Deleting instead of overwriting makes the INI cleaner.
Also, in case we change defaults in the future, users will
get the new default when using a new version even if
they have pressed the Reset button in an older version.
This adds support for triggering the power event (in the STM), so that
stopping emulation first triggers a shutdown event, which notably gives
emulated software time to save game data (issue 8979) and clean up
SYSCONF (to disconnect Wiimotes and update their state in the SYSCONF).
On the first press, the stop button/hotkey/whatever will trigger a STM
power event. On a second try, we will forcefully stop emulation, just
like how it was working before.
This is needed because for some reason the WSI for NV Vulkan drivers
doesn't return VK_ERROR_OUT_OF_DATE_KHR, so there is no other way to know
that a resize has occured apart from polling, which is a poor solution for
X11 (since it is blocking).
Considering there's a public method in the class using it, leaving the
definition in the cpp file can cause a linker error if any method outside
that cpp file calls it for one reason or another.
Single step: Fix an oddity when a breakpoint is hit at the beginning of a block, then after, a single step is performed and finally, hitting play, the breakpoint will be skipped even in the case when it would be hit again. This was done by using the interpreter version of single step. Also, remove some redundant update request.
Step over: fix some GUI lags.
Step out: Add consideration for conditional branching by checking the condition as the interpreter does. Now, every bclr instructions except those that changes the LR (because it would not be the end of the function) will cause the end of the step out and not just blr instructions. Also now stops if a bp is detected and finally, remove redundant GUI updates calls.
This also removes a superfluous draw call on the GUI as the codeView was refreshing twice per event to do so.
The old one wasn't very optimal because not only the user would likely want to enter an address instead of a range, but it also made entering just one address confusing (you had to have the same value on both start and end). Also, you should only chose one option between read, write or both, there is no point to not have any.
This is why I made more clear how to add an address and it is the default option using radio buttons and I also made the action flags and the flags to be radio buttons.
This is the same as PR #3991, but for MainNoGUI.
nogui/headless will shut down cleanly on SIGINT and SIGTERM, just like
it would when closing the render window.
The default signal handler will be restored after a first shutdown
signal so a second signal will exit Dolphin forcefully.
Fixes the issue on macOS where quitting Dolphin from the Dock causes a
crash report (https://bugs.dolphin-emu.org/issues/9794). I'm not
exactly sure why this works, but it feels right and it turns out to fix
the problem.
This adds a recenter control binding which allows recentering the
cursor when relative input is enabled.
(EnableSettingControl is renamed to avoid confusions.)
This makes the GUI show the settings that are loaded when the config
gets reloaded, instead of showing potentially outdated settings that
are not applied.
This adds an option to enable relative input for the Wiimote IR
as described in issue 9014.
Enabling it will result in the pointer not going back to the centre
and the inputs will control the direction, not the absolute position.
Also adds a Dead Zone setting which is really needed when relative
input is enabled to prevent the cursor from slowly drifting on
most controllers. (Note: the Deadzone setting has no effect when
relative input is disabled)
Doing this forces the window to be drawn before reparenting it. It fixes the possibility of creating an empty floating window if the selected tab wasn't corespoinding to the window.
There might be a better way to highlight the options when adding the memory check, but for now, this works and the breakpoint list reports the right settings anyway.
It wouldn't impact performance until at least one memcheck is enabled. Because of this, it can be used in release builds without much impact, the only thing that woudl change is the use of HasAny method instead of preprocessor conditionals. Since the perforamnce decrease comes right when the first memcheck is added and restored when the last is removed, it basically is all beneficial and works the same way.
All formatting are individual per registers and they all have one option to go back to their original hexadecimal form.
- GPR: signed integer, unsigned integer, float
- FPR: double
Also happened to come accross an issue where editing the PFR would ignore the higher 32 bits of the new value, this had to be fixed for the format to work.
This removes a Dolphin-specific patch to the wxWidgets3 code
for the following reasons:
* Calling wxWindowGTK::DoSetSize on a top-level window can end up
calling wxTopLevelWindowGTK::DoMoveWindow, which triggers an assert
because it is not supposed to be called for a top-level wxWindow.
* We should not be patching the wxWidgets code because that means the
toolbars will still be broken if someone builds without using the
WX that is in our Externals.
Instead, we now use a derived class for wxAuiToolBar and override
DoSetSize() to remove the problematic behaviour to get the same effect
(fixing toolbars) but without changing Externals code and without
causing asserts and other issues.
For step over, it was updating twice which actually made the red display on the register view (when a register changes since) malfunction. Since it doesn't seem to be usefull to update before AND after the run, the one before the run was removed.
For step out, well, because there was no chances given for the thread to run as it is single stepping all the time, I only added a call to update after it was done.
Dolphin no longer lowers itself below the top window when opening.
Dolphin no longer draws garbage lines all over the game list.
Use the correct platform macros so Dolphin can actually find the
translation catalogs on Unix.
Both those in the code window and the ones that appears when the user select edit perpective. The one that isn't fixed by this is in edit perspective mode, when the user drags a panel out and it becomes a floating window.
The 'revert' functionality is some very old left-over and isn't even working properly (read: could break Wiimote mapping). As no dialog features any cancel and revert functionality it is removed.
The original code assumed that we would always find a button in
control_buttons. However, this is incorrect, since the iterator can and
will be control_buttons.end() if the button that triggered the iterate
code is not in control_buttons, which happens when it's in an
exclude list.
When 5.0-211 updated wxWidgets to 3.1.0, some entries in the
wxLanguage enum were moved and added, changing the wxLanguage
values. Because we save Dolphin's interface language to disk
as a wxLanguage, the language you have set will mean something
different depending on whether you have the updated wx version
or not. For instance, setting the language to English with the
updated version and then using an older version will make
Dolphin use Dutch. Because we can't rely on the enum anymore,
I'm replacing the "Language" setting with a "LanguageCode"
setting that uses standard ISO 639 codes.
Add the CCodeWindow to the constructor of the memoryWindow so it can call the notify update of the breakpoint list.
Add the case of breakpoint update when receiving an event (the update command was issued, but wasn't managed before).
Run clang format and renamed the code window names.
Let's stop pretending that we support Triforce emulation.
Keeping this code around just in case someone will make
major improvements in the future isn't really worth it.
I'm keeping the Triforce game INIs so users will know that
the compatibility rating for Triforce games is 1 star (broken).
OSD messages other than these one and a half aren't translated,
and OSD only supports ASCII. (Also, that "Wiimote %i %s" uses %s
like it does is bad for translation, but that's easy to fix.)
The default size might be too big for some screens. This allows
the user to modify the window as they see fit and has Dolphin
remember those settings. People who are happy with the default
size and position will not be affected
There is no reason to prevent the user from closing the config dialog
if the device is not found. It's not very good UX…
Also fixes ExpressionParser to return NO_DEVICE if the device doesn't
exist instead of SUCCESS.
This adds RemoveDevice() to ControllerInterface, fixes ExpressionParser
and some other code to support device removals without crashing,
and adds an IsValid() method to Device, to prepare for hotplugging.
Pausing emulation requires to access the CPU thread, which might be blocked
waiting for inputs by netplay. Accessing it in this state would cause the
whole GUI to hang for set timeout (10s).
Once a tab is selected the focus can be set directly from the page
changed event. However once the tab was shown, the first tab order
control element was given the focus by default. This was fixed by
delaying the action and setting the focus after the default focus
had been assigned.
* Focus "Hash Code" / "IP address" text box by default in "Connect"
* Focus game list in "Host" tab
* RETURN keypress now host/join depending on selected tab
* Remember last hosted game
* Remove PanicAlertT:
* Simply log message to netplay window
* Remove them when they are useless
* Show some netplay message in OSD
* Chat messages
* Pad buffer changes
* Desync alerts
* Stop the game consistently when another player disconnects / crashes
* Prettify chat textbox
* Log netplay ping to OSD
Join scenario:
* Copy netplay code
* Open netplay
* Paste code
* Press enter
Host scenario:
* Open netplay
* Go to host tab
* Press enter
JosJuice