Move CheatManager's child widgets into scroll areas to allow making the
window smaller than the default.
In CheatSearchWidget, enable word wrapping for the label describing the
address space and search type to help it fit better inside a narrower
window.
With this, I intend to make it clearer that Auto, Force 4:3, Force 16:9
and Custom are really the same thing, just with the aspect ratio of the
simulated TV being selected in a different way. I also extended the
introduction in a way I feel will clarify things but which you are
welcome to bikeshed :)
I was thinking of this during the review of 41b19e262f, but wanted to
put it in a separate PR as to avoid blocking it on bikeshedding.
I'm a bit unsure what to do about the word "analog" in "analog TV". I
felt that repeating it for each of these options would be too
repetitive. I suppose there's a reason why we used the word originally,
but digital TVs do give you basically the same aspect ratio for GC/Wii
games as analog TVs. (Of course, whether it's 4:3-like or 16:9-like
depends on what aspect ratio you set in the TV's settings, but that's
the case for widescreen CRTs too.)
* Fix irregularly shaped corners
* Remove extra space for BalloonTips with no message or no title
* When the target tip location is not on a screen, put the tooltip on
the mouse's screen instead of the primary screen
* Fix description getting cut off when the title was too long
* Expose border width as a parameter
* Fix spacing and sizing issues with larger border widths
After reading the previous commit, you might think "hold on, what's the
difference between GetProfileName and GetProfileDirectoryName"? These
two are being used for the exact same thing - figuring out where
profiles are stored - yet they return different values for certain
controllers like GC keyboards! As far as I can tell, the existing code
has been broken for GC keyboards since they were introduced a decade
ago. The GUI (and more recently, also InputCycler) would write and read
profiles in one location, and our code for loading profiles specified in
a game INI file would read profiles in another location.
This commit gets rid of the set of values used by the game INI code in
favor of the other set. This does breaking existing setups where a
GCKey profile has been configured in a game INI, but I think the number
of working such setups is vanishingly small. The alternative would make
existing GCKey profiles go missing from the profile dropdown in the GUI,
which I think would be more disruptive. The alternative would also force
new GCKey profiles into the same directory as GCPad profiles.
This commit also fixes a regression from d6c0f8e749. The Android GUI was
using GetProfileName to figure out what key to use in the game INI,
which made it use incorrect game INI entries for GameCube controller
profiles but not Wii Remote profiles. Now the Android GUI uses
GetProfileKey for this, fixing the problem.
This fixes an issue where the game specific graphics backend would be saved as the global setting after playing a game.
This also now displays the currently running graphics backend when looking in the graphics configuration window.
The player getting a better view of their surroundings than the game would normally allow could possibly give the player an advantage over the original hardware, so Freelook is disabled in hardcore mode. To do this, I disable the config flag for Freelook when it is accessed, to make sure that it is disabled whether it was enabled before or after hardcore mode was enabled.
Memory patches would be an easy way to manipulate the memory needed to calculate achievement logic, so they must be disabled. Riivolution patches that do not affect memory are allowed, as they will be hashed with the game file.
This widget will be used in several places to notify the player that a feature has been disabled because hardcore mode is on. It includes a button to open the Achievement Settings so that Hardcore Mode may be turned off. Also included is the framework required to open AchievementsWindow specifically on the Settings tab.
This makes it so that if you just want to reload the current style (eg. on program start, or in response to a system event), you don't need to know the name of the currently selected user style. It's also more consistent with the way the 'userstyle/enabled' flag works.
GCAdapter::UseAdapter() reads s_is_adapter_wanted, which gets
initialized by config_guard.~ConfigChangeCallbackGuard(). So we must
wait until after destroying the config guard to know whether we have any
controllers set to GC Adapter.
1 ) When first opened, the (user selected) post process shader config widget would print the wrong values on the text label next to int range sliders. For example if the range was from 1 to 6, and the value loaded from the config was 1, the label would print 0 when first opened, to then start showing the correct value once the slider was first moved.
This mirrors the behaviour of the float slider code below:
```auto* const value_box = new QLineEdit(QString::asprintf("%f", m_config_option->m_float_values[i]));```
2 ) The defautl int slider value would also be set wrong on first load, as it was being divided by the slider max instead of the slider step amount (again, just like for the float implementation). This is a mistake I had made with my previous submission.
Mesa (llvmpipe) only reports 4x MSAA, and doesn't report 2x (or 1x, but we implicitly add that). The old logic did not handle this correctly, causing selecting 4x to fail and fall back to None.
This also removes VideoUtils::GetAvailableAntialiasingModes, and thus VideoUtils entirely, as its only other function was removed in 1f74653501.
Adds two new hotkeys to open the menus for emulated USB devices- Skylanders Portal of Power and the Infinity Base. (Hotkeys only active when game is running).
Portal menu: Default is <Ctrl+P>.
Infinity base: Default is <Ctrl+I>
-The float sliders initial value wasn't calculated correctly
-Fix the checkbox dependencies not being applied until a setting was changed for the first time
The old tooltip description box used GraphicsWidget to provide shared
code to the Graphics config panes for adding descriptions to their
settings.
The description box has been replaced by BalloonTips and serves no
further purpose, so remove it and have the Graphics panes derive from
QWidget instead.
GraphicsInteger is used by the panes in the Graphics config window to
create spin boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigInteger better reflects its
purpose. This should also make it less confusing when ConfigIntegers
are added to other config windows.
GraphicsSlider is used by the panes in the Graphics config window to
create sliders that change their associated config setting, and update
their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigSlider better reflects its
purpose. This should also make it less confusing when ConfigSliders are
added to other config panes.
GraphicsRadioInt is used by the panes in the Graphics config window to
create radio buttons that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigRadioInt better reflects its
purpose. This should also make it less confusing when ConfigRadioInts
are added to other config panes.
m_xrr_config was used by the GeneralWidget::GetAvailableResolutions
function to get the list of supported fullscreen resolutions when
HAVE_XRANDR was set. aa4088a removed the ability to set that resolution
in the UI, leaving the GetAvailableResolutions function unused.
m_xrr_config is initialized in MainWindow which still uses it to toggle
fullscreen, but the references in GeneralWidget and GraphicsWidget
(which just ferried m_xrr_config from MainWindow to GeneralWidget) are
now unnecessary and removed in this commit.
Fixes dynamically changing dpi scaling.
Load resources from svg if possible.
Currently svg support is not in Qt build in Externals,
and image files need to be added later.
GraphicsChoice is used by the panes in the Graphics config window to
create combo boxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigChoice better reflects its
purpose. This should also make it less confusing when ConfigChoices are
eventually added to the other config windows.
GraphicsBool is used by the panes in the Graphics config window to
create checkboxes that change their associated config setting, and
update their own state when something else changes the config setting.
Despite its current name nothing about this class is particular to the
Graphics window, so renaming it to ConfigBool better reflects its
purpose. This should also make it less confusing when ConfigBools are
eventually added to the other config windows.
In older versions of Dolphin GraphicsBoolEx was used to create a pair of
radio buttons selecting one of Virtual XFB and Real XFB, but this was
removed with the introduction of Hybrid XFB in 65cd085f.
In the meantime GraphicsRadioInt was introduced to allow for Graphics
radio buttons with multiple options, so GraphicsBoolEx is now redundant.
The m_verbosity_debug button was only conditionally being added as
widget, this was done in order to hide the object, but this left it
unmanaged.
Unconditionally adding it to the layout and controlling it's visibility
will resolve these issues
Admiral H. Curtiss