Reformatted fx files that were causing issues on certain text editors. They should now display correctly in those editors.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5897 96395faa-99c1-11dd-bbfe-3dabce05a288
Also removed the fallback recovery ps, and replaced the compile fail catch to a simple console print. Which I think is safer, and faster.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5894 96395faa-99c1-11dd-bbfe-3dabce05a288
UserHacks_AlphaStencil will take precedence on override_GL_ARB_shader_image_load_store
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5891 96395faa-99c1-11dd-bbfe-3dabce05a288
Note: DATE is used for shadows (persona 3) and others effect
You can disable it when you disable gl image extension (override_GL_ARB_shader_image_load_store = 0)
You can also enable it on AMD too (set it to 1 this time) but no guarantee.
If you feel the extension is too slow, you can try disable some gl barrier (aka "damn the torpedo full steam ahead!").
It can be done with the option UserHacks_DateGL4 = 1. Otherwise just disable the extension.
Note: don't enable UserHacks_AlphaStencil in the same time. GL_ARB_shader_image_load_store is an alternative implementation.
Enabling both in the same time will lead to undefined (well surely wrong) behavior.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5890 96395faa-99c1-11dd-bbfe-3dabce05a288
* properly detect gl nv depth extension
* Always show the hack on the gui. Add a new hack option for DATE (gl4.2) only
* Save the scan mode on linux too (f7)
* hopefully fix some crash on some drivers... (ensure aligment 256 bits alignment, and if not use std memcpy)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5888 96395faa-99c1-11dd-bbfe-3dabce05a288
Also disabled the gsdx AF options for the OGL renderer (because it's not implemented for that yet).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5881 96395faa-99c1-11dd-bbfe-3dabce05a288
Fixes a small oversight on my part. Which was setting the maximum anisotropy to (0,1,2,3,4) respectively, instead of (1,2,4,8,16). So when you selected x16 for example, you were actually only getting x4 >.>
Corrected now, and you will be getting the full x16 when selected :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5879 96395faa-99c1-11dd-bbfe-3dabce05a288
Adds anisotropic texture filtering (1x-16x) to the hardware settings. Enhances the visual quality of textures that are at oblique viewing angles.
Anisotropic filtering is automatically disabled if: 8-bit textures are enabled.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5878 96395faa-99c1-11dd-bbfe-3dabce05a288
As before: use the hotkey(f7) to switch between them. It will now save the chosen scanline effect, instead of always defaulting to disabled, on load.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5874 96395faa-99c1-11dd-bbfe-3dabce05a288
* gui refresh
+ Use some tab to reduce heigth for small screen
+ Add logz option
+ remove broken/experimental keyword. GSdx ogl is not too bad ;)
* autodetect GL_NV_depth_buffer_float
Linux tester you are welcome!
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5862 96395faa-99c1-11dd-bbfe-3dabce05a288
Best setting if you driver support GL_NV_depth_buffer_float => GL_NV_Depth = 1 & logz = 0
Otherwise => GL_NV_Depth = 0 & logz = 1
Explanation of the bug:
Dx z position ranges from 0.0f to 1.0f (FS ranges 0.0f to 1.0f)
GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)
Why it sucks:
GS small depth value will be "mapped" to -1.0f. In others all small values will be 1.0f! Terrible lost
of accuraccy.
The GL_NV_depth_buffer_float extension allow to set the near plane as -1.0f.
So
"GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)"
will become
"GL z Position ranges from -1.0f to 1.0f (FS ranges -1.0f to 1.0f)"
and therefore
"z posision [0.0f;1.0f] will map to FS [0.0f;1.0f]" as DX
Yes we just get back all precision lost previously :)
However you need hardware (intel?) and driver support (free driver?/gles?) :(
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5860 96395faa-99c1-11dd-bbfe-3dabce05a288
* use same path as game index db for cheats and cheats_ws
* install the new cheat zip file on cmake and debian installer
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5850 96395faa-99c1-11dd-bbfe-3dabce05a288
This fixes the crashes on F9 for me. We don't want to call GSgetTitleInfo2() when GSOpen() isn't finished yet.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5834 96395faa-99c1-11dd-bbfe-3dabce05a288
HTB123 on our forums came up with a hack that removes the broken main character shadow in hardware rendering
in SMT Nocturne.
This should work for all GSdx recognized versions / regions of the game (tested EU and NTSC-U).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5819 96395faa-99c1-11dd-bbfe-3dabce05a288
* restore the old fxaa (Asmodeam will be integrated when I got time)
* port the recently added new scanline algo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5818 96395faa-99c1-11dd-bbfe-3dabce05a288
Add another scanline algorithm, made by pseudonym. This one is pretty fancy, using a cosinus function for generating the dark lines.
It only works on unscaled output, so use software rendering or native resolution for hardware.
It's an effect that works best on 240p converted games (like the SNES titles in Mega Man Collection).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5812 96395faa-99c1-11dd-bbfe-3dabce05a288
Finish up my scanlines attempt. Now the 2 old shaders are back in and all 3 cycle on F7.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5809 96395faa-99c1-11dd-bbfe-3dabce05a288
Slight adjustments to positions in the GUI also (OCD'd the spacing a little :P)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5796 96395faa-99c1-11dd-bbfe-3dabce05a288
- FXAA shader replaced by Asmodeans shader suite 'PCSX2 Fx 2.00 Revised'.
This is an entire enhancement suite with many configurable options like FXAA, texture sharpening
or lighting tweaks. Some of the effects are pretty advanced so kudos to him allowing it to be integrated with GSdx! :)
Note that there's no interface for the tweaks yet. Until those are done, the defaults will be used.
Release thread here: http://forums.pcsx2.net/Thread-Custom-Shaders-for-GSdx?pid=334766#pid334766
- Disabled an option from the widescreen patches for SH:Shattered Memories.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5793 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to control the gl dectection from the gui (+1 for the user-friendliness ;) )
* disable geometry shader by default on Intel driver
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5783 96395faa-99c1-11dd-bbfe-3dabce05a288
Added a check box and config code for the fxaa shader.
It's not currently hooked up since the shader setup might get replaced in a day or two.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5777 96395faa-99c1-11dd-bbfe-3dabce05a288
Added a simple scanlines filter (2nd one activated by F7). No tweaking done yet.
It shows how to get scanlines that aren't affected by input resolution or scaling.
A good next step would be determining the exact number of dark lines to show :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5770 96395faa-99c1-11dd-bbfe-3dabce05a288
Removed some missing headers from the vs2010 and vs2012 project files that were causing vs to always claim the projects were out of date.
Also removed some other entries for c/cpp files that were disabled but also missing (I did not search exhaustively).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5763 96395faa-99c1-11dd-bbfe-3dabce05a288
(Did this through the google code file editing so if it's broken i apologise :P )
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5762 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to use more subroutine on VS&PS, unfortunately hit a driver crash!
* Call Attach/DetachContext through GSDevice so I can unmap currently mapped buffer
* Implement glsl part of GL_ARB_bindless texture, again hit another driver crash!
* various fix of GL_ARB_buffer_storage. Basic benchmark show only improvement on 'cold' case, I guess it will improve smoothness
* try to fix GL_clear_texture, no success so far. It seem the extension is limited to basic texture (aka no depth/stencil)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5752 96395faa-99c1-11dd-bbfe-3dabce05a288
Performance note, it might be faster to replace the MODULO with an AND. Not sure on the impact
for the new time stretcher algo.
GSdx: fixed use-after-free (linux)
PCSX2:
* add a define to support address sanitizer (both rely on 0x20000000-0x3fffffff memory ranges..)
* sio_buffer out of bond (-1). Maybe we can move the flush in the 2 if previous branch. It would
avoid the extra test.
* wxGetEnv (linux) generates double free (maybe not thread safe). Cache the result so it doesn't crash
anymore when switching renderer
Comment/Review/Improvement are welcome :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5727 96395faa-99c1-11dd-bbfe-3dabce05a288
* GL_ARB_shader_subroutine for perf
fix for nvidia => add missing shader declaration. Nvidia got +4fps on colin3 :)
For the moment only 2 PS parameters are supported. Code need to be extended to support others games that often
switch shader program (like xenosaga).
require GL4 class hardware and the option override_GL_ARB_shader_subroutine = 1
Note: strangely on AMD linux it is slower!
* GL_ARB_shader_image_load_store for accuraccy (Date)
Use a signed integer texture and reenable color buffer writing
Current status: Amagami_transparency.gs & P3_battle_shadows.gs are now working on Nvidia with a small perf impact.
Current implementation detail:
1/ setup the standard stencil as before
2/ on remaining pixel, draw once to compute first primitive that will write a fail alpha value.
3/ final draw based on primitive id of step 2
Note: I think we would get a bad behavior if depth test&mask are enabled on step 2/3
Note2: on my limited testcase the perf impact was on CPU. It would be possible to merge step1&2 to nullifying it (could
even be faster actually), however it would require more GPU power.
Again require GL4 class hardware. And the option UserHacks_DateGL4 = 1
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5725 96395faa-99c1-11dd-bbfe-3dabce05a288
zzogl: fix memory leak (fix#1431, #1432)
GSdx ogl: disable geometry shader on Nvidia/Windows (I will wait a 3rd implementation to find which one is correct)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5724 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo most of the texture upload (PBO): colin3 benchmark: 32 fps now (vs 26 fps 2 weeks ago)
* use the cross vendor vsync extension on linux (previous wasn't supported by nvidia)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5721 96395faa-99c1-11dd-bbfe-3dabce05a288
* some preliminary work to test/benchmark bindless texture in the future (glsl was not yet updated)
Bindless texture allow to get a GPU texture pointer and then set it directly
to the shader as a basic uniform.
=> no more texture unit selection/validation
=> no more texture validation neither texture hash lookup
3rdparty: update gl header to the latest gl4.4
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5720 96395faa-99c1-11dd-bbfe-3dabce05a288
Card that support gs:
remain only a gs to generate sprite from a line. Even dummy gs are costly for the GPU.
Card that don't support gs:
remove useless copy of color for line and triangle primitives
Note for dx: opengl 3.2 (maybe not gles) supports both flat interpolation
convention (GL_FIRST_VERTEX_CONVENTION or GL_LAST_VERTEX_CONVENTION). It might
be possible to shuffle vertex index to put the last vertex in first position.
- buff[0] = head + 0;
- buff[1] = head + 1;
- buff[2] = head + 2;
+ buff[0] = head + 2;
+ buff[1] = head + 1;
+ buff[2] = head + 0;
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5718 96395faa-99c1-11dd-bbfe-3dabce05a288
The idea was to replace shader program swith by pointer function calls inside
shaders. At least parameters that are often changed between draw call. So far
I only ported atst and colclip. Unfortunately code is "slower" (on GSdx standalone).
For the moment keep the code but disabled.
If I understand well the validation of program is done in the "driver thread"
but the additional call are done in the overloaded MTGS thread. Apitrace
profiling shows faster GPU draw calls. Another possibility is that the driver still
need to validate the draw call because of others state change.
Here some stats on colin3 (90 frames):
without subroutine: UseProgram 125246
with subroutine: UseProgram 2906, subroutine 125945 => 3605 extra calls overhead (not
all parameters are ported to subroutine)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5715 96395faa-99c1-11dd-bbfe-3dabce05a288
Note: I think we can do the same on DX11
Perf wise: on colin mcrae 3 it reduces shader prog setup from 3005 to 2086 each frames. It saves 2 ms of CPU processing (27->29fps)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5714 96395faa-99c1-11dd-bbfe-3dabce05a288
* move most of gl states into a separate namespace. Extend it to depth/stencil/blend micro state
=> save 10,000 opengl call by frame for colin mcrae 3
* Only setup blend state of first drawbuffer
* Don't request anymore a debug context on dev/release build
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5713 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean extension management and fix compilation of previous gl44 code.
* Use pixel buffer object to upload texture data.
=> avoid crash on AMD driver
=> a bit faster and probably got some margins for the future
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5712 96395faa-99c1-11dd-bbfe-3dabce05a288
* preliminary work for GL4.4 extensions (ARB_clear_texture & ARB_multi_bind). Disabled until I got a 4.4 driver
Note: I plan also to use ARB_buffer_storage
* compute texture gl option in the constructor (avoid a couple of swith case)
* redo texture unit management. Unit 0-2 for shaders, Unit 3 for texture operations. MultiBind will allow to bind
shader input without disturbing texture binding points.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5711 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a non-working hack: UserHacks_DateGL4, goal was to replace UserHacks_AlphaStencil
+ Detection of good/bad samples is based on primitive ID variable. However I'm not sure
the behavior is always the same between draw call...Anyway let's keep a copy of the current
work
* Dump integer texture into text csv
* add gl4.2 ARB_shader_image_load_store extension (needed by UserHacks_DateGL4)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5707 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to switch renderer with F9
* skip first frame in stat of the replayer
* drop msaa. Fxaa and internal resolution will do the job
* move texture attachment from texture object into device object (allow to keep sanely the state)
* split the write buffer and attachment setup
* completely split sampler and texture input setup
* redo GSDeviceOGL::CopyOffscreen to avoid an extra copy.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5704 96395faa-99c1-11dd-bbfe-3dabce05a288
* use gles header file, disable opengl code (mainly GLX, ARB_sso, geometry shader)
* Define properly the function pointer, GLES use basic linking whereas GL must get the symbol dynamically
* cmake: properly search and set libglesv2.so
* don't use dual source blending => HW renderer work (only miss unimportant FBA)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5701 96395faa-99c1-11dd-bbfe-3dabce05a288
* uniform was wrongly set before the activation of the program (free driver only)
* Always use only 1 drawbuffer. Easier besides previous setup was wrong for convert:ps_main1
GLES trial (v3):
* add the cmake option GLES_API. Note library (libgles) are hardcoded for the moment
* Disable opengl check
* Disable gl_GetDebugMessageLogARB not supported!
* Emulate gl_DrawElementsBaseVertex, add manually the index offset (surely slow but work)
* Fix hundred of shader error (no implicit cast of integer to float...)
Unfortunately GLES doesn't support dual blending so no blend in hardware renderer. Otherwise it is fine
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5700 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace vertex interface with block interface. It avoid to depends on the ARB_sso extension.
* disable geometry shader on Nvidia & Linux. Slower but better than a black screen !
* default logz to 1, avoid some glitches.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5699 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo glsl2h.pl script to generate only one big glsl headers.
* fix gcc warning in GSVector.h
* fix memory leak of GSDeviceOGL.m_shader
* clean shader compilation function => split generation header & drop malloc stuff
cmake:
* only rebuild shader when asked by the use. Avoid perl dependency to build pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5698 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove the possibility to compile shader from file. Some people loads older shaders...
The feature might be readded later
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5697 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to setup advance gl context attribute. If driver doesn't support it fallback to the default.
zzogl:
* use glsl2h to generate an header shader as GSdx. Much easier to install
* Get GSUniformBufferOGL & GSVertexArrayOGL speed improvement from GSdx
cmake:
* detect current gcc version. Yield a warning if < 4.7 or an error if < 4.5
glsl2h:
* support zzogl too
* compute md5sum to avoid useless relink
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5696 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove unused variable
* move static function from h into cpp
* Initialized hw_by_page to 0xFFFFFFFF instead of -1 (number must be a positive integer)
* Use a s32 fore m_current_lsn instead of u32 (use -1 as error code)
Bonus: a couple of fix for clang compiler (doesn't mean that it fully compile with clang)
* remove useless __debugbreak on linux
* use short for 16bits atomic function
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5695 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix shader compilation on Nvidia (broken on r5682)
* fix various memory leak thanks to Valgrind
Cmake: fix a minor typo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5688 96395faa-99c1-11dd-bbfe-3dabce05a288
* use svnrev.h on linux too
* replace sprintf_s with snprintf (hope it still compile on Windows)
* init integer with 0 instead of NULL
* various int -> u32/uint32/uint on for loop index
* remove a couple of unused variable
* init few variable
* disable unused warning results
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5683 96395faa-99c1-11dd-bbfe-3dabce05a288
* Separate state and shader compilation into separate function
* replace various hash_map by basic array
* Compact VertexScale and offset into a single vec4
* add the new option "ogl_vertex_subdata": subdata is faster on FGLRX, test are welcome on Nvidia drivers
0 => use map/unmap
1 => use subdata
replay: add "linux_replay" option and compute some nice stat (mean, standard deviation)
cmake: recreate shader header at build time
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5682 96395faa-99c1-11dd-bbfe-3dabce05a288
* don't delete the wnd in GSclose. It can still be used later
* Properly detect the GL_ARB_gpu_shader5 extension for Fxaa
* A couple of fix in Create (GSopen1) of GSWndEGL/GSWndOGL
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5674 96395faa-99c1-11dd-bbfe-3dabce05a288
* add exception in GSWndEGL and GSWndOGL
* Try to use EGL when GLX failed => you don't need any flags for the opensource driver ;)
cmake: don't install anymore the glsl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5671 96395faa-99c1-11dd-bbfe-3dabce05a288
Asmodean.pcsx2