mirror of https://github.com/bsnes-emu/bsnes.git
199 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
35ff15f83e |
Update to v106r50 release.
byuu says:
Changelog:
- emulator/video,audio: various cleanups
- emulator/audio: removed reverb effect (it breaks very badly on
high-frequency systems)
- emulator/audio: the Nyquist anti-aliasing lowpass filter is now
generated automatically instead of set per-core
- at 44.1KHz output, it's set to 22KHz; at 48KHz, it's set to
22KHz; at 96KHz, it's set to 25KHz
- this filter now takes the bsnes emulation speed setting into
account
- all system/video.cpp files removed; inlined in System::power() and
Interface::set() instead
- sfc/cpu: pre-compute `HTIME` as `HTIME+1<<2` for faster comparisons of
HIRQs
- sfc/cpu: re-add check to block IRQs on the last dot of each frame
(minor speed hit)
- hiro/gtk3: fixed headers for Linux compilation finally
- hiro/gtk,qt: fixed settings.cpp logic so initial values are used
when no settings.bml file exists
- hiro/gtk: started a minor experiment to specify theming information
in settings.bml files
- nall/dsp: allow the precision type (double) to be overridden (to
float)
- nall: add some helpers for generating pre-compiled headers
- it was a failure to try using them for higan, however ...
- nall: add some helpers for reading fallback values from empty
`Markup::Node[search]` statements
Todo:
- CRITICAL: a lot of my IRQ/NMI/HDMA timing tests are failing with the
fast PPU ... need to figure out why
- space between Emulator::video functions and Emulator::audio
functions in gb/system/system.cpp
- remove Audio/Reverb/Enable from settings.bml in target-bsnes
|
|
|
Tim Allen
|
65a3e6c676 |
Update to v106r49 release.
byuu says:
This is a fairly radical WIP with extreme changes to lots of very
important parts.
The result is a ~7% emulation speedup (with bsnes, unsure how much it
helps higan), but it's quite possible there are regressions. As such, I
would really appreciate testing as many games as possible ... especially
the old finnicky games that had issues with DMA and/or interrupts.
One thing to note is that I removed an edge case test that suppresses
IRQs from firing on the very last dot of every field, which is a
behavior I've verified on real hardware in the past. I feel that the
main interrupt polling function (the hottest portion of the entire
emulator) is not the appropriate place for it, and I should instead
factor it into assignment of NMITIMEN/VTIME/HTIME using the new
io.irqEnable (==virqEnable||hirqEnable) flag. But since I haven't done
that yet ... there's an old IRQ test ROM of mine that'll fail for this
WIP. No commercial games will ever rely on this, so it's fine for
testing.
Changelog:
- sfc/cpu.smp: inlined the global status functions
- sfc/cpu: added readRAM, writeRAM to use a function pointer instead
of a lambda for WRAM access
- sfc/cpu,smp,ppu/counter: updated reset functionality to new style
using class inline initializers
- sfc/cpu: fixed power(false) to invoke the reset vector properly
- sfc/cpu: completely rewrote DMA handling to have per-channel
functions
- sfc/cpu: removed unused joylatch(), io.joypadStrobeLatch
- sfc/cpu: cleaned up io.cpp handlers
- sfc/cpu: simplified interrupt polling code using
nall::boolean::flip(),raise(),lower() functions
- sfc/ppu/counter: cleaned up the class significantly and also
optimized things for efficiency
- sfc/ppu/counter: emulated PAL 1368-clock long scanline when
interlace=1, field=1, vcounter=311
- sfc/smp: factored out the I/O and port handlers to io.cpp
|
|
|
Tim Allen
|
393c2395bb |
Update to v106r48 release.
byuu says:
The problems with the Windows and Qt4 ports have all been resolved,
although there's a fairly gross hack on a few Qt widgets to not destruct
once Application::quit() is called to avoid a double free crash (I'm
unsure where Qt is destructing the widgets internally.) The Cocoa port
compiles again at least, though it's bound to have endless problems. I
improved the Label painting in the GTK ports, which fixes the background
color on labels inside TabFrame widgets.
I've optimized the Makefile system even further.
I added a "redo state" command to bsnes, which is created whenever you
load the undo state. There are also hotkeys for both now, although I
don't think they're really something you want to map hotkeys to.
I moved the nall::Locale object inside hiro::Application, so that it can
be used to translate the BrowserDialog and MessageDialog window strings.
I improved the Super Game Boy emulation of `MLT_REQ`, fixing Pokemon
Yellow's custom border and probably more stuff.
Lots of other small fixes and improvements. Things are finally stable
once again after the harrowing layout redesign catastrophe.
Errata:
- ICD::joypID should be set to 3 on reset(). joypWrite() may as well
take uint1 instead of bool.
- hiro/Qt: remove pWindow::setMaximumSize() comment; found a
workaround for it
- nall/GNUmakefile: don't set object.path if it's already set (allow
overrides before including the file)
|
|
|
Tim Allen
|
6090c63958 |
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
|
|
|
Tim Allen
|
0c55796060 |
Update to v106r46 release.
byuu says:
Changelog:
- bsnes, higan: simplified make output; reordered rules
- hiro: added Window::set(Minimum,Maximum)Size() [only implemented in
GTK+ so far]
- bsnes: only allow the window to be shrunk to the 1x multiplier size
- bsnes: refactored Integral Scaling checkbox to {Center, Scale,
Stretch} radio selection
- nall: call fflush() after nall::print() to stdout or stderr [needed
for msys2/bash]
- bsnes, higan: program/interface.cpp renamed to program/platform.cpp
- bsnes: trim ".shader/" from names in Settings→Shader menu
- bsnes: Settings→Shader menu updated on video driver changes
- bsnes: remove missing games from recent files list each time it is
updated
- bsnes: video multiplier menu generated dynamically based on largest
monitor size at program startup
- bsnes: added shrink window and center window function to video
multiplier menu
- bsnes: de-minimize presentation window when exiting fullscreen mode
or changing video multiplier
- bsnes: center the load game dialog against the presentation window
(important for multi-monitor setups)
- bsnes: screenshots are not immediate instead of delayed one frame
- bsnes: added frame advance menu option and hotkey
- bsnes: added enable cheats checkbox and hotkey; can be used to
quickly enable/disable all active cheats
Errata:
- hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`,
`SW_MAXIMIZE`
- hiro/Windows: add pMonitor::workspace()
- hiro/Windows: add setMaximized(), setMinimized() in
pWindow::construct()
- bsnes: call setCentered() after setMaximized(false)
|
|
|
Tim Allen
|
372e9ef42b |
Update to v106r45 release.
byuu says:
Changelog:
- sfc/ppu-fast: added hires mode 7 option (doubles the sampling rate
of mode 7 pixels to reduce aliasing)
- sfc/ppu-fast: fixed mode 7 horizontal screen flip [hex_usr]
- bsnes: added capture screenshot function and path selection
- for now, it saves as BMP. I need a deflate implementation that
won't add an external dependency for PNG
- the output resolution is from the emulator: (256 or 512)x(240 or
480 minus overscan cropping if enabled)
- it captures the NEXT output frame, not the current one ... but
it may be wise to change this behavior
- it'd be a problem if the core were to exit and an image was
captured halfway through frame rendering
- bsnes: recovery state renamed to undo state
- bsnes: added manifest viewer tool
- bsnes: mention if game has been verified or not on the status bar
message at load time
- bsnes, nall: fixed a few missing function return values
[SuperMikeMan]
- bsnes: guard more strongly against failure to load games to avoid
crashes
- hiro, ruby: various fixes for macOS [Sintendo]
- hiro/Windows: paint on `WM_ERASEBKGND` to prevent status bar
flickering at startup
- icarus: SPC7110 heuristics fixes [hex_usr]
Errata:
- sfc/ppu-fast: remove debug hires mode7 force disable comment from
PPU::power()
[The `WM_ERASEBKGND` fix was already present in the 106r44 public
beta -Ed.]
|
|
|
Tim Allen
|
5a8c814e25 |
Update to v106r40 release.
byuu says:
Changelog:
- hiro: added BrowserDialog::openObject() [match file *or* folder
by filters]
- hiro: BrowserDialog accept button is now disabled when it would
otherwise do nothing
- eg openFile without a folder to enter or file to open selected
- eg saveFile without a file name or with a file name that matches
a folder name
- bsnes: added support for gamepaks (game folders)
- bsnes: store all save states inside per-game .bsz (ZIP) archives
instead of .bst/ folders
- this reduces the number of state files from 10+ to 1; without
having folders sort before files
- hiro: both gtk2 and gtk3 now use cairo to render Canvas; supports
sx,sy [BearOso]
- higan, bsnes: fast PPU/DSP are now run-time options instead of
compile-time options
- bsnes: disable fast PPU when loading Air Strike Patrol / Desert
Fighter
- bsnes: disable fast DSP when loading Koushien 2
- bsnes: added options to advanced panel to disable fast PPU and/or
fast DSP
|
|
|
Tim Allen
|
15b67922b3 |
Update to v106r38 release.
byuu says:
Changelog:
- hiro: added Qt5 support
- hiro: added GTK3 support (currently runs very poorly)
- bsnes: number of recent games and quick state slots can be changed
programmatically now
- I may expose this as a configuration file setting, but probably
not within the GUI
- nall: use -Wno-everything when compiling with Clang
- sorry, Clang's meaningless warning messages are just endless ...
|
|
|
Tim Allen
|
ec9729a9e1 |
Update to v106r36 release.
byuu says:
Changelog:
- nall: renamed array to adaptive_array; marked it as deprecated
- nall: created new array class; which is properly static (ala
std::array) with optional bounds-checking
- sfc/ppu-fast: converted unmanaged arrays to use nall/array (no speed
penalty)
- bsnes: rewrote the cheat code editor to a new design
- nall: string class can stringify pointer types directly now, so
pointer() was removed
- nall: added array_view and pointer types (still unsure if/how I'll
use pointer)
|
|
|
Tim Allen
|
5d29700fa1 |
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
|
|
|
Tim Allen
|
685cec6583 |
Update to v106r30 release.
byuu says:
Changelog:
- nall/GNUmakefile: fixed findstring parameter arguments [Screwtape]
- nall/Windows: always include -mthreads -lpthread for all
applications
- nall/memory: code restructuring
I really wanted to work on the new PPU today, but I thought I'd spend a
few minutes making some minor improvements to nall::memory, that was
five and a half hours ago. Now I have a 67KiB diff of changes. Sigh.
|
|
|
Tim Allen
|
2b8df2e70e |
Update to v106r27 release.
byuu says:
Changelog:
- nall: merged Path::config() and Path::local() to Path::userData()
- ~/.local/share or %appdata or ~/Library/ApplicationSupport
- higan, bsnes: render main window icon onto viewport instead of
canvas
- should hopefully fix a brief flickering glitch that appears on
Windows
- icarus: improved Super Famicom heuristics for Starfox / Starwing RAM
- ruby/Direct3D: handle viewport size changes in lock() instead of
output()
- fixes icon disappearing when resizing main window
- hiro/Windows: remove WS_DISABLED from StatusBar to fix window
resize grip
- this is experimental: I initially used WS_DISABLED to work
around a focus bug
- yet trying things now, said bug seems(?) to have gone away at
some point ...
- bsnes: added advanced settings panel with real-time driver change
support
I'd like feedback on the real-time driver change, for possible
consideration into adding this to higan as well.
Some drivers just crash, it's a fact of life. The ASIO driver in
particular likes to crash inside the driver itself, without any error
messages ever returned to try and catch.
When you try to change a driver with a game loaded, it gives you a scary
warning, asking if you want to proceed.
When you change a driver, it sets a crash flag, and if the driver
crashes while initializing, then restarting bsnes will disable the
errant driver. If it fails in a recoverable way, then it sets the driver
to “None” and warns you that the driver cannot be used.
What I'm thinking of further adding is to call emulator→save() to
write out the save RAM contents beforehand (although the periodic
auto-saving RAM will handle this anyway when it's enabled), and possibly
it might be wise to capture an emulator save state, although those can't
be taken without advancing the emulator to the next frame, so that might
not be a good idea.
I'm also thinking we should show some kind of message somewhere when a
driver is set to “None”. The status bar can be hidden, so perhaps on the
title bar? Or maybe just a warning on startup that a driver is set to
“None”.
|
|
|
Tim Allen
|
5961ea9c03 |
Update to v106r26 release.
byuu says:
Changelog:
- nall: added -static-libgcc -static-libstdc++ to Windows/GCC link
flags
- bsnes, higan: added program icons to main window when game isn't
loaded
- bsnes: improved recent games menu sorting
- bsnes: fixed multi-game recent game loading on Windows
- bsnes: completed path override support
- bsnes, higan: added screensaver suppression on Windows
- icarus: add 32K volatile RAM to SuperFX boards that report no RAM
(fixes Starfox)
- bsnes, higan: added automatic dependency generation [Talarubi]
- hiro/GTK: appending actions to menus restores enabled() state
- higan: use board node inside manifest.bml if it exists
- bsnes: added blur emulation and color emulation options to view menu
- ruby: upgraded input.sdl to SDL 2.0 (though it makes no functional
difference sadly)
- ruby: removed video.sdl (due to deprecating SDL 1.2)
- nall, ruby: improvements to HID class (generic vendor and product
IDs)
Errata:
- bsnes, higan: on Windows, Application::Windows::onScreenSaver needs
`[&]` lambda capture, not `[]`
- find it in presentation/presentation.cpp
|
|
|
Tim Allen
|
3353efd3a1 |
Update to v106r25 release.
byuu says:
Changelog:
- bsnes:
- added full input mapping support (multi-mapping, digital+analog
inputs, rumble, hotkeys, etc)
- can now load multi-part games (eg Super Game Boy) from the
command-line
- added recent games menu with list clear function; supports
multi-part games (sorting logic incomplete)
- added automatic binding of gamepads on new configuration files
- added view scaling support with aspect correction, overscan
cropping, and integral scaling modes
- added video shader support
- added status bar (can be hidden)
- added save states (both menu and hotkeys)
- added fullscreen mode support
- added support for loading compressed (ZIP) archives for any
supported media type (SNES, GB, etc)
- added frame counter
- added auto-memory saving
- added pause / block-input modes when main window loses focus
- added --fullscreen command-line option to start bsnes in
fullscreen mode
- added input settings panel
- added hotkeys settings panel
- added path settings panel (paths aren't actually used set, but
can be assigned)
- higan: fixed macOS install rule [Sintendo]
- higan: minor UI code cleanups
- nall: renamed Processor to Architecture to fix macOS builds
[Sintendo]
Yeah, you read right: recent games menu, path settings. And dynamic rate
control + screensaver suppression is on the todo list. I'm not fucking
around this time. I really want to make something special here.
|
|
|
Tim Allen
|
0ea17abfea |
Update to v106r15 release.
byuu says: Changelog: - Super Game Boy: fixed loading of boot ROM - hiro: added ComboEdit::setEditable(bool = true); - tomoko: added new systems settings panel Note!!: this release will not compile on Windows or macOS due to the missing ComboEdit control! I'll try to merge in hex's implementation for the Windows release here soon. macOS users will probably be out of luck for a while, sorry. The new systems panel is an idea I've been meaning to implement for quite a while, but finally got around to starting on it. It's still fairly unpolished, but the basic idea is there for Linux/BSD users to try out now. So imagine the Super Game Boy, BS-X Satellaview, Sufami Turbo, and the associated BS Memory Pack-slotted SNES cartridges. To play any of those, you needed to choose Nintendo→Super Famicom, and then select the relevant cartridge, and then select any slotted cartridges to play with it. This was acceptable-ish, if not ideal. But now imagine in the future if we wanted to support the Famicom Disk System, which is technically a cartridge that plugs into the Famicom deck. Or the PC Engine CD, which has one of three special HuCards that must be inserted (ignoring the Turbo Duo where it's built-in—I'm going to be emulating the Super CD as if you're using a stock PCE CD.) Or the Mega CD, where there are probably a half dozen or more BIOS + hardware revisions that are region-specific, which connect to an expansion port that is identical to the cartridge port save for the Mega Drive seeing an I/O register bit toggled here. In all of these cases, it's going to be a real pain to have to choose the 'BIOS' every time you want to play a game for them. I can't distribute these BIOSes with higan due to copyright restrictions, and trying to ship dummy folders for every possible combination would become quite odious, and difficult for people to use (compare to setting up the Game Boy Advance system BIOS.) And so I've created the new systems settings panel. Here, you can manage a list of systems that show up under the higan library menu (now renamed to “System”), where each entry contains name, boot, and hidden parameters. The name parameter is what shows up in the system menu. You can call any system higan emulates whatever you like here. Don't like “Super Famicom”? Change it to “SNES”, then. The boot parameter is a combo edit with a dropdown for all of the systems higan emulates. If you choose one of these, then the higan system menu option will work exactly like in previous releases, and prompt you for a cartridge. But if you choose the browse button next to the combo edit control, you'll get to pick any gamepak from the higan library of your choosing. So you could choose the SGB2 BIOS, and name the menu option “Super Game Boy 2”, and when you choose the menu option, it will load the SFC core, load the SGB2 BIOS, and only prompt you for the Game Boy game you wish to play on it. The same deal goes for the FDS, PCE-CD, Mega CD, Mega Drive Sonic & Knuckles lock-on cartridge, BS-X Satellaview, SD Gundam G-Next, etc. Whatever you want to be in the menu, you can put in there by pointing higan at the appropriate 'BIOS' gamepak to load. Astute readers have probably already noticed, but you can technically use this on non-slotted games as well, thus creating instant boot options for your absolute favorite games, if you so wanted. Point it at Zelda 3, and you can boot it instantly from the main menu, without any need for file selection. The hidden option is a way to hide the system entries from the system menu. Primarily this would be a fast way for users to disable emulation cores they never use in higan, without having to remove the options. The major concession with this change is the collapsing of the per-manufacturer submenus. What this means is you will now have all twelve higan emulated systems in the main menu by default. This makes the list rather long, but ... oh well. I may try to offer some form of grouping in the future, but the grouping defeats the “list order = display order” design, and I'm not willing to auto-sort the list. I want people to be able to control the ordering of the system menu, and have added (as yet non-functional) sorting arrows for that purpose. I also don't have a combined tree+table view widget in higan to try to and group things. But ... we'll see how things go in the future. Another idea is to add a specialty load option that opens up the user's Emulation library path, and lets you pick a gamepak for any system, which would boot the same way as when you drop a gamepak onto the higan executable or main window. So say you almost never play Wonderswan games, this would be a way to play them without them cluttering your system menu list. The “import ROM files” option has been removed. All it does is launch icarus directly. I would rather users become familiar with using icarus. The “load ROM file” option remains. Anyway, this is all still a work in progress, so please give it time and don't overload me with too many suggested changes right now, thanks :3 |
|
|
Tim Allen
|
8f61c267c5 |
Update to v106r14 release.
byuu says:
Changelog:
- game/memory/type/battery → game/memory/volatile
- (manufacturer.)content.type → (architecture.)content.type
- nall: Markup::find() strips spaces from values in comparisons
- higan: updated game manifest loading/saving code for all cores
- GBA: flash memory ID is internally selected based on the
manufacturer and memory size
- SFC: ST018 (ARM6) frequency can be modified via game manifest now
- WS: EEPROM::name removed (not useful)
- icarus, genius: battery→volatile updates
I did my best to look over the diff between r13 and r14, but it's 84KiB
excluding the game database changes. It's just too much for me. I'd
greatly appreciate if someone could look over it and check for any
errors in this update. But more than likely, I suppose we'll iron out
any issues by determining which games fail to load.
Right now, I know the Super Game Boy support doesn't seem to work. But
all non-SFC cores should work fully, and all normal + NEC DSP SFC games
should work as well. Unsure about the rest.
Also, I'm planning to change the Game Boy “MBC1M” mapper to “MBC1#A” to
indicate it's an alternate wiring configuration of the stock MBC1, and
not a new mapper type.
|
|
|
Tim Allen
|
c38a771f22 |
Update to v106r04 release.
byuu says:
Changelog:
- nall: `Markup::Node::operator[]` now uses `find()` instead of `lookup()`
behind the scenes
- Super Famicom: RAM memory ordering is now independent of ROM memory
ordering
- Super Famicom: added 19 new generic board definitions
- icarus: improved Super Famicom heuristics generation
Not putting it in the changelog, but the SPC7110 RAM now has write
protection disabled again.
99% of games should now be playable with heuristics. The exceptions
should be:
- 4MB LoROM games with SRAM (Ys 3, FE: Thracia 776)
- 2MB DSP LoROM games
- BS-X Town
- BS-X slotted games
- SA1 BSX slotted games
- SPC7110 games without the RTC (Momotarou Dentetsu Happy, Super Power
League 4)
- SPC7110 7MB fan translation (wasn't supported earlier either)
- ExLoROM games (wasn't supported earlier either)
- Sufami Turbo
- Campus Challenge '92 and Powerfest '94
- ST010 is going to run at 15MHz instead of 11MHz
- MSU1 (needs to be supported in higan, not icarus)
I'll add support for most of these before the release of v107.
|
|
|
Tim Allen
|
2f81b5a3e7 |
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
|
|
|
Tim Allen
|
e9d2d56df9 |
Update to v105r1 release.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
|
|
|
Tim Allen
|
6524a7181d |
Update to v104r15 release.
byuu says:
Changelog:
- processor/huc6280,mos6502,wdc65816: replaced abbreviated opcode
names with descriptive names
- nall: replaced `PLATFORM_MACOSX` define with `PLATFORM_MACOS`
- icarus: added `Icarus::missing() -> string_vector` to list missing
appended firmware files by name
- ruby, hiro: fix macosx→macos references
The processor instruction renaming was really about consistency with the
other processor cores. I may still need to do this for one or two more
processors.
The icarus change should allow a future release of the icarus
application to import games with external SNES coprocessor firmware once
again. It will also allow this to be possible when used in library mode.
|
|
|
Tim Allen
|
fbc58c70ae |
Update to v104r14 release.
byuu says:
Changelog:
- Emulator::Interface::videoResolution() -\> VideoResolution renamed
to videoInformation() -\> VideoInformation
- added double VideoInformation::refreshRate
- higan: added `binary := (application|library)` — set this to
`library` to produce a dynamic link library
- higan: removed `-march=native` for macOS application builds; and for
all library builds
- higan: removed `console` build flag; uncomment `link += -mwindows`
instead
- nall/GNUmakefile: `macosx` platform renamed `macos`
- still need to do this for nall/intrinsics.hpp
- Game Gear: return region=NTSC as the only option, so that the system
frequency is always set correctly
- hiro/cocoa: fixed typo [Sintendo]
- hiro/Windows: removed GetDpiForMonitor, as it's Windows 8+ only; DPI
is no longer per-monitor aware
- icarus: core Icarus class now has virtual functions for
directory::create, <file::exists>, <file::copy>, <file::write>
- icarus: Sufami Turbo can import save RAM files now
- icarus: setting `ICARUS_LIBRARY` define will compile icarus without
main(), GUI components
- ruby/video/Direct3D: choose the current monitor instead of top-left
monitor for fullscreen exclusive [Cydrak]
- ruby/video/Direct3D: do not set `WS_EX_TOPMOST` on fullscreen
exclusive window [Cydrak]
- this isn't necessary for exclusive mode, and it just makes
getting out of the application more difficult
|
|
|
Tim Allen
|
1ff315838e |
Update to v104r13 release.
byuu says:
Changelog:
- nall/GNUmakefile: build=release changed to -O2, build=optimize is
now -O3
- hiro: added Monitor::dpi(uint index) → Position [returns logical
DPI for x, y]
- Position is a bad name, but dpi(monitor).(x,y)() make more sense
than .(width,height)()
- hiro: Position, Size, Geometry, Font changed from using signed int
to float
- hiro: Alignment changed from using double to float
- hiro: added skeleton (unused) Application::scale(), setScale()
functions
Errata:
- hiro/cocoa's Monitor::dpi() is untested. Probably will cause issues
with macOS' automatic scaling.
- hiro/gtk lacks a way to get both per-monitor and per-axis (x,y) DPI
scaling
- hiro/qt lacks a way to get per-monitor DPI scaling (Qt 5.x has this,
but I still use Qt 4.x)
- and just to get global DPI, hiro/qt's DPI retrieval has to use
undocumented functions ... fun
The goal with this WIP was basically to prepare hiro for potential
automatic scaling. It'll be extremely difficult, but I'm convinced that
it must be possible if macOS can do it.
By moving from signed integers to floats for coordinates, we can now
scale and unscale without losing precision. That of course isn't the
hard part, though. The hard part is where and how to do the scaling. In
the ideal application, hiro/core and hiro/extension will handle 100% of
this, and the per-platform hiro/(cocoa,gtk,qt,windows) will not be aware
of what's going on, but ... to even make that possible, things will need
to change in every per-platform core, eg the per-platform code will have
to call a core function to change geometry, which will know about the
scaling and unscale the values back down again.
Gonna be a lot of work, but ... it's a start.
|
|
|
Tim Allen
|
4fb8ce2821 |
Update to v104r12 release.
byuu says:
Changelog:
- higan: URLs updated to HTTPS
- sfc/ppu/background: use hires/interlace/mosaic-adjusted X/Y
coordinates for offset-per-tile mode
- sfc/ppu/background: hires mosaic seems to advance pixel counter on
subscreen pixels
- tomoko: added “Help→Credits” menu option (currently the page does
not exist; should before v105)
- tomoko: reduced volume slider from {0% - 500%} to {0% - 200%}.
Distortion is too intense above 200%.
- technically, I've encountered distortion at 200% as well in
Prince of Persia for the SNES
- nall/run/invoke: use program path for working directory
- allows you to choose “Library→Import ROMs” from a different
directory on the command-line
I don't know how to assign credit for the mosaic stuff. It's been a
work-in-progress with me, Cydrak, and hex_usr.
The current design should be correct, but very unpleasant. The code
desperately needs to be refactored, but my recent attempt at doing so
ended in spectacular failure.
|
|
|
Tim Allen
|
366e9cebff |
Update to v104r01 release.
byuu says:
Changelog:
- gba/cpu: synchronize to the PPU, not oneself, when the CPU is
stopped
- this bug was patched in the official v104 release; but not in
the .tar.xz archive
- ms/vdp: backdrop color is on the second 16-entry palette, not the
first [hex\_usr]
- ms/vdp: fix background color 0 priority; fixes Alex Kidd in High
Tech World text boxes [hex\_usr]
- tomoko: choose first option when loading files via the command-line
[hex\_usr]
- icarus: lo/hi RAM addressing was backwards; M68K is big endian;
fixes save files in Sonic 3
Many thanks to hex\_usr for the Master System / Game Gear VDP fix.
That's a tricky system to get good technical information on. The fix
should be correct, but please report if you spot any regressions just in
case.
|
|
|
Tim Allen
|
7022d1aa51 |
Update to v103r23 release.
byuu says:
Changelog:
- gb: added accelerometer X-axis, Y-Axis inputs¹
- gb: added rumble input¹
- gb/mbc5: added rumble support²
- gb/mbc6: added skeleton driver, but it doesn't boot Net de Get
- gb/mbc7: added mostly complete driver (only missing EEPROM), but it
doesn't boot Kirby Tilt 'n' Tumble
- gb/tama: added leap year assignment
- tomoko: fixed macOS compilation [MerryMage]
- hiro/cocoa: fix table cell redrawing on updates and automatic column
resizing [ncbncb]
- hiro/cocoa: fix some weird issue with clicking table view checkboxes
on Retina displays [ncbncb]
- icarus: enhance Game Boy heuristics³
- nall: fix three missing return statements [Jonas Quinn]
- ruby: hopefully fixed all compilation errors reported by Screwtape
et al⁴
¹: because there's no concept of a controller for cartridge inputs,
I'm attaching to the base platform for now. An idea I had was to make
separate ports for each cartridge type ... but this would duplicate the
rumble input between MBC5 and MBC7. And would also be less discoverable.
But it would be more clean in that users wouldn't think the Game Boy
hardware had this functionality. I'll think about it.
²: it probably won't work yet. Rumble isn't documented anywhere, but
I dug through an emulator named GEST and discovered that it seems to use
bit 3 of the RAM bank select to be rumble. I don't know if it sets the
bit for rumbling, then clears when finished, or if it sets it and then
after a few milliseconds it stops rumbling. I couldn't test on my
FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist
on FreeBSD, and nobody has ever posted any working code for how to use
evdev (or whatever it's called) on FreeBSD.
³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since
it's not really static RAM.
⁴: if possible, please test all drivers if you can. I want to ensure
they're all working. Especially let me know if the following work:
macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao)
If I can confirm these are working, I'm going to then remove them from
being included with stock higan builds.
I'm also considering dropping SDL video on Linux/BSD. XShm is much
faster and supports blurring. I may also drop SDL input on Linux, since
udev works better. That will free a dependency on SDL 1.2 for building
higan. FreeBSD is still going to need it for joypad support, however.
|
|
|
Tim Allen
|
17697317d4 |
Update to v103r14 release.
byuu says:
Changelog:
- tomoko: by popular choice, default to adaptive mode on new installs
- hiro/windows: fix bug that was preventing the escape key from
closing some dialog windows
- nall/registry: use "\\\\" as separator instead of "/" ... because
some registry keys contain "/" in them >_>
- ruby: add ASIO driver stub (so far it can only initialize and grab
the driver name/version information)
|
|
|
Tim Allen
|
ed5ec58595 |
Update to v103r13 release.
byuu says:
Changelog:
- gb/interface: fix Game Boy Color extension to be "gbc" and not "gb"
[hex\_usr]
- ms/interface: move Master System hardware controls below controller
ports
- sfc/ppu: improve latching behavior of BGnHOFS registers (not
hardware verified) [AWJ]
- tomoko/input: rework port/device mapping to support non-sequential
ports and devices¹
- todo: should add move() to inputDevice.mappings.append and
inputPort.devices.append
- note: there's a weird GCC 4.9 bug with brace initialization of
InputEmulator; have to assign each field separately
- tomoko: all windows sans the main presentation window can be
dismissed with the escape key
- icarus: the single file selection dialog ("Load ROM Image...") can
be dismissed with the escape key
- tomoko: do not pause emulation when FocusLoss/Pause is set during
exclusive fullscreen mode
- hiro/(windows,gtk,qt): implemented Window::setDismissable() function
(missing from cocoa port, sorry)
- nall/string: fixed printing of largest possible negative numbers (eg
`INT_MIN`) [Sintendo]
- only took eight months! :D
¹: When I tried to move the Master System hardware port below the
controller ports, I ran into a world of pain.
The input settings list expects every item in the
`InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be
populated with valid results. But these would be sparsely populated
based on the port and device IDs from inside higan. And that is done so
that the Interface::inputPoll can have O(1) lookup of ports and devices.
This worked because all the port and device IDs were sequential (they
left no gaps in the maps upon creating the lists.)
Unfortunately by changing the expectation of port ID to how it appears
in the list, inputs would not poll correctly. By leaving them alone and
just moving Hardware to the third position, the Game Gear would be
missing port IDs of 0 and 1 (the controller ports of the Master System).
Even by trying to make separate MasterSystemHardware and
GameGearHardware ports, things still fractured when the devices were no
longer contigious.
I got pretty sick of this and just decided to give up on O(1)
port/device lookup, and moved to O(n) lookup. It only knocked the
framerate down by maybe one frame per second, enough to be in the margin
of error. Inputs aren't polled *that* often for loops that usually
terminate after 1-2 cycles to be too detrimental to performance.
So the new input system now allows non-sequential port and device IDs.
Remember that I killed input IDs a while back. There's never any reason
for those to need IDs ... it was easier to just order the inputs in the
order you want to see them in the user interface. So the input lookup is
still O(1). Only now, everything's safer and I return a
maybe<InputMapping&>, and won't crash out the program trying to use a
mapping that isn't found for some reason.
Errata: the escape key isn't working on the browser/message dialogs on
Windows, because of course nothing can ever just be easy and work for
me. If anyone else wouldn't mind looking into that, I'd greatly
appreciate it.
Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it
seems to not respond to the escape key on modal dialogs. If I put the
`WM_KEYDOWN` test in the main window proc, then it doesn't seem to get
called for `VK_ESCAPE` at all, and doesn't get called period for modal
windows. So I'm at a loss and it's past 4AM here >_>
|
|
|
Tim Allen
|
ecc7e899e0 |
Update to v103r01 release.
byuu says:
Changelog:
- nall/dsp: improve one pole coefficient calculations [Fatbag]
- higan/audio: reworked filters to support selection of either one
pole (first-order) or biquad (second-order) filters
- note: the design is not stable yet; so forks should not put too
much effort into synchronizing with this change yet
- fc: added first-order filters as per NESdev wiki (90hz lowpass +
440hz lowpass + 14khz highpass)
- fc: created separate NTSC-J and NTSC-U regions
- NESdev wiki says the Japanese Famicom uses a separate audio
filtering strategy, but details are fuzzy
- there's also cartridge audio output being disabled on NES units;
and differences with controllers
- this stuff will be supported in the future, just adding the
support for it now
- gba: corrected serious bugs in PSG wave channel emulation [Cydrak]
- note that if there are still bugs here, it's my fault
- md/psg,ym2612: added first-order low-pass 2840hz filter to match
VA3-VA6 Mega Drives
- md/psg: lowered volume relative to the YM2612
- using 0x1400; multiple people agreed it was the closest to the
hardware recordings against a VA6
- ms,md/psg: don't serialize the volume levels array
- md/vdp: Hblank bit acts the same during Vblank as outside of it (it
isn't always set during Vblank)
- md/vdp: return isPAL in bit 0 of control port reads
- tomoko: change command-line option separator from : to |
- [Editor's note: This change was present in the public v103,
but it's in this changelog because it was made after the v103 WIP]
- higan/all: change the 20hz high-pass filters from second-order
three-pass to first-order one-pass
- these filters are meant to remove DC bias, but I honestly can't
hear a difference with or without them
- so there's really no sense wasting CPU power with an extremely
powerful filter here
Things I did not do:
- change icarus install rule
- work on 8-bit Mega Drive SRAM
- work on Famicom or Mega Drive region detection heuristics in icarus
My long-term dream plan is to devise a special user-configurable
filtering system where you can set relative volumes and create your own
list of filters (any number of them in any order at any frequency), that
way people can make the systems sound however they want.
Right now, the sanest place to put this information is inside the
$system.sys/manifest.bml files. But that's not very user friendly, and
upgrading to new versions will lose these changes if you don't copy them
over manually. Of course, cluttering the GUI with a fancy filter editor
is probably supreme overkill for 99% of users, so maybe that's fine.
|
|
|
Tim Allen
|
8af3e4a6e2 |
Update to v102r22 release.
byuu says:
Changelog:
- higan: Emulator::Interface::videoSize() renamed to videoResolution()
- higan: Emulator::Interface::rtcsync() renamed to rtcSynchronize()
- higan: added video display rotation support to Video
- GBA: substantially improved audio mixing
- fixed bug with FIFO 50%/100% volume setting
- now properly using SOUNDBIAS amplitude to control output
frequencies
- reduced quantization noise
- corrected relative volumes between PSG and FIFO channels
- both PSG and FIFO values cached based on amplitude; resulting in
cleaner PCM samples
- treating PSG volume=3 as 200% volume instead of 0% volume now
(unverified: to match mGBA)
- GBA: properly initialize ALL CPU state; including the vital
prefetch.wait=1 (fixes Classic NES series games)
- GBA: added video rotation with automatic key translation support
- PCE: reduced output resolution scalar from 285x242 to 285x240
- the extra two scanlines won't be visible on most TVs; and they
make all other cores look worse
- this is because all other cores output at 240p or less; so they
were all receiving black bars in windowed mode
- tomoko: added "Rotate Display" hotkey setting
- tomoko: changed hotkey multi-key logic to OR instead of AND
- left support for flipping it back inside the core; for those so
inclined; by uncommenting one line in input.hpp
- tomoko: when choosing Settings→Configuration, it will
automatically select the currently loaded system
- for instance, if you're playing a Game Gear game, it'll take you
to the Game Gear input settings
- if no games are loaded, it will take you to the hotkeys panel
instead
- WS(C): merged "Hardware-Vertical", "Hardware-Horizontal" controls
into combined "Hardware"
- WS(C): converted rotation support from being inside the core to
using Emulator::Video
- this lets WS(C) video content scale larger now that it's not
bounded by a 224x224 square box
- WS(C): added automatic key rotation support
- WS(C): removed emulator "Rotate" key (use the general hotkey
instead; I recommend F8 for this)
- nall: added serializer support for nall::Boolean (boolean) types
- although I will probably prefer the usage of uint1 in most cases
|
|
|
Tim Allen
|
a4629e1f64 |
Update to v102r21 release.
byuu says:
Changelog:
- GBA: fixed WININ2 reads, BG3PB writes [Jonas Quinn]
- R65816: added support for yielding/resuming from WAI/STP¹
- SFC: removed status.dmaCounter functionality (also fixes possible
TAS desync issue)
- tomoko: added support for combinatorial inputs [hex\_usr\]²
- nall: fixed missing return value from Arithmetic::operator--
[Hendricks266]
Now would be the time to start looking for major regressions with the
new GBA PPU renderer, I suppose ...
¹: this doesn't matter for the master thread (SNES CPU), but is
important for slave threads (SNES SA1). If you try to save a state and
the SA1 is inside of a WAI instruction, it will get stuck there forever.
This was causing attempts to create a save state in Super Bomberman
- Panic Bomber W to deadlock the emulator and crash it. This is now
finally fixed.
Note that I still need to implement similar functionality into the Mega
Drive 68K and Z80 cores. They still have the possibility of deadlocking.
The SNES implementation was more a dry-run test for this new
functionality. This possible crashing bug in the Mega Drive core is the
major blocking bug for a new official release.
²: many, many thanks to hex\_usr for coming up with a really nice
design. I mostly implemented it the exact same way, but with a few tiny
differences that don't really matter (display " and ", " or " instead of
" & ", " | " in the input settings windows; append → bind;
assignmentName changed to displayName.)
The actual functionality is identical to the old higan v094 and earlier
builds. Emulated digital inputs let you combine multiple possible keys
to trigger the buttons. This is OR logic, so you can map to eg
keyboard.up OR gamepad.up for instance. Emulated analog inputs always
sum together. Emulated rumble outputs will cause all mapped devices to
rumble, which is probably not at all useful but whatever. Hotkeys use
AND logic, so you have to press every key mapped to trigger them. Useful
for eg Ctrl+F to trigger fullscreen.
Obviously, there are cases where OR logic would be nice for hotkeys,
too. Eg if you want both F11 and your gamepad's guide button to trigger
the fullscreen toggle. Unfortunately, this isn't supported, and likely
won't ever be in tomoko. Something I might consider is a throw switch in
the configuration file to swap between AND or OR logic for hotkeys, but
I'm not going to allow construction of mappings like "(Keyboard.Ctrl and
Keyboard.F) or Gamepad.Guide", as that's just too complicated to code,
and too complicated to make a nice GUI to set up the mappings for.
|
|
|
Tim Allen
|
3bcf3c24c9 |
Update to v102r20 release.
byuu says:
Changelog:
- nall: `#undef OUT` on Windows platform
- GBA: add missing CPU prefetch state to serialization (this was
breaking serialization in games using ROM prefetch)
- GBA: reset all PPU data in the power() function (some things were
missing before, causing issues on reset)
- GBA: restored horizontal mosaic emulation to the new pixel-based
renderer
- GBA: fixed tilemap background horizontal flipping (Legend of Spyro -
warning screen)
- GBA: fixed d8 bits of scroll registers (ATV - Thunder Ridge Racers -
menu screen)
- SFC: DRAM refresh ticks the ALU MUL/DIV registers five steps forward
[reported by kevtris]
- SFC: merged dmaCounter and autoJoypadCounter into new shared
clockCounter
- left stub for old dmaCounter so that I can do some traces to
ensure the new code's 100% identical
GBA save states would have been broken since whenever I emulated ROM
prefetch. I guess not many people are using the GBA core ...
|
|
|
Tim Allen
|
1ca4609079 |
Update to v102r18 release.
byuu says:
This WIP fixes all the critical pending issues I had open. I'm sure
there's many more that simply didn't make their way into said list. So
by all means, please report important issues you're aware of so they can
get fixed.
Changelog:
- ruby: add variable texture support to GDI video driver [bug
reported by Cydrak]
- ruby: minor cleanups to XShm video driver
- ruby: fix handling of up+down, left+right hat cases for XInput
driver [bug reported by Cydrak]
- nall: fixed vector class so that compilation with GCC 7.1 should
succeed [SuperMikeMan]
- sfc: initialize most DSP registers to random values to fix Magical
Drop [Jonas Quinn]
- sfc: lower PPU brightness when luma=0 from 50% scale to 25% scale;
helps scenes like Final Fantasy III's intro
|
|
|
Tim Allen
|
7e7003fd29 |
Update to v102r15 release.
byuu says:
Changelog:
- nall: added DSP::IIR::OnePole (which is a first-order IIR filter)
- FC/APU: removed strong highpass, weak hipass filters (and the
dummied out lowpass filter)
- MS,GG,MD/PSG: removed lowpass filter
- MS,GG,MD/PSG: audio was not being centered properly; removed
centering for now
- MD/YM2612: fixed clipping of accumulator from 18 signed bits to 14
signed bits (-0x2000 to +0x1fff) [Cydrak]
- MD/YM2612: removed lowpass filter
- PCE/PSG: audio was not being centered properly; removed centering
for now
First thing is that I've removed all of the ad-hoc audio filtering.
Emulator::Stream intrinsically provides a three-pass, second-order
biquad IIR butterworth lowpass filter that clips frequencies above 20KHz
with very good attenuation (as good as IIR gets, anyway.)
It doesn't really make sense to have the various cores running
additional lowpass filters. If we want to filter frequencies below
20KHz, then I can adapt Emulator::Audio::createStream() to take a cutoff
frequency value, and we can do it all at once, with much better quality.
Right now, I don't know what frequencies are best to cut off the various
other audio cores, so they're just gone for now.
As for the highpass filters for the Famicom core, well ... you don't get
aliasing from resampling low frequencies. And generally speaking, too
low a frequency will be inaudible anyway. All these were doing was
killing possible bass (if they were too strong.) We can add them again,
but only if someone can convert Ryphecha's ad-hoc magic integers into a
frequency cutoff. In which case, I'll use my biquad IIR filter to do it
even better. On this note, it may prove useful to do this for the MD PSG
as well, to try and head off unnecessary clamping when mixing with the
YM2612.
Finally, there was the audio centering issue that affected the
MS,GG,MD,PCE,SG cores. It was flooring the "silent" audio level, which
was resulting in extremely heavy distortion if you tried listening to
higan and, say, audacious at the same time. Without the botched
centering, this distortion is completely gone now.
However, without any centering, we've halved the potential volume range.
This means the audio slider in higan's audio settings panel will start
clamping twice as quickly. So ultimately, we need to figure out how to
fix the centering. This isn't as simple as just subtracting less. We
will probably have to center every individual audio channel before
summing them to do this properly.
Results:
On the Mega Drive, Altered Beast sounds quite a bit better, a lot less
distortion now. But it's still not perfect, especially sound effects.
Further, Bare Knuckle / Streets of Rage still has really bad sound
effects. It looks like I broke something in Cydrak's code when trying to
adapt it to my style =(
|
|
|
Tim Allen
|
4c3f9b93e7 |
Update to v102r12 release.
byuu says:
Changelog:
- MD/PSG: fixed 68K bus Z80 status read address location
- MS, GG, MD/PSG: channels post-decrement their counters, not
pre-decrement [Cydrak]¹
- MD/VDP: cache screen width registers once per scanline; screen
height registers once per frame
- MD/VDP: support 256-width display mode (used in Shining Force, etc)
- MD/YM2612: implemented timers²
- MD/YM2612: implemented 8-bit PCM DAC²
- 68000: TRAP instruction should index the vector location by 32 (eg
by 128 bytes), fixes Shining Force
- nall: updated hex(), octal(), binary() functions to take uintmax
instead of template<typename T> parameter³
¹: this one makes an incredible difference. Sie noticed that lots of
games set a period of 0, which would end up being a really long period
with pre-decrement. By fixing this, noise shows up in many more games,
and sounds way better in games even where it did before. You can hear
extra sound on Lunar - Sanposuru Gakuen's title screen, the noise in
Sonic The Hedgehog (Mega Drive) sounds better, etc.
²: this also really helps sound. The timers allow PSG music to play
back at the correct speed instead of playing back way too quickly. And
the PCM DAC lets you hear a lot of drum effects, as well as the
"Sega!!" sound at the start of Sonic the Hedgehog, and the infamous,
"Rise from your grave!" line from Altered Beast.
Still, most music on the Mega Drive comes from the FM channels, so
there's still not a whole lot to listen to.
I didn't implement Cydrak's $02c test register just yet. Sie wasn't 100%
certain on how the extended DAC bit worked, so I'd like to play it a
little conservative and get sound working, then I'll go back and add a
toggle or something to enable undocumented registers, that way we can
use that to detect any potential problems they might be causing.
³: unfortunately we lose support for using hex() on nall/arithmetic
types. If I have a const Pair& version of the function, then the
compiler gets confused on whether Natural<32> should use uintmax or
const Pair&, because compilers are stupid, and you can't have explicit
arguments in overloaded functions. So even though either function would
work, it just decides to error out instead >_>
This is actually really annoying, because I want hex() to be useful for
printing out nall/crypto keys and hashes directly.
But ... this change had to be made. Negative signed integers would crash
programs, and that was taking out my 68000 disassembler.
|
|
|
Tim Allen
|
fa6cbac251 |
Update to v102r06 release.
byuu says:
Changelog:
- added higan/emulator/platform.hpp (moved out Emulator::Platform from
emulator/interface.hpp)
- moved gmake build paramter to nall/GNUmakefile; both higan and
icarus use it now
- added build=profile mode
- MD: added the region select I/O register
- MD: started to add region selection support internally (still no
external select or PAL support)
- PCE: added cycle stealing when reading/writing to the VDC or VCE;
and when using ST# instructions
- PCE: cleaned up PSG to match the behavior of Mednafen (doesn't
improve sound at all ;_;)
- note: need to remove loadWaveSample, loadWavePeriod
- HuC6280: ADC/SBC decimal mode consumes an extra cycle; does not set
V flag
- HuC6280: block transfer instructions were taking one cycle too many
- icarus: added code to strip out PC Engine ROM headers
- hiro: added options support to BrowserDialog
The last one sure ended in failure. The plan was to put a region
dropdown directly onto hiro::BrowserDialog, and I had all the code for
it working. But I forgot one important detail: the system loads
cartridges AFTER powering on, so even though I could technically change
the system region post-boot, I'd rather not do so.
So that means we have to know what region we want before we even select
a game. Shit.
|
|
|
Tim Allen
|
c40e9754bc |
Update to v102r01 release.
byuu says:
Changelog:
- MS, MD, PCE: remove controllers from scheduler in destructor
[hex_usr]
- PCE: no controller should return all bits set (still causing errant
key presses when swapping gamepads)
- PCE: emulate MDR for hardware I/O $0800-$17ff
- PCE: change video resolution to 1140x242
- PCE: added tertiary background Vscroll register (secondary cache)
- PCE: create classes out of VDC VRAM, SATB, CRAM for cleaner access
and I/O registers
- PCE: high bits of CRAM read should be set
- PCE: partially emulated VCE display registers: color frequency, HDS,
HDW, VDS, VDW
- PCE: 32-width sprites now split to two 16-width sprites to handle
overflow properly
- PCE: hopefully emulated sprite zero hit correctly (it's not well
documented, and not often used)
- PCE: trigger line coincidence interrupts during the previous
scanline's Hblank period
- tomoko: raise viewport from 320x240 to 326x242 to accommodate PC
Engine's max resolution
- nall: workaround for Clang compilation bug that can't figure out
that a char is an integral data type
|
|
|
Tim Allen
|
5bdf55f08f |
Update to v101r25 release.
byuu says: Changelog: - SMS: emulated VDP mode 4 graphical output (background, sprites) - added $(windres) to icarus as well I'm sure the VDP emulation is still really, really buggy, but essentially I handle: - mode 4 rendering - background scrolling - background hscroll lock - background vscroll lock - background nametable relocation - sprite nametable relocation - sprite tiledata relocation - sprite 192-line y=0xd0 edge case (end sprite rendering) - sprite 8-pixel x-coordinate displacement - sprite extended size (height only in mode 4) - sprite overflow - sprite collision - left column masking - display disable - backdrop color - 192, 224, 240 height I do not support: - mode 2 rendering - sprite zoom - disallowing 240 height in NTSC mode - PAL mode - probably lots more |
|
|
Tim Allen
|
bab2ac812a |
Update to v101r24 release.
byuu says:
Changelog:
- SMS: extended bus mapping of in/out ports: now decoding them fully
inside ms/bus
- SMS: moved Z80 disassembly code from processor/z80 to ms/cpu
(cosmetic)
- SMS: hooked up non-functional silent PSG sample generation, so I can
cap the framerate at 60fps
- SMS: hooked up the VDP main loop: 684 clocks/scanline, 262
scanlines/frame (no PAL support yet)
- SMS: emulated the VDP Vcounter and Hcounter polling ... hopefully
it's right, as it's very bizarre
- SMS: emulated VDP in/out ports (data read, data write, status read,
control write, register write)
- SMS: decoding and caching all VDP register flags (variable names
will probably change)
- nall: \#undef IN on Windows port (prevent compilation warning on
processor/z80)
Watching Sonic the Hedgehog, I can definitely see some VDP register
writes going through, which is a good sign.
Probably the big thing that's needed before I can get enough into the
VDP to start showing graphics is interrupt support. And interrupts are
never fun to figure out :/
What really sucks on this front is I'm flying blind on the Z80 CPU core.
Without a working VDP, I can't run any Z80 test ROMs to look for CPU
bugs. And the CPU is certainly too buggy still to run said test ROM
anyway. I can't find any SMS emulators with trace logging from reset.
Such logs vastly accelerate tracking down CPU logic bugs, so without
them, it's going to take a lot longer.
|
|
|
Tim Allen
|
f3e67da937 |
Update to v101r19 release.
byuu says:
Changelog:
- added \~130 new PAL games to icarus (courtesy of Smarthuman
and aquaman)
- added all three Korean-localized games to icarus
- sfc: removed SuperDisc emulation (it was going nowhere)
- sfc: fixed MSU1 regression where the play/repeat flags were not
being cleared on track select
- nall: cryptography support added; will be used to sign future
databases (validation will always be optional)
- minor shims to fix compilation issues due to nall changes
The real magic is that we now have 25-30% of the PAL SNES library in
icarus!
Signing will be tricky. Obviously if I put the public key inside the
higan archive, then all anyone has to do is change that public key for
their own releases. And if you download from my site (which is now over
HTTPS), then you don't need the signing to verify integrity. I may just
put the public key on my site on my site and leave it at that, we'll
see.
|
|
|
Tim Allen
|
c6fc15f8d2 |
Update to v101r18 release.
byuu says: Changelog: - added 30 new PAL games to icarus (courtesy of Mikerochip) - new version of libco no longer requires mprotect nor W|X permissions - nall: default C compiler to -std=c11 instead of -std=c99 - nall: use `-fno-strict-aliasing` during compilation - updated nall/certificates (hopefully for the last time) - updated nall/http to newer coding conventions - nall: improve handling of range() function I didn't really work on higan at all, this is mostly just a release because lots of other things have changed. The most interesting is `-fno-strict-aliasing` ... basically, it joins `-fwrapv` as being "stop the GCC developers from doing *really* evil shit that could lead to security vulnerabilities or instabilities." For the most part, it's a ~2% speed penalty for higan. Except for the Sega Genesis, where it's a ~10% speedup. I have no idea how that's possible, but clearly something's going very wrong with strict aliasing on the Genesis core. So ... it is what it is. If you need the performance for the non-Genesis cores, you can turn it off in your builds. But I'm getting quite sick of C++'s "surprises" and clever compiler developers, so I'm keeping it on in all of my software going forward. |
|
|
Tim Allen
|
4c3f58150c |
Update to v101r15 release.
byuu says:
Changelog:
- added (poorly-named) castable<To, With> template
- Z80 debugger rewritten to make declaring instructions much simpler
- Z80 has more instructions implemented; supports displacement on
(IX), (IY) now
- added `Processor::M68K::Bus` to mirror `Processor::Z80::Bus`
- it does add a pointer indirection; so I'm not sure if I want to
do this for all of my emulator cores ...
|
|
|
Tim Allen
|
d91f3999cc |
Update to v101r14 release.
byuu says:
Changelog:
- rewrote the Z80 core to properly handle 0xDD (IX0 and 0xFD (IY)
prefixes
- added Processor::Z80::Bus as a new type of abstraction
- all of the instructions implemented have their proper T-cycle counts
now
- added nall/certificates for my public keys
The goal of `Processor::Z80::Bus` is to simulate the opcode fetches being
2-read + 2-wait states; operand+regular reads/writes being 3-read. For
now, this puts the cycle counts inside the CPU core. At the moment, I
can't think of any CPU core where this wouldn't be appropriate. But it's
certainly possible that such a case exists. So this may not be the
perfect solution.
The reason for having it be a subclass of Processor::Z80 instead of
virtual functions for the MasterSystem::CPU core to define is due to
naming conflicts. I wanted the core to say `in(addr)` and have it take
the four clocks. But I also wanted a version of the function that didn't
consume time when called. One way to do that would be for the core to
call `Z80::in(addr)`, which then calls the regular `in(addr)` that goes to
`MasterSystem::CPU::in(addr)`. But I don't want to put the `Z80::`
prefix on all of the opcodes. Very easy to forget it, and then end up not
consuming any time. Another is to use uglier names in the
`MasterSystem::CPU` core, like `read_`, `write_`, `in_`, `out_`, etc. But,
yuck.
So ... yeah, this is an experiment. We'll see how it goes.
|
|
|
Tim Allen
|
043f6a8b33 |
Update to v101r08 release.
byuu says:
Changelog:
- 68K: fixed read-modify-write instructions
- 68K: fixed ADDX bug (using wrong target)
- 68K: fixed major bug with SUB using wrong argument ordering
- 68K: fixed sign extension when reading address registers from
effective addressing
- 68K: fixed sign extension on CMPA, SUBA instructions
- VDP: improved OAM sprite attribute table caching behavior
- VDP: improved DMA fill operation behavior
- added Master System / Game Gear stubs (needed for developing the Z80
core)
|
|
|
Tim Allen
|
ffd150735b |
Update to v101r07 release.
byuu says: Added VDP sprite rendering. Can't get any games far enough in to see if it actually works. So in other words, it doesn't work at all and is 100% completely broken. Also added 68K exceptions and interrupts. So far only the VDP interrupt is present. It definitely seems to be firing in commercial games, so that's promising. But the implementation is almost certainly completely wrong. There is fuck all of nothing for documentation on how interrupts actually work. I had to find out the interrupt vector numbers from reading the comments from the Sonic the Hedgehog disassembly. I have literally no fucking clue what I0-I2 (3-bit integer priority value in the status register) is supposed to do. I know that Vblank=6, Hblank=4, Ext(gamepad)=2. I know that at reset, SR.I=7. I don't know if I'm supposed to block interrupts when I is >, >=, <, <= to the interrupt level. I don't know what level CPU exceptions are supposed to be. Also implemented VDP regular DMA. No idea if it works correctly since none of the commercial games run far enough to use it. So again, it's horribly broken for usre. Also improved VDP fill mode. But I don't understand how it takes byte-lengths when the bus is 16-bit. The transfer times indicate it's actually transferring at the same speed as the 68K->VDP copy, strongly suggesting it's actually doing 16-bit transfers at a time. In which case, what happens when you set an odd transfer length? Also, both DMA modes can now target VRAM, VSRAM, CRAM. Supposedly there's all kinds of weird shit going on when you target VSRAM, CRAM with VDP fill/copy modes, but whatever. Get to that later. Also implemented a very lazy preliminary wait mechanism to to stall out a processor while another processor exerts control over the bus. This one's going to be a major work in progress. For one, it totally breaks the model I use to do save states with libco. For another, I don't know if a 68K->VDP DMA instantly locks the CPU, or if it the CPU could actually keep running if it was executing out of RAM when it started the DMA transfer from ROM (eg it's a bus busy stall, not a hard chip stall.) That'll greatly change how I handle the waiting. Also, the OSS driver now supports Audio::Latency. Sound should be even lower latency now. On FreeBSD when set to 0ms, it's absolutely incredible. Cannot detect latency whatsoever. The Mario jump sound seems to happen at the very instant I hear my cherry blue keyswitch activate. |
|
|
Tim Allen
|
ac2d0ba1cf |
Update to v101r05 release.
byuu says:
Changelog:
- 68K: fixed bug that affected BSR return address
- VDP: added very preliminary emulation of planes A, B, W (W is
entirely broken though)
- VDP: added command/address stuff so you can write to VRAM, CRAM,
VSRAM
- VDP: added VRAM fill DMA
I would be really surprised if any commercial games showed anything at
all, so I'd probably recommend against wasting your time trying, unless
you're really bored :P
Also, I wanted to add: I am accepting patches\! So if anyone wants to
look over the 68K core for bugs, that would save me untold amounts of
time in the near future :D
|
|
|
Tim Allen
|
1df2549d18 |
Update to v101r04 release.
byuu says:
Changelog:
- pulled the (u)intN type aliases into higan instead of leaving them
in nall
- added 68K LINEA, LINEF hooks for illegal instructions
- filled the rest of the 68K lambda table with generic instance of
ILLEGAL
- completed the 68K disassembler effective addressing modes
- still unsure whether I should use An to decode absolute
addresses or not
- pro: way easier to read where accesses are taking place
- con: requires An to be valid; so as a disassembler it does a
poor job
- making it optional: too much work; ick
- added I/O decoding for the VDP command-port registers
- added skeleton timing to all five processor cores
- output at 1280x480 (needed for mixed 256/320 widths; and to handle
interlace modes)
The VDP, PSG, Z80, YM2612 are all stepping one clock at a time and
syncing; which is the pathological worst case for libco. But they also
have no logic inside of them. With all the above, I'm averaging around
250fps with just the 68K core actually functional, and the VDP doing a
dumb "draw white pixels" loop. Still way too early to tell how this
emulator is going to perform.
Also, the 320x240 mode of the Genesis means that we don't need an aspect
correction ratio. But we do need to ensure the output window is a
multiple 320x240 so that the scale values work correctly. I was
hard-coding aspect correction to stretch the window an additional \*8/7.
But that won't work anymore so ... the main higan window is now 640x480,
960x720, or 1280x960. Toggling aspect correction only changes the video
width inside the window.
It's a bit jarring ... the window is a lot wider, more black space now
for most modes. But for now, it is what it is.
|
|
|
Tim Allen
|
0a57cac70c |
Update to v101r02 release.
byuu says:
Changelog:
- Emulator: use `(uintmax)-1 >> 1` for the units of time
- MD: implemented 13 new 68K instructions (basically all of the
remaining easy ones); 21 remain
- nall: replaced `(u)intmax_t` (64-bit) with *actual* `(u)intmax` type
(128-bit where available)
- this extends to everything: atoi, string, etc. You can even
print 128-bit variables if you like
22,552 opcodes still don't exist in the 68K map. Looking like quite a
few entries will be blank once I finish.
|
|
|
Tim Allen
|
e39987a3e3 |
Update to v101 release.
byuu says (in the public announcement):
Not a large changelog this time, sorry. This release is mostly to fix
the SA-1 issue, and to get some real-world testing of the new scheduler
model. Most of the work in the past month has gone into writing a 68000
CPU core; yet it's still only about half-way finished.
Changelog (since the previous release):
- fixed SNES SA-1 IRQ regression (fixes Super Mario RPG level-up
screen)
- new scheduler for all emulator cores (precision of 2^-127)
- icarus database adds nine new SNES games
- added Input/Frequency to settings file (allows simulation of
latency)
byuu says (in the WIP forum):
Changelog:
- in 32-bit mode, Thread uses uint64\_t with 2^-63 time units (10^-7
precision in the worst case)
- nearly ten times the precision of an attosecond
- in 64-bit mode, Thread uses uint128\_t with 2^-127 time units
(10^-26 precision in the worst case)
- far more accurate than yoctoseconds; almost closing in on planck
time
Note: a quartz crystal is accurate to 10^-4 or 10^-5. A cesium fountain
atomic clock is accurate to 10^-15. So ... yeah. 2^-63 was perfectly
fine; but there was no speed penalty whatsoever for using uint128\_t in
64-bit mode, so why not?
|
|
|
Tim Allen
|
f5e5bf1772 |
Update to v100r16 release.
byuu says: (Windows users may need to include <sys/time.h> at the top of nall/chrono.hpp, not sure.) Unchangelog: - forgot to add the Scheduler clock=0 fix because I have the memory of a goldfish Changelog: - new icarus database with nine additional games - hiro(GTK,Qt) won't constantly write its settings.bml file to disk anymore - added latency simulator for fun (settings.bml => Input/Latency in milliseconds) So the last one ... I wanted to test out nall::chrono, and I was also thinking that by polling every emulated frame, it's pretty wasteful when you are using Fast Forward and hitting 200+fps. As I've said before, calls to ruby::input::poll are not cheap. So to get around this, I added a limiter so that if you called the hardware poll function within N milliseconds, it'll return without doing any actual work. And indeed, that increases my framerate of Zelda 3 uncapped from 133fps to 142fps. Yay. But it's not a "real" speedup, as it only helps you when you exceed 100% speed (theoretically, you'd need to crack 300% speed since the game itself will poll at 16ms at 100% speed, but yet it sped up Zelda 3, so who am I to complain?) I threw the latency value into the settings file. It should be 16, but I set it to 5 since that was the lowest before it started negatively impacting uncapped speeds. You're wasting your time and CPU cycles setting it lower than 5, but if people like placebo effects it might work. Maybe I should let it be a signed integer so people can set it to -16 and think it's actually faster :P (I'm only joking. I took out the 96000hz audio placebo effect as well. Not really into psychological tricks anymore.) But yeah seriously, I didn't do this to start this discussion again for the billionth time. Please don't go there. And please don't tell me this WIP has higher/lower latency than before. I don't want to hear it. The only reason I bring it up is for the fun part that is worth discussing: put up or shut up time on how sensitive you are to latency! You can set the value above 5 to see how games feel. I personally can't really tell a difference until about 50. And I can't be 100% confident it's worse until about 75. But ... when I set it to 150, games become "extra difficult" ... the higher it goes, the worse it gets :D For this WIP, I've left no upper limit cap. I'll probably set a cap of something like 500ms or 1000ms for the official release. Need to balance user error/trolling with enjoyability. I'll think about it. [...] Now, what I worry about is stupid people seeing it and thinking it's an "added latency" setting, as if anyone would intentionally make things worse by default. This is a limiter. So if 5ms have passed since the game last polled, and that will be the case 99.9% of the time in games, the next poll will happen just in time, immediately when the game polls the inputs. Thus, a value below 1/<framerate>ms is not only pointless, if you go too low it will ruin your fast forward max speeds. I did say I didn't want to resort to placebo tricks, but I also don't want to spark up public discussion on this again either. So it might be best to default Input/Latency to 0ms, and internally have a max(5, latency) wrapper around the value. |
|
|
Tim Allen
|
c50723ef61 |
Update to v100r15 release.
byuu wrote: Aforementioned scheduler changes added. Longer explanation of why here: http://hastebin.com/raw/toxedenece Again, we really need to test this as thoroughly as possible for regressions :/ This is a really major change that affects absolutely everything: all emulation cores, all coprocessors, etc. Also added ADDX and SUB to the 68K core, which brings us just barely above 50% of the instruction encoding space completed. [Editor's note: The "aformentioned scheduler changes" were described in a previous forum post: Unfortunately, 64-bits just wasn't enough precision (we were getting misalignments ~230 times a second on 21/24MHz clocks), so I had to move to 128-bit counters. This of course doesn't exist on 32-bit architectures (and probably not on all 64-bit ones either), so for now ... higan's only going to compile on 64-bit machines until we figure something out. Maybe we offer a "lower precision" fallback for machines that lack uint128_t or something. Using the booth algorithm would be way too slow. Anyway, the precision is now 2^-96, which is roughly 10^-29. That puts us far beyond the yoctosecond. Suck it, MAME :P I'm jokingly referring to it as the byuusecond. The other 32-bits of precision allows a 1Hz clock to run up to one full second before all clocks need to be normalized to prevent overflow. I fixed a serious wobbling issue where I was using clock > other.clock for synchronization instead of clock >= other.clock; and also another aliasing issue when two threads share a common frequency, but don't run in lock-step. The latter I don't even fully understand, but I did observe it in testing. nall/serialization.hpp has been extended to support 128-bit integers, but without explicitly naming them (yay generic code), so nall will still compile on 32-bit platforms for all other applications. Speed is basically a wash now. FC's a bit slower, SFC's a bit faster. The "longer explanation" in the linked hastebin is: Okay, so the idea is that we can have an arbitrary number of oscillators. Take the SNES: - CPU/PPU clock = 21477272.727272hz - SMP/DSP clock = 24576000hz - Cartridge DSP1 clock = 8000000hz - Cartridge MSU1 clock = 44100hz - Controller Port 1 modem controller clock = 57600hz - Controller Port 2 barcode battler clock = 115200hz - Expansion Port exercise bike clock = 192000hz Is this a pathological case? Of course it is, but it's possible. The first four do exist in the wild already: see Rockman X2 MSU1 patch. Manifest files with higan let you specify any frequency you want for any component. The old trick higan used was to hold an int64 counter for each thread:thread synchronization, and adjust it like so: - if thread A steps X clocks; then clock += X * threadB.frequency - if clock >= 0; switch to threadB - if thread B steps X clocks; then clock -= X * threadA.frequency - if clock < 0; switch to threadA But there are also system configurations where one processor has to synchronize with more than one other processor. Take the Genesis: - the 68K has to sync with the Z80 and PSG and YM2612 and VDP - the Z80 has to sync with the 68K and PSG and YM2612 - the PSG has to sync with the 68K and Z80 and YM2612 Now I could do this by having an int64 clock value for every association. But these clock values would have to be outside the individual Thread class objects, and we would have to update every relationship's clock value. So the 68K would have to update the Z80, PSG, YM2612 and VDP clocks. That's four expensive 64-bit multiply-adds per clock step event instead of one. As such, we have to account for both possibilities. The only way to do this is with a single time base. We do this like so: - setup: scalar = timeBase / frequency - step: clock += scalar * clocks Once per second, we look at every thread, find the smallest clock value. Then subtract that value from all threads. This prevents the clock counters from overflowing. Unfortunately, these oscillator values are psychotic, unpredictable, and often times repeating fractions. Even with a timeBase of 1,000,000,000,000,000,000 (one attosecond); we get rounding errors every ~16,300 synchronizations. Specifically, this happens with a CPU running at 21477273hz (rounded) and SMP running at 24576000hz. That may be good enough for most emulators, but ... you know how I am. Plus, even at the attosecond level, we're really pushing against the limits of 64-bit integers. Given the reciprocal inverse, a frequency of 1Hz (which does exist in higan!) would have a scalar that consumes 1/18th of the entire range of a uint64 on every single step. Yes, I could raise the frequency, and then step by that amount, I know. But I don't want to have weird gotchas like that in the scheduler core. Until I increase the accuracy to about 100 times greater than a yoctosecond, the rounding errors are too great. And since the only choice above 64-bit values is 128-bit values; we might as well use all the extra headroom. 2^-96 as a timebase gives me the ability to have both a 1Hz and 4GHz clock; and run them both for a full second; before an overflow event would occur. Another hastebin includes demonstration code: #include <libco/libco.h> #include <nall/nall.hpp> using namespace nall; // cothread_t mainThread = nullptr; const uint iterations = 100'000'000; const uint cpuFreq = 21477272.727272 + 0.5; const uint smpFreq = 24576000.000000 + 0.5; const uint cpuStep = 4; const uint smpStep = 5; // struct ThreadA { cothread_t handle = nullptr; uint64 frequency = 0; int64 clock = 0; auto create(auto (*entrypoint)() -> void, uint frequency) { this->handle = co_create(65536, entrypoint); this->frequency = frequency; this->clock = 0; } }; struct CPUA : ThreadA { static auto Enter() -> void; auto main() -> void; CPUA() { create(&CPUA::Enter, cpuFreq); } } cpuA; struct SMPA : ThreadA { static auto Enter() -> void; auto main() -> void; SMPA() { create(&SMPA::Enter, smpFreq); } } smpA; uint8 queueA[iterations]; uint offsetA; cothread_t resumeA = cpuA.handle; auto EnterA() -> void { offsetA = 0; co_switch(resumeA); } auto QueueA(uint value) -> void { queueA[offsetA++] = value; if(offsetA >= iterations) { resumeA = co_active(); co_switch(mainThread); } } auto CPUA::Enter() -> void { while(true) cpuA.main(); } auto CPUA::main() -> void { QueueA(1); smpA.clock -= cpuStep * smpA.frequency; if(smpA.clock < 0) co_switch(smpA.handle); } auto SMPA::Enter() -> void { while(true) smpA.main(); } auto SMPA::main() -> void { QueueA(2); smpA.clock += smpStep * cpuA.frequency; if(smpA.clock >= 0) co_switch(cpuA.handle); } // struct ThreadB { cothread_t handle = nullptr; uint128_t scalar = 0; uint128_t clock = 0; auto print128(uint128_t value) { string s; while(value) { s.append((char)('0' + value % 10)); value /= 10; } s.reverse(); print(s, "\n"); } //femtosecond (10^15) = 16306 //attosecond (10^18) = 688838 //zeptosecond (10^21) = 13712691 //yoctosecond (10^24) = 13712691 (hitting a dead-end on a rounding error causing a wobble) //byuusecond? ( 2^96) = (perfect? 79,228 times more precise than a yoctosecond) auto create(auto (*entrypoint)() -> void, uint128_t frequency) { this->handle = co_create(65536, entrypoint); uint128_t unitOfTime = 1; //for(uint n : range(29)) unitOfTime *= 10; unitOfTime <<= 96; //2^96 time units ... this->scalar = unitOfTime / frequency; print128(this->scalar); this->clock = 0; } auto step(uint128_t clocks) -> void { clock += clocks * scalar; } auto synchronize(ThreadB& thread) -> void { if(clock >= thread.clock) co_switch(thread.handle); } }; struct CPUB : ThreadB { static auto Enter() -> void; auto main() -> void; CPUB() { create(&CPUB::Enter, cpuFreq); } } cpuB; struct SMPB : ThreadB { static auto Enter() -> void; auto main() -> void; SMPB() { create(&SMPB::Enter, smpFreq); clock = 1; } } smpB; auto correct() -> void { auto minimum = min(cpuB.clock, smpB.clock); cpuB.clock -= minimum; smpB.clock -= minimum; } uint8 queueB[iterations]; uint offsetB; cothread_t resumeB = cpuB.handle; auto EnterB() -> void { correct(); offsetB = 0; co_switch(resumeB); } auto QueueB(uint value) -> void { queueB[offsetB++] = value; if(offsetB >= iterations) { resumeB = co_active(); co_switch(mainThread); } } auto CPUB::Enter() -> void { while(true) cpuB.main(); } auto CPUB::main() -> void { QueueB(1); step(cpuStep); synchronize(smpB); } auto SMPB::Enter() -> void { while(true) smpB.main(); } auto SMPB::main() -> void { QueueB(2); step(smpStep); synchronize(cpuB); } // #include <nall/main.hpp> auto nall::main(string_vector) -> void { mainThread = co_active(); uint masterCounter = 0; while(true) { print(masterCounter++, " ...\n"); auto A = clock(); EnterA(); auto B = clock(); print((double)(B - A) / CLOCKS_PER_SEC, "s\n"); auto C = clock(); EnterB(); auto D = clock(); print((double)(D - C) / CLOCKS_PER_SEC, "s\n"); for(uint n : range(iterations)) { if(queueA[n] != queueB[n]) return print("fail at ", n, "\n"); } } } ...and that's everything.] |
|
|
Tim Allen
|
ca277cd5e8 |
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
|
|
|
Tim Allen
|
92fe5b0813 |
Update to v100r08 release.
byuu says:
Six and a half hours this time ... one new opcode, and all old opcodes
now in a deprecated format. Hooray, progress!
For building the table, I've decided to move from:
for(uint opcode : range(65536)) {
if(match(...)) bind(opNAME, ...);
}
To instead having separate for loops for each supported opcode. This
lets me specialize parts I want with templates.
And to this aim, I'm moving to replace all of the
(read,write)(size, ...) functions with (read,write)<Size>(...) functions.
This will amount to the ~70ish instructions being triplicated ot ~210ish
instructions; but I think this is really important.
When I was getting into flag calculations, a ton of conditionals
were needed to mask sizes to byte/word/long. There was also lots of
conditionals in all the memory access handlers.
The template code is ugly, but we eliminate a huge amount of branch
conditions this way.
|
|
|
Tim Allen
|
059347e575 |
Update to v100r07 release.
byuu says: Four and a half hours of work and ... zero new opcodes implemented. This was the best job I could do refining the effective address computations. Should have all twelve 68000 modes implemented now. Still have a billion questions about when and how I'm supposed to perform certain edge case operations, though. |
|
|
Tim Allen
|
b72f35a13e |
Update to v100r05 release.
byuu says: Alright, I'm definitely going to need to find some people willing to tolerate my questions on this chip, so I'm going to go ahead and announce I'm working on this I guess. This core is way too big for a surprise like the NES and WS cores were. It'll probably even span multiple v10x releases before it's even ready. |
|
|
Tim Allen
|
13ad9644a2 |
Update to v099r16 release (public beta).
byuu says: Changelog: - hiro: BrowserDialog can navigate up to drive selection on Windows - nall: (file,path,dir,base,prefix,suffix)name => Location::(file,path,dir,base,prefix,suffix) - higan/tomoko: rename audio filter label from "Sinc" to "IIR - Biquad" - higan/tomoko: allow loading files via icarus on the command-line once again - higan/tomoko: (begrudging) quick hack to fix presentation window focus on startup - higan/audio: don't divide output audio volume by number of streams - processor/r65816: fix a regression in (read,write)DB; fixes Taz-Mania - fixed compilation regressions on Windows and Linux I'm happy with where we are at with code cleanups and stability, so I'd like to release v100. But even though I'm not assigning any special significance to this version, we should probably test it more thoroughly first. |
|
|
Tim Allen
|
8d5cc0c35e |
Update to v099r15 release.
byuu says:
Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
- but they're now optimized to the realities of the PPU (16-bit data
sizes / no address parameter / where appropriate)
- basically used to get the active-display overrides in a unified place;
but also reduces duplicate code in (read,write)IO
|
|
|
Tim Allen
|
82293c95ae |
Update to v099r14 release.
byuu says:
Changelog:
- (u)int(max,ptr) abbreviations removed; use _t suffix now [didn't feel
like they were contributing enough to be worth it]
- cleaned up nall::integer,natural,real functionality
- toInteger, toNatural, toReal for parsing strings to numbers
- fromInteger, fromNatural, fromReal for creating strings from numbers
- (string,Markup::Node,SQL-based-classes)::(integer,natural,real)
left unchanged
- template<typename T> numeral(T value, long padding, char padchar)
-> string for print() formatting
- deduces integer,natural,real based on T ... cast the value if you
want to override
- there still exists binary,octal,hex,pointer for explicit print()
formatting
- lstring -> string_vector [but using lstring = string_vector; is
declared]
- would be nice to remove the using lstring eventually ... but that'd
probably require 10,000 lines of changes >_>
- format -> string_format [no using here; format was too ambiguous]
- using integer = Integer<sizeof(int)*8>; and using natural =
Natural<sizeof(uint)*8>; declared
- for consistency with boolean. These three are meant for creating
zero-initialized values implicitly (various uses)
- R65816::io() -> idle() and SPC700::io() -> idle() [more clear; frees
up struct IO {} io; naming]
- SFC CPU, PPU, SMP use struct IO {} io; over struct (Status,Registers) {}
(status,registers); now
- still some CPU::Status status values ... they didn't really fit into
IO functionality ... will have to think about this more
- SFC CPU, PPU, SMP now use step() exclusively instead of addClocks()
calling into step()
- SFC CPU joypad1_bits, joypad2_bits were unused; killed them
- SFC PPU CGRAM moved into PPU::Screen; since nothing else uses it
- SFC PPU OAM moved into PPU::Object; since nothing else uses it
- the raw uint8[544] array is gone. OAM::read() constructs values from
the OAM::Object[512] table now
- this avoids having to determine how we want to sub-divide the two
OAM memory sections
- this also eliminates the OAM::synchronize() functionality
- probably more I'm forgetting
The FPS fluctuations are driving me insane. This WIP went from 128fps to
137fps. Settled on 133.5fps for the final build. But nothing I changed
should have affected performance at all. This level of fluctuation makes
it damn near impossible to know whether I'm speeding things up or slowing
things down with changes.
|
|
|
Tim Allen
|
7a68059f78 |
Update to v099r12 release.
byuu says: Changelog: - fixed FC AxROM / VRC7 regression - BitField split to BooleanBitField/NaturalBitField (in preparation for IntegerBitField) - BitFieldReference removed - GB CPU cleaned up - GB Cartridge + Mappers cleaned up - SFC CGRAM is now emulated as uint15[256] instead of uint[512] - sfc/ppu/memory.cpp no longer needed; removed - purged SFC Debugger hooks for now (some of the operator[] calls were bypassing them anyway) Unfortunately, for reasons that defy all semblance of logic, the CGRAM change caused a slight speed hit. As have the last few changes. We're now down to around 129.5fps compared to 123.fps for v099 and 134.5fps at our peak (v099r01-r02). I really like the style I came up with for the Game Boy mappers to settle the purpose(ROM,RAM) vs (rom,ram)Purpose naming convention. If I ever get around to redoing the NES mappers, that's likely the approach I'll take. |
|
|
Tim Allen
|
3e807946b8 |
Update to v099r11 release.
byuu says: Changelog: - NES PPU core updated to use BitFields (absolutely massive improvement in code readability) - NES APU core updated to new coding style - NES cartridge/board and cartridge/chip updated to new coding style - pushed NES PPU rendering one dot forward (doesn't fix King's Quest V yet, sadly) - fixed SNES PPU BG tilemask for 128KiB VRAM mode (doesn't fix Yoshi's Island, though) So ... I kind of went overboard with the fc/cartridge changes. This WIP diff is 185KiB >_> I didn't realize it was going to be as big a task as it was, but once I started everything broke in a chain reaction, so I had to do it all at once. There's a massive chance we've broken a bunch of NES things. Any typos in this WIP are going to be absolutely insidious to track down =( But ... supposing I pulled it off, this means the Famicom core is now fully converted to the new coding style as well. That leaves only the GB and GBA cores. Once those are finished, then we'll finally be free of these gigantic hellspawn diffs. |
|
|
Tim Allen
|
3a9c7c6843 |
Update to v099r09 release.
byuu says:
Changelog:
- Emulator::Interface::Medium::bootable removed
- Emulator::Interface::load(bool required) argument removed
[File::Required makes no sense on a folder]
- Super Famicom.sys now has user-configurable properties (CPU,PPU1,PPU2
version; PPU1 VRAM size, Region override)
- old nall/property removed completely
- volatile flags supported on coprocessor RAM files now (still not in
icarus, though)
- (hopefully) fixed SNES Multitap support (needs testing)
- fixed an OAM tiledata range clipping limit in 128KiB VRAM mode (doesn't
fix Yoshi's Island, sadly)
- (hopefully, again) fixed the input polling bug hex_usr reported
- re-added dialog box for when File::Required files are missing
- really cool: if you're missing a boot ROM, BIOS ROM, or IPL ROM,
it warns you immediately
- you don't have to select a game before seeing the error message
anymore
- fixed cheats.bml load/save location
|
|
|
Tim Allen
|
ccd8878d75 |
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
|
|
|
Tim Allen
|
875f031182 |
Update to v099r06 release.
byuu says: Changelog: - Super Famicom core converted to use nall/vfs - excludes Super Game Boy; since that's invoked from inside the GB core This was definitely the major obstacle to test nall/vfs' applicability. Things worked out pretty great in the end. We went from 22.0KiB (cartridge) + 18.6KiB (interface) to 24.5KiB (cartridge) + 11.4KiB (interface). Or 40.7KiB to 36.0KiB. This removes a very large source of indirection. Before it was: "coprocessor <=> cartridge <=> interface" for loading and saving data, and now it's just "coprocessor <=> cartridge". And it may make sense to eventually turn this into just "cartridge -> coprocessor" by making each coprocessor class handle its own markup parsing. It's nice to have all the manifest parsing in one location (well, sans MSU1); but it's also nice for loading/unloading to be handled by each coprocessor itself. So I'll have to think longer about that one. I've also started handling Interface::save() differently. Instead of keeping track of memory IDs and filenames, and iterating through that vector of objects ... instead I now have a system that mirrors the markup parsing on loading, but handles saving instead. This was actually the reason the code size savings weren't more significant, but I like this style more. As before, it removes an extra level of indirection. So ... next up, I need to port over the GB, then GBA, then WS cores. These shouldn't take too long since they're all very simple with just ROM+RAM(+RTC) right now. Then get the SGB callbacks using vfs. Then after that, gut all the old stream stuff from nall and higan. Kill the (load,save)Request stuff, rename the load(Gamepak)Request to something simpler, and then we should be good. Anyway ... these are some huge changes. |
|
|
Tim Allen
|
f04d9d58f5 |
Update to v099r05 release.
byuu says: Changelog: - added nall/vfs - converted Famicom core to use nall/vfs interface instead of nall/stream interface |
|
|
Tim Allen
|
44a8c5a2b4 |
Update to v099r03 release.
byuu says: Changelog: - finished cleaning up the SFC core to my new coding conventions - removed sfc/controller/usart (superseded by 21fx) - hid Synchronize Video option from the menu (still in the configuration file) Pretty much the only minor detail left is some variable names in the SA-1 core that really won't look good at all if I move to camelCase, so I'll have to rethink how I handle those. It's probably a good area to attempt using BitFields, to see how it impacts performance. But I'll do that in a test branch first. But for the most part, this should be the end of the gigantic diffs (this one was 174KiB), at least for the SFC/WS cores. Still have the FC/GB/GBA cores to clean up more fully. Assuming we don't spot any new regressions, we should be ~95% out of the woods on code cleanups breaking things. |
|
|
Tim Allen
|
ae5b4c3bb3 |
Update to v099r01 release.
byuu says: Changelog: - massive cleanups and optimizations on the PPU core - ~9% speedup over v099 official This is pretty much it for the low-hanging fruit of speeding up higan. Any more gains from this point will be extremely hard-fought, unfortunately. |
|
|
Tim Allen
|
50420e3dd2 |
Update to v098r19 release.
byuu says:
Changelog:
- added nall/bit-field.hpp
- updated all CPU cores (sans LR35902 due to some complexities) to use
BitFields instead of bools
- updated as many CPU cores as I could to use BitFields instead of union {
struct { uint8_t ... }; }; pairs
The speed changes are mostly a wash for this. In some instances,
I noticed a ~2-3% speedup (eg SNES emulation), and in others a 2-3%
slowdown (eg Famicom emulation.) It's within the margin of error, so
it's safe to say it has no impact.
This does give us a lot of new useful things, however:
- no more manual reconstruction of flag values from lots of left shifts
and ORs
- no more manual deconstruction of flag values from lots of ANDs
- ability to get completely free aliases to flag groups (eg GSU can
provide alt2, alt1 and also alt (which is alt2,alt1 combined)
- removes the need for the nasty order_lsbN macro hack (eventually will
make higan 100% endian independent)
- saves us from insane compilers that try and do nasty things with
alignment on union-structs
- saves us from insane compilers that try to store bit-field bits in
reverse order
- will allow some really novel new use cases (I'm planning an
instant-decode ARM opcode function, for instance.)
- reduces code size (we can serialize flag registers in one line instead
of one for each flag)
However, I probably won't use it for super critical code that's constantly
reading out register values (eg PPU MMIO registers.) I think there we
would end up with a performance penalty.
|
|
|
Tim Allen
|
b08449215a |
Update to v098r18 release.
byuu says:
Changelog:
- hiro: fixed the BrowserDialog column resizing when navigating to new
folders (prevents clipping of filenames)
- note: this is kind of a quick-fix; but I have a good idea how to do
the proper fix now
- nall: added BitField<T, Lo, Hi> class
- note: not yet working on the SFC CPU class; need to go at it with
a debugger to find out what's happening
- GB: emulated DMG/SGB STAT IRQ bug; fixes Zerd no Densetsu and Road Rash
(won't fix anything else; don't get hopes up)
|
|
|
Tim Allen
|
20ac95ee49 |
Update to v098r15 release.
byuu says: Changelog: - removed template usage from processor/spc700; cleaned up many function names and the switch table - object size: 176.8kb => 127.3kb - source code size: 43.5kb => 37.0kb - fixed processor/r65816 BRK/COP vector regression [hex_usr] - corrected HuC3 unmapped RAM read value; fixes Robopon [endrift] - cosmetic: simplified the butterworth constant calculation [Wolfram|Alpha] The SPC700 core changes took forever, about three hours of work. Only the LR35902 and R6502 still need their template functions removed. The point of this is that it doesn't cause any speed penalty to do so, and it results in smaller binary sizes and faster compilation times. |
|
|
Tim Allen
|
fdc41611cf |
Update to v098r14 release.
byuu says:
Changelog:
- improved attenuation of biquad filter by computing butterworth Q
coefficients correctly (instead of using the same constant)
- adding 1e-25 to each input sample into the biquad filters to try and
prevent denormalization
- updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb
happen in floating-point mode now
- good amount of work to make the base Emulator::Audio support any number
of output channels
- so that we don't have to do separate work on left/right channels;
and can instead share the code for each channel
- Emulator::Interface::audioSample(int16 left, int16 right); changed to:
- Emulator::Interface::audioSample(double* samples, uint channels);
- samples are normalized [-1.0 to +1.0]
- for now at least, channels will be the value given to
Emulator::Audio::reset()
- fixed GUI crash on startup when audio driver is set to None
I'm probably going to be updating ruby to accept normalized doubles as
well; but I'm not sure if I will try and support anything other 2-channel
audio output. It'll depend on how easy it is to do so; perhaps it'll be
a per-driver setting.
The denormalization thing is fierce. If that happens, it drops the
emulator framerate from 220fps to about 20fps for Game Boy emulation. And
that happens basically whenever audio output is silent. I'm probably
also going to make a nall/denormal.hpp file at some point with
platform-specific functionality to set the CPU state to "denormals as
zero" where applicable. I'll still add the 1e-25 offset (inaudible)
as another fallback.
|
|
|
Tim Allen
|
839813d0f1 |
Update to v098r13 release.
byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/ |
|
|
Tim Allen
|
ae5d380d06 |
Update to v098r11 release.
byuu says:
Changelog:
- fixed nall/path.hpp compilation issue
- fixed ruby/audio/xaudio header declaration compilation issue (again)
- cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the
file was whitespace overkill)
- added null terminator entry to nall/windows/utf8.hpp argc[] array
- nall/windows/guid.hpp uses the Windows API for generating the GUID
- this should stop all the bug reports where two nall users were
generating GUIDs at the exact same second
- fixed hiro/cocoa compilation issue with uint# types
- fixed major higan/sfc Super Game Boy audio latency issue
- fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions
- major cleanups to higan/processor/r65816 core
- merged emulation/native-mode opcodes
- use camel-case naming on memory.hpp functions
- simplify address masking code for memory.hpp functions
- simplify a few opcodes themselves (avoid redundant copies, etc)
- rename regs.* to r.* to match modern convention of other CPU cores
- removed device.order<> concept from Emulator::Interface
- cores will now do the translation to make the job of the UI easier
- fixed plurality naming of arrays in Emulator::Interface
- example: emulator.ports[p].devices[d].inputs[i]
- example: vector<Medium> media
- probably more surprises
Major show-stoppers to the next official release:
- we need to work on GB core improvements: LY=153/0 case, multiple STAT
IRQs case, GBC audio output regs, etc.
- we need to re-add software cursors for light guns (Super Scope,
Justifier)
- after the above, we need to fix the turbo button for the Super Scope
I really have no idea how I want to implement the light guns. Ideally,
we'd want it in higan/video, so we can support the NES Zapper with the
same code. But this isn't going to be easy, because only the SNES knows
when its output is interlaced, and its resolutions can vary as
{256,512}x{224,240,448,480} which requires pixel doubling that was
hard-coded to the SNES-specific behavior, but isn't appropriate to be
exposed in higan/video.
|
|
|
Tim Allen
|
3ebc77c148 |
Update to v098r10 release.
byuu says: Changelog: - synchronized tomoko, loki, icarus with extensive changes to nall (118KiB diff) |
|
|
Tim Allen
|
6ae0abe3d3 |
Update to v098r09 release.
byuu says: Changelog: - fixed major nall/vector/prepend bug - renamed hiro/ListView to hiro/TableView - added new hiro/ListView control which is a simplified abstraction of hiro/TableView - updated higan's cheat database window and icarus' scan dialog to use the new ListView control - compilation works once again on all platforms (Windows, Cocoa, GTK, Qt) - the loki skeleton compiles once again (removed nall/DSP references; updated port/device ID names) Small catch: need to capture layout resize events internally in Windows to call resizeColumns. For now, just resize the icarus window to get it to use the full window width for list view items. |
|
|
Tim Allen
|
0955295475 |
Update to v098r08 release.
byuu says: Changelog: - nall/vector rewritten from scratch - higan/audio uses nall/vector instead of raw pointers - higan/sfc/coprocessor/sdd1 updated with new research information - ruby/video/glx and ruby/video/glx2: fuck salt glXSwapIntervalEXT! The big change here is definitely nall/vector. The Windows, OS X and Qt ports won't compile until you change some first/last strings to left/right, but GTK will compile. I'd be really grateful if anyone could stress-test nall/vector. Pretty much everything I do relies on this class. If we introduce a bug, the worst case scenario is my entire SFC game dump database gets corrupted, or the byuu.org server gets compromised. So it's really critical that we test the hell out of this right now. The S-DD1 changes mean you need to update your installation of icarus again. Also, even though the Lunar FMV never really worked on the accuracy core anyway (it didn't initialize the PPU properly), it really won't work now that we emulate the hard-limit of 16MiB for S-DD1 games. |
|
|
Tim Allen
|
1929ad47d2 |
Update to v098r03 release.
byuu says:
It took several hours, but I've rebuilt much of the SNES' bus memory
mapping architecture.
The new design unifies the cartridge string-based mapping
("00-3f,80-bf:8000-ffff") and internal bus.map calls. The map() function
now has an accompanying unmap() function, and instead of a fixed 256
callbacks, it'll scan to find the first available slot. unmap() will
free slots up when zero addresses reference a given slot.
The controllers and expansion port are now both entirely dynamic.
Instead of load/unload/power/reset, they only have the constructor
(power/reset/load) and destructor (unload). What this means is you can
now dynamically change even expansion port devices after the system is
loaded.
Note that this is incredibly dangerous and stupid, but ... oh well. The
whole point of this was for 21fx. There's no way to change the expansion
port device prior to loading a game, but if the 21fx isn't active, then
the reset vector hijack won't work. Now you can load a 21fx game, change
the expansion port device, and simply reset the system to active the
device.
The unification of design between controller port devices and expansion
port devices is nice, and overall this results in a reduction of code
(all of the Mapping stuff in Cartridge is gone, replaced with direct bus
mapping.) And there's always the potential to expand this system more in
the future now.
The big missing feature right now is the ability to push/pop mappings.
So if you look at how the 21fx does the reset vector, you might vomit
a little bit. But ... it works.
Also changed exit(0) to _exit(0) in the POSIX version of nall::execute.
[The _exit(0) thing is an attempt to make higan not crash when it tries
to launch icarus and it's not on $PATH. The theory is that higan forks,
then the child tries to exec icarus and fails, so it exits, all the
unique_ptrs clean up their resources and tell the X server to free
things the parent process is still using. Calling _exit() prevents
destructors from running, and seems to prevent the problem. -Ed.]
|
|
|
Tim Allen
|
19e1d89f00 |
Update to v098r01 release.
byuu says:
Changelog:
- SFC: balanced profile removed
- SFC: performance profile removed
- SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed
- SFC: Coprocessor, Controller (and expansion port) shared Thread code
merged to SFC::Cothread
- Cothread here just means "Thread with CPU affinity" (couldn't think
of a better name, sorry)
- SFC: CPU now has vector<Thread*> coprocessors, peripherals;
- this is the beginning of work to allow expansion port devices to be
dynamically changed at run-time
- ruby: all audio drivers default to 48000hz instead of 22050hz now if
no frequency is assigned
- note: the WASAPI driver can default to whatever the native frequency
is; doesn't have to be 48000hz
- tomoko: removed the ability to change the frequency from the UI (but
it will display the frequency used)
- tomoko: removed the timing settings panel
- the goal is to work toward smooth video via adaptive sync
- the model is broken by not being in control of the audio frequency
anyway
- it's further broken by PAL running at 50hz and WSC running at 75hz
- it was always broken anyway by SNES interlace timing varying from
progressive timing
- higan: audio/ stub created (for now, it's just nall/dsp/ moved here
and included as a header)
- higan: video/ stub created
- higan/GNUmakefile: now includes build rules for essential components
(libco, emulator, audio, video)
The audio changes are in preparation to merge wareya's awesome WASAPI
work without the need for the nall/dsp resampler.
|
|
|
Tim Allen
|
7dc62e3a69 |
Update to v097r19 release.
byuu says:
Changelog:
- fixed nall/windows/guard.hpp
- fixed hiro/(windows,gtk)/header.hpp
- fixed Famicom PPU OAM reads (mask the correct bits when writing)
[hex_usr]
- removed the need for (system := system) lines from higan/GNUmakefile
- added "All" option to filetype dropdown for ROM loading
- allows loading GBC games in SGB mode (and technically non-GB(C)
games, which will obviously fail to do anything)
- loki can load and play game folders now (command-line only) (extremely
unimpressive; don't waste your time :P)
- the input is extremely hacked in as a quick placeholder; not sure
how I'm going to do mapping yet for it
|
|
|
Tim Allen
|
fc7d5991ce |
Update to v097r18 release.
byuu says:
Changelog:
- fixed SNES sprite priority regression from r17
- added nall/windows/guard.hpp to guard against global namespace
pollution (similar to nall/xorg/guard.hpp)
- almost fixed Windows compilation (still accuracy profile only, sorry)
- finished porting all of gba/ppu's registers over to the new .bit,.bits
format ... all GBA registers.cpp files gone now
- the "processors :=" line in the target-$(ui)/GNUmakefile is no longer
required
- processors += added to each emulator core
- duplicates are removed using the new nall/GNUmakefile's $(unique)
function
- SFC core can be compiled without the GB core now
- "-DSFC_SUPERGAMEBOY" is required to build in SGB support now (it's
set in target-tomoko/GNUmakefile)
- started once again on loki (higan/target-loki/) [as before, loki is
Linux/BSD only on account of needing hiro::Console]
loki shouldn't be too horrendous ... I hope. I just have the base
skeleton ready for now. But the code from v094r08 should be mostly
copyable over to it. It's just that it's about 50KiB of incredibly
tricky code that has to be just perfect, so it's not going to be quick.
But at least with the skeleton, it'll be a lot easier to pick away at it
as I want.
Windows compilation fix: move hiro/windows/header.hpp line 18 (header
guard) to line 16 instead.
|
|
|
Tim Allen
|
29be18ce0c |
Update to v097r17 release.
byuu says:
Changelog:
- ruby: if DirectSoundCreate fails (no sound device present), return
false from init instead of crashing
- nall: improved edge case return values for
(basename,pathname,dirname,...)
- nall: renamed file_system_object class to inode
- nall: varuint_t replaced with VariadicNatural; which contains
.bit,.bits,.byte ala Natural/Integer
- nall: fixed boolean compilation error on Windows
- WS: popa should not restore SP
- GBA: rewrote the CPU/APU cores to use the .bit,.bits functions;
removed registers.cpp from each
Note that the GBA changes are extremely major. This is about five hours
worth of extremely delicate work. Any slight errors could break
emulation in extremely bad ways. Let's hold off on extensive testing
until the next WIP, after I do the same to the PPU.
So far ... endrift's SOUNDCNT_X I/O test is failing, although that code
didn't change, so clearly I messed up SOUNDCNT_H somehow ...
To compile on Windows:
1. change nall/string/platform.hpp line 47 to
return slice(result, 0, 3);
2. change ruby/video.wgl.cpp line 72 to
auto lock(uint32_t*& data, uint& pitch, uint width, uint height) -> bool {
3. add this line to the very top of hiro/windows/header.cpp:
#define boolean FuckYouMicrosoft
|
|
|
Tim Allen
|
4b29f4bad7 |
Update to v097r15 release.
byuu says: Changelog: - higan now uses Natural<Size>/Integer<Size> for its internal types - Super Famicom emulation now uses uint24 instead of uint for bus addresses (it's a 24-bit bus) - cleaned up gb/apu MMIO writes - cleaned up sfc/coprocessor/msu1 MMIO writes - ~3% speed penalty I've wanted to do that 24-bit bus thing for so long, but have always been afraid of the speed impact. It's probably going to hurt balanced/performance once they compile again, but it wasn't significant enough to harm the accuracy core's frame rate, thankfully. Only lost one frame per second. The GBA core handlers are clearly going to take a lot more work. The bit-ranges will make it substantially easier to handle, though. Lots of 32-bit registers where certain values span multiple bytes, but we have to be able to read/write at byte-granularity. |
|
|
Tim Allen
|
ef65bb862a |
Update to 20160215 release.
byuu says: Got it. Wow, that didn't hurt nearly as much as I thought it was going to. Dropped from 127.5fps to 123.5fps to use Natural/Integer for (u)int(8,16,32,64). That's totally worth the cost. |
|
|
Tim Allen
|
0d0af39b44 |
Update to v097r14 release.
byuu says: This is a few days old, but oh well. This WIP changes nall,hiro,ruby,icarus back to (u)int(8,16,32,64)_t. I'm slowly pushing for (u)int(8,16,32,64) to use my custom Integer<Size>/Natural<Size> classes instead. But it's going to be one hell of a struggle to get that into higan. |
|
|
Tim Allen
|
32a95a9761 |
Update to v097r12 release.
byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now. |
|
|
Tim Allen
|
7a748e093e |
Update to v097r10 release.
byuu says: All 256 instructions implemented fully. Fixed a major bug with instructions that both read and write to ModRM with displacement. Riviera now runs into an infinite loop ... possibly crashed, possibly waiting on interrupts or in to return something. Added a bunch of PPU settings registers, but nothing's actually rendering with them yet. |
|
|
Tim Allen
|
344e63d928 |
Update to v097r02 release.
byuu says:
Note: balanced/performance profiles still broken, sorry.
Changelog:
- added nall/GNUmakefile unique() function; used on linking phase of
higan
- added nall/unique_pointer
- target-tomoko and {System}::Video updated to use
unique_pointer<ClassName> instead of ClassName* [1]
- locate() updated to search multiple paths [2]
- GB: pass gekkio's if_ie_registers and boot_hwio-G test ROMs
- FC, GB, GBA: merge video/ into the PPU cores
- ruby: fixed ~AudioXAudio2() typo
[1] I expected this to cause new crashes on exit due to changing the
order of destruction of objects (and deleting things that weren't
deleted before), but ... so far, so good. I guess we'll see what crops
up, especially on OS X (which is already crashing for unknown reasons on
exit.)
[2] right now, the search paths are: programpath(), {configpath(),
"higan/"}, {localpath(), "higan/"}; but we can add as many more as we
want, and we can also add platform-specific versions.
|
|
|
Tim Allen
|
f1ebef2ea8 |
Update to v097r01 release.
byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here. |
|
|
Tim Allen
|
cec33c1d0f |
Update to v096r07 release.
byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan |
|
|
Tim Allen
|
653bb378ee |
Update to v096r03 release.
byuu says: Changelog: - fixed icarus to save settings properly - fixed higan's full screen toggle on OS X - increased "Add Codes" button width to avoid text clipping - implemented cocoa/canvas.cpp - added 1s delay after mapping inputs before re-enabling the window (wasn't actually necessary, but already added it) - fixed setEnabled(false) on Cocoa's ListView and TextEdit widgets - updated nall::programpath() to use GetModuleFileName on Windows - GB: system uses open collector logic, so unmapped reads return 0xFF, not 0x00 (passes blargg's cpu_instrs again) [gekkio] |
|
|
Tim Allen
|
0b923489dd |
Update to 20160106 OS X Preview for Developers release.
byuu says: New update. Most of the work today went into eliminating hiro::Image from all objects in all ports, replacing with nall::image. That took an eternity. Changelog: - fixed crashing bug when loading games [thanks endrift!!] - toggling "show status bar" option adjusts window geometry (not supposed to recenter the window, though) - button sizes improved; icon-only button icons no longer being cut off |
|
|
Tim Allen
|
4d193d7d94 |
Update to v096r02 (OS X Preview for Developers) release.
byuu says:
Warning: this is not for the faint of heart. This is a very early,
unpolished, buggy release. But help testing/fixing bugs would be greatly
appreciated for anyone willing.
Requirements:
- Mac OS X 10.7+
- Xcode 7.2+
Installation Commands:
cd higan
gmake -j 4
gmake install
cd ../icarus
gmake -j 4
gmake install
(gmake install is absolutely required, sorry. You'll be missing key
files in key places if you don't run it, and nothing will work.)
(gmake uninstall also exists, or you can just delete the .app bundles
from your Applications folder, and the Dev folder on your desktop.)
If you want to use the GBA emulation, then you need to drop the GBA BIOS
into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom
Usage:
You'll now find higan.app and icarus.app in your Applications folders.
First, run icarus.app, navigate to where you keep your game ROMs. Now
click the settings button at the bottom right, and check "Create
Manifests", and click OK. (You'll need to do this every time you run
icarus because there's some sort of bug on OSX saving the settings.) Now
click "Import", and let it bring in your games into ~/Emulation.
Note: "Create Manifests" is required. I don't yet have a pipe
implementation on OS X for higan to invoke icarus yet. If you don't
check this box, it won't create manifest.bml files, and your games won't
run at all.
Now you can run higan.app. The first thing you'll want to do is go to
higan->Preferences... and assign inputs for your gamepads. At the very
least, do it for the default controller for all the systems you want to
emulate.
Now this is very important ... close the application at this point so
that it writes your config file to disk. There's a serious crashing bug,
and if you trigger it, you'll lose your input bindings.
Now the really annoying part ... go to Library->{System} and pick the
game you want to play. Right now, there's a ~50% chance the application
will bomb. It seems the hiro::pListView object is getting destroyed, yet
somehow the internal Cocoa callbacks are being triggered anyway. I don't
know how this is possible, and my attempts to debug with lldb have been
a failure :(
If you're unlucky, the application will crash. Restart and try again. If
it crashes every single time, then you can try launching your game from
the command-line instead. Example:
open /Applications/higan.app \
--args ~/Emulation/Super\ Famicom/Zelda3.sfc/
Help wanted:
I could really, really, really use some help with that crashing on game
loading. There's a lot of rough edges, but they're all cosmetic. This
one thing is pretty much the only major show-stopping issue at the
moment, preventing a wider general audience pre-compiled binary preview.
|
|
|
Tim Allen
|
47d4bd4d81 |
Update to v096r01 release.
byuu says: Changelog: - restructured the project and removed a whole bunch of old/dead directives from higan/GNUmakefile - huge amounts of work on hiro/cocoa (compiles but ~70% of the functionality is commented out) - fixed a masking error in my ARM CPU disassembler [Lioncash] - SFC: decided to change board cic=(411,413) back to board region=(ntsc,pal) ... the former was too obtuse If you rename Boolean (it's a problem with an include from ruby, not from hiro) and disable all the ruby drivers, you can compile an OS X binary, but obviously it's not going to do anything. It's a boring WIP, I just wanted to push out the project structure change now at the start of this WIP cycle. |
|
|
Tim Allen
|
702b657e75 |
Update to v095r18 release.
byuu says: Changelog: - replaced popen() with execvp() / CreateProcess() - suppressed (hid) controllers with no mappable inputs from the input settings panel This gets rid of the window flashing when loading games with higan+icarus. And hiding of empty devices should be a huge usability improvement, especially since "None" was appearing at the top of the list before for the SNES. |
|
|
Tim Allen
|
2c53d5fbc0 |
Update to v095r12 release.
byuu says: Got it. They broke in r05. Changelog: - fixed typo in sfc/cpu/timing.cpp that was breaking coprocessor games with clocks - updated sfc/coprocessor/hitachidsp to not access Bus directly |
|
|
Tim Allen
|
f2a416aea9 |
Update to v095r11 release.
byuu says: Changelog: - SFC: "uint8 read(uint addr)" -> "uint8 read(uint addr, uint8 data)" - hiro: mHorizontalLayout::setGeometry() return value - hiro/GTK: ListView,TreeView::setFocused() does not grab focus of first item Notes: - nall/windows/utf8.hpp needs using uint = unsigned; at the top to compile - sfc/balanced, sfc/performance won't compile yet Seems Cx4 games broke a while back. Not from this WIP, either. I'll go back and find out what's wrong now. |
|
|
Tim Allen
|
78d49d3873 |
Update to v095r10 release.
byuu says: Changelog: - int_t<bits> replaced with Integer<bits> - uint_t<bits> replaced with Natural<bits> - fixed "Synchronize Audio" menu option that broke recently - all of sfc/performance ported to "auto function() -> return;" syntax With this WIP, all of higan is finally ported over to the new function declaration syntax. Thank the gods. There's still going to be periodic disruption for diffs from porting over signed->int, unsigned->uint, and whatever we come up with for the new Natural<> and Integer<> classes. But the worst of it's behind us now. |
|
|
Tim Allen
|
65a3306ad5 |
Update to v095r09 release.
byuu says:
Changelog:
- all of fc/ ported to "auto function() -> return;" syntax
- (includes all of cartridge/board and cartridge/chip as well; even
though they're all deprecated)
- sfc balanced profile ported to "auto function() -> return;" syntax
- sfc balanced and performance profiles compile again
- Linux always gets -ldl
- removed arch=x86 logic from nall/GNUmakefile, as TDM/GCC64 can't
produce bug-free 32-bit binaries anyway
The only code that continues to use the old function syntax is the SFC
performance core, obscure parts of nall that higan doesn't use, and the
pieces of code that weren't written by me (blargg's SFC-DSP, Ryphecha's
sinc resampler, and OV2's xaudio2 header file.)
I was too burned out to finish it tonight. The above was about four
hours straight of non-stop typing. Really can't wait to be done with
this once and for all.
|
|
|
Tim Allen
|
a219f9c121 |
Update to v095r08 release.
byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course. |
|
|
Tim Allen
|
41c478ac4a |
Update to v095r07 release.
byuu says:
Changelog:
- entire GBA core ported to auto function() -> return; syntax
- fixed GBA BLDY bug that was causing flickering in a few games
- replaced nall/config usage with nall/string/markup/node
- this merges all configuration files to a unified settings.bml file
- added "Ignore Manifests" option to the advanced setting tab
- this lets you keep a manifest.bml for an older version of higan; if
you want to do regression testing
Be sure to remap your controller/hotkey inputs, and for SNES, choose
"Gamepad" from "Controller Port 1" in the system menu. Otherwise you
won't get any input. No need to blow away your old config files, unless
you want to.
|
|
|
Tim Allen
|
40f4b91000 |
Update to v095r06 release.
byuu says: Changelog: - fixed I/O register reads; perfect score on endrift's I/O tests now - fixed mouse capture clipping on Windows [Cydrak] - several hours of code maintenance work done on the SFC core All higan/sfc files should now use the auto fn() -> ret; syntax. Haven't converted all unsigned->uint yet. Also, probably won't do sfc/alt as that's mostly just speed hack stuff. Errata: - forgot auto& instead of just auto on SuperFamicom::Video::draw_cursor, which makes Super Scope / Justifier crash. Will be fixed in the next WIP. |
|
|
Tim Allen
|
6d9f43a37b |
Update to v095r05 release.
byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices. |