Remove the OMAP2 specific code from omap_mmc.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-42-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
We've removed the OMAP2 SoC, so we can remove the OMAP2 GPIO
device. (The source file remains, as it also has the model of
the OMAP1 GPIO device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-39-peter.maydell@linaro.org
The users of the OMAP2 SoC emulation have been removed, so we can
delete omap2.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-38-peter.maydell@linaro.org
Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org
The OneNAND devices were only used by n800/n810, so they
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-33-peter.maydell@linaro.org
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
Remove the tsc2005 touchscreen controller, which was only used
by the n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-29-peter.maydell@linaro.org
Remove the blizzard display device, which was only used with the
n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-28-peter.maydell@linaro.org
The devices in hw/misc/cbus.c were used only by the
now-removed nseries machine types, so they can be removed.
As this is the last use of the CONFIG_NSERIES define we
can remove that from KConfig now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-27-peter.maydell@linaro.org
Remove the pxa2xx-specific interrupt controller device.
As this is the last user of the pxa.h header file and the
CONFIG_PXA2XX define we can remove those too.
This completes the removal of the pxa2xx specific code. We leave:
* pxa2xx_timer -- still used by the Collie board (strongarm)
* the definitions of the CPUs themselves in target/arm
(still usable by linux-user mode)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-23-peter.maydell@linaro.org
Remove the pxa2xx-specific GPIO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-22-peter.maydell@linaro.org
Remove the pxa2xx specific pcmcia device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-21-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_dma device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-20-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_keypad device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-18-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-17-peter.maydell@linaro.org
All the callers of pxa270_init() and pxa255_init() have now been removed,
so we can remove pxa2xx.c. This also removes the only uses of a lot of
pxa2xx specific devices, which will be removed in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-16-peter.maydell@linaro.org
The tc6393xb was used only by the XScale-based Zaurus machine types.
Now they have been removed we can remove this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-7-peter.maydell@linaro.org
The Cadence GEM peripherals as configured for Zynq MPSoC and Versal
platforms have two priority queues with separate interrupt sources for
each. If the interrupt source for the second priority queue is not
connected, they work in polling mode only. This change connects the
second interrupt source for platforms where it is available. This patch
has been tested using the lwIP stack with a Xilinx-supplied driver from
their embeddedsw repository.
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.
This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().
Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The 'GPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'GPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/GPL-2.0+.html
[2] https://spdx.org/licenses/GPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0+/GPL-2.0-or-later/ \
$(git grep -lP 'SPDX-License-Identifier: \W+GPL-2.0\+[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The last use of sysbus_mmio_unmap was removed by
981b1c6266 ("spapr/xive: rework the mapping the KVM memory regions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Different code paths handle memory accesses:
- tcg generated code
- load/store helpers
- atomic helpers
This value is saved in cpu->neg.plugin_mem_value_{high,low}. Values are
written only for accessed word size (upper bits are not set).
Atomic operations are doing read/write at the same time, so we generate
two memory callbacks instead of one, to allow plugins to access distinct
values.
For now, we can have access only up to 128 bits, thus split this in two
64 bits words. When QEMU will support wider operations, we'll be able to
reconsider this.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-5-alex.bennee@linaro.org>
These were passing a NULL buffer pointer unconditionally, which happens
to behave in a mostly benign way (except for the chance of an excess
memory region unref and a bounce buffer leak). Per the function comment,
this was never meant to be accepted though, and triggers an assertion
with the "softmmu: Support concurrent bounce buffers" change.
Given that the code in question never sets up any mappings, just remove
the unnecessary dma_memory_unmap calls along with the DBDMA_io struct
fields that are now entirely unused.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240916175708.1829059-1-mnissler@rivosinc.com>
Fixes: be1e343995 ("macio: switch over to new byte-aligned DMA helpers")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
-----BEGIN PGP SIGNATURE-----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=DXEK
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu into staging
* Make all qtest targets work with "--without-default-devices"
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbpWwwRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUj2A//VQwwbbuQa4FO/fu8mX0/iL43IZPLkVvC
# XPesidMwEsaNlfnUGLwjr9/F9sU7NXSkEdBWshU69ER9D4FPvRlZ6xOc0GB2HHEm
# 2zYBaQoMvB/g5/FMkp5/YqPc/FvYMxePTX0syJCUkdf9hbM3YJagUgSKaz/2ZJRu
# +wztsRMSGx9WBeabTWgbAtGlfEqtfSGdfFHbNtoEVmO/K3rvcAHJhPXZpSmdq4CV
# ymwYQ3Ul1Sdz/34TzshhkY9VvYU6n1zuB+kGrjPcQrOdBV/ukJuBiFkHfSZm/2ch
# zTqbdXvkds867vHMo9s3JeVKPa8ZytKn4ycXXgVS5AZtrnEnyHztlVHWbwbHSafF
# rVGXnE3FabzKL4sEKGzOjMegnwdWtpBNwMVKUZIgURqDXAVVR2m+lf2pW/Niz2WR
# m0LNIcg0NPvxPwuq1xLVHc3CLNSCszu4Ao5YRhKimf3hb+FvzHty3dxn+DDg4+Q4
# hHqQRcbWILhYJEwcAVkfaMTtCh/RESiNi0U7Teqvr+aqBsJP8kdCkE5rY7cqzrqn
# aDaompDZ8QG1QA1c3NaxtmNsvTvpm8gBySrqbMizo8UHQd85HDdXFkAZfI4HWKDi
# jhZAEyh1HLeXrgDT/D0WBWQdPLjDZewTvqgqT/A5XbdR1u4XYXcxwMCpIN1iKFoY
# 8qu0hIcsILM=
# =DXEK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 11:33:48 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/crossbuilds.yml: Force 'make check' to -j2 for cross-i686-tci
tests/functional: Move the mips64el fuloong2e test into the thorough category
docs/fuzz: fix outdated mention to enable-sanitizers
system: Enable the device aliases for or1k, too
system: Sort QEMU_ARCH_VIRTIO_PCI definition
tests/qtest: remove break after g_assert_not_reached()
tests/qtest: replace assert(false) with g_assert_not_reached()
include/hw/s390x: replace assert(false) with g_assert_not_reached()
tests/unit: replace assert(0) with g_assert_not_reached()
tests/qtest: replace assert(0) with g_assert_not_reached()
gitlab: fix logic for changing docker tag on stable branches
.gitlab-ci.d/buildtest: Build most targets in the build-without-defaults job
tests/qtest: Disable numa-test if the default machine is not available
tests/qtest/meson.build: Add more CONFIG switches checks for the x86 tests
tests/qtest/hd-geo-test: Check for availability of "pc" machine before using it
tests/qtest/boot-order-test: Make the machine name mandatory in this test
tests/qtest/cdrom-test: Improve the machine detection in the cdrom test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-ID: <20240912073921.453203-15-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.
It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.
Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.
Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.
The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.
Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.
An I2C controller registers owns 8KB address space.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.
To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.
Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.
The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.
Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer
Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.
To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.
Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.
Incrementing the version of aspeed_i2c_bus_vmstate to 6.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.
Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15
Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update the Sun mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Note that this conversion adds extra sunmouse_* members to ESCCChannelState
but they are not added to the migration stream (similar to the Sun keyboard
members). If this were desired in future, the Sun devices should be split
into separate devices and added to the migration stream there instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2518
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Carl Hauser <chauser@pullman.com>
Message-ID: <20240904102301.175706-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since its introduction in commit cdbdb648b7 ("ARM Versatile
Platform Baseboard emulation.") PL011State::readbuff as never
been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-3-philmd@linaro.org>
We just removed the single machine calling etraxfs_dmac_init()
(the axis-dev88 machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-11-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-10-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-9-philmd@linaro.org>
sh7750_register_io_device() was only used by the TC58128
NAND EEPROM which has been removed in the previous commit.
Remove it as unused code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-4-philmd@linaro.org>
The TC58128 NAND EEPROM is not user creatable and
needs to be instanciated in the code via tc58128_init().
Only the SHIX machine was using it, and it was removed
in the previous commit. Since the TC58128 has no more
users, remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240903153959.18392-3-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Remove a pointless structure declaration in "designware.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-2-philmd@linaro.org>
This addition will be necessary for some HVF related work to follow.
For HVF on ARM there exists a set of APIs in macOS 13 to be able to
adjust the IPA size for a given VM. This is useful as by default HVF
uses 36 bits as the IPA size, so to support guests with > 64GB of RAM
we'll need to reach for this.
To have all the info necessary to carry this out however, we need some
plumbing to be able to grab the memory map and compute the highest GPA
prior to creating the VM. This is almost exactly like what kvm_type is
used for on ARM today, and is also what this will be used for. We will
compute the highest GPA and find what IPA size we'd need to satisfy this,
and if it's valid (macOS today caps at 40b) we'll set this to be the IPA
size in coming patches. This new method is only needed (today at least)
on ARM, and obviously only for HVF/macOS, so admittedly it is much less
generic than kvm_type today, but it seemed a somewhat sane way to get
the information we need from the memmap at VM creation time.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-2-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed explicit setting of field to NULL on x86]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We used to need the transitional_function machinery to handle bus
classes and device classes which still used their legacy reset
handling. We have now converted all bus classes to three phase
reset, and simplified the device class legacy reset so it is just an
adapting wrapper function around registration of a hold phase method.
There are therefore no more users of the transitional_function
machinery and we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830145812.1967042-12-peter.maydell@linaro.org
Rename the DeviceClass::reset field to legacy_reset; this is helpful
both in flagging up that it's best not used in new code and in
making it easy to search for where it's being used still.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-9-peter.maydell@linaro.org
Define a device_class_set_legacy_reset() function which
sets the DeviceClass::reset field. This serves two purposes:
* it makes it clearer to the person writing code that
DeviceClass::reset is now legacy and they should look for
the new alternative (which is Resettable)
* it makes it easier to rename the reset field (which in turn
makes it easier to find places that call it)
The Coccinelle script can be used to automatically convert code that
was doing an open-coded assignment to DeviceClass::reset to call
device_class_set_legacy_reset() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-7-peter.maydell@linaro.org
There are no callers of device_class_set_parent_reset() left in the tree,
as they've all been converted to use three-phase reset and the
corresponding resettable_class_set_parent_phases() function.
Remove device_class_set_parent_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-5-peter.maydell@linaro.org
Convert the s390 CPU to the Resettable interface. This is slightly
more involved than the other CPU types were (see commits
9130cade5fc22..d66e64dd006df) because S390 has its own set of
different kinds of reset with different behaviours that it needs to
trigger.
We handle this by adding these reset types to the Resettable
ResetType enum. Now instead of having an underlying implementation
of reset that is s390-specific and which might be called either
directly or via the DeviceClass::reset method, we can implement only
the Resettable hold phase method, and have the places that need to
trigger an s390-specific reset type do so by calling
resettable_reset().
The other option would have been to smuggle in the s390 reset
type via, for instance, a field in the CPU state that we set
in s390_do_cpu_initial_reset() etc and then examined in the
reset method, but doing it this way seems cleaner.
The motivation for this change is that this is the last caller
of the legacy device_class_set_parent_reset() function, and
removing that will let us clean up some glue code that we added
for the transition to three-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240830145812.1967042-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
+OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
=Plwu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240912
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
# 38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
# ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
# +OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
# =Plwu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Sep 2024 14:01:34 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Add acpi SPCR table support
hw/loongarch: virt: pass random seed to fdt
hw/loongarch: virt: support up to 4 serial ports
target/loongarch: Support QMP dump-guest-memory
target/loongarch/kvm: Add vCPU reset function
hw/loongarch: Remove default enable with VIRTIO_VGA device
target/loongarch: Add compatible support about VM reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
=ySRy
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
# Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
# LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
# xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
# 24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
# lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
# =ySRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Sep 2024 14:50:29 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/acpi/ich9: Add periodic and swsmi timer
virtio-mem: don't warn about THP sizes on a kernel without THP support
hw/audio/virtio-sound: fix heap buffer overflow
hw/cxl: fix physical address field in get scan media results output
virtio-pci: Add lookup subregion of VirtIOPCIRegion MR
vhost_net: configure all host notifiers in a single MR transaction
tests/acpi: pc: update golden masters for DSDT
hw/i386/acpi-build: Return a pre-computed _PRT table
tests/acpi: pc: allow DSDT acpi table changes
intel_iommu: Make PASID-cache and PIOTLB type invalid in legacy mode
intel_iommu: Fix invalidation descriptor type field
virtio: rename virtio_split_packed_update_used_idx
hw/pci/pci-hmp-cmds: Avoid displaying bogus size in 'info pci'
pci: don't skip function 0 occupancy verification for devfn auto assign
hw/isa/vt82c686.c: Embed i8259 irq in device state instead of allocating
hw: Move declaration of IRQState to header and add init function
virtio: Always reset vhost devices
virtio: Allow .get_vhost() without vhost_started
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to support additional channels of communication using
`-serial`, add several serial ports, up to the standard 4 generally
supported by the 8250 driver.
Fixed: https://lore.kernel.org/all/20240907143439.2792924-1-Jason@zx2c4.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Bibo Mao <maobibo@loongson.cn>
[gaosong: ACPI uart need't reverse order]
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907143439.2792924-1-Jason@zx2c4.com>
This patch implements the periodic and the swsmi ICH9 chipset timers. They are
especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF)
using QEMU.
For backwards compatibility, the compat properties "x-smi-swsmi-timer",
and "x-smi-periodic-timer" are introduced.
Additionally, writes to the SMI_STS register are enabled for the
corresponding two bits using a write mask to make future work easier.
Signed-off-by: Dominic Prinz <git@dprinz.de>
Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the vhost_net device which has multiple virtqueues to batch
the setup of all its host notifiers. This significantly reduces the
vhost_net device starting and stoping time, e.g. the time spend
on enabling notifiers reduce from 630ms to 75ms and the time spend on
disabling notifiers reduce from 441ms to 45ms for a VM with 192 vCPUs
and 15 vhost-user-net devices (64vq per device) in our case.
Signed-off-by: zuoboqun <zuoboqun@baidu.com>
Message-Id: <20240816070835.8309-1-zuoboqun@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To allow embedding a qemu_irq in a struct move its definition to the
header and add a function to init it in place without allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e3ffd0f6ef8845d0f7247c9b6ff33f7ee8b432cf.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Historically, .get_vhost() was probably only called when
vdev->vhost_started is true. However, we now decidedly want to call it
also when vhost_started is false, specifically so we can issue a reset
to the vhost back-end while device operation is stopped.
Some .get_vhost() implementations dereference some pointers (or return
offsets from them) that are probably guaranteed to be non-NULL when
vhost_started is true, but not necessarily otherwise. This patch makes
all such implementations check all such pointers, returning NULL if any
is NULL.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20240723163941.48775-2-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
CpuS390Entitlement has a 'prefix' to change the generated enumeration
constants' prefix from CPU_S390_ENTITLEMENT to S390_CPU_ENTITLEMENT.
Rename the type to S390CpuEntitlement, so that 'prefix' is not needed.
Likewise change CpuS390Polarization to S390CpuPolarization, and
CpuS390State to S390CpuState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-10-armbru@redhat.com>
When DMA memory can't be directly accessed, as is the case when
running the device model in a separate process without shareable DMA
file descriptors, bounce buffering is used.
It is not uncommon for device models to request mapping of several DMA
regions at the same time. Examples include:
* net devices, e.g. when transmitting a packet that is split across
several TX descriptors (observed with igb)
* USB host controllers, when handling a packet with multiple data TRBs
(observed with xhci)
Previously, qemu only provided a single bounce buffer per AddressSpace
and would fail DMA map requests while the buffer was already in use. In
turn, this would cause DMA failures that ultimately manifest as hardware
errors from the guest perspective.
This change allocates DMA bounce buffers dynamically instead of
supporting only a single buffer. Thus, multiple DMA mappings work
correctly also when RAM can't be mmap()-ed.
The total bounce buffer allocation size is limited individually for each
AddressSpace. The default limit is 4096 bytes, matching the previous
maximum buffer size. A new x-max-bounce-buffer-size parameter is
provided to configure the limit for PCI devices.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240819135455.2957406-1-mnissler@rivosinc.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420
43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6
18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Having magic numbers inside the code is not a good idea, as it
is error-prone. So, instead, create a macro with the number
definition.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-PYnZ-32MRX+PgvzhnoAV80zBKMYg61j2f=oHaGfwSsg@mail.gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: ef0e7f5fca6cd94eda415ecee670c3028c671b74.1723121692.git.mchehab+huawei@kernel.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Loongarch IPI inherits from class LoongsonIPICommonClass, and it
only contains Loongarch 3A5000 virt machine specific interfaces,
rather than mix different machine implementations together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-14-philmd@linaro.org>
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
Move the IPICore structure and corresponding common fields
of LoongsonIPICommonState to "hw/intc/loongson_ipi_common.h".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-7-philmd@linaro.org>
It is easier to manage one array of MMIO MR rather
than one per vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-6-philmd@linaro.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-5-philmd@linaro.org>
Introduce LOONGSON_IPI_COMMON stubs, QDev parent of LOONGSON_IPI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-4-philmd@linaro.org>
We'll have to add LoongsonIPIClass in few commits,
so rename LoongsonIPI as LoongsonIPIState for clarity.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-2-philmd@linaro.org>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Additional END state 'info pic' information as added. The 'ignore',
'crowd' and 'precluded escalation control' bits of an Event Notification
Descriptor are all used when delivering an interrupt targeting a VP-group
or crowd.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving xive2_nvp_pic_print_info() to align with the other "pic_print_info"
functions.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for writing a completion notification byte in memory
whenever a cache flush or queue sync inject operation is requested by
software. QEMU does not cache any of the XIVE data that is in memory and
therefore it simply writes the completion notification byte at the time
that the operation is requested.
Co-authored-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit SPI shift engine and sequencer logic is implemented.
Shift engine performs serialization and de-serialization according to the
control by the sequencer and according to the setup defined in the
configuration registers. Sequencer implements the main control logic and
FSM to handle data transmit and data receive control of the shift engine.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPI controller device model supports a connection to a single SPI responder.
This provide access to SPI seeproms, TPM, flash device and an ADC controller.
All SPI function control is mapped into the SPI register space to enable full
control by firmware. In this commit SPI configuration component is modelled
which contains all SPI configuration and status registers as well as the hold
registers for data to be sent or having been received.
An existing QEMU SSI framework is used and SSI_BUS is created.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
[np: Fix FDT macro compile for qtest]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit target specific dependency from include/hw/ppc/pnv_xscom.h
has been removed so that pnv_xscom.h can be included outside hw/ppc.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Recent POWER CPUs can operate in "LPAR per core" or "LPAR per thread"
modes. In per-core mode, some SPRs and IPI doorbells are shared between
threads in a core. In per-thread mode, supervisor and user state is
not shared between threads.
OpenPOWER systems after POWER8 use LPAR per thread mode, and it is
required for KVM. Enterprise systems use LPAR per core mode, as they
partition the machine by core.
Implement a lpar-per-core machine option for powernv machines. This
is fixed true for POWER8 machines, and defaults off for P9 and P10.
With this change, powernv8 SMT now works sufficiently to run Linux,
with a single socket. Multi-threaded KVM guests still have problems,
as does multi-socket Linux boot.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Peter Maydell