Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Netbsd isn't happy with qemu lsi53c895a emulation:
cd0(esiop0:0:2:0): command with tag id 0 reset
esiop0: autoconfiguration error: phase mismatch without command
esiop0: autoconfiguration error: unhandled scsi interrupt, sist=0x80 sstat1=0x0 DSA=0x23a64b1 DSP=0x50
This is because lsi_bad_phase() triggers a phase mismatch, which
stops SCRIPT processing. However, after returning to
lsi_command_complete(), SCRIPT is restarted with lsi_resume_script().
Fix this by adding a return value to lsi_bad_phase(), and only resume
script processing when lsi_bad_phase() didn't trigger a host interrupt.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Helge Deller <deller@gmx.de>
Message-ID: <20240302214453.2071388-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HP-UX 10.20 seems to make the lsi53c895a spinning on a memory location
under certain circumstances. As the SCSI controller and CPU are not
running at the same time this loop will never finish. After some
time, the check loop interrupts with a unexpected device disconnect.
This works, but is slow because the kernel resets the scsi controller.
Instead of signaling UDC, start a timer and exit the loop. Until the
timer fires, the CPU can process instructions which might changes the
memory location.
The limit of instructions is also reduced because scripts running on
the SCSI processor are usually very short. This keeps the time until
the loop is exit short.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240229204407.1699260-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some Windows versions crash at boot or fail to enable the VMBus device if
they don't see the expected set of Hyper-V features (enlightenments).
Since this provides poor user experience let's warn user if the VMBus
device is enabled without the recommended set of Hyper-V features.
The recommended set is the minimum set of Hyper-V features required to make
the VMBus device work properly in Windows Server versions 2016, 2019 and
2022.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Since the presence of a hot add memory region is optional in hot add
request message it wasn't part of this message declaration
(struct dm_hot_add).
Instead, the code allocated such enlarged message by simply adding the
necessary size for this extra field to the size of basic hot add message
struct.
However, Coverity considers accessing this extra member to be
an out-of-bounds access, even thought the memory is actually there.
Fix this by adding an extended variant of this message that explicitly has
an additional union dm_mem_page_range at its end.
CID: #1523903
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
alloca() is frowned upon, replace it with g_malloc0() + g_autofree.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
MCFG segments should point to PCI configuration range, not BAR MMIO.
Signed-off-by: Ilya Chugin <danger_mail@list.ru>
Fixes: 55ecd83b36 ("hw/riscv/virt-acpi-build.c: Add IO controllers and devices")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Message-ID: <180d236d-c8e4-411a-b4d2-632eb82092fa@list.ru>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The writes to setipnum_le register in APLIC MSI-mode have special
consideration for level-triggered interrupts as-per section "4.9.2
Special consideration for level-sensitive interrupt sources" of the
RISC-V AIA specification.
Particularly, the below text from the RISC-V specification defines
the behaviour of writes to setipnum_le for level-triggered interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le write emulation for APLIC MSI-mode by implementing
the above behaviour in riscv_aplic_set_pending() function.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'virt' machine makes assumptions on the Advanced Core-Local
Interruptor, or aclint, based on 'tcg_enabled()' conditionals. This
will impact MSI related tests support when adding a RISC-V 'virt' libqos
machine. The accelerator used in that case, 'qtest', isn't being
accounted for and we'll error out if we try to enable aclint.
Create a new virt_aclint_allowed() helper to gate the aclint code
considering both TCG and 'qtest' accelerators. The error message is
left untouched, mentioning TCG only, because we don't expect the
regular user to be aware of 'qtest'.
We want to add 'qtest' support for aclint only, leaving the TCG specific
bits out of it. This is done by changing the current format we use
today:
if (tcg_enabled()) {
if (s->have_aclint) { - aclint logic - }
else { - non-aclint, TCG logic - }
}
into:
if (virt_aclint_allowed() && s->have_aclint) {
- aclint logic -
} else if (tcg_enabled()) {
- non-aclint, TCG logic -
}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a RISC-V 'virt' libqos machine to increase our test
coverage. Some of the tests will try to plug a virtio-iommu-pci
device into the board and do some tests with it.
Enable virtio-iommu-pci in the 'virt' machine.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Hotplugged FDT nodes will attempt to write this node that, at this
moment, is being created only in create_fdt_pcie() during
finalize_fdt().
Create it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enable ACPI NUMA support by adding the following 2 ACPI tables:
SRAT: provides the association for memory/Harts and Proximity Domains
SLIT: provides the relative distance between Proximity Domains
The SRAT RINTC Affinity Structure definition[1] was based on the recently
approved ACPI CodeFirst ECR[2].
[1] https://github.com/riscv-non-isa/riscv-acpi/issues/25
[2] https://mantis.uefi.org/mantis/view.php?id=2433
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240129094200.3581037-1-haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the initrd is placed at 128MB, which overlaps with the kernel
when it is large (for example syzbot kernels are). From the kernel side,
there is no reason we could not push the initrd further away in memory
to accommodate large kernels, so move the initrd at 512MB when possible.
The ideal solution would have been to place the initrd based on the
kernel size but we actually can't since the bss size is not known when
the image is loaded by load_image_targphys_as() and the initrd would
then overlap with this section.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240206154042.514698-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate Serial Port Console Redirection Table (SPCR) for RISC-V
virtual machine.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240129021440.17640-3-jeeheng.sia@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V should also generate the SPCR in a manner similar to ARM.
Therefore, instead of replicating the code, relocate this function
to the common AML build.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240129021440.17640-2-jeeheng.sia@starfivetech.com>
[ Changes by AF:
- Add missing Language SPCR entry
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sun4v RTC device model added under commit a0e893039c in 2016
was unfortunately added with a license of GPL-v3-or-later, which is
not compatible with other QEMU code which has a GPL-v2-only license.
Relicense the code in the .c and the .h file to GPL-v2-or-later,
to make it compatible with the rest of QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240223161300.938542-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Features supported :
- the 8 STM32L4x5 GPIOs are initialized with their reset values
(except IDR, see below)
- input mode : setting a pin in input mode "externally" (using input
irqs) results in an out irq (transmitted to SYSCFG)
- output mode : setting a bit in ODR sets the corresponding out irq
(if this line is configured in output mode)
- pull-up, pull-down
- push-pull, open-drain
Difference with the real GPIOs :
- Alternate Function and Analog mode aren't implemented :
pins in AF/Analog behave like pins in input mode
- floating pins stay at their last value
- register IDR reset values differ from the real one :
values are coherent with the other registers reset values
and the fact that AF/Analog modes aren't implemented
- setting I/O output speed isn't supported
- locking port bits isn't supported
- ADC function isn't supported
- GPIOH has 16 pins instead of 2 pins
- writing to registers LCKR, AFRL, AFRH and ASCR is ineffective
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can generate reliable clock frequencies from the RCC, remove
the hacky definition of the sysclk in the b_l475e_iot01a initialisation
code and use the correct RCC clock.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add write protections for the fields in the CR register.
PLL configuration write protections (among others) have not
been handled yet. This is planned in a future patch set.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Update the RCC state and propagate frequency changes when writing to the
RCC registers. Currently, ICSCR, CIER, the reset registers and the stop
mode registers are not implemented.
Some fields have not been implemented due to uncertainty about
how to handle them (Like the clock security system or bypassing
mecanisms).
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the whole clock tree and using the Clock multiplexers and
the PLLs defined in the previous commits. This allows to statically
define the clock tree and easily follow the clock signal from one end to
another.
Also handle three-phase reset now that we have defined a known base
state for every object.
(Reset handling based on hw/misc/zynq_sclr.c)
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object represents the PLLs and their channels. The PLLs allow for a
more fine-grained control of the clocks frequency.
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object is used to represent every multiplexer in the clock tree as
well as every clock output, every presecaler, frequency multiplier, etc.
This allows to use a generic approach for every component of the clock tree
(except the PLLs).
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds loopback for sent characters, sent BREAK,
and modem-control signals.
Loopback of send and modem-control is often used for uart
self tests in real hardware but missing from current pl011
model, resulting in self-test failures when running in QEMU.
This implementation matches what is observed in real pl011
hardware placed in loopback mode:
1. Input characters and BREAK events from serial backend
are ignored, but
2. Both TX characters and BREAK events are still sent to
serial backend, in addition to be looped back to RX.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240227054855.44204-1-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BCM2835 has three I2C controllers. All of them share the same interrupt line.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A few deficiencies in the current device model need to be noted.
1. FIFOs are not used. All sends and receives are done directly.
2. Repeated starts are not emulated. Repeated starts can be triggered in real
hardware by sending a new read transfer request in the window time between
transfer active set of write transfer request and done bit set of the same.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix GIC settings when using --without-default-devices
* Fix USB PCAP streams on Windows
* Remove temporary files from test-util-sockets
* Fix TLS io channels sending too much data to the backend
-----BEGIN PGP SIGNATURE-----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=9JAI
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu into staging
* Fix some bugs in the vring setup of libqos
* Fix GIC settings when using --without-default-devices
* Fix USB PCAP streams on Windows
* Remove temporary files from test-util-sockets
* Fix TLS io channels sending too much data to the backend
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXhjBcRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWzZw/+OTSsKg6JTX0z3fjL6If+Ns/EnFiniHHI
# y1jR7fPub3ybFokgHIWrRVG+9ol+1tJuPlO5Bsx1SKFzNC8++l1iyK7E25xnmp2P
# Ry/Z0ZSWp3JWCtLm6km5pKl3wWI9p0XwfUOJbCWYM5dOsd2a4C4DSvjcwNXR7pTB
# 4AxXFj5G5UwXuffgPnBzeerm5baNweSqa/uczUY6Od+iJwmHpaSk0SJ4NIlIYvnS
# z3BH81trQAoKYZyywp0aF+jH9w3YNwD1XDp2Bcf3qSWDdokN55V13yyiSllTfUwX
# Lq3fotoLqFJL0A4m8a3TdCKMP8ReoJATSriPHJmGMgqWGTnvtRBIsx1pmMpYRB6U
# EltaKW0WXeQAad0ZYGl4odx7kQUQjdc8HTQRTevQD9g3XpZZN0o9MfTPdM2eR5h6
# xaS8UEc61YJAcmD27Ir92JGGGMLBTYz4OGLx3Rj7l7S759GQ67qih9TGcE9nqSj+
# +wAHfiOjUZnSWnp7Hq4M/TIjNh0BuyBW4oRBASaikjjQ82Hih5bPTdRu1J8lYuXC
# PhN8dLwdk0NMrnnHuFDKq/sXjDeXF3Hg0AmtVvOGiB2z2OeVSPtMxl/YgniGVTbj
# CHXDqDrBAa7i6WxAo+TtUgE20iVz5uYzGqHmxTNpq6FzIRb1uvHksbjFlin79Pkw
# eF0Dj80zxAY=
# =9JAI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Mar 2024 08:04:39 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu:
chardev/char-socket: Fix TLS io channels sending too much data to the backend
tests/unit/test-util-sockets: Remove temporary file after test
hw/usb/bus.c: PCAP adding 0xA in Windows version
hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"
libqos/virtio.c: fix 'avail_event' offset in qvring_init()
libqos/virtio.c: init all elems in qvring_indirect_desc_setup()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V2: fix build error on mipsel
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZeBrwAAKCRBAov/yOSY+
33YXA/4+A5Bpe/3+mSAWZSUlluGTqUi0ILBYRMyX1RXovMx4uCRGr7PXzAf03yKS
MZzlVzTuOK69WmTm/iTdYWOxkXisC3gzxL/wm8hP4lzh4c0dHrHRsKHqq6gR3+t2
ojdZn7TefeflnNqIhxXxgxb1OETofhBNnBJ74pvqxO7XV5SWnA==
=J2Kb
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240229
V2: fix build error on mipsel
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZeBrwAAKCRBAov/yOSY+
# 33YXA/4+A5Bpe/3+mSAWZSUlluGTqUi0ILBYRMyX1RXovMx4uCRGr7PXzAf03yKS
# MZzlVzTuOK69WmTm/iTdYWOxkXisC3gzxL/wm8hP4lzh4c0dHrHRsKHqq6gR3+t2
# ojdZn7TefeflnNqIhxXxgxb1OETofhBNnBJ74pvqxO7XV5SWnA==
# =J2Kb
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 Feb 2024 11:34:24 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu:
loongarch: Change the UEFI loading mode to loongarch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since Windows text files use CRLFs for all \n, the Windows version of QEMU
inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP
files. This is due to the fact that the PCAP file is opened as TEXT instead
of BINARY.
To show an example, when using a very common protocol to USB disks, the BBB
protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10)
command will have a command block length of 10 (0xA). When this 10-byte
command (part of the 31-byte CBW) is placed into the PCAP file, the Windows
file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a
32-byte CBW.
Actual CBW:
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........%
0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
PCAP CBW
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............
0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %..............
I believe simply opening the PCAP file as BINARY instead of TEXT will fix
this issue.
Resolves: https://bugs.launchpad.net/qemu/+bug/2054889
Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net>
Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net>
[thuth: Break long line to avoid checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using "--without-default-devices", the ARM_GICV3_TCG and ARM_GIC_KVM
settings currently get disabled, though the arm virt machine is only of
very limited use in that case. This also causes the migration-test to
fail in such builds. Let's make sure that we always keep the GIC switches
enabled in the --without-default-devices builds, too.
Message-ID: <20240221110059.152665-1-thuth@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This removes a hidden use of qemu_host_page_size, hoisting
two uses of qemu_real_host_page_size to a local variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
The UEFI loading mode in loongarch is very different
from that in other architectures:loongarch's UEFI code
is in rom, while other architectures' UEFI code is in flash.
loongarch UEFI can be loaded as follows:
-machine virt,pflash=pflash0-format
-bios ./QEMU_EFI.fd
Other architectures load UEFI using the following methods:
-machine virt,pflash0=pflash0-format,pflash1=pflash1-format
loongarch's UEFI loading method makes qemu and libvirt incompatible
when using NVRAM, and the cost of loongarch's current loading method
far outweighs the benefits, so we decided to use the same UEFI loading
scheme as other architectures.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: maobibo@loongson.cn
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: zhaotianrui@loongson.cn
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
-----BEGIN PGP SIGNATURE-----
iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
=P2QF
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
# -----BEGIN PGP SIGNATURE-----
#
# iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
# HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
# =P2QF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits)
migration: Use migrate_has_error() in close_return_path_on_source()
migration: Join the return path thread before releasing to_dst_file
migration: Fix qmp_query_migrate mbps value
migration: options incompatible with cpr
migration: update cpr-reboot description
migration: stop vm for cpr
migration: notifier error checking
migration: refactor migrate_fd_connect failures
migration: per-mode notifiers
migration: MigrationNotifyFunc
migration: remove postcopy_after_devices
migration: MigrationEvent for notifiers
migration: convert to NotifierWithReturn
migration: remove error from notifier data
notify: pass error to notifier with return
migration/multifd: Drop unnecessary helper to destroy IOC
migration/multifd: Cleanup outgoing_args in state destroy
migration/multifd: Make multifd_channel_connect() return void
migration/multifd: Drop registered_yank
migration/multifd: Cleanup TLS iochannel referencing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we expand the per-vCPU data for plugins we don't want to pollute
CPUState. For now this just moves the plugin_mask (renamed to
event_mask) as the memory callbacks are accessed directly by TCG
generated code.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
This ensures we run during a cpu_exec, which allows to call start/end
exclusive from this init hook (needed for new scoreboard API introduced
later).
async work is run before any tb is translated/executed, so we can
guarantee plugin init will be called before any other hook.
The previous change made sure that any idle/resume cb call will not be
done before initializing plugin for a given vcpu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240213094009.150349-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-20-alex.bennee@linaro.org>
Now we know all instances of GDBFeature that is used in CPU so we can
traverse them to find XML. This removes the need for a CPU-specific
lookup function for dynamic XMLs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-7-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-12-alex.bennee@linaro.org>
Define MigrationNotifyFunc to improve type safety and simplify migration
notifiers.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Passing MigrationState to notifiers is unsound because they could access
unstable migration state internals or even modify the state. Instead, pass
the minimal info needed in a new MigrationEvent struct, which could be
extended in the future if needed.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Change all migration notifiers to type NotifierWithReturn, so notifiers
can return an error status in a future patch. For now, pass NULL for the
notifier error parameter, and do not check the return value.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-4-git-send-email-steven.sistare@oracle.com
[peterx: dropped unexpected update to roms/seabios-hppa]
Signed-off-by: Peter Xu <peterx@redhat.com>
Remove the error object from opaque data passed to notifiers.
Use the new error parameter passed to the notifier instead.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Pass an error object as the third parameter to "notifier with return"
notifiers, so clients no longer need to bundle an error object in the
opaque data. The new parameter is used in a later patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
All calls to ide_init_drive comes from ide_dev_initfn. Just pass down the
IDEDevice (IDEState is kinda obsolete and should be merged into IDEDevice).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a fd-bootchk property to PC machine types, so that -no-fd-bootchk
returns an error if the machine does not support booting from floppies
and checking for boot signatures therein.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Add support for UART0, in preparation of AST2700 models
-----BEGIN PGP SIGNATURE-----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=gFeX
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu into staging
aspeed queue:
* Add support for UART0, in preparation of AST2700 models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmXd2nMACgkQUaNDx8/7
# 7KErPBAAjKRmJQF9aMEgf7uqsPnJojAVumFe63NE9Gqnvy4MzgoZWfdSnLl2Ddba
# im5IfR7MYv0tzJtqCVtz7o4JwXhhDwesWALQZBM/ms48aacPSNP+7Gn141yLuCCS
# Vr8NBSIz156lSsnFGnRUArcQTDKjDp/1TLRiGcS8SDm/S4Nn++nur+T054EZgbKR
# CMWDeavgzZRb9HPepvWDwqb9qs11hq5/onCqC886dVNznxEKAVYcd0FVbSn3OfDF
# 2EPvKh+fxHlW37wcctlGPnbJK5rRvFi78yZf5utSt+mlVhyiEXjQJ6p8zBIh2w5A
# NlsmUo/UYv1F41yC/vCFRR8KJ2wO5VW7zL6UCGMV6I9hxhu/Qw+FYqWdBbAZWsOO
# GFOkFbe8zbJFXTr/W7P5upBlA7U1/B9VbRj71eu01dqT+n8OGsk8yfnWVs1SjpoD
# 89ZIhpb7lSolQmjPPxrVyfUe3/8ncTx64+CZuAZjxPh/9HA8wDXwVRPtAbIvvGaZ
# YPQ4Qmd4m6nAANAvTg2ufj19WT64XKwrQ6O3IkmGcn0BzHl08GFjru8IUp6rbduG
# m6WqulL1Ej1PrYaiw5ktpJ4Fkoy6iEFXJOWfl3oTLp2KWE5VAohyRKI00AFnHiAC
# frK+cxT4bqDtJR8QbNyJy5d3ZGZV1R6ZA0XjQ1jtb8ty2qISysw=
# =gFeX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 27 Feb 2024 12:49:55 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu:
aspeed: fix hardcode boot address 0
aspeed: introduce a new UART0 device name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our model of the bcm2835 mailbox is missing a few properties
that we need for the raspi4 kernel:
* RPI_FWREQ_GET_CLOCKS
* RPI_FWREQ_GET_THROTTLED
* RPI_FWREQ_VCHIQ_INIT
Add minimal implementations of them.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-40-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improved commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds RPi4B device tree modifications:
- disable pcie, rng200, thermal sensor and genet devices
(they're going to be re-enabled in the following commits)
- create additional memory region in device tree
if RAM amount exceeds VC base address.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-12-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-11-sergey.kambalin@auriga.com
[PMM: Change name to 'raspi4b', not 'raspi4b-2g']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pre-setup for raspberry pi 4 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-4-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pre setup for BCM2838 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-2-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the reset of the sysbus (and thus all devices and buses anywhere
on the qbus tree) from qemu_register_reset() to qemu_register_resettable().
This is a behaviour change: because qemu_register_resettable() is
aware of three-phase reset, this now means that:
* 'enter' phase reset methods of devices and buses are called
before any legacy reset callbacks registered with qemu_register_reset()
* 'exit' phase reset methods of devices and buses are called
after any legacy qemu_register_reset() callbacks
Put another way, a qemu_register_reset() callback is now correctly
ordered in the 'hold' phase along with any other 'hold' phase methods.
The motivation for doing this is that we will now be able to resolve
some reset-ordering issues using the three-phase mechanism, because
the 'exit' phase is always after the 'hold' phase, even when the
'hold' phase function was registered with qemu_register_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-10-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reimplement qemu_register_reset() via qemu_register_resettable().
We define a new LegacyReset object which implements Resettable and
defines its reset hold phase method to call a QEMUResetHandler
function. When qemu_register_reset() is called, we create a new
LegacyReset object and add it to the simulation_reset
ResettableContainer. When qemu_unregister_reset() is called, we find
the LegacyReset object in the container and remove it.
This implementation of qemu_unregister_reset() means we'll end up
scanning the ResetContainer's list of child objects twice, once
to find the LegacyReset object, and once in g_ptr_array_remove().
In theory we could avoid this by having the ResettableContainer
interface include a resettable_container_remove_with_equal_func()
that took a callback method so that we could use
g_ptr_array_find_with_equal_func() and g_ptr_array_remove_index().
But we don't expect qemu_unregister_reset() to be called frequently
or in hot paths, and we expect the simulation_reset container to
usually not have many children.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-9-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement new functions qemu_register_resettable() and
qemu_unregister_resettable(). These are intended to be
three-phase-reset aware equivalents of the old qemu_register_reset()
and qemu_unregister_reset(). Instead of passing in a function
pointer and opaque, you register any QOM object that implements the
Resettable interface.
The implementation is simple: we have a single global instance of a
ResettableContainer, which we reset in qemu_devices_reset(), and
the Resettable objects passed to qemu_register_resettable() are
added to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-8-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement a ResetContainer. This is a subclass of Object, and it
implements the Resettable interface. The container holds a list of
arbitrary other objects which implement Resettable, and when the
container is reset, all the objects it contains are also reset.
This will allow us to have a 3-phase-reset equivalent of the old
qemu_register_reset() API: we will have a single "simulation reset"
top level ResetContainer, and objects in it are the equivalent of the
old QEMUResetHandler functions.
The qemu_register_reset() API manages its list of callbacks using a
QTAILQ, but here we use a GPtrArray for our list of Resettable
children: we expect the "remove" operation (which will need to do an
iteration through the list) to be fairly uncommon, and we get simpler
code with fewer memory allocations.
Since there is currently no listed owner in MAINTAINERS for the
existing reset-related source files, create a new section for
them, and add these new files there also.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-7-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
This property allows users to change flash model on command line as
below.
ex: "-M xlnx-versal-virt,ospi-flash=mt35xu02gbba"
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Message-id: 20240220091721.82954-3-sai.pavan.boddu@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Micro 2Gb OSPI flash part with sfdp data.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20240220091721.82954-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PL031 allows you to read RTCLR, which is meant to give you the last
value written. PL031State has an lr field which is used when reading
from RTCLR, and is present in the VM migration state, but we never
actually update it, so it always reads as its initial 0 value.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240222000341.1562443-1-jrtc27@jrtc27.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OSPI DMA reads flash data through the OSPI linear address space (the
iomem_dac region), because of this the reentrancy guard introduced in
commit a2e1753b ("memory: prevent dma-reentracy issues") is disabled for
the memory region.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Message-id: 20240219105637.65052-1-sai.pavan.boddu@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A few watchdog devices use qemu_system_reset_request(). This is not ideal since
behaviour of watchdog-expiry can't be changed by QMP using `watchdog_action`.
As stated in BiteSizedTasks wiki page, instead of using qemu_system_reset_request()
to reset when a watchdog timer expires, let watchdog_perform_action() decide
what to do.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2124
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Message-id: 20240216192612.30838-5-atp.exp@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A few watchdog devices use qemu_system_reset_request(). This is not ideal since
behaviour of watchdog-expiry can't be changed by QMP using `watchdog_action`.
As stated in BiteSizedTasks wiki page, instead of using qemu_system_reset_request()
to reset when a watchdog timer expires, let watchdog_perform_action() decide
what to do.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2124
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Message-id: 20240216192612.30838-4-atp.exp@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no point in checking do we have PCIe if first thing after check
is adding PCIe card without checking.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240215153311.186772-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the previous design of ASPEED SOCs QEMU model, it set the boot
address at "0" which was the hardcode setting for ast10x0, ast2600,
ast2500 and ast2400.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL and initialize DRAM and copy u-boot image
from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700 and the boot
address is "0x4 00000000".
Fixed hardcode boot address "0" for future models using
a different mapping address.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Aspeed datasheet refers to the UART controllers
as UART1 - UART13 for the ast10x0, ast2600, ast2500
and ast2400 SoCs and the Aspeed ast2700 introduces an UART0
and the UART controllers as UART0 - UART12.
To keep the naming in the QEMU models
in sync with the datasheet, let's introduce a new UART0 device name
and do the required adjustements.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - Kept original assert() in aspeed_soc_uart_set_chr()
- Fixed 'i' range in connect_serial_hds_to_uarts() loop ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rename "internal.h" as "ide-internal.h", and include
it via its relative local path, instead of absolute
to the project root path.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240226080632.9596-4-philmd@linaro.org>
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and
replace them with newly added public header to allow moving internal.h
into hw/ide to really stop exposing it.
Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use ahci_ide_create_devs() instead of open-coding it.
Not accessing AHCIDevice internals anymore allows to
remove "hw/ide/ahci_internal.h" (which isn't really a
public header).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240226080632.9596-2-philmd@linaro.org>
Both the piix and the q35 machines introduce an rtc_state variable and defer the
initialization of the X86MachineState::rtc attribute to pc_cmos_init(). Resolve
this complication which makes pc_cmos_init() do what it says on the tin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PCMachineClass introduces the attribute into the class hierarchy and sets it to
true. There is no sub class overriding the attribute. Commit 30d2a17b46
"hw/i386: Remove the deprecated machines 0.12 up to 0.15" removed the last
overrides of this attribute. The attribute is now unneeded and can be removed.
Fixes: 30d2a17b46 "hw/i386: Remove the deprecated machines 0.12 up to 0.15"
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no advantage in having these local variables which 1/ needlessly have
different identifiers in both machines and 2/ which are redundant to pcms->bus
which is almost as short.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute is of type PCIBus; reflect that in the name. It will also make the
next change more intuitive.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"hw/acpi/acpi.h" is implicitly included. Include it
explicitly to avoid the following error when refactoring
headers:
hw/i386/pc_q35.c:209:43: error: use of undeclared identifier 'ACPI_PM_PROP_ACPI_PCIHP_BRIDGE'
ACPI_PM_PROP_ACPI_PCIHP_BRIDGE,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240226090600.31952-3-philmd@linaro.org>
Prefer the QDev API over the low level QOM one.
No logical change intended.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240215142035.73331-4-philmd@linaro.org>
Rather than taking a QOM name which has to be resolved, let's pass the parent
directly as pointer. This simplifies the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
numcntl is one byte and so is max_vfs. Using cpu_to_le16 on big endian
hosts results in numcntl being set to 0.
Fix by dropping the endian conversion.
Fixes: 99f48ae7ae ("hw/nvme: Add support for Secondary Controller List")
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-ID: <20240222-fix-sriov-numcntl-v1-1-d60bea5e72d0@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Because USB_EHCI_SYSBUS selects USB_EHCI, there is no need to include
hcd-ehci.c explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-11-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split the sysbus version to a separate file so that it is not
included in PCI-only machines, and adjust Kconfig for machines
that do need sysbus-ohci. The copyrights are based on the
time and employer of balrog and Paul Brook's contributions.
While adjusting the SM501 dependency, move it to the right place
instead of keeping it in the R4D machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-10-pbonzini@redhat.com>
[PMD: Rename some functions using 'ohci_sysbus_' prefix]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Inline the sole remaining use, which is for the -usbdevice command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-9-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With --without-default-devices it is possible to build a binary that
does not include any USB host controller and therefore that does not
include the code guarded by CONFIG_USB. While the simpler creation
functions such as usb_create_simple can be inlined, this is not true
of usb_bus_find(). Remove it, replacing it with a search of the single
USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-8-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With --without-default-devices it should not be required to have
devices in the binary that are removed by -nodefaults. It should be
therefore possible to build a binary that does not include any USB
host controller or any of the code guarded by CONFIG_USB. While the
simpler creation functions such as usb_create_simple can be inlined,
this is not true of usb_bus_find(). Remove it, replacing it with a
search of the single USB bus on the machine.
With this change, it is possible to change "select USB_OHCI_PCI" into
an "imply" directive.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-7-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With --without-default-devices it is possible to build a binary that
does not include any USB host controller and therefore that does not
include the code guarded by CONFIG_USB. While the simpler creation
functions such as usb_create_simple can be inlined, this is not true
of usb_bus_find(). Remove it, replacing it with a search of the single
USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-6-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Once the Kconfig for hw/mips is cleaned up, it will be possible to build a
binary that does not include any USB host controller and therefore that
does not include the code guarded by CONFIG_USB. While the simpler
creation functions such as usb_create_simple can be inlined, this is not
true of usb_bus_find(). Remove it, replacing it with a search of the
single USB bus created by loongson3_virt_devices_init().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240223124406.234509-5-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
usb_bus_find() is always used with argument -1; it can be replaced with
a search of the single USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223124406.234509-4-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
usb_bus_find() is always used with argument -1; it can be replaced with
a search of the single USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223124406.234509-3-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
object_resolve_type_unambiguous provides a useful functionality, that
is currently emulated for example by usb_bus_find(). Move it to core
code and add error reporting for increased generality.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-2-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The nubus-virtio-mmio device is a Nubus card that contains a set of 32 virtio-mmio
devices and a goldfish PIC similar to the m68k virt machine that can be plugged
into the m68k q800 machine.
There are currently a number of drivers under development that can be used in
conjunction with this device to provide accelerated and/or additional hypervisor
services to 68k Classic MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Declaration ROM binary images can be any arbitrary size, however if a host ROM
memory region is not aligned to qemu_target_page_size() then we fail the
"assert(!(iotlb & ~TARGET_PAGE_MASK))" check in tlb_set_page_full().
Ensure that the host ROM memory region is aligned to qemu_target_page_size()
and adjust the offset at which the Declaration ROM image is loaded, since Nubus
ROM images are unusual in that they are aligned to the end of the slot address
space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sysbus_address_space() is not more used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240216153517.49422-7-philmd@linaro.org>
sysbus_address_space(...) is a simple wrapper to
get_system_memory(). Use it in place, since KVM
VAPIC doesn't distinct address spaces.
Rename the 'as' variable as 'mr' since it is a
MemoryRegion type, not an AddressSpace one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240216153517.49422-6-philmd@linaro.org>
Add the Exynos4210fimdState::'framebuffer-memory' property. Have
the board set it. We don't need to call sysbus_address_space()
anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240226173805.289-5-philmd@linaro.org>
We want to set another qdev property (a link) for the FIMD
device, we can not use sysbus_create_varargs() which only
passes sysbus base address and IRQs as arguments. Inline
it so we can set the link property in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240216153517.49422-4-philmd@linaro.org>
Add the PL110::'framebuffer-memory' property. Have the different
ARM boards set it. We don't need to call sysbus_address_space()
anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240226173805.289-3-philmd@linaro.org>
We want to set another qdev property (a link) for the pl110
and pl111 devices, we can not use sysbus_create_simple() which
only passes sysbus base address and IRQs as arguments. Inline
it so we can set the link property in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240226173805.289-2-philmd@linaro.org>
One of the functions of the ChipTOD is to transfer TOD to the Core
(aka PC - Pervasive Core) timebase facility.
The ChipTOD can be programmed with a target address to send the TOD
value to. The hardware implementation seems to perform this by
sending the TOD value to a SCOM address.
This implementation grabs the core directly and manipulates the
timebase facility state in the core. This is a hack, but it works
enough for now. A better implementation would implement the transfer
to the PnvCore xscom register and drive the timebase state machine
from there.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Wire the ChipTOD model to powernv9 and powernv10 machines.
Suggested-by-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ChipTOD (for Time-Of-Day) is a chip pervasive facility in IBM POWER
(powernv) processors that keeps a time of day clock.
In particular for this model are facilities that initialise and start
the time of day clock, and that synchronise that clock to cores on the
chip, and to other chips. In this way, all cores on all chips can
synchronise timebase (TB).
This model implements functionality sufficient to run the skiboot
chiptod synchronisation procedure (with the following core timebase
state machine implementation). It does not modify the TB in the cores
where the real hardware would, because the QEMU ppc timebase
implementation is always synchronised acros all cores.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This part of the patchset connects the nest1 chiplet model to p10 chip.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The N1 chiplet handle the high speed i/o traffic over PCIe and others.
The N1 chiplet consists of PowerBus Fabric controller,
nest Memory Management Unit, chiplet control unit and more.
This commit creates a N1 chiplet model and initialize and realize the
pervasive chiplet model where chiplet control registers are implemented.
This commit also implement the read/write method for the powerbus scom
registers
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
A POWER10 chip is divided into logical units called chiplets. Chiplets
are broadly divided into "core chiplets" (with the processor cores) and
"nest chiplets" (with everything else). Each chiplet has an attachment
to the pervasive bus (PIB) and with chiplet-specific registers. All nest
chiplets have a common basic set of registers and This model will provide
the registers functionality for common registers of nest chiplet (Pervasive
Chiplet, PB Chiplet, PCI Chiplets, MC Chiplet, PAU Chiplets)
This commit implement the read/write functions of chiplet control registers.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For powernv10-rainier, the Power Hypervisor code expects to see a
pca9554 device connected to the 3rd PNV I2C engine on port 1 at I2C
address 0x25 (or left-justified address of 0x4A). This is used by
the hypervisor code to detect if a "Cable Card" is present.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Specs are available here:
https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
This is a simple model supporting the basic registers for GPIO
mode. The device also supports an interrupt output line but the
model does not yet support this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The QEMU I2C buses and devices use the resettable
interface for resetting while the PNV I2C controller
and parent buses and devices have not yet transitioned
to this new interface and use the old reset strategy.
This was preventing the I2C buses and devices wired
to the PNV I2C controller from being reset.
The short term fix for this is to have the PNV I2C
Controller's reset function explicitly call the resettable
interface function, bus_cold_reset(), on all child
I2C buses.
The long term fix should be to transition all PNV parent
devices and buses to use the resettable interface so that
all child buses and devices are automatically reset.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For power10-rainier, a pca9552 device is used for PCIe slot hotplug
power control by the Power Hypervisor code. The code expects that
some time after it enables power to a PCIe slot by asserting one of
the pca9552 GPIO pins 0-4, it should see a "power good" signal asserted
on one of pca9552 GPIO pins 5-9.
To simulate this behavior, we simply connect the GPIO outputs for
pins 0-4 to the GPIO inputs for pins 5-9.
Each PCIe slot is assigned 3 GPIO pins on the pca9552 device, for
control of up to 5 PCIe slots. The per-slot signal names are:
SLOTx_EN.......PHYP uses this as an output to enable
slot power. We connect this to the
SLOTx_PG pin to simulate a PGOOD signal.
SLOTx_PG.......PHYP uses this as in input to detect
PGOOD for the slot. For our purposes
we just connect this to the SLOTx_EN
output.
SLOTx_Control..PHYP uses this as an output to prevent
a race condition in the real hotplug
circuitry, but we can ignore this output
for simulation.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The Power Hypervisor code expects to see a pca9552 device connected
to the 3rd PNV I2C engine on port 1 at I2C address 0x63 (or left-
justified address of 0xC6). This is used by hypervisor code to
control PCIe slot power during hotplug events.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a new powernv machine type, powernv10-rainier, that
will contain rainier-specific devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Allow external devices to drive pca9552 input pins by adding
input GPIO's to the model. This allows a device to connect
its output GPIO's to the pca9552 input GPIO's.
In order for an external device to set the state of a pca9552
pin, the pin must first be configured for high impedance (LED
is off). If the pca9552 pin is configured to drive the pin low
(LED is on), then external input will be ignored.
Here is a table describing the logical state of a pca9552 pin
given the state being driven by the pca9552 and an external device:
PCA9552
Configured
State
| Hi-Z | Low |
------+------+-----+
External Hi-Z | Hi | Low |
Device ------+------+-----+
State Low | Low | Low |
------+------+-----+
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 is the latest IBM Power machine. Although it is not offered in
"OPAL mode" (i.e., powernv configuration), so there is a case that it
should remain at powernv9, most of the development work is going into
powernv10 at the moment.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
pseries machines before version 2.11 have undergone many changes to
correct issues, mostly regarding migration compatibility. This is
obfuscating the code uselessly and makes maintenance more difficult.
Remove them and only keep the last version of the 2.x series, 2.12,
still in use by old distros.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Initialize the machine specific max_cpus limit as per the maximum range
of CPU IPIs available. Keeping between 4096 to 8192 will throw IRQ not
free error due to XIVE/XICS limitation and keeping beyond 8192 will hit
assert in tcg_region_init or spapr_xive_claim_irq.
Logs:
Without patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: IRQ 4096 is not free
[root@host build]#
On LPAR:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
**
ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Bail out! ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Aborted (core dumped)
[root@host build]#
On x86:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
qemu-system-ppc64: ../hw/intc/spapr_xive.c:596: spapr_xive_claim_irq:
Assertion `lisn < xive->nr_irqs' failed.
Aborted (core dumped)
[root@host build]#
With patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: Invalid SMP CPUs 4097. The max CPUs supported by
machine 'pseries-8.2' is 4096
[root@host build]#
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
To reduce the use of the term 'softmmu', rename spapr_softmmu.c
to spapr_vhyp_mmu.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: change name]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since 'softmmu' is quite a loaded term in QEMU, rename the vhyp MMU
facilities to use the vhyp_mmu_ prefix rather than softmmu_.
vhyp_mmu_ is chosen because the code that manipulates the hash table
via guest software hypercalls is QEMU's implementation of the PAPR
hypervisor interface, called vhyp.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Pick a different name, explain it in changelog.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Check tcg_enabled() before calling softmmu_resize_hpt_prepare()
and softmmu_resize_hpt_commit() to allow the compiler to elide
their calls. The stubs are then unnecessary, remove them.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 9fdf0c2995 ("Start implementing pSeries logical partition
machine") added hw/ppc/spapr_hcall.c, then commit 962104f044
("hw/ppc: moved hcalls that depend on softmmu") extracted the
system code to hw/ppc/spapr_softmmu.c. Take the license and
copyrights from the original spapr_hcall.c at commit 9fdf0c2995.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Update file description.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
-----BEGIN PGP SIGNATURE-----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=+h2O
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240222' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXXQ1IACgkQ4+MsLN6t
# wN4e2xAAig55EJh/JwpdGx55rFUab3Ay22jgXrExmBir8hzhyzssY+RUj2ALRa5e
# T26kxCEqiuT549FtWm/ci6kVax0QD6bqz/6/j451XB9469Z/3BDOV5rhsqF6zlr5
# BMbyC8PKnMUluG8v1ZuRjC3m2lK3ZvkVnZtj7SZUR50ssEnR32fVIziN14/OYkts
# 2B24sLrnLBfvyatMRsuFqGWrcbtMdnwNpjenGfDPOTF33W1sxTQ8GSvx1RV32l69
# Yr/iCVoCl+rGxbLLP1TwqtOwzk32p8RsbIt6rWMqVMv/p5F6ezFeiOk7VHnnEJRH
# e7TPxt4XeLGPARMQLT3gQh0MGIIodanSHePRBkczuNmKYTJrz+5jMu2Qg4MmMUE/
# TV0fKgdjh/edhAOHzJgZqLmNV71icl8WBjfsw2qT4ZwgJzWq7YM2/XZKkeWhk2nQ
# whLxfgiU4PNJ6vHhebJNjOovCYQTK2FbXR+PvVn5FEbH4CuFr8mqkYc+vNYM9dLA
# b7uMk1H8kcb5+kqfPPU2lVd1wO7uqhxYOYU2O9nYq8aw7ioLoLeEdj2IicLtrA/H
# GMtyA5cYeabeRzSXF30tM2AR1uQ/e4Z7oNxW6z3GVK1NrQtKilqPgMKut8uWYvva
# crJLpRQhGiY3sDrIkkCcAHzv256dZaJNLR1KPViaHOyVPZV+x2s=
# =+h2O
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 Feb 2024 12:51:30 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20240222' of https://github.com/philmd/qemu: (32 commits)
hw/sparc/leon3: Fix wrong usage of DO_UPCAST macro
hw/ide: Stop exposing internal.h to non-IDE files
hw/ide: Remove the include/hw/ide.h legacy file
hw/ide: Move IDE bus related definitions to a new header ide-bus.h
hw/ide: Move IDE device related definitions to ide-dev.h
hw/ide: Move IDE DMA related definitions to a separate header ide-dma.h
hw/ide: Split qdev.c into ide-bus.c and ide-dev.c
hw/ide: Add the possibility to disable the CompactFlash device in the build
hw/acpi/ich9_tco: Include missing 'migration/vmstate.h' header
hw/acpi/cpu: Use CPUState typedef
hw/acpi: Include missing 'qapi/qapi-types-acpi.h' generated header
hw/isa/meson.build: Sort alphabetically
hw/i386/pc_q35: Populate interrupt handlers before realizing LPC PCI function
hw/i386/pc_sysfw: Use qdev_is_realized() instead of QOM API
hw/i386/pc_sysfw: Inline pc_system_flash_create() and remove it
hw/i386/pc: Confine system flash handling to pc_sysfw
hw/i386/pc: Defer smbios_set_defaults() to machine_done
hw/i386/pc: Merge pc_guest_info_init() into pc_machine_initfn()
hw/i386/x86: Turn apic_xrupt_override into class attribute
hw/i386/pc: Do pc_cmos_init_late() from pc_machine_done()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/hw/i386/pc.h
leon3.c currently fails to compile with some compilers when the -Wvla
option has been enabled:
../hw/sparc/leon3.c: In function ‘leon3_cpu_reset’:
../hw/sparc/leon3.c:153:5: error: ISO C90 forbids variable length array
‘offset_must_be_zero’ [-Werror=vla]
153 | ResetData *s = (ResetData *)DO_UPCAST(ResetData, info[id], info);
| ^~~~~~~~~
cc1: all warnings being treated as errors
Looking at this code, the DO_UPCAST macro is indeed used in a wrong way
here: DO_UPCAST is supposed to check that the second parameter is the
first entry of the struct that the first parameter indicates, but since
we use and index into the info[] array, this of course cannot work.
The intention here was likely rather to use the container_of() macro
instead, so switch the code accordingly.
Fixes: d65aba8286 ("hw/sparc/leon3: implement multiprocessor")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240221180751.190489-1-thuth@redhat.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
include/hw/ide/internal.h is currently included by include/hw/ide/pci.h
and thus exposed to a lot of files that are not part of the IDE subsystem.
Stop including internal.h there and use the appropriate new headers
ide-bus.h and ide-dma.h instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-8-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Untangle internal.h by moving public IDE device related
definitions to ide-dev.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-5-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
qdev.c is a mixture between IDE bus specific functions and IDE device
functions. Let's split it up to make it more obvious which part is
related to bus handling and which part is related to device handling.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-3-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For distros like downstream RHEL, it would be helpful to allow to disable
the CompactFlash device. For making this possible, we need a separate
Kconfig switch for this device, and the code should reside in a separate
file. Let's also introduce a new header ide-dev.h which can be used to
collect definitions related to IDE devices.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: fbd758008f "hw/isa: extract FDC37M81X to a separate file"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240218131701.91132-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The interrupt handlers need to be populated before the device is realized since
internal devices such as the RTC are wired during realize(). If the interrupt
handlers aren't populated, devices such as the RTC will be wired with a NULL
interrupt handler, i.e. MC146818RtcState::irq is NULL.
Fixes: fc11ca08bc "hw/i386/q35: Realize LPC PCI function before accessing it"
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240217104644.19755-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240216110313.17039-3-philmd@linaro.org>
pc_system_flash_create() checked for pcmc->pci_enabled which is redundant since
its caller already checked it. The method can be turned into just two lines, so
inline and remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than distributing PC system flash handling across three files, let's
confine it to one. Now, pc_system_firmware_init() creates, configures and cleans
up the system flash which makes the code easier to understand. It also avoids
the extra call to pc_system_flash_cleanup_unused() in the Xen case.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Handling most of smbios data generation in the machine_done notifier is similar
to how the ARM virt machine handles it which also calls smbios_set_defaults()
there. The result is that all pc machines are freed from explicitly worrying
about smbios setup.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Resolves redundant code in the piix and q35 machines.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute isn't user-changeable and only true for pc-based machines. Turn it
into a class attribute which allows for inlining pc_guest_info_init() into
pc_machine_initfn().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the i386 PC machine, we want to run the pc_cmos_init_late()
function only once the IDE and floppy drive devices have been set up.
We currently do this using qemu_register_reset(), and then have the
function call qemu_unregister_reset() on itself, so it runs exactly
once.
This was an expedient way to do it back in 2010 when we first added
this (in commit c0897e0cb9), but now we have a more obvious point
to do "machine initialization that has to happen after generic device
init": the machine-init-done hook.
Do the pc_cmos_init_late() work from our existing PC machine init
done hook function, so we can drop the use of qemu_register_reset()
and qemu_unregister_reset().
Because the pointers to the devices we need (the IDE buses and the
RTC) are now all in the machine state, we don't need the
pc_cmos_init_late_arg struct and can just pass the PCMachineState
pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220160622.114437-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add the two IDE bus BusState pointers to the set we keep in PCMachineState.
This allows us to avoid passing them to pc_cmos_init(), and also will
allow a refactoring of how we call pc_cmos_init_late().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Do not zero-init pcms->idebus[] again]
Message-ID: <20240220160622.114437-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both invocations are the same and either one is always executed. Avoid this
redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The current logging doesn't tell us which specific smbus device is an
error state.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240202204847.2062798-3-komlodi@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240216110313.17039-6-philmd@linaro.org>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240216110313.17039-4-philmd@linaro.org>
ppc440_pcix.c is moved from the target specific ppc_ss[] meson
source set to pci_ss[] which is common to all targets: the
object is built once.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240215105017.57748-5-philmd@linaro.org>
ppc4xx_pci.c is moved from the target specific ppc_ss[] meson
source set to pci_ss[] which is common to all targets: the
object is built once.
Declare PPC4XX_PCI selector in pci-host/Kconfig.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240215105017.57748-4-philmd@linaro.org>
sysbus_add_io(...) is a simple wrapper to
memory_region_add_subregion(get_system_io(), ...).
It is used in 3 places; inline it directly.
Rationale: we want to move to an explicit I/O bus,
rather that an implicit one. Besides in heterogeneous
setup we can have more than one I/O bus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240216150441.45681-1-philmd@linaro.org>
[PMD: Include missing "exec/address-spaces.h" header]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the named GPIO lines are a "public" interface to the device,
we can directly call qdev_connect_gpio_out_named(), making it
consistent with how the other A20 input source (port92) is wired.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When running "configure" with "--without-default-devices", building
of qemu-system-hppa currently fails with:
/usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in function `machine_HP_common_init_tail':
hw/hppa/machine.c:399: undefined reference to `usb_bus_find'
/usr/bin/ld: hw/hppa/machine.c:399: undefined reference to `usb_create_simple'
/usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find'
/usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_create_simple'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
make: *** [Makefile:162: run-ninja] Error 1
And after fixing this, the qemu-system-hppa binary refuses to run
due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add
the right config switches to fix these problems.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
X86 CPU hotplug isn't specific to PC machines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cpu_hotplug.c only needs the PCI *device* definitions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
TYPE_PORT92 inherits TYPE_ISA_DEVICE, so need to include
"hw/isa/isa.h" to get its declarations (currently we
indirectly include this header via "hw/i386/pc.h").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since pc_madt_cpu_entry() is only used by:
- hw/i386/acpi-build.c // single call
- hw/i386/acpi-common.c // definition
there is no need to expose it outside of hw/i386/.
Declare it in "acpi-common.h".
acpi-build.c doesn't need "hw/i386/pc.h" anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c461f3e382 ("hw/acpi/acpi_dev_interface: Remove now unused
madt_cpu virtual method") removed the need for "hw/i386/pc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HPET_INTCAP is specific to TYPE_HPET, so define it there.
hpet.c doesn't need to include "hw/i386/pc.h" anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename NB_PORTS as EHCI_PORTS to avoid definition clash
with UHCI equivalent:
hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
hw/usb/hcd-uhci.h:38:9: note: previous definition is here
#define NB_PORTS 2
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename NB_PORTS as UHCI_PORTS to avoid definition clash
with EHCI equivalent:
hw/usb/hcd-uhci.h:38:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
#define NB_PORTS 2
^
hw/usb/hcd-ehci.h:40:9: note: previous definition is here
#define NB_PORTS 6 /* Max. Number of downstream ports */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We are going to modify these lines, fix their style
in order to avoid checkpatch.pl warning.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow boards to use the device creation functions even if USB itself
is not available; of course the functions will fail inexorably, but
this can be okay if the calls are conditional on the existence of
some USB host controller device. This is for example the case for
hw/mips/loongson3_virt.c.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calls to is_enabled are bounded to indices that actually exist in
the SuperIO device. Therefore, the is_enabled functions in
smc37c669 are not doing anything and they can be removed.
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that the value is valid; it can only be zero or one.
And never create a floppy disk controller if it is zero.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no use of ptimer functions in mips_cps.c or any other related
code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc_machine_kvm_type() was introduced by commit e21be724ea ("i386/xen:
add pc_machine_kvm_type to initialize XEN_EMULATE mode") to do Xen
specific initialization by utilizing kvm_type method.
commit eeedfe6c63 ("hw/xen: Simplify emulated Xen platform init")
moves the Xen specific initialization to pc_basic_device_init().
There is no need to keep the PC specific kvm_type() implementation
anymore. So we'll fallback to kvm_arch_get_default_type(), which
simply returns 0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231007065819.27498-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to duplicate AHCIState::ports, directly access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-9-philmd@linaro.org>
Explicitly set AHCIState::ports before calling ahci_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-8-philmd@linaro.org>
AHCIState::ports should be unsigned. Besides, we never
check it for negative value. It is unlikely it was ever
used with more than INT32_MAX ports, so it is safe to
convert it to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-7-philmd@linaro.org>
Since ahci_ide_create_devs() is not PCI specific, pass
it an AHCIState argument instead of PCIDevice.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-6-philmd@linaro.org>
Introduce the 'ich9' variable and inline ahci_get_num_ports().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-5-philmd@linaro.org>
We want to access AHCIPCIState::ahci field. In order to keep
the code simple (avoiding &ahci->ahci), rename the current
'ahci' variable as 'pdev'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-4-philmd@linaro.org>
In order to be able to QOM-embed a structure, we need
its full definition. Move it from "ahci_internal.h"
to the new "hw/ide/ahci-pci.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-3-philmd@linaro.org>
QDev API provides the DEVICE() macro to access the
'qdev' parent field of the PCIDevice structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-2-philmd@linaro.org>
We can not create the Q35 machine without PCI, so simplify
pc_q35_init() removing pointless checks.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213041952.58840-1-philmd@linaro.org>
Inline cpu_create() in order to call qdev_init_gpio_in_named()
before the CPU is realized.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240215144623.76233-4-philmd@linaro.org>
By passing a DeviceState context to a QDev IRQ handler,
we can simplify and use qdev_init_gpio_in_named() instead
of qdev_init_gpio_in_named_with_opaque().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240215144623.76233-3-philmd@linaro.org>
By passing a DeviceState context to a QDev IRQ handler,
we can simplify and use qdev_init_gpio_in_named() instead
of qdev_init_gpio_in_named_with_opaque().
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240215144623.76233-2-philmd@linaro.org>
Now that SMP is possible, the asr17 must be checked in the little boot
code or the secondary CPU will reinitialize the Timer and the Uart.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-9-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This allows to register more than one CPU on the leon3_generic machine.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20240131085047.18458-8-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to the doc (see §4.2.15 in [1]), the reset operation should
not impact %SP.
[1] https://gaisler.com/doc/gr712rc-usermanual.pdf
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-7-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now there is an ncpus property, use it in order to deliver the IRQ to
multiple CPU.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-5-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This implements the multiprocessor status register in grlib-irqmp and
bind it to a start signal, which will be later wired in leon3-generic
to start a cpu.
The EIRQ and BA bits are not implemented.
Based on https://gaisler.com/doc/gr712rc-usermanual.pdf, §8.3.5.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-4-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This adds a "ncpus" property to the "grlib-irqmp" device to be used
later, this required a little refactoring of how we initialize the
device (ie: use realize instead of init).
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-3-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out the headers for each peripherals and move them in their
right hardware directory.
Update Copyright and add SPDX-License-Identifier at the same time.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-2-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Directly use the void pointer argument returned
by memory_region_get_ram_ptr().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240215132824.67363-3-philmd@linaro.org>
'CPUSPARCState *env' argument is unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240215132824.67363-2-philmd@linaro.org>
Since commit b04d989054 ("SPARC: Emulation of Leon3") the
main_cpu_reset() handler sets both pc/npc when the CPU is
reset, after the machine is realized. It is pointless to
set it in leon3_generic_hw_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Message-Id: <20240130113102.6732-3-philmd@linaro.org>
Inline cpu_create() in order to call
qdev_init_gpio_in_named_with_opaque()
before the CPU is realized.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Damien Hedde <dhedde@kalrayinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-13-philmd@linaro.org>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-9-philmd@linaro.org>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-8-philmd@linaro.org>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-7-philmd@linaro.org>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-6-philmd@linaro.org>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Damien Hedde <dhedde@kalrayinc.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-5-philmd@linaro.org>
Instead of filling an array of all the possible IRQs, only call
qdev_get_gpio_in() when an IRQ is used. Remove the array from
RX62NState. Doing so we avoid calling qdev_get_gpio_in() on an
unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-4-philmd@linaro.org>
"qemu/units.h" is not used in the "hw/rx/rx62n.h"
header, include it in the source where it is.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-3-philmd@linaro.org>
isa-superio.c currently defines a SuperIO chip that is not used
by any other user of the file. Extract the chip to a separate file.
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240213155005.109954-7-pbonzini@redhat.com>
[PMD: Update MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Right now all subclasses of TYPE_ISA_SUPERIO have to specify an instance_size,
because the ISASuperIODevice struct adds fields to ISADevice but the type does
not include the increased instance size. Failure to do so results in an access
past the bounds of struct ISADevice as soon as isa_superio_realize is called.
Fix this by specifying the instance_size already in the superclass.
Fixes: 4c3119a6e3 ("hw/isa/superio: Factor out the parallel code from pc87312.c")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240213155005.109954-6-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ISA_SUPERIO does not provide an ISA bus, so it should not select the symbol:
instead it requires one. Among its users, VT82C686 is the only one that
is a PCI-ISA bridge and does not already select ISA_BUS.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240213155005.109954-5-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The board doesn't have a working ISA bus, only some I/O space.
Selecting ISA_BUS and including hw/isa/isa.h is not necessary.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20230109204124.102592-3-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240213155005.109954-4-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
All users of ISA_SUPERIO include a floppy disk controller, serial port
and parallel port via the automatic creation mechanism of isa-superio.c.
Select the symbol and remove it from the dependents.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240213155005.109954-3-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This field is not set. Remove it along with the dead
code it was guarding.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-7-philmd@linaro.org>
Since previous commit the MIPSITUState::cpu0 field is not
used anymore. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-6-philmd@linaro.org>
This field is never set, so remove the unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-5-philmd@linaro.org>
Previous commits removed the MT*C0(SAAR) helpers which
were using CPUMIPSState::itu, we can now remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-4-philmd@linaro.org>
Previous commit removed the MT*C0(SAAR) helpers which
were the only calls to itc_reconfigure() out of hw/,
we can reduce its scope and declare it statically.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-3-philmd@linaro.org>
There is no use of ptimer functions in mips_cps.c or any other related
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129115811.1039965-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suppress the deprecation warning when we're running under qtest,
to avoid "make check" including warning messages in its output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240206154151.155620-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add the remaining devices (or unimplemented-device stubs) for
this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the
QSPI write-config block, and ethernet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-13-peter.maydell@linaro.org
Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536
board. These are all simple devices that just need to be created and
wired up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-12-peter.maydell@linaro.org
This board has a lot of UARTs: there is one UART per CPU in the
per-CPU peripheral part of the address map, whose interrupts are
connected as per-CPU interrupt lines. Then there are 4 UARTs in the
normal part of the peripheral space, whose interrupts are shared
peripheral interrupts.
Connect and wire them all up; this involves some OR gates where
multiple overflow interrupts are wired into one GIC input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-11-peter.maydell@linaro.org
Create the CPUs, the GIC, and the per-CPU RAM block for
the mps3-an536 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240206132931.38376-10-peter.maydell@linaro.org
The AN536 is another FPGA image for the MPS3 development board. Unlike
the existing FPGA images we already model, this board uses a Cortex-R
family CPU, and it does not use any equivalent to the M-profile
"Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c.
It's therefore more convenient for us to model it as a completely
separate C file.
This commit adds the basic skeleton of the board model, and the
code to create all the RAM and ROM. We assume that we're probably
going to want to add more images in future, so use the same
base class/subclass setup that mps2-tz.c uses, even though at
the moment there's only a single subclass.
Following commits will add the CPUs and the peripherals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
The MPS SCC device has a lot of different flavours for the various
different MPS FPGA images, which look mostly similar but have
differences in how particular registers are handled. Currently we
deal with this with a lot of open-coded checks on scc_partno(), but
as we add more board types this is getting a bit hard to read.
Factor out the conditions into some functions which we can
give more descriptive names to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-7-peter.maydell@linaro.org
We currently guard the CFG3 register read with
(scc_partno(s) == 0x524 && scc_partno(s) == 0x547)
which is clearly wrong as it is never true.
This register is present on all board types except AN524
and AN527; correct the condition.
Fixes: 6ac8081894 ("hw/misc/mps2-scc: Implement changes for AN547")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-6-peter.maydell@linaro.org
QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().
Since we don't model the SoC, just use a QOM container.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().
This commit plug the devices which aren't part of the SoC;
they will be plugged into a SoC container in the next one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240213155214.13619-3-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An access fault is raised when the Access Flag is not set in the
looked-up PTE and the AFFD field is not set in the corresponding context
descriptor. This was already implemented for stage 2. Implement it for
stage 1 as well.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240213082211.3330400-1-luc.michel@amd.com
[PMM: tweaked comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patchset adding the GMAC ethernet to this SoC crossed in the
mail with the patchset cleaning up the NIC handling. When we
create the GMAC modules we must call qemu_configure_nic_device()
so that the user has the opportunity to use the -nic commandline
option to create a network backend and connect it to the GMACs.
Add the missing call.
Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a
non-secure EL2 virtual timer. We implemented the timer itself in the
CPU model, but never wired up its IRQ line to the GIC.
Wire up the IRQ line (this is always safe whether the CPU has the
interrupt or not, since it always creates the outbound IRQ line).
Report it to the guest via dtb and ACPI if the CPU has the feature.
The DTB binding is documented in the kernel's
Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml
and the ACPI table entries are documented in the ACPI specification
version 6.3 or later.
Because the IRQ line ACPI binding is new in 6.3, we need to bump the
FADT table rev to show that we might be using 6.3 features.
Note that exposing this IRQ in the DTB will trigger a bug in EDK2
versions prior to edk2-stable202311, for users who use the virt board
with 'virtualization=on' to enable EL2 emulation and are booting an
EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is
that EDK2 will assert on bootup:
ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48
If you see that assertion you should do one of:
* update your EDK2 binaries to edk2-stable202311 or newer
* use the 'virt-8.2' versioned machine type
* not use 'virtualization=on'
(The versions shipped with QEMU itself have the fix.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
Suppress the deprecation warning when we're running under qtest,
to avoid "make check" including warning messages in its output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206154151.155620-1-peter.maydell@linaro.org
The raven_io_ops MemoryRegionOps is the only one in the source tree
which sets .valid.unaligned to indicate that it should support
unaligned accesses and which does not also set .impl.unaligned to
indicate that its read and write functions can do the unaligned
handling themselves. This is a problem, because at the moment the
core memory system does not implement the support for handling
unaligned accesses by doing a series of aligned accesses and
combining them (system/memory.c:access_with_adjusted_size() has a
TODO comment noting this).
Fortunately raven_io_read() and raven_io_write() will correctly deal
with the case of being passed an unaligned address, so we can fix the
missing unaligned access support by setting .impl.unaligned in the
MemoryRegionOps struct.
Fixes: 9a1839164c ("raven: Implement non-contiguous I/O region")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards,
connect FIQ output of the GIC CPU interfaces to the CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240130152548.17855-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the Rutabaga GPU device frees resources, it calls
rutabaga_resource_unref for that resource_id. However, when the generic
VirtIOGPU functions destroys resources, it only removes the
virtio_gpu_simple_resource from the device's VirtIOGPU->reslist list.
The rutabaga resource associated with that resource_id is then leaked.
This commit overrides the resource_destroy class method introduced in
the previous commit to fix this.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <e3778e44c98a35839de2f4938e5355449fa3aa14.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When destroying/unrefing resources, devices such as virtio-gpu-rutabaga
need to do their own bookkeeping (free rutabaga resources that are
associated with the virtio_gpu_simple_resource).
This commit adds a class method so that virtio-gpu-rutabaga can override
it in the next commit.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <b0a86630c4d601f3a269fd7e08cfefc13bd4e219.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While the VirtioGPU type has a reset_bh field to specify a reset
callback, it's never used. virtio_gpu_reset() calls the general
virtio_gpu_reset_bh() function for all devices that inherit from
VirtioGPU.
While no devices override reset_bh at the moment, a device reset might
require special logic for implementations in the future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <87fb4fa72ce5b341a6f957513a00dcb79fd5997f.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_smbios_type8_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: fd8caa253c ("hw/smbios: support for type 8 (port connector)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240129-smbios-v2-2-9ee6fede0d10@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_smbios_type11_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: 2d6dcbf93f ("smbios: support setting OEM strings table")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240129-smbios-v2-1-9ee6fede0d10@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virgl_renderer_resource_get_info() returns errno and not -1 on error.
Correct the return-value check.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20240129073921.446869-1-dmitry.osipenko@collabora.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously not all references mentioned any spec version at all.
Given r3.1 is the current specification available for evaluation at
www.computeexpresslink.org update references to refer to that.
Hopefully this won't become a never ending job.
A few structure definitions have been updated to add new fields.
Defaults of 0 and read only are valid choices for these new DVSEC
registers so go with that for now.
There are additional error codes and some of the 'questions' in
the comments are resolved now.
Update documentation reference to point to the CXL r3.1 specification
with naming closer to what is on the cover.
For cases where there are structure version numbers, add defines
so they can be found next to the register definitions.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the reported version was 1 so there should be no changes,
a couple of fields (where the value 0 was valid) were not
defined. Make those explicit and update references to be based
on CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of bringing all of CXL emulation inline with CXL r3.1.
No functional changes.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of standardizing the QEMU code on CXL r3.1.
No fuctional changes as everything added is optional and
it is set as not implemented.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Found whilst testing a series for the linux kernel that actually
bothers to check if enabled is set. 0xB is the option used
for vast majority of DSDT entries in QEMU.
It is a little odd for a device that doesn't really exist and
is simply a hook to tell the OS there is a CEDT table but 0xB
seems a reasonable choice and avoids need to special case
this device in the OS.
Means:
* Device present.
* Device enabled and decoding it's resources.
* Not shown in UI
* Functioning properly
* No battery (on this device!)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-12-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes Coverity ID 1522368.
Currently error_fatal is set if interleave_ways_dec() is going to return 0
but we should handle that zero return explicitly.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
a NULL parameter is enough for a NULL MemoryRegionOps
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cache_mem_ops.{read,write}() interprets opaque as
CXLComponentState(cxl_cstate) instead of ComponentRegisters(cregs).
Fortunately, cregs is the first member of cxl_cstate, so their values are
the same.
Fixes: 9e58f52d3f ("hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)")
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the current mdev_reg_read() implementation, it consistently returns
that the Media Status is Ready (01b). This was fine until commit
25a52959f9 ("hw/cxl: Add support for device sanitation") because the
media was presumed to be ready.
However, as per the CXL 3.0 spec "8.2.9.8.5.1 Sanitize (Opcode 4400h)",
during sanitation, the Media State should be set to Disabled (11b). The
mentioned commit correctly sets it to Disabled, but mdev_reg_read()
still returns Media Status as Ready.
To address this, update mdev_reg_read() to read register values instead
of returning dummy values.
Note that __toggle_media() managed to not only write something
that no one read, it did it to the wrong register storage and
so changed the reported mailbox size which was definitely not
the intent. That gets fixed as a side effect of allocating
separate state storage for this register.
Fixes: commit 25a52959f9 ("hw/cxl: Add support for device sanitation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Two functions were reported to have dead code, remove the bogus
branches altogether, as well as a misplaced qemu_log call.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The addition of the DCD support for CXL type-3 devices extended the CDAT
table large enough that the checksum being returned was incorrect.[1]
This was because the checksum value was using the header length field
rather than each of the 4 bytes of the length field. This was
previously not seen because the length of the CDAT data was less than
256 thus resulting in an equivalent checksum value.
Properly calculate the checksum for the CDAT header.
[1] https://lore.kernel.org/all/20231116-fix-cdat-devm-free-v1-1-b148b40707d7@intel.com/
Fixes: aba578bdac ("hw/cxl/cdat: CXL CDAT Data Object Exchange implementation")
Cc: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As a failure of g_malloc() will result in QEMU exiting, it
won't return a NULL to check. As such, drop the incorrect handling
of such NULL returns in the cdat table building code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As g_malloc0/g_malloc() will just exit QEMU on failure there is no
point in checking for it failing.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callback for building CDAT tables may return negative error codes.
This was previously unhandled and will result in potentially huge
allocations later on in ct3_build_cdat()
Detect the negative error code and defer cdat building.
Fixes: f5ee7413d5 ("hw/mem/cxl-type3: Add CXL CDAT Data Object Exchange")
Cc: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s->smmu_pcibus_by_bus_num is a SMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to smmu_iommu_mr() providing the wrong iommu MR.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-3-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to endpoint binding to wrong iommu MR in
virtio_iommu_get_endpoint(), then vfio device setup wrong
mapping from other device.
Remove the memset in virtio_iommu_device_realize() to avoid
redundancy with memset in system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIA south bridges are able to relocate and toggle (enable or disable) their
SuperI/O functions. So far this is hardcoded such that all functions are always
enabled and are located at fixed addresses.
Some PC BIOSes seem to probe for I/O occupancy before activating such a function
and issue an error in case of a conflict. Since the functions are currently
enabled on reset, conflicts are always detected. Prevent that by implementing
relocation and toggling of the SuperI/O functions.
Note that all SuperI/O functions are now deactivated upon reset (except for
VT82C686B's serial ports where Fuloong 2e's rescue-yl seems to expect them to be
enabled by default). Rely on firmware to configure the functions accordingly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-12-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a preparation for implementing relocation and toggling of SuperI/O
functions in the VT8231 device model. Upon reset, all SuperI/O functions will be
deactivated, so in case if no -bios is given, let the machine configure those
functions the same way Pegasos II firmware would do.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_parallel_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_serial_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_fdc_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ParallelState::portio_list isn't used inside ParallelState context but only
inside ISAParallelState context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FDCtrl::iomem isn't used inside FDCtrl context but only inside FDCtrlSysBus
context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FDCtrl::portio_list isn't used inside FDCtrl context but only inside
FDCtrlISABus context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The if statement currently uses double negation when executing the else branch.
So swap the branches and simplify the condition to make the code more
comprehensible.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds XTSup configuration to let user choose to whether enable
this feature or not. When XTSup is enabled, additional bytes in IRTE with
enabled guest virtual VAPIC are used to support 32-bit destination id.
Additionally, this commit exports IVHD type 0x11 besides the old IVHD type
0x10 in ACPI table. IVHD type 0x10 does not report full set of IOMMU
features only the legacy ones, so operating system (e.g. Linux) may only
detects x2APIC support if IVHD type 0x11 is available. The IVHD type 0x10
is kept so that old operating system that only parses type 0x10 can detect
the IOMMU device.
Besides, an amd_iommu-stub.c file is created to provide the definition for
amdvi_extended_feature_register when CONFIG_AMD_IOMMU=n. This function is
used by acpi-build.c to get the extended feature register value for
building the ACPI table. When CONFIG_AMD_IOMMU=y, this function is defined
in amd_iommu.c.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-7-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As userspace APIC now supports x2APIC, intel interrupt remapping
hardware can be set to EIM mode when userspace local APIC is used.
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-5-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input is in the input folder. On the other hand, the folder
'hw/virtio' maintains other virtio stubs (e.g. I2C, RNG, GPIO, etc).
This patch moves vhost-user-input into the virtio folder for better code
organization. No functionality change.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-4-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Virtio input device invokes set_config() callback for retrieving
the event configuration info, but the callback is not supported in
vhost-user-base.
This patch adds support set_config() callback in vhost-user-base.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231120043721.50555-2-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are about to convert at least one stubs which was using the async
teardown so lets use it for all the cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This series has involved rewriting and/or updating a considerable part of the ESP
emulation so update the copyright in esp.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-89-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The use of the DEFINE_TYPES() macro will soon be recommended over the use of
calling type_init() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240112125420.514425-88-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently the DRQ IRQ is updated every time DMA data is sent/received which
is both inefficient and causes excessive logging of the DRQ state. Add a
new drq_state bool that only updates the DRQ IRQ if its state changes.
This commit adds the new drq_state bool to the migration state: since the
version number has already been increased earlier in the series, there is
no need to repeat it again here. The DRQ IRQ is (currently) only used for
PDMA transfers which already have a migration break in this series so
there are no problems setting its value post-load.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-87-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The IRQ represented by irq_data is actually the DRQ (DMA request) line so rename
it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-86-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The Transfer Pad command is used to either drop incoming FIFO data during the
DATA IN phase or generate a series of zero bytes in the FIFO during the DATA
OUT phase.
Implement the DMA Transfer Pad command for the DATA phases which is used by
the NeXTCube firmware in the DATA IN phase to ignore part of the incoming SCSI
data as it is copied into memory.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-85-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This brings esp_do_nodma() in line with esp_do_dma().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-84-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows the removal of duplicate logic shared between the two implementations.
Note that we restrict esp_raise_drq() to PDMA to help reduce the log verbosity
for normal DMA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-83-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This variable can be replaced by the existing len variable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-82-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows the removal of duplicate logic shared between the two implementations.
Note that we restrict esp_raise_drq() to PDMA to help reduce the log verbosity
for normal DMA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-81-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows the removal of duplicate logic shared between the two implementations.
Note that we restrict esp_raise_drq() to PDMA to help reduce the log verbosity
for normal DMA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-80-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows the removal of duplicate logic shared between the two implementations.
Note that we restrict esp_raise_drq() to PDMA to help reduce the log verbosity
for normal DMA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-79-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The contents of the FIFO should only be copied to cmdfifo for ESP commands that
are sending data to the SCSI bus, which are the SEL_* commands and the TI
command. Otherwise any incoming data should be held in the FIFO as normal.
This fixes booting of NetBSD m68k under the Q800 machine once again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-78-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The contents of the FIFO should only be copied to cmdfifo for ESP commands that
are sending data to the SCSI bus, which are the SEL_* commands and the TI
command. Otherwise any incoming data should be held in the FIFO as normal.
This fixes booting of really old 32-bit SPARC Linux kernels such as Aurelien's
debian_etch_sparc_small.qcow2 test image.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-77-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The ESP_RSEQ logic is scattered in a few places throughout the ESP state machine
which is mainly because the ESP_RSEQ register isn't always reset when executing
an ESP select command. Once this is done, the ESP_RSEQ register only needs to be
updated at the point where the sequencer command completes.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-76-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Certain versions of MacOS send the first 5 bytes of the CDB using DMA and then
send the last byte of the CDB by writing to the FIFO. Update the non-DMA state
machine to detect the end of the CDB and execute the SCSI command using similar
logic as that which already exists for transferring the remainder of the CDB
using the ESP TI command.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-75-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The latest state machines can handle mixing DMA and non-DMA FIFO access for all
SCSI phases except DATA IN and DATA OUT. For DATA IN and DATA OUT phases, the
transfer is complete when TC == 0 and the updated logic will now handle TC
underflow correctly, which makes it just about impossible to manually manipulate
the FIFO during a DMA transfer.
Remove the restriction on FIFO read access when DMA memory routines are defined
which also allows the NeXTCube machine to pass its self-test.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-74-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Detect the case where the guest underflows TC by requesting a DMA transfer which
is larger than the available data. If this case is detected, immediately
complete the SCSI request and handle any remaining FIFO accesses in the STATUS
phase by raising INTR_BS once the FIFO is below the threshold.
Note that handling the premature SCSI bus phase change in the case of TC
underflow fixes booting EMILE on m68k once again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-73-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
According to the documentation ESP_RSTAT is cleared (except the STAT_TC bit)
when ESP_RINTR is read. This should not include the SCSI bus phase bits which
are currently live from the SCSI bus, otherwise the current SCSI phase is lost
when clearing an end-of-transfer interrupt.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-72-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Both esp_raise_irq() and esp_lower_irq() check the STAT_INT bit in ESP_RSTAT
to ensure that the IRQ is raised or lowered if its state changes. When reading
ESP_RINTR, esp_lower_irq() was being called *after* ESP_RSTAT had been
cleared meaning that STAT_INT was already clear, and so if STAT_INT was
asserted beforehand then the esp_lower_irq() would have no effect.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-71-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The end of command sequences for the ICCS command are currently different
between the DMA and non-DMA versions, and also different from the description
in the datasheet.
Update the sequence so that only INTR_FC is asserted in both cases, and keep
all the logic in esp_do_dma() and esp_do_nodma() rather than having some of
it within esp_run_cmd().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-70-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This moves the remaining non-DMA STATUS and MESSAGE IN phase logic from
write_response() to esp_do_nodma(). Note that we can also now drop the extra
fifo_reset() which is no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-69-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the esp_do_nodma() state machine correctly handles incoming FIFO
data, all remaining users of get_cmd() can be replaced with esp_do_nodma()
and the get_cmd() function removed completely.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-68-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently any write to the ESP FIFO in the MESSAGE OUT or COMMAND phases will
manually raise the bus service interrupt. Instead of duplicating the interrupt
logic in esp_reg_write(), update esp_do_nodma() to correctly process incoming
FIFO data during the MESSAGE OUT and COMMAND phases. Part of this change is to
call esp_nodma_ti_dataout() from handle_ti() to ensure that the DATA OUT phase
FIFO transfer only occurs when executing a non-DMA TI command instead of for
each byte entering the FIFO.
One slight complication is that NextSTEP uses multiple TI commands to transfer
the CDB one byte at a time (as opposed to loading the FIFO and using a single
TI command), so it is necessary to determine the expected length of the SCSI
CDB being received. This is handled by the introduction of a new
esp_cdb_length() function which returns the expected SCSI CDB length based
upon the first command byte.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-67-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is to allow the logic to be moved during the next commit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-66-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In the case where a SCSI command with a DATA IN phase has been issued, the host
may preload the FIFO with unaligned bytes before issuing the main DMA transfer.
When accumulating data in the FIFO don't raise the INTR_BS interrupt until the
TI command is issued, otherwise the unexpected interrupt can confuse the host.
In particular this is needed to prevent the MacOS Disk Utility from failing
when switching non-DMA transfers to use esp_do_nodma().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-65-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
According to the datasheet the previous ESP command remains in the ESP_CMD
register, which caused a problem when consecutive TI commands were issued as
it becomes impossible for the state machine to know when the first TI
command finishes.
This was the original reason for introducing the ti_cmd field which kept
track of the last written command for this purpose. However closer reading
of the datasheet shows that a TI command that terminates due to a change of
SCSI target phase resets the ESP_CMD register to zero which solves this
problem.
Now that this has been fixed in the previous commit, remove the unneeded
ti_cmd field and access the ESP_CMD register directly instead. Bump the
vmstate_esp version to indicate that the ti_cmd field is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-64-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is the behaviour documented in the datasheet and allows the state machine
to correctly process multiple consecutive TI commands.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-63-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Whilst the FIFO is used a storage buffer for both DMA and non-DMA requests, the
loading and unloading is managed directly issuing commands to the ESP. As a
result there is no need to manually invoke the non-DMA command handler.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-62-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This brings DATA OUT transfers in line with DATA IN transfers by ensuring that
the guest visible function complete interrupt is only set once the SCSI layer
has returned.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-61-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The handling of the INTR_FC and INTR_BS bits is different depending upon the
last command executed by the ESP. Note that currently INTR_FC is managed
elsewhere, but that will change soon.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-60-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The handling of the INTR_FC and INTR_BS bits is different depending upon the
last command executed by the ESP. Note that currently INTR_FC is managed
elsewhere, but that will change soon.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-59-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This field is currently used to handle deferred interrupts for the DATA IN phase
but the code will soon be updated to do the same for the DATA OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-58-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Note that this is a migration break for the q800 machine because the extra PDMA
information is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-57-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There is now only a single implementation contained within esp_do_dma() so
call it directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-56-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in write_response_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-55-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the DMA logic is identical between do_dma_pdma_cb() and esp_do_dma()
we can replace do_dma_pdma_cb() with esp_do_dma().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-54-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_stop_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-53-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This can now be done using the existing logic in esp_do_dma() and do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-52-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The existing check for TC == 0 is only valid during a TI command.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-51-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_pdma_cb() is now no longer required since esp_do_dma()
can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-50-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This makes it clearer that ATN is asserted until the end of the next TI command
in the MESSAGE OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-49-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This makes it clearer that ATN is asserted until the end of the next TI command
in the MESSAGE OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-48-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This makes it clearer that ATN is asserted until the end of the next TI command
in the MESSAGE OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-47-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the accumulation of the CDB is handled by SCSI phase, there is no need
for a separate variable to control it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-46-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently do_cmd is used to determine whether MESSAGE OUT and COMMAND phase data
is being accumulated in cmdfifo. Update esp_do_dma() to check directly for these
two SCSI phases instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-45-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently do_cmd is used to determine whether MESSAGE OUT and COMMAND phase data
is being accumulated in cmdfifo. Update esp_do_dma() to check directly for these
two SCSI phases instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-44-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently do_cmd is used to determine whether MESSAGE OUT and COMMAND phase data
is being accumulated in cmdfifo. Update esp_do_dma() to check directly for these
two SCSI phases instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-43-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently do_cmd is used to determine whether MESSAGE OUT and COMMAND phase data
is being accumulated in cmdfifo. Update esp_do_dma() to check directly for these
two SCSI phases instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-42-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently only the DATA IN and DATA OUT phases are supported.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-41-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently only the DATA IN and DATA OUT phases are supported.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-40-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently only the DATA IN and DATA OUT phases are supported.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-39-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Make use of this new function in all places where the SCSI phase bits are
manually masked from the ESP_RSTAT register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240112125420.514425-38-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This can now be handled by the existing do_dma_pdma_cb() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-37-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now it is possible to move the end of SCSI transfer check to after the TC
adjustment in do_dma_pdma_cb() when transferring data from the device
without triggering an assert() in the SCSI code. This brings this check in
line with all the others in esp_do_dma() and do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-36-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In the PDMA case the last transfer from the device to the FIFO has occurred
(async_len is zero) but esp_do_dma() is still being called to drain the
remaining FIFO contents.
The additional non-zero transfer check ensures that we still defer the SCSI
layer in the case where we are waiting for data for a TI command or a DMA
enable signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-35-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is so that PDMA transfers can be performend by esp_do_dma() as well as
do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-34-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is so that PDMA transfers can be performend by esp_do_dma() as well as
do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-33-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is because a single DMA request can be transferred using multiple TI
commands, and so a TC equal to zero may not represent the completion of
the SCSI DMA command.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-32-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps simplify the existing implementation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-31-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There are two cases here: the first is when the TI command underflows, in which
case we raise INTR_BS to indicate an early change of phase, and the second is
when the TI command overflows because the host requested a transfer for more
data than is available. In the latter case force TC to zero so that the TI
completion logic executes correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-30-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Ensure that the async_len checks for requesting data from the SCSI layer and
the TC == 0 checks to detect the end of the DMA transfer are consistent in both
do_dma_pdma_cb() and esp_do_dma(). In particular this involves adding the check
to see if the FIFO is at its low threshold since PDMA and mixed DMA and non-DMA
requests can leave data remaining in the FIFO.
At the same time update all the comments so that they are also consistent between
all similar code paths.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-29-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Since esp_dma_done() is called in both cases, and ti_size cannot be zero
(otherwise esp_command_complete() would have been called instead), replace
the conditional logic with a single call to esp_dma_done().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-28-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The following ti_cmd checks ensure that only DMA and non-DMA TI commmands will
can call into the esp_do_dma() and esp_do_nodma() callbacks.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-27-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
With the latest changes this condition cannot occur anymore and so the logic
can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-26-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the TC is updated for each PDMA access (rather than once the FIFO is
full) there is no need to adjust the TC at start of each DMA transfer if the
FIFO is not empty.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In the case when more data is requested from the SCSI layer during a DMA data
transfer from a device, don't immediately fall through to the TC check logic.
Otherwise when TC is zero INTR_BS will be raised immediately rather than when
the next set of SCSI data is ready.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Rather than wait for the FIFO to fill up before calling the PDMA callback, push
that logic directly into the from_device logic in do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Ensure that esp_dma_done() is only called when TC is zero, which is currently
always the case for DMA transfers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
No change to the condition itself, other than to clarify that esp_dma_done()
must be called when TC is zero.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The TI end of transfer interrupt only occurs when the TC reaches zero and is
not related to the SCSI layer transfer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The internal state of the ESP sequencer is not affected when raising an interrupt
to indicate the end of a DMA transfer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There is no need to manually reset these values as the ESP emulation now
correctly handles them within its existing logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This workaround is no longer required with the current code and so can be
removed.
[Note: whilst MacOS itself can boot correctly, removing this hack prevents
a bootable EMILE CDROM from working. This is caused by a separate bug which
will be fixed by a subsequent patch]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Following on from the recent changes to when the TC is updated, it is now
possible to remove another set of manual STAT_TC updates so that its state
is now managed within esp_set_tc().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is used to set the current SCSI bus phase in the ESP_RSTAT register
without affecting any of flag bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is to ensure that STAT_TC is triggered during the right parts of the
transfer when it is controlled exclusively by the TC.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead accumulate in the real FIFO as done in real hardware, and then transfer
to cmdfifo when we're ready to process the MESSAGE OUT and COMMAND phase data.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The do_cmd variable is only set for the MESSAGE OUT and COMMAND phases i.e.
those which involve transfers from the host to the SCSI bus, and so the unused
case can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The ultimate aim is to for esp_do_dma() behaviour to be determined by the SCSI
bus phase, in which case it is necessary to have separate to/from device paths.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Invert the logic so that the end of DMA transfer check becomes one that checks
for TC == 0 in the from device path in do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps to simplify esp_reg_write() and potentially allows for a 2-level
deep FIFO to be implemented in future.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This should be exclusively managed by esp_set_tc() rather than being manually
set in multiple places. Start by removing the occurrences exclusive to PDMA
and command completion which are those that can be currently removed without
affecting any test images.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This flag is set once the transfer counter counts down to zero.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Since the DREQ value depends upon the result of the selection process, add a
workaround to each esp_select() to manually assert DREQ durring the MESSAGE OUT
and COMMAND phases.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The FIFO contents should not be affected by performing SCSI target selection.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The fifo8_pop_buf() function returns a pointer to the FIFO buffer up to the
specified length. Since the FIFO buffer is modelled as an array then once
the FIFO wraps around, only the continuous portion of the buffer can be
returned.
In future the use of continuous and unaligned accesses will advance the
internal FIFO head pointer, so modify esp_fifo_pop_buf() to ensure that
any wraparound content is also returned up to the requested length.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Since get_cmd() can be called multiple times during a mixed FIFO/DMA request,
move the existing request cancel check into esp_select() which always occurs
at the start of new SCSI request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The FIFO contents should not be affected if the target selection fails.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
=RA0B
-----END PGP SIGNATURE-----
Merge tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Enhancements and fixes
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
# X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
# CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
# =RA0B
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 23:47:13 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa/machine: Load 64-bit firmware on 64-bit machines
target/hppa: Update SeaBIOS-hppa to version 16
hw/net/tulip: add chip status register values
target/hppa: PDC_BTLB_INFO uses 32-bit ints
target/hppa: Allow read-access to PSW with rsm 0,reg instruction
lasi: Add reset I/O ports for LASI audio and FDC
target/hppa: Implement do_transaction_failed handler for I/O errors
lasi: allow access to LAN MAC address registers
hw/pci-host/astro: Implement Hard Fail and Soft Fail mode
hw/pci-host/astro: Avoid aborting on access failure
target/hppa: Add "diag 0x101" for console output support
disas/hppa: Add disassembly for qemu specific instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_smbios_type8_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: fd8caa253c ("hw/smbios: support for type 8 (port connector)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_smbios_type11_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: 2d6dcbf93f ("smbios: support setting OEM strings table")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use device_class_set_parent_realize() to set parent realize() directly.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use device_class_set_parent_realize() to set parent realize() directly.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use device_class_set_parent_realize() to set parent realize() directly.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use device_class_set_parent_realize() to set parent realize() directly.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Load the 64-bit SeaBIOS-hppa firmware by default when running on a 64-bit
machine. This will enable us to later support more than 4GB of RAM and is
required that the OS (or PALO bootloader) will start or install a 64-bit kernel
instead of a 32-bit kernel.
Note that SeaBIOS-hppa v16 provides the "-fw_cfg opt/OS64,string=3" option with
which the user can control what the firmware shall report back to the OS:
Support of 32-bit OS, support of a 64-bit OS, or support for both (default).
Wrap firmware loading inside !qtest_enabled() to avoid this warning with
qtest: "qemu-system-hppa: no firmware provided".
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Netbsd isn't able to detect a link on the emulated tulip card. That's
because netbsd reads the Chip Status Register of the Phy (address
0x14). The default phy data in the qemu tulip driver is all zero,
which means no link is established and autonegotation isn't complete.
Therefore set the register to 0x3b40, which means:
Link is up, Autonegotation complete, Full Duplex, 100MBit/s Link
speed.
Also clear the mask because this register is read only.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
Firmware and qemu reads and writes the MAC address for the LASI LAN via
registers in LASI. Allow those accesses and return zero even if LASI
LAN isn't enabled to avoid HPMCs (=crashes).
Signed-off-by: Helge Deller <deller@gmx.de>
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Instead of stopping the emulation, report a MEMTX_DECODE_ERROR if the OS
tries to access non-existent registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
-----BEGIN PGP SIGNATURE-----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=yuRM
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmXGBRAACgkQr3yVEwxT
# gBPqVA//etMiwP8+lQb2E4pw+QwBIzpm3qFyBlqgSCFrekj1u2kYNd4CH3CKurWE
# ysoQ6OAMeb0MUbRHdjrejjzD/wOg7JNA9h7ynM1VbupveBrJY3GWC6qQWSG+A1j/
# LSgmr/dDya74chDxjxa+7ld3xqloHi5OtdGaeORfdPXl7mjCCKKCoSKYCex1ykup
# uuB7bsjeWeWEbuUsntmeuHJLZJuhpnbuZJmp17tEo+3vWXqjxV00Lik+XMwh3gua
# KOLiAqHjGr2NEhA3Mg1JLcQ+6JLTDM9ugZpQeNGQwMkfuB/RAU7jO/1Di3flbadF
# 8l2xOHu3mydDbfdxTGZNJjcIrMTX/YEewAYZLRYpNsyPOMntgq8HEegwCdWGvK7C
# M5Tc59MNSuBt+zkZkHd21qLYusa2ThP4YT/schh7IA+2F1TSKdhlptEzi2oebIc7
# ilLSgZ9Of72QlAH2OPJNSAL9Nbc06MHEM0JiHIJa5u+XdcVRhZus5h1YIOKXisqF
# YPP22RnI5Jj5d5csa/0ONAZGFh5SRMTJtpjKoKSkzoYJWDjCQ2MiUAOmLscchMZd
# wbK0vjeRf6kRG4U4z7nTmHS9kzH8RXUZDecVcOITuMpKih9LhUiCZ+xPunFYPycJ
# WNFa9/pENcCXJweXvtk4NHwx933rX56678lF6KY2hwUwwaiBOv4=
# =yuRM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 10:57:20 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu: (61 commits)
target/riscv: add rv32i, rv32e and rv64e CPUs
target/riscv/cpu.c: add riscv_bare_cpu_init()
target/riscv: Enable xtheadsync under user mode
qemu-options: enable -smbios option on RISC-V
target/riscv: SMBIOS support for RISC-V virt machine
smbios: function to set default processor family
smbios: add processor-family option
target/riscv: support new isa extension detection devicetree properties
target/riscv: use misa_mxl_max to populate isa string rather than TARGET_LONG_BITS
target/riscv: Expose Zaamo and Zalrsc extensions
target/riscv: Check 'A' and split extensions for atomic instructions
target/riscv: Add Zaamo and Zalrsc extension infrastructure
hw/riscv/virt.c: use g_autofree in create_fdt_*
hw/riscv/virt.c: use g_autofree in virt_machine_init()
hw/riscv/virt.c: use g_autofree in create_fdt_virtio()
hw/riscv/virt.c: use g_autofree in create_fdt_sockets()
hw/riscv/virt.c: use g_autofree in create_fdt_socket_cpus()
hw/riscv/numa.c: use g_autofree in socket_fdt_write_distance_matrix()
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
target/riscv: Use RISCVException as return type for all csr ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generate SMBIOS tables for the RISC-V mach-virt.
Add CONFIG_SMBIOS=y to the RISC-V default config.
Set the default processor family in the type 4 table.
The implementation is based on the corresponding ARM and Loongson code.
With the patch the following firmware tables are provided:
etc/smbios/smbios-anchor
etc/smbios/smbios-tables
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-4-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Provide a function to set the default processor family.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-3-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For RISC-V the SMBIOS standard requires specific values of the processor
family value depending on the bitness of the CPU.
Add a processor-family option for SMBIOS table 4.
The value of processor-family may exceed 255 and therefore must be provided
in the Processor Family 2 field. Set the Processor Family field to 0xFE
which signals that the Processor Family 2 is used.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-2-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A few months ago I submitted a patch to various lists, deprecating
"riscv,isa" with a lengthy commit message [0] that is now commit
aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux
kernel tree. Primarily, the goal was to replace "riscv,isa" with a new
set of properties that allowed for strictly defining the meaning of
various extensions, where "riscv,isa" was tied to whatever definitions
inflicted upon us by the ISA manual, which have seen some variance over
time.
Two new properties were introduced: "riscv,isa-base" and
"riscv,isa-extensions". The former is a simple string to communicate the
base ISA implemented by a hart and the latter an array of strings used
to communicate the set of ISA extensions supported, per the definitions
of each substring in extensions.yaml [1]. A beneficial side effect was
also the ability to define vendor extensions in a more "official" way,
as the ISA manual and other RVI specifications only covered the format
for vendor extensions in the ISA string, but not the meaning of vendor
extensions, for obvious reasons.
Add support for setting these two new properties in the devicetrees for
the various devicetree platforms supported by QEMU for RISC-V. The Linux
kernel already supports parsing ISA extensions from these new
properties, and documenting them in the dt-binding is a requirement for
new extension detection being added to the kernel.
A side effect of the implementation is that the meaning for elements in
"riscv,isa" and in "riscv,isa-extensions" are now tied together as they
are constructed from the same source. The same applies to the ISA string
provided in ACPI tables, but there does not appear to be any strict
definitions of meanings in ACPI land either.
Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud>
[ Changes by AF:
- Rebase on recent changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a lot of cases where a char or an uint32_t pointer is used once
to alloc a string/array, read/written during the function, and then
g_free() at the end. There's no pointer re-use - a single alloc, a
single g_free().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'soc_name' to the loop, and give it g_autofree, to avoid the manual
g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Put 'name' declaration inside the loop, with g_autofree, to avoid
manually doing g_free() in each iteration.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'clust_name' inside the loop, and g_autofree, to avoid having to
g_free() manually in each loop iteration.
'intc_phandles' is also g_autofreed to avoid another manual g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move all char pointers to the loop. Use g_autofree in all of them to
avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240122221529.86562-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use g_autofree in 'dist_matrix' to avoid the manual g_free().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'isa' char pointer isn't being freed after use.
Issue detected by Valgrind:
==38752== 128 bytes in 1 blocks are definitely lost in loss record 3,190 of 3,884
==38752== at 0x484280F: malloc (vg_replace_malloc.c:442)
==38752== by 0x5189619: g_malloc (gmem.c:130)
==38752== by 0x51A5BF2: g_strconcat (gstrfuncs.c:628)
==38752== by 0x6C1E3E: riscv_isa_string_ext (cpu.c:2321)
==38752== by 0x6C1E3E: riscv_isa_string (cpu.c:2343)
==38752== by 0x6BD2EA: build_rhct (virt-acpi-build.c:232)
==38752== by 0x6BD2EA: virt_acpi_build (virt-acpi-build.c:556)
==38752== by 0x6BDC86: virt_acpi_setup (virt-acpi-build.c:662)
==38752== by 0x9C8DC6: notifier_list_notify (notify.c:39)
==38752== by 0x4A595A: qdev_machine_creation_done (machine.c:1589)
==38752== by 0x61E052: qemu_machine_creation_done (vl.c:2680)
==38752== by 0x61E052: qmp_x_exit_preconfig.part.0 (vl.c:2709)
==38752== by 0x6220C6: qmp_x_exit_preconfig (vl.c:2702)
==38752== by 0x6220C6: qemu_init (vl.c:3758)
==38752== by 0x425858: main (main.c:47)
Fixes: ebfd392893 ("hw/riscv/virt: virt-acpi-build.c: Add RHCT Table")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
misa_mxl_max is common for all instances of a RISC-V CPU class so they
are better put into class.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-2-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Requests that complete in an IOThread use irqfd to notify the guest
while requests that complete in the main loop thread use the traditional
qdev irq code path. The reason for this conditional is that the irq code
path requires the BQL:
if (s->ioeventfd_started && !s->ioeventfd_disabled) {
virtio_notify_irqfd(vdev, req->vq);
} else {
virtio_notify(vdev, req->vq);
}
There is a corner case where the conditional invokes the irq code path
instead of the irqfd code path:
static void virtio_blk_stop_ioeventfd(VirtIODevice *vdev)
{
...
/*
* Set ->ioeventfd_started to false before draining so that host notifiers
* are not detached/attached anymore.
*/
s->ioeventfd_started = false;
/* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
blk_drain(s->conf.conf.blk);
During blk_drain() the conditional produces the wrong result because
ioeventfd_started is false.
Use qemu_in_iothread() instead of checking the ioeventfd state.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-15394
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240122172625.415386-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit d3f6f294ae ("virtio-blk: always set
ioeventfd during startup") has made virtio_blk_start_ioeventfd() always
kick the virtqueue (set the ioeventfd), regardless of whether the BB is
drained. That is no longer necessary, because attaching the host
notifier will now set the ioeventfd, too; this happens either
immediately right here in virtio_blk_start_ioeventfd(), or later when
the drain ends, in virtio_blk_ioeventfd_attach().
With event_notifier_set() removed, the code becomes the same as the one
in virtio_blk_ioeventfd_attach(), so we can reuse that function.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-4-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of commit 38738f7dbb ("virtio-scsi:
don't waste CPU polling the event virtqueue"), we only attach an io_read
notifier for the virtio-scsi event virtqueue instead, and no polling
notifiers. During operation, the event virtqueue is typically
non-empty, but none of the buffers are intended to be used immediately.
Instead, they only get used when certain events occur. Therefore, it
makes no sense to continuously poll it when non-empty, because it is
supposed to be and stay non-empty.
We do this by using virtio_queue_aio_attach_host_notifier_no_poll()
instead of virtio_queue_aio_attach_host_notifier() for the event
virtqueue.
Commit 766aa2de0f ("virtio-scsi: implement
BlockDevOps->drained_begin()") however has virtio_scsi_drained_end() use
virtio_queue_aio_attach_host_notifier() for all virtqueues, including
the event virtqueue. This can lead to it being polled again, undoing
the benefit of commit 38738f7dbb.
Fix it by using virtio_queue_aio_attach_host_notifier_no_poll() for the
event virtqueue.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: 766aa2de0f
("virtio-scsi: implement BlockDevOps->drained_begin()")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU's coding style generally forbids C99 mixed declarations.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206140410.65650-1-stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scsi_device_for_each_req_async() currently does not provide any way to
be awaited. One of its callers is scsi_device_purge_requests(), which
therefore currently does not guarantee that all requests are fully
settled when it returns.
We want all requests to be settled, because scsi_device_purge_requests()
is called through the unrealize path, including the one invoked by
virtio_scsi_hotunplug() through qdev_simple_device_unplug_cb(), which
most likely assumes that all SCSI requests are done then.
In fact, scsi_device_purge_requests() already contains a blk_drain(),
but this will not fully await scsi_device_for_each_req_async(), only the
I/O requests it potentially cancels (not the non-I/O requests).
However, we can have scsi_device_for_each_req_async() increment the BB
in-flight counter, and have scsi_device_for_each_req_async_bh()
decrement it when it is done. This way, the blk_drain() will fully
await all SCSI requests to be purged.
This also removes the need for scsi_device_for_each_req_async_bh() to
double-check the current context and potentially re-schedule itself,
should it now differ from the BB's context: Changing a BB's AioContext
with a root node is done through bdrv_try_change_aio_context(), which
creates a drained section. With this patch, we keep the BB in-flight
counter elevated throughout, so we know the BB's context cannot change.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Czenczek <hreitz@redhat.com> noted that the array index in
virtio_blk_dma_restart_cb() is not bounds-checked:
g_autofree VirtIOBlockReq **vq_rq = g_new0(VirtIOBlockReq *, num_queues);
...
while (rq) {
VirtIOBlockReq *next = rq->next;
uint16_t idx = virtio_get_queue_index(rq->vq);
rq->next = vq_rq[idx];
^^^^^^^^^^
The code is correct because both rq->vq and vq_rq[] depend on
num_queues, but this is indirect and not 100% obvious. Add an assertion.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not possible to instantiate a virtio-blk device with 0 virtqueues.
The following check is located in ->realize():
if (!conf->num_queues) {
error_setg(errp, "num-queues property must be larger than 0");
return;
}
Later on we access s->vq_aio_context[0] under the assumption that there
is as least one virtqueue. Hanna Czenczek <hreitz@redhat.com> noted that
it would help to show that the array index is already valid.
Add an assertion to document that s->vq_aio_context[0] is always
safe...and catch future code changes that break this assumption.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Czenczek <hreitz@redhat.com> noticed that the safety of
`vq_aio_context[vq->value] = ctx;` with user-defined vq->value inputs is
not obvious.
The code is structured in validate() + apply() steps so input validation
is there, but it happens way earlier and there is nothing that
guarantees apply() can only be called with validated inputs.
This patch moves the validate() call inside the apply() function so
validation is guaranteed. I also added the bounds checking assertion
that Hanna suggested.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240206190610.107963-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We used to check that the memory region size is multiples of the overall
requested address alignment for the device memory address.
We removed that check, because there are cases (i.e., hv-balloon) where
devices unconditionally request an address alignment that has a very large
alignment (i.e., 32 GiB), but the actual memory device size might not be
multiples of that alignment.
However, this change:
(a) allows for some practically impossible DIMM sizes, like "1GB+1 byte".
(b) allows for DIMMs that partially cover hugetlb pages, previously
reported in [1].
Both scenarios don't make any sense: we might even waste memory.
So let's reintroduce that check, but only check that the
memory region size is multiples of the memory region alignment (i.e.,
page size, huge page size), but not any additional memory device
requirements communicated using md->get_min_alignment().
The following examples now fail again as expected:
(a) 1M with 2M THP
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(b) 1G+1byte
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1073741825B \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(c) Unliagned hugetlb size (2M)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages/tmp,size=511M \
-device pc-dimm,id=dimm1,memdev=mem1
backend memory size must be multiple of 0x200000
(d) Unliagned hugetlb size (1G)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages1G/tmp,size=2047M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x40000000
Note that this fix depends on a hv-balloon change to communicate its
additional alignment requirements using get_min_alignment() instead of
through the memory region.
[1] https://lkml.kernel.org/r/f77d641d500324525ac036fe1827b3070de75fc1.1701088320.git.mprivozn@redhat.com
Message-ID: <20240117135554.787344-3-david@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Fixes: eb1b7c4bd4 ("memory-device: Drop size alignment check")
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The character "+" is now forbidden in QOM device names (see commit
b447378e12 - "Limit type names to alphanumerical and some few special
characters"). For the "power5+" and "power7+" CPU names, there is
currently a hack in type_name_is_valid() to still allow them for
compatibility reasons. However, there is a much nicer solution for this:
Simply use aliases! This way we can still support the old names without
the need for the ugly hack in type_name_is_valid().
Message-ID: <20240117141054.73841-2-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the maximum count of SCRIPTS instructions is reached, the code
stops execution and returns, but fails to decrement the reentrancy
counter. This effectively renders the SCSI controller unusable
because on next entry the reentrancy counter is still above the limit.
This bug was seen on HP-UX 10.20 which seems to trigger SCRIPTS
loops.
Fixes: b987718bbb ("hw/scsi/lsi53c895a: Fix reentrancy issues in the LSI controller (CVE-2023-0330)")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240128202214.2644768-1-svens@stackframe.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's implement the get_min_alignment() callback for memory devices, and
copy for the device memory region the alignment of the host memory
region. This mimics what virtio-mem does, and allows for re-introducing
proper alignment checks for the memory region size (where we don't care
about additional device requirements) in memory device core.
Message-ID: <20240117135554.787344-2-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Obtain the MAC address from the NIC configuration if there is one, or
generate one explicitly so that it can be placed in the PROM.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.
Fixes: b1419fa665 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The MIPS SIM platform instantiates its NIC only if a corresponding
configuration exists for it. Use qemu_create_nic_device() function for
that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.
Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.
Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The first sunhme NIC gets placed a function 1 on slot 1 of PCI bus A,
and the rest are dynamically assigned on PCI bus B.
Previously, any PCI NIC would get the special treatment purely by
virtue of being first in the list.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.
Now, the first rtl8139 gets slot 2 and everything else is dynamic.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Paolo Bonzini