reads the high bits from the mailbox registers. It is probably waiting for
the dsp to read the data from the cpu-to-dsp mailbox or for the dsp to
write to the dsp-to-cpu mailbox.
This about removes DSP::Read16 from lle profiles where it previously used
up to 2% of all system time. Also speeds up games quiet a bit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6719 8ced0084-cf51-0410-be5f-012b33b47a6e
the private SVN_REV_STR which relies on finicky build mechanics.
With SCons, kill the old svnrev.h in Source if still present.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6715 8ced0084-cf51-0410-be5f-012b33b47a6e
Tweaked SetMultiVSConstant functions to prefer glProgramEnvParameters4fvEXT over glProgramEnvParameter4fvARB with fall-back for older harder.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6713 8ced0084-cf51-0410-be5f-012b33b47a6e
Also a small change to the mixer. This should fix audio throttling in cases where num_samples > RESERVED_SAMPLES. This seems to happen now with zelda ucode games, possibly others.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6711 8ced0084-cf51-0410-be5f-012b33b47a6e
additional input queueing in IOdarwin appears to be unnecessary.
IOBluetoothDeviceInquiry does not find already connected devices,
so no need to filter those out.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6710 8ced0084-cf51-0410-be5f-012b33b47a6e
Avoid sending the Wii OS bluetooth packets with uninitialized data
past the nominal length of the report.
XXX IOWin.cpp still always returns MAX_PAYLOAD because I don't have
a Windows environment to test with.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6708 8ced0084-cf51-0410-be5f-012b33b47a6e
Applied the logic from r6691 to the LLE dec/add/sub functions so they work without ToMask. This should give a modest speedup for these.
Pierre's AR inc was already perfect and I only adjusted its logic a bit for visual consistency between the interpreter and JIT code.
Also applied Pierre's optimization from the LLE inc to the Int inc.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6707 8ced0084-cf51-0410-be5f-012b33b47a6e
GX_TF_RGBA8 texture decoder optimized with SSE2 producing a ~68% speed increase over reference C implementation.
TABified the entire document per NeoBrainX. :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6706 8ced0084-cf51-0410-be5f-012b33b47a6e
~25% speed improvement in decoding GX_TF_RGB5A3 textures which aren't used very much. I thought it would help for movie playback but I misled myself. Video playback has nothing to do with this texture format.
Next I'll see if I can knock out some of these other texture decoders. Byte swizzling I'm sure can somehow be accomplished using _mm_unpacklo_epi8 trickery, so that'd be another big win I hope.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6698 8ced0084-cf51-0410-be5f-012b33b47a6e
Changed the EFB color order from RGBA to ABGR to emulate it correctly on little-endian platforms. Added some enumerations to clear up what components are which colors. Fixed the TEV alpha input LUT which would have caused problems if anything was doing alpha comparisons.
Changed box filter for EFB copies from 3x3 to 2x2 because that is probably correct. Also makes the math nicer.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6696 8ced0084-cf51-0410-be5f-012b33b47a6e
TextureDecoder.cpp: merged two functionally identical decode5A3RGBA and decode5A3rgba methods.
OpcodeDecoding.cpp and DLCache.cpp: optimization for GX_LOAD_XF_REG. The PSUHFB solution sounds better for SSSE3, but this is a small win for the default case.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6692 8ced0084-cf51-0410-be5f-012b33b47a6e
Adjusted the code work without ToMask.
This code should be functionally identical for all inputs to the previous code.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6691 8ced0084-cf51-0410-be5f-012b33b47a6e
* Optimised out the R11 ImmPtr instructions
* Made the whitespacing a little more consistent
* Disabled block linking while it is being reworked
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6688 8ced0084-cf51-0410-be5f-012b33b47a6e
functions accidentally added. Fixed the jitted ar register arithmetic.
Added a CMakeList.txt for the UnitTests, but did not add the subdirectory
to Source/CMakeLists.txt.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6687 8ced0084-cf51-0410-be5f-012b33b47a6e
A lot of tests are failing right now, not sure yet if this is caused by the recent reg changes or other stuff (at least broken according to tests: iar, subarn, addarn, 'ir, 'nr, 'l, 's, 'sn, 'ln, 'lsn, 'lsm, 'lsnm, 'sl etc - err, most/all that use increase/decrease)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6683 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed a bug in the JCC instruction.
* Changed the cycle count from u32 to u16.
* Added cycle counting to the block linker.
* Optimised the branch exit slightly.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6681 8ced0084-cf51-0410-be5f-012b33b47a6e
(acc and ax) and product register with one read/write.
Gives a minuscule speedup of not more than 4%. In exchange, breaks all
your out-of-tree changes to dsp. Tests are not building again, yet.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6680 8ced0084-cf51-0410-be5f-012b33b47a6e
Whatever that means, it fixes that stupid Super Mario Sunshine glitch and possibly lots of other stuff, so test as many glitchy games as possible with this ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6669 8ced0084-cf51-0410-be5f-012b33b47a6e
Should fix almost all regressions of the recent ClearScreen changes and keep the fixed stuff.
The Super Mario Sunshine glitch is caused by another issue and will be addressed in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6668 8ced0084-cf51-0410-be5f-012b33b47a6e
assembler for JIT. Replace JIT ToMask() with a different variant. Remove
superfluous zeroWriteBackLog calls(added by me).
Core/Common: Don't bother creating a string and calling into a Logs trigger()
when there is noone listening. Change AtomicLoadAcquire for gcc to just
make the compiler not reorder memory accesses around it instead of doing
a full memory barrier, per the comment in the win32 variant.
Core/AudioCommon: Fix a use of uninitialized variable inside libalsa.
Microbenchmarking results for ToMask variants:(1 000 000 000 iterations):
cpu\variant| shifts | bit scan
intel mobile C2D@2.5GHz | 5.5s | 4.0s
amd athlon64x2@3GHz | 6.1s | 6.4s
(including some constant overhead identical to both variants)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6667 8ced0084-cf51-0410-be5f-012b33b47a6e
corrected peek color and peek z to correctly emulate real hardware formats.
implements native gamma correction.(i don't own any game that uses this functionality so i will appreciate feedback)
i need a lot of feedback in this changes please
enjoy
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6664 8ced0084-cf51-0410-be5f-012b33b47a6e
make some changes to the Clear code. please test a lot , the point of this commit is to determine the correct behavior of the efb clearing so feedback is welcome
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6663 8ced0084-cf51-0410-be5f-012b33b47a6e
1) What is the FIFO? The fifo is a ring queue for write (CPU) and read (GPU) the graphics commands.
2) What is the Brakpoints? The breakpoint is the FIFO mark to allow parallel work (CPU-GPU) When the GPU reached the breakpoint must stop read immediately until this Breakpoint will be removed for the CPU.
3) What is an overflow? The CPU write all room FIFO possible, and like a ring overwrite commands not processed yet.
4) ¿Why you have an overflow? In theory should not have an overflow never because the fifo has another mark (High Watermark) When the CPU Write reach this mark raise a CP interruption and the FIFO CPU WRITES should stop write until distance between READ POINTER AND WRITE POINTER will be equal to another mark (LO Watemark to prevent and overflow.
5) ¡So if impossible why you have overflows? Simple, the CP interruption is processed later and the Overflow happens. (there is a lot of theories about this)
6) ¿Why is no so simple like when CPU WRITE POINTER is near to the end of the FIFO only process pending graphics command?
Because when this happens sometimes we are in BREAKPOINT and is IMPOSIBLE process the graphics commands.
- This HACK process the pending data when CPU WRITE POINTER is 32 bytes before the end of the fifo, and if there is a Breakpoint force the situation to process the commands and prevent an overflown.
In theory you have not see "FIFO is overflown by GatherPipe nCPU thread is too fast!" anymore. But if you have a hang in game where you had this please read the NOTICE LOG in user\logs, I've added this message "FIFO is almost in overflown, BreakPoint" when the hack is activated. (I will delete this message very soon)
Good Luck!! PD: Shuffle sorry for the large commit description :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6662 8ced0084-cf51-0410-be5f-012b33b47a6e
on OS X as on other Unices so OS X initial installs aren't so easily
broken by files being created in constructors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6661 8ced0084-cf51-0410-be5f-012b33b47a6e
* Completed the JIT versions of the DSP Multiplier instructions (5 instructions added).
* Bug fixed the dec and lsr16 instructions.
* Minor code clean-up.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6657 8ced0084-cf51-0410-be5f-012b33b47a6e
* Completed the JIT versions of the DSP arithmetic instructions (28 instructions added).
* Added JIT versions of maddx and msubx (thanks to LM1234).
x64 only
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6652 8ced0084-cf51-0410-be5f-012b33b47a6e
logging: turn off write to file
core: don't insert anything in memcard b slot
video: efb scale to integral, AF to 1x
audio: 100% volume, 48KHz sample rate
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6650 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 3703.
Note that HLE wiimote activation is currently a little broken, so to
use multiple wiimotes you need to open the wiimote configuration window,
refresh (connect to) the real wiimotes, start the emulation and then
select Connect Wiimote 2/3/4 from the Tools menu or with hotkeys.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6648 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimote bd's are now read from (or added to if < 4 exist) SysConf
in theory you should be able to use any valid sysconf file now,
but i would advise against using a dolphin edited SysConf on a wii
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6646 8ced0084-cf51-0410-be5f-012b33b47a6e
- Clear alpha channel to 0xFF instead of 0x00 whenever we (re-)create the EFB texture
- Disable color/alpha channels whenever the actual EFB format doesn't use them
Fixes issue 2826.
Fixes issue 1879.
Please check if issue 3014 is fixed now, as well as any other games which might have broken due to ClearScreen changes.
For what it's worth, Super Mario Sunshine still shows a small glitch even with these changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6635 8ced0084-cf51-0410-be5f-012b33b47a6e
* change File::GetSize to fetch the size directly from the open file instead
of stat'ing it when challed with a FILE*
* use changed File::GetSize(FILE *f) instead of calling with file name in two
places
* remove "seek_pos % file_size" hack for ZTP, so one can seek to the end of
file again. Please check Zelda: Twilight Princess for regressions
* return error codes when reading or writing from/to a file
A lot of those changes are from j4ck.fr0st, so kudos to him.
I did not change the file open mode for ISFS_OPEN_WRITE to "wb". While that
would probably be more correct, it says in the comment that it might affect
Mario Kart Wii. I would prefer somebody with that game try that change
locally first.
Please check your games for regressions (or even improvement). Some games that
may be affected are Zelda - Twilight Princess and Metroid Prime 3.
Fixes issue 1749
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6634 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added 21 Arithmetic instructions to the JIT
* Used the DSPAnalyser to identify arithmetic/multiplier instructions that precede a conditional branch. This allows the JIT to skip updating the SR when nothing would read from it. Marked all arithmetic/multiplier instructions in the DSPTable for this purpose.
* Converted CheckExternalInterrupt into ASM
* Fixed a couple instructions in DSP Load/Store
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6633 8ced0084-cf51-0410-be5f-012b33b47a6e
avoid wxWidgets sounding the system beep for unhandled key events
when receiving pad/wiimote keypresses separately from HID devices.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6630 8ced0084-cf51-0410-be5f-012b33b47a6e
Will fix some games and break some others.
Assist trophies in SSBB work fine now, Super Mario Sunshine is a little broken again.
Still needs some more work...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6627 8ced0084-cf51-0410-be5f-012b33b47a6e
skid_au had implemented this in a previous revision and enabled it by default, but it caused glitches if STC wasn't set to "safe" (which kinda defeated the purpose since it slowed down stuff again).
Also renamed the "safe texture cache" to "accurate texture cache", since setting the "safe" texture cache to "safe" sounds kind of silly..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6625 8ced0084-cf51-0410-be5f-012b33b47a6e
j4ck.fr0st