We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the instructions in the load/store memory tags instruction
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-21-peter.maydell@linaro.org
Convert the ASIMD load/store single structure insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230602155223.2040685-20-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the instructions in the ASIMD load/store multiple structures
instruction classes to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-19-peter.maydell@linaro.org
Convert the instructions in the LDAPR/STLR (unscaled immediate)
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-18-peter.maydell@linaro.org
Convert the instructions in the load/store register (pointer
authentication) group ot decodetree: LDRAA, LDRAB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-17-peter.maydell@linaro.org
Convert the insns in the atomic memory operations group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-16-peter.maydell@linaro.org
Convert the LDR and STR instructions which take a register
plus register offset to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-15-peter.maydell@linaro.org
Convert the LDR and STR instructions which use a 12-bit immediate
offset to decodetree. We can reuse the existing LDR and STR
trans functions for these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-14-peter.maydell@linaro.org
Convert the load and store instructions which use a 9-bit
immediate offset to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-13-peter.maydell@linaro.org
Convert the "Load register (literal)" instruction class to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-11-peter.maydell@linaro.org
Convert the instructions in the load/store exclusive (STXR,
STLXR, LDXR, LDAXR) and load/store ordered (STLR, STLLR,
LDAR, LDLAR) to decodetree.
Note that for STLR, STLLR, LDAR, LDLAR this fixes an under-decoding
in the legacy decoder where we were not checking that the RES1 bits
in the Rs and Rt2 fields were set.
The new function ldst_iss_sf() is equivalent to the existing
disas_ldst_compute_iss_sf(), but it takes the pre-decoded 'ext' field
rather than taking an undecoded two-bit opc field and extracting
'ext' from it. Once all the loads and stores have been converted
to decodetree disas_ldst_compute_iss_sf() will be unused and
can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-9-peter.maydell@linaro.org
Convert the exception generation instructions SVC, HVC, SMC, BRK and
HLT to decodetree.
The old decoder decoded the halting-debug insnns DCPS1, DCPS2 and
DCPS3 just in order to then make them UNDEF; as with DRPS, we don't
bother to decode them, but document the patterns in a64.decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-8-peter.maydell@linaro.org
Convert MSR (reg), MRS, SYS, SYSL to decodetree. For QEMU these are
all essentially the same instruction (system register access).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the MSR (immediate) insn to decodetree. Our implementation
has basically no commonality between the different destinations,
so we decode the destination register in a64.decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-6-peter.maydell@linaro.org
Convert the CFINV, XAFLAG and AXFLAG insns to decodetree.
The old decoder handles these in handle_msr_i(), but
the architecture defines them as separate instructions
from MSR (immediate).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-5-peter.maydell@linaro.org
Convert the insns in the "Barriers" instruction class to
decodetree: CLREX, DSB, DMB, ISB and SB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the various instructions in the hint instruction space
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-3-peter.maydell@linaro.org
In the recent refactoring we missed a few places which should be
calling finalize_memop_asimd() for ASIMD loads and stores but
instead are just calling finalize_memop(); fix these.
For the disas_ldst_single_struct() and disas_ldst_multiple_struct()
cases, this is not a behaviour change because there the size
is never MO_128 and the two finalize functions do the same thing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In disas_ldst_reg_imm9() we missed one place where a call to
a gen_mte_check* function should now be passed the memop we
have created rather than just being passed the size. Fix this.
Fixes: 0a9091424d ("target/arm: Pass memop to gen_mte_check1*")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The LDG instruction loads the tag from a memory address (identified
by [Xn + offset]), and then merges that tag into the destination
register Xt. We implemented this correctly for the case when
allocation tags are enabled, but didn't get it right when ATA=0:
instead of merging the tag bits into Xt, we merged them into the
memory address [Xn + offset] and then set Xt to that.
Merge the tag bits into the old Xt value, as they should be.
Cc: qemu-stable@nongnu.org
Fixes: c15294c1e3 ("target/arm: Implement LDG, STG, ST2G instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The atomic memory operations are supposed to return the old memory
data value in the destination register. This value is not
sign-extended, even if the operation is the signed minimum or
maximum. (In the pseudocode for the instructions the returned data
value is passed to ZeroExtend() to create the value in the register.)
We got this wrong because we were doing a 32-to-64 zero extend on the
result for 8 and 16 bit data values, rather than the correct amount
of zero extension.
Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data
sizes rather than ext32u.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
Cortex A7 CPUs with an FPU implementing VFPv4 without NEON support
have 16 64-bit FPU registers and not 32 registers. Let users set the
number of VFP registers with a CPU property.
The primary use case of this property is for the Cortex A7 of the
Aspeed AST2600 SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fixes the build for --disable-tcg.
This header is only needed for cross-hosting. Without CONFIG_TCG,
we know this is an AArch64 host, CONFIG_ATOMIC64 will be set, and
the TCG_OVERSIZED_GUEST block will never be compiled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing EL0-accessible Debug Communication Channel (DCC) registers in
user mode emulation is currently enabled. However, it does not match
Linux behavior as Linux sets MDSCR_EL1.TDCC on startup to disable EL0
access to DCC (see __cpu_setup() in arch/arm64/mm/proc.S).
This patch fixes access_tdcc() to check MDSCR_EL1.TDCC for EL0 and sets
MDSCR_EL1.TDCC for user mode emulation to match Linux.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: DS7PR12MB630905198DD8E69F6817544CAC4EA@DS7PR12MB6309.namprd12.prod.outlook.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DC CVAP and DC CVADP instructions can be executed in EL0 on Linux,
either directly when SCTLR_EL1.UCI == 1 or emulated by the kernel (see
user_cache_maint_handler() in arch/arm64/kernel/traps.c).
This patch enables execution of the two instructions in user mode
emulation.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Push the mte check behind the exclusive_addr check.
Document the several ways that we are still out of spec
with this implementation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_LSE2 only requires that atomic operations not cross a
16-byte boundary. Ordered operations may be completely
unaligned if SCTLR.nAA is set.
Because this alignment check is so special, do it by hand.
Make sure not to keep TCG temps live across the branch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes a bug in that with SCTLR.A set, we should raise any
alignment fault before raising any MTE check fault.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the individual memop to gen_mte_checkN.
For the moment, do nothing with it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the completed memop to gen_mte_check1_mmuidx.
For the moment, do nothing more than extract the size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is required for LSE2, where the pair must be treated atomically if
it does not cross a 16-byte boundary. But it simplifies the code to do
this always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to duplicate this check across multiple call sites.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Round len_align to 16 instead of 8, handling an odd 8-byte as part
of the tail. Use MO_ATOM_NONE to indicate that all of these memory
ops have only byte atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that these two insns should have been using atomic
16-byte stores, since MTE is ARMv8.5 and LSE2 is mandatory from ARMv8.4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
load simplifies the code, and makes it a closer match to STXP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document the meaning of exclusive_high in a big-endian context,
and why we can't change it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-3-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé