The ASDR register was introduced in ISA v3.0. It has not been
implemented for HPT. With HPT, ASDR is the format of the slbmte RS
operand (containing VSID), which matches the ppc_slb_t field.
Fixes: 3367c62f52 ("target/ppc: Support for POWER9 native hash")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When CR0.TS=1, execution of x87 FPU, MMX, and some SSE instructions will
cause a Device Not Available (DNA) exception (#NM). System software uses
this exception event to lazily context switch FPU state.
Before this patch, enter_mmx helpers may be generated just before #NM
generation, prematurely resetting FPU state before the guest has a
chance to save it.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
Message-ID: <CADc=-s5F10muEhLs4f3mxqsEPAHWj0XFfOC2sfFMVHrk9fcpMg@mail.gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On hppa the Instruction Address Offset Queue (IAOQ) registers specifies
the next to-be-executed instructions addresses. Each generated TB writes those
registers at least once, so those registers are used heavily in generated
code.
Looking at the generated assembly, for a x86-64 host this code
to write the address $0x7ffe826f into iaoq_f is generated:
0x7f73e8000184: c7 85 d4 01 00 00 6f 82 movl $0x7ffe826f, 0x1d4(%rbp)
0x7f73e800018c: fe 7f
0x7f73e800018e: c7 85 d8 01 00 00 73 82 movl $0x7ffe8273, 0x1d8(%rbp)
0x7f73e8000196: fe 7f
With the trivial change, by moving the variables iaoq_f and iaoq_b to
the top of struct CPUArchState, the offset to %rbp is reduced (from
0x1d4 to 0), which allows the x86-64 tcg to generate 3 bytes less of
generated code per move instruction:
0x7fc1e800018c: c7 45 00 6f 82 fe 7f movl $0x7ffe826f, (%rbp)
0x7fc1e8000193: c7 45 04 73 82 fe 7f movl $0x7ffe8273, 4(%rbp)
Overall this is a reduction of generated code (not a reduction of
number of instructions).
A test run with checks the generated code size by running "/bin/ls"
with qemu-user shows that the code size shrinks from 1616767 to 1569273
bytes, which is ~97% of the former size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Cc: qemu-stable@nongnu.org
Fixes: 950272506d ("target/m68k: Use semihosting/syscalls.h")
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801154519.3505531-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: d1e23cbaa4 ("target/nios2: Use semihosting/syscalls.h")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230731235245.295513-1-keithp@keithp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of using R_ARG0 (the semihost function number), use R_ARG1
(the provided exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230801152245.332749-1-keithp@keithp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out (CID 1507534, 1507968) that we sometimes access
env->xen_singleshot_timer_ns under the protection of
env->xen_timers_lock and sometimes not.
This isn't always an issue. There are two modes for the timers; if the
kernel supports the EVTCHN_SEND capability then it handles all the timer
hypercalls and delivery internally, and all we use the field for is to
get/set the timer as part of the vCPU state via an ioctl(). If the
kernel doesn't have that support, then we do all the emulation within
qemu, and *those* are the code paths where we actually care about the
locking.
But it doesn't hurt to be a little bit more consistent and avoid having
to explain *why* it's OK.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-3-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The architecture specification calls for the EPCR to be set to "Address
of next not executed instruction" when there is a floating point
exception (FPE). This was not being done, so fix it by using the same
pattern as syscall. Also, we move this logic down to be done for
instructions not in the delay slot as called for by the architecture
manual.
Without this patch FPU exceptions will loop, as the exception handling
will always return back to the failed floating point instruction.
This was not noticed in earlier testing because:
1. The compiler usually generates code which clobbers the input operand
such as:
lf.div.s r19,r17,r19
2. The target will store the operation output before to the register
before handling the exception. So an operation such as:
float a = 100.0f;
float b = 0.0f;
float c = a / b; /* lf.div.s r19,r17,r19 */
Will first execute:
100 / 0 -> Store inf to c (r19)
-> triggering divide by zero exception
-> handle and return
Then it will execute:
100 / inf -> Store 0 to c (no exception)
To confirm the looping behavior and the fix I used the following:
float fpu_div(float a, float b) {
float c;
asm volatile("lf.div.s %0, %1, %2"
: "+r" (c)
: "r" (a), "r" (b));
return c;
}
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This solves a problem in which the store to LowCore during tlb_fill
triggers a clean-page TB invalidation for page0 during translation,
which results in an assertion failure for locked pages.
By delaying the store until after the exception has been raised,
we will have unwound the pages locked for translation and the
problem does not arise. There are plenty of other updates to
LowCore while delivering an interrupt/exception; trans_exc_code
does not need to be special.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The change to use translator_use_goto_tb went too far, as the
CF_SINGLE_STEP flag managed by the translator only handles
gdb single stepping and not the architectural single stepping
modeled in DisasContext.singlestep_enabled.
Fixes: 6e9cc373ec ("target/ppc: Use translator_use_goto_tb")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1795
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we list all the Arm decodetree files together and add them
unconditionally to arm_ss. This means we build them for both
qemu-system-aarch64 and qemu-system-arm. However, some of them are
AArch64-specific, so there is no need to build them for
qemu-system-arm. (Meson is smart enough to notice that the generated
.c.inc file is not used by any objects that go into qemu-system-arm,
so we only unnecessarily run decodetree, not anything more
heavyweight like a recompile or relink, but it's still unnecessary
work.)
Split gen into gen_a32 and gen_a64, and only add gen_a64 for
TARGET_AARCH64 compiles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230718104628.1137734-1-peter.maydell@linaro.org
In commit 0b188ea05a we changed the implementation of
trans_CSEL() to use tcg_constant_i32(). However, this change
was incorrect, because the implementation of the function
sets up the TCGv_i32 rn and rm to be either zero or else
a TCG temp created in load_reg(), and these TCG temps are
then in both cases written to by the emitted TCG ops.
The result is that we hit a TCG assertion:
qemu-system-arm: ../../tcg/tcg.c:4455: tcg_reg_alloc_mov: Assertion `!temp_readonly(ots)' failed.
(or on a non-debug build, just produce a garbage result)
Adjust the code so that rn and rm are always writeable
temporaries whether the instruction is using the special
case "0" or a normal register as input.
Cc: qemu-stable@nongnu.org
Fixes: 0b188ea05a ("target/arm: Use tcg_constant in trans_CSEL")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230727103906.2641264-1-peter.maydell@linaro.org
When converting to decodetree, the code to rebuild mop for the pair
only made it into trans_STP and not into trans_STGP.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1790
Fixes: 8c212eb659 ("target/arm: Convert load/store-pair to decodetree")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230726165416.309624-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/sd/sdhci: Default I/O ops to little endian
hw/mips/loongson3-virt: Only use default USB if available
hw/char/escc: Implement loopback mode to allow self-testing
target/mips: Avoid overruns and shifts by negative number
target/sparc: Handle FPRS correctly on big-endian hosts
target/tricore: Rename tricore_feature to avoid clash with libcapstone
-----BEGIN PGP SIGNATURE-----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=F+Wb
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-20230725' of https://github.com/philmd/qemu into staging
Misc patches queue
hw/sd/sdhci: Default I/O ops to little endian
hw/mips/loongson3-virt: Only use default USB if available
hw/char/escc: Implement loopback mode to allow self-testing
target/mips: Avoid overruns and shifts by negative number
target/sparc: Handle FPRS correctly on big-endian hosts
target/tricore: Rename tricore_feature to avoid clash with libcapstone
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmS/4ksACgkQ4+MsLN6t
# wN6OSg//cZY9C6fRXNNaIqkmnhjbaV6KLtjE7mOKp0RUyh3aN0dtTwWIjdJc0O5C
# iipHESYhcbHTiN/TxK0zXg4KgtKmtwqGsa3QTXGdTlSkTY/dMNioSpb7p82becu0
# fhCvGRLJ97j7/mhebiBNT/urrcG5h3n7CjA5IoFMMA4f+cajsGZHwmq5TTzc2ehy
# 4FuchjFUw+cgqU1peNYoqt2dfnxFg0EgKBSRikl8MyPf9lFzTlXOKbgd+qppG6hI
# 2fAUHyMqBkU22sAoK0eB0077LjgjPPQfmn8UPGkpGD5QZQcvBRNArg4fyHxCKTS7
# zOsO1Qc+4D2l2RJlIHgct2pmcHdT29TlTn2T4Lg900Hm09KelZh1XF+1BemCC13z
# cGWjPcYozvGFFiHlhazINtbGpB6XaP/Z3OwroRHRn+Mn3ss+FaU+j/p+4YlEVyFi
# 4yoEyjhNma6/hssmstifSQsaOf6XthzpS+XdKNB6G1b2WuRSc1Z59b2gcPBTwbXY
# B52lfI61nzSrP9pLuS8c/6hQXQvADIEndeWEcWZ50h3WW2Cemj9jTDVgfjWC4Vg9
# wV2U6NeTr+g54cSU5vcKiZrqsQHUoLiKbZFRJkXF7EEMbOErIQnyIS5l8xf71Pay
# YPxuPf1VprRiR07d+ZaA+wmEaBxLCUPEl1CEuu5NPVA9S4yIIWE=
# =F+Wb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Jul 2023 15:55:07 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'misc-fixes-20230725' of https://github.com/philmd/qemu:
target/tricore: Rename tricore_feature
target/sparc: Handle FPRS correctly on big-endian hosts
target/mips: Avoid shift by negative number in page_table_walk_refill()
target/mips: Pass directory/leaf shift values to walk_directory()
target/mips/mxu: Avoid overrun in gen_mxu_q8adde()
target/mips/mxu: Avoid overrun in gen_mxu_S32SLT()
target/mips/mxu: Replace magic array size by its definition
hw/char/escc: Implement loopback mode
hw/mips: Improve the default USB settings in the loongson3-virt machine
hw/sd/sdhci: Do not force sdhci_mmio_*_ops onto all SD controllers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
this name is used by capstone and will lead to a build failure of QEMU,
when capstone is enabled. So we rename it to tricore_has_feature(), to
match has_feature() in translate.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1774
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
this name is used by capstone and will lead to a build failure of QEMU,
when capstone is enabled. So we rename it to tricore_has_feature(), to
match has_feature() in translate.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1774
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230721060605.76636-1-kbastian@mail.uni-paderborn.de>
In CPUSparcState we define the fprs field as uint64_t. However we
then refer to it in translate.c via a TCGv_i32 which we set up with
tcg_global_mem_new_ptr(). This means that on a big-endian host when
the guest does something to writo te the FPRS register this value
ends up in the wrong half of the uint64_t, and the QEMU C code that
refers to env->fprs sees the wrong value. The effect of this is that
guest code that enables the FPU crashes with spurious FPU Disabled
exceptions. In particular, this is why
tests/avocado/machine_sparc64_sun4u.py:Sun4uMachine.test_sparc64_sun4u
times out on an s390 host.
There are multiple ways we could fix this; since there are actually
only three bits in the FPRS register and the code in translate.c
would be a bit painful to convert to dealing with a TCGv_i64, change
the type of the CPU state struct field to match what translate.c is
expecting.
(None of the other fields referenced by the r32[] array in
sparc_tcg_init() have the wrong type.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230717103544.637453-1-peter.maydell@linaro.org>
Coverity points out that in page_table_walk_refill() we can
shift by a negative number, which is undefined behaviour
(CID 1452918, 1452920, 1452922). We already catch the
negative directory_shift and leaf_shift as being a "bail
out early" case, but not until we've already used them to
calculated some offset values.
The shifts can be negative only if ptew > 1, so make the
bail-out-early check look directly at that, and only
calculate the shift amounts and the offsets based on them
after we have done that check. This allows
us to simplify the expressions used to calculate the
shift amounts, use an unsigned type, and avoids the
undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMD: Check for ptew > 1, use unsigned type]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-3-philmd@linaro.org>
We already evaluated directory_shift and leaf_shift in
page_table_walk_refill(), no need to do that again: pass
as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-2-philmd@linaro.org>
Coverity reports a potential overruns (CID 1517770):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Add a gen_extract_mxu_gpr() helper similar to
gen_load_mxu_gpr() to safely extract MXU registers.
Fixes: eb79951ab6 ("target/mips/mxu: Add Q8ADDE ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-4-philmd@linaro.org>
Coverity reports a potential overrun (CID 1517769):
Overrunning array "mxu_gpr" of 15 8-byte elements at
element index 4294967295 (byte offset 34359738367)
using index "XRb - 1U" (which evaluates to 4294967295).
Use gen_load_mxu_gpr() to safely load MXU registers.
Fixes: ff7936f009 ("target/mips/mxu: Add S32SLT ... insns")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230712060806.82323-2-philmd@linaro.org>
A lot of the code called from helper_exception_bkpt_insn() is written
assuming A-profile, but we will also call this helper on M-profile
CPUs when they execute a BKPT insn. This used to work by accident,
but recent changes mean that we will hit an assert when some of this
code calls down into lower level functions that end up calling
arm_security_space_below_el3(), arm_el_is_aa64(), and other functions
that now explicitly assert that the guest CPU is not M-profile.
Handle M-profile directly to avoid the assertions:
* in arm_debug_target_el(), M-profile debug exceptions always
go to EL1
* in arm_debug_exception_fsr(), M-profile always uses the short
format FSR (compare commit d7fe699be5, though in this case
the code in arm_v7m_cpu_do_interrupt() does not need to
look at the FSR value at all)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1775
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230721143239.1753066-1-peter.maydell@linaro.org
The test in tests/avocado/machine_loongarch.py is currently failing
on big endian hosts like s390x. By comparing the traces between running
the QEMU_EFI.fd bios on a s390x and on a x86 host, it's quickly obvious
that the CSRRD instruction for the CPUID is behaving differently. And
indeed: The code currently does a long read (i.e. 64 bit) from the
address that points to the CPUState->cpu_index field (with tcg_gen_ld_tl()
in the trans_csrrd() function). But this cpu_index field is only an "int"
(i.e. 32 bit). While this dirty pointer magic works on little endian hosts,
it of course fails on big endian hosts. Fix it by using a proper helper
function instead.
Message-Id: <20230720175307.854460-1-thuth@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Type 13 is reserved, so using it should result in specification
exception. Due to an off-by-1 error the code triggers an assertion at a
later point in time instead.
Cc: qemu-stable@nongnu.org
Fixes: da4807527f ("s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
MC requires bit positions 8-11 (upper 4 bits of class) to be zeros,
otherwise it must raise a specification exception.
Cc: qemu-stable@nongnu.org
Fixes: 20d143e2ca ("s390x/tcg: Implement MONITOR CALL")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the mask is zero, access exceptions should still be recognized for
1 byte at the second-operand address. CC should be set to 0.
Cc: qemu-stable@nongnu.org
Fixes: e023e832d0 ("s390x: translate engine for s390x CPU")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CONVERT TO LOGICAL/FIXED deviate from IEEE 754 in that they raise an
inexact exception on out-of-range inputs. float_flag_invalid_cvti
aligns nicely with that behavior, so convert it to
S390_IEEE_MASK_INEXACT.
Cc: qemu-stable@nongnu.org
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the mask is zero, access exceptions should still be recognized for
1 byte at the second-operand address. CC should be set to 0.
Cc: qemu-stable@nongnu.org
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
R2 designates an even-odd register pair; the instruction should raise
a specification exception when R2 is not even.
Cc: qemu-stable@nongnu.org
Fixes: e023e832d0 ("s390x: translate engine for s390x CPU")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The previous check was failing with:
VLEN=128 ELEN = 64 SEW = 16 and LMUL = 1/8 which is a
valid combination.
Fix the check to allow valid combinations when VLEN is a multiple of
ELEN.
From the specification:
"In general, the requirement is to support LMUL ≥ SEWMIN/ELEN, where
SEWMIN is the narrowest supported SEW value and ELEN is the widest
supported SEW value. In the standard extensions, SEWMIN=8. For standard
vector extensions with ELEN=32, fractional LMULs of 1/2 and 1/4 must be
supported. For standard vector extensions with ELEN=64, fractional LMULs
of 1/2, 1/4, and 1/8 must be supported." Elsewhere in the specification
it makes clear that VLEN>=ELEN.
From inspection this new check allows:
VLEN=ELEN=64 1/2, 1/4, 1/8 for SEW >=8
VLEN=ELEN=32 1/2, 1/4 for SEW >=8
Fixes: d9b7609a1f ("target/riscv: rvv-1.0: configure instructions")
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230718131316.12283-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bd30559568 made changes in how we're checking and disabling
extensions based on env->priv_ver. One of the changes was to move the
extension disablement code to the end of realize(), being able to
disable extensions after we've auto-enabled some of them.
An unfortunate side effect of this change started to happen with CPUs
that has an older priv version, like sifive-u54. Starting on commit
2288a5ce43 we're auto-enabling zca, zcd and zcf if RVC is enabled,
but these extensions are priv version 1.12.0. When running a cpu that
has an older priv ver (like sifive-u54) the user is spammed with
warnings like these:
qemu-system-riscv64: warning: disabling zca extension for hart 0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart 0x0000000000000000 because privilege spec version does not match
The warnings are part of the code that disables the extension, but in this
case we're throwing user warnings for stuff that we enabled on our own,
without user intervention. Users are left wondering what they did wrong.
A quick 8.1 fix for this nuisance is to check the CPU priv spec before
auto-enabling zca/zcd/zcf. A more appropriate fix will include a more
robust framework that will account for both priv_ver and user choice
when auto-enabling/disabling extensions, but for 8.1 we'll make it do
with this simple check.
It's also worth noticing that this is the only case where we're
auto-enabling extensions based on a criteria (in this case RVC) that
doesn't match the priv spec of the extensions we're enabling. There's no
need for more 8.1 band-aids.
Cc: Conor Dooley <conor@kernel.org>
Fixes: 2288a5ce43 ("target/riscv: add cfg properties for Zc* extension")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20230717154141.60898-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In get_phys_addr_twostage() the code that applies the effects of
VSTCR.{SA,SW} and VTCR.{NSA,NSW} only updates result->f.attrs.secure.
Now we also have f.attrs.space for FEAT_RME, we need to keep the two
in sync.
These bits only have an effect for Secure space translations, not
for Root, so use the input in_space field to determine whether to
apply them rather than the input is_secure. This doesn't actually
make a difference because Root translations are never two-stage,
but it's a little clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-4-peter.maydell@linaro.org
In commit fe4a5472cc we rearranged the logic in S1_ptw_translate()
so that the debug-access "call get_phys_addr_*" codepath is used both
when S1 is doing ptw reads from stage 2 and when it is doing ptw
reads from physical memory. However, we didn't update the
calculation of s2ptw->in_space and s2ptw->in_secure to account for
the "ptw reads from physical memory" case. This meant that debug
accesses when in Secure state broke.
Create a new function S2_security_space() which returns the
correct security space to use for the ptw load, and use it to
determine the correct .in_secure and .in_space fields for the
stage 2 lookup for the ptw load.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-3-peter.maydell@linaro.org
Fixes: fe4a5472cc ("target/arm: Use get_phys_addr_with_struct in S1_ptw_translate")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add comments to the in_* fields in the S1Translate struct
that explain what they're doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230710152130.3928330-2-peter.maydell@linaro.org
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
GINVI and GINVT operations are supported on MIPS I6400 and I6500 cores,
so indicate that properly in CP0.Config5 register bits [16:15].
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630072806.3093704-1-marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction implements SAD (sum-absolute-difference) operation which
is used in motion estimation algorithms. The instruction handles four
8-bit data in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-34-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction shuffles 8 bytes in two registers by
one of 4 predefined patterns.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-33-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is used to parallel multiply and accumulate
four 8-bit data.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-32-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is used to determine sign of four 16-bit
packed data in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-31-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions do parallel quad 8-bit multiply and accumulate.
They are close to existing Q8MUL Q8MULSU so the generation
function modified to support all of them.
Also the patch fixes decoding of Q8MULSU according to tests on
hardware.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-30-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are:
- single 32-bit
- dual 16-bit packed
- quad 8-bit packed
conditional moves.
They are grouped in pool20 in the source code.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-29-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are counterparts for D32/Q16-SLL/SLR/SAR with
difference that the shift amount placed into GPR.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-28-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are same data shift in various directions, thus one
generation function is implemented for all three.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-27-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are same data shift in various directions, thus one
generation function is implemented for all three.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-26-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are dual 32-bit arithmetic shift right and
pack LSBs to 2x 16-bit into a MXU register.
The difference is the shift amount source: immediate or GP reg.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-25-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool16, see the grand opcode organization
tree on top of the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-24-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool15, see the grand opcode organization
tree on top of the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-23-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all load/store a halfword from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-22-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all load/store a byte from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-21-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 8-bit addition/subtraction in
various combinations. Most instructions are grouped in pool14,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-20-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 16-bit addition/subtraction in
various combinations. The instructions are grouped in pool13,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-19-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds two 32-bit values with respect
to corresponding carry flags in MXU_CR.
XRa += XRb + LeftCarry flag;
XRd += XRc + RightCarry flag;
Suddenly, it doesn't modify carry flags as a result of addition.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-18-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 32-bit addition/subtraction in
various combinations. The instructions are grouped in pool12,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-17-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts two 32-bit values in XRb and XRc.
Placing results in XRa and XRd and updates carry bits for each
path in the MXU control register.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-16-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts four 16-bit packed in XRb and XRc.
Placing packed 16-bit results in XRa and XRd.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-15-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-14-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-13-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are close to D16MAC so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-12-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool3, see the grand tree above
in the file.
The instructions are close to D16MUL so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-11-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool2, see the grand tree above
in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-10-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This instruction is used to add/subtract quadruple
8-bit values to another quadruple in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-9-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool1, see the grand tree above
in the file. Q8ADD is part of pool1 too but belong to another
category of instructions, thus will be made in later patches.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-8-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions were designed that they overwrite source
register during partial storing of result.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-7-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are used to set bits depending on
comparison result in each byte respectively.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-6-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to multiply 2x32-bit GPR sources & accumulate
result into 64-bit pair of XRF registers.
These instructions stain HI/LO registers with the final result.
Their opcode is close to the MIPS32R1 MADD[U]/MSUB[U], so it have to
call decode_opc_special2_legacy when failing to find MXU opcode.
Moreover, it solves issue with reinventing MUL and malfunction
MULU/CLZ/CLO instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-5-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to load from memory to GPR via indexed address
divided by base and index parts in GPR registers.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-4-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
XBurstR1 - is the MIPS32R1 CPU which aims to cover all Ingenic SoCs
older than JZ4770 and some newer.
XBurstR2 - is the MIPS32R2 CPU which aims to cover all Ingenic SoCs
starting from to JZ4770.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-3-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add support for emulating:
- S32LDDV and S32LDDVR
- S32STD and S32STDR
- S32STDV and S32STDVR
MXU instructions.
Add support for emulating MXU instructions with address register
post-modify counterparts:
- S32LDI and S32LDIR
- S32LDIV and S32LDIVR
- S32SDI and S32SDIR
- S32SDIV and S32SDIVR
Refactor support for emulating the S32LDD and S32LDDR instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-2-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.
Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.
Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previous implementation of MIPS cp0_timer computes a
cp0_count_ns based on input clock. However rounding
error of cp0_count_ns can affect precision of cp0_timer.
Using clock API and a divider for cp0_timer, so we can
use clock_ns_to_ticks/clock_ns_to_ticks to avoid rounding
issue.
Also workaround the situation that in such handler flow:
count = read_c0_count()
write_c0_compare(count)
If timer had not progressed when compare was written, the
interrupt would trigger again.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230521110037.90049-1-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The expression "imm * 2" in gen_ri2() can wrap around if imm is large
enough.
Fix by casting imm to int64_t, like it's done in disas_jdest().
Fixes: e8ecdfeb30 ("Fix EXECUTE of relative branches")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LRA should perform DAT regardless of whether it's on or off.
Disable DAT check for MMU_S390_LRA.
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-7-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a DAT error occurs, LRA is supposed to write the error information
to the bottom 32 bits of R1, and leave the top 32 bits of R1 alone.
Fix by passing the original value of R1 into helper and copying the
top 32 bits to the return value.
Fixes: d8fe4a9c28 ("target-s390: Convert LRA")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using a large R0 causes an assertion error:
qemu-s390x: target/s390x/tcg/mem_helper.c:183: access_prepare_nf: Assertion `size > 0 && size <= 4096' failed.
Even though PoP explicitly advises against using more than 8 bits for the
size, an emulator crash is never a good thing.
Fix by truncating the size to 8 bits.
Fixes: ea0a1053e2 ("s390x/tcg: Implement Miscellaneous-Instruction-Extensions Facility 3 for the s390x")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Protected Virtualization (PV) is not a real hardware device:
it is a feature of the firmware on s390x that is exposed to
userspace via the KVM interface.
Move the pv.c/pv.h files to target/s390x/kvm/ to make this clearer.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624200644.23931-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we don't set a proper cbom_blocksize|cboz_blocksize in the FDT the
Linux Kernel will fail to detect the availability of the CBOM/CBOZ
extensions, regardless of the contents of the 'riscv,isa' DT prop.
The FDT is being written using the cpu->cfg.cbom|z_blocksize attributes,
so let's expose them as user properties like it is already done with
TCG.
This will also require us to determine proper blocksize values during
init() time since the FDT is already created during realize(). We'll
take a ride in kvm_riscv_init_multiext_cfg() to do it. Note that we
don't need to fetch both cbom and cboz blocksizes every time: check for
their parent extensions (icbom and icboz) and only read the blocksizes
if needed.
In contrast with cbom|z_blocksize properties from TCG, the user is not
able to set any value that is different from the 'host' value when
running KVM. KVM can be particularly harsh dealing with it: a ENOTSUPP
can be thrown for the mere attempt of executing kvm_set_one_reg() for
these 2 regs.
Hopefully we don't need to call kvm_set_one_reg() for these regs.
We'll check if the user input matches the host value in
kvm_cpu_set_cbomz_blksize(), the set() accessor for both blocksize
properties. We'll fail fast since it's already known to not be
supported.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 places in which we need to get a pointer to a certain
property of the cpu->cfg struct based on property offset. Next patch
will add a couple more.
Create a helper to avoid repeating this code over and over.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're now ready to update the multi-letter extensions status for KVM.
kvm_riscv_update_cpu_cfg_isa_ext() is called called during vcpu creation
time to verify which user options changes host defaults (via the 'user_set'
flag) and tries to write them back to KVM.
Failure to commit a change to KVM is only ignored in case KVM doesn't
know about the extension (-EINVAL error code) and the user wanted to
disable the given extension. Otherwise we're going to abort the boot
process.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM-specific properties are being created inside target/riscv/kvm.c. But
at this moment we're gathering all the remaining properties from TCG and
adding them as is when running KVM. This creates a situation where
non-KVM properties are setting flags to 'true' due to its default
settings (e.g. Zawrs). Users can also freely enable them via command
line.
This doesn't impact runtime per se because KVM doesn't care about these
flags, but code such as riscv_isa_string_ext() take those flags into
account. The result is that, for a KVM guest, setting non-KVM properties
will make them appear in the riscv,isa DT.
We want to keep the same API for both TCG and KVM and at the same time,
when running KVM, forbid non-KVM extensions to be enabled internally. We
accomplish both by changing riscv_cpu_add_user_properties() to add a
mock boolean property for every non-KVM extension in
riscv_cpu_extensions[]. Then, when running KVM, users are still free to
set extensions at will, but we'll error out if a non-KVM extension is
enabled. Setting such extension to 'false' will be ignored.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_isa_string_ext() is being used by riscv_isa_string(), which is
then used by boards to retrieve the 'riscv,isa' string to be written in
the FDT. All this happens after riscv_cpu_realize(), meaning that we're
already past riscv_cpu_validate_set_extensions() and, more important,
riscv_cpu_disable_priv_spec_isa_exts().
This means that all extensions that needed to be disabled due to
priv_spec mismatch are already disabled. Checking this again during
riscv_isa_string_ext() is unneeded. Remove it.
As a bonus, riscv_isa_string_ext() can now be used with the 'host'
KVM-only CPU type since it doesn't have a env->priv_ver assigned and it
would fail this check for no good reason.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_user_properties() ended up with an excess of "#ifndef
CONFIG_USER_ONLY" blocks after changes that added KVM properties
handling.
KVM specific properties are required to be created earlier than their
TCG counterparts, but the remaining props can be created at any order.
Move riscv_add_satp_mode_properties() to the start of the function,
inside the !CONFIG_USER_ONLY block already present there, to remove the
last ifndef block.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's add KVM user properties for the multi-letter extensions that KVM
currently supports: zicbom, zicboz, zihintpause, zbb, ssaia, sstc,
svinval and svpbmt.
As with MISA extensions, we're using the KVMCPUConfig type to hold
information about the state of each extension. However, multi-letter
extensions have more cases to cover than MISA extensions, so we're
adding an extra 'supported' flag as well. This flag will reflect if a
given extension is supported by KVM, i.e. KVM knows how to handle it.
This is determined during KVM extension discovery in
kvm_riscv_init_multiext_cfg(), where we test for EINVAL errors. Any
other error will cause an abort.
The use of the 'user_set' is similar to what we already do with MISA
extensions: the flag set only if the user is changing the extension
state.
The 'supported' flag will be used later on to make an exception for
users that are disabling multi-letter extensions that are unknown to
KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230706101738.460804-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our design philosophy with KVM properties can be resumed in two main
decisions based on KVM interface availability and what the user wants to
do:
- if the user disables an extension that the host KVM module doesn't
know about (i.e. it doesn't implement the kvm_get_one_reg() interface),
keep booting the CPU. This will avoid users having to deal with issues
with older KVM versions while disabling features they don't care;
- for any other case we're going to error out immediately. If the user
wants to enable a feature that KVM doesn't know about this a problem that
is worth aborting - the user must know that the feature wasn't enabled
in the hart. Likewise, if KVM knows about the extension, the user wants
to enable/disable it, and we fail to do it so, that's also a problem we
can't shrug it off.
In the case of MISA bits we won't even try enabling bits that aren't
already available in the host. The ioctl() is so likely to fail that
it's not worth trying. This check is already done in the previous patch,
in kvm_cpu_set_misa_ext_cfg(), thus we don't need to worry about it now.
In kvm_riscv_update_cpu_misa_ext() we'll go through every potential user
option and do as follows:
- if the user didn't set the property or set to the same value of the
host, do nothing;
- Disable the given extension in KVM. Error out if anything goes wrong.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using all TCG user properties in KVM is tricky. First because KVM
supports only a small subset of what TCG provides, so most of the
cpu->cfg flags do nothing for KVM.
Second, and more important, we don't have a way of telling if any given
value is an user input or not. For TCG this has a small impact since we
just validating everything and error out if needed. But for KVM it would
be good to know if a given value was set by the user or if it's a value
already provided by KVM. Otherwise we don't know how to handle failed
kvm_set_one_regs() when writing the configurations back.
These characteristics make it overly complicated to use the same user
facing flags for both KVM and TCG. A simpler approach is to create KVM
specific properties that have specialized logic, forking KVM and TCG use
cases for those cases only. Fully separating KVM/TCG properties is
unneeded at this point - in fact we want the user experience to be as
equal as possible, regardless of the acceleration chosen.
We'll start this fork with the MISA properties, adding the MISA bits
that the KVM driver currently supports. A new KVMCPUConfig type is
introduced. It'll hold general information about an extension. For MISA
extensions we're going to use the newly created getters of
misa_ext_infos[] to populate their name and description. 'offset' holds
the MISA bit (RVA, RVC, ...). We're calling it 'offset' instead of
'misa_bit' because this same KVMCPUConfig struct will be used to
multi-letter extensions later on.
This new type also holds a 'user_set' flag. This flag will be set when
the user set an option that's different than what is already configured
in the host, requiring KVM intervention to write the regs back during
kvm_arch_init_vcpu(). Similar mechanics will be implemented for
multi-letter extensions as well.
There is no need to duplicate more code than necessary, so we're going
to use the existing kvm_riscv_init_user_properties() to add the KVM
specific properties. Any code that is adding a TCG user prop is then
changed slightly to verify first if there's a KVM prop with the same
name already added.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Next patch will add KVM specific user properties for both MISA and
multi-letter extensions. For MISA extensions we want to make use of what
is already available in misa_ext_cfgs[] to avoid code repetition.
misa_ext_info_arr[] array will hold name and description for each MISA
extension that misa_ext_cfgs[] is declaring. We'll then use this new
array in KVM code to avoid duplicating strings. Two getters were added
to allow KVM to retrieve the 'name' and 'description' for each MISA
property.
There's nothing holding us back from doing the same with multi-letter
extensions. For now doing just with MISA extensions is enough.
It is worth documenting that even using the __bultin_ctz() directive to
populate the misa_ext_info_arr[] we are forced to assign 'name' and
'description' during runtime in riscv_cpu_add_misa_properties(). The
reason is that some Gitlab runners ('clang-user' and 'tsan-build') will
throw errors like this if we fetch 'name' and 'description' from the
array in the MISA_CFG() macro:
../target/riscv/cpu.c:1624:5: error: initializer element is not a
compile-time constant
MISA_CFG(RVA, true),
^~~~~~~~~~~~~~~~~~~
../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG'
{.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
gcc and others compilers/builders were fine with that change. We can't
ignore failures in the Gitlab pipeline though, so code was changed to
make every runner happy.
As a side effect, misa_ext_cfg[] is no longer a 'const' array because
it must be set during runtime.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment we're retrieving env->misa_ext during
kvm_arch_init_cpu(), leaving env->misa_ext_mask behind.
We want to set env->misa_ext_mask, and we want to set it as early as
possible. The reason is that we're going to use it in the validation
process of the KVM MISA properties we're going to add next. Setting it
during arch_init_cpu() is too late for user validation.
Move the code to a new helper that is going to be called during init()
time, via kvm_riscv_init_user_properties(), like we're already doing for
the machine ID properties. Set both misa_ext and misa_ext_mask to the
same value retrieved by the 'isa' config reg.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After changing user validation for mvendorid/marchid/mimpid to guarantee
that the value is validated on user input time, coupled with the work in
fetching KVM default values for them by using a scratch CPU, we're
certain that the values in cpu->cfg.(mvendorid|marchid|mimpid) are
already good to be written back to KVM.
There's no need to write the values back for 'host' type CPUs since the
values can't be changed, so let's do that just for generic CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow 'marchid' and 'mimpid' to also be initialized in
kvm_riscv_init_machine_ids().
After this change, the handling of mvendorid/marchid/mimpid for the
'host' CPU type will be equal to what we already have for TCG named
CPUs, i.e. the user is not able to set these values to a different val
than the one that is already preset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Certain validations, such as the validations done for the machine IDs
(mvendorid/marchid/mimpid), are done before starting the CPU.
Non-dynamic (named) CPUs tries to match user input with a preset
default. As it is today we can't prefetch a KVM default for these cases
because we're only able to read/write KVM regs after the vcpu is
spinning.
Our target/arm friends use a concept called "scratch CPU", which
consists of creating a vcpu for doing queries and validations and so on,
which is discarded shortly after use [1]. This is a suitable solution
for what we need so let's implement it in target/riscv as well.
kvm_riscv_init_machine_ids() will be used to do any pre-launch setup for
KVM CPUs, via riscv_cpu_add_user_properties(). The function will create
a KVM scratch CPU, fetch KVM regs that work as default values for user
properties, and then discard the scratch CPU afterwards.
We're starting by initializing 'mvendorid'. This concept will be used to
init other KVM specific properties in the next patches as well.
[1] target/arm/kvm.c, kvm_arm_create_scratch_host_vcpu()
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'marchid' shouldn't be set to a different value as previously set for
named CPUs.
For all other CPUs it shouldn't be freely set either - the spec requires
that 'marchid' can't have the MSB (most significant bit) set and every
other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for
32 bit CPUs.
As with 'mimpid', setting a default value based on the current QEMU
version is not a good idea because it implies that the CPU
implementation changes from one QEMU version to the other. Named CPUs
should set 'marchid' to a meaningful value instead, and generic CPUs can
set to any valid value.
For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to
a different val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000:
Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000)
And, for generics CPUs, this is the error when trying to set to an
invalid val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000
qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000:
Unable to set marchid with MSB (64) bit set and the remaining bits zero
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the same logic used with 'mvendorid' let's also restrict
'mimpid' for named CPUs. Generic CPUs keep setting the value freely.
Note that we're getting rid of the default RISCV_CPU_MARCHID value. The
reason is that this is not a good default since it's dynamic, changing
with with every QEMU version, regardless of whether the actual
implementation of the CPU changed from one QEMU version to the other.
Named CPU should set it to a meaningful value instead and generic CPUs
can set whatever they want.
This is the error thrown for an invalid 'mimpid' value for the veyron-v1
CPU:
$ ./qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mimpid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mimpid=2:
Unable to change veyron-v1-riscv-cpu mimpid (0x111)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to change the handling of mvendorid/marchid/mimpid by the
KVM driver. Since these are always present in all CPUs let's put the
same validation for everyone.
It doesn't make sense to allow 'mvendorid' to be different than it
is already set in named (vendor) CPUs. Generic (dynamic) CPUs can have
any 'mvendorid' they want.
Change 'mvendorid' to be a class property created via
'object_class_property_add', instead of using the DEFINE_PROP_UINT32()
macro. This allow us to define a custom setter for it that will verify,
for named CPUs, if mvendorid is different than it is already set by the
CPU. This is the error thrown for the 'veyron-v1' CPU if 'mvendorid' is
set to an invalid value:
$ qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mvendorid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mvendorid=2:
Unable to change veyron-v1-riscv-cpu mvendorid (0x61f)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:
$ ./qemu/build/qemu-system-riscv64 \
-machine virt,accel=kvm -m 2G -smp 1 \
-nographic -snapshot -kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0
This happens because we're checking for priv spec for all CPUs, and
since we're not setting env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).
In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].
'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.
The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.
[1] lib/sbi/sbi_hart.c, hart_detect_features()
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Should set/get riscv all reg timer,i.e, time/compare/frequency/state.
Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).
The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfwma instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Print RvV extension register to log if VPU option is enabled.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629083730.386604-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pointer mask is also affected by MPRV which means cur_pmbase/pmmask
should also take MPRV into consideration. As pointer mask for instruction
is not supported currently, so we can directly update cur_pmbase/pmmask
based on address related mode and xlen affected by MPRV now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei
and ext_icsr from riscv_cpu_init(), the init() function of
TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force
CPUs to explictly enable all extensions and features it requires,
without any 'magic values' that were inherited by the parent type.
This commit failed to make appropriate changes in the 'veyron-v1' CPU,
added earlier by commit e1d084a852. The result is that the veyron-v1
CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the
case.
The reason why it took this long to notice (thanks LIU Zhiwei for
reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being
absent in the 'riscv,isa' DT, implying that they're both present if the
'i' extension is enabled. OpenSBI also doesn't error out or warns about
the lack of 'pmp', it'll just not protect memory pages.
Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like
7f0bdfb5bf already did with other CPUs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Fixes: 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SXL is initialized as env->misa_mxl which is also the mxl value.
So we can just remain it unchanged to keep it read-only.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MPV and GVA bits are added by hypervisor extension to mstatus
and mstatush (if MXLEN=32).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upon MRET or explicit memory access with MPRV=1, MPV should be ignored
when MPP=PRV_M.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch moves the extension test functions that are used
to gate vendor extension decoders, into cpu_cfg.h.
This allows to reuse them in the disassembler.
This patch does not introduce new functionality.
However, the patch includes a small change:
The parameter for the extension test functions has been changed
from 'DisasContext*' to 'const RISCVCPUConfig*' to keep
the code in cpu_cfg.h self-contained.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230612111034.3955227-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Disassemble function(plugin_disas, target_disas, monitor_disas) will
always call set_disas_info before disassembling instructions.
plugin_disas and target_disas will always be called under a TB, which
has the same XLEN.
We can't ensure that monitor_disas will always be called under a TB,
but current XLEN will still be a better choice, thus we can ensure at
least the disassemble of the nearest one TB is right.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction. We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESD instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESE instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split these helpers so that we are not passing 'decrypt'
within the simd descriptor.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDEC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDECLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENCLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not currently have a table in crypto/ for just MixColumns.
Move both tables for consistency.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit addresses a bug in the AVR interrupt handling code.
The modification involves replacing the usage of the ctz32 function
with ctz64 to ensure proper handling of interrupts above 33 in the AVR
target.
Previously, timers 3, 4, and 5 interrupts were not functioning correctly
because most of their interrupt vectors are numbered above 33.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: updated subject line to have subsytem prefix)
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
=8lDs
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-07-07:
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
# ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
# =8lDs
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 03:34:44 PM BST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu: (59 commits)
ppc/pnv: Add QME region for P10
target/ppc: Remove pointless checks of CONFIG_USER_ONLY in 'kvm_ppc.h'
target/ppc: Restrict 'kvm_ppc.h' to sysemu in cpu_init.c
target/ppc: Define TYPE_HOST_POWERPC_CPU in cpu-qom.h
target/ppc: Move CPU QOM definitions to cpu-qom.h
target/ppc: Reorder #ifdef'ry in kvm_ppc.h
target/ppc: Have 'kvm_ppc.h' include 'sysemu/kvm.h'
target/ppc: Machine check on invalid real address access on POWER9/10
tests/qtest: Add xscom tests for powernv10 machine
ppc/pnv: Set P10 core xscom region size to match hardware
ppc/pnv: Log all unimp warnings with similar message
ppc440_pcix: Rename QOM type define abd move it to common header
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc4xx_pci: Rename QOM type name define
ppc440_pcix: Stop using system io region for PCI bus
ppc440_pcix: Don't use iomem for regs
ppc/sam460ex: Remove address_space_mem local variable
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc440: Add busnum property to PCIe controller model
ppc440: Stop using system io region for PCIe buses
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GraniteRapids CPU model mainly adds the following new features
based on SapphireRapids:
- PREFETCHITI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
And adds the following security fix for corresponding vulnerabilities:
- MCDT_NO CPUID.(EAX=7,ECX=2):EDX[bit 5]
- SBDR_SSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 13]
- FBSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 14]
- PSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 15]
- PBRSB_NO MSR_IA32_ARCH_CAPABILITIES[bit 24]
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SapphireRapids has bit 13, 14 and 15 of MSR_IA32_ARCH_CAPABILITIES
enabled, which are related to some security fixes.
Add version 2 of SapphireRapids CPU model with those bits enabled also.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20230706054949.66556-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, bit 13, 14, 15 and 24 of MSR_IA32_ARCH_CAPABILITIES are
disclosed for fixing security issues, so add those bit definitions.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20230706054949.66556-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MCDT_NO bit indicates HW contains the security fix and doesn't need to
be mitigated to avoid data-dependent behaviour for certain instructions.
It needs no hypervisor support. Treat it as supported regardless of what
KVM reports.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.(EAX=7,ECX=2):EDX[bit 5] enumerates MCDT_NO. Processors enumerate
this bit as 1 do not exhibit MXCSR Configuration Dependent Timing (MCDT)
behavior and do not need to be mitigated to avoid data-dependent behavior
for certain instructions.
Since MCDT_NO is in a new sub-leaf, add a new CPUID feature word
FEAT_7_2_EDX. Also update cpuid_level_func7 by FEAT_7_2_EDX.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If FEAT_7_1_EAX is 0 and FEAT_7_1_EDX is non-zero, as is the case
with a Granite Rapids host and
'-cpu host,-avx-vnni,-avx512-bf16,-fzrm,-fsrs,-fsrc,-amx-fp16', we can't
get CPUID_7_1 leaf even though CPUID_7_1_EDX has non-zero value.
Update cpuid_level_func7 according to CPUID_7_1_EDX, otherwise
guest may report wrong maximum number sub-leaves in leaf 07H.
Fixes: eaaa197d5b ("target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration")
Cc: qemu-stable@nongnu.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-7-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
User emulation shouldn't need any of the KVM prototypes
declared in "kvm_ppc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-6-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TYPE_HOST_POWERPC_CPU is used in various places of cpu_init.c,
in order to restrict "kvm_ppc.h" to sysemu, move this QOM-related
definition to cpu-qom.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-5-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Keep a single if/else/endif block checking CONFIG_KVM.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-3-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
"kvm_ppc.h" declares:
int kvm_handle_nmi(PowerPCCPU *cpu, struct kvm_run *run);
'struct kvm_run' is declared in "sysemu/kvm.h", include it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc currently silently accepts invalid real address access. Catch
these and turn them into machine checks on POWER9/10 machines.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703120301.45313-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HID is a per-core shared register, skiboot sets this (e.g., setting
HILE) on one thread and that must affect all threads of the core.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently on PPC64 qemu always dumps the guest memory in
Big Endian (BE) format even though the guest running in Little Endian
(LE) mode. So crash tool fails to load the dump as illustrated below:
Log :
$ virsh dump DOMAIN --memory-only dump.file
Domain 'DOMAIN' dumped to dump.file
$ crash vmlinux dump.file
<snip>
crash 8.0.2-1.el9
WARNING: endian mismatch:
crash utility: little-endian
dump.file: big-endian
WARNING: machine type mismatch:
crash utility: PPC64
dump.file: (unknown)
crash: dump.file: not a supported file format
<snip>
This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode
to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode
always set for powerNV even though the guest is not running in hv mode.
The hv mode should be taken from msr_mask MSR_HVB bit
(cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing
MSR_HVB value to ppc_interrupts_little_endian() in order to determine
the guest endianness.
The crash tool also expects guest kernel endianness should match the
endianness of the dump.
The patch was tested on POWER9 box booted with Linux as host in
following cases:
Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest
Memory-Dump-Format
BE powernv(OPAL/PowerNV) LE
BE powernv(OPAL/PowerNV) BE
LE powernv(OPAL/PowerNV) LE
LE powernv(OPAL/PowerNV) BE
LE pseries(OPAL/PowerNV/pSeries) KVMHV LE
LE pseries TCG LE
Fixes: 5609400a42 ("target/ppc: Set the correct endianness for powernv memory
dumps")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 7a3fe174b1 removed usage of POWERPC_SYSCALL_VECTORED, drop
the unused define as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All powerpc exception handlers share some code when handling machine
check exceptions. Move this to a common function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CPUState is rarely needed by this function (only for logging a fatal
error) and it's easy to get from the env parameter so passing it
separately is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Several instructions and register access require icount reads and are
missing translator_io_start().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230625103700.8992-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TFMR is the Time Facility Management Register which is specific to
POWER CPUs, and used for the purpose of timebase management (generally
by firmware, not the OS).
Add helpers for the TFMR register, which will form part of the core
timebase facility model in future but for now behaviour is unchanged.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWER book4 (implementation-specific) SPRs are sometimes in their own
functions, but in other cases are mixed with architected SPRs. Do some
spring cleaning on these.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to generate TCG-specific decodetree files
when TCG is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230626140100.67941-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If you build QEMU with the clang sanitizer enabled, you can see it
fire when running the arm-cpu-features test:
$ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features
[...]
../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long'
[...]
This happens because the user can specify some incorrect SVE
properties that result in our calculating a max_vq of 0. We catch
this and error out, but before we do that we calculate
vq_mask = MAKE_64BIT_MASK(0, max_vq);$
and the MAKE_64BIT_MASK() call is only valid for lengths that are
greater than zero, so we hit the undefined behaviour.
Change the logic so that if max_vq is 0 we specifically set vq_mask
to 0 without going via MAKE_64BIT_MASK(). This lets us drop the
max_vq check from the error-exit logic, because if max_vq is 0 then
vq_map must now be 0.
The UB only happens in the case where the user passed us an incorrect
set of SVE properties, so it's not a big problem in practice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We already squash the ID register field for FEAT_SPE (the Statistical
Profiling Extension) because TCG does not implement it and if we
advertise it to the guest the guest will crash trying to look at
non-existent system registers. Do the same for some other features
which a real hardware Neoverse-V1 implements but which TCG doesn't:
* FEAT_TRF (Self-hosted Trace Extension)
* Trace Macrocell system register access
* Memory mapped trace
* FEAT_AMU (Activity Monitors Extension)
* FEAT_MPAM (Memory Partitioning and Monitoring Extension)
* FEAT_NV (Nested Virtualization)
Most of these, like FEAT_SPE, are "introspection/trace" type features
which QEMU is unlikely to ever implement. The odd-one-out here is
FEAT_NV -- we could implement that and at some point we probably
will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In handle_interrupt() we use level as an index into the interrupt_vector[]
array. This is safe because we have checked it against env->config->nlevel,
but Coverity can't see that (and it is only true because each CPU config
sets its XCHAL_NUM_INTLEVELS to something less than MAX_NLEVELS), so it
complains about a possible array overrun (CID 1507131)
Add an assert() which will make Coverity happy and catch the unlikely
case of a mis-set XCHAL_NUM_INTLEVELS in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20230623154135.1930261-1-peter.maydell@linaro.org
This code is only relevant when TCG is present in the build. Building
with --disable-tcg --enable-xen on an x86 host we get:
$ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen
$ make -j$(nproc)
...
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr':
../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr'
../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr'
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg':
../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control'
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230628164821.16771-1-farosas@suse.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike architectures with precise self-modifying code semantics
(e.g. x86) ARM processors do not maintain coherency for instruction
execution and memory, requiring an instruction synchronization
barrier on every core that will execute the new code, and on many
models also the explicit use of cache management instructions.
While this is required to make JITs work on actual hardware, QEMU
has gotten away with not handling this since it does not emulate
caches, and unconditionally invalidates code whenever the softmmu
or the user-mode page protection logic detects that code has been
modified.
Unfortunately the latter does not work in the face of dual-mapped
code (a common W^X workaround), where one page is executable and
the other is writable: user-mode has no way to connect one with the
other as that is only known to the kernel and the emulated
application.
This commit works around the issue by telling software that
instruction cache invalidation is required by clearing the
CPR_EL0.DIC flag (regardless of whether the emulated processor
needs it), and then invalidating code in IC IVAU instructions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Högberg <john.hogberg@ericsson.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht
[PMM: removed unnecessary AArch64 feature check; moved
"clear CTR_EL1.DIC" code up a bit so it's not in the middle
of the vfp/neon related tests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always print each matrix row whole, one per line, so that we
get the entire matrix in the proper shape.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the line length to extend to 548 columns. While annoyingly wide,
it's still less confusing than the continuations we print. Also, the
default VL used by Linux (and max for A64FX) uses only 140 columns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some registers whose 'cooked' writefns induce TLB maintenance do
not have raw_writefn ops defined. If only the writefn ops is set
(ie. no raw_writefn is provided), it is assumed the cooked also
work as the raw one. For those registers it is not obvious the
tlb_flush works on KVM mode so better/safer setting the raw write.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
The ptw code is accessed by non-TCG code (specifically arm_pamax and
arm_cpu_get_phys_page_attrs_debug) but most of it is really only for
TCG emulation. Seeing as we already assert for a non TARGET_AARCH64
build lets extend the test rather than further messing with the ifdef
ladder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-19-alex.bennee@linaro.org>
When we generate code for guest loads and stores, at the moment they
end up being requests for a host-endian access. So for target-system-nios2
(little endian) a load like
ldw r3,0(r4)
results on an x86 host in the TCG IR
qemu_ld_a32_i32 r3,loc2,al+leul,0
but on s390 it is
qemu_ld_a32_i32 r3,loc2,al+beul,0
The result is that guests don't work on big-endian hosts.
Use the MO_TE* memops rather than the plain ones.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1693
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230623172556.1951974-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The standard floating point results are provided by the generic routine.
We only need handle the extra Z flag result afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230527141910.1885950-5-richard.henderson@linaro.org>
For the most part we can use the new generic routine,
though exceptions need some post-processing to sort
invalid from integer overflow.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230527141910.1885950-4-richard.henderson@linaro.org>
* Fix backwards time with -icount auto
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSdRiQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqcwf9FGAqZ+0V34Y8XeXMu8Es3bFjEKG8
t3BpVNhTBOYDPvpshnPVx2I29nRT2opc1C4YkjMAv5/1nivj1kDM7hDObOSJQvqy
5FgTsJYqRtGj+J7uVBrspWZsP8BYeykKmXR6deBOPvCuw5nnLdDQ3dLV2F26lKUu
lsFyEVbi4dzf8+TVuNIXEg7mVBYytjBQwBmmHgeOofeikjq9WEudr49mwJMCHyzl
iXCatnctXGKZYSnp+eHIBiFRdSzjqdgrDRa0ysSqABoBI1pmkhyQKSay6cSjfG4n
gFlqPF/i9RqAWpsQrM1IMGgPK39SrT2dYlHDJV2P/NEQrS6kLh2HoW/ArQ==
=oj3B
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Make named CPU models usable for qemu-{i386,x86_64}
* Fix backwards time with -icount auto
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSdRiQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqcwf9FGAqZ+0V34Y8XeXMu8Es3bFjEKG8
# t3BpVNhTBOYDPvpshnPVx2I29nRT2opc1C4YkjMAv5/1nivj1kDM7hDObOSJQvqy
# 5FgTsJYqRtGj+J7uVBrspWZsP8BYeykKmXR6deBOPvCuw5nnLdDQ3dLV2F26lKUu
# lsFyEVbi4dzf8+TVuNIXEg7mVBYytjBQwBmmHgeOofeikjq9WEudr49mwJMCHyzl
# iXCatnctXGKZYSnp+eHIBiFRdSzjqdgrDRa0ysSqABoBI1pmkhyQKSay6cSjfG4n
# gFlqPF/i9RqAWpsQrM1IMGgPK39SrT2dYlHDJV2P/NEQrS6kLh2HoW/ArQ==
# =oj3B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 Jun 2023 10:51:48 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386: emulate 64-bit ring 0 for linux-user if LM feature is set
target/i386: ignore CPL0-specific features in user mode emulation
target/i386: ignore ARCH_CAPABILITIES features in user mode emulation
target/i386: Export MSR_ARCH_CAPABILITIES bits to guests
icount: don't adjust virtual time backwards after warp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features such as PCID are only accessible through privileged operations,
and therefore have no impact on any user-mode operation. Allow reporting
them to programs running under user mode emulation, so that "-cpu" can be
used with more named CPU models.
XSAVES would be similar, but it doesn't make sense to provide it until
XSAVEC is implemented.
With this change, all CPUs up to Broadwell-v4 can be emulate. Skylake-Client
requires XSAVEC, while EPYC also requires SHA-NI, MISALIGNSSE and TOPOEXT.
MISALIGNSSE is not hard to implement, but I am not sure it is worth using
a precious hflags bit for it.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARCH_CAPABILITIES is only accessible through a read-only MSR, so it has
no impact on any user-mode operation (user-mode cannot read the MSR).
So do not bother printing warnings about it in user mode emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Intel CPUs there are certain bits in MSR_ARCH_CAPABILITIES that
indicates if the CPU is not affected by a vulnerability. Without these
bits guests may try to deploy the mitigation even if the CPU is not
affected.
Export the bits to guests that indicate immunity to hardware
vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Message-ID: <63d85cc76d4cdc51e6c732478b81d8f13be11e5a.1687551881.git.pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add MEMORY_LISTNER_PRIORITY_MIN for the symbolic value for the min value of
the memory listener instead of the hard-coded magic value 0. Add explicit
initialization.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <29f88477fe82eb774bcfcae7f65ea21995f865f2.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory
listener to replace the hard-coded value 10 for accel.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
003f230e37 ("machine: Tweak the order of topology members in struct
CpuTopology") changes the meaning of MachineState.smp.cores from "the
number of cores in one package" to "the number of cores in one die"
and doesn't fix other uses of MachineState.smp.cores. And because of
the introduction of cluster, now smp.cores just means "the number of
cores in one cluster". This clearly does not fit the semantics here.
And before this error message, WHvSetPartitionProperty() is called to
set prop.ProcessorCount.
So the error message should show the prop.ProcessorCount other than
"cores per cluster" or "cores per package".
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230529124331.412822-1-zhao1.liu@linux.intel.com>
[PMD: Use '%u' format for ProcessorCount]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Restrict the KVM timer migration state. Rename the KVM timer
post_load() handler accordingly, because cpu_post_load() is
too generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230626232007.8933-3-philmd@linaro.org>
The 'kvm_sw_tlb' and 'tlb_dirty' fields introduced in commit
93dd5e852c ("kvm: ppc: booke206: use MMU API") are specific
to KVM and shouldn't be accessed when it is not available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230624192645.13680-1-philmd@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-8-philmd@linaro.org>
"kvm_arm.h" contains external and internal prototype declarations.
Files under the hw/ directory should only access the KVM external
API.
In order to avoid machine / device models to include "kvm_arm.h"
simply to get the QOM GIC/ITS class name, un-inline each class
name getter to the proper device model file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-4-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState.
Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'.
Use the generic 'accel' field of CPUState instead of 'hvf'.
Replace g_malloc0() by g_new0() for readability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-17-philmd@linaro.org>
Most of the codebase uses 'CPUState *cpu' or 'CPUState *cs'.
While 'cpu_state' is kind of explicit, it makes the code
harder to review. Simply rename as 'cs'.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-16-philmd@linaro.org>
No need for this helper to access the CPUState::accel field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-15-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Rename WHPX 'whpx_vcpu' as 'AccelCPUState'; use
the typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-14-philmd@linaro.org>
No need for this helper to access the CPUState::accel field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-12-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Rename NVMM 'qemu_vcpu' as 'AccelCPUState'; directly
use the typedef, remove unnecessary casts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-11-philmd@linaro.org>
hThread variable is only used by the HAX accelerator,
so move it to the accelerator specific context.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-9-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Start with the HAX context, renaming its forward
declarated structure 'hax_vcpu_state' as 'AccelCPUState'.
Document the CPUState field. Directly use the typedef.
Remove the amusing but now unnecessary casts in NVMM / WHPX.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-8-philmd@linaro.org>
All accelerators will share a single opaque context
in CPUState. Start by renaming 'hax_vcpu' as 'accel'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-7-philmd@linaro.org>
When the vCPU thread finished its processing, destroy
it and signal its destruction to generic vCPU management
layer.
Add a sanity check for the vCPU accelerator context.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-6-philmd@linaro.org>
hThread is only used on the error path in hax_kick_vcpu_thread().
Fixes: b0cb0a66d6 ("Plumb the HAXM-based hardware acceleration support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-5-philmd@linaro.org>
On Windows hosts, cpu->hThread is assigned but never accessed:
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-4-philmd@linaro.org>
Since MinGW commit 395dcfdea ("rename hyper-v headers and def
files to lower case") [*], WinHvPlatform.h and WinHvEmulation.h
got respectively renamed as winhvplatform.h / winhvemulation.h.
The mingw64-headers package included in the Fedora version we
use for CI does include this commit; and meson fails to detect
these present-but-renamed headers while cross-building (on
case-sensitive filesystems).
Use the renamed header in order to detect and successfully
cross-build with the WHPX accelerator.
Note, on Windows hosts, the libraries are still named as
WinHvPlatform.dll and WinHvEmulation.dll, so we don't bother
renaming the definitions used by load_whp_dispatch_fns() in
target/i386/whpx/whpx-all.c.
[*] https://sourceforge.net/p/mingw-w64/mingw-w64/ci/395dcfdea
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230624142211.8888-3-philmd@linaro.org>
We incorporate %asi into tb->flags so that we may generate
inline code for the many ASIs for which it is easy to do so.
Setting %asi is common for e.g. memcpy and memset performing
block copy and clear, so it is worth noticing this case.
We must end the TB but do not need to return to the main loop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-9-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
After the register window unwind, this is for a plain indirect
branch with no further side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-8-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is for a plain indirect branch with no other side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-7-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When resolving JUMP_PC, we know this is for a plain branch
with no other side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-6-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Create a new artificial "next pc" which also indicates
that nothing has changed within the cpu state which
requires returning to the main loop.
Pipe this new value though all pc/npc checks.
Do not produce this new value yet.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230628071202.230991-5-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Let the compiler decide about inlining.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-4-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
During translation, npc == address, DYNAMIC_PC, or JUMP_PC.
It is only the encoding between here and sparc_restore_state_to_opc
that considers JUMP_PC to be a bit within a larger value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-3-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-2-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The microblaze architecture does not reorder instructions.
While there is an MBAR wait-for-data-access instruction,
this concerns synchronizing with DMA.
This should have been defined when enabling MTTCG.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Fixes: d449561b13 ("configure: microblaze: Enable mttcg")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
=WHE2
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* kvm: reuse per-vcpu stats fd to avoid vcpu interruption
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
# EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
# B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
# dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
# 3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
# 5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
# =WHE2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:24:34 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
git-submodule.sh: allow running in validate mode without previous update
target/i386: implement SYSCALL/SYSRET in 32-bit emulators
target/i386: implement RDPID in TCG
target/i386: sysret and sysexit are privileged
target/i386: AMD only supports SYSENTER/SYSEXIT in 32-bit mode
target/i386: Intel only supports SYSCALL/SYSRET in long mode
target/i386: TCG supports WBNOINVD
target/i386: TCG supports XSAVEERPTR
target/i386: do not accept RDSEED if CPUID bit absent
target/i386: TCG supports RDSEED
target/i386: TCG supports 3DNow! prefetch(w)
target/i386: fix INVD vmexit
kvm: reuse per-vcpu stats fd to avoid vcpu interruption
hw/riscv: Validate cluster and NUMA node boundary
hw/arm: Validate cluster and NUMA node boundary
numa: Validate cluster and NUMA node boundary if required
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
build: further refine build.ninja rules
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A relatively simple case to begin with, CTRL is a SMT shared register
where reads and writes need to synchronise against state changes by
other threads in the core.
Atomic serialisation operations are used to achieve this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TGC SMT emulation needs to know whether it is running with SMT siblings,
to be able to iterate over siblings in a core, and to serialise
threads to access per-core shared SPRs. Add infrastructure to do these
things.
For now the sibling iteration and serialisation are implemented in a
simple but inefficient way. SMT shared state and sibling access is not
too common, and SMT configurations are mainly useful to test system
code, so performance is not to critical.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: fix build breakage with clang ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top bits of the LEV field of the sc instruction are to be treated as
as a reserved field rather than a reserved value, meaning LEV is
effectively the bottom bit. LEV=0xF should be treated as LEV=1 and be
a hypercall, for example.
This changes the instruction execution to just set lev from the low bit
of the field. Processors which don't support the LEV field will continue
to ignore it.
ISA v3.1 defines LEV to be 2 bits, in order to add the 'sc 2' ultracall
instruction. TCG does not support Ultravisor, so don't worry about
that bit.
Suggested-by: "Harsh Prateek Bora" <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The CTRL register is able to write the bit in the RUN field, which gets
reflected into the TS field which is read-only and contains the state of
the RUN field for all threads in the core.
TCG does not implement SMT, so the correct implementation just requires
mirroring the RUN bit into the first bit of the TS field.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
System call interrupts in ISA v3.1 CPUs add a LEV indication in SRR1
that corresponds with the LEV field of the instruction that caused the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The hypervisor emulation assistance interrupt modifies HEIR to
contain the value of the instruction which caused the exception.
Only TCG raises HEAI interrupts so this can be made TCG-only.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 introduced prefix instructions. Among the changes, various
synchronous interrupts report whether they were caused by a prefix
instruction in (H)SRR1.
The case of instruction fetch that causes an HDSI due to access of a
process-scoped table faulting on the partition scoped translation is the
tricky one. As with ISIs and HISIs, this does not try to set the prefix
bit because there is no instruction image to be loaded. The HDSI needs
the originating access type to be passed through to the handler to
distinguish this from HDSIs that fault translating process scoped tables
originating from a load or store instruction (in that case the prefix
bit should be provided).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch issues ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rather than always performing partition scope page table translation
with access type of 0 (MMU_DATA_LOAD), pass through the processor
access type which first initiated the translation sequence. Process-
scoped page table loads are then set to MMU_DATA_LOAD access type in
the xlate function.
This will allow more information to be passed to the exception
handler in the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap
after cpu_ldl_code(). This corrects DSISR bits in alignment
interrupts when running in little endian mode.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the Timer Control and Timer Status registers are modified, avoid
calling the KVM backend when not available
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure each CPU gets its state set up for gdb, not just the ones
before PowerPCCPUClass has had its gdb state set up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nicholas Piggin