a0629587be
gsdx memory: implement read texture of PS GPU24
...
convert the swizzled block as tightly packed 24 bits RGB
Then convert scanline to standard 32 bits RGBA
The HW renderer requires the preload data hack
2016-10-05 21:59:42 +02:00
1c900e780a
gsdx memory: add a PS GPU 24 bits format
...
Same swizzle as 16 bits. But contains tightly packed RGB pixels.
2016-10-05 21:06:38 +02:00
1cc696ab31
gsdx hw: update TEST.ATE field after ATE optimization
...
Otherwise DoFirstPass/DoSecondPass will give you result based on pre-ATE optimization
Close #1607
2016-10-05 09:43:24 +02:00
3653a7746a
gsdx psxmode: small hack to "see" video until we found a better solution
2016-10-05 09:43:24 +02:00
677f890c5c
gsdx debug: static GSState::s_n
...
This way you can access the current draw call anywhere. Very useful for debug.
2016-10-05 09:43:24 +02:00
61333ecb40
gsdx debug: trace register access
...
I didn't include high frequency register such as vertex stuff
main goal is to give the possibility to trace the texture/clut update
2016-10-05 09:43:24 +02:00
1b8d6a38e7
Merge pull request #1586 from PCSX2/gsdx-refresh-gui-options
...
Gsdx refresh gui options
2016-10-04 18:30:48 +02:00
7d165da105
pcsx2: update credit box
...
Put turtleli in dev section
Add FlatOut in special thanks section
Thanks you very much for your hard work.
2016-10-03 22:25:59 +02:00
354aa6831b
gsdx ogl: brain hang in the middle of the line
...
Only impact if bilinear is forced
2016-10-03 18:52:02 +02:00
5b72fab2e4
gsdx ogl: depth regression from 866173a481
...
Only mask depth if the min value is too big
Issue #1602
2016-10-03 18:32:54 +02:00
3be055a366
gsdx hw: remove code to detect an effect
...
It was a tentative to emulate GTA radiosity but the new hack is more generic
2016-10-02 18:29:23 +02:00
7dcf1cbf90
Merge pull request #1593 from PCSX2/greg/gsdx-hw-ate
...
gsdx hw ate
2016-10-02 18:22:02 +02:00
49c44db635
gsdx:dx: make filtering right
...
WMS/WMT 2 is the region clamping mode.
Hw unit can't emulate it right so it can give you bad filtering (Fix #1025 )
Note: I only did the fix because I wanted to remove the TEXA hack. Otherwise
it is still recommended to use openGL
2016-10-02 18:21:52 +02:00
7f4791fa85
gsdx hw: improve no_ds detection
...
Support ZTST_NEVER as no depth read => psx mode speed boost
Use zm/fm to reduce further depth lookup
2016-10-02 18:21:52 +02:00
c3ac3ecbe7
gsdx hw: move try alpha test at the beginning
...
Will allow to use alpha test optimization to better optimize depth lookup
Require to do clut handling before
2016-10-02 18:21:52 +02:00
dc365e066d
gsdx tc: remove old plain TEXA hack
...
It must work fine without it now.
From the google code comments:
It would be nice to test those games
* Ar Tonelico 2 (line in sprite regression?)
* breath of fire dragon quarter (overlayed user interface in the game)
v2: update Dx code to use the good format
2016-10-02 18:21:52 +02:00
cf13cccb1e
gsdx: avoid useless spamming of INVALID PSM in release build
2016-10-02 18:21:41 +02:00
471f33ceef
Vif Unpack: initialise UnpkNoOfIterations before use.
2016-10-02 17:18:49 +01:00
744d07b8a1
Vif: Fix MSCNT for MK: Shaolin Monks.
...
-Tested Baldurs Gate, Twisted Metal, Warship Gunner 2 and Downhill Domination, all seem to be fine still.
2016-10-02 15:35:06 +01:00
59be0818e2
Gif: Fix MFIFO logic so it doesn't get caught in a loop (Tekken Tag)
2016-10-02 14:35:36 +01:00
955a69b16e
gsdx ogl: fix GT4 regression (wrong texture on timing)
2016-10-02 12:16:48 +02:00
c7c6566bca
gsdx hw: of course the full Jak series will kill me
2016-10-02 11:57:09 +02:00
b6638d4eec
gsdx hw: forgot to comment an unused variable
...
Keep the code in case, we better solution is found to validate the depth/frame format
2016-10-02 10:18:15 +02:00
fd1cc2fdcb
ci:appveyor: Don't use branch name to name directory
...
Fixes issues with using a / in the branch name, which causes the rename
command to fail because the parent directory isn't present.
2016-10-02 00:04:56 +01:00
3996fbe365
gsdx hw: reduce conplexity around TryAlphaTest
...
* As sw renderer, don't bother to bypass it when it is ATST_ALWAYS
* Don't update the ATE register value
=> It is a really bad idea. Next draw call will be wrong if TEST register isn't written.
The TryAlphaTest context could have been updated
2016-10-01 19:20:49 +02:00
c5f086b385
gsdx ate: separate the code that depends on TEST.AFAIL
...
Easier to read and allow a switch optimization
Add a shortcut for the common ATST_ALWAYS case
2016-10-01 19:20:38 +02:00
4612b79575
gsdx: add a warning on vertex trace
...
Due to a division by 2, depth lsb bit is always 0
I'm not sure it is critical but let's keep a note for the future
2016-10-01 19:16:44 +02:00
d1e07295e7
gsdx linux: add the missing gui option for unscale point/line primitive
2016-10-01 19:16:44 +02:00
5e1064da55
gsdx: remove the safe accurate blending hack
...
V2: Integrate Flatout patch to do the Window side
2016-10-01 19:15:52 +02:00
f77c1900fa
gsdx tc: always clear a new depth buffer
...
Random data isn't a good idea for a depth buffer. It can cause flickering. (Jak2 FMV)
Hopefully it won't impact too much the speed.
2016-10-01 19:00:17 +02:00
9c84712640
gsdx hw: enable palette read back on Jak2
2016-10-01 18:47:21 +02:00
98c22b9acb
psxmode: tried to put the hardware reconfiguration reset in the proper location. didn't work for some reason.
2016-10-01 12:16:56 +02:00
d8e0b9f541
psxmode: few comments and a missing hw write.
2016-10-01 11:41:07 +02:00
e8ab0f6e85
Merge pull request #1591 from turtleli/update-wx
...
3rdparty: Update wxWidgets to latest 3.0.x git branch
2016-10-01 02:34:45 +01:00
5d93a392e4
gsdx hw: xman half screen correction
2016-09-30 22:25:24 +02:00
29c25bc375
gsdx clut: disable some assertions often fired
2016-09-30 22:24:38 +02:00
34686394a6
gsdx hw: add an hack for Jak3
...
I'm disappointed...
Read back palette written by the GPU. Avoid strange color on the skin.
2016-09-30 19:22:16 +02:00
df2f8684d6
gsdx: improve TC cache log
2016-09-30 19:18:58 +02:00
8d24aa2b39
gsdx: GoW2 half screen bug
...
... Seriously ...
2016-09-30 19:15:25 +02:00
fc32b749dd
onepad: fix a pad regression on odin sphere
2016-09-30 10:25:14 +02:00
7ad38057b5
symbolmap: Use C++11 recursive mutex
...
Newer wxWidgets versions call SetThreadUILanguage() on Windows, which
somehow causes our recursive mutex implementation to take ~1ms when
recursive locking occurs. So when a game boots up and the debugger is
loading the symbol map which can easily have 15000+ symbols, the GUI
locks up for 15+ seconds.
Switching to C++11 recursive mutexes seems to work around the issue. It
should be safe here since there's no direct interaction with the GUI.
Note: There is still a 1-2 second GUI lockup when booting a game on
Windows (it has existed for quite a while, and is more noticeable with
fast boot). It doesn't seem to affect Linux (or maybe it's harder to
detect).
2016-09-30 00:55:07 +01:00
a6eb615431
psxmode: kernel TTY (printf)
2016-09-29 19:02:57 +02:00
e511265cc9
gsdumpgui: Make it work even if it's not named GsDumpGUI.exe
...
Fixes #1592 .
[skip ci]
2016-09-28 23:21:26 +01:00
8d4fadb3c8
Revert "gsdx state: TEX0 write behavior might depends on the context"
...
This reverts commit b34243fa7b
2016-09-28 20:00:56 +02:00
90ad9cf668
gsdx hw mipmap: tune the rounding + remove previous hack
...
GS really uses an invalid texture located at 0.
Improve the rounding for R&C. The idea is to avoid the corner case were only
the corner of the triangle touch the 7/16 edge.
2016-09-28 19:41:12 +02:00
adb8be3287
gsdx: add/update comment
...
Need to investigate why the number of vertex is different in upscaled resolution
2016-09-28 19:41:12 +02:00
749037346c
gsdx: report an error if PSM is invalid
2016-09-28 19:41:12 +02:00
fea31f7422
gsdx: don't use virtual when it is useless
2016-09-28 19:41:11 +02:00
97172f5e51
gsdx debug: count draw call in a different way
...
* Always do +1 before the draw call
* Prefix texture name with i (as input) to keep them before the FB
Goal is to ensure that all renderers share the same draw call value.
2016-09-28 19:41:11 +02:00
fd58ee6289
psxmode: disabled a PGIF ringbuffer memset, added comments
2016-09-28 16:18:59 +02:00
Pseudonym