We check the in-kernel irqchip support when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:
* vsm3me.vv
* vsm3c.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:
* vsha2ms.vv
* vsha2c[hl].vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:
* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:
* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Zewen Ye <lustrew@foxmail.com>
Cc: Weiwei Li <liweiwei@iscas.ac.cn>
Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e ("target/riscv: move zmmul out of the experimental properties")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: H extension requires priv spec 1.12.0
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel detects and enables this bit. Once trapped,
EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so
no changes required within linux-user/aarch64/cpu_loop.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cortex-a710 is a first generation ARMv9.0-A processor.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a stub implementation, as a write is a "request".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to recent KVM changes, QEMU is setting a ptimer offset resulting
in unintended trap and emulate access and a consequent performance
hit. Filter out the PTIMER_CNT register to restore trapless ptimer
access.
Quoting Andrew Jones:
Simply reading the CNT register and writing back the same value is
enough to set an offset, since the timer will have certainly moved
past whatever value was read by the time it's written. QEMU
frequently saves and restores all registers in the get-reg-list array,
unless they've been explicitly filtered out (with Linux commit
680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to
restore trapless ptimer accesses, we need a QEMU patch to filter out
the register.
See
https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9
for additional context.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Colton Lewis <coltonlewis@google.com>
Message-id: 20230831190052.129045-1-coltonlewis@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
STGP writes to tag memory, it does not check it.
This happened to work because we wrote tag memory first
so that the check always succeeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230901203103.136408-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An instruction is a 'combined' Pointer Authentication instruction
if it does something in addition to PAC -- for instance, branching
to or loading an address from the authenticated pointer.
Knowing whether a PAC operation is 'combined' is needed to
implement FEAT_FPACCOMBINE.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-9-richard.henderson@linaro.org
Message-Id: <20230609172324.982888-7-aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the QARMA3 cryptographic algorithm for PAC calculation.
Implement a cpu feature to select the algorithm and document it.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-6-richard.henderson@linaro.org
Message-Id: <20230609172324.982888-4-aaron@os.amperecomputing.com>
[rth: Merge cpu feature addition from another patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have cpu properties to adjust the pauth algorithm for the
purpose of speed of emulation. Retain the set of pauth features
supported by the cpu even as the algorithm changes.
This already affects the neoverse-v1 cpu, which has FEAT_EPAC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename isar_feature_aa64_pauth_arch to isar_feature_aa64_pauth_qarma5
to distinguish the other architectural algorithm qarma3.
Add ARMPauthFeature and isar_feature_pauth_feature to cover the
other pauth conditions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-4-richard.henderson@linaro.org
Message-Id: <20230609172324.982888-3-aaron@os.amperecomputing.com>
[rth: Add ARMPauthFeature and eliminate most other predicates]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-3-richard.henderson@linaro.org
[PMM: drop the HVF part of the patch and just comment that
we need to do something when the register appears in that API]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
table[i] is allocated in create_new_table() using g_new().
Use g_free(table[i]) instead of free(table[i]) to comply with QEMU low
level memory management guidelines.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Mjt: minor commit comment tweak]
TARGET_BIG_ENDIAN is *always* defined, either as 0 for little endian
targets or as 1 for big endian targets. So we can use this as a value
directly in places that need such a 0 or 1 for some reason, instead
of taking a detour through an additional local variable or something
similar.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The file has been converted to .rst a while ago - make sure that the
references in the trace-events files are pointing to the right location
now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm_pc_setup_irq_routing() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_has_pit_state2() is only defined for x86 targets (in
target/i386/kvm/kvm.c). Its declaration is pointless on
all other targets. Have it return a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_get_apic_state() is only defined for x86 targets (in
hw/i386/kvm/apic.c). Its declaration is pointless on all
other targets.
Since we include "linux-headers/asm-x86/kvm.h", no need
to forward-declare 'struct kvm_lapic_state'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-12-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_get_supported_cpuid() / kvm_arch_get_supported_msr_feature()
are only defined for x86 targets (in target/i386/kvm/kvm.c). Their
declarations are pointless on other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-11-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep the function accessed by target/i386/ and hw/i386/
exposed, restrict the ones accessed by target/i386/kvm/.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-10-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_enabled() before kvm_hv_vpindex_settable()
to let the compiler elide its call.
kvm-stub.c is now empty, remove it.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-9-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_enabled() before kvm_enable_x2apic() to let the compiler elide
its call. Cleanup the code by simplifying "!xen_enabled() &&
kvm_enabled()" to just "kvm_enabled()".
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-8-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All these functions:
- kvm_arch_get_supported_cpuid()
- kvm_has_smm(()
- kvm_hyperv_expand_features()
- kvm_set_max_apic_id()
are called after checking for kvm_enabled(), which is
false when KVM is not built. Since the compiler elides
these functions, their stubs are not used and can be
removed.
Inspired-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-7-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to have cpu-sysemu.c become accelerator-agnostic,
inline kvm_apic_in_kernel() -- which is a simple wrapper
to kvm_irqchip_in_kernel() -- and use the generic "sysemu/kvm.h"
header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
User emulation doesn't need any KVM declarations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904124325.79040-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's unnecessary for non-KVM accelerators(TCG, for example),
to call this function, so change the order of kvm_enable() judgment.
The static inline function that returns -1 directly does not work
in TCG's situation.
Signed-off-by: jianchunfu <chunfu.jian@shingroup.cn>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1779
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
LQ, STQ have the same register-pair ordering as LQARX/STQARX., which is
the even (lower) register contains the most significant bits. This is
not implemented correctly for big-endian.
do_ldst_quad() has variables low_addr_gpr and high_addr_gpr which is
confusing because they are low and high addresses, whereas LQARX/STQARX.
and most such things use the low and high values for lo/hi variables.
The conversion to native 128-bit memory access functions missed this
strangeness.
Fix this by changing the if condition, and change the variable names to
hi/lo to match convention.
Cc: qemu-stable@nongnu.org
Reported-by: Ivan Warren <ivan@vmfacility.fr>
Fixes: 57b38ffd0c ("target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1836
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the machine is reset to load a new snapshot while being debugged
with replay-record, it is done from another thread, so the CPU does
not run the register setting operations. Set CPU registers directly in
machine reset.
Cc: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ppc only migrates reserve_addr, so the destination machine can get a
valid reservation with an incorrect reservation value of 0. Prior to
commit 392d328abe ("target/ppc: Ensure stcx size matches larx"),
this could permit a stcx. to incorrectly succeed. That commit
inadvertently fixed that bug because the target machine starts with an
impossible reservation size of 0, so any stcx. will fail.
This behaviour is permitted by the ISA because reservation loss may
have implementation-dependent cause. What's more, with KVM machines it
is impossible save or reasonably restore reservation state. However if
the vmstate is being used for record-replay, the reservation must be
saved and restored exactly in order for execution from snapshot to
match the record.
This patch deprecates the existing incomplete reserve_addr vmstate,
and adds a new vmstate subsection with complete reservation state.
The new vmstate is needed only when record-replay mode is active.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TCG does not maintain the DEC reigster in the SPR array, so it does get
migrated. TCG also needs to re-start the decrementer timer on the
destination machine.
Load and store the decrementer into the SPR when migrating. This works
for the level-triggered (book3s) decrementer, and should be compatible
with existing KVM machines that do keep the DEC value there.
This fixes lost decrementer interrupt on migration that can cause
hangs, as well as other problems including record-replay bugs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Convention is to reset the exception_index and error_code after handling
an interrupt. The vhyp hcall handler fails to do this. This does not
appear to have ill effects because cpu_handle_exception() clears
exception_index later, but it is fragile and inconsistent. Reset the
exception state after handling vhyp hcall like other handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.07S introduced the watchpoint facility based on the DAWR0
and DAWRX0 SPRs. Implement this in TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.07S introduced the breakpoint facility based on the CIABR SPR.
Implement this in TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
BookS does not take single step interrupts on completion of rfi and
similar (rfid, hrfid, rfscv). This is not a completely clean way to
do it, but in general non-branch instructions that change NIP on
completion are excluded.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Improve the emulation accuracy of the single step and branch trace
interrupts for v2.07S. Set SRR1[33]=1, and set SIAR to completed
instruction address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Single-step interrupts are suppressed if the nip is between 0x100 and
0xf00. This has been the case for a long time and it's not clear what
the intention is. Likely either an attempt to suppress trace interrupts
for instructions that cause an interrupt on completion, or a workaround
to prevent software tripping over itself single stepping its interrupt
handlers.
BookE interrupt vectors are set by IVOR registers, and BookS has AIL
modes and new interrupt types, so there are many interrupts including
the debug interrupt which can be outside this range. So any effect it
might have had does not cover most cases (including Linux on recent
BookS CPUs).
Remove this special case.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg : fixed typo in commit logs ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Linux sets these to control cache flush behaviour on Power9. Supervisor
and hypervisor are allowed to write, and reads are noops.
Add implementations to avoid noisy messages when booting Linux under the
pseries machine with guest_errors enabled.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Change radix model to always generate a storage interrupt when the R/C
bits are not set appropriately in a PTE instead of setting the bits
itself. According to the ISA both behaviors are valid, but in practice
this change more closely matches behavior observed on the POWER9 CPU.
From the POWER9 Processor User's Manual, Section 4.10.13.1: "When
performing Radix translation, the POWER9 hardware triggers the
appropriate interrupt ... for the mode and type of access whenever
Reference (R) and Change (C) bits require setting in either the guest or
host page-table entry (PTE)."
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTw5v4RHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbX2DRAAo7NPNPQ2nsYDdYfKAGt8OSg1BHqh1RYH
jvLiU5xrWQ3whmSJYw4rcSyBk4yC+lIjoXT6oBn6O40Q1r7OmrWgtrn9g//3SLHb
Wfob5bZkmRiETDZNFFpYcpRPzElF3ZqIfwOhJ3zfmAQxqeTxpTnAuq2vI38pk3Hz
4pQR/j2IKZFmFt6cdYUaKi32odDK6ySKAFCKy9I8sz2hJgOXQRYBkjorDx+g+hoF
o7DTGkA3uH2xXlLQKhbEGm5xQMlcBgTMb2XeguvRbb7g/Uc046homwm0r6rejDy5
EgW9Kx3Y34QYZt51onqmA57MNNQboubHkSz9W2b57OX+IWA3VRncdBAxdGmubRTY
Jb6LsBZSMdKQBXxgIP3DZjvH6MxYjA9Iy3YI7Mk+hJnDACkFVJOCPxS9acnmjYE5
Nn935GmbYMazfci0c3zc/899hAGDNglD9Tf6ourBjl1WLQstefXhlpzkbGWqSFjF
Tovpal+Rm6KLDFSfs6TsRp6+FF8a6C1k251Ai67adkiCYM/jKwVoiHrsUJeG0vyc
791x5+lixxkLUHu1qNYfEdxvaOE8guhXRt3zJIjmphio3v+RFBLbzC6lTzeZbTTv
DpnnoFJ/tCzdLew7A1QuzuW361ywyKVE4Qp8HQfaJCOJT9aGgMdyoHlpgz0ojgJm
fD8Vfl9GZFQ=
=tZWg
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu into staging
* Use precise selfmodifying code mode on s390x TCG
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTw5v4RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbX2DRAAo7NPNPQ2nsYDdYfKAGt8OSg1BHqh1RYH
# jvLiU5xrWQ3whmSJYw4rcSyBk4yC+lIjoXT6oBn6O40Q1r7OmrWgtrn9g//3SLHb
# Wfob5bZkmRiETDZNFFpYcpRPzElF3ZqIfwOhJ3zfmAQxqeTxpTnAuq2vI38pk3Hz
# 4pQR/j2IKZFmFt6cdYUaKi32odDK6ySKAFCKy9I8sz2hJgOXQRYBkjorDx+g+hoF
# o7DTGkA3uH2xXlLQKhbEGm5xQMlcBgTMb2XeguvRbb7g/Uc046homwm0r6rejDy5
# EgW9Kx3Y34QYZt51onqmA57MNNQboubHkSz9W2b57OX+IWA3VRncdBAxdGmubRTY
# Jb6LsBZSMdKQBXxgIP3DZjvH6MxYjA9Iy3YI7Mk+hJnDACkFVJOCPxS9acnmjYE5
# Nn935GmbYMazfci0c3zc/899hAGDNglD9Tf6ourBjl1WLQstefXhlpzkbGWqSFjF
# Tovpal+Rm6KLDFSfs6TsRp6+FF8a6C1k251Ai67adkiCYM/jKwVoiHrsUJeG0vyc
# 791x5+lixxkLUHu1qNYfEdxvaOE8guhXRt3zJIjmphio3v+RFBLbzC6lTzeZbTTv
# DpnnoFJ/tCzdLew7A1QuzuW361ywyKVE4Qp8HQfaJCOJT9aGgMdyoHlpgz0ojgJm
# fD8Vfl9GZFQ=
# =tZWg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 15:16:14 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu:
meson: test for CONFIG_TCG in config_all
subprojects/berkeley-testfloat-3: Update to fix a problem with compiler warnings
tests/qtest/bios-tables-test: Check for virtio-iommu device before using it
tests/qtest/netdev-socket: Avoid variable-length array in inet_get_free_port_multiple()
tests/qtest/usb-hcd-xhci-test: Check availability of devices before using them
tests/tcg/s390x: Test precise self-modifying code handling
target/s390x: Define TARGET_HAS_PRECISE_SMC
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Latest Intel platform GraniteRapids-D introduces AMX-COMPLEX, which adds
two instructions to perform matrix multiplication of two tiles containing
complex elements and accumulate the results into a packed single precision
tile.
AMX-COMPLEX is enumerated via CPUID.(EAX=7,ECX=1):EDX[bit 8]. Add the CPUID
definition for AMX-COMPLEX, AMX-COMPLEX will be enabled automatically when
using '-cpu host' and KVM advertises AMX-COMPLEX to userspace.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230830074324.84059-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CVTPS2PD only loads a half-register for memory, unlike the other
operations under 0x0F 0x5A. "Unpack" the group into separate
emission functions instead of using gen_unary_fp_sse.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CVTPS2PD only loads a half-register for memory, like CVTPH2PS. It can
reuse the "ph" packed half-precision size to load a half-register,
but rename it to "xh" because it is now a variation of "x" (it is not
used only for half-precision values).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230823065335.1919380-7-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since commit fa92bd4af7 ("target/xtensa: fix access to
the INTERRUPT SR") these files use QEMU atomic API.
Explicit the header inclusion instead of relying on
implicit and indirect inclusion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-10-philmd@linaro.org>
This files only access the address_space_ld/st API, declared
in "exec/cpu-all.h", already included by "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-9-philmd@linaro.org>
"qemu/main-loop.h" declares functions related to QEMU's
main loop mutex, which these files don't access. Remove
the unused "qemu/main-loop.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-8-philmd@linaro.org>
These files don't use the CPU ld/st API, remove the unnecessary
"exec/cpu_ldst.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230828221314.18435-7-philmd@linaro.org>
All these files only access the translator_ld/st API declared
in "exec/translator.h". The CPU ld/st API from declared in
"exec/cpu_ldst.h" is not used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-5-philmd@linaro.org>
All these files access the CPU LD/ST API declared in "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-4-philmd@linaro.org>
Declarations from "riscv/pmu.h" don't need anything from "qemu/log.h",
reduce it's inclusion to the source.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-3-philmd@linaro.org>
Since commit c2eff582a3 ("target/ppc: PMU basic cycle count for
pseries TCG") pmu_update_cycles() uses QEMU_CLOCK_VIRTUAL and
calls qemu_clock_get_ns(), both defined in "qemu/timer.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-2-philmd@linaro.org>
By default, C function prototypes declared in headers are visible,
so there is no need to declare them as 'extern' functions.
Remove this redundancy in a single bulk commit; do not modify:
- meson.build (used to check function availability at runtime)
- pc-bios/
- libdecnumber/
- tests/
- *.c
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230605175647.88395-5-philmd@linaro.org>
HAX is deprecated since commits 73741fda6c ("MAINTAINERS: Abort
HAXM maintenance") and 90c167a1da ("docs/about/deprecated: Mark
HAXM in QEMU as deprecated"), released in v8.0.0.
Per the latest HAXM release (v7.8 [*]), the latest QEMU supported
is v7.2:
Note: Up to this release, HAXM supports QEMU from 2.9.0 to 7.2.0.
The next commit (https://github.com/intel/haxm/commit/da1b8ec072)
added:
HAXM v7.8.0 is our last release and we will not accept
pull requests or respond to issues after this.
It became very hard to build and test HAXM. Its previous
maintainers made it clear they won't help. It doesn't seem to be
a very good use of QEMU maintainers to spend their time in a dead
project. Save our time by removing this orphan zombie code.
[*] https://github.com/intel/haxm/releases/tag/v7.8.0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230831082016.60885-1-philmd@linaro.org>
PoP (Sequence of Storage References -> Instruction Fetching) says:
... if a store that is conceptually earlier is
made by the same CPU using the same effective
address as that by which the instruction is subse-
quently fetched, the updated information is obtained ...
QEMU already has support for this in the common code; enable it for
s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230807114921.438881-1-iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL refactoring
* Implement SRC device for i.MX7
* Catch illegal-exception-return from EL3 with bad NSE/NS
* Use 64-bit offsets for holding time_t differences in RTC devices
* Model correct number of MPU regions for an505, an521, an524 boards
-----BEGIN PGP SIGNATURE-----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=MFh3
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL refactoring
* Implement SRC device for i.MX7
* Catch illegal-exception-return from EL3 with bad NSE/NS
* Use 64-bit offsets for holding time_t differences in RTC devices
* Model correct number of MPU regions for an505, an521, an524 boards
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmTwbukZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ihBD/wK8Iz0KpTAwZBDAodnSZrh
# tQnJAvYFp8CxA4O8sZ9IeWsZh90gzsTCZi0NqUTTzvWCJfxkB7qTPdlJT5IzVxou
# oEUk2aogSJhRA3XRJzqArXsPlnZGSYDbtwKx4VtfCvOCCH08Y7nhnFaRj1oFnR4Q
# 0PE/8YtGXTBxLHrO8U3tomg7zElzOUP8ZVZtb30BOyw1jtfSD03IZR8dzpA43u1E
# Hh418WvVekmwFoFNh8yUeHzbyXMZufzvbJPuDGJ8pPWwIpvSG6chOnKF8jZll+Ur
# DqOsDkGlQgcBR2QwYfSPClrEkX8yahJ95PBfM6giG+DQC7OiElqXqTiUGZcpgUVo
# uSUbzS4YPsxCnyVV6SBXV+f/8hdXBxOSHTgl7OAFa8X9OwWwspxHJ/v2o/2ibnUT
# hTTkFp/w1nQwVEN8xf1DOUpm/J2Wr8UeH4f776daSrfKAol2BKbHb8dOgGLQCwqb
# G+iDcE4bkzRqly6f+uVk8xSEZDd9P1NYoxKV+gNlV1dTspdHVpTC+rXMa8dRw5hI
# 4KgaAslj++Xa229xkjORXCJ1cICRIebYg7+SjvTtGBYsFV7plsCcYb/R9yLmhVCf
# fKHKKaYe9sQJ82apOIkTc+nnW8BQQx6XUmU/A//iZ8JGLk6DpJcZ8f1m/2rVZTsl
# 9+lsmpBf4w+uR4o+Womhfw==
# =MFh3
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 06:43:53 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
hw/arm: Set number of MPU regions correctly for an505, an521, an524
hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties
target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init
rtc: Use time_t for passing and returning time offsets
hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference
hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec
hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm()
target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS
Add i.MX7 SRC device implementation
Add i.MX7 missing TZ devices and memory regions
Refactor i.MX7 processor code
Add i.MX6UL missing devices.
Refactor i.MX6UL processor code
Remove i.MX7 IOMUX GPR device from i.MX6UL
target/arm: properly document FEAT_CRC32
target/arm: Implement FEAT_HPDS2 as a no-op
target/arm: Suppress FEAT_TRBE (Trace Buffer Extension)
target/arm: Apply access checks to neoverse-v1 special registers
target/arm: Apply access checks to neoverse-n1 special registers
target/arm: Introduce make_ccsidr64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Where architecturally one ARM_FEATURE_X flag implies another
ARM_FEATURE_Y, we allow the CPU init function to only set X, and then
set Y for it. Currently we do this in two places -- we set a few
flags in arm_cpu_post_init() because we need them to decide which
properties to create on the CPU object, and then we do the rest in
arm_cpu_realizefn(). However, this is fragile, because it's easy to
add a new property and not notice that this means that an X-implies-Y
check now has to move from realize to post-init.
As a specific example, the pmsav7-dregion property is conditional
on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear
on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and
rely on V8-implies-V7, which doesn't happen until the realizefn.
Move all of these X-implies-Y checks into a new function, which
we call at the top of arm_cpu_post_init(), so the feature bits
are available at that point.
This does now give us the reverse issue, that if there's a feature
bit which is enabled or disabled by the setting of a property then
then X-implies-Y features that are dependent on that property need to
be in realize, not in this new function. But the only one of those
is the "EL3 implies VBAR" which is already in the right place, so
putting things this way round seems better to me.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org
The architecture requires (R_TYTWB) that an attempt to return from EL3
when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This
enforces that the CPU can't ever be executing below EL3 with the
NSE,NS bits indicating an invalid security state.)
We were missing this check; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230807150618.101357-1-peter.maydell@linaro.org
This is a mandatory feature for Armv8.1 architectures but we don't
state the feature clearly in our emulation list. Also include
FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org
Cc: qemu-stable@nongnu.org
Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org>
[PMM: pluralize 'instructions' in docs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature allows the operating system to set TCR_ELx.HWU*
to allow the implementation to use the PBHA bits from the
block and page descriptors for for IMPLEMENTATION DEFINED
purposes. Since QEMU has no need to use these bits, we may
simply ignore them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing
external to the cpu, which is out of scope for QEMU.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is only one additional EL1 register modeled, which
also needs to use access_actlr_w.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Access to many of the special registers is enabled or disabled
by ACTLR_EL[23], which we implement as constant 0, which means
that all writes outside EL3 should trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not hard-code the constants for Neoverse V1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the cpu support MTE, but the system does not, reduce cpu
support to user instructions at EL0 instead of completely
disabling MTE. If we encounter a cpu implementation which does
something else, we can revisit this setting.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support all of the easy GM block sizes.
Use direct memory operations, since the pointers are aligned.
While BS=2 (16 bytes, 1 tag) is a legal setting, that requires
an atomic store of one nibble. This is not difficult, but there
is also no point in supporting it until required.
Note that cortex-a710 sets GM blocksize to match its cacheline
size of 64 bytes. I expect many implementations will also
match the cacheline, which makes 16 bytes very unlikely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously we hard-coded the blocksize with GMID_EL1_BS.
But the value we choose for -cpu max does not match the
value that cortex-a710 uses.
Mirror the way we handle dcz_blocksize.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230811214031.171020-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This value is only 4 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230811214031.171020-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Try and make the self reported global hack a little less hackish by
providing a query function instead. As gdb_has_xml was always set if
we negotiated XML we can now use the presence of ->target_xml as the
test instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-12-alex.bennee@linaro.org>
Yong-Xuan Wang