051c5c4bf7
gsdx sw x64: small stack optimization on linux
...
mov with the stack pointer require less bytecode
2016-11-19 17:00:32 +01:00
141c9e9c86
gsdx sw x64: prefer faster 32 bits operation when possible
2016-11-19 17:00:32 +01:00
a281bda9a6
gsdx sw x64: port the scanline generator on AVX
...
Based on Gabest's work.
* Miss mipmap
Note: dithering info
It is a bit tricky as a2 on linux was rdx register which overlap with fzm (dh/dl)
It might require dedicated windows code
2016-11-19 17:00:32 +01:00
8e29e09943
gsdx sw x64: update setup prim generator x64 SSE&AVX
2016-11-19 17:00:32 +01:00
4a47224ac1
gsdx: define the linux x64 ABI
2016-11-19 17:00:32 +01:00
e31ce87bb3
gsdx: SW JIT debug helper
...
Allow to compare 32/64 bits (and all ISAs too)
Allow to breakpoint (int3)
Print selector info
Print size of buffer and start (disabled by default)
2016-11-19 17:00:32 +01:00
633f7a1db9
xbyak: add int3 instruction
...
Very useful to stop the JIT
2016-11-19 17:00:32 +01:00
43b4cfc215
gsdx: separate dump directory for 32/64 bits
2016-11-19 17:00:32 +01:00
82d12691e1
gsdx: properly check SSE support
...
1/ Check all "levels"
2/ requires AVX for 64 bits
2016-11-19 17:00:32 +01:00
8db9a27970
fix2
2016-11-14 13:55:55 +01:00
d1788ac1e9
fix
2016-11-13 10:56:35 +01:00
de8d3fb1eb
LilyPad: Add PS mouse support
...
Adds Playstation Mouse as a new pad type.
For use with PS1 games only.
2016-11-13 01:23:59 +01:00
a3478e02f4
LilyPad: Add tooltips ( #1653 )
...
Adds informational tooltips to several UI options.
2016-11-12 23:52:56 +00:00
f513ca2a28
cdvdgigaherz:linux: Check ioctl return value
...
Fixes Coverity CID 172718: Unchecked return value
Also avoid adding the sector leadout descriptor info to the TOC since it
actually isn't used.
2016-11-12 23:28:17 +00:00
49d5c4260f
gsdx state: post fix depth tracing
...
The main FindMinMax methods is perf critical so instead I created a separate function
to ensure the constness of the depth
Fix letter regression on Xenosaga3
2016-11-11 23:39:34 +01:00
1530effb29
gsdx: Catch bad_alloc exceptions
2016-11-09 22:41:02 +00:00
ae6f26f3ef
gsdx: Skip texture cache read if any dimension is 0
...
Fixes a crash at the PSX logo if either the DX9 or DX11 hardware
renderer is used.
2016-11-09 22:39:53 +00:00
f3e1ba5251
onepad gui: always assume rumble is supported on the GUI
...
close #1497
2016-11-08 21:23:56 +01:00
31b32d3b11
gsdx linux: don't require to hit enter for Texture Offset text entry
...
close #1292
2016-11-08 20:28:42 +01:00
ed3052dea5
gsdx: remove various assertion
...
Useless or wrong assertion
2016-11-08 18:58:10 +01:00
a283e95fed
cmake: Add cdvdgigaherz and dependencies
...
Only new dependency is libudev.
2016-11-07 00:08:23 +00:00
16b6cc41a4
cdvdgigaherz:linux: Add config and GUI code
2016-11-07 00:08:23 +00:00
747f4dc3fe
cdvdgigaherz:linux: Add initial IOCtlSrc implementation
2016-11-07 00:08:23 +00:00
f13f50779c
cdvdgigaherz: Export plugin interface when using gcc/clang
2016-11-07 00:08:23 +00:00
363b581926
cdvdgigaherz: ifdef Windows specific stuff
2016-11-07 00:08:23 +00:00
1573f513ce
cdvdgigaherz: Move lba_to_msf to header
...
Also use proper inline keyword.
2016-11-07 00:08:23 +00:00
ae0577bc16
cdvdgigaherz: Fix write-strings warnings
...
Too bad I can't change PS2Edef.h to use a const char*.
Also remove SVN_MOD ifdef from version string.
2016-11-07 00:08:23 +00:00
cccf216dbb
cdvdgigaherz: Use C++11 threads instead of Win32 threads
2016-11-07 00:08:23 +00:00
d872c0560a
cdvdgigaherz: Use unique_ptr for src
2016-11-07 00:08:23 +00:00
f8f79788e4
cdvdgigaherz: Use condition variables for event waiting
...
Also use atomics for thread exit variables.
2016-11-07 00:08:23 +00:00
f678ff8cfd
cdvdgigaherz: Replace critical section with mutex
2016-11-07 00:08:23 +00:00
b1850f2465
cdvdgigaherz: Move dllmain to a Windows only file
2016-11-07 00:08:23 +00:00
d7866831ae
cdvdgigaherz: Use Unicode on Windows
2016-11-07 00:08:23 +00:00
5917bf31c3
cdvdgigaherz: Remove old config code
2016-11-07 00:08:23 +00:00
59247c7838
cdvdgigaherz: Switch to using the new settings system
...
Also refactor the default drive selection and GUI code so optical drive
detection is shared.
Note: This breaks the current config, but there's only one setting
anyway.
2016-11-07 00:08:23 +00:00
dce3c57e6a
cdvdgigaherz: Add portable setting class
...
Can load/save inis (though functionality is very basic).
2016-11-07 00:08:23 +00:00
9c440ab6b7
cdvdgigaherz: Use bool return for ReadSectors*
...
More readable.
2016-11-07 00:08:23 +00:00
fc085c1758
cdvdgigaherz: Improve IOCtlSrc::ReadSectors2048
...
Don't use a RAW_READ_INFO struct when only the LARGE_INTEGER member is
used. Use SetFilePointerEx which is slightly simpler and doesn't require
checking GetLastError() in some circumstances to check whether the read
has actually failed.
Also use a mutex to prevent simultaneous access from both the read
thread and the keepalive thread to prevent overlapping SetFilePointerEx
calls from causing the wrong data to be read.
And print error messages should a failure occur.
2016-11-07 00:08:23 +00:00
fdd6ea3651
cdvdgigaherz: Simplify SetSpindleSpeed
...
Also set the max drive speed to 4x DVD and 24xCD (down from 8x DVD and
36x CD) - it seems to reduce pausing slightly since the drive doesn't
require as much time to spin up to the desired speed.
2016-11-07 00:08:23 +00:00
1834b7d0f9
cdvdgigaherz: Get disc info when disc is first ready
...
Also set the disc speed at the correct time - CDROM SET SPEED only stays
in effect till the disc is removed.
Also fix a memleak in CDVDopen when the drive cannot be accessed.
2016-11-07 00:08:23 +00:00
95b98c5a38
cdvdgigaherz: Use a formatted TOC instead of a raw TOC
...
It's simpler and provides almost the same information. The only
information that might be lost is the first track specific track type.
2016-11-07 00:08:23 +00:00
327515366f
cdvdgigaherz: Don't calculate the track length
...
Not really necessary.
Also fix 2 off-by-ones.
2016-11-07 00:08:23 +00:00
1f60e3101e
cdvdgigaherz: Reduce disc info ioctl calls
...
It's rather unnecessary to use the same ioctls multiple times per disc
when the info returned doesn't change. Just use each ioctl once and
read/calculate all the necessary info all at onace.
This also fixes an issue where the IOCTL_DVD_START_SESSION ioctl is
repeatedly used if the returned session ID is 0. The previous code
assumed that 0 was not a valid session ID and would repeatedly use the
ioctl to obtain a non-zero session ID. However, 0 is a valid session ID,
and it seems IOCTL_DVD_START_SESSION can repeatedly return a 0 session
ID even if the corresponding IOCTL_DVD_END_SESSION has not been called.
In our case, a DVD session is only necessary for DVD detection and
reading the physical format information. This fix seems to alter drive
speed behaviour.
2016-11-07 00:08:23 +00:00
f8e474a1c5
cdvdgigaherz: s/device/m_device/
2016-11-07 00:08:23 +00:00
8f11049c9f
cdvdgigaherz: Remove non-SPTI raw sector reading code
...
There doesn't seem to be any issues calling CreateFile with
GENERIC_WRITE access (which is necessary for SPTI) on a standard user
account, so the SPTI code should work in all cases.
2016-11-07 00:08:23 +00:00
f314c2a4d9
cdvdgigaherz: Simplify Q subchannel relative offset calculation
...
That way there's no need to calculate the track length for each track.
2016-11-07 00:08:23 +00:00
5d90afe648
LilyPad: Add separate bindings for each pad type ( #1609 )
...
Adds separate bindings for each of the pad types (DualShock2,
Guitar,Pop'n Music). This allows the user to change the button
configuration to better suit the Guitar and Pop'n Music pads without
messing up the bindings already setup for the DS2.
Close #1576 .
2016-11-06 21:59:19 +00:00
5ff9e94a2e
gsdx linux: align mipmapping gui option on Windows
2016-11-06 16:39:40 +01:00
107251e099
gsdx: sort crc game list
2016-11-06 16:30:51 +01:00
1547dd4215
GSDX-UI: Add Mipmap combobox
...
Mipmapping is now supported on hardware renderers thanks to Gregory. Please report any observed hardware mipmapping issues on the forums (http://forums.pcsx2.net/Thread-New-feature-Needs-testing-GSdx-HW-mode-Experimental-mipmap-support ) as potentially the HW mipmap code might still have some bugs.
2016-11-05 22:19:32 +05:30
58ed49f3c9
GSDX: Clean up warnings on MSVC
...
* Explicitly cast w_pages and h_pages into uint32.
* Prevent signed/unsigned comparison by converting lod into unsigned integer, honestly how coud a mipmapping level be negative?
2016-11-05 10:28:04 +01:00
758cf25888
gsdx: wrap bp for block ptr
...
Fix massive flickering of Beyond Good&Evil on SW renderer (HW happily overflow)
2016-11-04 23:03:12 +01:00
3d65312999
gsdx hw: remove old assert
...
Code is working fine with all formats
2016-11-04 23:02:49 +01:00
437afbbbf3
GSDX-PCRTC: Move Saturation hack to displayrect()
...
Fixes custom resolution scaling on Tribes aerial assault.
2016-11-01 17:54:46 +01:00
b871c6b46f
GSDX-TextureCache: Generalize scaling equation
...
Previously the dedicated custom resolution scaling equation was ignored for the second SetScale() call, generalizing the equations will also fix the DMC scaling issue on custom resolution. Also remove unnecessary checks for null on scale factors. The possibility for having a null scale factor value only exists on custom resolution and it will only happen on cases where the output circuit isn't ready yet. So the ideal way would be to handle all the required conditions of output circuit on "m_renderer->CanUpscale()" itself.
2016-11-01 17:54:46 +01:00
055f236aa5
GSVector: Add constructor to dispatch same values
2016-11-01 17:54:46 +01:00
aa4b2d9f3a
gsdx sw: wrap GS memory
...
Cost ought to remain small. Worst case is 2 extra "and" operation by group of pixels in scanline renderer
I think PixelAddressN functions are mostly call in the init.
2016-11-01 13:33:11 +01:00
233f66db5e
Fixed effects area wrapping calculation, which was always buggy but this
...
wasn't evident until additional addresses were precalculated.
Not expected to improve compatibility.
2016-11-01 11:12:41 +00:00
ba557e20a4
gsdx:recorder:unix: Fix thread leaking
2016-10-28 18:33:50 +01:00
7ab5cb20c8
gsdx: Don't close threads twice
...
CloseThread is called in the GSJobQueue destructor, so don't call it
again in the GSThread destructor.
Fixes #392 , which was caused by a use after free.
Also prevents pthread_join() from being called twice for each thread
on non-Windows operating systems, which is undefined behaviour.
2016-10-28 18:33:35 +01:00
bc7aa1a500
spu2-x:freebsd: Enable SDL backends
...
portaudio currently isn't providing me with sound, even though it did
before.
2016-10-27 22:03:49 +01:00
86a6f5d67c
cdvdgigaherz: s/itob/dec_to_bcd/
...
There's no need to have 2 ways to convert a u8 to a binary coded
decimal. Remove the macro version.
2016-10-26 22:11:40 +01:00
852ed21e88
cdvdgigaherz: Remove no drive support
...
It's the same as "No disc" or having no disc in the drive.
2016-10-26 17:30:28 +01:00
c023d7676a
cdvdgigaherz: Remove Source base class
...
Also remove virtuals from IOCtlSrc.
2016-10-26 17:30:27 +01:00
9f6c6d9917
cdvdgigaherz: Don't use GetFileSizeEx to get disk size
...
It doesn't seem to work for disks, and IOCTL_DISK_GET_LENGTH_INFO
usually succeeds instead.
2016-10-26 17:30:23 +01:00
9c643ae9ca
cdvdgigaherz: Remove CDVDabout and SysMessage
...
It's not accessible from PCSX2. More importantly, I don't want to port
it.
2016-10-26 17:30:21 +01:00
fb3580efa1
cdvdgigaherz: Remove unneeded code
2016-10-26 17:30:16 +01:00
5dfb7d63dc
gsdx: wrap gs page/block instead to skip them
...
Fix FMV of Thrillville when coupled with wrap_gs_mem = 1
2016-10-25 22:49:05 +02:00
db4b4fb166
gsdx ogl: keep a separate log for sw
2016-10-25 22:00:41 +02:00
cedc8aae44
gsdx: implement a shared memory to emulate the wrapping of the gs memory
...
Code can be enabled with "wrap_gs_mem = 1". Code only allow a single shared memory but
I don't think we need more anyway.
Linux only, Kernel panic expected with the HW renderer.
Fix FMV on Silent Hill 3 with the SW renderer
2016-10-25 20:29:38 +02:00
42b51611af
gsdx: don't dump debug file if not requested
2016-10-25 17:10:57 +02:00
820462dbc0
Merge pull request #1635 from sudonim1/reverb
...
SPU2-X: Reverb rewrite
2016-10-24 17:17:48 +01:00
e80ca0fa92
gsdx ogl: of course some driver don't work with GL_ARB_enhanced_layouts
...
Windows and (AMD or Intel)
2016-10-23 12:48:23 +02:00
885ef7a46f
gsdx ogl: reduce complexity of driver detection
2016-10-23 12:43:50 +02:00
565cb70875
gsdx ogl: don't request arb_texture_barrier for the SW renderer
...
Allow[1] to use the mesa software emulated driver to test EGL.
[1] also need export MESA_EXTENSION_OVERRIDE="GL_ARB_buffer_storage"
2016-10-23 12:13:57 +02:00
1668392988
SPU2-X: Mass reverb register renaming. Hopefully I didn't screw up the
...
cross-channel reflection registers.
2016-10-22 19:16:11 +01:00
9a51820dec
SPU2-X: Experimental reverb based on Dr. Hell's
...
http://drhell.web.fc2.com/ps1/ and/or Martin Korth's
http://problemkaputt.de/psx-spx.htm reverse engineering.
Negate final reverb output (don't know why but it's an
improvement when comparing the waveform).
2016-10-22 19:16:11 +01:00
01f0f436ac
gsdx linux replayer: allow to repack gs dump
...
linux_replay = -N will save N first frames to a new gs dump
Save disk space & debug time
2016-10-22 13:22:28 +02:00
99c43881df
gsdx egl: report an error if we fail to bind the openGL API
...
It seems Nvidia added openGL support in 355 (whereas I have 352 on debian).
I don't know the status on AMD.
2016-10-22 13:22:28 +02:00
d4a163e9cc
spu2: improve format consistency
2016-10-22 13:22:28 +02:00
1f44c4be2f
SPU2-X: PSX games should be able to read ENDX correctly now, which is
...
important functionality for many sound engines.
Fixed two other obvious errors in the psx compatibility merge, probably
inconsequential.
2016-10-20 04:17:03 +01:00
8fdf973e66
gsdx glsl: add basic support of GL_ARB_enhanced_layouts (GL4.4)
...
Hardcode location of interface to the location 0. If I understand the
spec correctly (unlikely), variable in interface will get successive
location.
Goal is to reduce driver work. Instead to compute some location based on
name matching approach (and silly validation), the driver can now use
static allocation.
Tests on future Mesa 13 are welcome
2016-10-19 23:03:39 +02:00
b1f2d27ddf
gsdx: move Haunting Ground CRC to dx level
2016-10-19 21:10:44 +02:00
264b764d6e
gsdx tc: improve haunting ground hack to remove the bloom effect
...
Just clear the buffer. The generic solution will be a copy from buffer A
to buffer B But it requires
1/ a big buffer A (otherwise it would overflow)
2/ a line width rescaling (+ the upscaling mess support)
2016-10-19 19:31:32 +02:00
c2cf8e528c
gsdx ogl: tekken5: only trigger channel effect shader when frame buffer is a single page
...
Fix missing model regression.
2016-10-17 19:34:55 +02:00
604d3bac3c
clang format: set SpacesBeforeTrailingComments to 1
2016-10-16 21:42:31 +02:00
8945ace3f7
GSDX-UI: Remove Trilinear options at some cases
...
Currently the Trilinear option only works on OpenGL. Remove it from combobox when other renderers are used.
2016-10-16 17:36:30 +01:00
45be4626f6
GSDX: Add an enum for texture filtering
...
Also re-order the combobox to make it look consistent with the tooltip description.
2016-10-16 17:36:30 +01:00
cc4cc342c2
gsdx hw: add a special sub target invalidation for haunting ground
...
Fix a wrong blending/blooming
Based on CRC to reduce impact on others games (speed)
2016-10-16 17:32:57 +02:00
31248da3d1
gsdx sw: Fix 16 bits date test on SSE build
...
AVX Builds were fixed in this commit a1a842b07f
2016-10-16 16:48:23 +02:00
defdd27987
gsdx: set m_nativeres to true in replayer
...
Otherwise you can't compare draw call between native and upscaled
2016-10-16 16:48:23 +02:00
f5e096a66f
spu2x: indicate pitch modulation and noise enabled status in the visual debugger
2016-10-16 14:15:12 +02:00
c284459382
gsdx tc: allow to search old depth/color in texture cache
...
But give higher priority to recent buffer.
Fix cut scene issue in Jak II (and potentially various game when EE/VU hacks are used)
2016-10-15 18:08:00 +02:00
7bb201a1d2
gsdx tc: move code to allow to lookup an older target if none was found
...
Next step is to enable it by uncommenting line 452
2016-10-14 22:03:29 +02:00
24684033ca
gsdx: enable clut_load_before_draw option on Harley Davidson (CRC hack)
...
At least the game is good until we find how the HW really behave
2016-10-14 20:47:18 +02:00
2c0a4ac906
gsdx ogl: add an extra debug log level
...
Avoid too much log
2016-10-14 20:46:58 +02:00
3c30db965d
gsdx gui: add a combo box on linux (below Interlace)
...
3 states are off/half/full. I'm too lazy to create a better combo box.
The hack option will be removed when Windows GUI is ready
2016-10-14 19:26:58 +02:00
37a1230c01
gsdx: reduce code duplication for key event
2016-10-14 19:26:58 +02:00
a4658eac24
gsdx hw: allow overlapping of texture (alpha) and framebuffer (RGB)
...
Fix HUD on Berserk
v2: use fbmask instead of hacking the target format to 24 bits.
2016-10-14 19:26:27 +02:00
25e76d0564
gsdx ogl: use an invalid value for stencil state
...
Fix shadow in WWE Smackdown Vs Raw 2006
2016-10-14 19:01:18 +02:00
Gregory Hainaut