FS:: (namespace) and
IOS::HLE::Device::FS (class). If we use FS::Foo in a file that doesn't
know about the class, everything will work fine. However, as soon as
Device::FS is declared via a header include or even just forward
declared, that code will cease to compile because FS:: now resolves
to Device::FS if FS::Foo was used in the Device namespace.
It also leads to having to write IOS::ES:: to access ES types and
utilities even for code that is already under the IOS namespace.
The fix for this is simple: rename the device classes and give them
a "device" suffix in their names if the existing ones may be ambiguous.
This makes it clear whether we're referring to the device class or to
something else.
This is not any longer to type, considering it lets us get rid of the
Device namespace, which is now wholly unnecessary.
There are no functional changes in this commit.
A future commit will fix unnecessarily qualified names.
We want to use positional arguments in translatable strings
that have more than one argument so that translators can change
the order of them, but the question is: Should we also use
positional arguments in translatable strings with only one
argument? I think it makes most sense that way, partially
so that translators don't even have to be aware of the
non-positional syntax and partially because "translatable
strings use positional arguments" is an easier rule for us
to remember than "transitional strings which have more than
one argument use positional arguments". But let me know if
you have a different opinion.
Fixes the following warning:
../../../../../../Core\DiscIO/DirectoryBlob.h:156:3: warning: explicitly defaulted move constructor is implicitly deleted [-Wdefaulted-function-deleted]
DirectoryBlobReader(DirectoryBlobReader&&) = default;
^
../../../../../../Core\DiscIO/DirectoryBlob.h:205:22: note: move constructor of 'DirectoryBlobReader' is implicitly deleted because field 'm_encryption_cache' has a deleted move constructor
WiiEncryptionCache m_encryption_cache;
^
Once nice benefit of fmt is that we can use positional arguments
in localizable strings. This a feature which has been
requested for the Korean translation of strings like
"Errors were found in %zu blocks in the %s partition."
and which will no doubt be useful for other languages too.
Noticed missing include as a build failure on gcc-11:
```
[ 26%] Building CXX object Source/Core/DiscIO/CMakeFiles/discio.dir/WIACompression.cpp.o
../../../../Source/Core/DiscIO/WIACompression.cpp: In lambda function:
../../../../Source/Core/DiscIO/WIACompression.cpp:170:31: error: 'numeric_limits' is not a member of 'std'
170 | std::min<size_t>(std::numeric_limits<unsigned int>().max(), x));
| ^~~~~~~~~~~~~~
../../../../Source/Core/DiscIO/WIACompression.cpp:170:46: error: expected primary-expression before 'unsigned'
170 | std::min<size_t>(std::numeric_limits<unsigned int>().max(), x));
| ^~~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
By calling ZSTD_CCtx_setPledgedSrcSize, we can let zstd know
how large a chunk is going to be before which start compressing
it, which lets zstd avoid allocating more memory than needed
for various internal buffers. This greatly reduces the RAM usage
when using a high compression level with a small chunk size,
and doesn't have much of an effect in other circumstances.
A side effect of calling ZSTD_CCtx_setPledgedSrcSize is that
zstd by default will write the uncompressed size into the
compressed data stream as metadata. In order to save space,
and since the decompressed size can be figured out through
the structure of the RVZ format anyway, we disable writing
the uncompressed size by setting ZSTD_c_contentSizeFlag to 0.
It's possible (but rare) for a WIA or RVZ file to support
this for some partitions but not all, and for the game and
the blob code to disagree on how large a partition is.
The heuristic was not allocating enough space for Metroid: Other M,
at least when using the default settings. (This didn't break the
file, it just caused some headers to be placed at the end of the
file instead of at the start and wasted a few hundred kilobytes.)
The new hash check catches essentially all desync problems
that VolumeVerifier can catch, so from the user's perspective,
such problems will result in Dolphin refusing to start the
game on netplay rather than actually getting a desync.
The "FindLibLZMA.cmake" module in CMake versions prior to 3.14 do not
set an alias like how Externals/liblzma/CMakeLists.txt does, so builds
performed using one of those older CMake versions will fail if the
system LZMA library is detected. To fix this, we need to link against
"lzma" instead of "LibLZMA::LibLZMA".
Fixes: b59ef81a7e ("WIA: Implement bzip2, LZMA, and LZMA2 decompression")
When I first made VolumeVerifier, I figured that the distinction
between an unsigned ticket and an unsigned TMD was a technical
detail that users would have no reason to care about. However,
while this might be true for discs, it isn't equally true for
WADs, due to the widespread practice of fakesigning tickets to
set the console ID to 0. This practice does not require
fakesigning the TMD (though apparently people do it anyway,
at least sometimes...), and the presence of a correctly signed
TMD is a useful indicator that the contents have not been
tampered with, even if the ticket isn't correctly signed.
Instead of comparing the game ID, revision, disc number and name,
we can compare a hash of important parts of the disc including
all the aforementioned data but also additional data such as the
FST. The primary reason why I'm making this change is to let us
catch more desyncs before they happen, but this should also fix
https://bugs.dolphin-emu.org/issues/12115. As a bonus, the UI can
now distinguish the case where a client doesn't have the game at
all from the case where a client has the wrong version of the game.
It is my opinion that nobody should use NKit disc images without
being aware of the drawbacks of them. Since it seems like almost
nobody who is using NKit disc images knows what NKit is (hmm, now
how could that have happened...?), I am adding a warning to Dolphin
so that you can't run NKit disc images without finding out about the
drawbacks. In case someone really does want to use NKit disc images,
the warning has a "Don't show this again" option. Unfortunately, I
can't retroactively add the warning where it's most needed:
in Dolphin 5.0, which does not support Wii NKit disc images.
This could cause read errors if chunks were laid out a certain
way in the file and the whole chunk wasn't being read at once.
Should fix https://bugs.dolphin-emu.org/issues/12184.
PURGE isn't especially useful, while requiring some annoying
special handling in the file format. If you want no compression,
use NONE. If you want fast compression, use Zstandard.
Gets rid of the need to seek to the end of the file
when opening a file.
The downside of this is that we waste a little space,
since we can't know in advance exactly how much
space the compressed parts of the headers will need.
This is useful for the way Dolphin scrubs Wii discs.
The encrypted data is what gets zeroed out, but this
zeroed out data then gets decrypted before being stored,
and the resulting data does not compress well.
However, each block of decrypted scrubbed data is
identical given the same encryption key, and there's
nothing stopping us from making multiple group entries
point to the same offset in the file, so we only have
to store one copy of this data per partition.
For reference, wit zeroes out the decrypted data,
but Dolphin's WIA writer can't do this because it currently
doesn't know which parts of the disc are scrubbed.
This is also useful for things such as storing Datel discs
full of 0x55 blocks (repesenting unreadable blocks)
without compression enabled.
Fixes https://bugs.dolphin-emu.org/issues/10654.
To quote the documenation file included with the program tgctogcm:
"TGC's are miniaturized .gcm images with a 32kB header.
The embedded gcm contains some bogus data, namely:
-FST Location (0x424 in gcm)
-DOL Location (0x420 in gcm)
-FST File offsets (all files are offset/spoofed by a certain amount)"
Dolphin has been handling the values at 0x420 and 0x424 by simply
overwriting them with a working value (just like tgctogcm does),
but it has used a different approach for the file offsets in the FST.
Instead of changing the offsets that are stored in the FST, Dolphin
changed where the files actually are placed on the virtual disc.
My hope was that this would make the loading times more accurate to
how they are when running a TGC file as part of a larger disc.
However, there are TGC files where we would need to move files
backwards on the disc in order to do this (this is what issue
10654 is about), so the approach we have been using is flawed.
This change makes Dolphin overwrite offsets in the FST instead, like
tgctogcm does. Other than making Dolphin handle the affected TGC files
correctly, this change also makes it so that unnecessary padding data
isn't written if you use Dolphin to convert a TGC file to an ISO file.
This feature is not actually implemented in Dolphin as of now, but I'm
planning to add it in the near future as part of a larger feature.
This is intended to catch WIA files which have been created using
wit's default parameters (40 MiB block size), once the WIA PR is
merged. The check does however also work for GCZ files – not that
I think anyone has a GCZ file with a block size that large.
ssdsnake