to allow both system-side (also Windows) and per-user installations.
The IPL ROM is another candidate for this, but I don't have an
image to test with.
Perhaps a more general solution would be to just phase out the Sys
directory. As used for data which would have been available in ROM
or flash on the real hardware, it really contains two classes of
files that are both read-only during emulation:
- Settings and font files, which can be freely distributed
- ROM files which must be obtained from the user's own GC or Wii
Since the two could be freely put together on Windows without any
problems and with the users of that platform being resistant to
change, it may be easiest to just treat Sys as another directory
to be copied from the application bundle into User/Sys at startup
on non-Windows.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6738 8ced0084-cf51-0410-be5f-012b33b47a6e
keyword "id" in the public auibar.h header.
You now need at least r66546 of wxWidgets to build on OS X.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6735 8ced0084-cf51-0410-be5f-012b33b47a6e
These files are acquired from the hardware ROM by the individual user,
who does not normally have write access to Sys on Linux and OS X.
If you currently have these files in Sys/GC, just move them to User/GC
(~/Library/Application\ Support/Dolphin/GC on OS X).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6734 8ced0084-cf51-0410-be5f-012b33b47a6e
(acc and ax) and product register with one read/write.
Gives a minuscule speedup of not more than 4%. In exchange, breaks all
your out-of-tree changes to dsp. Tests are not building again, yet.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6680 8ced0084-cf51-0410-be5f-012b33b47a6e
Return values from RunCycles isn't consistent/meaningful at the moment so assuming it runs as many cycles as asked.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6487 8ced0084-cf51-0410-be5f-012b33b47a6e
First: Added a DESTDIR option for package building.
Second: Change the OpenCL setup. On both linux and windows use CLRun. I completely removed the option here. If CLRun works on MacOSX this should be done there as well, and this change implemented in the scons build also. Then we could remove the HAVE_OPENCL and the new USE_CLRUN definitions. Then we will finally have the dynamic detection of opencl set up cross platform.
On a side note, it doesn't seem that the program loaded from TextureDecoder.cl compiles or runs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6366 8ced0084-cf51-0410-be5f-012b33b47a6e
- various fixes for using CMake on Windows
- support building external SDL, zlib, CLRun, wxWidgets
- support using precompiled GLew and WiiUse libs on Windows
For what it's worth, I'm not quite sure if I got all the wx files right...
Building with MSVC2008 still doesn't work yet, but is a lot closer now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6361 8ced0084-cf51-0410-be5f-012b33b47a6e
I am officially killing the local/global build crap. The "local" build thing should never have existed. There is now only one build that is essentially what the "global" build was before. This is the way a proper build system should work. I will soon write a wiki page to describe how to properly use the cmake build system, and how you can still set things up to get the "local" build from before. However, that type of build should be considered a developer tool, and not the way that dolphin-emu should be built.
Briefly, to use cmake now do the following from the toplevel of dolphin's source:
mkdir Builddir
cd Builddir
cmake ..
make
make install (you may need superuser privileges)
Note that the scons build is still building dolphin in the old way.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6341 8ced0084-cf51-0410-be5f-012b33b47a6e
Some notes about this:
- config.h doesn't get written yet, so you'll have to use one generated by SCons
- dependency checking isn't really implemented, yet. Just some basic checks for OpenGL or ALSA, we need something more sophisticated though.
- the OpenGL plugin fails to load for some reason which I can't debug right now due to the libc debuginfo package version in openSUSE not matching the runtime packages
- there's even some support for generating install packages (rpm/deb/.. packages, NSIS installer, etc). It doesn't work properly right now though, since some paths seem to be hardcoded into Dolphin's source
- probably lots of other stuff I forgot... Just take a look at all the TODOs in the CMakeLists.txt files for more information ;P
Additionally, I added various files to the svn:ignore list.
tl;dr: Unless you are a dev or you're building binary packages, this commit shouldn't bother you :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6326 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix modality for the config dialogs on windows.
Fix the compress/decompress dialog wxString issues for MacOSX (hopefully).
Fix the DSP-LLE debugger for linux.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6031 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix an issue that prevented the code window settings from taking effect on application start. (Thanks shuffle2, skid_au, and sanchez).
Fix a potential segmentation fault with the DSP-LLE debugger window.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5988 8ced0084-cf51-0410-be5f-012b33b47a6e
Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
Ideally we should be more character set aware, but at the moment we
use anonymous 7/8-bit strings in too many places.
Fix use of AddGrowable{Col,Row}. Any (non-zero) rows/columns must
have been created first by adding an item to it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5648 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
* Restore Audio Throttle to function properly, broken by Ayuanx many hundreds of revisions back.
* Simplify DSPLLE JIT dispatcher in preparation for an asm rewrite
* Remove hack that made DSPLLE JIT seem faster than it was by running fewer cycles, but resulting in bad sound. This shows off how mysteriously slow it is - I don't understand why it's not faster. Use the DSPLLE interpreter for now if you want to use DSPLLE.
* Made "DSPLLE on Thread" work properly with correct-ish timing - although the speed benefit is really small now.
If it seems like this change slows anything non-LLE down, try turning off Audio Throttle and use the frame limiter in options instead.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5541 8ced0084-cf51-0410-be5f-012b33b47a6e
Soren Jorvang