9ccc236b9c
Merge pull request #2179 from RachelBryk/sort
...
Consistently sort games with the same name but different revision or reg...
2015-03-11 12:31:25 +11:00
66bb3000c2
Don't construct NANDContentLoader classes before Main.cpp runs
...
The cUIDsys constructor writes to <Wii user path>/sys/uid.sys.
This must not be done before Main.cpp sets the correct user paths.
2015-03-09 16:08:32 +01:00
d7e54c36f1
Calibrated the GCPad even if the game does not explicitly do so.
2015-03-09 17:07:15 +11:00
d92efc4a3e
Merge pull request #2190 from skidau/wiimote-profiles
...
Fixed the wiimote profiles not taking effect.
2015-03-09 11:30:33 +11:00
a1dbe8e463
Merge pull request #2166 from MoochMcGee/master
...
Add various loads and stores to JitIL
2015-03-08 17:12:52 -07:00
07251b7c57
Merge pull request #2177 from skidau/debugger-split-window
...
Added the ability to split the Debugger window horizontally and vertically
2015-03-09 10:58:16 +11:00
859c1123ba
Fix typo in usage of IsOptimizableMMIOAccess.
2015-03-08 16:20:17 -07:00
b200e83b02
Fixed the wiimote profiles not taking effect.
2015-03-09 08:32:14 +11:00
7f50cc0873
[AArch64] Optimize slowmem paired stores.
...
This came up from the discussion we were having prior about dumping half of a kilobyte of VFP registers to the stack is insanity.
This was due to me basically copying exactly what I did on ARMv7's paired loadstores, where the impact is less since we only use the bottom 64bits of
the VFP registers.
So I decided to think about how to improve upon this since I got called out on my terrible code.
The solution I have come up with is instead of jumping to the common ASM routine and having that check if it needs to take the fastmem or slowmem
routes, just inline the check in to the JIT block and jump to either a fastmem or slowmem handler.
Fairly simple, and this allows us to only flush the registers that are required when doing so. Should give a reasonable increase in performance for
games that use the slowmem path quite a lot.
2015-03-08 16:12:49 -05:00
f6511c3ba5
[AArch64] Add an assert to SMOV in the emitter.
...
SMOV doesn't have an encoding for moving a 32bit element to a 32bit GPR.
One should use UMOV if they want that.
2015-03-08 12:29:45 -05:00
f3f2ed1536
GLX: fix memory leak
2015-03-08 17:42:37 +01:00
b0f61201c3
Merge pull request #2142 from Sonicadvance1/fix_gles31_non_nvidia
...
Fix OpenGL ES 3.1 on non-Nvidia devices.
2015-03-08 09:03:05 -05:00
a9622c247b
Merge pull request #2146 from Sonicadvance1/aarch64_optimize_fpr_push_pop
...
[AArch64] Optimize FPR pushing and popping.
2015-03-08 08:51:45 -05:00
a984b2476a
Merge pull request #2144 from Sonicadvance1/android_autostart
...
[Android] Support arguments from Activity Monitor.
2015-03-08 08:50:27 -05:00
3c5e99c777
Fix OpenGL ES 3.1 on non-Nvidia devices.
...
We are declaring we require ARB_shader_image_load_store in the shader, this isn't an extension on GLES because it is part of the GLSL ES 3.1 spec.
If we are running as GLES then just not put it in the shaders.
2015-03-08 08:49:53 -05:00
70977fd6b1
Merge pull request #2092 from Sonicadvance1/gles_occlusion_queries
...
Implement full occlusion queries for the Nexus 9.
2015-03-08 08:44:15 -05:00
c2b2e03f73
[Android] Support arguments from Activity Monitor.
...
Activity Monitor can start activities by using adb to invoke it.
This will allow us to set the user directory and autostart file from adb.
adb shell am start -n org.dolphinemu.dolphinemu/.gamelist.GameListActivity -e AutoStartFile /sdcard/AC.gcz -e UserDir /sdcard/dolphin-emu2/
This allows more automated testing to be done with Dolphin on Android.
2015-03-08 08:43:25 -05:00
3e12787cc8
Fixed a crash on launch which occurred if the hotkeys are not defined and the default hotkeys are loaded.
2015-03-08 20:27:14 +11:00
8f0bc1cd3a
Slowed down the freelook speed keys and allowed the depth/convergence keys to be held down.
2015-03-08 20:27:13 +11:00
9c133c0509
Readded the Key Shortcut function.
2015-03-08 20:27:13 +11:00
12ecc537e9
Renamed the Menu Accelerators to Key Shortcuts.
...
Cleared the default mapping of hotkeys as they were conflicting with the key shortcuts.
Removed the Open, Change Disc, Refresh List and Exit hotkeys as they work only when driven from the menu.
2015-03-08 20:27:13 +11:00
780eef68f6
Fixed the crash that would occur when the Refresh button was pressed in the controllers config.
...
- Simplified the locking mechanism when controllers were updated
- Reloaded the config of the controls instead of re-initialising the control plugins
- Fixed controls being unresponsive after the Refresh button was pressed
- Disables the hotkeys while the controller config is open
2015-03-08 20:27:13 +11:00
b446ea0132
Made the freelook keys work while held down
2015-03-08 20:27:13 +11:00
099876782f
Made the "Frame Advance" hotkey work while the key is held
2015-03-08 20:27:13 +11:00
a83d27b9c2
Increased the performance of the hotkey code by:
...
* Halving the number of hotkeys checked for (there were extra for future use)
* Gets the controller status once before parsing hotkeys
* Checks for the GUI lock once before parsing hotkeys
* Removed some redundant memsets
2015-03-08 20:27:12 +11:00
d2abbcd353
Removed the requirement to have the Freelook option enabled for the freelook hotkeys to work.
2015-03-08 20:27:12 +11:00
d080632527
Ignore the File Open command if a game is running
2015-03-08 20:27:12 +11:00
679d9351ea
Fixed the Connect Wiimote hotkeys from getting activated while a GameCube game is running.
2015-03-08 20:27:12 +11:00
cc6b55ee2a
Fixed the save state hotkeys so that they work with the Render to Main Window option.
2015-03-08 20:27:12 +11:00
3987725217
VertexLoaderX64: fix harmless off-by-one error
2015-03-08 04:43:59 +01:00
9c045e2496
Merge pull request #2094 from lioncash/flags
...
Interpreter: Flag cleanups/fixes.
2015-03-07 17:38:00 -08:00
11b437ffd1
Consistently sort games with the same name but different revision or region.
2015-03-07 05:17:46 -05:00
3df51e553f
Fix crash when server's client disconnects.
2015-03-07 04:40:24 -05:00
12155ddee4
Added the ability to split the Debugger window horizontally and vertically via the Add Panes menu.
2015-03-07 12:33:33 +11:00
4a41ab1715
Fix 4.0-5689 regression (AR codes, patches)
...
CreateCodeTab, ARCodeAddEdit and PatchAddEdit
need to be able to modify arCodes/onFrame.
2015-03-06 12:26:40 +01:00
a3f6cbfe6b
Merge pull request #2167 from JosJuice/language-selection-regression
...
Call SetUserDirectory before InitLanguageSupport
2015-03-06 15:25:51 +11:00
47c8955248
Merge pull request #2168 from JosJuice/language-selection-untranslated
...
Display languages untranslated in GUI language selection
2015-03-05 18:05:23 -05:00
92ba677371
Merge pull request #2174 from skidau/warning-fix-gc-adapter
...
Warning fix
2015-03-05 14:56:19 -08:00
ef3fd68603
Warning fix
2015-03-06 09:34:38 +11:00
45dbcf0ed2
Jit64: use MRegSum where appropriate
2015-03-05 21:58:28 +01:00
e27fae22d8
Jit64: drop a FIXME that has been fixed for years
...
See 6cdb40a194
2015-03-05 21:58:28 +01:00
b7514955e5
Merge pull request #2113 from Stevoisiak/VolumeCleanup
...
Basic volume code cleanup
2015-03-05 12:18:53 -05:00
203c64e66d
Changed the GC Adapter rumble command to work like other controllers.
2015-03-05 23:57:18 +11:00
4cf4cee30e
Removed the GC Adapter "Use Thread" option as it was not useful.
2015-03-05 23:30:43 +11:00
e5277a5f49
Ignore invalid rumble data sent over Netplay to the GC Adapter
2015-03-05 23:11:48 +11:00
dee6a04980
Moved the gcpad calibration from construction to runtime
2015-03-05 23:06:19 +11:00
863a4c9ce0
Fix clamping for rectangles.
...
Clamping a rectangle correctly requires fully clamping all four
coordinates in the general case.
This should fix issue 6923, sort of; at least, it fixes the part where a
rectangle ends up with a nonsensical height after being clamped.
2015-03-04 17:15:29 -08:00
c40e1d972a
Sort language list alphabetically by new names
2015-03-04 20:36:04 +01:00
a8a9dafb1f
Display languages untranslated in GUI language selection
2015-03-04 20:35:19 +01:00
2cb4a3efbc
Call SetUserDirectory before InitLanguageSupport
...
Fixes a regression from 4.0-5692 where only the system language was used.
2015-03-04 14:45:36 +01:00
a11bbe6fea
PPCTables: Remove FL_OUT_S.
...
This is unused, and since it had the same value as FL_OUT_D, it was unnecessarily setting the rS register as an output, even on instructions that only have FL_OUT_D set.
2015-03-03 16:23:28 -05:00
139dbcb8e2
Interpreter_Tables: Fix wrong flags and add missing ones
2015-03-03 16:23:21 -05:00
f4750804ab
Add various loads and stores to JitIL
2015-03-03 11:17:25 -06:00
96c4b332f6
FileMonitor: Check log level in addition to FileMonitor checkbox
...
This is good for performance when FileMontior is selected
but the log level only is set to notice or warning.
The ability to do this wasn't available until recently:
1ed41672f5
2015-03-03 11:33:16 +01:00
fbdee7b15f
[AArch64] Handle FPR island registers in a less dumb way.
2015-03-03 00:30:05 -06:00
81242dd4a7
[AArch64] Allow the other FPR push/pop routines to use a temporary register.
2015-03-02 21:38:09 -06:00
a5ea6c6e93
enet: fix Visual Studio files
2015-03-02 22:20:37 +01:00
691b690afe
enet: Search for shared library
2015-03-02 22:18:57 +01:00
f1a9db9bdc
[AArch64] Stop violating the AAPCS64 so much.
2015-03-02 11:21:15 -06:00
cc5a2f3411
Merge pull request #2164 from Armada651/cache-fix
...
ProgramShaderCache: Do plenty of error checking before writing shaders to the disk.
2015-03-02 17:24:00 +01:00
728081dad2
ProgramShaderCache: Do plenty of error checking before writing shaders to the disk.
2015-03-02 17:03:49 +01:00
fad46729b0
[AArch64] Implemented paired pushing/popping for the VFP.
...
A bit more efficient if we are only pushing two VFP registers.
We can probably be a bit more efficient in the future by mixing paired loadstores in to the other paths as well.
2015-03-02 06:27:47 -06:00
39e357d62d
[AArch64] Implement VFP loadstore paired in the emitter.
2015-03-02 06:27:17 -06:00
8b8310d28c
[AArch64] Optimize FPR pushing and popping.
...
Previously on FPR pushing and popping we would do a single STR/LDR per quad FPR we wanted to push/pop.
In most of our cases when we are pushing and popping VFP registers they will be consecutive registers that will save more efficiently using the NEON
loadstores that can do up to four quad registers.
So this can potentially cutting instructions down to ~1/4th the amount of instructions if the registers are all consecutive.
On the Cortex-A57 this is basically just an icache improvement, but on the Nvidia Denver this may be optimized to be more efficient. Either way it's a
win.
2015-03-02 06:27:13 -06:00
cd8c37bc07
Merge pull request #2145 from skidau/GC-Adapter-status-fix
...
Cleared the status of the GC Adapter before populating it with new data
2015-03-02 12:18:52 +11:00
939159cd71
Cleared the status of the GC Adapter before populating it with new data
2015-03-02 11:08:26 +11:00
35373c5185
TextureCache: load all mipmap levels from custom textures
...
This drops the "feature" to load level 0 from the custom texture
and all other levels from the native one if the size matches.
But in my opinion, when a custom texture only provide one level,
no more should be used at all.
2015-03-02 00:09:09 +01:00
7f7973efa5
Merge pull request #2148 from Tilka/fifo_cleanup
...
Small FIFO-related cleanup
2015-03-01 13:06:43 -08:00
b4a586f84a
Merge pull request #2161 from Tilka/fix_warnings
...
Fix some warnings
2015-03-01 13:02:37 -08:00
aa24dbc56e
Merge pull request #2157 from lioncash/leaks
...
DolphinWX: Allow input subsystems to correctly deinitialize
2015-03-01 12:53:28 -08:00
f75187db3e
Add missing newlines at EOF
2015-03-01 17:17:09 +01:00
88264f5712
Fix -Wswitch warning
2015-03-01 16:17:32 +01:00
4304648a05
Fix -Wreorder warning
2015-03-01 14:54:22 +01:00
7ca24f90d1
TexCache: increase TEXTURE_KILL_THRESHOLD
...
Xenoblade uses more than 40 textures alternately per frame for eg water effects.
So don't try to drop them as aggressive.
2015-03-01 13:41:14 +01:00
3981212031
DolphinWX: Allow input subsystems to correctly deinitialize
...
Previously InitControllers() would be called every poll duration, setting this boolean to false which would prevent said sybsystems from deinitializing correctly.
2015-03-01 01:23:21 -05:00
d3c9701eb6
Merge pull request #2156 from Stevoisiak/EFB-Copies-To-Texture
...
VideoConfigDiag: Rename EFB Copies to RAM option
2015-02-28 22:28:11 -06:00
cb7b96009d
VideoConfigDiag: Rename EFB Copies to RAM option
2015-02-28 23:00:49 -05:00
492aa5c391
DiscIO: Get rid of unsafe cast
2015-02-28 22:03:53 -05:00
5346e791bc
VolumeWad: change titlever to title_version
2015-02-28 21:42:16 -05:00
4cc19ac926
DolphinWX: Clean up some wxTimer code
...
Technically fixes a memory leak (which wouldn't matter because the timer is only created once and destroyed on shutdown).
Also starting and stopping the timer does not cause leaks.
2015-02-28 20:32:37 -05:00
eff924e9e2
General Formatting
2015-02-28 19:33:27 -05:00
baf732b48b
DolphinWX: fix searching the game list in GTK
2015-02-28 16:43:31 +01:00
9493c713dd
Fifo: small cleanup
2015-02-28 15:40:01 +01:00
e28c97f6bd
Fifo: drop unused functions
2015-02-28 15:40:00 +01:00
d10571a86a
PixelShaderManager: Remove unnecessary casts.
...
EFBToScaledXf and EFBScaledYf return a float, so the cast isn't needed here.
2015-02-28 00:04:05 -05:00
4dd0813dcf
Merge pull request #2133 from randomstuff/hotkeys
...
Fix hotkeys for Linux
2015-02-28 10:59:18 +11:00
4f9fcbaba9
Merge pull request #2120 from JosJuice/show-default-gameini
...
ISOProperties: Allow opening region-free INIs with "Show Defaults" button
2015-02-27 17:58:42 +01:00
1dcd0ad879
Merge pull request #2129 from Sonicadvance1/shuffle_user_dir
...
Move user directory detection location to UICommon.
2015-02-27 14:07:06 +11:00
2a41ac4072
Merge pull request #2123 from RachelBryk/nonmodal-isoprops
...
Make iso properties non modal.
2015-02-27 13:25:46 +11:00
85359d5169
Merge pull request #2124 from RachelBryk/framelimit-hotkeys
...
Fix order of some hotkeys
2015-02-27 13:24:32 +11:00
ede4977d12
VolumeWiiCrypted: Implement IsDiscTwo()
...
Allows us to check if a Wii game is marked as Disc 2.
2015-02-26 17:10:18 -05:00
f72a559958
Rearranged Volume header files
2015-02-26 16:57:32 -05:00
06cb85991e
De-capitalized CountryCode
2015-02-26 16:57:31 -05:00
df2f6d137e
VolumeWad: Move country identification to GetCountry()
...
Brings the code more in line with the rest of the game volume code
2015-02-26 16:55:17 -05:00
d3190ec4f1
VolumeWad: Private variables for offset values
2015-02-26 16:55:16 -05:00
d50c56c2e4
DolphinWX: Remove an unnecessary sizer from the watch window
...
The AUI manager already has the grid in place. Setting the sizer isn't needed.
2015-02-26 09:58:38 -05:00
779f275486
Added TraversalServer.cpp to Core/Common
2015-02-25 18:28:27 -08:00
619a3a5171
Added all of enet lib, changed Cmake files accordingly
2015-02-25 18:28:27 -08:00
a629555e6b
Added Gui elements in Netplay Setup Diag so a person can choose a traversal server
...
Fixed bug with UPnP so that it will grab the proper address and protocal
Fixed bug that caused dolphin to freeze when host codes were to large
2015-02-25 18:28:26 -08:00
1dea3780a7
Fixed issue where players were not disconnecting correctly
2015-02-25 18:28:26 -08:00
skidau