RAM to do so, which I agonized over for about a week, but I feel it's
a fairly good tradeoff for the features we get. Eventually, I may come
up with a more accurate phosphor mode which eliminates this approach
entirely.
Reverted OpenGL framebuffer to 32-bit colour mode. We're using Blargg
effects, so we may as well get the full fidelity out of it. Besides,
testing has shown that there's not much speed difference between 16
and 32 bit modes, making me think that 16-bit is probably be swizzled
to 32-bit anyway.
Bumped release date to June 1, version to rc1.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2501 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
for phosphor effects. It's just not ready to go yet, more research is
needed, and I just don't have the time to fix it. Besides, it's been
two months since the last release, and I need a vacation.
Because of this, the release date is changed to May 25.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2494 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
instead of the entire area. This fixes the speed regression from 3.6,
since the main TIA texture is now larger than before. Previously it
was 160 pixels wide out of 256 total (rounded to power of two), now
it's 560 wide out of 1024 total. In 3.6 it was updating a buffer 256
pixels wide, in the latest beta releases it was sending 4 times as
much data (256 -> 1024). Now it sends only 160/560. Similar
improvements happened with the height as well (210 lines vs 256).
On my test systems at least, this is an extremely large win,
resulting in similar speeds as 3.6 even though we've moved to a 32-bit
framebuffer.
Bumped version # for next beta release.
Pushed release date to June 1, to make absolutely sure I have
everything fixed and ready to go.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2493 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
now load and play test ROMs, complete with emulation of timing delays
due to slow accesses on real Harmony hardware. Still TODO is the tunes,
DPC+ stuff, which is stubbed out at this point.
Fixed bug in EFSC bankswitching; state files didn't contain extended RAM
information.
Cleaned up the Serializer API, resulting in slightly faster operation
and smaller state files. Because of this, the state file format
has changed for this release (old state files will no longer work).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2487 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
instead of having different keys to turn them on and off separately.
This brings the functionality in line with the rest of the objects/
collision key-combos, which were also toggle-only.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2449 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
SDL keyboard events and the static GetKeyState() method doesn't always
work as you'd expect.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2447 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
fixing bugs too numerous to mention. The end result is that using
Control-0 to switch between mouse modes is much more understandable.
Updated properties database for Telepathy ROM, which now uses the
MindLink controller. Also updated Astroblast ROMs to use paddles
by default.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2444 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
bankswitch scheme (currently, only the 256 internal RAM is used).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2439 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
only Bionic Breakthrough ever used this scheme, not Mind Maze and
Telepathy (as the properties database previously indicated).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2429 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
and use keys on a real keyboard more effectively.
Bumped version number, so we start all over again.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2426 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
normal control functions (ie, pressing Ctrl-q will not quit, but send
this combo directly to CompuMate).
Mapped Func-Space to the Backspace key for CompuMate keyboard.
Func-space (which is actually Ctrl-space is still supported).
Updated documentation for CompuMate changes and system requirements.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2418 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
z26 code never actually implemented this, so I'm not sure how people
actually entered Basic code. I guess not many people have played
with and tested this before.
Added more sensible keys for the CompuMate 'space' and 'enter' keys.
They're still mapped to '/' and ';' respectively (to keep locations
on the keyboard the same), but are also mapped to the actual 'Space'
and 'Enter' keys (to make usage much easier). I'll probably also
map 'Shift-;' to Backspace as well.
Updated documentation for CompuMate emulation.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2415 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
shifted keys from the keyboard. Most control-keys are
supported too, but still TODO is allow the Control key to
pass to the CompuMate controller and not pre-process it
by the EventHandler (so pressing Ctrl-q) shouldn't quit
emulation in that case).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2414 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
events generated by one device would never receive the 'turn off'
event when it was swapped out.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2407 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
for analog pins 4 and 9 was swapped.
Renamed various 'Fire' button events to prevent the above problem
from happening again.
In BoosterGrip games, the right mouse button now sends the 'booster'
event, allowing one to play Omega Race fully with the mouse.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2405 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
buttons use the mouse left/right buttons, respectively.
Updated changelog and documentation.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2373 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
debugger before it has been initialized.
Tweaked the format auto-detection by also looking at the TIA scanline
at which drawing first occurs.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2359 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
separately to different paddles.
Updated documentation for impending 3.5 release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2296 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
when it isn't needed. According to SDL this shouldn't be necessary, but
some combinations of video modes and audio hardware cause sound to stop
working if it's repeatedly opened and closed. So we have to keep it open.
Always attempt to use 2 channels (aka stereo) when opening the SDL audio
device. This is now required, since ROMs can request mono or stereo mode,
and the sound system can no longer be closed and re-opened with the
desired settings. So we need to always use 2 channels to accommodate
when it might be needed. This actually more closely emulates the 2600,
which does have two audio channels. The 'mono' vs 'stereo' ROM property
basically controls whether these channels are exposed (ie, does the
virtual console have two-channel audio hardware installed). In that sense,
these settings control how the channels are mixed.
Updated some settings to have more reasonable defaults.
Added acknowledgement for people that have donated hardware to help with
development.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2291 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
saved per device, so that unplugging and replugging a joystick won't cause
the previous mappings to be lost.
All attributes of a joystick (ie, number of sticks, number of axes, buttons,
hats on each stick) are dynamic, meaning that hardcoded values are no
longer used, making the handling more robust.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2285 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
desktop on OSX and Windows, and the home directory in Linux.
The associated commandline has been changed to 'snapdir'.
Added 'GL VBO' toggle button to the Video Settings UI, and in
general cleaned up its interface.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2282 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Blargg NTSC filtering, but we need to revert to base functionality first.
Cleaned up the debugger API wrt converting values from integers to strings
(and vice-versa). There is now only one method for each of these functions,
rather than several ways to do so. In the process, convert from unsafe
sprintf functions into snprintf (eliminate potential buffer overflows).
The debugger 'print' command now indicates if any assigned label represents
a read-only location (R), a write-only location (W), or a read/write location
(R/W).
Fixed bug in DataGridWidgets (used in debugger ROM and CPU registers), where
scrolling the mouse-wheel would cause a segfault. Scrolling the mousewheel
now changes these items as expected.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2260 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
contents. The file was being accessed and read, but the commands it contained
weren't being executed! This bug appeared in April 2010, so it looks like
not many people are using this feature (or at least they're not reporting it).
Cleaned up a few compiler warnings in DebuggerParser class.
Bumped version # for beta release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2254 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Fixed bug in handling analog axes with jitter; they were overriding events from
digital, hat and keyboard input.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2251 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
stephena