shuffle2
81414b4fa2
Merge pull request #3076 from void-ghost/stereo3d_presets
...
Stereo3d presets
2015-10-03 18:10:23 -07:00
Lioncash
a10be26972
Tev: Don't savestate Zero16
...
It's an array of zeroes. There's no need.
2015-09-30 19:45:50 -04:00
Lioncash
c6678687b0
ChunkFile: Provide additional helpers for C-style arrays
...
Gets rid of magic numbers in cases where the array size is known at compile time.
This is also useful for future entries that are stack allocated arrays as these
functions prevent incorrect sizes being provided.
2015-09-30 19:45:46 -04:00
Lioncash
1d42db2439
Common: Move NonCopyable to its own header
2015-09-26 18:50:35 -04:00
ghost
07e4b4f7c4
VideoBackend: Video config filename is now exposed in VideoBackends.
...
It reduces redundancy. Needed make possible to save current video config.
2015-09-22 09:47:19 +03:00
Scott Mansell
95f3c956a8
Move GL interface code out of the OpenGL video backend.
2015-09-22 00:36:45 +12:00
degasus
be16901ae1
VideoSW: Don't raise a PanicAlert because of indices
...
It's not panic, it may just render wrong. And this case seems to happen often.
2015-09-20 13:13:47 +02:00
degasus
c976e14277
GLInterface: Fix VideoSW on linux + OSX (v2)
...
Our Video Software backend isn't OpenGL Core compatible, so we need a flag to alloc a compatible one.
v2: Fix AGL profile selection.
2015-09-19 13:22:55 +02:00
Markus Wick
a7e9a154a5
Revert "GLInterface: Fix VideoSW on linux + OSX"
2015-09-18 13:40:09 +02:00
degasus
baf09c3af6
VideoSW: Remove unused function
2015-09-17 19:44:44 +02:00
flacs
e4dfb2f6bf
Merge pull request #3054 from degasus/master
...
GLInterface: Fix VideoSW on linux + OSX
2015-09-17 19:21:16 +02:00
degasus
3b5b80bf3c
VideoSW: Drop SW bbox code
...
The hardware backends don't use this shared code any more, and it's not needed for video sw either. So this was just dead code.
2015-09-17 18:21:37 +02:00
degasus
e3e0399af2
VideoSW: Drop HwRasterizer
...
I don't remember it being working, and nobody cares about performance of videosw.
2015-09-17 18:21:37 +02:00
degasus
48279c1840
GLInterface: Fix VideoSW on linux + OSX
...
Our Video Software backend isn't OpenGL Core compatible, so we need a flag to alloc a compatible one.
2015-09-17 17:52:56 +02:00
Lioncash
a94300dd86
Rasterizer: Use multiplication instead of shifts in DrawTriangleFrontFace
...
The left-hand-side is negative at some point which is considered undefined by the standard.
2015-09-17 01:46:29 -04:00
Lioncash
b9e360df7b
MathUtil: Convert Clamp into a constexpr function
2015-09-12 01:18:28 -04:00
Lioncash
633be0387d
General: Remove unimplemented function prototypes
2015-09-05 22:01:07 -04:00
Shawn Hoffman
aa7208e270
[windows] Update projects to vs2015.
2015-09-03 04:23:01 -07:00
Markus Wick
6004ecc521
Merge pull request #2920 from rohit-n/build-pch
...
Fix building with PCH disabled.
2015-08-28 23:08:24 +02:00
Rohit Nirmal
6252d2d71a
Fix building with PCH disabled.
2015-08-28 14:13:28 -05:00
Lioncash
e787501528
Vec3: Simplify operator== code
2015-08-28 14:46:40 -04:00
Lioncash
bb27f80a65
Vec3: Remove a memset call on the this pointer
2015-08-28 14:10:07 -04:00
Tillmann Karras
c9af7def28
Fix some warnings
2015-06-23 21:11:56 +02:00
degasus
c375111076
Options: merge SCoreStartupParameter into SConfig
2015-06-12 19:07:45 +02:00
Jules Blok
d5788f75a3
Merge pull request #2533 from degasus/syncgpu
...
Fifo: Rewrite SyncGPU
2015-06-09 09:43:26 +02:00
NanoByte011
59f273696a
VideoSW: refactor shared lighting attenuation function
...
- Refactored Light Attenuation into inline function in Software Renderer
- Corrected zero length light direction vector to resolve with normal direction (essentially becomes LIGHTDIF_NONE which was what I was after)
- Change the API of this shared function to use points for output variables (degasus)
2015-06-08 23:20:27 +02:00
NanoByte011
06d1b8c63a
VideoSW: rewrite lighting attenuation
...
- Fixes remaining lighting issues (Mario Tennis, etc)
- Apply same fixes to Software Renderer
- Corrected zero length light direction vector to resolve with normal direction (essentially becomes LIGHTDIF_NONE which was what I was after)
2015-06-08 23:20:27 +02:00
degasus
d31bed8b79
Fifo: Rewrite SyncGpu
...
The new implementation has 3 options:
SyncGpuMaxDistance
SyncGpuMinDistance
SyncGpuOverclock
The MaxDistance controlls how many CPU cycles the CPU is allowed to be in front
of the GPU. Too low values will slow down extremly, too high values are as
unsynchronized and half of the games will crash.
The -MinDistance (negative) set how many cycles the GPU is allowed to be in
front of the CPU. As we are used to emulate an infinitiv fast GPU, this may be
set to any high (negative) number.
The last parameter is to hack a faster (>1.0) or slower(<1.0) GPU. As we don't
emulate GPU timing very well (eg skip the timings of the pixel stage completely),
an overclock factor of ~0.5 is often much more accurate than 1.0
2015-06-08 23:16:24 +02:00
Scott Mansell
7df6982973
Add a dirty flag for arraybases.
...
Only loop through and call getPointers when something has actually
changed.
Worth about 2-4% speedup un SMG over the previous commit.
2015-05-30 04:39:48 +12:00
Scott Mansell
f57517f1a0
Clean up cached_arraybases. Update VideoSW to new scheme.
...
Move ownership of cached_arraybases from CPMemory to VertexLoaderManager
to better match it usage.
2015-05-30 04:09:27 +12:00
Rohit Nirmal
c59bfd2b7f
Fix building with PCH disabled.
2015-05-26 22:44:51 -05:00
Ryan Houdek
69963dc4b0
Merge pull request #2274 from degasus/disable_bbox
...
Disable bbox
2015-05-25 08:46:12 -04:00
Tillmann Karras
30ebb2459e
Set copyright year to when a file was created
2015-05-25 13:22:31 +02:00
Tillmann Karras
cefcb0ace9
Update license headers to GPLv2+
2015-05-25 13:22:31 +02:00
Tillmann Karras
268f52e054
Add missing license headers
2015-05-25 13:11:47 +02:00
degasus
6b2a1e57e2
BBox: remove now unreachable SW bbox implementation
2015-05-25 09:33:34 +02:00
Markus Wick
ad9dae30a8
Merge pull request #2410 from lioncash/swatomic
...
Software: Convert most volatile variables to atomics
2015-05-22 14:11:16 +02:00
Jules Blok
ef78941042
VideoBackends: Clamp depth to uint24 range.
2015-05-18 23:22:28 +02:00
Lioncash
26a3eaf959
Software: Convert most volatile variables to atomics
2015-05-14 12:33:19 -04:00
degasus
b020ae1c5d
Fifo: rewrite sync on idle skipping hack
...
Now it's done without a busy loop
2015-04-06 12:35:35 +02:00
Tillmann Karras
5a51bc10e5
SWVertexLoader: fix truncated components
2015-03-18 12:09:06 +01:00
Stevoisiak
93b16a4a2d
Formatting/Whitespace Cleanup
...
Various fixes to formatting and whitespace
2015-02-25 10:48:21 -05:00
Ryan Houdek
15e41c67f8
Change RunVertices' function arguments.
...
This reduces some dumb state shuffling when calling the emitted vertex loaders.
2015-02-13 12:16:06 -06:00
degasus
081137bd4f
VideoBackends: set GLInterface to zero after deleting it
...
This fixes a crash on opening the gfx settings after closing a game.
2015-02-01 13:51:34 +01:00
Lioncash
9476756d43
OGL: Fix a memory leak that would occur every time a game is launched
2015-01-31 16:00:53 -05:00
Ryan Houdek
80e6367e46
Merge pull request #1869 from Stevoisiak/GeneralConsistency
...
Minor consistency changes
2015-01-21 13:46:53 -06:00
degasus
3630de99ed
VideoSW: Fix vertex skipping
2015-01-18 04:52:56 +01:00
Stevoisiak
cb86db7b68
Minor consistency changes
...
Mostly small changes, like capitalization and spelling
2015-01-12 15:18:18 -05:00
Rohit Nirmal
bad5aef5df
Fix building with PCH disabled.
2015-01-04 10:45:35 -06:00
degasus
809117102e
VideoCommon: split VertexLoaderBase from VertexLoader
2014-12-21 14:12:43 +01:00