ShuriZma
/
bsnes
mirror of https://github.com/bsnes-emu/bsnes.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
bsnes/higan/sfc/system/system.cpp

220 lines
6.9 KiB
C++
Raw Normal View History

Update to v088r07 release. byuu says: (r05 and r06 were save points between large core modifications) I would really appreciate extensive regression testing (especially around SuperFX, Cx4, ST018, DSP-n, ST-01n, NES, GB) at this point. The most critical core changes should be completed now. And it was an unbelievable amount of restructuring. Changelog: - SuperFX core moved to Processor::GSU - SNES::CPU core moved to Processor::R65816 - SNES::SMP core moved to Processor::SPC700 - NES::CPU core renamed to Processor::R6502 - use filestream to load RAM files from interface - save states store SHA256 instead of CRC32 (CRC32 usage removed entirely from bsnes) - nes/ -> fc/ and NES -> FC - snes/ -> sfc/ and SNES -> SFC - SuperFamicom::MappedRAM::copy uses stream instead of data+size - Linux port uses gcc-4.7 (still using only gcc-4.6 subset, so you can make a gcc-4.6 symlink for now if you like.) - all profiles and all targets compile and work properly All eight instruction set cores have been moved to processor/ now. Consistency's a wonderful thing. The last remnants of NES/SNES are now limited to target-ui code; and the nall/(system) folder names. I'm building with gcc-4.7 on my Linux box now because the resultant binaries are up to 20% faster (seriously) than gcc-4.6.
2012-04-29 06:16:44 +00:00
#include <sfc/sfc.hpp>
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v088r01 release. byuu says: - GB::CPU::Core -> Processor::LR35902 - Processor::LR35902 -> jump table to switch table - GB::LCD -> GB::PPU - static frequency for DMG (no multiplication on clock ticks) - GB::PPU::interface->videoRefresh() moved outside scheduler (use host thread) - namespace NES -> Famicom - namespace SNES -> SuperFamicom - namespace GB -> GameBoy - namespace GBA -> GameBoyAdvance - removed boot.rom writeout in GB::System
2012-04-26 10:51:13 +00:00
namespace SuperFamicom {
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
System system;
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
#include "device.cpp"
Update to v097r01 release. byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here.
2016-01-23 07:29:34 +00:00
#include "random.cpp"
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
#include "serialization.cpp"
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
auto System::loaded() const -> bool { return _loaded; }
Update to v097r01 release. byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here.
2016-01-23 07:29:34 +00:00
auto System::region() const -> Region { return _region; }
auto System::expansionPort() const -> Device::ID { return _expansionPort; }
auto System::cpuFrequency() const -> uint { return _cpuFrequency; }
auto System::apuFrequency() const -> uint { return _apuFrequency; }
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::run() -> void {
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
scheduler.enter();
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::runToSave() -> void {
Update to v097r13 release. byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database.
2016-02-09 11:51:12 +00:00
if(CPU::Threaded) scheduler.synchronize(cpu.thread);
if(SMP::Threaded) scheduler.synchronize(smp.thread);
if(PPU::Threaded) scheduler.synchronize(ppu.thread);
if(DSP::Threaded) scheduler.synchronize(dsp.thread);
for(auto chip : cpu.coprocessors) {
scheduler.synchronize(chip->thread);
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
}
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::init() -> void {
Update to v089r07 release. byuu says: Not even purify makes compatible images for this WIP. Unless you want to figure it out yourself, I'd suggest waiting for an updated tool before using subsequent WIPs. Changelog: - MSU1 initializes data port + audio track to 0 - MSU1 implements audio track error flag on $2000.d3 - manifest.xml now controls file names for cartridge folders ... mostly Regressions: - Super Game Boy support is broken - Sufami Turbo support is broken So, basically Emulator::Interface() now has: void load(const string &manifest); void save(); The first one will analyze the manifest, and call all the ROM + RAM loadRequest() commands necessary to run the game. The second one will call saveRequest() commands on all writable and non-volatile storage (basically if it's a RAM type and has a filename specified, it gets saved to disk.) save() shrinks the size of Emulator::Interface() by hiding information one is unlikely to care about. It also makes it much easier to save. The core auto-calls this when you unload a game as well. So the only time you ever have to worry about it is if you want to save RAM files mid-game (in case you want to do periodic backups in case of a crash.)
2012-05-26 08:18:42 +00:00
assert(interface != nullptr);
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v095r05 release. byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices.
2015-11-12 10:15:03 +00:00
satellaview.init();
Update to v097r21 release. byuu says: Changelog: - icarus: WS/C detects RAM type/size heuristically now - icarus: WS/C uses ram type=$type instead of $type - WS: use back color instead of white for backdrop - WS: fixed sprite count limit; removes all the garbled sprites from GunPey - WS: hopefully fixed sprite priority with screen 2 - WS: implemented keypad polling; GunPey is now fully playable - SNES: added Super Disc expansion port device (doesn't do anything, just for testing) Note: WS is hard-coded to vertical orientation right now. But there's basic code in there for all the horizontal stuff.
2016-03-02 11:19:33 +00:00
superdisc.init();
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
eboot.init();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
Update to v073r02 release. byuu says: Changelog: - removed bsnes/supergameboy (libgameboy -> libgambatte binding) - added direct ICD2-R coprocessor emulation - linked in bgameboy to the ICD2-R module - Makefile removes -Isnes, all files adjusted from <name.hpp> to <snes/name.hpp> [relic from asnes split] You can now play Super Game Boy games with the core bsnes library.
2011-01-08 09:58:41 +00:00
icd2.init();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
mcc.init();
Update to v078r05 release. byuu says: This WIP adds Nintendo Super System emulation, at least of its DIP switches. This is done via XML mapping, like so: <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <name>ActRaiser</name> <rom> <map mode="linear" address="00-7f:8000-ffff"/> <map mode="linear" address="80-ff:8000-ffff"/> </rom> <nss> <setting name="Difficulty"> <option value="0000" name="Easy"/> <option value="0001" name="Normal"/> <option value="0002" name="Hard"/> <option value="0003" name="Expert"/> </setting> <setting name="Lives"> <option value="0000" name="5 lives"/> <option value="0004" name="4 lives"/> <option value="0008" name="3 lives"/> <option value="000c" name="2 lives"/> </setting> </nss> </cartridge> The value field is a 16-bit value. All selected options are ORed together to produce the final DIP switch values. The number of options per setting is unlimited, but there are only sixteen settings allowed (you can't have more settings than you have switches, that's just stupid.) In the example above, d0-d1 controls difficulty, and d2-d3 controls # of lives. d4-d15 appear to be unused, as far as I can tell.
2011-05-06 14:16:46 +00:00
nss.init();
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
event.init();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
sa1.init();
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
superfx.init();
Update to v086r08 release. byuu says: Contains the fledgling beginnings of an ARM CPU core, which can execute the first three and a half instructions of the ST-0018. It's a start, I guess.
2012-02-26 07:59:44 +00:00
armdsp.init();
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
hitachidsp.init();
necdsp.init();
epsonrtc.init();
sharprtc.init();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
spc7110.init();
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
sdd1.init();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
obc1.init();
msu1.init();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
bsmemory.init();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v097r01 release. byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here.
2016-01-23 07:29:34 +00:00
device.connect(0, (Device::ID)settings.controllerPort1);
device.connect(1, (Device::ID)settings.controllerPort2);
device.connect(2, (Device::ID)settings.expansionPort);
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::term() -> void {
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::load() -> void {
Update to v094r39 release. byuu says: Changelog: - SNES mid-scanline BGMODE fixes finally merged (can run atx2.zip{mode7.smc}+mtest(2).sfc properly now) - Makefile now discards all built-in rules and variables - switch on bool warning disabled for GCC now as well (was already disabled for Clang) - when loading a game, if any required files are missing, display a warning message box (manifest.bml, program.rom, bios.rom, etc) - when loading a game (or a game slot), if manifest.bml is missing, it will invoke icarus to try and generate it - if that fails (icarus is missing or the folder is bad), you will get a warning telling you that the manifest can't be loaded The warning prompt on missing files work for both games and the .sys folders and their files. For some reason, failing to load the DMG/CGB BIOS is causing a crash before I can display the modal dialog. I have no idea why, and the stack frame backtrace is junk. I also can't seem to abort the failed loading process. If I call Program::unloadMedia(), I get a nasty segfault. Again with a really nasty stack trace. So for now, it'll just end up sitting there emulating an empty ROM (solid black screen.) In time, I'd like to fix that too. Lastly, I need a better method than popen for Windows. popen is kind of ugly and flashes a console window for a brief second even if the application launched is linked with -mwindows. Not sure if there even is one (I need to read the stdout result, so CreateProcess may not work unless I do something nasty like "> %tmp%/temp") I'm also using the regular popen instead of _wpopen, so for this WIP, it won't work if your game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
interface->loadRequest(ID::SystemManifest, "manifest.bml", true);
auto document = BML::unserialize(information.manifest);
Update to v092 release. In the release thread, byuu says: The first official release of higan has been posted. higan is the new name for bsnes, and it continues with the latter's version numbering. Note that as of now, bsnes still exists. It's a module distributed inside of higan. bsnes is now specific to my SNES emulator. Due to last minute changes to the emulator interface, and missing support in ananke, I wasn't able to include Cydrak's Nintendo DS emulator dasShiny in this build, but I hope to do so in the next release. http://code.google.com/p/higan/downloads/list For both new and experienced users, please read the higan user guide first: http://byuu.org/higan/user-guide In the v091 WIP thread, byuu says: r15->r16: - BS-X MaskROM handling (partial ... need to split bsx/flash away from sfc/chip, restructure code - it requires tagging the base cart markup for now, but it needs to parse the slotted cart markup) - phoenixflags / phoenixlink += -m32 - nall/sort stability - if(input.poll(scancode[activeScancode]) == false) return; - MSU1 / USART need to use interface->path(1) - MSU1 needs to use Markup::Document, not XML::Document - case-insensitive folder listings - remove nall/emulation/system.hpp files (move to ananke) - remove rom/ram id= checks with indexing X have cores ask for manifest.bml (skipped for v092's release, too big a change) - rename compatibility profile to balanced (so people don't assume it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
Update to v094r39 release. byuu says: Changelog: - SNES mid-scanline BGMODE fixes finally merged (can run atx2.zip{mode7.smc}+mtest(2).sfc properly now) - Makefile now discards all built-in rules and variables - switch on bool warning disabled for GCC now as well (was already disabled for Clang) - when loading a game, if any required files are missing, display a warning message box (manifest.bml, program.rom, bios.rom, etc) - when loading a game (or a game slot), if manifest.bml is missing, it will invoke icarus to try and generate it - if that fails (icarus is missing or the folder is bad), you will get a warning telling you that the manifest can't be loaded The warning prompt on missing files work for both games and the .sys folders and their files. For some reason, failing to load the DMG/CGB BIOS is causing a crash before I can display the modal dialog. I have no idea why, and the stack frame backtrace is junk. I also can't seem to abort the failed loading process. If I call Program::unloadMedia(), I get a nasty segfault. Again with a really nasty stack trace. So for now, it'll just end up sitting there emulating an empty ROM (solid black screen.) In time, I'd like to fix that too. Lastly, I need a better method than popen for Windows. popen is kind of ugly and flashes a console window for a brief second even if the application launched is linked with -mwindows. Not sure if there even is one (I need to read the stdout result, so CreateProcess may not work unless I do something nasty like "> %tmp%/temp") I'm also using the regular popen instead of _wpopen, so for this WIP, it won't work if your game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
if(auto iplrom = document["system/smp/rom/name"].text()) {
interface->loadRequest(ID::IPLROM, iplrom, true);
Update to v089r16 release. byuu says: Changelog: - eliminated <mmio>, <mcu> tags [they are merged to their parent nodes now] - added <ram name= size=> tag to EpsonRTC, SharpRTC - added <firmware> tag to DSP-n, ST-01n, ST-018, Cx4 - interface->path(0) now returns the system folder, which can be used for storage now - as a fun proof-of-concept, I've simulated SNES warm power cycles by saving and loading work RAM (same effect if you instantly swapped carts) - long-term, I'm not sure how I want to do this. The power menu option makes no sense with warm RAM - I like the idea of decaying RAM based on timestamp from last play; and power can just force the timestamp to 0 (which will corrupt all RAM) - Interface::firmware is gone. The cores now load firmware inside their boot up routines - you now get a message on the screen if the emulator can't find firmware, should help with "I just get a black screen" messages I'd like to start preparing for a v090 release. I think we're almost there now. Have to update nall/cartridge and purify to handle XML changes first.
2012-07-15 09:47:35 +00:00
}
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
cartridge.load();
Update to v097r01 release. byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here.
2016-01-23 07:29:34 +00:00
_region = cartridge.region() == Cartridge::Region::NTSC ? Region::NTSC : Region::PAL;
_expansionPort = (Device::ID)settings.expansionPort;
Update to v097r13 release. byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database.
2016-02-09 11:51:12 +00:00
_cpuFrequency = region() == Region::NTSC ? 21'477'272 : 21'281'370;
_apuFrequency = 24'606'720;
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v094r39 release. byuu says: Changelog: - SNES mid-scanline BGMODE fixes finally merged (can run atx2.zip{mode7.smc}+mtest(2).sfc properly now) - Makefile now discards all built-in rules and variables - switch on bool warning disabled for GCC now as well (was already disabled for Clang) - when loading a game, if any required files are missing, display a warning message box (manifest.bml, program.rom, bios.rom, etc) - when loading a game (or a game slot), if manifest.bml is missing, it will invoke icarus to try and generate it - if that fails (icarus is missing or the folder is bad), you will get a warning telling you that the manifest can't be loaded The warning prompt on missing files work for both games and the .sys folders and their files. For some reason, failing to load the DMG/CGB BIOS is causing a crash before I can display the modal dialog. I have no idea why, and the stack frame backtrace is junk. I also can't seem to abort the failed loading process. If I call Program::unloadMedia(), I get a nasty segfault. Again with a really nasty stack trace. So for now, it'll just end up sitting there emulating an empty ROM (solid black screen.) In time, I'd like to fix that too. Lastly, I need a better method than popen for Windows. popen is kind of ugly and flashes a console window for a brief second even if the application launched is linked with -mwindows. Not sure if there even is one (I need to read the stdout result, so CreateProcess may not work unless I do something nasty like "> %tmp%/temp") I'm also using the regular popen instead of _wpopen, so for this WIP, it won't work if your game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
bus.reset();
bus.map();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v074r10 release. byuu says: Major WIP, countless changes. I really went to town on cleaning up the source today with all kinds of new ideas. I'll post the ones I remember, use diff -ru to get the rest. What I like the most is my new within template: template<unsigned lo, unsigned hi> alwaysinline bool within(unsigned addr) { static const unsigned mask = ~(hi ^ lo); return (addr & mask) == lo; } Before, you would see code like this: if((addr & 0xe0e000) == 0x206000) { //$20-3f:6000-7fff The comment is basically necessary, and you have to trust that the mask is right, or do the math yourself. Now, it looks like this: if(within<0x20, 0x3f, 0x6000, 0x7fff>(addr)) { That's the same as within<0x206000, 0x3f7fff>, I just made an SNES-variant to more closely simulate my XML mapping style: 20-3f:6000-7fff. Now obviously this has limitations, it only works in base-2 and it can't manage some tricky edge cases like (addr & 0x408000) == 0x008000 for 00-3f|80-bf:8000-ffff. But for the most part, I'll be using this where I can. The Game Boy is fully ported over to it (via the MBCs), but the SNES only has the BS-X town cartridge moved over so far. SuperFX and SA-1 at the very least could benefit. Next up, since the memory map is now static, there's really no reason to remap the entire thing at power-on and reset. So it is now set up at cartridge load and that's it. I moved the CPU/PPU/WRAM mapping out of memory.cpp and into their respective processors. A bit of duplication only because there are multiple processor cores for the different profiles, but I'm not worried about that. This is also going to be necessary to fix the debugger. Next, Coprocessor::enable() actually does what I initially intended it to now: it is called once to turn a chip on after cartridge load. It's not called on power cycle anymore. This should help fix power-cycle on my serial simulation code, and was needed to map the bus exactly one time. Although most stuff is mapped through XML, some chips still need some manual hooks for monitoring and such (eg S-DD1.) Next, I've started killing off memory::, it was initially an over-reaction to the question of where to put APURAM (in the SMP or DSP?). The idea was to have this namespace that contained all memory for everything. But it was very annoying and tedious, and various chips ignored the convention anyway like ST-0011 RAM, which couldn't work anyway since it is natively uint16 and not uint8. Cx4 will need 24-bit RAM eventually, too. There's 8->24-bit functions in there now, because the HLE code is hideous. So far, all the cartridge.cpp memory:: types have been destroyed. memory::cartrom, memory::cartram become cartridge.rom and cartridge.ram. memory::cartrtc was moved into the SRTC and SPC7110 classes directly. memory::bsxflash was moved into BSXFlash. memory::bsxram and memory::bsxpram were moved into BSXCartridge (the town cartridge). memory::st[AB](rom|ram) were moved into a new area, snes/chip/sufamiturbo. The snes/chip moniker really doesn't work so well, since it also has base units, and the serial communications stuff which is through the controller port, but oh well, now it also has the base structure for the Sufami Turbo cartridge too. So now we have sufamiturbo.slotA.rom, sufamiturbo.slotB.ram, etc. Next, the ST-0010/ST-0011 actually save the data RAM to disk. This wasn't at all compatible with my old system, and I didn't want to keep adding memory types to check inside the main UI cartridge RAM loading and saving routines. So I built a NonVolatileRAM vector inside SNES::Cartridge, and any chip that has memory it wants to save and load from disk can append onto it : data, size, id ("srm", "rtc", "nec", etc) and slot (0 = cartridge, 1 = slot A, 2 = slot B) To load and save memory, we just do a simple: foreach(memory, SNES::cartridge.nvram) load/saveMemory(memory). As a result, you can now keep your save games in F1 Race of Champions II and Hayazashi Nidan Morita Shougi. Technically I think Metal Combat should work this way as well, having the RAM being part of the chip itself, but for now that chip just writes directly into cartridge.ram, so it also technically saves to disk for now. To avoid a potential conflict with a manipulated memory map, BS-X SRAM and PSRAM are now .bss and .bsp, and not .srm and .psr. Honestly I don't like .srm as an extension either, but it doesn't bother me enough to break save RAM compatibility with other emulators, so don't worry about that changing. I finally killed off MappedRAM initializing size to ~0 (-1U). A size of zero means there is no memory there just the same. This was an old holdover for handling MMIO mapping, if I recall correctly. Something about a size of zero on MMIO-Memory objects causing it to wrap the address, so ~0 would let it map direct addresses ... or something. Whatever, that's not needed at all anymore. BSXBase becomes BSXSatellaview, and I've defaulted the device to being attached since it won't affect non-BSX games anyway. Eventually the GUI needs to make that an option. BSXCart becomes BSXCartridge. BSXFlash remains unchanged. I probably need to make Coprocessor::disable() functions now to free up memory on unload, but it shouldn't hurt anything the way it is. libsnes is most definitely broken to all hell and back now, and the debugger is still shot. I suppose we'll need some tricky code to work with the old ID system, and we'll need to add some more IDs for the new memory types.
2011-01-24 08:59:45 +00:00
cpu.enable();
ppu.enable();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v095r05 release. byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices.
2015-11-12 10:15:03 +00:00
if(expansionPort() == Device::ID::Satellaview) satellaview.load();
Update to v097r21 release. byuu says: Changelog: - icarus: WS/C detects RAM type/size heuristically now - icarus: WS/C uses ram type=$type instead of $type - WS: use back color instead of white for backdrop - WS: fixed sprite count limit; removes all the garbled sprites from GunPey - WS: hopefully fixed sprite priority with screen 2 - WS: implemented keypad polling; GunPey is now fully playable - SNES: added Super Disc expansion port device (doesn't do anything, just for testing) Note: WS is hard-coded to vertical orientation right now. But there's basic code in there for all the horizontal stuff.
2016-03-02 11:19:33 +00:00
if(expansionPort() == Device::ID::SuperDisc) superdisc.load();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
if(expansionPort() == Device::ID::eBoot) eboot.load();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasICD2()) icd2.load();
if(cartridge.hasMCC()) mcc.load();
if(cartridge.hasNSSDIP()) nss.load();
if(cartridge.hasEvent()) event.load();
if(cartridge.hasSA1()) sa1.load();
if(cartridge.hasSuperFX()) superfx.load();
if(cartridge.hasARMDSP()) armdsp.load();
if(cartridge.hasHitachiDSP()) hitachidsp.load();
if(cartridge.hasNECDSP()) necdsp.load();
if(cartridge.hasEpsonRTC()) epsonrtc.load();
if(cartridge.hasSharpRTC()) sharprtc.load();
if(cartridge.hasSPC7110()) spc7110.load();
if(cartridge.hasSDD1()) sdd1.load();
if(cartridge.hasOBC1()) obc1.load();
if(cartridge.hasMSU1()) msu1.load();
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
if(cartridge.hasBSMemorySlot()) bsmemory.load();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasSufamiTurboSlots()) sufamiturboA.load(), sufamiturboB.load();
Update to v075r01 release. byuu says: Changelog: - fixed Super Game Boy save state support - both SNES and GameBoy only initialize serialize size on cartridge load once now, just like I've already done with memory mapping - added nall/public_cast.hpp for fun ... don't worry, I'm never actually going to use it in production code :D
2011-01-29 09:48:44 +00:00
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
serializeInit();
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
_loaded = true;
Update to v075 release. byuu says: This release brings improved Super Game Boy emulation, the final SHA256 hashes for the DSP-(1,1B,2,3,4) and ST-(0010,0011) coprocessors, user interface improvements, and major internal code restructuring. Changelog (since v074): - completely rewrote memory sub-system to support 1-byte granularity in XML mapping - removed Memory inheritance and MMIO class completely, any address can be mapped to any function now - SuperFX: removed SuperFXBus : Bus, now implemented manually - SA-1: removed SA1Bus : Bus, now implemented manually - entire bus mapping is now static, happens once on cartridge load - as a result, read/write handlers now handle MMC mapping; slower average case, far faster worst case - namespace memory is no more, RAM arrays are stored inside the chips they are owned by now - GameBoy: improved CPU HALT emulation, fixes Zelda: Link's Awakening scrolling - GameBoy: added serial emulation (cannot connect to another GB yet), fixes Shin Megami Tensei - Devichil - GameBoy: improved LCD STAT emulation, fixes Sagaia - ui: added fullscreen support (F11 key), video settings allows for three scale settings - ui: fixed brightness, contrast, gamma, audio volume, input frequency values on program startup - ui: since Qt is dead, config file becomes bsnes.cfg once again - Super Game Boy: you can now load the BIOS without a game inserted to see a pretty white box - ui-gameboy: can be built without SNES components now - libsnes: now a UI target, compile with 'make ui=ui-libsnes' - libsnes: added WRAM, APURAM, VRAM, OAM, CGRAM access (cheat search, etc) - source: removed launcher/, as the Qt port is now gone - source: Makefile restructuring to better support new ui targets - source: lots of other internal code cleanup work
2011-01-27 08:52:34 +00:00
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::unload() -> void {
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
if(!loaded()) return;
Update to v095r05 release. byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices.
2015-11-12 10:15:03 +00:00
if(expansionPort() == Device::ID::Satellaview) satellaview.unload();
Update to v097r21 release. byuu says: Changelog: - icarus: WS/C detects RAM type/size heuristically now - icarus: WS/C uses ram type=$type instead of $type - WS: use back color instead of white for backdrop - WS: fixed sprite count limit; removes all the garbled sprites from GunPey - WS: hopefully fixed sprite priority with screen 2 - WS: implemented keypad polling; GunPey is now fully playable - SNES: added Super Disc expansion port device (doesn't do anything, just for testing) Note: WS is hard-coded to vertical orientation right now. But there's basic code in there for all the horizontal stuff.
2016-03-02 11:19:33 +00:00
if(expansionPort() == Device::ID::SuperDisc) superdisc.unload();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
if(expansionPort() == Device::ID::eBoot) eboot.unload();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasICD2()) icd2.unload();
if(cartridge.hasMCC()) mcc.unload();
if(cartridge.hasNSSDIP()) nss.unload();
if(cartridge.hasEvent()) event.unload();
if(cartridge.hasSA1()) sa1.unload();
if(cartridge.hasSuperFX()) superfx.unload();
if(cartridge.hasARMDSP()) armdsp.unload();
if(cartridge.hasHitachiDSP()) hitachidsp.unload();
if(cartridge.hasNECDSP()) necdsp.unload();
if(cartridge.hasEpsonRTC()) epsonrtc.unload();
if(cartridge.hasSharpRTC()) sharprtc.unload();
if(cartridge.hasSPC7110()) spc7110.unload();
if(cartridge.hasSDD1()) sdd1.unload();
if(cartridge.hasOBC1()) obc1.unload();
if(cartridge.hasMSU1()) msu1.unload();
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
if(cartridge.hasBSMemorySlot()) bsmemory.unload();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasSufamiTurboSlots()) sufamiturboA.unload(), sufamiturboB.unload();
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
cartridge.unload();
_loaded = false;
Update to v074r10 release. byuu says: Major WIP, countless changes. I really went to town on cleaning up the source today with all kinds of new ideas. I'll post the ones I remember, use diff -ru to get the rest. What I like the most is my new within template: template<unsigned lo, unsigned hi> alwaysinline bool within(unsigned addr) { static const unsigned mask = ~(hi ^ lo); return (addr & mask) == lo; } Before, you would see code like this: if((addr & 0xe0e000) == 0x206000) { //$20-3f:6000-7fff The comment is basically necessary, and you have to trust that the mask is right, or do the math yourself. Now, it looks like this: if(within<0x20, 0x3f, 0x6000, 0x7fff>(addr)) { That's the same as within<0x206000, 0x3f7fff>, I just made an SNES-variant to more closely simulate my XML mapping style: 20-3f:6000-7fff. Now obviously this has limitations, it only works in base-2 and it can't manage some tricky edge cases like (addr & 0x408000) == 0x008000 for 00-3f|80-bf:8000-ffff. But for the most part, I'll be using this where I can. The Game Boy is fully ported over to it (via the MBCs), but the SNES only has the BS-X town cartridge moved over so far. SuperFX and SA-1 at the very least could benefit. Next up, since the memory map is now static, there's really no reason to remap the entire thing at power-on and reset. So it is now set up at cartridge load and that's it. I moved the CPU/PPU/WRAM mapping out of memory.cpp and into their respective processors. A bit of duplication only because there are multiple processor cores for the different profiles, but I'm not worried about that. This is also going to be necessary to fix the debugger. Next, Coprocessor::enable() actually does what I initially intended it to now: it is called once to turn a chip on after cartridge load. It's not called on power cycle anymore. This should help fix power-cycle on my serial simulation code, and was needed to map the bus exactly one time. Although most stuff is mapped through XML, some chips still need some manual hooks for monitoring and such (eg S-DD1.) Next, I've started killing off memory::, it was initially an over-reaction to the question of where to put APURAM (in the SMP or DSP?). The idea was to have this namespace that contained all memory for everything. But it was very annoying and tedious, and various chips ignored the convention anyway like ST-0011 RAM, which couldn't work anyway since it is natively uint16 and not uint8. Cx4 will need 24-bit RAM eventually, too. There's 8->24-bit functions in there now, because the HLE code is hideous. So far, all the cartridge.cpp memory:: types have been destroyed. memory::cartrom, memory::cartram become cartridge.rom and cartridge.ram. memory::cartrtc was moved into the SRTC and SPC7110 classes directly. memory::bsxflash was moved into BSXFlash. memory::bsxram and memory::bsxpram were moved into BSXCartridge (the town cartridge). memory::st[AB](rom|ram) were moved into a new area, snes/chip/sufamiturbo. The snes/chip moniker really doesn't work so well, since it also has base units, and the serial communications stuff which is through the controller port, but oh well, now it also has the base structure for the Sufami Turbo cartridge too. So now we have sufamiturbo.slotA.rom, sufamiturbo.slotB.ram, etc. Next, the ST-0010/ST-0011 actually save the data RAM to disk. This wasn't at all compatible with my old system, and I didn't want to keep adding memory types to check inside the main UI cartridge RAM loading and saving routines. So I built a NonVolatileRAM vector inside SNES::Cartridge, and any chip that has memory it wants to save and load from disk can append onto it : data, size, id ("srm", "rtc", "nec", etc) and slot (0 = cartridge, 1 = slot A, 2 = slot B) To load and save memory, we just do a simple: foreach(memory, SNES::cartridge.nvram) load/saveMemory(memory). As a result, you can now keep your save games in F1 Race of Champions II and Hayazashi Nidan Morita Shougi. Technically I think Metal Combat should work this way as well, having the RAM being part of the chip itself, but for now that chip just writes directly into cartridge.ram, so it also technically saves to disk for now. To avoid a potential conflict with a manipulated memory map, BS-X SRAM and PSRAM are now .bss and .bsp, and not .srm and .psr. Honestly I don't like .srm as an extension either, but it doesn't bother me enough to break save RAM compatibility with other emulators, so don't worry about that changing. I finally killed off MappedRAM initializing size to ~0 (-1U). A size of zero means there is no memory there just the same. This was an old holdover for handling MMIO mapping, if I recall correctly. Something about a size of zero on MMIO-Memory objects causing it to wrap the address, so ~0 would let it map direct addresses ... or something. Whatever, that's not needed at all anymore. BSXBase becomes BSXSatellaview, and I've defaulted the device to being attached since it won't affect non-BSX games anyway. Eventually the GUI needs to make that an option. BSXCart becomes BSXCartridge. BSXFlash remains unchanged. I probably need to make Coprocessor::disable() functions now to free up memory on unload, but it shouldn't hurt anything the way it is. libsnes is most definitely broken to all hell and back now, and the debugger is still shot. I suppose we'll need some tricky code to work with the old ID system, and we'll need to add some more IDs for the new memory types.
2011-01-24 08:59:45 +00:00
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::power() -> void {
random.seed((uint)time(0));
Update to v077r01 release. byuu says: Changelog: - fixed auto joypad polling bug (fixes Super Star Wars start button input) - added pseudo-random class; so far it is RAM only [WRAM, APURAM, VRAM, OAM, CGRAM] - added new system configuration options to bsnes.cfg The pseudo-random class is optional. For right now, I am defaulting it to enabled. bsnes.cfg::snes.random = true. You can of course turn it off if you want. This will break Death Brade and Unnamed Euro Racer, no questions about it. So I don't know if I want to leave this on or off by default. Leaving it on will thwart emulator detection code and help to keep code that relies on uninitialized memory from working, but leaving it off will increase compatibility.
2011-03-20 13:57:55 +00:00
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
cpu.power();
smp.power();
dsp.power();
ppu.power();
Update to v095r05 release. byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices.
2015-11-12 10:15:03 +00:00
if(expansionPort() == Device::ID::Satellaview) satellaview.power();
Update to v097r21 release. byuu says: Changelog: - icarus: WS/C detects RAM type/size heuristically now - icarus: WS/C uses ram type=$type instead of $type - WS: use back color instead of white for backdrop - WS: fixed sprite count limit; removes all the garbled sprites from GunPey - WS: hopefully fixed sprite priority with screen 2 - WS: implemented keypad polling; GunPey is now fully playable - SNES: added Super Disc expansion port device (doesn't do anything, just for testing) Note: WS is hard-coded to vertical orientation right now. But there's basic code in there for all the horizontal stuff.
2016-03-02 11:19:33 +00:00
if(expansionPort() == Device::ID::SuperDisc) superdisc.power();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
if(expansionPort() == Device::ID::eBoot) eboot.power();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasICD2()) icd2.power();
if(cartridge.hasMCC()) mcc.power();
if(cartridge.hasNSSDIP()) nss.power();
if(cartridge.hasEvent()) event.power();
if(cartridge.hasSA1()) sa1.power();
if(cartridge.hasSuperFX()) superfx.power();
if(cartridge.hasARMDSP()) armdsp.power();
if(cartridge.hasHitachiDSP()) hitachidsp.power();
if(cartridge.hasNECDSP()) necdsp.power();
if(cartridge.hasEpsonRTC()) epsonrtc.power();
if(cartridge.hasSharpRTC()) sharprtc.power();
if(cartridge.hasSPC7110()) spc7110.power();
if(cartridge.hasSDD1()) sdd1.power();
if(cartridge.hasOBC1()) obc1.power();
if(cartridge.hasMSU1()) msu1.power();
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
if(cartridge.hasBSMemorySlot()) bsmemory.power();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v084r03 release. (r02 was not posted to the WIP thread) byuu says: Internally, all color is processed with 30-bit precision. The filters also operate at 30-bit depth. There's a new config file setting, video.depth, which defaults to 24. This causes the final output to downsample to 24-bit, as most will require. If you set it to 30-bit, the downsampling will not occur, and bsnes will ask ruby for a 30-bit surface. If you don't have one available, you're going to get bad colors. Or maybe even a crash with OpenGL. I don't yet have detection code to make sure you have an appropriate visual in place. 30-bit mode will really only work if you are running Linux, running Xorg at Depth 30, use the OpenGL or XShm driver, have an nVidia Quadro or AMD FireGL card with the official drivers, and have a 30-bit capable monitor. Lots of planning and work for very little gain here, but it's nice that it's finally finished. Oh, I had to change the contrast/brightness formulas a tiny bit, but they still work and look nice.
2011-12-03 03:22:54 +00:00
reset();
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
}
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
auto System::reset() -> void {
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
cpu.reset();
smp.reset();
dsp.reset();
ppu.reset();
Update to v095r05 release. byuu says: Changelog: - GBA: lots of emulation improvements - PPU PRAM is 16-bits wide - DMA masks &~1/Half, &~3/Word - VRAM OBJ 8-bit writes are ignored - OAM 8-bit writes are ignored - BGnCNT unused bits are writable* - BG(0,1)CNT can't set the d13 - BLDALPHA is readable (fixes Donkey Kong Country, etc) - SNES: lots of code cleanups - sfc/chip => sfc/coprocessor - UI: save most recent controller selection GBA test scores: 1552/1552, 37/38, 1020/1260 (* forgot to add the value to the read function, so endrift's I/O tests for them will fail. Fixed locally.) Note: SNES is the only system with multiple controller/expansion port options, and as such is the only one with a "None" option. Because it's shared by the controller and expansion port, it ends up sorted first in the list. This means that on your first run, you'll need to go to Super Famicom->Controller Port 1 and select "Gamepad", otherwise input won't work. Also note that changing the expansion port device requires loading a new cart. Unlike controllers, you aren't meant to hotplug expansion port devices.
2015-11-12 10:15:03 +00:00
if(expansionPort() == Device::ID::Satellaview) satellaview.reset();
Update to v097r21 release. byuu says: Changelog: - icarus: WS/C detects RAM type/size heuristically now - icarus: WS/C uses ram type=$type instead of $type - WS: use back color instead of white for backdrop - WS: fixed sprite count limit; removes all the garbled sprites from GunPey - WS: hopefully fixed sprite priority with screen 2 - WS: implemented keypad polling; GunPey is now fully playable - SNES: added Super Disc expansion port device (doesn't do anything, just for testing) Note: WS is hard-coded to vertical orientation right now. But there's basic code in there for all the horizontal stuff.
2016-03-02 11:19:33 +00:00
if(expansionPort() == Device::ID::SuperDisc) superdisc.reset();
Update to v095r04 release. Changelog: - S-SMP core code style updated - S-SMP loads reset vector from IPLROM ($fffe-ffff) - sfc/base => sfc/expansion - system/input => system/device - added expansion/eBoot (simulation of defparam's SNES-Boot device) - expansion port device can now be selected from Super Famicom menu option - improved GBA MROM/SRAM reading endrift's memory test is up to 1388/1552. Note: I added the expansion port devices to the same group as controller ports. I also had to move "None" to the top of the list. Before v096, I am going to have to add caching of port selections to the configuration file, check the proper default item in the system menu, and remove the items with no mappings from the input configuration window. Lots of work >_>
2015-11-10 11:02:29 +00:00
if(expansionPort() == Device::ID::eBoot) eboot.reset();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasICD2()) icd2.reset();
if(cartridge.hasMCC()) mcc.reset();
if(cartridge.hasNSSDIP()) nss.reset();
if(cartridge.hasEvent()) event.reset();
if(cartridge.hasSA1()) sa1.reset();
if(cartridge.hasSuperFX()) superfx.reset();
if(cartridge.hasARMDSP()) armdsp.reset();
if(cartridge.hasHitachiDSP()) hitachidsp.reset();
if(cartridge.hasNECDSP()) necdsp.reset();
if(cartridge.hasEpsonRTC()) epsonrtc.reset();
if(cartridge.hasSharpRTC()) sharprtc.reset();
if(cartridge.hasSPC7110()) spc7110.reset();
if(cartridge.hasSDD1()) sdd1.reset();
if(cartridge.hasOBC1()) obc1.reset();
if(cartridge.hasMSU1()) msu1.reset();
Update to higan and icarus v095r16 release. byuu says (in the WIP forum): Changelog: - satellaviewcartridge/SatellaviewCartridge is now bsmemory/BSMemory - Emulation/BS-X Satellaview/ is now Emulation/BS Memory/ - masking is in for MCC's mcu (awful hack in the code, but that's temporary) - BS Memory types are now "flash" or "mrom" - fixed loading Same Game - Tengai Hen - icarus fixed up a lot; can load database entries for any supported media type now (only the SFC DB exists currently) mMenu::remove() fix will be in the next WIP. byuu says (in the public beta thread): Changelog: - GBA emulation accuracy improved quite a bit - video shaders are supported once again - icarus shares settings.bml with higan; changing library path in one now affects the other - icarus manifest generation now uses my SNES game dumping database for perfect mapping of US games - major overhaul to manifest file format. As long as you have v095-style folders without manifest.bml, you will be fine - if not, go to higan->settings->configuration->advanced and check "Ignore Manifests" before loading your first game - new "Manifest Viewer" tool (not really meant for regular users; more of a developer tool) - experimental (but disabled in the binary) WASAPI driver. Help stabilizing it would be *greatly* appreciated! - lots of other stuff
2015-12-19 09:00:27 +00:00
if(cartridge.hasBSMemorySlot()) bsmemory.reset();
Update to v094r38 release. byuu says: I'll post more detailed changes later, but basically: - fixed Baldur's Gate bug - guess if no flash ROM ID present (fixes Magical Vacation, many many others) - nall cleanups - sfc/cartridge major cleanups - bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses (consistency with SGB/ICD2) - ... and more!
2015-08-02 06:23:13 +00:00
if(cartridge.hasICD2()) cpu.coprocessors.append(&icd2);
if(cartridge.hasEvent()) cpu.coprocessors.append(&event);
if(cartridge.hasSA1()) cpu.coprocessors.append(&sa1);
if(cartridge.hasSuperFX()) cpu.coprocessors.append(&superfx);
if(cartridge.hasARMDSP()) cpu.coprocessors.append(&armdsp);
if(cartridge.hasHitachiDSP()) cpu.coprocessors.append(&hitachidsp);
if(cartridge.hasNECDSP()) cpu.coprocessors.append(&necdsp);
if(cartridge.hasEpsonRTC()) cpu.coprocessors.append(&epsonrtc);
if(cartridge.hasSharpRTC()) cpu.coprocessors.append(&sharprtc);
if(cartridge.hasSPC7110()) cpu.coprocessors.append(&spc7110);
if(cartridge.hasMSU1()) cpu.coprocessors.append(&msu1);
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
Update to v097r13 release. byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database.
2016-02-09 11:51:12 +00:00
scheduler.reset();
Update to v097r01 release. byuu says: A minor WIP to get us started. Changelog: - System::Video merged to PPU::Video - System::Audio merged to DSP::Audio - System::Configuration merged to Interface::Settings - created emulator/emulator.cpp and accompanying object file for shared code between all cores Currently, emulator.cpp just holds a videoColor() function that takes R16G16B16, performs gamma/saturation/luma adjust, and outputs (currently) A8R8G8B8. It's basically an internal function call for cores to use when generating palette entries. This code used to exist inside ui-tomoko/program/interface.cpp, but we have to move it internal for software display emulation. But in the future, we could add other useful cross-core functionality here.
2016-01-23 07:29:34 +00:00
device.connect(0, (Device::ID)settings.controllerPort1);
device.connect(1, (Device::ID)settings.controllerPort2);
device.connect(2, (Device::ID)settings.expansionPort);
First version split into asnes and bsnes.
2010-08-09 13:28:56 +00:00
}
}