Commit Graph

380 Commits

Author SHA1 Message Date
gigaherz c0f9d1b619 SPU2-X: Added audio expansion support to the portaudio backend. This change also corrects the volume in normal stereo mode.
Removed an useless method from the module interfaces.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4858 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-10 13:17:41 +00:00
gigaherz a22b36815c SPU2-X: kill a few warnings
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4857 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-10 11:59:08 +00:00
gregory.hainaut@gmail.com b490282c55 spu2x: linux compilation fix
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4856 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-08 17:49:59 +00:00
gigaherz 224797c4ec SPU2-X: Experimental change! Lowered the lower latency limit to 3ms if the timestretcher is not being used. This latency will add up to the output latency as usual, but with a good sound chip this should allow overall latencies < 15ms.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4854 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-08 15:56:49 +00:00
gigaherz f2bc219425 SPU2-X: Removed the std::vector I used out of lazyness. The config dialog should no longer keep an ever-growing list of devices, and it has less potential side-effects if somehow the portaudio device list changes while the dialog is open.
3rdparty/portaudio: Removed debug prints on release targets.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4853 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-08 13:59:19 +00:00
gigaherz a5638b1466 SPU2-X: Added configuration dialog for the portaudio backend (windows only).
Added settings for customizing the suggested latency.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4852 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-08 12:49:33 +00:00
gigaherz 44f0cc140a SPU2-X / portaudio: Fix the requested latency from a hardcoded 200ms to "as close as you can to 64 samples / buffer".
Causes internal buffer size allocations to be as small as possible within portaudio and the OS, so it can have bad effects if the number turns out to be too small.
Would be nice if someone with a "real" audio card (Audigy, X-fi or similar) tested WASAPI Exclusive Mode, KS or ASIO with this change.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4851 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-07 16:37:59 +00:00
avihal ddcfdb6d77 Test. Dummy commit.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4849 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-07 09:33:27 +00:00
avihal@gmail.com 529f620e37 SPUX: New stretcher: Should be slightly more stable now, compared to r4840.
On 4840 I added dynamic tuning (which may have slight negative effect on stability) to adapt to different iterations/sec of different systems, but I didn't like this system too much. On 4840 I also made a small change which, I now understand, factors out the differences between systems in this regard, essentially making dynamic tuning not required anymore. So now dynamic tuning is disabled.

If you enable the SPU2X messages (and the overrun messages), you would see log messages similar to this:

buffers:   44 ms ( 89%), tempo: 1.000000, comp: 1.000, iters: 764, (N-IPS:750 -> avg:50, minokc:50, div:100)

If the iters value (764 at this example) on your system when running at 100% speed (50/60fps) is higher than 1000 or lower than 500, then please comment here and post few of the log lines.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4843 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-04 18:21:32 +00:00
avihal@gmail.com fc359249e4 SPU2X: Better control of debug messages. (Now they actually print when enable at the SPU2X debug GUI).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4842 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-04 16:51:59 +00:00
ramapcsx2 0a4c082e4b SPU2-X: Clean up some logging code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4841 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-04 14:27:21 +00:00
avihal@gmail.com 36fc051238 SPU2X: New stretcher: hopefully works better than r4834 (same goals as r4834: better resiliance to very high/low fps, compared to r4820).
I'm not fully happy with it, as it's a bit complicated for my taste, so feedback about how it performs will be appreciated.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4840 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-08-02 18:48:48 +00:00
avihal@gmail.com 92e67c218a SPU2X: New time stretcher: Improved behavior on extremes.
1. Much better behavior at extreme low/high FPS (less skips/lower latency).
2. As a result, I was able to reduce internal latency by 50% (50ms config now equals 100ms before).

Recommended latency config for stretcher: 100ms.
For rhythm games, if your FPS is very stable, I recommend 50ms.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4834 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-31 11:27:50 +00:00
cottonvibes c05dc759e3 Big gif transfer code rewrite!
Pcsx2 now has a gifUnit class which acts like the ps2's gif and executes a single gif transfer at a time (and performs path arbitration according to priority and path3 slicing).

This new code is generally a speedup for most games. Particularly VU heavy games like GoW.
This revision breaks old saved state compatibility so don't update if you wish to keep playing with your old saved states.
Leave comments if this revision fixes or breaks anything...

Message to GS Plugin authors:
This new code now uses only 1 gif callback to transfer data to the gs plugin (GSgifTransfer).
pcsx2 also is garaunteed to send full GS primitives to the plugin. So you don't have to account for partial-transfers anymore.

Thanks goes out to shadowlady who tested around 500 games for me :D

Note 1: The old gif code is still in this revision, and can be enabled by the USE_OLD_GIF macro. The old code will be deleted soon.
Note 2: This revision also enables assertion dialogs in devel builds, and changed a lot of assume cases into assertions.


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4821 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-24 13:02:50 +00:00
avihal@gmail.com 7cb4dbb8d9 SPU2X: New (simpler) time stretcher algorithm.
Should prevent erratic tempo variations near 100% speeds (compared to the previous implementation), and generally allow much lower latencies while keeping the audio stable (on all audio systems).
E.g. my tests show that at 70ms latency it can properly handle sharp speed variance of 50%-100%. If your game generally doesn't get slower than 70% speed, 50ms latency would probably be fine.

Note that on extreme scenarios (e.g. extreme sharp drops in speed) it doesn't try to keep the audio continues at all costs. If your game exhibits such behavior (audible clicks, etc), increasing the latency a bit at the config would help.

Comments on actual performance/quality on different systems would be greatly appreciated.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4820 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-24 10:58:42 +00:00
gregory.hainaut@gmail.com 5adba505e7 pcsx2, zzogl-pg: allow to change some default path with compilation flags.
cmake: Add PLUGIN_DIR and GAMEINDEX_DIR options to easily select install directory. Install GameIndex.dbt during install phase.


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4811 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-17 11:25:17 +00:00
arcum42 465dbc9203 SPU2-X: Fix the linux version, and add a checkbox for the de-alias filter.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4810 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-17 02:38:18 +00:00
shadowladyngemu a88863ada2 SPU2-X:
Adding an option for the de-alias filter implemented in r4118,
currently overemphasizes the highs so it's disabled by default
but I like it for some games :P

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4809 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-16 12:41:29 +00:00
gregory.hainaut@gmail.com 83b3ac85d3 cmake:
* use the standard 3 step flow: cmake, make, make install
* Remove L10N_PORTABLE option, superseeded by PACKAGE_MODE
* Extend PACKAGE_MODE to select the install directory (FHS or local bin)


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4805 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-07-14 09:02:37 +00:00
gregory.hainaut@gmail.com 9cb19121e0 onepad: create a key_status object to handle key activities with a single press/release interface
GSdx: remove some linux dialog options which were already controlled by PCSX2


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4780 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-28 21:30:06 +00:00
ramapcsx2 73b46c4b7d SPU2-X: Version bump.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4779 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-27 22:54:25 +00:00
sudonim1@gmail.com 2a73457b4b SPU2-X: Apply Neill's recommended 2/3 multiplier to the input. The results still are not like on the PS2, but we're now as good as Neill's research allows. We'll have to do our own from here on.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4778 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-27 17:17:29 +00:00
gigaherz 99ee4a8df4 SPU2-X: Updated the spu2replay engine so it works again. Windows-only still, and it lacks a proper gui, but it can be used to dump the actions the game is doing and replay them later without the rest of the emulator.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4777 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 23:45:58 +00:00
ramapcsx2 5677ed5661 SPU2-X: Forgot to bump the savestate version.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4776 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 19:43:21 +00:00
ramapcsx2 6d9c794a63 SPU2-X: Short term reverb quality hack (half the input volume), until we settle for smth.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4775 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 19:28:58 +00:00
sudonim1@gmail.com aaf8f9067a SPU2-X: Extra clamping. I think we used to have this and it was taken out to try to boost the reverb.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4774 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 17:48:59 +00:00
sudonim1@gmail.com 6b1136df4e SPU2-X: shifting some code around in the effects engine, any change in output is probably a bug.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4773 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 17:46:57 +00:00
sudonim1@gmail.com 367ab01a60 SPU2-X: We had two SPDIF modes reversed. I don't really understand the SPDIF modes but these are the bits the library sets. Fixes Gradius 3+4, issue 925.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4771 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 15:43:38 +00:00
sudonim1@gmail.com 8c781f9845 SPU2-X: More parens needed, always more!
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4770 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 14:03:27 +00:00
sudonim1@gmail.com 27e9b57fed SPU2-X: Another error in the bitshifts, not sure if it's mine or older.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4769 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 14:01:33 +00:00
sudonim1@gmail.com 244f16c57a SPU2-X: Removed reference to x86emitter as we don't seem to use it any more (some brief optimisation experiment a while ago?)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4768 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 13:40:14 +00:00
ramapcsx2 b26f787e22 SPU2-X:
Removed the fake reverb since the real stuff started to work :)

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4767 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 13:24:22 +00:00
sudonim1@gmail.com 2bb7704fbd SPU2-X: I was being silly, those -1s are unnecessary (I was thinking we were downcasting for some reason).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4765 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 02:08:51 +00:00
sudonim1@gmail.com c22e933f5e SPU2-X: Tried to fix the incorrect bitshifts back from when Neill's code was optimised while the registers were broken so it wasn't testable. My maths is probably off, the code needs reviewing. The "- 1"s are so that -1 * -1 = just short of 1 instead of -1 (overflow).
With this, reverb maybe sounds somewhat like the PS2 for the first time ever!?

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4764 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 01:34:41 +00:00
sudonim1@gmail.com 43fba9aab8 SPU2-X: Oops, I'm the one who spotted this when we were discussing it too.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4763 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-25 00:12:31 +00:00
sudonim1@gmail.com 373c2cd47f SPU2-X: Reverted back to the last version of the reverb engine before the rewrite plus some backwards lerp fixes (accident in optimisation in r2089). Thanks to gigaherz (I guess? This is mostly your fault.)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4762 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-24 23:55:19 +00:00
sudonim1@gmail.com 297843ddaf SPU2-X: Both cores now (ignore previous commit)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4761 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-24 23:09:45 +00:00
sudonim1@gmail.com 86763c806f SPU2-X: The reverb registers in the register pointer table are inconsistent with the register definitions, they have always been inconsistent, everything we have done to fix reverb was invalid because of this. Not sure where we go from here.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4760 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-24 22:46:53 +00:00
sudonim1@gmail.com c509e2afb7 SPU2-X: Testing showed that writing effect area registers is not entirely ineffective as previously assumed while effect area writing is enabled on that core. The new assumption is that internal registers reflect the values of the external ones while effect area writing is disabled. Also increased logging level of these registers.
Save state compatibility broken.

Fixes issue 796, grandia 3 noise before squenix logo.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4759 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-24 18:41:56 +00:00
sudonim1@gmail.com 73b97e74d4 SPU2-X: If a bit we don't understand goes high, clear a register we don't understand. Don't ask me, but it seems to make the BIOS happier and Devil May Cry works again.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4758 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-23 20:14:01 +00:00
sudonim1@gmail.com ddaea35d6e SPU2-X: Bump savestate version since I broke compatibility with r4754
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4756 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-22 11:49:49 +00:00
sudonim1@gmail.com 9e34391cde SPU2-X: Refix Zero: Akai Chou (and others fixed in r4735 probably). It was a slip in the dead voice code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4755 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-22 11:42:56 +00:00
sudonim1@gmail.com 629a6826d2 SPU2-X: Quality fix (?): take crest value to mean the electronics definition and clamp modulated pitch to [0,0x3fff] on the basis that the SPU2 probably is incapable of decoding two words of samples for each voice in each tick. Honestly this is still guessing, we only really know that it was wrong.
Test FFX tone when it's your turn to act, FFX underwater music?, xenosaga movie skipping sound effect, god knows what else.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4754 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-22 02:27:39 +00:00
sudonim1@gmail.com eba05e18c2 SPU2-X: Fix minor register logging bug (probably not the only bug in this code)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4753 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-22 00:04:00 +00:00
sudonim1@gmail.com 9dd3cf8078 SPU2-X: Improved (hopefully to perfection) the reporting of NAX by moving code around in the decoder. Fixes Magic Pengel, hopefully no regressions (but it does intentionally change when some IRQs fire a bit so there might be some, but if so this is a step towards fixing other finicky games).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4752 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-21 22:29:59 +00:00
gregory.hainaut@gmail.com d968362961 cmake: * improve gtk hack to be compatible with previous cmake version.
* Add some number to the plugin .so file.


git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4751 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-20 18:09:32 +00:00
ramapcsx2 f60012a209 SPU2-X: Version bump.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4747 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-16 16:59:48 +00:00
sudonim1@gmail.com b16629acc9 SPU2-X: Change initial IRQA value, fixes F1 2005. This is a weird one, read the long comment.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4746 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-15 18:01:04 +00:00
sudonim1@gmail.com 86b80f2603 SPU2-X: Little mistake in input area IRQ code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4745 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-15 16:24:42 +00:00
sudonim1@gmail.com 94d6aaf4bb SPU2-X: Flag effect area for updating on effect area register writes rather than core attributes change. (For change in testing. Committing separately for regression testing purposes.)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4744 96395faa-99c1-11dd-bbfe-3dabce05a288
2011-06-15 00:57:04 +00:00