hopefully this will be the last code change committed directly to master for a while... :/
next is cmake to replace scons on osx hopefully. pointers anyone? (soren?)
Uses a single page for configuring ALL wiimotes now.
Due to the use of wxWindow::NewControlId, this might increase our wx version requirements (irrelevant for windows users). Works fine with wx 2.8.10 at least, but the docs aren't more specific about when wxWindow::NewControlId was introduced. If anyone doesn't like this, I'll change it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7692 8ced0084-cf51-0410-be5f-012b33b47a6e
Also, don't check to see if a directory is a wad file. They aren't. This removes an annoying and invalid debug assertion with the debug build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7682 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
Also if the OpenGL backend throw a panic alert if the RGB to/from YUYV shaders fail to compile instead of an error log. If these shaders fail to compile it should be reported. I am not sure that a panic alert should be thrown in general when any shader fails to compile (as was discussed on IRC).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7677 8ced0084-cf51-0410-be5f-012b33b47a6e
See comment #6 for more details on the changes to WII_IPC_HLE_Device_usb.
In addition to that, rework some comments a bit (such as those from the
original patch; plus Ayuanx's one about maintaining Wiimote timing, which lost
relevance since r7272 which made Wiimote::Update timing independent from IPC
timing), and remove an unused global variable (event for watchdog hack)...
In short, this should address *some* of the Wiimote disconnection and/or "forgotten extension" problems that appeared with r7272 and/or r7394. To prevent the "ACL queue is full" warnings from appearing (View->Show Log), pay attention to the amount of enabled Wiimotes (use as few as possible, connect the extra Wiimotes only when needed), and make sure to disable the "Disable Wiimote Speaker" option (if unneeded or causing problems) in the game properties. If possible, make sure to use real Wiimotes instead of emulated ones, as well.
If Wiimotes disconnect forever (and cannot be reconnected using the Alt+Fx hotkeys), open the Wiimote config window, set the faulty Wiimote's type to "None", close/reopen the window, and set the previous Wiimote type back.
Note that it's not a *complete* fix for issue 4608! This only fixes about half (or maybe third) of the possible causes of this issue... But at least this should make the accurate Wiimote emulation (I mean, with the limitation of the ACL queue included) more usable in some cases (such as multi-player).
Nope, I didn't (and can't yet) perform in-depth tests on the real hardware myself (unlike some developers), I just rely on the given "accurate" code and numbers (such as the 10-packet limit implemented by godisgovernment)...
Maybe I'll get to fixing other problem "causes" (if I feel like doing it), maybe not in a while... After all, I have other hobbies, and it's the summer holidays for me...
Anyway, feel free to test and comment.
Update issue 4667
Update issue 4608
Update issue 4604
Update issue 4583
Update issue 4436
Update issue 4353
Update issue 4013
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7675 8ced0084-cf51-0410-be5f-012b33b47a6e
This is mostly useful for removing SHLs by constant 1, 2, 3, which this
commit implements in one place.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7652 8ced0084-cf51-0410-be5f-012b33b47a6e
requires NG-id, NG-key-id, NG-priv, NG-sig
sorry for not fixing this sooner, I forgot that I cleared my wiis private keys before the initial commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7642 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed OnFrame.cpp/h to a more accurate Movie.cpp/h. Made some small changes that may improve movie synchronization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7620 8ced0084-cf51-0410-be5f-012b33b47a6e
Also don't try to save and load states when the emulator is not running. This should fix most of issu 4600.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7607 8ced0084-cf51-0410-be5f-012b33b47a6e
Judging by the feedback provided by other OSX users, this appears to fix the crash when starting Dolphin on OSX with devices that have an empty name.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7598 8ced0084-cf51-0410-be5f-012b33b47a6e
It turns out that this (somewhat) gets rid of memory-related exceptions which used to occur (especially) during 8-bit cheat searches. At least this is the case with my computer that has 3GB of RAM (the issue didn't seem to be caused by 100% of RAM usage, however).
Hopefully you'll be able to perform the following steps without errors now:
1. Open any game in Dolphin;
2. Go to Tools->Cheats Manager, and open the "Cheat Search" tab;
3. Preferably set the "Data Size" to 8-bit (the smaller, the more initial search results);
4. Press the "New Scan" button;
5. Use the "Unknown" search filter (which won't narrow the results down at all);
6. Press the "Next Scan" button.
(oh, and fix a typo in a comment I introduced in r6791 :p)
Anyway, make sure to tell me any eventual errors/regressions.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7596 8ced0084-cf51-0410-be5f-012b33b47a6e
Removes the ugliness that was the portable file, and now creating a shortcut or file association is less of a pain
it is still necessary to modify the file association from ".../dolphin.exe" "%1" to ".../dolphin.exe" /e "%1"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7593 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes button spacing more consistent and uses the native button order of the OK/Cancel/... buttons.
(Mostly) fixes issue 4390.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7581 8ced0084-cf51-0410-be5f-012b33b47a6e
Left unselected, dolphin defaults to nstc-u and sets ntsc-j if the iso is japanese (old behavior).
Selected, ntsc-j is forced.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7580 8ced0084-cf51-0410-be5f-012b33b47a6e
sliders being unresponsive during emulation. Fixes issue 4496.
wxw complaining about non-stock menuitem without text (sysmenu menuitem).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7579 8ced0084-cf51-0410-be5f-012b33b47a6e
- Moved display related options in the "Display" tab from the general config to the gfx config, renamed the tab to "Interface"
- Moved Wiimote related options in the "Wii" tab from the general config to the wiimote config
- Moved various other options to more appropriate places ("Set Console as NTSC-J", "Skip GC BIOS"
- Dropped "Window Size" adjustment
- Now displaying a warning if one tries to enable software rendering
- Other minor changes
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7577 8ced0084-cf51-0410-be5f-012b33b47a6e
changes fs getusage to return 1 additional inode to account for the directory itself
Fixes save creation for at least two games, R8XE52 (Jurassic: The Hunted), STEETR (Tetris Party Deluxe)
doesnt harm save creation in any games that i tested (about 25)
also it is now possible to boot a nand title by selecting the tmd file using File > Open
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7575 8ced0084-cf51-0410-be5f-012b33b47a6e
if you have a sysconf from r7568-this revision that was used for a wii game unfortunately it is corrupted, either delete it and start with a new one, or clear out the number of wiimotes in btdinf (change to 0) using a hex editor
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7571 8ced0084-cf51-0410-be5f-012b33b47a6e
I believe this makes Dolphin more reliable than GCNcrypt v1.1 which seems to add (prepend) a buggy line when decrypting...
- Split lines using SplitString() once more (as done with ' ' and '-' already), instead of relying on find() and substr() and the (size_t)line variable.
- Rename some variables, use a for() loop instead of a while() loop.
- Apply the StripSpaces() function to each line before attempting to parse them as encrypted/decrypted AR code lines. Without this, lines such as "B1PD-DXRQ-GTRKM " (notice the unexpected space character) would be recognized neither as encrypted nor as decrypted, which could result in badly decrypted codes (a problem I had tried to explain here: http://forums.dolphin-emulator.com/showthread.php?pid=153532#pid153532).
- For the sake of error-checking, after pressing OK, throw a warning in the following situations: when a line of code is not in a valid encrypted or decrypted format, and whenever the resulting decrypted code doesn't contain any lines.
(did I do any mistakes?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7569 8ced0084-cf51-0410-be5f-012b33b47a6e
some little corrections in dlist cache code, i thing they will not have effect in the remaining issues but now the code behaves more correctly in some situations.
i discover the solution for the remaining issues bur requires some changes in the vertex translator so will work on them after the upcoming Release.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7556 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
GH5 Loads again
use the existing function instead of checking titleid each time a NANDLoader is needed
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7547 8ced0084-cf51-0410-be5f-012b33b47a6e
So, clarify this by rewriting the "tooltip" for the Free Look option. This should close issue 2882 and its duplicates.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7546 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
now if you install the sysmenu from a wad in the gamelist the menubar will be updated with the new sysmenu version
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7528 8ced0084-cf51-0410-be5f-012b33b47a6e
we already copy the file to memory here, now we also copy the file to
1/2/data/
This should really fix issue 4287.
Thanks to hosigumayuugi for finding the exact cause of the issue
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7521 8ced0084-cf51-0410-be5f-012b33b47a6e
XGRA Extreme-G Racing Association/Conduit 2... Enabled 48kHz output for LLE (before it was just 32kHz). I hope it works, if there are serious problems, it will be reverted.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7511 8ced0084-cf51-0410-be5f-012b33b47a6e
Saving a state that is not recording over one that was will now delete the old recording. Fixes trying to record with the wrong savestate.
Fixed some compiler warnings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7505 8ced0084-cf51-0410-be5f-012b33b47a6e
(At least for Super Mario Sunshine, from whose ucode it was derived - hopefully this won't break other games.)
Fixes Issue 4437.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7504 8ced0084-cf51-0410-be5f-012b33b47a6e
fs::open does not need to create the data directory, es_diVerify does that.
change applied to CBoot::Boot_WiiWAD as well (es_diVerify isn't used for wads).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7503 8ced0084-cf51-0410-be5f-012b33b47a6e
- Fast Mipmaps enabled
- Safe Texture Cache enabled at "fast"
- showing shader errors by default
- using Native as internal resolution
- using EFB to Texture by default
- ignoring EFB format changes by default (turns out r7436 made this in Super Mario Sunshine unnecessary anyway :P)
Any game which depends on other settings has that specified in the game ini, so I think this should be fine.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7497 8ced0084-cf51-0410-be5f-012b33b47a6e