Implement the MVE VCADD insn, which performs a complex add with
rotate. Note that the size=0b11 encoding is VSBC.
The architecture grants some leeway for the "destination and Vm
source overlap" case for the size MO_32 case, but we choose not to
make use of it, instead always calculating all 16 bytes worth of
results before setting the destination register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-42-peter.maydell@linaro.org
Implement the MVE VADC and VSBC insns. These perform an
add-with-carry or subtract-with-carry of the 32-bit elements in each
lane of the input vectors, where the carry-out of each add is the
carry-in of the next. The initial carry input is either 1 or is from
FPSCR.C; the carry out at the end is written back to FPSCR.C.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-41-peter.maydell@linaro.org
Implement the MVE VRHADD insn, which performs a rounded halving
addition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-40-peter.maydell@linaro.org
Implement the vector form of the MVE VQDMULL insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-39-peter.maydell@linaro.org
Implement the MVE VQDMLSDH and VQRDMLSDH insns, which are
like VQDMLADH and VQRDMLADH except that products are subtracted
rather than added.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-38-peter.maydell@linaro.org
Implement the MVE VQDMLADH and VQRDMLADH insns. These multiply
elements, and then add pairs of products, double, possibly round,
saturate and return the high half of the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-37-peter.maydell@linaro.org
Implement the MV VQRSHL (vector) insn. Again, the code to perform
the actual shifts is borrowed from neon_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-34-peter.maydell@linaro.org
Implement the MVE VQSHL insn (encoding T4, which is the
vector-shift-by-vector version).
The DO_SQSHL_OP and DO_UQSHL_OP macros here are derived from
the neon_helper.c code for qshl_u{8,16,32} and qshl_s{8,16,32}.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-33-peter.maydell@linaro.org
Implement the vector forms of the MVE VQADD and VQSUB insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-32-peter.maydell@linaro.org
Implement the vector forms of the MVE VQDMULH and VQRDMULH insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-31-peter.maydell@linaro.org
Implement the MVE VQDMULL scalar insn. This multiplies the top or
bottom half of each element by the scalar, doubles and saturates
to a double-width result.
Note that this encoding overlaps with VQADD and VQSUB; it uses
what in VQADD and VQSUB would be the 'size=0b11' encoding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-30-peter.maydell@linaro.org
Implement the MVE VQDMULH and VQRDMULH scalar insns, which multiply
elements by the scalar, double, possibly round, take the high half
and saturate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-29-peter.maydell@linaro.org
Implement the MVE VQADD and VQSUB insns, which perform saturating
addition of a scalar to each element. Note that individual bytes of
each result element are used or discarded according to the predicate
mask, but FPSCR.QC is only set if the predicate mask for the lowest
byte of the element is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-28-peter.maydell@linaro.org
Implement the MVE VPST insn, which sets the predicate mask
fields in the VPR to the immediate value encoded in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-27-peter.maydell@linaro.org
Implement the MVE VBRSR insn, which reverses a specified
number of bits in each element, setting the rest to zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-26-peter.maydell@linaro.org
Implement the scalar variants of the MVE VHADD and VHSUB insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-25-peter.maydell@linaro.org
Implement the scalar forms of the MVE VSUB and VMUL insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-24-peter.maydell@linaro.org
Implement the scalar form of the MVE VADD insn. This takes the
scalar operand from a general purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-23-peter.maydell@linaro.org
Implement the MVE VRMLALDAVH and VRMLSLDAVH insns, which accumulate
the results of a rounded multiply of pairs of elements into a 72-bit
accumulator, returning the top 64 bits in a pair of general purpose
registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-22-peter.maydell@linaro.org
Implement the MVE insn VMLSLDAV, which multiplies source elements,
alternately adding and subtracting them, and accumulates into a
64-bit result in a pair of general purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-21-peter.maydell@linaro.org
Implement the MVE VMLALDAV insn, which multiplies pairs of integer
elements, accumulating them into a 64-bit result in a pair of
general-purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-20-peter.maydell@linaro.org
Implement the MVE VMULL insn, which multiplies two single
width integer elements to produce a double width result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-19-peter.maydell@linaro.org
Implement MVE VHADD and VHSUB insns, which perform an addition
or subtraction and then halve the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-18-peter.maydell@linaro.org
Implement the MVE VABD insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-17-peter.maydell@linaro.org
Implement the MVE VMAX and VMIN insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-16-peter.maydell@linaro.org
Implement the MVE VRMULH insn, which performs a rounding multiply
and then returns the high half.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-15-peter.maydell@linaro.org
Implement the MVE VMULH insn, which performs a vector
multiply and returns the high half of the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-14-peter.maydell@linaro.org
Implement the MVE VADD, VSUB and VMUL insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-13-peter.maydell@linaro.org
Implement the MVE vector logical operations operating
on two registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-12-peter.maydell@linaro.org
Implement the MVE VDUP insn, which duplicates a value from
a general-purpose register into every lane of a vector
register (subject to predication).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-11-peter.maydell@linaro.org
Implement the MVE VNEG insn (both integer and floating point forms).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-9-peter.maydell@linaro.org
Implement the MVE VABS functions (both integer and floating point).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-8-peter.maydell@linaro.org
Implement the MVE VMVN(register) operation. Note that for
predication this operation is byte-by-byte.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-7-peter.maydell@linaro.org
Implement the MVE instructions VREV16, VREV32 and VREV64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-6-peter.maydell@linaro.org
Implement the MVE VCLS insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-5-peter.maydell@linaro.org
Implement the MVE VCLZ insn (and the necessary machinery
for MVE 1-input vector ops).
Note that for non-load instructions predication is always performed
at a byte level granularity regardless of element size (R_ZLSJ),
and so the masking logic here differs from that used in the VLDR
and VSTR helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-4-peter.maydell@linaro.org
Implement the variants of MVE VLDR (encodings T1, T2) which perform
"widening" loads where bytes or halfwords are loaded from memory and
zero or sign-extended into halfword or word length vector elements,
and the narrowing MVE VSTR (encodings T1, T2) where bytes or
halfwords are stored from halfword or word elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-3-peter.maydell@linaro.org
Implement the forms of the MVE VLDR and VSTR insns which perform
non-widening loads of bytes, halfwords or words from memory into
vector elements of the same width (encodings T5, T6, T7).
(At the moment we know for MVE and M-profile in general that
vfp_access_check() can never return false, but we include the
conventional return-true-on-failure check for consistency
with non-M-profile translation code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-2-peter.maydell@linaro.org
Instead of open-coding the "take NOCP exception if FPU disabled,
otherwise call gen_preserve_fp_state()" code in the accessors for
FPCXT_NS, add an argument to vfp_access_check_m() which tells it to
skip the gen_update_fp_context() call, so we can use it for the
FPCXT_NS case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-8-peter.maydell@linaro.org
vfp_access_check and its helper routine full_vfp_access_check() has
gradually grown and is now an awkward mix of A-profile only and
M-profile only pieces. Refactor it into an A-profile only and an
M-profile only version, taking advantage of the fact that now the
only direct call to full_vfp_access_check() is in A-profile-only
code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-7-peter.maydell@linaro.org
Factor the code in full_vfp_access_check() which updates the
ownership of the FP context and creates a new FP context
out into its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-6-peter.maydell@linaro.org
A few subcases of VLDR/VSTR sysreg succeed but do not perform a
memory access:
* VSTR of VPR when unprivileged
* VLDR to VPR when unprivileged
* VLDR to FPCXT_NS when fpInactive
In these cases, even though we don't do the memory access we should
still update the base register and perform the stack limit check if
the insn's addressing mode specifies writeback. Our implementation
failed to do this, because we handle these side-effects inside the
memory_to_fp_sysreg() and fp_sysreg_to_memory() callback functions,
which are only called if there's something to load or store.
Fix this by adding an extra argument to the callbacks which is set to
true to actually perform the access and false to only do side effects
like writeback, and calling the callback with do_access = false
for the three cases listed above.
This produces slightly suboptimal code for the case of a write
to FPCXT_NS when the FPU is inactive and the insn didn't have
side effects (ie no writeback, or via VMSR), in which case we'll
generate a conditional branch over an unconditional branch.
But this doesn't seem to be important enough to merit requiring
the callback to report back whether it generated any code or not.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-5-peter.maydell@linaro.org
The M-profile architecture requires that accesses to FPCXT_NS when
there is no active FP state must not take a NOCP fault even if the
FPU is disabled. We were not implementing this correctly, because
in our decode we catch the NOCP faults early in m-nocp.decode.
Fix this bug by moving all the handling of M-profile FP system
register accesses from vfp.decode into m-nocp.decode and putting
it above the NOCP blocks. This provides the correct behaviour:
* for accesses other than FPCXT_NS the trans functions call
vfp_access_check(), which will check for FPU disabled and
raise a NOCP exception if necessary
* for FPCXT_NS we have the special case code that doesn't
call vfp_access_check()
* when these trans functions want to raise an UNDEF they return
false, so the decoder will fall through into the NOCP blocks.
This means that NOCP correctly takes precedence over UNDEF
for these insns. (This is a difference from the other insns
handled by m-nocp.decode, where UNDEF takes precedence and
which we implement by having those trans functions call
unallocated_encoding() in the appropriate places.)
[Note for backport to stable: this commit has a semantic dependency
on commit 9a486856e9, which was not marked as cc-stable because
we didn't know we'd need it for a for-stable bugfix.]
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-4-peter.maydell@linaro.org
If the guest makes an FPCXT_NS access when the FPU is disabled,
one of two things happens:
* if there is no active FP context, then the insn behaves the
same way as if the FPU was enabled: writes ignored, reads
same value as FPDSCR_NS
* if there is an active FP context, then we take a NOCP
exception
Add code to the sysreg read/write functions which emits
code to take the NOCP exception in the latter case.
At the moment this will never be used, because the NOCP checks in
m-nocp.decode happen first, and so the trans functions are never
called when the FPU is disabled. The code will be needed when we
move the sysreg access insns to before the NOCP patterns in the
following commit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-3-peter.maydell@linaro.org
In the code for handling VFP system register accesses there is some
stray whitespace after a unary '-' operator, and also some incorrect
indent in a couple of function prototypes. We're about to move this
code to another file, so fix the code style issues first so
checkpatch doesn't complain about the code-movement patch.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-2-peter.maydell@linaro.org
The virt_is_acpi_enabled() function is specific to the virt board, as
is the check for its 'ras' property. Use the new acpi_ghes_present()
function to check whether we should report memory errors via
acpi_ghes_record_errors().
This avoids a link error if QEMU was built without support for the
virt board, and provides a mechanism that can be used by any future
board models that want to add ACPI memory error reporting support
(they only need to call acpi_ghes_add_fw_cfg()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-4-peter.maydell@linaro.org
Currently the ARM SVE helper code defines locally some utility
functions for swapping 16-bit halfwords within 32-bit or 64-bit
values and for swapping 32-bit words within 64-bit values,
parallel to the byte-swapping bswap16/32/64 functions.
We want these also for the ARM MVE code, and they're potentially
generally useful for other targets, so move them to bitops.h.
(We don't put them in bswap.h with the bswap* functions because
they are implemented in terms of the rotate operations also
defined in bitops.h, and including bitops.h from bswap.h seems
better avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-17-peter.maydell@linaro.org
For MVE, we want to re-use the large data table from expand_pred_b().
Move the data table to vec_helper.c so it is no longer in an SVE
specific source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-14-peter.maydell@linaro.org
Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
Implement the MVE LETP insn. This is like the existing LE loop-end
insn, but it must perform an FPU-enabled check, and on loop-exit it
resets LTPSIZE to 4.
To accommodate the requirement to do something on loop-exit, we drop
the use of condlabel and instead manage both the TB exits manually,
in the same way we already do in trans_WLS().
The other MVE-specific change to the LE insn is that we must raise an
INVSTATE UsageFault insn if LTPSIZE is not 4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-10-peter.maydell@linaro.org
Implement the MVE DLSTP insn; this is like the existing DLS
insn, except that it must do an FPU access check and it
sets LTPSIZE to the value specified in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-9-peter.maydell@linaro.org
Implement the MVE WLSTP insn; this is like the existing WLS insn,
except that it specifies a size value which is used to set
FPSCR.LTPSIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-8-peter.maydell@linaro.org
Implement the MVE LCTP instruction.
We put its decode and implementation with the other
low-overhead-branch insns because although it is only present if MVE
is implemented it is logically in the same group as the other LOB
insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-7-peter.maydell@linaro.org
In commit a3494d4671 we reworked the M-profile handling of its
checks for when the NOCP exception should be raised because the FPU
is disabled, so that (in line with the architecture) the NOCP check
is done early over a large range of the encoding space, and takes
precedence over UNDEF exceptions. As part of this, we removed the
code from full_vfp_access_check() which raised an exception there for
M-profile with the FPU disabled, because it was no longer reachable.
For MVE, some instructions which are outside the "coprocessor space"
region of the encoding space must nonetheless do "is the FPU enabled"
checks and possibly raise a NOCP exception. (In particular this
covers the MVE-specific low-overhead branch insns LCTP, DLSTP and
WLSTP.) To support these insns, reinstate the code in
full_vfp_access_check(), so that their trans functions can call
vfp_access_check() and get the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-6-peter.maydell@linaro.org
On A-profile, PSR bits [15:10][26:25] are always the IT state bits.
On M-profile, some of the reserved encodings of the IT state are used
to instead indicate partial progress through instructions that were
interrupted partway through by an exception and can be resumed.
These resumable instructions fall into two categories:
(1) load/store multiple instructions, where these bits are called
"ICI" and specify the register in the ldm/stm list where execution
should resume. (Specifically: LDM, STM, VLDM, VSTM, VLLDM, VLSTM,
CLRM, VSCCLRM.)
(2) MVE instructions subject to beatwise execution, where these bits
are called "ECI" and specify which beats in this and possibly also
the following MVE insn have been executed.
There are also a few insns (LE, LETP, and BKPT) which do not use the
ICI/ECI bits but must leave them alone.
Otherwise, we should raise an INVSTATE UsageFault for any attempt to
execute an insn with non-zero ICI/ECI bits.
So far we have been able to ignore ECI/ICI, because the architecture
allows the IMPDEF choice of "always restart load/store multiple from
the beginning regardless of ICI state", so the only thing we have
been missing is that we don't raise the INVSTATE fault for bad guest
code. However, MVE requires that we honour ECI bits and do not
rexecute beats of an insn that have already been executed.
Add the support in the decoder for handling ECI/ICI:
* identify the ECI/ICI case in the CONDEXEC TB flags
* when a load/store multiple insn succeeds, it updates the ECI/ICI
state (both in DisasContext and in the CPU state), and sets a flag
to say that the ECI/ICI state was handled
* if we find that the insn we just decoded did not handle the
ECI/ICI state, we delete all the code that we just generated for
it and instead emit the code to raise the INVFAULT. This allows
us to avoid having to update every non-MVE non-LDM/STM insn to
make it check for "is ECI/ICI set?".
We continue with our existing IMPDEF choice of not caring about the
ICI state for the load/store multiples and simply restarting them
from the beginning. Because we don't allow interrupts in the middle
of an insn, the only way we would see this state is if the guest set
ICI manually on return from an exception handler, so it's a corner
case which doesn't merit optimisation.
ICI update for LDM/STM is simple -- it always zeroes the state. ECI
update for MVE beatwise insns will be a little more complex, since
the ECI state may include information for the following insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-5-peter.maydell@linaro.org
When MVE is supported, the VPR register has a place on the exception
stack frame in a previously reserved slot just above the FPSCR.
It must also be zeroed in various situations when we invalidate
FPU context.
Update the code which handles the stack frames (exception entry and
exit code, VLLDM, and VLSTM) to save/restore VPR.
Update code which invalidates FP registers (mostly also exception
entry and exit code, but also VSCCLRM and the code in
full_vfp_access_check() that corresponds to the ExecuteFPCheck()
pseudocode) to zero VPR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-4-peter.maydell@linaro.org
MVE has an FPSCR.QC bit similar to the A-profile Neon one; when MVE
is implemented make the bit writeable, both in the generic "load and
store FPSCR" helper functions and in the code for handling the NZCVQC
sysreg which we had previously left as "TODO when we implement MVE".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-3-peter.maydell@linaro.org
Currently we provide Hn and H1_n macros for accessing the correct
data within arrays of vector elements of size 1, 2 and 4, accounting
for host endianness. We don't provide any macros for elements of
size 8 because there the host endianness doesn't matter. However,
this does result in awkwardness where we need to pass empty arguments
to macros, because checkpatch complains about them. The empty
argument is a little confusing for humans to read as well.
Add H8() and H1_8() macros and use them where we were previously
passing empty arguments to macros.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-2-peter.maydell@linaro.org
Message-id: 20210610132505.5827-1-peter.maydell@linaro.org
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is after to the fp_access_check, so we need to move the
check up. Fold that in to the pairwise filter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The default of this switch is truly unreachable.
The switch selector is 3 bits, and all 8 cases are present.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is prior to the fp_access_check, so we're still good to
raise sigill here.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable BF16 again for !have_neon and !have_vfp during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMMLA for both AArch64 AdvSIMD and SVE,
and VMMLA.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFCVT{N,T} for both AArch64 AdvSIMD and SVE,
and VCVT.BF16.F32 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the 64-bit BFCVT and the 32-bit VCVT{B,T}.BF16.F32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the SVE BFLOAT16 support does not require SVE2,
it is an independent extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sequence cpu_restore_state() + raise_exception() is equivalent to
raise_exception_ra(), so use that instead. (In this case we never
cared about the syndrome value, because M-profile doesn't use the
syndrome; the old code was just written unnecessarily awkwardly.)
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Retain edited version of comment; rewrite commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that raise_exception_ra restores the state before raising the
exception we can use restore_exception_ra to perform the state restore +
exception raising without clobbering the syndrome.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Keep the one line of the comment that is still relevant]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that there are no other users of do_raise_exception, fold it into
raise_exception.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DAIF and PAC checks used raise_exception_ra to raise an exception
and unwind CPU state but raise_exception_ra is currently designed for
handling data aborts as the syndrome is partially precomputed and
encoded in the TB and then merged in merge_syn_data_abort when handling
the data abort. Using raise_exception_ra for DAIF and PAC checks
results in an empty syndrome being retrieved from data[2] in
restore_state_to_opc and setting ESR to 0. This manifested as:
kvm [571]: Unknown exception class: esr: 0x000000 –
Unknown/Uncategorized
when launching a KVM guest when the host qemu used a CPU supporting
EL2+pointer authentication and enabling pointer authentication in the
guest.
Rework raise_exception_ra such that the state is restored before raising
the exception so that the exception is not clobbered by
restore_state_to_opc.
Fixes: 0d43e1a2d2 ("target/arm: Add PAuth helpers")
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: added comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The operands to tcg_gen_atomic_fetch_s{min,max}_i64 must
be signed, so that the inputs are properly extended.
Zero extend the result afterward, as needed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/364
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210602020720.47679-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU. Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org
The M-profile FPSCR has an LTPSIZE field, but if MVE is not
implemented it is read-only and always reads as 4; this is how QEMU
currently handles it.
Make the field writable when MVE is implemented.
We can safely add the field to the MVE migration struct because
currently no CPUs enable MVE and so the migration struct is never
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-8-peter.maydell@linaro.org
If MVE is implemented for an M-profile CPU then it has a VPR
register, which tracks predication information.
Implement the read and write handling of this register, and
the migration of its state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-7-peter.maydell@linaro.org
The fp_sysreg_checks() function is supposed to be returning an
FPSysRegCheckResult, which is an enum with three possible values.
However, three places in the function "return false" (a hangover from
a previous iteration of the design where the function just returned a
bool). Make these return FPSysRegCheckFailed instead (for no
functional change, since both false and FPSysRegCheckFailed are
zero).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-6-peter.maydell@linaro.org
Split out the handling of VMOV_reg_sp and VMOV_reg_dp so that we can
permit the insns if either FP or MVE are present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-5-peter.maydell@linaro.org
The do_vfp_2op_sp() and do_vfp_2op_dp() functions currently check
whether floating point is supported via the aa32_fpdp_v2 and
aa32_fpsp_v2 isar checks. For v8.1M MVE support, the VMOV_reg trans
functions (but not any of the others) need to update this to also
allow the insn if MVE is implemented. Move the check out of the do_
function and into its callsites (which are all implemented via the
DO_VFP_2OP macro), so we have a place to change the check for the
VMOV insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-4-peter.maydell@linaro.org
Some v8M instructions are present if either the floating point
extension or MVE is implemented. Update our implementation of them
to check for MVE as well as for FP.
This is all the insns which use CheckDecodeFaults(ExtType_MveOrFp) or
CheckDecodeFaults(ExtType_MveOrDpFp) in their pseudocode, which are
essentially the loads and stores, moves and sysreg accesses, except
for VMOV_reg_sp and VMOV_reg_dp, which we handle in subsequent
patches because they need a refactor to provide a place to put the
new MVE check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-3-peter.maydell@linaro.org
Add the isar feature check functions we will need for v8.1M MVE:
* a check for MVE present: this corresponds to the pseudocode's
CheckDecodeFaults(ExtType_Mve)
* a check for the optional floating-point part of MVE: this
corresponds to CheckDecodeFaults(ExtType_MveFp)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-2-peter.maydell@linaro.org
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VirtIO devices are only meaningful with system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-17-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disable I8MM again for !have_neon during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is {S,U,US}MMLA for both AArch64 AdvSIMD and SVE,
and V{S,U,US}MMLA.S8 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-91-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a common helper, sharing decode does not
save much. Also, this will solve an upcoming naming problem.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-89-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-88-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were extracting the M register twice, once incorrectly
as M:vm and once correctly as rm. Remove the incorrect
name and remove the incorrect decode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-87-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cut and paste error from another pattern.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-86-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-85-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implements both vectored and indexed FMLALB, FMLALT, FMLSLB, FMLSLT
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-83-richard.henderson@linaro.org
Message-Id: <20200504171240.11220-1-steplong@quicinc.com>
[rth: Rearrange to use float16_to_float32_by_bits.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two copies of these, one set of which is not complete.
Move them to a common header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-82-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implements SQSHL/UQSHL, SRSHR/URSHR, and SQSHLU
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-81-richard.henderson@linaro.org
Message-Id: <20200430194159.24064-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-80-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-79-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_i32 for passing the simd descriptor,
as this hashed value does not need to be freed.
Rename dofs to doff to match poff.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-78-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The table used by do_ldrq is a subset of the table used by do_ld_zpa;
we can share them by passing dtype instead of msz to do_ldrq.
The lack of MTE handling in do_ldrq was a bug, fixed by this change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-77-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-76-richard.henderson@linaro.org
Message-Id: <20200430191405.21641-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-75-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-4-steplong@quicinc.com>
[rth: Use do_frint_mode, which avoids a specific runtime helper.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-74-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-3-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-73-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-2-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-72-richard.henderson@linaro.org
Message-Id: <20200428144352.9275-1-steplong@quicinc.com>
[rth: rearrange the macros a little and rebase]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-71-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-69-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to add more variations on this theme.
Accept the inner loop for the _h variants, rather
than keep it unrolled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-66-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to add more variations on this theme.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-65-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-64-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-63-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-62-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-61-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-60-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-59-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-58-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-57-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-56-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-55-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-54-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Used by FMLA and DOT, but will shortly be used more.
Split FMLA from FMLS to avoid an extra sub field;
similarly for SDOT from UDOT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-53-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently only used by FMUL, but will shortly be used more.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-52-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For SVE, we potentially have a 4th argument coming from the
movprfx instruction. Currently we do not optimize movprfx,
so the problem is not visible.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-51-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For SVE, we potentially have a 4th argument coming from the
movprfx instruction. Currently we do not optimize movprfx,
so the problem is not visible.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-50-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The signed dot product routines produce a signed result.
Since we use -fwrapv, there is no functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-49-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-48-richard.henderson@linaro.org
Message-Id: <20200423180347.9403-1-steplong@quicinc.com>
[rth: Rename the trans_* functions to *_sve2.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-47-richard.henderson@linaro.org
Message-Id: <20200422165503.13511-1-steplong@quicinc.com>
[rth: Fix indexing in helpers, expand macro to straight functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add decoding logic for SVE2 64-bit/32-bit scatter non-temporal
store insns.
64-bit
* STNT1B (vector plus scalar)
* STNT1H (vector plus scalar)
* STNT1W (vector plus scalar)
* STNT1D (vector plus scalar)
32-bit
* STNT1B (vector plus scalar)
* STNT1H (vector plus scalar)
* STNT1W (vector plus scalar)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-45-richard.henderson@linaro.org
Message-Id: <20200422141553.8037-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In addition, use the same vector generator interface for AdvSIMD.
This fixes a bug in which the AdvSIMD insn failed to clear the
high bits of the SVE register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-43-richard.henderson@linaro.org
Message-Id: <20200416173109.8856-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This completes the section 'SVE2 integer add/subtract narrow high part'
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-42-richard.henderson@linaro.org
Message-Id: <20200417162231.10374-5-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-41-richard.henderson@linaro.org
Message-Id: <20200417162231.10374-4-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-40-richard.henderson@linaro.org
Message-Id: <20200417162231.10374-3-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-39-richard.henderson@linaro.org
Message-Id: <20200417162231.10374-2-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE2 has two additional sizes of the operation and unlike NEON,
there is no saturation flag. Create new entry points for SVE2
that do not set QC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-34-richard.henderson@linaro.org
Message-Id: <20200415145915.2859-1-steplong@quicinc.com>
[rth: Expanded comment for do_match2]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the existing sve_while (less-than) helper to sve_whilel
to make room for a new sve_whileg helper for greater-than.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This completes the section "SVE2 bitwise shift right narrow".
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exclude PMULL from this category for the moment.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split these operations out into a header that can be shared
between neon and sve. The "sat" pointer acts both as a boolean
for control of saturating behavior and controls the difference
in behavior between neon and sve -- QC bit or no QC bit.
Widen the shift operand in the new helpers, as the SVE2 insns treat
the whole input element as significant. For the neon uses, truncate
the shift to int8_t while passing the parameter.
Implement right-shift rounding as
tmp = src >> (shift - 1);
dst = (tmp >> 1) + (tmp & 1);
This is the same number of instructions as the current
tmp = 1 << (shift - 1);
dst = (src + tmp) >> shift;
without any possibility of intermediate overflow.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For MUL, we can rely on generic support. For SMULH and UMULH,
create some trivial helpers. For PMUL, back in a21bb78e58,
we organized helper_gvec_pmul_b in preparation for this use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Will be used for SVE2 isa subset enablement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indicate support for FEAT_TLBIOS and FEAT_TLBIRANGE by setting
ID_AA64ISAR0.TLB to 2 for the max AARCH64 CPU type.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-4-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8.4 adds the mandatory FEAT_TLBIOS. It provides TLBI
maintenance instructions that extend to the Outer Shareable domain.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8.4 adds the mandatory FEAT_TLBIRANGE. It provides TLBI
maintenance instructions that apply to a range of input addresses.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When an M-profile CPU is restoring registers from the stack on
exception return, the stack pointer to use is determined based on
bits in the magic exception return type value. We were not getting
this logic entirely correct.
Whether we use one of the Secure stack pointers or one of the
Non-Secure stack pointers depends on the EXCRET.S bit. However,
whether we use the MSP or the PSP then depends on the SPSEL bit in
either the CONTROL_S or CONTROL_NS register. We were incorrectly
selecting MSP vs PSP based on the EXCRET.SPSEL bit.
(In the pseudocode this is in the PopStack() function, which calls
LookUpSp_with_security_mode() which in turn looks at the relevant
CONTROL.SPSEL bit.)
The buggy behaviour wasn't noticeable in most cases, because we write
EXCRET.SPSEL to the CONTROL.SPSEL bit for the S/NS register selected
by EXCRET.ES, so we only do the wrong thing when EXCRET.S and
EXCRET.ES are different. This will happen when secure code takes a
secure exception, which then tail-chains to a non-secure exception
which finally returns to the original secure code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520130905.2049-1-peter.maydell@linaro.org
tb_gen_code() assumes that tb->size must never be zero, otherwise it
may produce spurious exceptions. For ARM this may happen when creating
a translation block for the commpage.
Fix by pretending that commpage translation blocks have at least one
instruction.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210416154939.32404-3-iii@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The WFI insn is not system-mode only, though it doesn't usually make
a huge amount of sense for userspace code to execute it. Currently
if you try it in qemu-arm then the helper function will raise an
EXCP_HLT exception, which is not covered by the switch in cpu_loop()
and results in an abort:
qemu: unhandled CPU exception 0x10001 - aborting
R00=00000001 R01=408003e4 R02=408003ec R03=000102ec
R04=00010a28 R05=00010158 R06=00087460 R07=00010158
R08=00000000 R09=00000000 R10=00085b7c R11=408002a4
R12=408002b8 R13=408002a0 R14=0001057c R15=000102f8
PSR=60000010 -ZC- A usr32
qemu:handle_cpu_signal received signal outside vCPU context @ pc=0x7fcbfa4f0a12
Make the WFI helper function return immediately in the usermode
emulator. This turns WFI into a NOP, which is OK because:
* architecturally "WFI is a NOP" is a permitted implementation
* aarch64 Linux kernels use the SCTLR_EL1.nTWI bit to trap
userspace WFI and NOP it (though aarch32 kernels currently
just let WFI do whatever it would do)
We could in theory make the translate.c code special case user-mode
emulation and NOP the insn entirely rather than making the helper
do nothing, but because no real world code will be trying to
execute WFI we don't care about efficiency and the helper provides
a single place where we can make the change rather than having
to touch multiple places in translate.c and translate-a64.c.
Fixes: https://bugs.launchpad.net/qemu/+bug/1926759
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430162212.825-1-peter.maydell@linaro.org
Switch translate-neon.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-14-peter.maydell@linaro.org
Make the remaining functions needed by the translate-neon code
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-13-peter.maydell@linaro.org
Move the NeonGenThreeOpEnvFn typedef to translate.h together
with the other similar typedefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-12-peter.maydell@linaro.org
The VFPGenFixPointFn typedef is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-11-peter.maydell@linaro.org
The function vfp_reg_ptr() is used only in translate-neon.c.inc;
move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-10-peter.maydell@linaro.org
Switch translate-vfp.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-9-peter.maydell@linaro.org
Make the remaining functions which are needed by translate-vfp.c.inc
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-8-peter.maydell@linaro.org
The functions vfp_load_reg32(), vfp_load_reg64(), vfp_store_reg32()
and vfp_store_reg64() are used only in translate-vfp.c.inc. Move
them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-7-peter.maydell@linaro.org
Move the various gen_aa32* functions and macros out of translate.c
and into translate-a32.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-6-peter.maydell@linaro.org
Currently the trans functions for m-nocp.decode all live in
translate-vfp.inc.c; move them out into their own translation unit,
translate-m-nocp.c.
The trans_* functions here are pure code motion with no changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-5-peter.maydell@linaro.org
We want to split out the .c.inc files which are currently included
into translate.c so they are separate compilation units. To do this
we need to make some functions which are currently file-local to
translate.c have global scope; create a translate-a32.h paralleling
the existing translate-a64.h as a place for these declarations to
live, so that code moved into the new compilation units can call
them.
The functions made global here are those required by the
m-nocp.decode functions, except that I have converted the whole
family of {read,write}_neon_element* and also both the load_cpu and
store_cpu functions for consistency, even though m-nocp only wants a
few functions from each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-4-peter.maydell@linaro.org
The unallocated_encoding() function is the same in both
translate-a64.c and translate.c; make the translate.c function global
and drop the translate-a64.c version. To do this we need to also
share gen_exception_insn(), which currently exists in two slightly
different versions for A32 and A64: merge those into a single
function that can work for both.
This will be useful for splitting up translate.c, which will require
unallocated_encoding() to no longer be file-local. It's also
hopefully less confusing to have only one version of the function
rather than two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-3-peter.maydell@linaro.org
Some of the constant expanders defined in translate.c are generically
useful and will be used by the separate C files for VFP and Neon once
they are created; move the expander definitions to translate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-2-peter.maydell@linaro.org
In tlbi_aa64_vae2is_write() the calculation
bits = tlbbits_for_regime(env, secure ? ARMMMUIdx_E2 : ARMMMUIdx_SE2,
pageaddr)
has the two arms of the ?: expression reversed. Fix the bug.
Fixes: b6ad6062f1
Reported-by: Rebecca Cran <rebecca@nuviainc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Message-id: 20210420123106.10861-1-peter.maydell@linaro.org
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For 128-bit load/store, use 16-byte alignment. This
requires that we perform the two operations in the
correct order so that we generate the alignment fault
before modifying memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case of gpr load, merge the size and is_signed arguments;
otherwise, simply convert size to memop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adjust the interface to match what has been done to the
TCGv_i32 load/store functions.
This is less obvious, because at present the only user of
these functions, trans_VLDST_multiple, also wants to manipulate
the endianness to speed up loading multiple bytes. Thus we
retain an "internal" interface which is identical to the
current gen_aa32_{ld,st}_i64 interface.
The "new" interface will gain users as we remove the legacy
interfaces, gen_aa32_ld64 and gen_aa32_st64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just because operating on a TCGv_i64 temporary does not
mean that we're performing a 64-bit operation. Restrict
the frobbing to actual 64-bit operations.
This bug is not currently visible because all current
users of these two functions always pass MO_64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only caller. Adjust some commentary to talk
about SCTLR_B instead of the vanishing function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a finalize_memop function that computes alignment and
endianness and returns the final MemOp for the operation.
Split out gen_aa32_{ld,st}_internal_i32 which bypasses any special
handling of endianness or alignment. Adjust gen_aa32_{ld,st}_i32
so that s->be_data is not added by the callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this to signal when memory access alignment is required.
This value comes from the CCR register for M-profile, and
from the SCTLR register for A-profile.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that other bits have been moved out of tb->flags,
there's no point in filling from the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these bits have been moved out of tb->flags,
where TBFLAG_ANY was filling from the top, move AM32
to fill from the top, and A32 and M32 to fill from the
bottom. This means fewer changes when adding new bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have all of the proper macros defined, expanding
the CPUARMTBFlags structure and populating the two TB fields
is relatively simple.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for splitting tb->flags across multiple
fields, introduce a structure to hold the value(s).
So far this only migrates the one uint32_t and fixes
all of the places that require adjustment to match.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to split tbflags into two parts. These macros
will ensure that the correct part is used with the correct
set of bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So PSTATE_SS -> PSTATE__SS in the uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So SCTLR_B -> SCTLR__B in the 3 uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The encoding of size = 2 and size = 3 had the incorrect decode
for align, overlapping the stride field. This error was hidden
by what should have been unnecessary masking in translate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The log2_esize parameter is not used except trivially.
Drop the parameter and the deferral to gen_mte_check1.
This fixes a bug in that the parameters as documented
in the header file were the reverse from those in the
implementation. Which meant that translate-sve.c was
passing the parameters in the wrong order.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that mte_check1 and mte_checkN have been merged, we can
merge sve_cont_ldst_mte_check1 and sve_cont_ldst_mte_checkN.
Which means that we can eliminate the function pointer into
sve_ldN_r and sve_stN_r, calling sve_cont_ldst_mte_check directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For consistency with the mte_check1 + mte_checkN merge
to mte_check, rename the probe function as well.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte_check1 and mte_checkN functions are now identical.
Drop mte_check1 and rename mte_checkN to mte_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After recent changes, mte_checkN does not use ESIZE,
and mte_check1 never used TSIZE. We can combine the
two into a single field: SIZEM1.
Choose to pass size - 1 because size == 0 is never used,
our immediate need in mte_probe_int is for the address
of the last byte (ptr + size - 1), and since almost all
operations are powers of 2, this makes the immediate
constant one bit smaller.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
We cannot tell a priori whether or not a given scalar access is aligned,
therefore we must at least check. Use mte_probe_int, which is already
set up for checking multiple granules.
Buglink: https://bugs.launchpad.net/bugs/1921948
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper function from mte_checkN to perform
all of the checking and address manpulation. So far,
just use this in mte_checkN itself.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
Therefore, the first failure is always either the first byte of the
access, or the first byte of the granule.
In addition, some of the arithmetic is off for last-first -> count.
This does not become directly visible until a later patch that passes
single bytes into this function, so ptr == ptr_last.
Buglink: https://bugs.launchpad.net/bugs/1921948
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm ARM specifies that for Thumb encodings of the various plain
store insns, if the Rn field is 1111 then we must UNDEF. This is
different from the Arm encodings, where this case is either
UNPREDICTABLE or has well-defined behaviour. The exclusive stores,
store-release and STRD do not have this UNDEF case for any encoding.
Enforce the UNDEF for this case in the Thumb plain store insns.
Fixes: https://bugs.launchpad.net/qemu/+bug/1922887
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210408162402.5822-1-peter.maydell@linaro.org
This is a left over erroneous check from the days front-ends handled
io start/end themselves. Regardless just because IO could be performed
on the last instruction doesn't obligate the front end to do so.
This fixes an abort faced by the aspeed execute-in-place support which
will necessarily trigger this state (even before the one-shot
CF_LAST_IO fix). The test still seems to hang once it attempts to boot
the Linux kernel but I suspect this is an unrelated issue with icount
and the timer handling code.
The original intention of the cpu_abort (added in commit 2e70f6efa8
when the icount stuff was first added) seems to have been to act as
an assert() to catch an unhandled corner case where the generated code
would be something like:
conditional branch to condlabel if its cc failed
implementation of the insn (a conditional branch or trap)
code emitted by gen_io_end()
condlabel:
gen_goto_tb or equivalent thing to go to next insn
At runtime the cc-failed case would skip over the code emitted by
gen_io_end(), leaving the can_do_io flag incorrectly set.
In commit ba3e792669 we switched to an implementation which
always clears can_do_io at the start of the following TB instead
of trying to clear it at the end of a TB that did IO. So the corner
case that this cpu_abort() was trying to flag is no longer possible,
because the gen_io_end() call has been deleted. We can therefore
safely remove the no-longer-valid assertion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210416170207.12504-1-alex.bennee@linaro.org
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can remove PAGE_WRITE when (internally) marking a page
read-only because it contains translated code.
This can be triggered by tests/tcg/aarch64/bti-2, after
having serviced SIGILL trampolines on the stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pretend the fault always happens at page table level 3.
Failure to set this leaves level = 0, which is impossible for
ARMFault_Permission, and produces an invalid syndrome, which
reaches g_assert_not_reached in cpu_loop.
Fixes: 8db94ab4e5 ("linux-user/aarch64: Pass syndrome to EXC_*_ABORT")
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210320000606.1788699-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For Arm M-profile CPUs, on reset the CPU must load its initial PC and
SP from a vector table in guest memory. Because we can't guarantee
reset ordering, we have to handle the possibility that the ROM blob
loader's reset function has not yet run when the CPU resets, in which
case the data in an ELF file specified by the user won't be in guest
memory to be read yet.
We work around the reset ordering problem by checking whether the ROM
blob loader has any data for the address where the vector table is,
using rom_ptr(). Unfortunately this does not handle the possibility
of memory aliasing. For many M-profile boards, memory can be
accessed via multiple possible physical addresses; if the board has
the vector table at address X but the user's ELF file loads data via
a different address Y which is an alias to the same underlying guest
RAM then rom_ptr() will not find it.
Use the new rom_ptr_for_as() function, which deals with memory
aliasing when locating a relevant ROM blob.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210318174823.18066-6-peter.maydell@linaro.org
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the
upper bound of the IPA size. If that bound is lower than the highest
possible GPA for the machine, then QEMU will error out. However, the
IPA is set to 40 when the highest GPA is less than or equal to 40,
even when KVM may support an IPA limit as low as 32. This means KVM
may fail the VM creation unnecessarily. Additionally, 40 is selected
with the value 0, which means use the default, and that gets around
a check in some versions of KVM, causing a difficult to debug fail.
Always use the IPA size that corresponds to the highest possible GPA,
unless it's lower than 32, in which case use 32. Also, we must still
use 0 when KVM only supports the legacy fixed 40 bit IPA.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Message-id: 20210310135218.255205-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the reduction operations, we intentionally increase maxsz to
the next power of 2, so as to fill out the reduction tree correctly.
Since e2e7168a21, oprsz must equal maxsz, with exceptions for small
vectors, so this triggers an assertion for vector sizes > 32 that are
not themselves a power of 2.
Pass the power-of-two value in the simd_data field instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with punpk1 with vl % 512 != 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with low-half zip (zip1) with vl % 512 != 0.
Adjust all of the x + (y << s) to x | (y << s) as a style fix.
We only ever have exact overlap between D, M, and N. Therefore
we only need a single temporary, and we do not need to check for
partial overlap.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed out on compressing the second half of a predicate
with length vl % 512 > 256.
Adjust all of the x + (y << s) to x | (y << s) as a
general style fix. Drop the extract64 because the input
uint64_t are known to be already zero-extended from the
current size of the predicate.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").
A KVM-only build won't be able to run TCG cpus, move the
v7A CPU definitions to cpu_tcg.c.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210306151801.2388182-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will move this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210221222617.2579610-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IDAU is specific to M-profile. KVM only supports A-profile.
Restrict this interface to TCG, as it is pointless (and
confusing) on a KVM-only build.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210221222617.2579610-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Section D6.7 of the ARM ARM states:
For the purpose of determining Tag Check Fault handling, unprivileged
load and store instructions are treated as if executed at EL0 when
executed at either:
- EL1, when the Effective value of PSTATE.UAO is 0.
- EL2, when both the Effective value of HCR_EL2.{E2H, TGE} is {1, 1}
and the Effective value of PSTATE.UAO is 0.
ARM has confirmed a defect in the pseudocode function
AArch64.TagCheckFault that makes it inconsistent with the above
wording. The remedy is to adjust references to PSTATE.EL in that
function to instead refer to AArch64.AccessUsesEL(acctype), so
that unprivileged instructions use SCTLR_EL1.TCF0 and TFSRE0_EL1.
The exception type for synchronous tag check faults remains unchanged.
This patch implements the described change by partially reverting
commits 50244cc76a and cc97b0019b.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219201820.2672077-1-pcc@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always perform one call instead of two for 16-byte operands.
Use byte loads/stores directly into the vector register file
instead of extractions and deposits to a 64-bit local variable.
In order to easily receive pointers into the vector register file,
convert the helper to the gvec out-of-line signature. Move the
helper into vec_helper.c, where it can make use of H1 and clear_tail.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210224230532.276878-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set ID_AA64PFR1_EL1.SSBS to 2 and ID_PFR2.SSBS to 1.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_SSBS. SSBS (Speculative Store Bypass Safe) is an
optional feature in ARMv8.0, and mandatory in ARMv8.5.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This also means we don't need an extra declaration of
the structure in hw/core/cpu.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-2-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-11-alex.bennee@linaro.org>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the now-saved PAGE_ANON and PAGE_MTE bits,
and the per-page saved data.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's
state on any kernel entry (interrupt, exception etc), and then delivers
the signal in advance of resuming the thread.
This means that while the signal won't be delivered immediately, it will
not be delayed forever -- at minimum it will be delivered after the next
clock interrupt.
We don't have a clock interrupt in linux-user, so we issue a cpu_kick
to signal a return to the main loop at the end of the current TB.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A proper syndrome is required to fill in the proper si_code.
Use page_get_flags to determine permission vs translation for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move everything related to syndromes to a new file,
which can be shared with linux-user.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2.
Otherwise this does not yet have effect.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were fudging TBI1 enabled to speed up the generated code.
Now that we've improved the code generation, remove this.
Also, tidy the comment to reflect the current code.
The pauth test was testing a kernel address (-1) and making
incorrect assumptions about TBI1; stick to userland addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use simple arithmetic instead of a conditional
move when tbi0 != tbi1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the prctl bit that controls whether syscalls accept tagged
addresses. See Documentation/arm64/tagged-address-abi.rst in the
linux kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When working with performance monitoring counters, we look at
MDCR_EL2.HPMN as part of the check whether a counter is enabled. This
check fails, because MDCR_EL2.HPMN is reset to 0, meaning that no
counters are "enabled" for < EL2.
That's in violation of the Arm specification, which states that
> On a Warm reset, this field [MDCR_EL2.HPMN] resets to the value in
> PMCR_EL0.N
That's also what a comment in the code acknowledges, but the necessary
adjustment seems to have been forgotten when support for more counters
was added.
This change fixes the issue by setting the reset value to PMCR.N, which
is four.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpsr has been treated as being the same as spsr, but it isn't.
Since PSTATE_SS isn't in cpsr, remove it and move it into env->pstate.
This allows us to add support for CPSR_DIT, adding helper functions
to merge SPSR_ELx to and from CPSR.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210208065700.19454-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_DIT. DIT (Data Independent Timing) is a required
feature for ARMv8.4. Since virtual machine execution is largely
nondeterministic and TCG is outside of the security domain, it's
implemented as a NOP.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210208065700.19454-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FW and AW bits of SCR_EL3 are RES1 only in some contexts. Force them
to 1 only when there is no support for AArch32 at EL1 or above.
The reset value will be 0x30 only if the CPU is AArch64-only; if there
is support for AArch32 at EL1 or above, it will be reset to 0.
Also adds helper function isar_feature_aa64_aa32_el1 to check if AArch32
is supported at EL1 or above.
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210203165552.16306-2-michael.nawrocki@gtri.gatech.edu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As feature flags are added or removed, the meanings of bits in the
`features` field can change between QEMU versions, causing migration
failures. Additionally, migrating the field is not useful because it is
a constant function of the CPU being used.
Fixes: LP:1914696
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 568496c0c0 ("cpu: Add callback to check architectural") and
commit 3826121d92 ("target-arm: Implement checking of fired")
introduced an ARM-specific hack for cpu_check_watchpoint.
Make debug_check_watchpoint optional, and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-15-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 4061200059 ("arm: Correctly handle watchpoints for BE32 CPUs")
introduced this ARM-specific, TCG-specific hack to adjust the address,
before checking it with cpu_check_watchpoint.
Make adjust_watchpoint_address optional and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-14-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
make it consistently SOFTMMU-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: make the field presence in cpu.h unconditional, removing the ifdefs]
Message-Id: <20210204163931.7358-12-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cc->do_interrupt is in theory a TCG callback used in accel/tcg only,
to prepare the emulated architecture to take an interrupt as defined
in the hardware specifications,
but in reality the _do_interrupt style of functions in targets are
also occasionally reused by KVM to prepare the architecture state in a
similar way where userspace code has identified that it needs to
deliver an exception to the guest.
In the case of ARM, that includes:
1) the vcpu thread got a SIGBUS indicating a memory error,
and we need to deliver a Synchronous External Abort to the guest to
let it know about the error.
2) the kernel told us about a debug exception (breakpoint, watchpoint)
but it is not for one of QEMU's own gdbstub breakpoints/watchpoints
so it must be a breakpoint the guest itself has set up, therefore
we need to deliver it to the guest.
So in order to reuse code, the same arm_do_interrupt function is used.
This is all fine, but we need to avoid calling it using the callback
registered in CPUClass, since that one is now TCG-only.
Fortunately this is easily solved by replacing calls to
CPUClass::do_interrupt() with explicit calls to arm_do_interrupt().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210204163931.7358-9-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only define the register if it exists for the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120031656.737646-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building with GCC 10.2 configured with --extra-cflags=-Os, we get:
target/arm/m_helper.c: In function ‘arm_v7m_cpu_do_interrupt’:
target/arm/m_helper.c:1811:16: error: ‘restore_s16_s31’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1811 | if (restore_s16_s31) {
| ^
target/arm/m_helper.c:1350:10: note: ‘restore_s16_s31’ was declared here
1350 | bool restore_s16_s31;
| ^~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Initialize the 'restore_s16_s31' variable to silence the warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210119062739.589049-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update all users of do_perm_pred3 for the new
predicate descriptor field definitions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These two were odd, in that do_pfirst_pnext passed the
count of 64-bit words rather than bytes. Change to pass
the standard pred_full_reg_size to avoid confusion.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE predicate operations cannot use the "usual" simd_desc
encoding, because the lengths are not a multiple of 8.
But we were abusing the SIMD_* fields to store values anyway.
This abuse broke when SIMD_OPRSZ_BITS was modified in e2e7168a21.
Introduce a new set of field definitions for exclusive use
of predicates, so that it is obvious what kind of predicate
we are manipulating. To be used in future patches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds handling for the SCR_EL3.EEL2 bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Message-id: 20210112104511.36576-17-remi.denis.courmont@huawei.com
[PMM: Applied fixes for review issues noted by RTH:
- check for FEATURE_AARCH64 before checking sel2 isar feature
- correct the commit message subject line]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARMv8-A, accesses by 32-bit secure EL1 to monitor registers trap to
the upper (64-bit) EL. With Secure EL2 support, we can no longer assume
that that is always EL3, so make room for the value to be computed at
run-time.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-16-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The stage_1_mmu_idx() already effectively keeps track of which
translation regimes have two stages. Don't hard-code another test.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-13-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the secure stage 2 translation regime, the VSTCR.SW and VTCR.NSW
bits can invert the secure flag for pagetable walks. This patchset
allows S1_ptw_translate() to change the non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-11-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VTTBR write callback so far assumes that the underlying VM lies in
non-secure state. This handles the secure state scenario.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-10-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in
secure mode, though it can only be AArch64.
This patch adds the target EL for exceptions from 64-bit S-EL2.
It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure
mode. Those values were never used in practice as the effective value of
HCR was always 0 in secure mode.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a common helper to compute the effective value of MDCR_EL2.
That is the actual value if EL2 is enabled in the current security
context, or 0 elsewise.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will simplify accessing HCR conditionally in secure state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this context, the HCR value is the effective value, and thus is
zero in secure mode. The tests for HCR.{F,I}MO are sufficient.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
This commit renames two files which provide ARM semihosting support so
that they can be shared by other architectures:
1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c
2. linux-user/arm/semihost.c -> linux-user/semihost.c
The build system was modified use a new config variable,
CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM
softmmu and linux-user default configs. The contents of the source
files has not been changed in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
[AJB: rename arm-compat-semi, select SEMIHOSTING]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107170717.2098982-2-keithp@keithp.com>
Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
In commit cd8be50e58 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.
Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
TminLine field in bits [37:32].
Extend the ctr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-4-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds for the Small Translation tables extension in AArch64 state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(),
timer_free() to free the timer. The timer_deinit() step in this was always
unnecessary, and now the timer_del() is implied by timer_free(), so we can
collapse this down to simply calling timer_free().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-5-peter.maydell@linaro.org
Now that we have implemented all the features needed by the v8.1M
architecture, we can add the model of the Cortex-M55. This is the
configuration without MVE support; we'll add MVE later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-5-peter.maydell@linaro.org
Implement the v8.1M FPCXT_NS floating-point system register. This is
a little more complicated than FPCXT_S, because it has specific
handling for "current FP state is inactive", and it only wants to do
PreserveFPState(), not the full set of actions done by
ExecuteFPCheck() which vfp_access_check() implements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-4-peter.maydell@linaro.org
In commit 64f863baee we implemented the v8.1M FPCXT_S register,
but we got the write behaviour wrong. On read, this register reads
bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't
just write back those bits -- it writes a value to the whole FPSCR,
whose upper 4 bits are zeroes.
We also incorrectly implemented the write-to-FPSCR as a simple store
to vfp.xregs; this skips the "update the softfloat flags" part of
the vfp_set_fpscr helper so the value would read back correctly but
not actually take effect.
Fix both of these things by doing a complete write to the FPSCR
using the helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-3-peter.maydell@linaro.org
In 50244cc76a we updated mte_check_fail to match the ARM
pseudocode, using the correct EL to select the TCF field.
But we failed to update MTE0_ACTIVE the same way, which led
to g_assert_not_reached().
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/bugs/1907137
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201221204426.88514-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201111183823.283752-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
* the old T1 encodings UNDEF if the implementation implements 32
Dregs (this is currently architecturally impossible for M-profile)
* the new T2 encodings have the implementation-defined option to
read from memory (discarding the data) or write UNKNOWN values to
memory for the stack slots that would be D16-D31
We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org
In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.
(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)
The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org
In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP). (In previous versions of the architecture this was either
required or IMPDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org
In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.
In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV). Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org
Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org
We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
Implement the new-in-v8.1M VLDR/VSTR variants which directly
read or write FP system registers to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-10-peter.maydell@linaro.org
The constant-expander functions like negate, plus_2, etc, are
generally useful; move them up in translate.c so we can use them in
the VFP/Neon decoders as well as in the A32/T32/T16 decoders.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-9-peter.maydell@linaro.org
Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR. In v8.1M things become significantly more complicated
in two ways:
* there are several new FP system registers; some have side effects
on read, and one (FPCXT_NS) needs to avoid the usual
vfp_access_check() and the "only if FPU implemented" check
* all sysregs are now accessible both by VMRS/VMSR (which
reads/writes a general purpose register) and also by VLDR/VSTR
(which reads/writes them directly to memory)
Refactor the structure of how we handle VMSR/VMRS to cope with this:
* keep the M-profile code entirely separate from the A-profile code
* abstract out the "read or write the general purpose register" part
of the code into a loadfn or storefn function pointer, so we can
reuse it for VLDR/VSTR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org
For M-profile before v8.1M, the only valid register for VMSR/VMRS is
the FPSCR. We have a comment that states this, but the actual logic
to forbid accesses for any other register value is missing, so we
would end up with A-profile style behaviour. Add the missing check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-7-peter.maydell@linaro.org
In v8.1M the new CLRM instruction allows zeroing an arbitrary set of
the general-purpose registers and APSR. Implement this.
The encoding is a subset of the LDMIA T2 encoding, using what would
be Rn=0b1111 (which UNDEFs for LDMIA).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-6-peter.maydell@linaro.org
Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.
Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org
In arm_cpu_realizefn() we check whether the board code disabled EL3
via the has_el3 CPU object property, which we create if the CPU
starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then
we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in
the ID_PFR1 and ID_AA64PFR0 registers.
This codepath was incorrectly being taken for M-profile CPUs, which
do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have
the M-profile Security extension and so should have non-zero values
in the ID_PFR1.Security field.
Restrict the handling of the feature flag to A/R-profile cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-4-peter.maydell@linaro.org
In v8.1M the PXN architecture extension adds a new PXN bit to the
MPU_RLAR registers, which forbids execution of code in the region
from a privileged mode.
This is another feature which is just in the generic "in v8.1M" set
and has no ID register field indicating its presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-3-peter.maydell@linaro.org
The semihosting SYS_HEAPINFO call is supposed to return an array
of four guest addresses:
* base of heap memory
* limit of heap memory
* base of stack memory
* limit of stack memory
Some semihosting programs (including those compiled to use the
'newlib' embedded C library) use this call to work out where they
should initialize themselves to.
QEMU's implementation when in system emulation mode is very
simplistic: we say that the heap starts halfway into RAM and
continues to the end of RAM, and the stack starts at the top of RAM
and works down to the bottom. Unfortunately the code assumes that
the base address of RAM is at address 0, so on boards like 'virt'
where this is not true the addresses returned will all be wrong and
the guest application will usually crash.
Conveniently since all Arm boards call arm_load_kernel() we have the
base address of the main RAM block in the arm_boot_info struct which
is accessible via the CPU object. Use this to return sensible values
from SYS_HEAPINFO.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201119092346.32356-1-peter.maydell@linaro.org
Using a target unsigned long would limit the Input Address to a LPAE
page-walk to 32 bits on AArch32 and 64 bits on AArch64. This is okay
for stage 1 or on AArch64, but it is insufficient for stage 2 on
AArch32. In that later case, the Input Address can have up to 40 bits.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201118150414.18360-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122913.19561-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Checks for UNDEF cases should go before the "is VFP enabled?" access
check, except in special cases. Move a stray UNDEF check in the VTBL
trans function up above the access check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201109145324.2859-1-peter.maydell@linaro.org
The helper function did not get updated when we reorganized
the vector register file for SVE. Since then, the neon dregs
are non-sequential and cannot be simply indexed.
At the same time, make the helper function operate on 64-bit
quantities so that we do not have to call it twice.
Fixes: c39c2b9043
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use aa32_vfp_dreg() rather than opencoding]
Message-id: 20201105171126.88014-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-3-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-2-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to
armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el().
This is incorrect when the security state being queried is not the
current one, because arm_current_el() uses the current security state
to determine which of the banked CONTROL.nPRIV bits to look at.
The effect was that if (for instance) Secure state was in privileged
mode but Non-Secure was not then we would return the wrong MMU index.
The only places where we are using this function in a way that could
trigger this bug are for the stack loads during a v8M function-return
and for the instruction fetch of a v8M SG insn.
Fix the bug by expanding out the M-profile version of the
arm_current_el() logic inline so it can use the passed in secstate
rather than env->v7m.secure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201022164408.13214-1-peter.maydell@linaro.org
Secure mode is not exempted from checking SCR_EL3.TLOR, and in the
future HCR_EL2.TLOR when S-EL2 is enabled.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HCR should be applied when NS is set, not when it is cleared.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The helper functions for performing the udot/sdot operations against
a scalar were not using an address-swizzling macro when converting
the index of the scalar element into a pointer into the vm array.
This had no effect on little-endian hosts but meant we generated
incorrect results on big-endian hosts.
For these insns, the index is indexing over group of 4 8-bit values,
so 32 bits per indexed entity, and H4() is therefore what we want.
(For Neon the only possible input indexes are 0 and 1.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-3-peter.maydell@linaro.org
In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error
meant we were using the H4() address swizzler macro rather than the
H2() which is required for 2-byte data. This had no effect on
little-endian hosts but meant we put the result data into the
destination Dreg in the wrong order on big-endian hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-2-peter.maydell@linaro.org
We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only uses of this function are for loading VFP
double-precision values, and nothing to do with NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace all uses of neon_load/store_reg64 within translate-neon.c.inc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only uses of this function are for loading VFP
single-precision values, and nothing to do with NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can then use this to improve VMOV (scalar to gp) and
VMOV (gp to scalar) so that we simply perform the memory
operation that we wanted, rather than inserting or
extracting from a 32-bit quantity.
These were the last uses of neon_load/store_reg, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model these off the aa64 read/write_vec_element functions.
Use it within translate-neon.c.inc. The new functions do
not allocate or free temps, so this rearranges the calling
code a bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This seems a bit more readable than using offsetof CPU_DoubleU.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the only users of neon_reg_offset, so remove that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will shortly have users outside of translate-neon.c.inc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function makes it clear that we're talking about the whole
register, and not the 32-bit piece at index 0. This fixes a bug
when running on a big-endian host.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Transform the prot bit to a qemu internal page bit, and save
it in the page tables.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the M-profile low-overhead-branch extension is implemented, FPSCR
bits [18:16] are a new field LTPSIZE. If MVE is not implemented
(currently always true for us) then this field always reads as 4 and
ignores writes.
These bits used to be the vector-length field for the old
short-vector extension, so we need to take care that they are not
misinterpreted as setting vec_len. We do this with a rearrangement
of the vfp_set_fpscr() code that deals with vec_len, vec_stride
and also the QC bit; this obviates the need for the M-profile
only masking step that we used to have at the start of the function.
We provide a new field in CPUState for LTPSIZE, even though this
will always be 4, in preparation for MVE, so we don't have to
come back later and split it out of the vfp.xregs[FPSCR] value.
(This state struct field will be saved and restored as part of
the FPSCR value via the vmstate_fpscr in machine.c.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-11-peter.maydell@linaro.org
M-profile CPUs with half-precision floating point support should
be able to write to FPSCR.FZ16, but an M-profile specific masking
of the value at the top of vfp_set_fpscr() currently prevents that.
This is not yet an active bug because we have no M-profile
FP16 CPUs, but needs to be fixed before we can add any.
The bits that the masking is effectively preventing from being
set are the A-profile only short-vector Len and Stride fields,
plus the Neon QC bit. Rearrange the order of the function so
that those fields are handled earlier and only under a suitable
guard; this allows us to drop the M-profile specific masking,
making FZ16 writeable.
This change also makes the QC bit correctly RAZ/WI for older
no-Neon A-profile cores.
This refactoring also paves the way for the low-overhead-branch
LTPSIZE field, which uses some of the bits that are used for
A-profile Stride and Len.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-10-peter.maydell@linaro.org
In arm_cpu_realizefn(), if the CPU has VFP or Neon disabled then we
squash the ID register fields so that we don't advertise it to the
guest. This code was written for A-profile and needs some tweaks to
work correctly on M-profile:
* A-profile only fields should not be zeroed on M-profile:
- MVFR0.FPSHVEC,FPTRAP
- MVFR1.SIMDLS,SIMDINT,SIMDSP,SIMDHP
- MVFR2.SIMDMISC
* M-profile only fields should be zeroed on M-profile:
- MVFR1.FP16
In particular, because MVFR1.SIMDHP on A-profile is the same field as
MVFR1.FP16 on M-profile this code was incorrectly disabling FP16
support on an M-profile CPU (where has_neon is always false). This
isn't a visible bug yet because we don't have any M-profile CPUs with
FP16 support, but the change is necessary before we introduce any.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-9-peter.maydell@linaro.org
v8.1M's "low-overhead-loop" extension has three instructions
for looping:
* DLS (start of a do-loop)
* WLS (start of a while-loop)
* LE (end of a loop)
The loop-start instructions are both simple operations to start a
loop whose iteration count (if any) is in LR. The loop-end
instruction handles "decrement iteration count and jump back to loop
start"; it also caches the information about the branch back to the
start of the loop to improve performance of the branch on subsequent
iterations.
As with the branch-future instructions, the architecture permits an
implementation to discard the LO_BRANCH_INFO cache at any time, and
QEMU takes the IMPDEF option to never set it in the first place
(equivalent to discarding it immediately), because for us a "real"
implementation would be unnecessary complexity.
(This implementation only provides the simple looping constructs; the
vector extension MVE (Helium) adds some extra variants to handle
looping across vectors. We'll add those later when we implement
MVE.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-8-peter.maydell@linaro.org
v8.1M implements a new 'branch future' feature, which is a
set of instructions that request the CPU to perform a branch
"in the future", when it reaches a particular execution address.
In hardware, the expected implementation is that the information
about the branch location and destination is cached and then
acted upon when execution reaches the specified address.
However the architecture permits an implementation to discard
this cached information at any point, and so guest code must
always include a normal branch insn at the branch point as
a fallback. In particular, an implementation is specifically
permitted to treat all BF insns as NOPs (which is equivalent
to discarding the cached information immediately).
For QEMU, implementing this caching of branch information
would be complicated and would not improve the speed of
execution at all, so we make the IMPDEF choice to implement
all BF insns as NOPs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-7-peter.maydell@linaro.org
The BLX immediate insn in the Thumb encoding always performs
a switch from Thumb to Arm state. This would be totally useless
in M-profile which has no Arm decoder, and so the instruction
does not exist at all there. Make the encoding UNDEF for M-profile.
(This part of the encoding space is used for the branch-future
and low-overhead-loop insns in v8.1M.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-6-peter.maydell@linaro.org
The t32 decode has a group which represents a set of insns
which overlap with B_cond_thumb because they have [25:23]=111
(which is an invalid condition code field for the branch insn).
This group is currently defined using the {} overlap-OK syntax,
but it is almost entirely non-overlapping patterns. Switch
it over to use a non-overlapping group.
For this to be valid syntactically, CPS must move into the same
overlapping-group as the hint insns (CPS vs hints was the
only actual use of the overlap facility for the group).
The non-overlapping subgroup for CLREX/DSB/DMB/ISB/SB is no longer
necessary and so we can remove it (promoting those insns to
be members of the parent group).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-5-peter.maydell@linaro.org
From v8.1M, disabled-coprocessor handling changes slightly:
* coprocessors 8, 9, 14 and 15 are also governed by the
cp10 enable bit, like cp11
* an extra range of instruction patterns is considered
to be inside the coprocessor space
We previously marked these up with TODO comments; implement the
correct behaviour.
Unfortunately there is no ID register field which indicates this
behaviour. We could in theory test an unrelated ID register which
indicates guaranteed-to-be-in-v8.1M behaviour like ID_ISAR0.CmpBranch
>= 3 (low-overhead-loops), but it seems better to simply define a new
ARM_FEATURE_V8_1M feature flag and use it for this and other
new-in-v8.1M behaviour that isn't identifiable from the ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-3-peter.maydell@linaro.org
Unlike many other bits in HCR_EL2, the description for this
bit does not contain the phrase "if ... this field behaves
as 0 for all purposes other than", so do not squash the bit
in arm_hcr_el2_eff.
Instead, replicate the E2H+TGE test in the two places that
require it.
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The reporting in AArch64.TagCheckFail only depends on PSTATE.EL,
and not the AccType of the operation. There are two guest
visible problems that affect LDTR and STTR because of this:
(1) Selecting TCF0 vs TCF1 to decide on reporting,
(2) Report "data abort same el" not "data abort lower el".
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have the full ARMMMUIdx as computed from the
function parameter.
For the purpose of regime_has_2_ranges, we can ignore any
difference between AccType_Normal and AccType_Unpriv, which
would be the only difference between the passed mmu_idx
and arm_mmu_idx_el.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When TBI is enabled in a given regime, 56 bits of the address
are significant and we need to clear out any other matching
virtual addresses with differing tags.
The other uses of tlb_flush_page (without mmuidx) in this file
are only used by aarch32 mode.
Fixes: 38d931687f
Reported-by: Jordan Frank <jordanfrank@fb.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016210754.818257-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For AArch32, unlike the VCVT of integer to float, which honours the
rounding mode specified by the FPSCR, VCVT of fixed-point to float is
always round-to-nearest. (AArch64 fixed-point-to-float conversions
always honour the FPCR rounding mode.)
Implement this by providing _round_to_nearest versions of the
relevant helpers which set the rounding mode temporarily when making
the call to the underlying softfloat function.
We only need to change the VFP VCVT instructions, because the
standard- FPSCR value used by the Neon VCVT is always set to
round-to-nearest, so we don't need to do the extra work of saving
and restoring the rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201013103532.13391-1-peter.maydell@linaro.org
The SMLAD instruction is supposed to:
* signed multiply Rn[15:0] * Rm[15:0]
* signed multiply Rn[31:16] * Rm[31:16]
* perform a signed addition of the products and Ra
* set Rd to the low 32 bits of the theoretical
infinite-precision result
* set the Q flag if the sign-extension of Rd
would differ from the infinite-precision result
(ie on overflow)
Our current implementation doesn't quite do this, though: it performs
an addition of the products setting Q on overflow, and then it adds
Ra, again possibly setting Q. This sometimes incorrectly sets Q when
the architecturally mandated only-check-for-overflow-once algorithm
does not. For instance:
r1 = 0x80008000; r2 = 0x80008000; r3 = 0xffffffff
smlad r0, r1, r2, r3
This is (-32768 * -32768) + (-32768 * -32768) - 1
The products are both 0x4000_0000, so when added together as 32-bit
signed numbers they overflow (and QEMU sets Q), but because the
addition of Ra == -1 brings the total back down to 0x7fff_ffff
there is no overflow for the complete operation and setting Q is
incorrect.
Fix this edge case by resorting to 64-bit arithmetic for the
case where we need to add three values together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201009144712.11187-1-peter.maydell@linaro.org
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we compile without KVM support !defined(CONFIG_KVM) we generate
stubs for functions that the linker will still encounter. Sometimes
these stubs can be executed safely and are placed in paths where they
get executed with or without KVM. Other functions should never be
called without KVM. Those functions should be guarded by kvm_enabled(),
but should also be robust to refactoring mistakes. Putting a
g_assert_not_reached() in the function should help. Additionally,
the g_assert_not_reached() calls may actually help the linker remove
some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't
necessary at all - the only caller is in kvm.c
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While converting to gen_gvec_ool_zzzp, we lost passing
a->esz as the data argument to the function.
Fixes: 36cbb7a8e7
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200918000500.2690937-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte update missed a bit when producing clean addresses.
Fixes: b2aa8879b8
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200916014102.2446323-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M-profile definition of the MVFR1 ID register differs slightly
from the A-profile one, and in particular the check for "does the CPU
support fp16 arithmetic" is not the same.
We don't currently implement any M-profile CPUs with fp16 arithmetic,
so this is not yet a visible bug, but correcting the logic now
disarms this beartrap for when we eventually do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-6-peter.maydell@linaro.org
Give the Cortex-M0 ID register values corresponding to its
implemented behaviour. These will not be guest-visible but will be
used to govern the behaviour of QEMU's emulation. We use the same
values that the Cortex-M3 does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
The ARM_FEATURE_PXN bit indicates whether the CPU supports the PXN
bit in short-descriptor translation table format descriptors. This
is indicated by ID_MMFR0.VMSA being at least 0b0100. Replace the
feature bit with an ID register check, in line with our preference
for ID register checks over feature bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-2-peter.maydell@linaro.org
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.
Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.
As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.
Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This check was backwards when introduced in commit
033614c47de78409ad3fb39bb7bd1483b71c6789:
target/arm: Filter cycle counter based on PMCCFILTR_EL0
Cc: qemu-stable@nongnu.org
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that 32-bit KVM host support is gone, KVM can never
be enabled unless CONFIG_AARCH64 is true, and some code
paths are no longer reachable and can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-3-peter.maydell@linaro.org
We deprecated the support for KVM on 32-bit Arm hosts in time
for release 5.0, which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note: the Linux
kernel dropped support for 32-bit Arm KVM hosts in 5.7.
Running 32-bit guests on a 64-bit Arm host remains supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
The VCMLA and VCADD insns have a size field which is 0 for fp16
and 1 for fp32 (note that this is the reverse of the Neon 3-same
encoding!). Convert it to MO_* values in decode for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats
to pass the size through to the trans function as a MO_* value
rather than the '0==f32, 1==f16' used in the fp 3-same encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
In the Neon instructions, some instruction formats have a 2-bit size
field which corresponds exactly to QEMU's MO_8/16/32/64. However the
floating-point insns in the 3-same group have a 1-bit size field
which is "0 for 32-bit float and 1 for 16-bit float". Currently we
pass these values directly through to trans_ functions, which means
that when reading a particular trans_ function you need to know if
that insn uses a 2-bit size or a 1-bit size.
Move the handling of the 1-bit size to the decodetree file, so that
all these insns consistently pass a size to the trans_ function which
is an MO_8/16/32/64 value.
In this commit we switch over the insns using the 3same_fp and
3same_fp_q0 formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This change is in a separate patch because it's not so obvious that it
won't cause a regression.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There's a typo in the type name of AARCH64_CPU_GET_CLASS. This
was never detected because the macro is not used by any code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Set the MVFR1 ID register FPHP and SIMDHP fields to indicate
that our "-cpu max" has v8.2-FP16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-46-peter.maydell@linaro.org
Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec,
and use this to implement fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-45-peter.maydell@linaro.org
In the gvec helper functions for indexed operations, for AArch32
Neon the oprsz (total size of the vector) can be less than 16 bytes
if the operation is on a D reg. Since the inner loop in these
helpers always goes from 0 to segment, we must clamp it based
on oprsz to avoid processing a full 16 byte segment when asked to
handle an 8 byte wide vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-43-peter.maydell@linaro.org
Convert the Neon VRINTX insn to use gvec, and use this to implement
fp16 support for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-42-peter.maydell@linaro.org
Convert the Neon VRINT-with-specified-rounding-mode insns to gvec,
and use this to implement the fp16 versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-41-peter.maydell@linaro.org
Convert the Neon VCVT with-specified-rounding-mode instructions
to gvec, and use this to implement fp16 support for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-40-peter.maydell@linaro.org
Implement fp16 for the Neon VCVT insns which convert between
float and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-39-peter.maydell@linaro.org
Convert the Neon VCVT float<->fixed-point insns to a
gvec style, in preparation for adding fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-38-peter.maydell@linaro.org
Convert the Neon float-integer VCVT insns to gvec, and use this
to implement fp16 support for them.
Note that unlike the VFP int<->fp16 VCVT insns we converted
earlier and which convert to/from a 32-bit integer, these
Neon insns convert to/from 16-bit integers. So we can use
the existing vfp conversion helpers for the f32<->u32/i32
case but need to provide our own for f16<->u16/i16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-37-peter.maydell@linaro.org
Convert the Neon pairwise fp ops to use a single gvic-style
helper to do the full operation instead of one helper call
for each 32-bit part. This allows us to use the same
framework to implement the fp16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-36-peter.maydell@linaro.org
Convert the Neon VRSQRTS insn to using a gvec helper,
and use this to implement the fp16 case.
As with VRECPS, we adjust the phrasing of the new implementation
slightly so that the fp32 version parallels the fp16 one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-35-peter.maydell@linaro.org
Convert the Neon VRECPS insn to using a gvec helper, and
use this to implement the fp16 case.
The phrasing of the new float32_recps_nf() is slightly different from
the old recps_f32() so that it parallels the f16 version; for f16 we
can't assume that flush-to-zero is always enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-34-peter.maydell@linaro.org
Convert the neon floating-point vector compare-vs-0 insns VCEQ0,
VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-33-peter.maydell@linaro.org
Convert the neon floating-point vector operations VFMA and VFMS
to use a gvec helper, and use this to implement the fp16 case.
This is the last use of do_3same_fp() so we can now delete
that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-32-peter.maydell@linaro.org
Convert the Neon floating-point VMLA and VMLS insns over to using a
gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-31-peter.maydell@linaro.org
Convert the Neon floating point VMAXNM and VMINNM insns to
using a gvec helper and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-30-peter.maydell@linaro.org
Convert the Neon float-point VMAX and VMIN insns over to using
a gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-29-peter.maydell@linaro.org
Convert the neon floating-point vector absolute comparison ops
VACGE and VACGT over to using a gvec hepler and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-28-peter.maydell@linaro.org
Convert the Neon floating-point vector comparison ops VCEQ,
VCGE and VCGT over to using a gvec helper and use this to
implement the fp16 case.
(We put the float16_ceq() etc functions above the DO_2OP()
macro definition because later when we convert the
compare-against-zero instructions we'll want their
definitions to be visible at that point in the source file.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-27-peter.maydell@linaro.org
Rewrite Neon VABS/VNEG of floats to use gvec logical AND and XOR, so
that we can implement the fp16 version of the insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-26-peter.maydell@linaro.org
We already have gvec helpers for floating point VRECPE and
VRQSRTE, so convert the Neon decoder to use them and
add the fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-25-peter.maydell@linaro.org
Implement FP16 support for the Neon insns which use the DO_3S_FP_GVEC
macro: VADD, VSUB, VABD, VMUL.
For VABD this requires us to implement a new gvec_fabd_h helper
using the machinery we have already for the other helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-24-peter.maydell@linaro.org
Implement the VFP fp16 variant of VMOV that transfers a 16-bit
value between a general purpose register and a VFP register.
Note that Rt == 15 is UNPREDICTABLE; since this insn is v8 and later
only we have no need to replicate the old "updates CPSR.NZCV"
behaviour that the singleprec version of this insn does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-22-peter.maydell@linaro.org
The fp16 extension includes a new instruction VMOVX, which copies the
upper 16 bits of a 32-bit source VFP register into the lower 16
bits of the destination and zeroes the high half of the destination.
Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-21-peter.maydell@linaro.org
The fp16 extension includes a new instruction VINS, which copies the
lower 16 bits of a 32-bit source VFP register into the upper 16 bits
of the destination. Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-20-peter.maydell@linaro.org
Implement the fp16 version of the VFP VRINT* insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-19-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VSEL instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-18-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms
which convert between floating point and integer with a specified
rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-17-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-16-peter.maydell@linaro.org
Now the VFP_CONV_FIX macros can handle fp16's distinction between the
width of the operation and the width of the type used to pass operands,
use the macros rather than the open-coded functions.
This creates an extra six helper functions, all of which we are going
to need for the AArch32 VFP fp16 instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-15-peter.maydell@linaro.org
Currently the VFP_CONV_FIX macros take a single fsz argument for the
size of the float type, which is used both to select the name of
the functions to call (eg float32_is_any_nan()) and also for the
type to use for the float inputs and outputs (eg float32).
Separate these into fsz and ftype arguments, so that we can use them
for fp16, which uses 'float16' in the function names but is still
passing inputs and outputs in a 32-bit sized type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-14-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-13-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VLDR/VSTR (immediate).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-12-peter.maydell@linaro.org
Implement fp16 version of VCMP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-11-peter.maydell@linaro.org
Implement VFP fp16 support for the VMOV immediate insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-10-peter.maydell@linaro.org
Implement VFP fp16 for VABS, VNEG and VSQRT. This is all
the fp16 insns that use the DO_VFP_2OP macro, because there
is no fp16 version of VMOV_reg.
Notes:
* the gen_helper_vfp_negh already exists as we needed to create
it for the fp16 multiply-add insns
* as usual we need to use the f16 version of the fp_status;
this is only relevant for VSQRT
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-9-peter.maydell@linaro.org
Macroify the uses of do_vfp_2op_sp() and do_vfp_2op_dp(); this will
make it easier to add the halfprec support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-8-peter.maydell@linaro.org
Macroify creation of the trans functions for single and double
precision VFMA, VFMS, VFNMA, VFNMS. The repetition was OK for
two sizes, but we're about to add halfprec and it will get a bit
more than seems reasonable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-6-peter.maydell@linaro.org
Implement fp16 versions of the VFP VMLA, VMLS, VNMLS, VNMLA, VNMUL
instructions. (These are all the remaining ones which we implement
via do_vfp_3op_[hsd]p().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-5-peter.maydell@linaro.org
Implmeent VFP fp16 support for simple binary-operator VFP insns VADD,
VSUB, VMUL, VDIV, VMINNM and VMAXNM:
* make the VFP_BINOP() macro generate float16 helpers as well as
float32 and float64
* implement a do_vfp_3op_hp() function similar to the existing
do_vfp_3op_sp()
* add decode for the half-precision insn patterns
Note that the VFP_BINOP macro use creates a couple of unused helper
functions vfp_maxh and vfp_minh, but they're small so it's not worth
splitting the BINOP operations into "needs halfprec" and "no
halfprec" groups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-4-peter.maydell@linaro.org
The aa32_fp16_arith feature check function currently looks at the
AArch64 ID_AA64PFR0 register. This is (as the comment notes) not
correct. The bogus check was put in mostly to allow testing of the
fp16 variants of the VCMLA instructions and it was something of
a mistake that we allowed them to exist in master.
Switch the feature check function to testing VMFR1.FPHP, which is
what it ought to be.
This will remove emulation of the VCMLA and VCADD insns from
AArch32 code running on an AArch64 '-cpu max' using system emulation.
(They were never enabled for aarch32 linux-user and system-emulation.)
Since we weren't advertising their existence via the AArch32 ID
register, well-behaved guests wouldn't have been using them anyway.
Once we have implemented all the AArch32 support for the FP16 extension
we will advertise it in the MVFR1 ID register field, which will reenable
these insns along with all the others.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-3-peter.maydell@linaro.org
In several places the target/arm code defines local float constants
for 2, 3 and 1.5, which are also provided by include/fpu/softfloat.h.
Remove the unnecessary local duplicate versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-2-peter.maydell@linaro.org
Clang static code analyzer show warning:
target/arm/translate-a64.c:8635:14: warning: Value stored to 'tcg_rn' during its
initialization is never read
TCGv_i64 tcg_rn = new_tmp_a64(s);
^~~~~~ ~~~~~~~~~~~~~~
target/arm/translate-a64.c:8636:14: warning: Value stored to 'tcg_rd' during its
initialization is never read
TCGv_i64 tcg_rd = new_tmp_a64(s);
^~~~~~ ~~~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-4-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify add/sub helpers and add a parameter for rounding.
This will allow saturating non-rounding to reuse this code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: fixed accidental use of '=' rather than '+=' in do_sqrdmlah_s]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than require the user to fill in the immediate (shl or shr),
create full formats that include the immediate.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model after gen_gvec_fn_zzz et al.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing clr functions have only one vector argument, and so
can only clear in place. The existing movz functions have two
vector arguments, and so can clear while moving. Merge them, with
a flag that controls the sense of active vs inactive elements
being cleared.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model after gen_gvec_fn_zzz et al.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec operation was added after the initial implementation
of the SEL instruction and was missed in the conversion.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the check for !S into do_pppp_flags, which allows to merge in
do_vecop4_p. Split out gen_gvec_fn_ppp without sve_access_check,
to mirror gen_gvec_fn_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only user of the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to ensure that access is checked by the time we ask
for a specific fp/vector register. We want to ensure that
we do not emit two lots of code to raise an exception.
But sometimes it's difficult to cleanly organize the code
such that we never pass through sve_check_access exactly once.
Allow multiple calls so long as the result is true, that is,
no exception to be raised.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model gen_gvec_fn_zzz on gen_gvec_fn3 in translate-a64.c, but
indicating which kind of register and in which order.
Model do_zzz_fn on the other do_foo functions that take an
argument set and verify sve enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model the new function on gen_gvec_fn2 in translate-a64.c, but
indicating which kind of register and in which order. Since there
is only one user of do_vector2_z, fold it into do_mov_z.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to AArch64.TagCheckFault, none of the other ISS values are
provided, so we do not need to go so far as merge_syn_data_abort.
But we were missing the WnR bit.
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need more information than just the mmu_idx in order
to create the proper exception syndrome. Only change the
function signature so far.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit ce4afed839 ("target/arm: Implement AArch32 HCR and HCR2")
the HCR_EL2 register has been changed from type NO_RAW (no underlying
state and does not support raw access for state saving/loading) to
type CONST (TCG can assume the value to be constant), removing the
read/write accessors.
We forgot to remove the previous type ARM_CP_NO_RAW. This is not
really a problem since the field is overwritten. However it makes
code review confuse, so remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200812111223.7787-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the VCMLA and VCADD insns we put in the
code to handle fp16, but left it using the standard fp status
flags. Correct them to use FPST_STD_F16 for fp16 operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-5-peter.maydell@linaro.org
Architecturally, Neon FP16 operations use the "standard FPSCR" like
all other Neon operations. However, this is defined in the Arm ARM
pseudocode as "a fixed value, except that FZ16 (and AHP) follow the
FPSCR bits". In QEMU, the softfloat float_status doesn't include
separate flush-to-zero for FP16 operations, so we must keep separate
fp_status for "Neon non-FP16" and "Neon fp16" operations, in the
same way we do already for the non-Neon "fp_status" vs "fp_status_f16".
Add the extra float_status field to the CPU state structure,
ensure it is correctly initialized and updated on FPSCR writes,
and make fpstatus_ptr(FPST_STD_F16) return a pointer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-4-peter.maydell@linaro.org
Make A32/T32 code use the new fpstatus_ptr() API:
get_fpstatus_ptr(0) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(1) -> fpstatus_ptr(FPST_STD)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-3-peter.maydell@linaro.org
We currently have two versions of get_fpstatus_ptr(), which both take
an effectively boolean argument:
* the one for A64 takes "bool is_f16" to distinguish fp16 from other ops
* the one for A32/T32 takes "int neon" to distinguish Neon from other ops
This is confusing, and to implement ARMv8.2-FP16 the A32/T32 one will
need to make a four-way distinction between "non-Neon, FP16",
"non-Neon, single/double", "Neon, FP16" and "Neon, single/double".
The A64 version will then be a strict subset of the A32/T32 version.
To clean this all up, we want to go to a single implementation which
takes an enum argument with values FPST_FPCR, FPST_STD,
FPST_FPCR_F16, and FPST_STD_F16. We rename the function to
fpstatus_ptr() so that unconverted code gets a compilation error
rather than silently passing the wrong thing to the new function.
This commit implements that new API, and converts A64 to use it:
get_fpstatus_ptr(false) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(true) -> fpstatus_ptr(FPST_FPCR_F16)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-2-peter.maydell@linaro.org
In commit 962fcbf2ef we converted the uses of the
ARM_FEATURE_CRC bit to use the aa32_crc32 isar_feature test
instead. However we forgot to remove the now-unused definition
of the feature name in the enum. Delete it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200805210848.6688-1-peter.maydell@linaro.org
In arm_tr_init_disas_context() we have a FIXME comment that suggests
"cpu_M0 can probably be the same as cpu_V0". This isn't in fact
possible: cpu_V0 is used as a temporary inside gen_iwmmxt_shift(),
and that function is called in various places where cpu_M0 contains a
live value (i.e. between gen_op_iwmmxt_movq_M0_wRn() and
gen_op_iwmmxt_movq_wRn_M0() calls). Remove the comment.
We also have a comment on the declarations of cpu_V0/V1/M0 which
claims they're "for efficiency". This isn't true with modern TCG, so
replace this comment with one which notes that they're only used with
the iwmmxt decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803132815.3861-1-peter.maydell@linaro.org
As part of the Neon decodetree conversion we removed all
the uses of the VFP_DREG macros, but forgot to remove the
macro definitions. Do so now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200803124848.18295-1-peter.maydell@linaro.org
The ARCH() macro was used a lot in the legacy decoder, but
there are now just two uses of it left. Since a macro which
expands out to a goto is liable to be confusing when reading
code, replace the last two uses with a simple open-coded
qeuivalent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-8-peter.maydell@linaro.org
Convert the T32 coprocessor instructions to decodetree.
As with the A32 conversion, this corrects an underdecoding
where we did not check that MRRC/MCRR [24:21] were 0b0010
and so treated some kinds of LDC/STC and MRRC/MCRR rather
than UNDEFing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-7-peter.maydell@linaro.org
For M-profile CPUs, the architecture specifies that the NOCP
exception when a coprocessor is not present or disabled should cover
the entire wide range of coprocessor-space encodings, and should take
precedence over UNDEF exceptions. (This is the opposite of
A-profile, where checking for a disabled FPU has to happen last.)
Implement this with decodetree patterns that cover the specified
ranges of the encoding space. There are a few instructions (VLLDM,
VLSTM, and in v8.1 also VSCCLRM) which are in copro-space but must
not be NOCP'd: these must be handled also in the new m-nocp.decode so
they take precedence.
This is a minor behaviour change: for unallocated insn patterns in
the VFP area (cp=10,11) we will now NOCP rather than UNDEF when the
FPU is disabled.
As well as giving us the correct architectural behaviour for v8.1M
and the recommended behaviour for v8.0M, this refactoring also
removes the old NOCP handling from the remains of the 'legacy
decoder' in disas_thumb2_insn(), paving the way for cleaning that up.
Since we don't currently have a v8.1M feature bit or any v8.1M CPUs,
the minor changes to this logic that we'll need for v8.1M are marked
up with TODO comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-6-peter.maydell@linaro.org
The only thing left in the "legacy decoder" is the handling
of disas_xscale_insn(), and we can simplify the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-5-peter.maydell@linaro.org
Convert the A32 coprocessor instructions to decodetree.
Note that this corrects an underdecoding: for the 64-bit access case
(MRRC/MCRR) we did not check that bits [24:21] were 0b0010, so we
would incorrectly treat LDC/STC as MRRC/MCRR rather than UNDEFing
them.
The decodetree versions of these insns assume the coprocessor
is in the range 0..7 or 14..15. This is architecturally sensible
(as per the comments) and OK in practice for QEMU because the only
uses of the ARMCPRegInfo infrastructure we have that aren't
for coprocessors 14 or 15 are the pxa2xx use of coprocessor 6.
We add an assertion to the define_one_arm_cp_reg_with_opaque()
function to catch any accidental future attempts to use it to
define coprocessor registers for invalid coprocessors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-4-peter.maydell@linaro.org
As a prelude to making coproc insns use decodetree, split out the
part of disas_coproc_insn() which does instruction decoding from the
part which does the actual work, and make do_coproc_insn() handle the
UNDEF-on-bad-permissions and similar cases itself rather than
returning 1 to eventually percolate up to a callsite that calls
unallocated_encoding() for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-3-peter.maydell@linaro.org
At the moment we check for XScale/iwMMXt insns inside
disas_coproc_insn(): for CPUs with ARM_FEATURE_XSCALE all copro insns
with cp 0 or 1 are handled specially. This works, but is an odd
place for this check, because disas_coproc_insn() is called from both
the Arm and Thumb decoders but the XScale case never applies for
Thumb (all the XScale CPUs were ARMv5, which has only Thumb1, not
Thumb2 with the 32-bit coprocessor insn encodings). It also makes it
awkward to convert the real copro access insns to decodetree.
Move the identification of XScale out to its own function
which is only called from disas_arm_insn().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-2-peter.maydell@linaro.org
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a coprocessor instruction in an AArch32 guest traps to AArch32
Hyp mode, the syndrome register (HSR) includes Rt and Rt2 fields
which are simply copies of the Rt and Rt2 fields from the trapped
instruction. However, if the instruction is trapped from AArch32 to
an AArch64 higher exception level, the Rt and Rt2 fields in the
syndrome register (ESR_ELx) must be the AArch64 view of the register.
This makes a difference if the AArch32 guest was in a mode other than
User or System and it was using r13 or r14, or if it was in FIQ mode
and using r8-r14.
We don't know at translate time which AArch32 CPU mode we are in, so
we leave the values we generate in our prototype syndrome register
value at translate time as the raw Rt/Rt2 from the instruction, and
instead correct them to the AArch64 view when we find we need to take
an exception from AArch32 to AArch64 with one of these syndrome
values.
Fixes: https://bugs.launchpad.net/qemu/+bug/1879587
Reported-by: Julien Freche <julien@bedrocksystems.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200804193903.31240-1-peter.maydell@linaro.org
These instructions use zero as the discriminator, not SP.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Message-id: 20200804002849.30268-1-pcc@google.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC version 4.9.4 isn't clever enough to figure out that all
execution paths in disas_ldst() that use 'fn' will have initialized
it first, and so it warns:
/home/LiKaige/qemu/target/arm/translate-a64.c: In function ‘disas_ldst’:
/home/LiKaige/qemu/target/arm/translate-a64.c:3392:5: error: ‘fn’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
fn(cpu_reg(s, rt), clean_addr, tcg_rs, get_mem_index(s),
^
/home/LiKaige/qemu/target/arm/translate-a64.c:3318:22: note: ‘fn’ was declared here
AtomicThreeOpFn *fn;
^
Make it happy by initializing the variable to NULL.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Message-id: 1596110248-7366-2-git-send-email-likaige@loongson.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Clean up commit message and note which gcc version this was]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.
Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.
For now, prefer the minimal fix to the error indication alone.
Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When GCR_EL1.RRND==1, the choosing of the random value is IMPDEF,
and the kernel is not expected to have set RGSR_EL1. Force a
non-zero value into SEED, so that we do not continually return
the same tag.
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200724163853.504655-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we changed the interface of get_phys_addr_lpae to require
the cacheattr parameter, this spot was missed. The compiler is
unable to detect the use of NULL vs the nonnull attribute here.
Fixes: 7e98e21c09
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Jan Kiszka <jan.kiskza@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.
Default MTE to off, since this feature implies extra overhead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Raw writes to this register when in KVM mode can cause interrupts to be
raised (even when the PMU is disabled). Because the underlying state is
already aliased to PMINTENSET (which already provides raw write
functions), we can safely disable raw accesses to PMINTENCLR entirely.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-id: 20200707152616.1917154-1-aaron@os.amperecomputing.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mtedesc that was constructed was not actually passed in.
Found by Coverity (CID 1429996).
Fixes: d28d12f008
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200706202345.193676-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
The temp that gets assigned to clean_addr has been allocated with
new_tmp_a64, which means that it will be freed at the end of the
instruction. Freeing it earlier leads to assertion failure.
The loop creates a complication, in which we allocate a new local
temp, which does need freeing, and the final code path is shared
between the loop and non-loop.
Fix this complication by adding new_tmp_a64_local so that the new
local temp is freed at the end, and can be treated exactly like
the non-loop path.
Fixes: bba87d0a0f
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200702175605.1987125-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Injecting external data abort through KVM might trigger
an issue on kernels that do not get updated to include the KVM fix.
For those and aarch32 guests, the injected abort gets misconfigured
to be an implementation defined exception. This leads to the guest
repeatedly re-running the faulting instruction.
Add support for handling that case.
[
Fixed-by: 018f22f95e8a
('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests')
Fixed-by: 21aecdbd7f3a
('KVM: arm: Make inject_abt32() inject an external abort instead')
]
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Acked-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200629114110.30723-3-beata.michalska@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARMv7 & ARMv8 some load/store instructions might trigger a data abort
exception with no valid ISS info to be decoded. The lack of decode info
makes it at least tricky to emulate those instruction which is one of the
(many) reasons why KVM will not even try to do so.
Add support for handling those by requesting KVM to inject external
dabt into the quest.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200629114110.30723-2-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now implement all of the components of MTE, without actually
supporting any tagged memory. All MTE instructions will work,
trivially, so we can enable support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Look up the physical address for the given virtual address,
convert that to a tag physical address, and finally return
the host address that backs it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-45-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200626033144.790098-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This "bit" is a particular value of the page's MemAttr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check the memattr of a page in order to determine
whether it is Tagged for MTE. Between Stage1 and Stage2,
this becomes simpler if we always collect this data, instead
of occasionally being presented with NULL.
Use the nonnull attribute to allow the compiler to check that
all pointer arguments are non-null.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
D1.10 specifies that exception handlers begin with tag checks overridden.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is DC GVA and DC GZVA, and the tag check for DC ZVA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a number of paths by which the TBI is still intact
for user-only in the SVE helpers.
Because we currently always set TBI for user-only, we do not
need to pass down the actual TBI setting from above, and we
can remove the top byte in the inner-most primitives, so that
none are forgotten. Moreover, this keeps the "dirty" pointer
around at the higher levels, where we need it for any MTE checking.
Since the normal case, especially for user-only, goes through
RAM, this clearing merely adds two insns per page lookup, which
will be completely in the noise.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the elements are non-sequential, we cannot eliminate many
tests straight away like we can for sequential operations. But
we often have the PTE details handy, so we can test for Tagged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We still need to handle tbi for user-only when mte is inactive.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce an lvalue macro to wrap target_tlb_bit0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the variable declarations to the top of the function,
but do not create a new label before sve_access_check.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a special helper for DC_ZVA, rather than the more
general mte_checkN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fill out the stub that was added earlier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fill out the stub that was added earlier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace existing uses of check_data_tbi in translate-a64.c that
perform multiple logical memory access. Leave the helper blank
for now to reduce the patch size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace existing uses of check_data_tbi in translate-a64.c that
perform a single logical memory access. Leave the helper blank
for now to reduce the patch size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly need this in mte_helper.c as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly need this in mte_helper.c as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Like the regular data cache flushes, these are nops within qemu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we know that the operation is on a single page,
we need not loop over pages while probing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can simplify our DC_ZVA if we recognize that the largest BS
that we actually use in system mode is 64. Let us just assert
that it fits within TARGET_PAGE_SIZE.
For DC_GVA and STZGM, we want to be able to write whole bytes
of tag memory, so assert that BS is >= 2 * TAG_GRANULE, or 32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the same code as system mode, so that we generate the same
exception + syndrome for the unaligned access.
For the moment, if MTE is enabled so that this path is reachable,
this would generate a SIGSEGV in the user-only cpu_loop. Decoding
the syndrome to produce the proper SIGBUS will be done later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current Arm ARM has adjusted the official decode of
"Add/subtract (immediate)" so that the shift field is only bit 22,
and bit 23 is part of the op1 field of the parent category
"Data processing - immediate".
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-11-richard.henderson@linaro.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cache the composite ATA setting.
Cache when MTE is fully enabled, i.e. access to tags are enabled
and tag checks affect the PE. Do this for both the normal context
and the UNPRIV context.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3,
RGSR_EL1, GCR_EL1, GMID_EL1, and PSTATE.TCO.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an option that writes back the PC, like DISAS_UPDATE_EXIT,
but does not exit back to the main loop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Emphasize that the is_jmp option exits to the main loop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This does not attempt to rectify all of the res0 bits, but does
clear the mte bits when not enabled. Since there is no high-part
mapping of SCTLR, aa32 mode cannot write to these bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Protect reads of aa64 id registers with ARM_CP_STATE_AA64.
Use this as a simpler test than arm_el_is_aa64, since EL3
cannot change mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit d70c996df2, when enabling the PMU we get:
$ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3
Segmentation fault (core dumped)
Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault.
0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
2588 ret = ioctl(s->fd, type, arg);
(gdb) bt
#0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
#1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916
#2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213
#3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111
#4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170
#5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328
#6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561
#7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407
#8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218
#9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050
...
#15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512
#16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687
#17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702
#18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770
#19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138
#20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348
#21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48
This is because in frame #2, cpu->kvm_state is still NULL
(the vCPU is not yet realized).
KVM has a hard requirement of all cores supporting the same
feature set. We only need to check if the accelerator supports
a feature, not each vCPU individually.
Fix by removing the 'CPUState *cpu' argument from the
kvm_arm_<FEATURE>_supported() functions.
Fixes: d70c996df2 ('Use CPUState::kvm_state in kvm_arm_pmu_supported')
Reported-by: Haibo Xu <haibo.xu@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit cfdb2c0c95 ("target/arm: Vectorize SABA/UABA") we
replaced the old handling of SABA/UABA with a vectorized implementation
which returns early rather than falling into the loop-ever-elements
code. We forgot to delete the part of the old looping code that
did the accumulate step, and Coverity correctly warns (CID 1428955)
that this code is now dead. Delete it.
Fixes: cfdb2c0c95
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200619171547.29780-1-peter.maydell@linaro.org
Since commit ba3e792669 it has been unnecessary for target code
to call gen_io_end() after an IO instruction in icount mode; it is
sufficient to call gen_io_start() before it and to force the end of
the TB.
Many now-unnecessary calls to gen_io_end() were removed in commit
9e9b10c649, but some were missed or accidentally added later.
Remove unneeded calls from the arm target:
* the call in the handling of exception-return-via-LDM is
unnecessary, and the code is already forcing end-of-TB
* the call in the VFP access check code is more complicated:
we weren't ending the TB, so we need to add the code to
force that by setting DISAS_UPDATE
* the doc comment for ARM_CP_IO doesn't need to mention
gen_io_end() any more
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-id: 20200619170324.12093-1-peter.maydell@linaro.org
The functions neon_element_offset(), neon_load_element(),
neon_load_element64(), neon_store_element() and
neon_store_element64() are used only in the translate-neon.inc.c
file, so move their definitions there.
Since the .inc.c file is #included in translate.c this doesn't make
much difference currently, but it's a more logical place to put the
functions and it might be helpful if we ever decide to try to make
the .inc.c files genuinely separate compilation units.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-22-peter.maydell@linaro.org
Convert the Neon VTRN insn to decodetree. This is the last insn in the
Neon data-processing group, so we can remove all the now-unused old
decoder framework.
It's possible that there's a more efficient implementation of
VTRN, but for this conversion we just copy the existing approach.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-21-peter.maydell@linaro.org
Convert the Neon VSWP insn to decodetree. Since the new implementation
doesn't have to share a pass-loop with the other 2-reg-misc operations
we can implement the swap with 64-bit accesses rather than 32-bits
(which brings us into line with the pseudocode and is more efficient).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-20-peter.maydell@linaro.org
Convert the VCVT instructions in the 2-reg-misc grouping to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-19-peter.maydell@linaro.org
Convert the Neon 2-reg-misc VRINT insns to decodetree.
Giving these insns their own do_vrint() function allows us
to change the rounding mode just once at the start and end
rather than doing it for every element in the vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-18-peter.maydell@linaro.org
Convert the fp-compare-with-zero insns in the Neon 2-reg-misc group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-17-peter.maydell@linaro.org
Convert the Neon 2-reg-misc insns which are implemented with
simple calls to functions that take the input, output and
fpstatus pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-16-peter.maydell@linaro.org
Convert the Neon VQABS and VQNEG insns to decodetree.
Since these are the only ones which need cpu_env passing to
the helper, we wrap the helper rather than creating a whole
new do_2misc_env() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-15-peter.maydell@linaro.org
Convert the remaining ops in the Neon 2-reg-misc group which
can be implemented simply with our do_2misc() helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-14-peter.maydell@linaro.org
Convert the VREV32 and VREV16 insns in the Neon 2-reg-misc group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-13-peter.maydell@linaro.org
Make gen_swap_half() take a source and destination TCGv_i32 rather
than modifying the input TCGv_i32; we're going to want to be able to
use it with the more flexible function signature, and this also
brings it into line with other functions like gen_rev16() and
gen_revsh().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-12-peter.maydell@linaro.org
All the other typedefs like these spell "Op" with a lowercase 'p';
remane the NeonGenTwoSingleOPFn and NeonGenTwoDoubleOPFn typedefs to
match.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-11-peter.maydell@linaro.org
The NeonGenOneOpFn typedef breaks with the pattern of the other
NeonGen*Fn typedefs, because it is a TCGv_i64 -> TCGv_i64 operation
but it does not have '64' in its name. Rename it to NeonGenOne64OpFn,
so that the old name is available for a TCGv_i32 -> TCGv_i32 operation
(which we will need in a subsequent commit).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-10-peter.maydell@linaro.org
Convert to decodetree the insns in the Neon 2-reg-misc grouping which
we implement using gvec.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-8-peter.maydell@linaro.org
Convert the Neon insns in the 2-reg-misc group which are
VCVT between f32 and f16 to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-7-peter.maydell@linaro.org
Convert the VSHLL insn in the 2-reg-misc Neon group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-6-peter.maydell@linaro.org
Convert the Neon narrowing moves VMQNV, VQMOVN, VQMOVUN in the 2-reg-misc
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-5-peter.maydell@linaro.org
Convert the Neon VZIP and VUZP insns in the 2-reg-misc group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-4-peter.maydell@linaro.org
Convert the pairwise ops VPADDL and VPADAL in the 2-reg-misc grouping
to decodetree.
At this point we can get rid of the weird CPU_V001 #define that was
used to avoid having to explicitly list all the arguments being
passed to some TCG gen/helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-3-peter.maydell@linaro.org
Convert the Neon VREV64 insn from the 2-reg-misc grouping to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200616170844.13318-2-peter.maydell@linaro.org
Virtual time adjustment was implemented for virt-5.0 machine type,
but the cpu property was enabled only for host-passthrough and max
cpu model. Let's add it for any KVM arm cpu which has the generic
timer feature enabled.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200608121243.2076-1-fangying1@huawei.com
[PMM: minor commit message tweak, removed inaccurate
suggested-by tag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the Neon VDUP (scalar) insn to decodetree. (Note that we
can't call this just "VDUP" as we used that already in vfp.decode for
the "VDUP (general purpose register" insn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon VTBL, VTBX instructions to decodetree. The actual
implementation of the insn is copied across to the new trans function
unchanged except for renaming 'tmp5' to 'tmp4'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon VEXT insn to decodetree. Rather than keeping the
old implementation which used fixed temporaries cpu_V0 and cpu_V1
and did the extraction with by-hand shift and logic ops, we use
the TCG extract2 insn.
We don't need to special case 0 or 8 immediates any more as the
optimizer is smart enough to throw away the dead code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 2-reg-scalar long multiplies to decodetree.
These are the last instructions in the group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VQRDMLAH and VQRDMLSH insns in the 2-reg-scalar
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VQDMULH and VQRDMULH insns in the 2-reg-scalar group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float versions of VMLA, VMLS and VMUL in the Neon
2-reg-scalar group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
As noted in the comment on the WRAP_FP_FN macro, we could have
had a do_2scalar_fp() function, but for 3 insns it seemed
simpler to just do the wrapping to get hold of the fpstatus ptr.
(These are the only fp insns in the group.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMLA, VMLS and VMUL insns in the Neon "2 registers and a
scalar" group to decodetree. These are 32x32->32 operations where
one of the inputs is the scalar, followed by a possible accumulate
operation of the 32-bit result.
The refactoring removes some of the oddities of the old decoder:
* operands to the operation and accumulation were often
reversed (taking advantage of the fact that most of these ops
are commutative); the new code follows the pseudocode order
* the Q bit in the insn was in a local variable 'u'; in the
new code it is decoded into a->q
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit 37bfce81b1 we accidentally introduced a leak of a TCG
temporary in do_2shift_env_64(); free it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mark the arrays of function pointers in trans_VSHLL_S_2sh() and
trans_VSHLL_U_2sh() as both 'static' and 'const'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insn polynomial VMULL. This is the last
insn in this group to be converted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VQDMULL, VQDMLAL and VQDMLSL:
these are all saturating doubling long multiplies with a possible
accumulate step.
These are the last insns in the group which use the pass-over-each
elements loop, so we can delete that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VMULL, VMLAL and VMLSL; these perform
a 32x32->64 multiply with possible accumulate.
Note that for VMLSL we do the accumulate directly with a subtraction
rather than doing a negate-then-add as the old code did.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VABAL and VABDL to decodetree.
Like almost all the remaining insns in this group, these are
a combination of a two-input operation which returns a double width
result and then a possible accumulation of that double width
result into the destination.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the narrow-to-high-half insns VADDHN, VSUBHN, VRADDHN,
VRSUBHN in the Neon 3-registers-different-lengths group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "pre-widening" insns VADDL, VSUBL, VADDW and VSUBW
in the Neon 3-registers-different-lengths group to decodetree.
These insns work by widening one or both inputs to double their
size, performing an add or subtract at the doubled size and
then storing the double-size result.
As usual, rather than copying the loop of the original decoder
(which needs awkward code to avoid problems when source and
destination registers overlap) we just unroll the two passes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The widenfn() in do_vshll_2sh() does not free the input 32-bit
TCGv, so we need to do this in the calling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The miscellaneous control instructions are mutually exclusive
within the t32 decode sub-group.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the insns in the one-register-and-immediate group to decodetree.
In the new decode, our asimd_imm_const() function returns a 64-bit value
rather than a 32-bit one, which means we don't need to treat cmode=14 op=1
as a special case in the decoder (it is the only encoding where the two
halves of the 64-bit value are different).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-10-peter.maydell@linaro.org
Convert the VCVT fixed-point conversion operations in the
Neon 2-regs-and-shift group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-9-peter.maydell@linaro.org
Convert the VSHLL and VMOVL insns from the 2-reg-shift group
to decodetree. Since the loop always has two passes, we unroll
it to avoid the awkward reassignment of one TCGv to another.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-8-peter.maydell@linaro.org
Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree.
These are the last of the simple shift-by-immediate insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-5-peter.maydell@linaro.org
Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree.
(These are the last instructions in the group that are vectorized;
the rest all require looping over each element.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-4-peter.maydell@linaro.org
Convert the VSHR 2-reg-shift insns to decodetree.
Note that unlike the legacy decoder, we present the right shift
amount to the trans_ function as a positive integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-3-peter.maydell@linaro.org
Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-2-peter.maydell@linaro.org
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
Do not explicitly store zero to the NEON high part
when we can pass !is_q to clear_vec_high.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 8-byte store for the end a !is_q operation can be
merged with the other stores. Use a no-op vector move
to trigger the expand_clr portion of tcg_gen_gvec_mov.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GEN_NEON_INTEGER_OP macro is no longer used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have had this on the to-do list for quite some time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
Convert the Neon floating point VFMA and VFMS insn to decodetree.
These are the last insns in the 3-reg-same group so we can
remove all the support/loop code from the old decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-18-peter.maydell@linaro.org
Convert the Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS 3-reg-same
insns to decodetree. (These are all the remaining non-accumulation
instructions in this group.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-17-peter.maydell@linaro.org
The usual location for the env argument in the argument list of a TCG helper
is immediately after the return-value argument. recps_f32 and rsqrts_f32
differ in that they put it at the end.
Move the env argument to its usual place; this will allow us to
more easily use these helper functions with the gvec APIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-16-peter.maydell@linaro.org
Convert the Neon integer 3-reg-same compare insns VCGE, VCGT,
VCEQ, VACGE and VACGT to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-15-peter.maydell@linaro.org
Convert the Neon integer VMUL, VMLA, and VMLS 3-reg-same inssn to
decodetree.
We don't have a gvec helper for multiply-accumulate, so VMLA and VMLS
need a loop function do_3same_fp(). This takes a reads_vd parameter
to do_3same_fp() which tells it to load the old value into vd before
calling the callback function, in the same way that the do_vfp_3op_sp()
and do_vfp_3op_dp() functions in translate-vfp.inc.c work. (The
only uses in this patch pass reads_vd == true, but later commits
will use reads_vd == false.)
This conversion fixes in passing an underdecoding for VMUL
(originally reported by Fredrik Strupe <fredrik@strupe.net>): bit 1
of the 'size' field must be 0. The old decoder didn't enforce this,
but the decodetree pattern does.
The gen_VMLA_fp_reg() function performs the addition operation
with the operands in the opposite order to the old decoder:
since Neon sets 'default NaN mode' float32_add operations are
commutative so there is no behaviour difference, but putting
them this way around matches the Arm ARM pseudocode and the
required operation order for the subtraction in gen_VMLS_fp_reg().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-14-peter.maydell@linaro.org
Convert the Neon float VPMIN, VPMAX and VPADD 3-reg-same insns to
decodetree. These are the only remaining 'pairwise' operations,
so we can delete the pairwise-specific bits of the old decoder's
for-each-element loop now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-13-peter.maydell@linaro.org
Convert the Neon VADD, VSUB, VABD 3-reg-same insns to decodetree.
We already have gvec helpers for addition and subtraction, but must
add one for fabd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-12-peter.maydell@linaro.org
Convert the Neon VQDMULH and VQRDMULH 3-reg-same insns to
decodetree. These are the last integer operations in the
3-reg-same group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-11-peter.maydell@linaro.org
Convert the Neon integer VPADD 3-reg-same insns to decodetree. These
are 'pairwise' operations. (Note that VQRDMLAH, which shares the
same primary opcode but has U=1, has already been converted.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-10-peter.maydell@linaro.org
Convert the Neon integer VPMAX and VPMIN 3-reg-same insns to
decodetree. These are 'pairwise' operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-9-peter.maydell@linaro.org
Convert the VQSHL, VRSHL and VQRSHL insns in the 3-reg-same
group to decodetree. We have already implemented the size==0b11
case of these insns; this commit handles the remaining sizes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-8-peter.maydell@linaro.org
Convert the Neon VRHADD and VHSUB 3-reg-same insns to decodetree.
(These are all the other insns in 3-reg-same which were using
GEN_NEON_INTEGER_OP() and which are not pairwise or
reversed-operands.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-7-peter.maydell@linaro.org
Convert the Neon VABA and VABD insns in the 3-reg-same group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-6-peter.maydell@linaro.org
Convert the Neon VHADD insns in the 3-reg-same group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-5-peter.maydell@linaro.org
Convert the 64-bit element insns in the 3-reg-same group
to decodetree. This covers VQSHL, VRSHL and VQRSHL where
size==0b11.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-4-peter.maydell@linaro.org
Convert the Neon SHA instructions in the 3-reg-same group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-3-peter.maydell@linaro.org
Convert the Neon VQRDMLAH and VQRDMLSH insns in the 3-reg-same group
to decodetree. These don't use do_3same() because they want to
operate on VFP double registers, whose offsets are different from the
neon_reg_offset() calculations do_3same does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-2-peter.maydell@linaro.org
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Must clear the tail for AdvSIMD when SVE is enabled.
Fixes: ca40a6e6e3
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass a pointer directly to env->vfp.qc[0], rather than env.
This will allow SVE2, which does not modify QC, to pass a
pointer to dummy storage.
Change the return type of inl_qrdml.h_s16 to match the
sense of the operation: signed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These operations do not touch fp_status.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than perform the argument swap during code generation,
perform it during decode. This means it doesn't have to be
special cased later, and we can share code with aarch64 code
generation. Hopefully the decode comment addresses any confusion
that might arise in between.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Macro-ize the 5 nearly identical comparisons.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we've converted all cases to gvec, there is quite a bit
of dead code at the end of the function. Remove it.
Sink the call to gen_gvec_fn2i to the end, loading a function
pointer within the switch statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 1dc8425e55, while converting to gvec, I added an extra range check
against the shift count. This was unnecessary because the encoding of
the shift count produces 0 to the element size - 1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create vectorized versions of handle_shri_with_rndacc
for shift+round and shift+round+accumulate. Add out-of-line
helpers in preparation for longer vector lengths from SVE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
Now that we can pass 7 parameters, do not encode register
operands within simd_data.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200507172352.15418-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A KVM-only build won't be able to run TCG cpus.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As IDAU is a v8M feature, restrict it to the Aarch32 CPUs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504172448.9402-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use ARRAY_SIZE() to iterate over ARMCPUInfo[].
Since on the aarch64-linux-user build, arm_cpus[] is empty, add
the cpu_count variable and only iterate when it is non-zero.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the common set_feature() and unset_feature() functions
from cpu.c and cpu64.c to cpu.h.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Split Thomas's patch in two: set_feature, cpu_register]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the inlined declarations of set_feature()
from cpu*.c to cpu.h. To avoid clashing with the KVM
declarations, inline the few KVM calls.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
None of the sve helpers use TCGMemOpIdx any longer, so we can
stop passing it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This avoids the need for a separate set of helpers to implement
no-fault semantics, and will enable MTE in the future.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Follow the model set up for contiguous loads. This handles
watchpoints correctly for contiguous stores, recognizing the
exception before any changes to memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With sve_cont_ldst_pages, the differences between first-fault and no-fault
are minimal, so unify the routines. With cpu_probe_watchpoint, we are able
to make progress through pages with TLB_WATCHPOINT set when the watchpoint
does not actually fire.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle all of the watchpoints for active elements all at once,
before we've modified the vector register. This removes the
TLB_WATCHPOINT bit from page[].flags, which means that we can
use the normal fast path via RAM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First use of the new helper functions, so we can remove the
unused markup. No longer need a scratch for user-only, as
we completely probe the page set before reading; system mode
still requires a scratch for MMIO.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current interface includes a loop; change it to load a
single element. We will then be able to use the function
for ld{2,3,4} where individual vector elements are not adjacent.
Replace each call with the simplest possible loop over active
elements.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For contiguous predicated memory operations, we want to
minimize the number of tlb lookups performed. We have
open-coded this for sve_ld1_r, but for correctness with
MTE we will need this for all of the memory operations.
Create a structure that holds the bounds of active elements,
and metadata for two pages. Add routines to find those
active elements, lookup the pages, and run watchpoints
for those pages.
Temporarily mark the functions unused to avoid Werror.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we converted back to cpu_*_data_ra, we do not need to
do this ourselves.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the "normal" memory access functions, rather than the
softmmu internal helper functions directly.
Since fb901c905d, cpu_mem_index is now a simple extract
from env->hflags and not a large computation. Which means
that it's now more work to pass around this value than it
is to recompute it.
This only adjusts the primitives, and does not clean up
all of the uses within sve_helper.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling access_el3_aa32ns() works for AArch32 only cores
but it does not handle 32-bit EL2 on top of 64-bit EL3
for mixed 32/64-bit cores.
Merge access_el3_aa32ns_aa64any() into access_el3_aa32ns()
and only use the latter.
Fixes: 68e9c2fe65 ("target-arm: Add VTCR_EL2")
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200505141729.31930-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a few cases, we're able to remove some manual replication.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're going to want at least some of the NeonGen* typedefs
for the refactored 32-bit Neon decoder, so move them all
to translate.h since it makes more sense to keep them in
one group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-23-peter.maydell@linaro.org
Convert the Neon VMUL, VMLA, VMLS and VSHL insns in the
3-reg-same grouping to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-20-peter.maydell@linaro.org
Convert the Neon VQADD/VQSUB insns in the 3-reg-same grouping
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-19-peter.maydell@linaro.org
Convert the Neon comparison ops in the 3-reg-same grouping
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-18-peter.maydell@linaro.org
Convert the Neon 3-reg-same VMAX and VMIN insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-17-peter.maydell@linaro.org
Convert the Neon logic ops in the 3-reg-same grouping to decodetree.
Note that for the logic ops the 'size' field forms part of their
decode and the actual operations are always bitwise.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-16-peter.maydell@linaro.org
Convert the Neon 3-reg-same VADD and VSUB insns to decodetree.
Note that we don't need the neon_3r_sizes[op] check here because all
size values are OK for VADD and VSUB; we'll add this when we convert
the first insn that has size restrictions.
For this we need one of the GVecGen*Fn typedefs currently in
translate-a64.h; move them all to translate.h as a block so they
are visible to the 32-bit decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-15-peter.maydell@linaro.org
Convert the Neon "load/store single structure to one lane" insns to
decodetree.
As this is the last set of insns in the neon load/store group,
we can remove the whole disas_neon_ls_insn() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-14-peter.maydell@linaro.org
Convert the Neon "load single structure to all lanes" insns to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-13-peter.maydell@linaro.org
Convert the Neon "load/store multiple structures" insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-12-peter.maydell@linaro.org
Convert the VFM[AS]L (scalar) insns in the 2reg-scalar-ext group
to decodetree. These are the last ones in the group so we can remove
all the legacy decode for the group.
Note that in disas_thumb2_insn() the parts of this encoding space
where the decodetree decoder returns false will correctly be directed
to illegal_op by the "(insn & (1 << 28))" check so they won't fall
into disas_coproc_insn() by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-11-peter.maydell@linaro.org
Convert the V[US]DOT (scalar) insns in the 2reg-scalar-ext group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-10-peter.maydell@linaro.org
Convert VCMLA (scalar) in the 2reg-scalar-ext group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-9-peter.maydell@linaro.org
Convert the VFM[AS]L (vector) insns to decodetree. This is the last
insn in the legacy decoder for the 3same_ext group, so we can
delete the legacy decoder function for the group entirely.
Note that in disas_thumb2_insn() the parts of this encoding space
where the decodetree decoder returns false will correctly be directed
to illegal_op by the "(insn & (1 << 28))" check so they won't fall
into disas_coproc_insn() by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-8-peter.maydell@linaro.org
Convert the V[US]DOT (vector) insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-7-peter.maydell@linaro.org
Convert the VCADD (vector) insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-6-peter.maydell@linaro.org
Convert the VCMLA (vector) insns in the 3same extension group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-5-peter.maydell@linaro.org
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 Neon encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We follow the same pattern we did for the VFP decodetree conversion
(commit 78e138bc1f and following): code that deals
with Neon will be moving gradually out to translate-neon.vfp.inc,
which we #include into translate.c.
In order to share the decode files between A32 and T32, we
split Neon into 3 parts:
* data-processing
* load-store
* 'shared' encodings
The first two groups of instructions have similar but not identical
A32 and T32 encodings, so we need to manually transform the T32
encoding into the A32 one before calling the decoder; the third group
covers the Neon instructions which are identical in A32 and T32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-4-peter.maydell@linaro.org
We were accidentally permitting decode of Thumb Neon insns even if
the CPU didn't have the FEATURE_NEON bit set, because the feature
check was being done before the call to disas_neon_data_insn() and
disas_neon_ls_insn() in the Arm decoder but was omitted from the
Thumb decoder. Push the feature bit check down into the called
functions so it is done for both Arm and Thumb encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200430181003.21682-3-peter.maydell@linaro.org
Somewhere along theline we accidentally added a duplicate
"using D16-D31 when they don't exist" check to do_vfm_dp()
(probably an artifact of a patchseries rebase). Remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200430181003.21682-2-peter.maydell@linaro.org
MIDR_EL1 is a 64-bit system register with the top 32-bit being RES0.
Represent it in QEMU's ARMCPU struct with a uint64_t, not a
uint32_t.
This fixes an error when compiling with -Werror=conversion
because we were manipulating the register value using a
local uint64_t variable:
target/arm/cpu64.c: In function ‘aarch64_max_initfn’:
target/arm/cpu64.c:628:21: error: conversion from ‘uint64_t’ {aka ‘long unsigned int’} to ‘uint32_t’ {aka ‘unsigned int’} may change value [-Werror=conversion]
628 | cpu->midr = t;
| ^
and future-proofs us against a possible future architecture
change using some of the top 32 bits.
Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20200428172634.29707-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In aarch64_max_initfn() we update both 32-bit and 64-bit ID
registers. The intended pattern is that for 64-bit ID registers we
use FIELD_DP64 and the uint64_t 't' register, while 32-bit ID
registers use FIELD_DP32 and the uint32_t 'u' register. For
ID_AA64DFR0 we accidentally used 'u', meaning that the top 32 bits of
this 64-bit ID register would end up always zero. Luckily at the
moment that's what they should be anyway, so this bug has no visible
effects.
Use the right-sized variable.
Fixes: 3bec78447a
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200423110915.10527-1-peter.maydell@linaro.org
The ARMv8.2-TTS2UXN feature extends the XN field in stage 2
translation table descriptors from just bit [54] to bits [54:53],
allowing stage 2 to control execution permissions separately for EL0
and EL1. Implement the new semantics of the XN field and enable
the feature for our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-5-peter.maydell@linaro.org
For ARMv8.2-TTS2UXN, the stage 2 page table walk wants to know
whether the stage 1 access is for EL0 or not, because whether
exec permission is given can depend on whether this is an EL0
or EL1 access. Add a new argument to get_phys_addr_lpae() so
the call sites can pass this information in.
Since get_phys_addr_lpae() doesn't already have a doc comment,
add one so we have a place to put the documentation of the
semantics of the new s1_is_el0 argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-4-peter.maydell@linaro.org
The access_type argument to get_phys_addr_lpae() is an MMUAccessType;
use the enum constant MMU_DATA_LOAD rather than a literal 0 when we
call it in S1_ptw_translate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-3-peter.maydell@linaro.org
We define ARMMMUIdx_Stage2 as being an MMU index which uses a QEMU
TLB. However we never actually use the TLB -- all stage 2 lookups
are done by direct calls to get_phys_addr_lpae() followed by a
physical address load via address_space_ld*().
Remove Stage2 from the list of ARM MMU indexes which correspond to
real core MMU indexes, and instead put it in the set of "NOTLB" ARM
MMU indexes.
This allows us to drop NB_MMU_MODES to 11. It also means we can
safely add support for the ARMv8.3-TTS2UXN extension, which adds
permission bits to the stage 2 descriptors which define execute
permission separatel for EL0 and EL1; supporting that while keeping
Stage2 in a QEMU TLB would require us to use separate TLBs for
"Stage2 for an EL0 access" and "Stage2 for an EL1 access", which is a
lot of extra complication given we aren't even using the QEMU TLB.
In the process of updating the comment on our MMU index use,
fix a couple of other minor errors:
* NS EL2 EL2&0 was missing from the list in the comment
* some text hadn't been updated from when we bumped NB_MMU_MODES
above 8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-2-peter.maydell@linaro.org
According to Arm ARM, VQDMULL is only valid when U=0, while having
U=1 is unallocated.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Fixes: 695272dcb9 ("target-arm: Handle UNDEF cases for Neon 3-regs-different-widths")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will move this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Only take cpu_register() from Thomas's patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Under KVM these registers are written by the hardware.
Restrict the writefn handlers to TCG to avoid when building
without TCG:
LINK aarch64-softmmu/qemu-system-aarch64
target/arm/helper.o: In function `do_ats_write':
target/arm/helper.c:3524: undefined reference to `raise_exception'
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200418162808.4680-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 41a4bf1fea the added code to set the CNP
field in ID_MMFR4 for the AArch64 'max' CPU had a typo
where it used the wrong variable name, resulting in ID_MMFR4
fields AC2, XNX and LSM being wrong. Fix the typo.
Fixes: 41a4bf1fea
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20200422124501.28015-1-peter.maydell@linaro.org
Introduce gdb_get_zeroes() to fill a GByteArray with zeroes.
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200414102427.7459-1-philmd@redhat.com>
[AJB: used slightly more gliby set_size approach]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200414200631.12799-13-alex.bennee@linaro.org>
An old comment in get_phys_addr_lpae() claims that the code does not
support the different format TCR for VTCR_EL2. This used to be true
but it is not true now (in particular the aa64_va_parameters() and
aa32_va_parameters() functions correctly handle the different
register format by checking whether the mmu_idx is Stage2).
Remove the out of date parts of the comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200331143407.3186-1-peter.maydell@linaro.org
Our implementation of the PSTATE.PAN bit incorrectly cleared all
access permission bits for privileged access to memory which is
user-accessible. It should only affect the privileged read and write
permissions; execute permission is dealt with via XN/PXN instead.
Fixes: 81636b70c2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330170651.20901-1-peter.maydell@linaro.org
While support for parsing ieee_half in the XML description was added
to gdb in 2019 (a6d0f249) there is no easy way for the gdbstub to know
if the gdb end will understand it. Disable it for now and allow older
gdbs to successfully connect to the default -cpu max SVE enabled
QEMUs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200402143913.24005-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_current_el() should be invoked after mode switching. Otherwise, we
get a wrong current EL value, since current EL is also determined by
current mode.
Fixes: 4a2696c0d4 ("target/arm: Set PAN bit as required on exception entry")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200328140232.17278-1-changbin.du@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a BAD_SHIFT with ctz32(imm5), with imm5 == 0.
This is an invalid encoding, but we diagnose that just below
by rejecting size > 3. Avoid the warning by sinking the
computation of index below the check.
Reported-by: Coverity (CID 1421965)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity raised a shed-load of errors cascading from inferring
that clz32(immh) might yield 32, from immh might be 0.
While immh cannot be 0 from encoding, it is not obvious even to
a human how we've checked that: via the filtering provided by
data_proc_simd[].
Reported-by: Coverity (CID 1421923, and more)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity rightly notes that ctz32(bas) on 0 will return 32,
which makes the len calculation a BAD_SHIFT.
A value of 0 in DBGWCR<n>_EL1.BAS is reserved. Simply move
the existing check we have for this case.
Reported-by: Coverity (CID 1421964)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For system emulation we need to check the state of the GIC before we
report the value. However this isn't relevant to exporting of the
value to linux-user and indeed breaks the exported value as set by
modify_arm_cp_regs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-20-alex.bennee@linaro.org>
We also expose a the helpers to read/write the the registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-19-alex.bennee@linaro.org>
The Linux kernel chooses the default of 64 bytes for SVE registers on
the basis that it is the largest size on known hardware that won't
grow the signal frame. We still honour the sve-max-vq property and
userspace can expand the number of lanes by calling PR_SVE_SET_VL.
This should not make any difference to SVE enabled software as the SVE
is of course vector length agnostic.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-18-alex.bennee@linaro.org>
This is described as optional but I'm not convinced of the numbering
when multiple target fragments are sent.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-17-alex.bennee@linaro.org>
We will want to generate similar dynamic XML for gdbstub support of
SVE registers (the upstream doesn't use XML). To that end lightly
rename a few things to make the distinction.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-16-alex.bennee@linaro.org>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-12-alex.bennee@linaro.org>
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.
Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_SET_VCPU_EVENTS might actually lead to vcpu registers being modified.
As such this should be the last step of sync to avoid potential overwriting
of whatever changes KVM might have done.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200312003401.29017-2-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert kvm_arm_vgic_probe() so that it returns a
bitmap of supported in-kernel emulation VGIC versions instead
of the max version: at the moment values can be v2 and v3.
This allows to expose the case where the host GICv3 also
supports GICv2 emulation. This will be useful to choose the
default version in KVM accelerated mode.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200311131618.7187-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must include the tag in the FAR_ELx register when raising
an addressing exception. Which means that we should not clear
out the tag during translation.
We cannot at present comply with this for user mode, so we
retain the clean_data_tbi function for the moment, though it
no longer does what it says on the tin for system mode. This
function is to be replaced with MTE, so don't worry about the
slight misnaming.
Buglink: https://bugs.launchpad.net/qemu/+bug/1867072
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We fail to validate the upper bits of a virtual address on a
translation disabled regime, as per AArch64.TranslateAddressS1Off.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a couple of comment typos.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-5-peter.maydell@linaro.org
A write to the CONTROL register can change our current EL (by
writing to the nPRIV bit). That means that we can't assume
that s->current_el is still valid in trans_MSR_v7m() when
we try to rebuild the hflags.
Add a new helper rebuild_hflags_m32_newel() which, like the
existing rebuild_hflags_a32_newel(), recalculates the current
EL from scratch, and use it in trans_MSR_v7m().
This fixes an assertion about an hflags mismatch when the
guest changes privilege by writing to CONTROL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-4-peter.maydell@linaro.org
For M-profile CPUs, the FAULTMASK value affects the CPU's MMU index
(it changes the NegPri bit). We update the hflags after calls
to the v7m_msr helper in trans_MSR_v7m() but forgot to do so
in trans_CPS_v7m().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-3-peter.maydell@linaro.org
This data access was forgotten when we added support for cleaning
addresses of TBI information.
Fixes: 3a471103ac
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200302175829.2183-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function does not write registers, and only reads them by
implication via the exception path.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an aarch64-only function. Move it out of the shared file.
This patch is code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We missed this case within AArch64.ExceptionReturn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If by context we know that we're in AArch64 mode, we need not
test for M-profile when reconstructing the full ARMMMUIdx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now cache the core mmu_idx in env->hflags. Rather than recompute
from scratch, extract the field. All of the uses of cpu_mmu_index
within target/arm are within helpers, and env->hflags is always stable
within a translation block from whence helpers are called.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that
we can unconditionally use pointer bit 55 to index into our
composite TBI1:TBI0 field.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to tlb maintenance insns.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to cache maintenance insns that operate
to the point of unification. There are no longer any references to
plain aa64_cacheop_access, so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to cache maintenance insns that operate
to the point of coherency or persistence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to the auxiliary control registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the {TGE,E2H} == '11' masking to ARMv8.6.
If EL2 is configured for aarch32, disable all of
the bits that are RES0 in aarch32 mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have disabled EL2 and EL3 for user-only, which means that these
registers "don't exist" and should not be set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In arm_cpu_reset, we configure many system registers so that user-only
behaves as it should with a minimum of ifdefs. However, we do not set
all of the system registers as required for a cpu with EL2 and EL3.
Disabling EL2 and EL3 mean that we will not look at those registers,
which means that we don't have to worry about configuring them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't merely start with v8.0, handle v7VE as well. Ensure that writes
from aarch32 mode do not change bits in the other half of the register.
Protect reads of aa64 id registers with ARM_FEATURE_AARCH64.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv8.2-TTCNP extension allows an implementation to optimize by
sharing TLB entries between multiple cores, provided that software
declares that it's ready to deal with this by setting a CnP bit in
the TTBRn_ELx. It is mandatory from ARMv8.2 onward.
For QEMU's TLB implementation, sharing TLB entries between different
cores would not really benefit us and would be a lot of work to
implement. So we implement this extension in the "trivial" manner:
we allow the guest to set and read back the CnP bit, but don't change
our behaviour (this is an architecturally valid implementation
choice).
The only code path which looks at the TTBRn_ELx values for the
long-descriptor format where the CnP bit is defined is already doing
enough masking to not get confused when the CnP bit at the bottom of
the register is set, so we can simply add a comment noting why we're
relying on that mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200225193822.18874-1-peter.maydell@linaro.org
The ARMv8.3-CCIDX extension makes the CCSIDR_EL1 system ID registers
have a format that uses the full 64 bit width of the register, and
adds a new CCSIDR2 register so AArch32 can get at the high 32 bits.
QEMU doesn't implement caches, so we just treat these ID registers as
opaque values that are set to the correct constant values for each
CPU. The only thing we need to do is allow 64-bit values in our
cssidr[] array and provide the CCSIDR2 accessors.
We don't set the CCIDX field in our 'max' CPU because the CCSIDR
constant values we use are the same as the ones used by the
Cortex-A57 and they are in the old 32-bit format. This means
that the extra regdef added here is unused currently, but it
means that whenever in the future we add a CPU that does need
the new 64-bit format it will just work when we set the cssidr
values and the ID registers for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224182626.29252-1-peter.maydell@linaro.org
The v8.4-RCPC extension implements some new instructions:
* LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW
* STLUR, STLURB, STLURH
These are all in a new subgroup of encodings that sits below the
top-level "Loads and Stores" group in the Arm ARM.
The STLUR* instructions have standard store-release semantics; the
LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose
to implement them as the slightly stronger Load-Acquire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
The v8.3-RCPC extension implements three new load instructions
which provide slightly weaker consistency guarantees than the
existing load-acquire operations. For QEMU we choose to simply
implement them with a full LDAQ barrier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
We missed an instance of using FIELD_EX32 on a 64-bit ID
register, in isar_feature_aa64_pmu_8_4(). Fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-2-peter.maydell@linaro.org
Passing the raw op field from the manual is less instructive
than it might be. Do the full decode and use the existing
helpers to perform the expansion.
Since these are v8 insns, VECLEN+VECSTRIDE are already RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Passing the raw o1 and o2 fields from the manual is less
instructive than it might be. Do the full decode and let
the trans_* functions pass in booleans to a helper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Those vfp instructions without extra opcode fields can
share a common @format for brevity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have converted all tests against these features
to ISAR tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Have the calls adjacent as an intermediate step toward
actually merging the decodes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we no longer have an early check for ARM_FEATURE_VFP,
we can use the proper ISA check in trans_VLLDM_VLSTM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have proper ISA checks within each trans_* function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All remaining tests for VFP4 are for fused multiply-add insns.
Since the MVFR1 field is used for both VFP and NEON, move its adjustment
from the !has_neon block to the (!has_vfp && !has_neon) block.
Test for vfp of the appropraite width alongside the test for simdfmac
within translate-vfp.inc.c. Within disas_neon_data_insn, we have
already tested for ARM_FEATURE_NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will eventually remove the early ARM_FEATURE_VFP test,
so add a proper test for each trans_* that does not already
have another ISA test.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sort this check to the start of a trans_* function.
Merge this with any existing test for fpdp_v2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shuffle the order of the checks so that we test the ISA
before we test anything else, such as the register arguments.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot easily create "any" functions for these, because the
ID_AA64PFR0 fields for FP and SIMD signal "enabled" with zero.
Which means that an aarch32-only cpu will return incorrect results
when testing the aarch64 registers.
To use these, we must either have context or additionally test
vs ARM_FEATURE_AARCH64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly use these to test for VFPv2 and VFPv3
in different situations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old name, isar_feature_aa32_fpdp, does not reflect
that the test includes VFPv2. We will introduce another
feature tests for VFPv3.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this in the places that were checking ARM_FEATURE_VFP, and
are obviously testing for the existance of the register set
as opposed to testing for some particular instruction extension.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had set this for aarch32-only in arm_max_initfn, but
failed to set the same bit for aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200218190958.745-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to convert FEATURE tests to ISAR tests,
so FPSP needs to be set for these cpus, like we have
already for FPDP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214181547.21408-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many uses of ARM_FEATURE_VFP3 are testing for the number of simd
registers implemented. Use the proper test vs MVFR0.SIMDReg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214181547.21408-4-richard.henderson@linaro.org
[PMM: fix typo in commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old name, isar_feature_aa32_fp_d32, does not reflect
the MVFR0 field name, SIMDReg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200214181547.21408-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped one long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We still need two different helpers, since NEON and SVE2 get the
inputs from different locations within the source vector. However,
we can convert both to the same internal form for computation.
The sve2 helper is not used yet, but adding it with this patch
helps illustrate why the neon changes are helpful.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Extend the implementation to operate on uint64_t instead of uint32_t.
Use a counted inner loop instead of terminating when op1 goes to zero,
looking toward the required implementation for ARMv8.4-DIT.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions shift left or right depending on the sign
of the input, and 7 bits are significant to the shift. This
requires several masks and selects in addition to the actual
shifts to form the complete answer.
That said, the operation is still a small improvement even for
two 64-bit elements -- 13 vector operations instead of 2 * 7
integer operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ACTLR2 and HACTLR2 AArch32 system registers didn't exist in ARMv7
or the original ARMv8. They were later added as optional registers,
whose presence is signaled by the ID_MMFR4.AC2 field. From ARMv8.2
they are mandatory (ie ID_MMFR4.AC2 must be non-zero).
We implemented HACTLR2 in commit 0e0456ab88, but we
incorrectly made it exist for all v8 CPUs, and we didn't implement
ACTLR2 at all.
Sort this out by implementing both registers only when they are
supposed to exist, and setting the ID_MMFR4 bit for -cpu max.
Note that this removes HACTLR2 from our Cortex-A53, -A47 and -A72
CPU models; this is correct, because those CPUs do not implement
this register.
Fixes: 0e0456ab88
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-22-peter.maydell@linaro.org
Cut-and-paste errors mean we're using FIELD_EX64() to extract fields from
some 32-bit ID register fields. Use FIELD_EX32() instead. (This makes
no difference in behaviour, it's just more consistent.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-21-peter.maydell@linaro.org
Now we have moved ID_MMFR4 into the ARMISARegisters struct, we
can define and use an isar_feature for the presence of the
ARMv8.2-AA32HPD feature, rather than open-coding the test.
While we're here, correct a comment typo which missed an 'A'
from the feature name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-20-peter.maydell@linaro.org
The isar_feature_aa32_pan and isar_feature_aa32_ats1e1 functions
are supposed to be testing fields in ID_MMFR3; but a cut-and-paste
error meant we were looking at MVFR0 instead.
Fix the functions to look at the right register; this requires
us to move at least id_mmfr3 to the ARMISARegisters struct; we
choose to move all the ID_MMFRn registers for consistency.
Fixes: 3d6ad6bb46
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-19-peter.maydell@linaro.org
The LC bit in the PMCR_EL0 register is supposed to be:
* read/write
* RES1 on an AArch64-only implementation
* an architecturally UNKNOWN value on reset
(and use of LC==0 by software is deprecated).
We were implementing it incorrectly as read-only always zero,
though we do have all the code needed to test it and behave
accordingly.
Instead make it a read-write bit which resets to 1 always, which
satisfies all the architectural requirements above.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-18-peter.maydell@linaro.org
The PMCR_EL0.DP bit is bit 5, which is 0x20, not 0x10. 0x10 is 'X'.
Correct our #define of PMCRDP and add the missing PMCRX.
We do have the correct behaviour for handling the DP bit being
set, so this fixes a guest-visible bug.
Fixes: 033614c47d
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-17-peter.maydell@linaro.org
Set the ID register bits to provide ARMv8.4-PMU (and implicitly
also ARMv8.1-PMU) in the 'max' CPU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-16-peter.maydell@linaro.org
The ARMv8.4-PMU extension adds:
* one new required event, STALL
* one new system register PMMIR_EL1
(There are also some more L1-cache related events, but since
we don't implement any cache we don't provide these, in the
same way we don't provide the base-PMUv3 cache events.)
The STALL event "counts every attributable cycle on which no
attributable instruction or operation was sent for execution on this
PE". QEMU doesn't stall in this sense, so this is another
always-reads-zero event.
The PMMIR_EL1 register is a read-only register providing
implementation-specific information about the PMU; currently it has
only one field, SLOTS, which defines behaviour of the STALL_SLOT PMU
event. Since QEMU doesn't implement the STALL_SLOT event, we can
validly make the register read zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-15-peter.maydell@linaro.org
The ARMv8.1-PMU extension requires:
* the evtCount field in PMETYPER<n>_EL0 is 16 bits, not 10
* MDCR_EL2.HPMD allows event counting to be disabled at EL2
* two new required events, STALL_FRONTEND and STALL_BACKEND
* ID register bits in ID_AA64DFR0_EL1 and ID_DFR0
We already implement the 16-bit evtCount field and the
HPMD bit, so all that is missing is the two new events:
STALL_FRONTEND
"counts every cycle counted by the CPU_CYCLES event on which no
operation was issued because there are no operations available
to issue to this PE from the frontend"
STALL_BACKEND
"counts every cycle counted by the CPU_CYCLES event on which no
operation was issued because the backend is unable to accept
any available operations from the frontend"
QEMU never stalls in this sense, so our implementation is trivial:
always return a zero count.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-14-peter.maydell@linaro.org
Now we have isar_feature test functions that look at fields in the
ID_AA64DFR0_EL1 and ID_DFR0 ID registers, add the code that reads
these register values from KVM so that the checks behave correctly
when we're using KVM.
No isar_feature function tests ID_AA64DFR1_EL1 or DBGDIDR yet, but we
add it to maintain the invariant that every field in the
ARMISARegisters struct is populated for a KVM CPU and can be relied
on. This requirement isn't actually written down yet, so add a note
to the relevant comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-13-peter.maydell@linaro.org
We're going to want to read the DBGDIDR register from KVM in
a subsequent commit, which means it needs to be in the
ARMISARegisters sub-struct. Move it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-12-peter.maydell@linaro.org
The AArch32 DBGDIDR defines properties like the number of
breakpoints, watchpoints and context-matching comparators. On an
AArch64 CPU, the register may not even exist if AArch32 is not
supported at EL1.
Currently we hard-code use of DBGDIDR to identify the number of
breakpoints etc; this works for all our TCG CPUs, but will break if
we ever add an AArch64-only CPU. We also have an assert() that the
AArch32 and AArch64 registers match, which currently works only by
luck for KVM because we don't populate either of these ID registers
from the KVM vCPU and so they are both zero.
Clean this up so we have functions for finding the number
of breakpoints, watchpoints and context comparators which look
in the appropriate ID register.
This allows us to drop the "check that AArch64 and AArch32 agree
on the number of breakpoints etc" asserts:
* we no longer look at the AArch32 versions unless that's the
right place to be looking
* it's valid to have a CPU (eg AArch64-only) where they don't match
* we shouldn't have been asserting the validity of ID registers
in a codepath used with KVM anyway
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-11-peter.maydell@linaro.org
Add the 64-bit version of the "is this a v8.1 PMUv3?"
ID register check function, and the _any_ version that
checks for either AArch32 or AArch64 support. We'll use
this in a later commit.
We don't (yet) do any isar_feature checks on ID_AA64DFR1_EL1,
but we move id_aa64dfr1 into the ARMISARegisters struct with
id_aa64dfr0, for consistency.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-10-peter.maydell@linaro.org
Instead of open-coding a check on the ID_DFR0 PerfMon ID register
field, create a standardly-named isar_feature for "does AArch32 have
a v8.1 PMUv3" and use it.
This entails moving the id_dfr0 field into the ARMISARegisters struct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-9-peter.maydell@linaro.org
We already define FIELD macros for ID_DFR0, so use them in the
one place where we're doing direct bit value manipulation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-8-peter.maydell@linaro.org
Add FIELD() definitions for the ID_AA64DFR0_EL1 and use them
where we currently have hard-coded bit values.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-7-peter.maydell@linaro.org
Pull the code that defines the various PMU registers out
into its own function, matching the pattern we have
already for the debug registers.
Apart from one style fix to a multi-line comment, this
is purely movement of code with no changes to it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-6-peter.maydell@linaro.org
Instead of open-coding "ARM_FEATURE_AARCH64 ? aa64_predinv: aa32_predinv",
define and use an any_predinv isar_feature test function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-5-peter.maydell@linaro.org
Our current usage of the isar_feature feature tests almost always
uses an _aa32_ test when the code path is known to be AArch32
specific and an _aa64_ test when the code path is known to be
AArch64 specific. There is just one exception: in the vfp_set_fpscr
helper we check aa64_fp16 to determine whether the FZ16 bit in
the FP(S)CR exists, but this code is also used for AArch32.
There are other places in future where we're likely to want
a general "does this feature exist for either AArch32 or
AArch64" check (typically where architecturally the feature exists
for both CPU states if it exists at all, but the CPU might be
AArch32-only or AArch64-only, and so only have one set of ID
registers).
Introduce a new category of isar_feature_* functions:
isar_feature_any_foo() should be tested when what we want to
know is "does this feature exist for either AArch32 or AArch64",
and always returns the logical OR of isar_feature_aa32_foo()
and isar_feature_aa64_foo().
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-4-peter.maydell@linaro.org
In take_aarch32_exception(), we know we are dealing with a CPU that
has AArch32, so the right isar_feature test is aa32_pan, not aa64_pan.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-3-peter.maydell@linaro.org
Enforce a convention that an isar_feature function that tests a
32-bit ID register always has _aa32_ in its name, and one that
tests a 64-bit ID register always has _aa64_ in its name.
We already follow this except for three cases: thumb_div,
arm_div and jazelle, which all need _aa32_ adding.
(As noted in the comment, isar_feature_aa32_fp16_arith()
is an exception in that it currently tests ID_AA64PFR0_EL1,
but will switch to MVFR1 once we've properly implemented
FP16 for AArch32.)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-2-peter.maydell@linaro.org
For the purpose of rebuild_hflags_a64, we do not need to compute
all of the va parameters, only tbi. Moreover, we can compute them
in a form that is more useful to storing in hflags.
This eliminates the need for aa64_va_parameter_both, so fold that
in to aa64_va_parameter. The remaining calls to aa64_va_parameter
are in get_phys_addr_lpae and in pauth_helper.c.
This reduces the total cpu consumption of aa64_va_parameter in a
kernel boot plus a kvm guest kernel boot from 3% to 0.5%.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that aa64_va_parameters_both sets select based on the number
of ranges in the regime, the ttbr1_valid check is redundant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Select should always be 0 for a regime with one range.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell