byuu says:
Changelog:
- md/vdp: added full interlace emulation [byuu, Sik, Eke, Mask of
Destiny]
- md/vdp: fix an issue with overscan/highlight when setting was
disabled [hex\_usr]
- md/vdp: serialize field, and all oam/objects state
- icarus/md: do not enable RAM unless header 0x1b0-1b1 == "RA"
[hex\_usr]
I really can't believe how difficult the interlace support was to add. I
must have tried a hundred combinations of adjusting Y, Vscroll, tile
addressing, heights, etc. Many of the changes were a wash that improved
some things, regressed others.
In the end I ended up needing input from three different people to
implement what should have been trivial. I don't know if the Mega Drive
is just that weird, if I've declined that much in skill since the days
when I implemented SNES interlace, or if I've just never been that good.
But either way, I'm disappointed in myself for not being able to figure
either this or shadow/highlight out on my own. Yet I'm extremely
grateful to my friends for helping carry me when I get stuck.
Since it wasn't ever documented before, I'm going to try and document
the changes necessary to implement interlace mode for any future
emudevs.
Also, some of the text in the higan and icarus settings docs wanted to
link to a discussion of why we ignore manifests by default; now we have
such a thing.
byuu says:
Changelog:
- md/vdp: backgrounds always update priority bit output [Cydrak]
- md/vdp: vcounter.d0 becomes vcounter.d8 in interlace mode 3
- md/vdp: return field number in interlace modes from status register
- md/vdp: rework scanline/frame counting in main loop so first frame
won't clock to field 1 instead of field 0
- md/vdp: add support for shadow/highlight mode; optimize to minimal
code [Cydrak]
- md/vdp: update outputPixel() to support interlace modes
- sfc/cpu: auto joypad polling start should clear the shift registers;
fixes Nuke (PD)
- thanks to BMF54123 for this bug report
- tomoko: if an invalid video/audio/input driver is found in the
configuration file, it's reset to "None"
- prevents showing the wrong driver under advanced settings; no
longer requires possibly two reboots to fix
Note: the Mega Drive interlace mode 1 should be working fully, but I
don't know any games that use it. Interlace mode 3 (Sonic 2's two-player
mode) does not work at all yet, but this is a good start.
Also, moved the "you should install the GBA BIOS" advice from the
install pages (where I doubt anybody would see it) to the "importing and
playing" guide, which I figure people are more likely to stumble across.
The actually instructions are still in `install/general.md` for lack of
anywhere more appropriate.
byuu says:
Changelog:
- gba/cpu: synchronize to the PPU, not oneself, when the CPU is
stopped
- this bug was patched in the official v104 release; but not in
the .tar.xz archive
- ms/vdp: backdrop color is on the second 16-entry palette, not the
first [hex\_usr]
- ms/vdp: fix background color 0 priority; fixes Alex Kidd in High
Tech World text boxes [hex\_usr]
- tomoko: choose first option when loading files via the command-line
[hex\_usr]
- icarus: lo/hi RAM addressing was backwards; M68K is big endian;
fixes save files in Sonic 3
Many thanks to hex\_usr for the Master System / Game Gear VDP fix.
That's a tricky system to get good technical information on. The fix
should be correct, but please report if you spot any regressions just in
case.
[As mentioned in the v104 internal release notes, byuu fixed a small typo in
the GBA core. -Ed.]
byuu says:
There are lots of improvements in this new release, both to core
emulation and to the user interface. However, some of these changes are
quite substantial, so regressions are a possibility. Please report any
regressions from v103 on the forums if found.
Note that Mega Drive save RAM files will not be compatible with v103,
but will now be compatible with save RAM files from all other Mega Drive
emulators, and the format will be stable going forward.
Also!! Thanks to the tireless work of Screwtape, the
Help->Documentation link in higan now takes you to a very comprehensive
user guide. Please be sure to consult this if you have any questions
about using higan.
Lastly, I've added a link to my Patreon page (https://patreon.com/byuu/)
to the higan downloads page. The money will go exclusively toward
purchasing SNES games for preservation, hardware and flash carts for
reverse engineering, equipment such as backup drives, etc. Donating is
entirely optional and comes with no rewards, but would of course be
greatly appreciated! ^^;
Changelog (since v103):
- nall/dsp: improved first-order IIR filtering
- Famicom: improved audio filtering (90hz lowpass + 440hz lowpass +
14khz highpass)
- Game Boy Advance: corrected bug in PSG wave channel emulation
[Cydrak]
- Mega Drive: added first-order 2.84KHz low-pass filter to match VA6
model hardware
- Mega Drive: lowered PSG volume relative to YM2612 to match VA6 model
hardware
- Mega Drive: Hblank flag is not always set during Vblank
- Mega Drive: fix PAL mode reporting from control port reads
- Famicom: improved phase duty cycle emulation (mode 3 is 25% phase
inverted; counter decrements)
- Mega Drive: reset does not cancel 68K bus requests
- Mega Drive: 68K is not granted bus access on Z80 reset
- Mega Drive: CTRL port is now read-write, maintains value across
controller changes
- Z80: IX, IY override mode can now be serialized in save states
- 68K: fixed calculations for ABCD, NBCD, SBCD [hex\_usr,
SuperMikeMan]
- SPC700: improved all cycle timings to match results observed by
Overload with a logic anaylzer
- Super Famicom: SMP uses a separate 4x8-bit buffer for $f4-f7; not
APU RAM [hex\_usr]
- Super Famicom: SMP TEST register is now finally 100% fully emulated
[byuu, AWJ]
- Game Boy Advance: DMA can run between CPU instruction cycles
- Game Boy Advance: added 2-cycle delay between DMA activation and
transfers
- higan: improved aspect ratio correction accuracy at higher video
scaling sizes
- higan: overscan masking will now actually crop the underlying video
instead of just blanking it
- Mega Drive: center video when overscan is disabled
- higan: added increment/decrement quick save slot hotkeys
- Game Boy Advance: fixed wave RAM nibble ordering (fixes audio in
Castlevania, Pocket NES)
- higan: added new adaptive windowed mode: resizes the window to the
current emulated system's size
- higan: added new integral scaling mode: resizes the window to fill
as much of the screen as possible
- higan: main window is now resizable and will automatically scale
contents based on user settings
- higan: fixed one-time blinking of the main window on startup caused
by focus stealing bug
- ruby: fixed major memory leak in Direct3D driver
- ruby: added fullscreen exclusive mode to Direct3D driver
- Super Famicom: corrected latching behavior of BGnHOFS PPU registers
- higan: all windows sans the main viewport can be dismissed with the
escape key now
- ruby: complete API rewrite; many audio drivers now support device
selection
- higan: output frequency can now be modified
- higan: configuration settings split to individual menu options for
faster access to individual pages
- ruby: improved WASAPI driver to event-driven model; more compatible
in exclusive mode now
- libco: fix compilation of sjlj and fiber targets [Screwtape]
- ruby: added YV12 and I420 support to X-Video driver
- Game Boy: added TAMA emulation (RTC emulation is not working yet)
[thanks to endrift for notes]
- Game Boy: correct data ordering of MMM01 ROMs (MMM01 ROMs will need
to be re-imported into higan)
- Game Boy: store MBC2 save RAM as 256-bytes instead of 512-bytes (RAM
is 4-bit; not 8-bit with padding)
- Game Boy: fixed a bug with RAM serialization in games without a
battery
- Mega Drive: fix CRAM reads (fixes Sonic Spinball) [hex\_usr]
- Game Boy: added rumble support to MBC5 games such as Pokemon Pinball
- Game Boy: added MBC7 emulation (accelerometer X-axis, EEPROM not
working yet) [thanks to endrift for notes]
- hiro: macOS compilation fixes and UI improvements [MerryMage,
ncbncb]
- Game Boy: added MBC6 emulation (no phone link or flash support;
timing bugs in game still)
- Game Boy: HDMA syncs to other components after each byte transfer
now
- Game Boy: disabling the LCD completely halts the PPU (fixes onscreen
graphical corruption in some games)
- Mega Drive: added 6-button Fighting Pad emulation [hex\_usr]
- 68K: TAS sets d7 when EA mode is a direct register (fixes Asterix
graphical corruption)
- Game Boy: STAT mode is forced to zero when LCD is disabled (fixes
Pokemon Pinball)
- LR35902: complete rewrite
- icarus: high-DPI is not supported on Windows yet; remove setting for
consistency with higan window sizes
- hiro: added full support for high-DPI displays on macOS [ncbncb]
- ARM7TDMI: complete rewrite
- Super Famicom: disabled channels during HDMA initialization appear
to set DoTransfer flag
- V30MZ: code cleanup
- Mega Drive: added optional TMSS emulation; disabled by default
[hex\_usr]
- ARM7TDMI: pipeline decode stage caches CPSR.T [MerryMage]
- ARM7TDMI: fixed timing of THUMB stack multiple instruction
[Cydrak]
- higan: detect when ruby drivers crash; disable drivers on next
startup to prevent crash loop
- Mega Drive: added automatic region detection (favors NTSC-J >
NTSC-U > PAL) [hex\_usr]
- Mega Drive: support 8-bit SRAM
- ARM7TDMI: PC should be incremented by 2 when setting CPSR.T via MSR
instruction [MerryMage]
- ruby: add Windows ASIO driver support (does not work on some systems
due to buggy vendor drivers)
- higan: default to safe drivers on a new install; due to instability
with some optimal drivers
The existing documentation was getting *way* too long to be a single
document.
I've just bulk moved the existing content into the new structure, but it
definitely needs another pass to make the prose match, fix hyperlinks,
etc. etc.
Tim Allen