bdrv_common_block_status_above() is a g_c_w, and it is being called by
many "wrapper" functions like bdrv_is_allocated(),
bdrv_is_allocated_above() and bdrv_block_status_above().
Because we want to eventually split the coroutine from non-coroutine
case in g_c_w, create duplicate wrappers that take care of directly
calling the same coroutine functions called in the g_c_w.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of bdrv_parent_drained_begin_single() pass poll=false now,
so we don't need the parameter any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-16-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to make sure that bdrv_replace_child_noperm() doesn't have to
poll any more, get rid of the bdrv_parent_drained_begin_single() call.
This is possible now because we can require that the parent is already
drained through the child in question when the function is called and we
don't call the parent drain callbacks more than once.
The additional drain calls needed in callers cause the test case to run
its code in the drain handler too early (bdrv_attach_child() drains
now), so modify it to only enable the code after the test setup has
completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-15-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ignore_bds_parents is now ignored during drain_begin and drain_end, so
we can just remove it there. It is still a valid optimisation for
drain_all in bdrv_drained_poll(), so leave it around there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-13-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We only need to call both the BlockDriver's callback and the parent
callbacks when going from undrained to drained or vice versa. A second
drain section doesn't make a difference for the driver or the parent,
they weren't supposed to send new requests before and after the second
drain.
One thing that gets in the way is the 'ignore_bds_parents' parameter in
bdrv_do_drained_begin_quiesce() and bdrv_do_drained_end(): It means that
bdrv_drain_all_begin() increases bs->quiesce_counter, but does not
quiesce the parent through BdrvChildClass callbacks. If an additional
drain section is started now, bs->quiesce_counter will be non-zero, but
we would still need to quiesce the parent through BdrvChildClass in
order to keep things consistent (and unquiesce it on the matching
bdrv_drained_end(), even though the counter would not reach 0 yet as
long as the bdrv_drain_all() section is still active).
Instead of keeping track of this, let's just get rid of the parameter.
It was introduced in commit 6cd5c9d7b2 as an optimisation so that
during bdrv_drain_all(), we wouldn't recursively drain all parents up to
the root for each node, resulting in quadratic complexity. As it happens,
calling the callbacks only once solves the same problem, so as of this
patch, we'll still have O(n) complexity and ignore_bds_parents is not
needed any more.
This patch only ignores the 'ignore_bds_parents' parameter. It will be
removed in a separate patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-12-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Subtree drains are not used any more. Remove them.
After this, BdrvChildClass.attach/detach() don't poll any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-11-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The subtree drain was introduced in commit b1e1af394d as a way to avoid
graph changes between finding the base node and changing the block graph
as necessary on completion of the image streaming job.
The block graph could change between these two points because
bdrv_set_backing_hd() first drains the parent node, which involved
polling and can do anything.
Subtree draining was an imperfect way to make this less likely (because
with it, fewer callbacks are called during this window). Everyone agreed
that it's not really the right solution, and it was only committed as a
stopgap solution.
This replaces the subtree drain with a solution that simply drains the
parent node before we try to find the base node, and then call a version
of bdrv_set_backing_hd() that doesn't drain, but just asserts that the
parent node is already drained.
This way, any graph changes caused by draining happen before we start
looking at the graph and things stay consistent between finding the base
node and changing the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-10-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drained_end_counter is unused now, nobody changes its value any more. It
can be removed.
In cases where we had two almost identical functions that only differed
in whether the caller passes drained_end_counter, or whether they would
poll for a local drained_end_counter to reach 0, these become a single
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221118174110.55183-5-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Polling during bdrv_drained_end() can be problematic (and in the future,
we may get cases for bdrv_drained_begin() where polling is forbidden,
and we don't care about already in-flight requests, but just want to
prevent new requests from arriving).
The .bdrv_drained_begin/end callbacks running in a coroutine is the only
reason why we have to do this polling, so make them non-coroutine
callbacks again. None of the callers actually yield any more.
This means that bdrv_drained_end() effectively doesn't poll any more,
even if AIO_WAIT_WHILE() loops are still there (their condition is false
from the beginning). This is generally not a problem, but in
test-bdrv-drain, some additional explicit aio_poll() calls need to be
added because the test case wants to verify the final state after BHs
have executed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot). For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.
Fixes: 15d0e7942d ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, s390x-pci performs accounting against the vfio DMA
limit and triggers the guest to clean up mappings when the limit
is reached. Let's go a step further and also limit the size of
the supported DMA aperture reported to the guest based upon the
initial vfio DMA limit reported for the container (if less than
than the size reported by the firmware/host zPCI layer). This
avoids processing sections of the guest DMA table during global
refresh that, for common use cases, will never be used anway, and
makes exhausting the vfio DMA limit due to mismatch between guest
aperture size and host limit far less likely and more indicitive
of an error.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Convert the TYPE_ARM_SMMUV3 device to 3-phase reset. The legacy
reset method doesn't do anything that's invalid in the hold phase, so
the conversion only requires changing it to a hold phase method, and
using the 3-phase versions of the "save the parent reset method and
chain to it" code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-3-peter.maydell@linaro.org
After the improvement to high memory region address assignment is
applied, the memory layout can be changed, introducing possible
migration breakage. For example, VIRT_HIGH_PCIE_MMIO memory region
is disabled or enabled when the optimization is applied or not, with
the following configuration. The configuration is only achievable by
modifying the source code until more properties are added to allow
users selectively disable those high memory regions.
pa_bits = 40;
vms->highmem_redists = false;
vms->highmem_ecam = false;
vms->highmem_mmio = true;
# qemu-system-aarch64 -accel kvm -cpu host \
-machine virt-7.2,compact-highmem={on, off} \
-m 4G,maxmem=511G -monitor stdio
Region compact-highmem=off compact-highmem=on
----------------------------------------------------------------
MEM [1GB 512GB] [1GB 512GB]
HIGH_GIC_REDISTS2 [512GB 512GB+64MB] [disabled]
HIGH_PCIE_ECAM [512GB+256MB 512GB+512MB] [disabled]
HIGH_PCIE_MMIO [disabled] [512GB 1TB]
In order to keep backwords compatibility, we need to disable the
optimization on machine, which is virt-7.1 or ealier than it. It
means the optimization is enabled by default from virt-7.2. Besides,
'compact-highmem' property is added so that the optimization can be
explicitly enabled or disabled on all machine types by users.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are three high memory regions, which are VIRT_HIGH_REDIST2,
VIRT_HIGH_PCIE_ECAM and VIRT_HIGH_PCIE_MMIO. Their base addresses
are floating on highest RAM address. However, they can be disabled
in several cases.
(1) One specific high memory region is likely to be disabled by
code by toggling vms->highmem_{redists, ecam, mmio}.
(2) VIRT_HIGH_PCIE_ECAM region is disabled on machine, which is
'virt-2.12' or ealier than it.
(3) VIRT_HIGH_PCIE_ECAM region is disabled when firmware is loaded
on 32-bits system.
(4) One specific high memory region is disabled when it breaks the
PA space limit.
The current implementation of virt_set_{memmap, high_memmap}() isn't
optimized because the high memory region's PA space is always reserved,
regardless of whatever the actual state in the corresponding
vms->highmem_{redists, ecam, mmio} flag. In the code, 'base' and
'vms->highest_gpa' are always increased for case (1), (2) and (3).
It's unnecessary since the assigned PA space for the disabled high
memory region won't be used afterwards.
Improve the address assignment for those three high memory region by
skipping the address assignment for one specific high memory region if
it has been disabled in case (1), (2) and (3). The memory layout may
be changed after the improvement is applied, which leads to potential
migration breakage. So 'vms->highmem_compact' is added to control if
the improvement should be applied. For now, 'vms->highmem_compact' is
set to false, meaning that we don't have memory layout change until it
becomes configurable through property 'compact-highmem' in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/misc.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221104160712.3005652-18-armbru@redhat.com>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-11-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This simplifies error checking.
Cc: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-7-armbru@redhat.com>
This reverts commit 14dccc8ea6.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY4nPggAKCRBAov/yOSY+
36cRA/9JFWuDT0TDhu0g1x0ktvpV+1GBPzkEXR2CVhDf2bly1ka2cLEtPUpiSE8E
Osw9cEBR3qX+LyO3gA0GySUr9jsc/yRqD38OL8HGZTCmZ/qCnHJSXvy+6a0LWYQq
ZIrFat7UjiTTeErkSQ6C4bUIl6YoUUSP0X2XxO6YF5j4uhGyqA==
=sVrx
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu into staging
pull for 7.2-rc4
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY4nPggAKCRBAov/yOSY+
# 36cRA/9JFWuDT0TDhu0g1x0ktvpV+1GBPzkEXR2CVhDf2bly1ka2cLEtPUpiSE8E
# Osw9cEBR3qX+LyO3gA0GySUr9jsc/yRqD38OL8HGZTCmZ/qCnHJSXvy+6a0LWYQq
# ZIrFat7UjiTTeErkSQ6C4bUIl6YoUUSP0X2XxO6YF5j4uhGyqA==
# =sVrx
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Dec 2022 05:12:18 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: Add cfi01 pflash device
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
=ZkaX
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: regression fix
Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
# 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
# icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
# Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
# eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
# Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
# =ZkaX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Dec 2022 02:37:05 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
include/hw: VM state takes precedence in virtio_device_should_start
hw/virtio: generalise CHR_EVENT_CLOSED handling
hw/virtio: add started_vu status field to vhost-user-gpio
vhost: enable vrings in vhost_dev_start() for vhost-user devices
tests/qtests: override "force-legacy" for gpio virtio-mmio tests
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The VM status should always preempt the device status for these
checks. This ensures the device is in the correct state when we
suspend the VM prior to migrations. This restores the checks to the
order they where in before the refactoring moved things around.
While we are at it lets improve our documentation of the various
fields involved and document the two functions.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Fixes: 259d69c00b (hw/virtio: introduce virtio_device_should_start)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-6-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the G_GNUC_PRINTF function attribute the compiler detects
two potential insecure format strings:
../../../net/stream.c:248:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
../../../net/stream.c:322:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
There are also two other warnings:
../../../net/socket.c:182:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
182 | qemu_set_info_str(&s->nc, "");
| ^~
../../../net/stream.c:170:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
170 | qemu_set_info_str(&s->nc, "");
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-7-sw@weilnetz.de>
Trying to run U-Boot for Cubieboard (Allwinner A10) fails because it cannot
access SD card. The problem is that FIFO register in current
allwinner-sdhost implementation is at the address corresponding to
Allwinner H3, but not A10.
Linux kernel is not affected since Linux driver uses DMA access and does
not use FIFO register for reading/writing.
This patch adds new class parameter `is_sun4i` and based on that
parameter uses register at offset 0x100 either as FIFO register (if
sun4i) or as threshold register (if not sun4i; in this case register at
0x200 is FIFO register).
Tested with U-Boot and Linux kernel image built for Cubieboard and
OrangePi PC.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221112214900.24152-1-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we already have bitmap_mutex to protect either the dirty bitmap or
the clear log bitmap, we don't need atomic operations to set/clear/test on
the clear log bitmap. Switching all ops from atomic to non-atomic
versions, meanwhile touch up the comments to show which lock is in charge.
Introduced non-atomic version of bitmap_test_and_clear_atomic(), mostly the
same as the atomic version but simplified a few places, e.g. dropped the
"old_bits" variable, and also the explicit memory barriers.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Those typos are in files which are used to generate the QEMU manual.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Run shell script:
cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \
512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \
user,id=net0 -qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xc000
outl 0xcf8 0x80000804
outl 0xcfc 0x01
outl 0xc00d 0x0200
outl 0xcf8 0x80000890
outb 0xcfc 0x4
outl 0xcf8 0x80000889
outl 0xcfc 0x1c000000
outl 0xcf8 0x80000893
outw 0xcfc 0x100
EOF
Got:
==68666== Invalid read of size 8
==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820)
==68666== by 0x6EBFBF: flatview_write (physmem.c:2862)
==68666== by 0x6EF5E7: address_space_write (physmem.c:2958)
==68666== by 0x6DFDEC: cpu_outw (ioport.c:70)
==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480)
==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client"
That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309
Here, the queue_index is the index of the cvq, but in some cases cvq
does not have the corresponding NetClientState, so overflow appears.
I add a check here, ignore illegal queue_index and cvq queue_index.
Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal
than cvq index could hit this. Other devices are similar.
Fixes: 7f863302 ("virtio-net: support queue_enable")
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi-vga-stub.c pulls in vga_int.h
However that currently pulls in ui/console.h which
breaks e.g. on systems without pixman.
It's better to remove ui/console.h from vga_int.h
and directly include it where it's used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221109222112.74519-1-mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reported-by: Frederic Bezies <fredbezies@gmail.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Fixes: cfead31326 ("AcpiDevAmlIf interface to build VGA device descs")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We want to use bdrv_child_get_parent_aio_context() from
bdrv_parent_drained_{begin,end}_single(), both of which are "I/O or GS"
functions.
Prior to 3ed4f708fe, all the implementations were I/O code anyway.
3ed4f708fe has put block jobs' AioContext field under the job mutex, so
to make child_job_get_parent_aio_context() work in an I/O context, we
need to take that lock there.
Furthermore, blk_root_get_parent_aio_context() is not marked as
anything, but is safe to run in an I/O context, so mark it that way now.
(blk_get_aio_context() is an I/O code function.)
With that done, all implementations explicitly are I/O code, so we can
mark bdrv_child_get_parent_aio_context() as I/O code, too, so callers
know it is safe to run from both GS and I/O contexts.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221107151321.211175-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous fix to virtio_device_started revealed a problem in its
use by both the core and the device code. The core code should be able
to handle the device "starting" while the VM isn't running to handle
the restoration of migration state. To solve this duel use introduce a
new helper for use by the vhost-user backends who all use it to feed a
should_start variable.
We can also pick up a change vhost_user_blk_set_status while we are at
it which follows the same pattern.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
In order to use the increased number of cpus, we need to bring smbios
tables in line with the SMBIOS 3.0 specification. This allows us to
introduce core_count2 which acts as a duplicate of core_count if we have
fewer cores than 256, and contains the actual core number per socket if
we have more.
core_enabled2 and thread_count2 fields work the same way.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220731162141.178443-2-jusual@redhat.com>
Message-Id: <20221011111731.101412-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce ECAP_PASID via "x-pasid-mode". Based on the
existing support for scalable mode, we need to implement the following
missing parts:
1) tag VTDAddressSpace with PASID and support IOMMU/DMA translation
with PASID
2) tag IOTLB with PASID
3) PASID cache and its flush
4) PASID based IOTLB invalidation
For simplicity PASID cache is not implemented so we can simply
implement the PASID cache flush as a no and leave it to be implemented
in the future. For PASID based IOTLB invalidation, since we haven't
had L1 stage support, the PASID based IOTLB invalidation is not
implemented yet. For PASID based device IOTLB invalidation, it
requires the support for vhost so we forbid enabling device IOTLB when
PASID is enabled now. Those work could be done in the future.
Note that though PASID based IOMMU translation is ready but no device
can issue PASID DMA right now. In this case, PCI_NO_PASID is used as
PASID to identify the address without PASID. vtd_find_add_as() has
been extended to provision address space with PASID which could be
utilized by the future extension of PCI core to allow device model to
use PASID based DMA translation.
This feature would be useful for:
1) prototyping PASID support for devices like virtio
2) future vPASID work
3) future PRS and vSVA work
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We introduce VTDBus structure as an intermediate step for searching
the address space. This works well with SID based matching/lookup. But
when we want to support SID plus PASID based address space lookup,
this intermediate steps turns out to be a burden. So the patch simply
drops the VTDBus structure and use the PCIBus and devfn as the key for
the g_hash_table(). This simplifies the codes and the future PASID
extension.
To prevent being slower for past vtd_find_as_from_bus_num() callers, a
vtd_as cache indexed by the bus number is introduced to store the last
recent search result of a vtd_as belongs to a specific bus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
It will be used in followup commits to figure out if
device has it's own, device specific AML block.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This Data Object Exchange Mailbox allows software to query the
latency and bandwidth between ports on the switch. For now
only provide information on routes between the upstream port and
each downstream port (not p2p).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v8: Mostly to match the type 3 equivalent
- Move enum out of function and give it a more descriptive namespace.
Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Data Object Exchange implementation of CXL Coherent Device Attribute
Table (CDAT). This implementation is referring to "Coherent Device
Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute
Express Link Specification, Rev. 3.0, July. 2022"
This patch adds core support that will be shared by both
end-points and switch port emulation.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange
Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.
pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* bug fixes for -Wextra
* fix gdb XML for 32-bit x86
* improve error handling for module load
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNndPcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVVwf+Nfvx9aoDTo6vU4kHmCbh7+BTtcUA
qEkaccL4pfujwNfRl5gHHKtRhgT6py9OjfIX8pAck3jtc5r+5/niFn7CLcOP2G/C
xuyVKPx3ONCMKCLjWwg63I8/t4JZDEnYEzyddAfV7Xb5600aUJlrxScW751K5eYQ
CzHFAASdc00eSiWE2eFL4rV7dcj0NadHnJxfjUcguHX4Qlr1TmK/ihEGv6MMRo5S
9Ak/vLmRs+LsQJm2cXUu5QVQiDwp31xbv3AP9knB+irYxrsp4LSDxV8eKZwLehpW
I4A3gz2xKAprfzVJKZI3Dc/hJSRpoKoCjz+QoI1NeVbWjsnYZAwD+VMSew==
=Nroy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* bug fixes for Win32 event loop
* bug fixes for -Wextra
* fix gdb XML for 32-bit x86
* improve error handling for module load
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNndPcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVVwf+Nfvx9aoDTo6vU4kHmCbh7+BTtcUA
# qEkaccL4pfujwNfRl5gHHKtRhgT6py9OjfIX8pAck3jtc5r+5/niFn7CLcOP2G/C
# xuyVKPx3ONCMKCLjWwg63I8/t4JZDEnYEzyddAfV7Xb5600aUJlrxScW751K5eYQ
# CzHFAASdc00eSiWE2eFL4rV7dcj0NadHnJxfjUcguHX4Qlr1TmK/ihEGv6MMRo5S
# 9Ak/vLmRs+LsQJm2cXUu5QVQiDwp31xbv3AP9knB+irYxrsp4LSDxV8eKZwLehpW
# I4A3gz2xKAprfzVJKZI3Dc/hJSRpoKoCjz+QoI1NeVbWjsnYZAwD+VMSew==
# =Nroy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 06 Nov 2022 03:48:55 EST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
accel: abort if we fail to load the accelerator plugin
dmg: warn when opening dmg images containing blocks of unknown type
module: add Error arguments to module_load and module_load_qom
module: rename module_load_one to module_load
module: removed unused function argument "mayfail"
Add missing include statement for global xml_builtin
meson: avoid unused arguments of main() in compiler tests
Fix broken configure with -Wunused-parameter
gdb-xml: Fix size of EFER register on i386 architecture when debugged by GDB
util/aio-win32: Correct the event array size in aio_poll()
util/main-loop: Avoid adding the same HANDLE twice
util/main-loop: Fix maximum number of wait objects for win32
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The S390 CPU topology accepts the smp.threads argument while
in reality it does not effectively allow multthreading.
Let's keep this behavior for machines older than 7.2 and
refuse to use threads in newer machines until multithreading
is really exposed to the guest by the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-3-pmorel@linux.ibm.com>
[thuth: Small fixes to the commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mayfail is always passed as false for every invocation throughout the program.
It controls whether to printf or not to printf an error on
g_module_open failure.
Remove this unused argument.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929093035.4231-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the logic in qemu_add_wait_object() to avoid adding the same
HANDLE twice, as the behavior is undefined when passing an array
that contains same HANDLEs to WaitForMultipleObjects() API.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221019102015.2441622-2-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221030105944.311940-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add new items into LoongArch FDT, including rtc and uart info.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Load FDT table into dram memory space, and the addr is 2 MiB.
Since lowmem region starts from 0, FDT base address is located
at 2 MiB to avoid NULL pointer access.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
cryptodev: Added a new type of backend named lkcf-backend for
cryptodev. This backend upload asymmetric keys to linux kernel,
and let kernel do the accelerations if possible.
The lkcf stands for Linux Kernel Cryptography Framework.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-5-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
crypto: support export RSA private keys with PKCS#8 standard.
So that users can upload this private key to linux kernel.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-4-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virtio-crypto: Modify the current interface of virtio-crypto
device to support asynchronous mode.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-2-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The s390x EXecute instruction is a bit weird as we synthesis the
executed instruction from what we have stored in memory. This missed
the plugin instrumentation.
Work around this with a special helper to inform the rest of the
translator about the instruction so things stay consistent.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-26-alex.bennee@linaro.org>
Add a way to examine the unwind data without actually
restoring the data back into env.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The NVRAM_SIZE constant was defined but not used. Rename it to
MACIO_NVRAM_SIZE to match the device model and use it where appropriate.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <5b53c70438dfb46837af8a094e753706b06c4ec6.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the parts specific to and only used by macio out from the shared
mac.h into macio.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <ac570ce9dcbae169310503689053807b8b4b86bc.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Convert nanoMIPS disassembler from C++ to C (Milica Lazarevic)
- Consolidate VT82xx/PIIX south bridges (Bernhard Beschow)
- Remove unused MAX_IDE_BUS definition (Zoltan Balaton)
- Fix branch displacement for BEQZC/BNEZC (David Daney)
- Don't set link_up for Boston's xilinx-pcie (Jiaxun Yang)
- Use bootloader API to set BAR registers in Malta (Jiaxun Yang)
-----BEGIN PGP SIGNATURE-----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=EqI/
-----END PGP SIGNATURE-----
Merge tag 'mips-20221030' of https://github.com/philmd/qemu into staging
MIPS patches queue
- Convert nanoMIPS disassembler from C++ to C (Milica Lazarevic)
- Consolidate VT82xx/PIIX south bridges (Bernhard Beschow)
- Remove unused MAX_IDE_BUS definition (Zoltan Balaton)
- Fix branch displacement for BEQZC/BNEZC (David Daney)
- Don't set link_up for Boston's xilinx-pcie (Jiaxun Yang)
- Use bootloader API to set BAR registers in Malta (Jiaxun Yang)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmNfpO8ACgkQ4+MsLN6t
# wN76og/+LMuTYYRkhETZyw3v5sTAexU0kmXyf/xMZ8PLi37Al2ia3qxo70qTh34m
# P2bbpCC46xzLCVY4s/84pb1lgpANNJNMIHwUni9HL4cTPPR7muKqpUOTEVh6Ghcq
# Zb2+e7yTKpIgvwDcIQEzU74gDyCcJoAo4LcLRVtuXer6olQsYsmlUqr3gg+Oy5kI
# zuJxOxZRoAP4H/ausGPg8oves28S3fVsw9J1x5p7vlzGt1Kx/i1XilSuGXI3H/79
# 0tgofUYkyFQRjxPLlE9OeYVwAo8gLFWwnkw/AOjHSOgGUsj/7yJXORm0ng/vQOqS
# j5036BHxmhYyEVL8aJAc7fvb4/m6walsXJItThqJ/JXphdAXi17fCCn0Wf9jqGrr
# io4Gm5qZI1bO/1orTaQywZTCjSi3pcuM0NxLZ/Qf7CVoXvNcddpDrSlyD3ILz9cq
# XqyaKQJ3kLvWTpJ6kZknl3s4kGnnMZw+2lZlusrSjrI4QnXmgoGLiSTRPxny1qQ0
# NaqAnys0Skn0fJ002na3lJgo4mzxzN+zEzMHsbB+RZv9JB2lIwQBm+zXDFHhb9Zv
# H0UFowi5lhJUjIZ5+bl4wtT2XoM4HM1YxU66a0t4SktMnKvBPCVBLUSj74Qdl1K8
# 7e2SvWB2ovNgscwek/srk1TT+yf7a6CmAraATSm0Fm/kxT5xa/Y=
# =EqI/
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 06:35:27 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20221030' of https://github.com/philmd/qemu: (55 commits)
hw/mips/malta: Use bootloader helper to set BAR registers
hw/mips: Use bl_gen_kernel_jump to generate bootloaders
hw/mips/bootloader: Allow bl_gen_jump_kernel to optionally set register
hw/mips/boston: Don't set link_up for xilinx-pcie
hw/isa/piix4: Move pci_ide_create_devs() call to board code
hw/isa/piix4: Add missing initialization
hw/isa/Kconfig: Fix dependencies of piix4 southbridge
hw/mips/malta: Reuse dev variable
hw/isa/piix3: Remove unused include
hw/ide/piix: Introduce TYPE_ macros for PIIX IDE controllers
hw/isa/piix4: Rename wrongly named method
hw/isa/piix3: Prefer pci_address_space() over get_system_memory()
hw/isa/piix3: Modernize reset handling
hw/isa/piix3: Add size constraints to rcr_ops
hw/isa/piix3: Remove extra ';' outside of functions
hw/i386/pc: Create DMA controllers in south bridges
disas/mips: Fix branch displacement for BEQZC and BNEZC
disas/nanomips: Rename nanomips.cpp to nanomips.c
disas/nanomips: Remove argument passing by ref
disas/nanomips: Replace Cpp enums for C enums
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When one of the $sp/$a[0..3] register is already set, we might
want bl_gen_jump_kernel() to NOT set it again. Pass a boolean
argument for each register, to allow to optionally set them.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026191821.28167-2-philmd@linaro.org>
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221022150508.26830-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The PM controller has activity bits which monitor activity of other
built-in devices in the host device.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Establishes consistency with other (VIA) devices.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This queue has the second part of the ppc4xx_sdram cleanups, doorbell
instructions for POWER8, new pflash handling for the e500 machine and a
Radix MMU regression fix.
It also has a lot of performance optimizations in the PowerPC emulation
done by the researchers of the Eldorado institute. Between using gvec
for VMX/VSX instructions, a full rework of the interrupt model and PMU
optimizations, they managed to drastically speed up the emulation of
powernv8/9/10 machines. Here's an example with avocado tests:
- with master:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (38.89 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (43.89 s)
- with this queue applied:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (21.23 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (22.58 s)
Other ppc machines, like pseries, also had a noticeable performance
boost.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY10J/gAKCRA82cqW3gMx
ZAbjAPwKNbE1wE2POJbMALBQAM5MewwLMV/UKGjE6jA7HAbb/AEA9e3o11FoUmSJ
rZkmTvMzBQZ81mMGRlS0cnqbrr4ADgc=
=gnKY
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221029' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-10-29:
This queue has the second part of the ppc4xx_sdram cleanups, doorbell
instructions for POWER8, new pflash handling for the e500 machine and a
Radix MMU regression fix.
It also has a lot of performance optimizations in the PowerPC emulation
done by the researchers of the Eldorado institute. Between using gvec
for VMX/VSX instructions, a full rework of the interrupt model and PMU
optimizations, they managed to drastically speed up the emulation of
powernv8/9/10 machines. Here's an example with avocado tests:
- with master:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (38.89 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (43.89 s)
- with this queue applied:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (21.23 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (22.58 s)
Other ppc machines, like pseries, also had a noticeable performance
boost.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY10J/gAKCRA82cqW3gMx
# ZAbjAPwKNbE1wE2POJbMALBQAM5MewwLMV/UKGjE6jA7HAbb/AEA9e3o11FoUmSJ
# rZkmTvMzBQZ81mMGRlS0cnqbrr4ADgc=
# =gnKY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Oct 2022 07:09:50 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221029' of https://gitlab.com/danielhb/qemu: (63 commits)
target/ppc: Fix regression in Radix MMU
hw/ppc/e500: Implement pflash handling
hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*
hw/sd/sdhci-internal: Unexport ESDHC defines
hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two
docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s)
target/ppc: Increment PMC5 with inline insns
target/ppc: Add new PMC HFLAGS
ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks()
ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling
ppc4xx_sdram: Generalise bank setup
ppc4xx_sdram: Rename local state variable for brevity
ppc4xx_sdram: Use hwaddr for memory bank size
ppc4xx_sdram: Move ppc4xx_sdram_banks() to ppc4xx_sdram.c
ppc4xx_devs.c: Move DDR SDRAM controller model to ppc4xx_sdram.c
ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c
target/ppc: move the p*_interrupt_powersave methods to excp_helper.c
target/ppc: unify cpu->has_work based on cs->interrupt_request
target/ppc: introduce ppc_maybe_interrupt
target/ppc: remove ppc_store_lpcr from CONFIG_USER_ONLY builds
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
-----BEGIN PGP SIGNATURE-----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=h0Ep
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu into staging
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds support for asynchronously tearing down a VM on Linux.
When qemu terminates, either naturally or because of a fatal signal,
the VM is torn down. If the VM is huge, it can take a considerable
amount of time for it to be cleaned up. In case of a protected VM, it
might take even longer than a non-protected VM (this is the case on
s390x, for example).
Some users might want to shut down a VM and restart it immediately,
without having to wait. This is especially true if management
infrastructure like libvirt is used.
This patch implements a simple trick on Linux to allow qemu to return
immediately, with the teardown of the VM being performed
asynchronously.
If the new commandline option -async-teardown is used, a new process is
spawned from qemu at startup, using the clone syscall, in such way that
it will share its address space with qemu.The new process will have the
name "cleanup/<QEMU_PID>". It will wait until qemu terminates
completely, and then it will exit itself.
This allows qemu to terminate quickly, without having to wait for the
whole address space to be torn down. The cleanup process will exit
after qemu, so it will be the last user of the address space, and
therefore it will take care of the actual teardown. The cleanup
process will share the same cgroups as qemu, so both memory usage and
cpu time will be accounted properly.
If possible, close_range will be used in the cleanup process to close
all open file descriptors. If it is not available or if it fails, /proc
will be used to determine which file descriptors to close.
If the cleanup process is forcefully killed with SIGKILL before the
main qemu process has terminated completely, the mechanism is defeated
and the teardown will not be asynchronous.
This feature can already be used with libvirt by adding the following
to the XML domain definition to pass the parameter to qemu directly:
<commandline xmlns="http://libvirt.org/schemas/domain/qemu/1.0">
<arg value='-async-teardown'/>
</commandline>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Tested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220812133453.82671-1-imbrenda@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is only used by the ppc4xx memory controller models so
it can be made static.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <b1504a82157a586aa284e8ee3b427b9a07b24169.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Socket communication in the libqtest and libqmp codes uses read()
and write() which work on any file descriptor on *nix, and sockets
in *nix are an example of a file descriptor.
However sockets on Windows do not use *nix-style file descriptors,
so read() and write() cannot be used on sockets on Windows.
Switch over to use send() and recv() instead which work on both
Windows and *nix.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-3-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently signal SIGIPI [=SIGUSR1] is used to kick the dummy CPU
when qtest accelerator is used. However SIGUSR1 is unsupported on
Windows. To support Windows, we add a QemuSemaphore CPUState::sem
to kick the dummy CPU instead for Windows.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-2-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rename SocketAddress_to_str() to socket_uri() and move it to
util/qemu-sockets.c close to socket_parse().
socket_uri() generates a string from a SocketAddress while
socket_parse() generates a SocketAddress from a string.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Embed the setting of info_str in a function.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As qemu_opts_parse_noisily() flattens the QAPI structures ("type" field
of Netdev structure can collides with "type" field of SocketAddress),
we introduce a way to bypass qemu_opts_parse_noisily() and use directly
visit_type_Netdev() to parse the backend parameters.
More details from Markus:
qemu_init() passes the argument of -netdev, -nic, and -net to
net_client_parse().
net_client_parse() parses with qemu_opts_parse_noisily(), passing
QemuOptsList qemu_netdev_opts for -netdev, qemu_nic_opts for -nic, and
qemu_net_opts for -net. Their desc[] are all empty, which means any
keys are accepted. The result of the parse (a QemuOpts) is stored in
the QemuOptsList.
Note that QemuOpts is flat by design. In some places, we layer non-flat
on top using dotted keys convention, but not here.
net_init_clients() iterates over the stored QemuOpts, and passes them to
net_init_netdev(), net_param_nic(), or net_init_client(), respectively.
These functions pass the QemuOpts to net_client_init(). They also do
other things with the QemuOpts, which we can ignore here.
net_client_init() uses the opts visitor to convert the (flat) QemOpts to
a (non-flat) QAPI object Netdev. Netdev is also the argument of QMP
command netdev_add.
The opts visitor was an early attempt to support QAPI in
(QemuOpts-based) CLI. It restricts QAPI types to a certain shape; see
commit eb7ee2cbeb "qapi: introduce OptsVisitor".
A more modern way to support QAPI is qobject_input_visitor_new_str().
It uses keyval_parse() instead of QemuOpts for KEY=VALUE,... syntax, and
it also supports JSON syntax. The former isn't quite as expressive as
JSON, but it's a lot closer than QemuOpts + opts visitor.
This commit paves the way to use of the modern way instead.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
All net_client_parse() callers exit in case of error.
Move exit(1) to net_client_parse() and remove error checking from
the callers.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The only caller passes &error_fatal, so use this directly in the function.
It's what we do for -blockdev, -device, and -object.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The functions are marked coroutine_fn in the definition.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-7-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The functions are marked coroutine_fn in the definition.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hmp_block_resize and hmp_screendump are defined as a ".coroutine = true" command,
so they must be coroutine_fn.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-4-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-11-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional changes intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Together with all _can_set_ and _set_ APIs, as they are not needed
anymore.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Minor performance improvement, but given that we have hash tables
available, avoid iterating in the visited nodes list every time just
to check if a node has been already visited.
The data structure is not actually a proper hash map, but an hash set,
as we are just adding nodes and not key,value pairs.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simplify the way the aiocontext can be changed in a BDS graph.
There are currently two problems in bdrv_try_set_aio_context:
- There is a confusion of AioContext locks taken and released, because
we assume that old aiocontext is always taken and new one is
taken inside.
- It doesn't look very safe to call bdrv_drained_begin while some
nodes have already switched to the new aiocontext and others haven't.
This could be especially dangerous because bdrv_drained_begin polls, so
something else could be executed while graph is in an inconsistent
state.
Additional minor nitpick: can_set and set_ callbacks both traverse the
graph, both using the ignored list of visited nodes in a different way.
Therefore, get rid of all of this and introduce a new callback,
change_aio_context, that uses transactions to efficiently, cleanly
and most importantly safely change the aiocontext of a graph.
This new callback is a "merge" of the two previous ones:
- Just like can_set_aio_context, recursively traverses the graph.
Marks all nodes that are visited using a GList, and checks if
they *could* change the aio_context.
- For each node that passes the above check, drain it and add a new transaction
that implements a callback that effectively changes the aiocontext.
- Once done, the recursive function returns if *all* nodes can change
the AioContext. If so, commit the above transactions.
Regardless of the outcome, call transaction.clean() to undo all drains
done in the recursion.
- The transaction list is scanned only after all nodes are being drained, so
we are sure that they all are in the same context, and then
we switch their AioContext, concluding the drain only after all nodes
switched to the new AioContext. In this way we make sure that
bdrv_drained_begin() is always called under the old AioContext, and
bdrv_drained_end() under the new one.
- Because of the above, we don't need to release and re-acquire the
old AioContext every time, as everything is done once (and not
per-node drain and aiocontext change).
Note that the "change" API is not yet invoked anywhere.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221025084952.2139888-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->file and bs->backing are a kind of duplication of part of
bs->children. But very useful diplication, so let's not drop them at
all:)
We should manage bs->file and bs->backing in same place, where we
manage bs->children, to keep them in sync.
Moreover, generic io paths are unprepared to BdrvChild without a bs, so
it's double good to clear bs->file / bs->backing when we detach the
child.
Detach is simple: if we detach bs->file or bs->backing child, just
set corresponding field to NULL.
Attach is a bit more complicated. But we still can precisely detect
should we set one of bs->file / bs->backing or not:
- if role is BDRV_CHILD_COW, we definitely deal with bs->backing
- else, if role is BDRV_CHILD_FILTERED (it must be also
BDRV_CHILD_PRIMARY), it's a filtered child. Use
bs->drv->filtered_child_is_backing to chose the pointer field to
modify.
- else, if role is BDRV_CHILD_PRIMARY, we deal with bs->file
- in all other cases, it's neither bs->backing nor bs->file. It's some
other child and we shouldn't care
OK. This change brings one more good thing: we can (and should) get rid
of all indirect pointers in the block-graph-change transactions:
bdrv_attach_child_common() stores BdrvChild** into transaction to clear
it on abort.
bdrv_attach_child_common() has two callers: bdrv_attach_child_noperm()
just pass-through this feature, bdrv_root_attach_child() doesn't need
the feature.
Look at bdrv_attach_child_noperm() callers:
- bdrv_attach_child() doesn't need the feature
- bdrv_set_file_or_backing_noperm() uses the feature to manage
bs->file and bs->backing, we don't want it anymore
- bdrv_append() uses the feature to manage bs->backing, again we
don't want it anymore
So, we should drop this stuff! Great!
We could probably keep BdrvChild** argument to keep the int return
value, but it seems not worth the complexity.
Finally, we now set .file / .backing automatically in generic code and
want to restring setting them by hand outside of .attach/.detach.
So, this patch cleanups all remaining places where they were set.
To find such places I use:
git grep '\->file ='
git grep '\->backing ='
git grep '&.*\<backing\>'
git grep '&.*\<file\>'
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-14-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the informal rules formal. In further commit we'll add
corresponding assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-8-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pass_through is used as filter, even all node variables has
corresponding names. We want to append it, so it should be
backing-child-based filter like mirror_top.
So, in test_update_perm_tree, first child should be DATA, as we don't
want filters with two filtered children.
bdrv_exclusive_writer is used as a filter once. So it should be filter
anyway. We want to append it, so it should be backing-child-based
fitler too.
Make all FILTERED children to be PRIMARY as well. We are going to force
this rule by assertion soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-7-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all drivers call bdrv_open_child() similarly. Let's create a
helper for this.
The only not updated drivers that call bdrv_open_child() to set
bs->file are raw-format and snapshot-access:
raw-format sometimes want to have filtered child but
don't set drv->is_filter to true.
snapshot-access wants only DATA | PRIMARY
Possibly we should implement drv->is_filter_func() handler, to consider
raw-format as filter when it works as filter.. But it's another story.
Note also, that we decrease assignments to bs->file in code: it helps
us restrict modifying this field in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unfortunately not all filters use .file child as filtered child. Two
exclusions are mirror_top and commit_top. Happily they both are private
filters. Bad thing is that this inconsistency is observable through qmp
commands query-block / query-named-block-nodes. So, could we just
change mirror_top and commit_top to use file child as all other filter
driver is an open question. Probably, we could do that with some kind
of deprecation period, but how to warn users during it?
For now, let's just add a field so we can distinguish them in generic
code, it will be used in further commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-2-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At present there are two callers of get_tmp_filename() and they are
inconsistent.
One does:
/* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
char *tmp_filename = g_malloc0(PATH_MAX + 1);
...
ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
while the other does:
s->qcow_filename = g_malloc(PATH_MAX);
ret = get_tmp_filename(s->qcow_filename, PATH_MAX);
As we can see different 'size' arguments are passed. There are also
platform specific implementations inside the function, and the use
of snprintf is really undesirable.
The function name is also misleading. It creates a temporary file,
not just a filename.
Refactor this routine by changing its name and signature to:
char *create_tmp_file(Error **errp)
and use g_get_tmp_dir() / g_mkstemp() for a consistent implementation.
While we are here, add some comments to mention that /var/tmp is
preferred over /tmp on non-win32 hosts.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221010040432.3380478-2-bin.meng@windriver.com>
[kwolf: Fixed incorrect errno negation and iotest 051]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the system reboots, the rng-seed that the FDT has should be
re-randomized, so that the new boot gets a new seed. Several
architectures require this functionality, so export a function for
injecting a new seed into the given FDT.
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221025004327.568476-3-Jason@zx2c4.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's allow for specifying a thread context via the "prealloc-context"
property. When set, preallcoation threads will be crated via the
thread context -- inheriting the same CPU affinity as the thread
context.
Pinning preallcoation threads to CPUs can heavily increase performance
in NUMA setups, because, preallocation from a CPU close to the target
NUMA node(s) is faster then preallocation from a CPU further remote,
simply because of memory bandwidth for initializing memory with zeroes.
This is especially relevant for very large VMs backed by huge/gigantic
pages, whereby preallocation is mandatory.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-7-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
... and implement it under POSIX. When a ThreadContext is provided,
create new threads via the context such that these new threads obtain a
properly configured CPU affinity.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-6-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Setting the CPU affinity of QEMU threads is a bit problematic, because
QEMU doesn't always have permissions to set the CPU affinity itself,
for example, with seccomp after initialized by QEMU:
-sandbox enable=on,resourcecontrol=deny
General information about CPU affinities can be found in the man page of
taskset:
CPU affinity is a scheduler property that "bonds" a process to a given
set of CPUs on the system. The Linux scheduler will honor the given CPU
affinity and the process will not run on any other CPUs.
While upper layers are already aware of how to handle CPU affinities for
long-lived threads like iothreads or vcpu threads, especially short-lived
threads, as used for memory-backend preallocation, are more involved to
handle. These threads are created on demand and upper layers are not even
able to identify and configure them.
Introduce the concept of a ThreadContext, that is essentially a thread
used for creating new threads. All threads created via that context
thread inherit the configured CPU affinity. Consequently, it's
sufficient to create a ThreadContext and configure it once, and have all
threads created via that ThreadContext inherit the same CPU affinity.
The CPU affinity of a ThreadContext can be configured two ways:
(1) Obtaining the thread id via the "thread-id" property and setting the
CPU affinity manually (e.g., via taskset).
(2) Setting the "cpu-affinity" property and letting QEMU try set the
CPU affinity itself. This will fail if QEMU doesn't have permissions
to do so anymore after seccomp was initialized.
A simple QEMU example to set the CPU affinity to host CPU 0,1,6,7 would be:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,cpu-affinity=0-1,cpu-affinity=6-7
And we can query it via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
0,
1,
6,
7
]
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
In general, the interface behaves like pthread_setaffinity_np(): host
CPU numbers that are currently not available are ignored; only host CPU
numbers that are impossible with the current kernel will fail. If the
list of host CPU numbers does not include a single CPU that is
available, setting the CPU affinity will fail.
A ThreadContext can be reused, simply by reconfiguring the CPU affinity.
Note that the CPU affinity of previously created threads will not get
adjusted.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-4-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Usually, we let upper layers handle CPU pinning, because
pthread_setaffinity_np() (-> sched_setaffinity()) is blocked via
seccomp when starting QEMU with
-sandbox enable=on,resourcecontrol=deny
However, we want to configure and observe the CPU affinity of threads
from QEMU directly in some cases when the sandbox option is either not
enabled or not active yet.
So let's add a way to configure CPU pinning via
qemu_thread_set_affinity() and obtain CPU affinity via
qemu_thread_get_affinity() and implement them under POSIX using
pthread_setaffinity_np() + pthread_getaffinity_np().
Implementation under Windows is possible using SetProcessAffinityMask()
+ GetProcessAffinityMask(), however, that is left as future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-3-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's
* give the function a "qemu_*" style name
* make sure the parameters in the implementation match the prototype
* rename smp_cpus to max_threads, which makes the semantics of that
parameter clearer
... and add a function documentation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-2-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Register guest RAM using BlockRAMRegistrar and set the
BDRV_REQ_REGISTERED_BUF flag so block drivers can optimize memory
accesses in I/O requests.
This is for vdpa-blk, vhost-user-blk, and other I/O interfaces that rely
on DMA mapping/unmapping.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-14-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a function to get the file descriptor for a RAMBlock. Device
emulation code typically uses the MemoryRegion APIs but vhost-style code
may use RAMBlock directly for sharing guest memory with another process.
This new API will be used by the libblkio block driver so it can share
guest memory via .bdrv_register_buf().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-11-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Emulated devices and other BlockBackend users wishing to take advantage
of blk_register_buf() all have the same repetitive job: register
RAMBlocks with the BlockBackend using RAMBlockNotifier.
Add a BlockRAMRegistrar API to do this. A later commit will use this
from hw/block/virtio-blk.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Registering an I/O buffer is only a performance optimization hint but it
is still necessary to return errors when it fails.
Later patches will need to detect errors when registering buffers but an
immediate advantage is that error_report() calls are no longer needed in
block driver .bdrv_register_buf() functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block drivers may optimize I/O requests accessing buffers previously
registered with bdrv_register_buf(). Checking whether all elements of a
request's QEMUIOVector are within previously registered buffers is
expensive, so we need a hint from the user to avoid costly checks.
Add a BDRV_REQ_REGISTERED_BUF request flag to indicate that all
QEMUIOVector elements in an I/O request are known to be within
previously registered buffers.
Always pass the flag through to driver read/write functions. There is
little harm in passing the flag to a driver that does not use it.
Passing the flag to drivers avoids changes across many block drivers.
Filter drivers would need to explicitly support the flag and pass
through to their children when the children support it. That's a lot of
code changes and it's hard to remember to do that everywhere, leading to
silent reduced performance when the flag is accidentally dropped.
The only problematic scenario with the approach in this patch is when a
driver passes the flag through to internal I/O requests that don't use
the same I/O buffer. In that case the hint may be set when it should
actually be clear. This is a rare case though so the risk is low.
Some drivers have assert(!flags), which no longer works when
BDRV_REQ_REGISTERED_BUF is passed in. These assertions aren't very
useful anyway since the functions are called almost exclusively by
bdrv_driver_preadv/pwritev() so if we get flags handling right there
then the assertion is not needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the enum type so GDB displays the enum members instead of printing a
numeric constant.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only implementor of bdrv_register_buf() is block/nvme.c, where the
size is not needed when unregistering a buffer. This is because
util/vfio-helpers.c can look up mappings by address.
Future block drivers that implement bdrv_register_buf() may not be able
to do their job given only the buffer address. Add a size argument to
bdrv_unregister_buf().
Also document the assumptions about
bdrv_register_buf()/bdrv_unregister_buf() calls. The same <host, size>
values that were given to bdrv_register_buf() must be given to
bdrv_unregister_buf().
gcc 11.2.1 emits a spurious warning that img_bench()'s buf_size local
variable might be uninitialized, so it's necessary to silence the
compiler.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a coroutine wakes up it may determine that it must re-queue.
Normally coroutines are pushed onto the back of the CoQueue, but for
fairness it may be necessary to push it onto the front of the CoQueue.
Add a flag to specify that the coroutine should be pushed onto the front
of the CoQueue. A later patch will use this to ensure fairness in the
bounce buffer CoQueue used by the blkio BlockDriver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
-----BEGIN PGP SIGNATURE-----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=u7pS
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
Let's add a few bits of code which hide the new KVM PV dump API from
us via new functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
[ Marc-André: fix up for compilation issue ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-10-frankja@linux.ibm.com>
Adding two s390x note types
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-9-frankja@linux.ibm.com>
Introduce an interface over which we can get information about UV data.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-8-frankja@linux.ibm.com>
All targets have been updated. Use the tcg_ops target hook
exclusively, which allows the compat code to be removed.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We missed this function when we introduced tb_page_addr_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is is never called with a real range,
only for a single page. Drop the second parameter
and rename to tb_invalidate_phys_page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This data structure will be replaced for user-only: add accessors.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no users outside of accel/tcg; this function
does not need to be defined in exec-all.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use qatomic_*, which expands to __atomic_* in preference
to the "legacy" __sync_* functions.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change from QEMU_BUILD_BUG_ON, which requires ifdefs to avoid
problematic code, to qemu_build_assert, which can use C ifs.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This differs from assert, in that with optimization enabled it
triggers at build-time. It differs from QEMU_BUILD_BUG_ON,
aka _Static_assert, in that it is sensitive to control flow
and is subject to dead-code elimination.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add hooks which architectures can use to add arbitrary data to custom
sections.
Also add a section name string table in order to identify section
contents
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017113210.41674-1-frankja@linux.ibm.com>
Let's move ELF related members into one block and guest memory related
ones into another to improve readability.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-4-frankja@linux.ibm.com>
Currently we're writing the NULL section header if we overflow the
physical header number in the ELF header. But in the future we'll add
custom section headers AND section data.
To facilitate this we need to rearange section handling a bit. As with
the other ELF headers we split the code into a prepare and a write
step.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-2-frankja@linux.ibm.com>
Store a reference on the AspeedSMC class under the flash object and
use it when accessing the flash contents. Avoiding the class cast
checkers in these hot paths improves performance by 10% when running
the aspeed avocado tests.
Message-Id: <20220923084803.498337-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Investigating why some BMC models are so slow compared to a plain ARM
virt machines I did some profiling of:
./qemu-system-arm -M romulus-bmc -nic user \
-drive
file=obmc-phosphor-image-romulus.static.mtd,format=raw,if=mtd \
-nographic -serial mon:stdio
And saw that object_class_dynamic_cast_assert was dominating the
profile times. We have a number of cases in this model of the SSI bus.
As the class is static once the object is created we just cache it and
use it instead of the dynamic case macros.
Profiling against:
./tests/venv/bin/avocado run \
tests/avocado/machine_aspeed.py:test_arm_ast2500_romulus_openbmc_v2_9_0
Before: 35.565 s ± 0.087 s
After: 15.713 s ± 0.287 s
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220811151413.3350684-6-alex.bennee@linaro.org>
Message-Id: <20220923084803.498337-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I think when Klaus ported his slave mode changes from the original patch
series to the rewritten I2C module, he changed the behavior of the first
byte that is received by the slave device.
What's supposed to happen is that the AspeedI2CBus's slave device's
i2c_event callback should run, and if the event is "send_async", then it
should populate the byte buffer with the 8-bit I2C address that is being
sent to. Since we only support "send_async", the lowest bit should
always be 0 (indicating that the master is requesting to send data).
This is the code Klaus had previously, for reference. [1]
switch (event) {
case I2C_START_SEND:
bus->buf = bus->dev_addr << 1;
bus->buf &= I2CD_BYTE_BUF_RX_MASK;
bus->buf <<= I2CD_BYTE_BUF_RX_SHIFT;
bus->intr_status |= (I2CD_INTR_SLAVE_ADDR_RX_MATCH | I2CD_INTR_RX_DONE);
aspeed_i2c_set_state(bus, I2CD_STXD);
break;
[1]: https://lore.kernel.org/qemu-devel/20220331165737.1073520-4-its@irrelevant.dk/
Fixes: a8d48f59cd ("hw/i2c/aspeed: add slave device in old register mode")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220820225712.713209-2-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In commit 1454509726 we removed the function
scsi_legacy_handle_cmdline() and all of its callers, but forgot to
delete the prototype from the header function. Delete the prototype
too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221013130500.967432-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Following a change on the kernel side (see link), pass BI_RNG_SEED
instead of BI_VIRT_RNG_SEED. This should have no impact on
compatibility, as there will simply be no effect if it's an old kernel,
which is how things have always been. We then use this as an opportunity
to add this to q800, since now we can, which is a nice improvement.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/lkml/20220923170340.4099226-3-Jason@zx2c4.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220926113900.1256630-1-Jason@zx2c4.com>
[lv: s/^I/ /g]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
These are used by both the SDRAM controller model and system DCRs. In
preparation to move SDRAM controller in its own file move these macros
to the ppc4xx.h header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <74d9bf4891e2ccceb52bb6ca6b54fd3f37a9fb04.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc440_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr2. This is mostly
modelling the DDR2 SDRAM controller found in the 460EX (used on the
sam460ex board). Newer SoCs (regardless of their PPC core, e.g. 405EX)
may have this controller but we only emulate enough of it for the
sam460ex u-boot firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3e82ae575c7c41e464a0082d55ecb4ebcc4d4329.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename functions to avoid name clashes when moving the DDR2 controller
model currently called ppc440_sdram to ppc4xx_devs. This also more
clearly shows which function belongs to which model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <9c09d10fbf36940ebbe30d7038d69cf3f2e58371.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc4xx_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly
modelling the DDR SDRAM controller found in the 440EP (used on the
bamboo board) but also backward compatible with the older DDR
controllers on some 405 SoCs so we also use it for those now. This
likely does not cause problems for guests we run as the new features
are just not accessed but to model 405 SoC accurately some features
may have to be disabled or the model split between 440 and older.
Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an
updated DDR2 SDRAM controller implemented by the ppc440_sdram model
(only partially, enough for the 460EX on the sam460ex) that is not yet
QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2
when QOM'ified later.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of checking if memory size is valid in board code move this
check to ppc4xx_sdram_init() as this is a restriction imposed by the
SDRAM controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <39e5129dd095b285676a6267c5753786da1bc30d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change ppc4xx_sdram_banks() to take one Ppc4xxSdramBank array instead
of the separate arrays and adjust ppc4xx_sdram_init() and
ppc440_sdram_init() accordingly as well as machines using these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <e3a1fea51f29779fd6a61be90a29c684f3299544.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The do_init parameter of ppc4xx_sdram_init() is used to map memory
regions that is normally done by the firmware by programming the SDRAM
controller. Do this from board code emulating what firmware would do
when booting a kernel directly from -kernel without a firmware so we
can get rid of this do_init hack.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of storing sdram bank parameters in unrelated arrays put them
in a struct so it's clear they belong to the same bank and simplify
the state struct using this bank type.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5eb82d0424c584b2b9e6f7bc51560f8189ed21bb.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the `rw1c` functionality to the respective
registers. The status fields are cleared when the respective
field is set.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220930033241.206581-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Section 5.6.6.3 of VirtIO specification states, "Events will also
be reported via sense codes..." However, no sense data is sent when
VIRTIO_SCSI_EVT_RESET_RESCAN or VIRTIO_SCSI_EVT_RESET_REMOVED events
are reported (when disk hotplug/hotunplug events occur). SCSI layer
on Solaris depends on this sense data, and hence does not handle disk
hotplug/hotunplug events.
When the disk inventory changes, use the bus unit attention mechanism
to return a CHECK_CONDITION status with sense data of 0x06/0x3F/0x0E
(sense code REPORTED_LUNS_CHANGED). The first device on the bus to
execute a command successfully will report and consume the unit
attention status.
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <20221006194946.24134-1-venu.busireddy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.
Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>
Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.
As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>
While being at it add a #define for the magic 0x1040 number.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
Expose struct KVMState out of kvm-all.c so that the field of struct
KVMState can be accessed when defining target-specific accelerator
properties.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220929072014.20705-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they
should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm, for
now no such property is defined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929072014.20705-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PATCH v1: add support for SMBIOS type 8 to qemu
PATCH v2: incorporate patch v1 feedback and add smbios type=8 to qemu-options
internal_reference: internal reference designator
external_reference: external reference designator
connector_type: hex value for port connector type (see SMBIOS 7.9.2)
port_type: hex value for port type (see SMBIOS 7.9.3)
After studying various vendor implementationsi (Dell, Lenovo, MSI),
the value of internal connector type was hard-coded to 0x0 (None).
Example usage:
-smbios type=8,internal_reference=JUSB1,external_reference=USB1,connector_type=0x12,port_type=0x10 \
-smbios type=8,internal_reference=JAUD1,external_reference="Audio Jack",connector_type=0x1f,port_type=0x1d \
-smbios type=8,internal_reference=LAN,external_reference=Ethernet,connector_type=0x0b,port_type=0x1f \
-smbios type=8,internal_reference=PS2,external_reference=Mouse,connector_type=0x0f,port_type=0x0e \
-smbios type=8,internal_reference=PS2,external_reference=Keyboard,connector_type=0x0f,port_type=0x0d
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Message-Id: <20220812135153.17859-1-hal.martin@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity complains that in functions like pci_set_word_by_mask()
we might end up shifting by more than 31 bits. This is true,
but only if the caller passes in a zero mask. Help Coverity out
by asserting that the mask argument is valid.
Fixes: CID 1487168
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220818135421.2515257-3-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The helper functions pci_get_{byte,word,long,quad}_by_mask()
were added in 2012 in commit c9f50cea70. In the decade
since we have never added a single use of them.
The helpers clearly aren't that helpful, so drop them
rather than carrying around dead code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220818135421.2515257-2-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements the HMP versions of the virtio QMP commands.
[Jonah: Adjusted hmp monitor output format for features / statuses
with their descriptions.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-7-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Display feature names instead of bitmaps for host, guest, and
backend for VirtIODevices.
Display status names instead of bitmaps for VirtIODevices.
Display feature names instead of bitmaps for backend, protocol,
acked, and features (hdev->features) for vhost devices.
Decode features according to device ID. Decode statuses
according to configuration status bitmap (config_status_map).
Decode vhost user protocol features according to vhost user
protocol bitmap (vhost_user_protocol_map).
Transport features are on the first line. Undecoded bits (if
any) are stored in a separate field.
[Jonah: Several changes made to this patch from prev. version (v14):
- Moved all device features mappings to hw/virtio/virtio.c
- Renamed device features mappings (less generic)
- Generalized @FEATURE_ENTRY macro for all device mappings
- Virtio device feature map definitions include descriptions of
feature bits
- Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport
feature map to vhost-user-supported device feature mappings
(blk, fs, i2c, rng, net, gpu, input, scsi, vsock)
- New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET
- New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG
- New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
- New virtio transport feature bit added: @VIRTIO_F_IN_ORDER
- Added device feature map definition for virtio-rng
]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3
provides a standard way to provide a device serial number as
an IEEE defined 64-bit extended unique identifier EUI-64.
CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities requires this to be used to uniquely
identify CXL memory devices.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220923161835.9805-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Widawsky <bwidawsk@kernel.org>
No reason to have this be a separate field. This also makes it more akin
to what the virtio-blk device does.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can reuse it for other virtio-blk devices, e.g
vhost-user-blk, which currently does not control its config space size
dynamically.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-gpio device which connects
to the remote daemon. It is based of vhost-user-i2c code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org>
[AJB: fixes for qtest, tweaks to feature bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
All the boilerplate virtio code does the same thing (or should at
least) of checking to see if the VM is running before attempting to
start VirtIO. Push the logic up to the common function to avoid
getting a copy and paste wrong.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Try and explicitly document the various state of feature bits as
related to the vhost_dev structure. Importantly the backend_features
can advertise things like VHOST_USER_F_PROTOCOL_FEATURES which is
never exposed to the driver and is only present in the vhost-user
feature negotiation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When debugging a new vhost user you may be surprised to see
VHOST_USER_F_PROTOCOL getting squashed in the maze of
backend_features, acked_features and guest_features. Expand the
description here to help the next poor soul trying to work through
this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These public functions are not used anywhere, thus can be dropped.
Also, since this is the final job API that doesn't use AioContext
lock and replaces it with job_lock, adjust all remaining function
documentation to clearly specify if the job lock is taken or not.
Also document the locking requirements for a few functions
where the second version is not removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-22-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These public functions are not used anywhere, thus can be dropped.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the job_{lock/unlock} and macros to use job_mutex.
Now that they are not nop anymore, remove the aiocontext
to avoid deadlocks.
Therefore:
- when possible, remove completely the aiocontext lock/unlock pair
- if it is used by some other function too, reduce the locking
section as much as possible, leaving the job API outside.
- change AIO_WAIT_WHILE in AIO_WAIT_WHILE_UNLOCKED, since we
are not using the aiocontext lock anymore
The only functions that still need the aiocontext lock are:
- the JobDriver callbacks, already documented in job.h
- job_cancel_sync() in replication.c is called with aio_context_lock
taken, but now job is using AIO_WAIT_WHILE_UNLOCKED so we need to
release the lock.
Reduce the locking section to only cover the callback invocation
and document the functions that take the AioContext lock,
to avoid taking it twice.
Also remove real_job_{lock/unlock}, as they are replaced by the
public functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-19-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some callbacks implementation use bdrv_* APIs that assume the
AioContext lock is held. Make sure this invariant is documented.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-18-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The same job lock is being used also to protect some of blockjob fields.
Categorize them just as done in job.h.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-15-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to make it thread safe, implement a "fake rwlock",
where we allow reads under BQL *or* job_mutex held, but
writes only under BQL *and* job_mutex.
The only write we have is in child_job_set_aio_ctx, which always
happens under drain (so the job is paused).
For this reason, introduce job_set_aio_context and make sure that
the context is set under BQL, job_mutex and drain.
Also make sure all other places where the aiocontext is read
are protected.
The reads in commit.c and mirror.c are actually safe, because always
done under BQL.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-14-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just as done with job.h, create _locked() functions in blockjob.h
These functions will be later useful when caller has already taken
the lock. All blockjob _locked functions call job _locked functions.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With "intact" we mean that all job.h functions implicitly
take the lock. Therefore API callers are unmodified.
This means that:
- many static functions that will be always called with job lock held
become _locked, and call _locked functions
- all public functions take the lock internally if needed, and call _locked
functions
- all public functions called internally by other functions in job.c will have a
_locked counterpart (sometimes public), to avoid deadlocks (job lock already taken).
These functions are not used for now.
- some public functions called only from exernal files (not job.c) do not
have _locked() counterpart and take the lock inside. Others won't need
the lock at all because use fields only set at initialization and
never modified.
job_{lock/unlock} is independent from real_job_{lock/unlock}.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same as AIO_WAIT_WHILE macro, but if we are in the Main loop
do not release and then acquire ctx_ 's aiocontext.
Once all Aiocontext locks go away, this macro will replace
AIO_WAIT_WHILE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
job_event_* functions can all be static, as they are not used
outside job.c.
Same applies for job_txn_add_job().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Categorize the fields in struct Job to understand which ones
need to be protected by the job mutex and which don't.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
job mutex will be used to protect the job struct elements and list,
replacing AioContext locks.
Right now use a shared lock for all jobs, in order to keep things
simple. Once the AioContext lock is gone, we can introduce per-job
locks.
To simplify the switch from aiocontext to job lock, introduce
*nop* lock/unlock functions and macros.
We want to always call job_lock/unlock outside the AioContext locks,
and not vice-versa, otherwise we might get a deadlock. This is not
straightforward to do, and that's why we start with nop functions.
Once everything is protected by job_lock/unlock, we can change the nop into
an actual mutex and remove the aiocontext lock.
Since job_mutex is already being used, add static
real_job_{lock/unlock} for the existing usage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-22-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_get_aio_context inspects a coroutine, but it does
not have to be called from the coroutine itself (or from any
coroutine).
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd_co_establish_connection_cancel() cancels a coroutine but is not called
from coroutine context itself, for example in nbd_cancel_in_flight()
and in timer callbacks reconnect_delay_timer_cb() and open_timer_cb().
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-5-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_self() can be called from outside coroutine context,
returning the leader coroutine, and several such invocations currently
exist (mostly in qcow2 tracing calls).
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20221005175209.975797-1-afaria@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While the DumpState begin and length variables directly mirror the API
variable names they are not very descriptive. So let's add a
"filter_area_" prefix and make has_filter a function checking length > 0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-6-frankja@linux.ibm.com>
get_start_block() returns the start address of the first memory block
or -1.
With the GuestPhysBlock iterator conversion we don't need to set the
start address and can therefore remove that code and the "start"
DumpState struct member. The only functionality left is the validation
of the start block so it only makes sense to re-name the function to
validate_start_block()
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220811121111.9878-5-frankja@linux.ibm.com>
It's always better to convey the type of a pointer if at all
possible. So let's add the DumpState typedef to typedefs.h and move
the dump note functions from the opaque pointers to DumpState
pointers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Cédric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Alistair Francis <alistair.francis@wdc.com>
CC: Bin Meng <bin.meng@windriver.com>
CC: Cornelia Huck <cohuck@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Richard Henderson <richard.henderson@linaro.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-2-frankja@linux.ibm.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:
monitor_printf(mon, "%s", s->str);
It will be useful in following patches but for now convert all
existing plain "%s" printfs to use the _puts api.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
Prepare for targets to be able to produce TBs that can
run in more than one virtual context.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap the bare TranslationBlock pointer into a structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the pc coming from db->pc_first rather than the TB.
Use the cached host_addr rather than re-computing for the
first page. We still need a separate lookup for the second
page because it won't be computed for DisasContextBase until
the translator actually performs a read from the page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the target to cache items from the guest page tables.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have collected all of the page data into
CPUTLBEntryFull, provide an interface to record that
all in one go, instead of using 4 arguments. This interface
allows CPUTLBEntryFull to be extended without having to
change the number of arguments.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add an interface to return the CPUTLBEntryFull struct
that goes with the lookup. The result is not intended
to be valid across multiple lookups, so the user must
use the results immediately.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field is only written, not read; remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This structure will shortly contain more than just
data for accessing MMIO. Rename the 'addr' member
to 'xlat_section' to more clearly indicate its purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The class cast checkers are quite expensive and always on (unlike the
dynamic case who's checks are gated by CONFIG_QOM_CAST_DEBUG). To
avoid the overhead of repeatedly checking something which should never
change we cache the CPUClass reference for use in the hot code paths.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220811151413.3350684-3-alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220923084803.498337-3-clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fix missing block_acct_setup() with -blockdev
- Keep auto_backing_file post-migration
- file-posix: Fixed O_DIRECT memory alignment
- ide: Fix state after EXECUTE DEVICE DIAGNOSTIC and implement
INITIALIZE DEVICE PARAMETERS
- qemu-img: Wean documentation and help output off '?' for help
- qcow2: fix memory leak and compiler warning
- Code cleanups
-----BEGIN PGP SIGNATURE-----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=IIJz
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of git://repo.or.cz/qemu/kevin into staging
Block layer patches
- Fix missing block_acct_setup() with -blockdev
- Keep auto_backing_file post-migration
- file-posix: Fixed O_DIRECT memory alignment
- ide: Fix state after EXECUTE DEVICE DIAGNOSTIC and implement
INITIALIZE DEVICE PARAMETERS
- qemu-img: Wean documentation and help output off '?' for help
- qcow2: fix memory leak and compiler warning
- Code cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmM3Hm4RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZhqA//WGN9tlx3Pf1D6SG3PtIG6/2DOJ6/gVNw
# R17BwoGTw36Nmt9xDzrHih753dcguLS19Kd6EySTg6j8mPogmFszquORMgGmcYcW
# 0KtneRR7Y9XsamIGgentek1zsWajsP5muvZQF+hFJyZ24MZtWB+5Ucw2VuUTWnRl
# YaKP/tGMP5sC8nK3Npste/o7yh9Wgv4cv/mdKuyKoxjZhELeTTpHoTC2IZK9bV5I
# Bh19zjPRUPodm37nzONruUVzn53xKK3Qn26ZT5Hgx39HOdccPEu9N8wawQyqLr/x
# 2whcn8kFfpFBLLxVbMYjwcWNo41SCn1itRcgV38PilBvG2UInUFK2QCmVgYxWluB
# 9I5sRasfD3/BPPmw3n+j2TRJ+uvrLkkwXqIhAg+mAeiS0MccWUnLhJLW2S1Yai5L
# nkjkLmuV7KCLQTY39WvKBq0TPgj3QR0WJtEYHuUDtduvzKxAWd47Ff1tEPvFm5Ys
# RpmLSUQdPZiOkiwnV1qVg6a3gbIjUcT0Pai/Knc3iYrwCWLdNSCGoPkVemOg5wvN
# GxsQcKnfayQqIdZU6lBQehUjPamm3ffAEELeqLQXCbZe9lsbhNBXLJjVnA3cOu3f
# 1PX6w+4MNeTg5ZekUJGS1fnYlq9CDOWGSv37+csB8dBhi6vQTc6YjABWU1IrB0S5
# 1ihOYtc8fOo=
# =IIJz
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 30 Sep 2022 12:50:54 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of git://repo.or.cz/qemu/kevin:
hw/ide/core.c: Implement ATA INITIALIZE_DEVICE_PARAMETERS command
tests/qtest/ide-test: Verify that DIAGNOSTIC clears DEV to zero
hw/ide/core: Clear LBA and drive bits for EXECUTE DEVICE DIAGNOSTIC
tests/qtest/ide-test.c: Create disk image for use as a secondary
piix_ide_reset: Use pci_set_* functions instead of direct access
block: use the request length for iov alignment
block: move bdrv_qiov_is_aligned to file-posix
iotests/backing-file-invalidation: Add new test
block/qed: Keep auto_backing_file if possible
block/qcow2: Keep auto_backing_file if possible
gluster: stop using .bdrv_needs_filename
block: make serializing requests functions 'void'
block: use bdrv_is_sg() helper instead of raw bs->sg reading
block: add missed block_acct_setup with new block device init procedure
block: pass OnOffAuto instead of bool to block_acct_setup()
qemu-img: Wean documentation and help output off '?' for help
block/qcow2-bitmap: Add missing cast to silent GCC error
qcow2: fix memory leak in qcow2_read_extensions
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix breakage of icount mode when guest touches MDCR_EL3, MDCR_EL2,
PMCNTENSET_EL0 or PMCNTENCLR_EL0
* Make writes to MDCR_EL3 use PMU start/finish calls
* Let AArch32 write to SDCR.SCCD
* Rearrange cpu64.c so all the CPU initfns are together
* hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
* hw/arm/virt: fix some minor issues with generated device tree
* Fix regression where EL3 could not write to SP_EL1 if there is no EL2
-----BEGIN PGP SIGNATURE-----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=edYy
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220930' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix breakage of icount mode when guest touches MDCR_EL3, MDCR_EL2,
PMCNTENSET_EL0 or PMCNTENCLR_EL0
* Make writes to MDCR_EL3 use PMU start/finish calls
* Let AArch32 write to SDCR.SCCD
* Rearrange cpu64.c so all the CPU initfns are together
* hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
* hw/arm/virt: fix some minor issues with generated device tree
* Fix regression where EL3 could not write to SP_EL1 if there is no EL2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmM28EYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3mw9D/44e72KHZdfr3F/Cmd0Jku2
# g5NQ4ooKV90rY4Y4+/VR9Z2k7a72lWFgFl7/54AKXSZsZSmNomeh2WxWJAs1lA2W
# 4rmGPlLwxZYMQumYcMOArYxJQgRK5exVtE6ECKM/JERjhKSbnL1lyLWGUyLtFJfq
# SjxoTWEigPHu+0fX/nk04rFzrA6Bo1qKQqZZTuN9zcT6JXyQMjZNF89Fxy9OlV4s
# dlOXsZILV8oREnGdDFPYLgwSTMn+1rrD8xfjK/DTQrlUVX/9zhlIeKg5O4JadxCy
# 8ThIFCyODUanlRvyjHiwvcvStHn8wwyCp4uJrxmZGyyp4t4u3etG0hpsZaPtiN9O
# NKtad4Aoc6lSmIDhYYZA1LIIdSIeyUPD/LyWTd+qKK7A7mxH6ORr0uyjhb01jWs3
# ceyne1i0n66oRLbHxPyjQEkLqwLl2CsqWr41BNM5RVoYjCU8HYSvEwlh7t+EZCL5
# IRkfAWJkA9bdXL30ZmYSzJ7hfvVkWhDsHD+eOzAcsxoApgzI5Mfi7gCIZ+LNY20P
# W0akGbA6l0InsmIcBpyXEztPOi6tOD/J55qeOCrzHjgfhoJWCoa/mS8bVqN0mKIA
# yJ7QbiK/JY6+G1v2oM8aARLn8/C7oLnMYiKntXNBMj67Ry5GwjDt+A37MUHgQbZb
# yUzUjr3O2N1qJRKi+Dd7eA==
# =edYy
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 30 Sep 2022 09:33:58 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20220930' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: mark SP_EL1 with ARM_CP_EL3_NO_EL2_KEEP
hw/arm/virt: Fix devicetree warning about the SMMU node
hw/arm/virt: Use "msi-map" devicetree property for PCI
hw/arm/virt: Fix devicetree warning about the GIC node
hw/arm/virt: Fix devicetree warning about the root node
hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
target/arm: Rearrange cpu64.c so all the CPU initfns are together
target/arm: Update SDCR_VALID_MASK to include SCCD
target/arm: Make writes to MDCR_EL3 use PMU start/finish calls
target/arm: Mark registers which call pmu_op_start() as ARM_CP_IO
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CHS-based disk utilities and operating systems may adjust the logical
geometry of a hard drive to cope with the expectations or limitations
of software using the ATA INITIALIZE_DEVICE_PARAMETERS command.
Prior to this patch, INITIALIZE_DEVICE_PARAMETERS was a nop that
always returned success, raising the possibility of data loss or
corruption if the CHS<->LBA translation redirected a write to the
wrong sector.
* hw/ide/core.c
ide_reset():
Reset the logical CHS geometry of the hard disk when the power-on
defaults feature is enabled.
cmd_specify():
a) New function implementing INITIALIZE_DEVICE_PARAMETERS.
b) Ignore calls for empty or ATAPI devices.
cmd_set_features():
Implement the power-on defaults enable and disable features.
struct ide_cmd_table:
Switch WIN_SPECIFY from cmd_nop() to cmd_specify().
ide_init_drive():
Set new fields 'drive_heads' and 'drive_sectors' based upon the
actual disk geometry.
* include/hw/ide/internal.h
struct IDEState:
a) Store the actual drive CHS values within the new fields
'drive_heads' and 'drive_sectors.'
b) Track whether a soft IDE reset should also reset the logical CHS
geometry of the hard disk within the new field 'reset_reverts'.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-7-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is only user of bdrv_qiov_is_aligned(), so move the alignment
function to there and make it static.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-2-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Return codes of the following functions are never used in the code:
* bdrv_wait_serialising_requests_locked
* bdrv_wait_serialising_requests
* bdrv_make_request_serialising
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Ronnie Sahlberg <ronniesahlberg@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220817083736.40981-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5f76a7aac1 is looking harmless from
the first glance, but it has changed things a lot. 'libvirt' uses it to
detect that it should follow new initialization way and this changes
things considerably. With this procedure followed, blockdev_init() is
not called anymore and thus block_acct_setup() helper is not called.
This means in particular that defaults for block accounting statistics
are changed and account_invalid/account_failed are actually initialized
as false instead of true originally.
This commit changes things to match original world. There are the following
constraints:
* new default value in block_acct_init() is set to true
* block_acct_setup() inside blockdev_init() is called before
blkconf_apply_backend_options()
* thus newly created option in block device properties has precedence if
specified
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We would have one more place for block_acct_setup() calling, which should
not corrupt original value.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-2-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Connect ZynqMP's USB controllers.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_socketpair() will create a pair of connected sockets
with FD_CLOEXEC set
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <17fa1eff729eeabd9a001f4639abccb127ceec81.1661240709.git.tugy@chinatelecom.cn>
Make source buffers const for char be write functions.
This allows using buffers returned by fifo as buf parameter and source buffer
should not be changed by write functions anyway.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-3-arwed.meyer@gmx.de>
This was deprecated in 6.2 and is ready to go. It removes quite a bit
of code that handled the registration of watchdog models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If setup_data is being read into a specific memory location, then
generally the setup_data address parameter is read first, so that the
caller knows where to read it into. In that case, we should return
setup_data containing the absolute addresses that are hard coded and
determined a priori. This is the case when kernels are loaded by BIOS,
for example. In contrast, when setup_data is read as a file, then we
shouldn't modify setup_data, since the absolute address will be wrong by
definition. This is the case when OVMF loads the image.
This allows setup_data to be used like normal, without crashing when EFI
tries to use it.
(As a small development note, strangely, fw_cfg_add_file_callback() was
exported but fw_cfg_add_bytes_callback() wasn't, so this makes that
consistent.)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a follow-up for commit 892a4f6a75 ("linux-user: Add partial
support for MADV_DONTNEED"), which added passthrough for anonymous
mappings. File mappings can be handled in a similar manner.
In order to do that, mark pages, for which mmap() was passed through,
with PAGE_PASSTHROUGH, and then allow madvise() passthrough for these
pages. Drop the explicit PAGE_ANON check, since anonymous mappings are
expected to have PAGE_PASSTHROUGH anyway.
Add PAGE_PASSTHROUGH to PAGE_STICKY in order to keep it on mprotect().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725125043.43048-1-iii@linux.ibm.com>
Message-Id: <20220906000839.1672934-5-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add handler for fatal errors. Moves device into error state where it
stops responding until the guest resets it.
Guest can send illegal requests where scsi command and usb packet
transfer directions are inconsistent. Use the new usb_msd_fatal_error()
function instead of assert() in that case.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220830063827.813053-3-kraxel@redhat.com>
SiFiveEState inherits from SysBusDevice while it's TypeInfo claims it to
inherit from TYPE_MACHINE. This is an inconsistency which can cause
undefined behavior such as memory corruption.
Change SiFiveEState to inherit from MachineState since it is registered
as a machine.
Fixes: 0869490b1c ("riscv: sifive_e: Manually define the machine")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220922075232.33653-1-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On the OpenTitan hardware the resetvec is fixed at the start of ROM. In
QEMU we don't run the ROM code and instead just jump to the next stage.
This means we need to be a little more flexible about what the resetvec
is.
This patch allows us to set the resetvec from the command line with
something like this:
-global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400
This way as the next stage changes we can update the resetvec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This work is based on:
https://patchew.org/QEMU/20220317125534.38706-1-philippe.mathieu.daude@gmail.com/
Simplify the initialization dance by running qemu_init() in the main
thread before the Cocoa event loop starts. The secondary thread only
runs only qemu_main_loop() and qemu_cleanup().
This fixes a case where addRemovableDevicesMenuItems() calls
qmp_query_block() while expecting the main thread to still hold
the BQL.
Overriding the code after calling qemu_init() is done by dynamically
replacing a function pointer variable, qemu_main when initializing
ui/cocoa, which unifies the static implementation of main() for
builds with ui/cocoa and ones without ui/cocoa.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220819132756.74641-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Define a QEMU special key constant for the tab key and add an entry for
it in the qcode_to_keysym table. This allows tab completion to work again
in the SDL monitor virtual console, which has been broken ever since the
migration from SDL1 to SDL2.
Signed-off-by: Cal Peake <cp@absolutedigital.net>
Message-Id: <7054816e-99c-7e2-6737-7cf98cc56e2@absolutedigital.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
=qT+H
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-09-20:
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
hw/ppc/spapr: Fix code style problems reported by checkpatch
hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
target/ppc: Clear fpstatus flags on helpers missing it
target/ppc: Zero second doubleword of VSR registers for FPR insns
target/ppc: Set OV32 when OV is set
target/ppc: Zero second doubleword for VSX madd instructions
target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
target/ppc: Zero second doubleword in DFP instructions
target/ppc: Remove unused xer_* macros
target/ppc: Remove extra space from s128 field in ppc_vsr_t
target/ppc: Merge fsqrt and fsqrts helpers
target/ppc: Move fsqrts to decodetree
target/ppc: Move fsqrt to decodetree
target/ppc: Implement hashstp and hashchkp
target/ppc: Implement hashst and hashchk
target/ppc: Add HASHKEYR and HASHPKEYR SPRs
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cleanup the previous pci information in acpi dsdt table.
And using the common acpi_dsdt_add_gpex function to build
the gpex and pci information.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-10-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add platform bus support and add the bus information such as address,
size, irq number to FDT table.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)
Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently our semihosting implementations generally prohibit use of
semihosting calls in system emulation from the guest userspace. This
is a very long standing behaviour justified originally "to provide
some semblance of security" (since code with access to the
semihosting ABI can do things like read and write arbitrary files on
the host system). However, it is sometimes useful to be able to run
trusted guest code which performs semihosting calls from guest
userspace, notably for test code. Add a command line suboption to
the existing semihosting-config option group so that you can
explicitly opt in to semihosting from guest userspace with
-semihosting-config userspace=on
(There is no equivalent option for the user-mode emulator, because
there by definition all code runs in userspace and has access to
semihosting already.)
This commit adds the infrastructure for the command line option and
adds a bool 'is_user' parameter to the function
semihosting_userspace_enabled() that target code can use to check
whether it should be permitting the semihosting call for userspace.
It mechanically makes all the callsites pass 'false', so they
continue checking "is semihosting enabled in general". Subsequent
commits will make each target that implements semihosting honour the
userspace=on option by passing the correct value and removing
whatever "don't do this for userspace" checking they were doing by
hand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822141230.3658237-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only user can easily use translator_lduw and
adjust the type to signed during the return.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a function that checks whether a given address is on the same
page as where disassembly started. Having it improves readability of
the following patches.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220811095534.241224-3-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Make the DisasContextBase parameter const.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Map the stack executable if required by default or on demand.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new property "big-endian" to allow configuring the RTC as either
little or big endian, the default is little endian.
Currently overriding the default to big endian is only used by the m68k
virt platform. New platforms should prefer to use little endian and not
set this.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These will be shared with the virt platform.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Version: GnuPG v1
iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
=eMUT
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
# KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
# Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
# JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
# ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
# wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
# =eMUT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Sep 2022 02:30:35 EDT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (21 commits)
net: tulip: Restrict DMA engine to memories
net/colo.c: Fix the pointer issue reported by Coverity.
vdpa: Delete CVQ migration blocker
vdpa: Add virtio-net mac address via CVQ at start
vhost_net: add NetClientState->load() callback
vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
vdpa: Move command buffers map to start of net device
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vhost_net: Add NetClientInfo stop callback
vhost_net: Add NetClientInfo start callback
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost: Delete useless read memory barrier
vhost: use SVQ element ndescs instead of opaque data for desc validation
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring
vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd
vdpa: Make SVQ vring unmapping return void
vdpa: Remove SVQ vring from iova_tree at shutdown
util: accept iova_tree_remove_parameter by value
vdpa: do not save failed dma maps in SVQ iova tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support for the unix socket has existed both in BSD and Linux for the
longest time, but not on Windows. Since Windows 10 build 17063 [1],
the native support for the unix socket has come to Windows. Starting
this build, two Win32 processes can use the AF_UNIX address family
over Winsock API to communicate with each other.
[1] https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220802075200.907360-3-bmeng.cn@gmail.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows per-net client operations right after device's successful
start. In particular, to load the device status.
Vhost-vdpa net will use it to add the CVQ buffers to restore the device
status.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Used by the backend to perform actions after the device is stopped.
In particular, vdpa net use it to unmap CVQ buffers to the device,
cleaning the actions performed in prepare().
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is used by the backend to perform actions before the device is
started.
In particular, vdpa net use it to map CVQ buffers to the device, so it
can send control commands using them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
=0uL/
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-08-31:
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
# ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
# YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
# =0uL/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Aug 2022 16:09:58 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu: (60 commits)
ppc4xx: Fix code style problems reported by checkpatch
ppc/ppc4xx: Fix sdram trace events
hw/ppc/Kconfig: Move imply before select
hw/ppc/sam460ex: Remove PPC405 dependency from sam460ex
ppc405: Move machine specific code to ppc405_boards.c
ppc/ppc405: QOM'ify FPGA
ppc/ppc405: Use an explicit I2C object
hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
ppc/ppc405: Use an embedded PPCUIC model in SoC state
ppc4xx: Rename ppc405-ebc to ppc4xx-ebc
ppc4xx: Move EBC model to ppc4xx_devs.c
ppc4xx: Rename ppc405-plb to ppc4xx-plb
ppc4xx: Move PLB model to ppc4xx_devs.c
ppc/ppc405: QOM'ify MAL
ppc/ppc405: QOM'ify PLB
ppc/ppc405: QOM'ify POB
ppc/ppc405: QOM'ify OPBA
ppc/ppc405: QOM'ify EBC
ppc/ppc405: QOM'ify DMA
ppc/ppc405: QOM'ify GPIO
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make ppc-uic a subclass of ppc4xx-dcr-device which will handle the cpu
link and make it uniform with the other PPC4xx devices.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <eb548130cf60aea8a6ea4dba4dee1686b3cabc3d.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <63d9b14c8ff5f73e35bffca1036394b5235735ee.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The EBC is shared between 405 and 440 so move it to shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <10eae70509ca4bd74858fc2c0a0f0e4eb9330199.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b13ebfd12a71a28035bed5a915cbeee81cf21d1.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PLB is shared between 405 and 440 so move it to the shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2498384bf3e18959ee8cb984d72fb66b8a6ecadc.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Memory Access Layer (MAL) controller is currently modeled as a DCR
device with 4 IRQs. Also drop the ppc4xx_mal_init() helper and adapt
the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <d54a243dff94d95ba30dbcc09c27700a90ade932.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Device Control Registers (DCR) of on-SoC devices are accessed by
software through the use of the mtdcr and mfdcr instructions. These
are converted in transactions on a side band bus, the DCR bus, which
connects the on-SoC devices to the CPU.
Ideally, we should model these accesses with a DCR namespace and DCR
memory regions but today the DCR handlers are installed in a DCR table
under the CPU. Instead, introduce a little device model wrapper to hold
a CPU link and handle registration of DCR handlers.
The DCR device inherits from SysBus because most of these devices also
have MMIO regions and/or IRQs. Being a SysBusDevice makes things easier
to install the device model in the overall SoC.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Explicit opaque parameter for dcr callbacks]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9b21bdf55e0a728f093bad299e030d98f302ded0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Drop the use of ppc4xx_init() and duplicate a bit of code related to
clocks in the SoC realize routine. We will clean that up in the
following patches.
ppc_dcr_init() simply allocates default DCR handlers for the CPU. Maybe
this could be done in model initializer of the CPU families needing it.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-8-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When enabling user created PHBs (a change reverted by commit 9c10d86fee)
we were handling PHBs created by default versus by the user in different
manners. The only difference between these PHBs is that one will have a
valid phb3->chip that is assigned during pnv_chip_power8_realize(),
while the user created needs to search which chip it belongs to.
Aside from that there shouldn't be any difference. Making the default
PHBs behave in line with the user created ones will make it easier to
re-introduce them later on. It will also make the code easier to follow
since we are dealing with them in equal manner.
The first step is to turn chip8->phbs[] into a PnvPHB3 pointer array.
This will allow us to assign user created PHBs into it later on. The way
we initilize the default case is now more in line with that would happen
with the user created case: the object is created, parented by the chip
because pnv_xscom_dt() relies on it, and then assigned to the array.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-6-danielhb413@gmail.com>
pnv_parent_qom_fixup() and pnv_parent_bus_fixup() are versions of the
helpers that were reverted by commit 9c10d86fee "ppc/pnv: Remove
user-created PHB{3,4,5} devices". They are needed to amend the QOM and
bus hierarchies of user created pnv-phbs, matching them with default
pnv-phbs.
A new helper pnv_phb_user_device_init() is created to handle
user-created devices setup. We're going to call it inside
pnv_phb_realize() in case we're realizing an user created device. This
will centralize all user device realated in a single spot, leaving the
realize functions of the phb3/phb4 backends untouched.
Another helper called pnv_chip_add_phb() was added to handle the
particularities of each chip version when adding a new PHB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-5-danielhb413@gmail.com>
The same rationale provided in the PHB3 bus case applies here.
Note: we could have merged both buses in a single object, like we did
with the root ports, and spare some boilerplate. The reason we opted to
preserve both buses objects is twofold:
- there's not user side advantage in doing so. Unifying the root ports
presents a clear user QOL change when we enable user created devices back.
The buses objects, aside from having a different QOM name, is transparent
to the user;
- we leave a door opened in case we want to increase the root port limit
for phb4/5 later on without having to deal with phb3 code.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-3-danielhb413@gmail.com>
We rely on the phb-id and chip-id, which are PHB properties, to assign
chassis and slot to the root port. For default devices this is no big
deal: the root port is being created under pnv_phb_realize() and the
values are being passed on via the 'index' and 'chip-id' of the
pnv_phb_attach_root_port() helper.
If we want to implement user created root ports we have a problem. The
user created root port will not be aware of which PHB it belongs to,
unless we're willing to violate QOM best practices and access the PHB
via dev->parent_bus->parent. What we can do is to access the root bus
parent bus.
Since we're already assigning the root port as QOM child of the bus, and
the bus is initiated using PHB properties, let's add phb-id and chip-id
as properties of the bus. This will allow us trivial access to them, for
both user-created and default root ports, without doing anything too
shady with QOM.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-2-danielhb413@gmail.com>
The helper is only used in this file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-13-danielhb413@gmail.com>
The attribute is unused.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-11-danielhb413@gmail.com>
We support only a single root port, PNV_PHB_ROOT_PORT.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-10-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used instead. The phb4-root-port
device isn't exposed to the user in any official QEMU release so there's
no ABI breakage in removing it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-9-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used in its place. There is no ABI
breakage in doing so because no official QEMU release introduced user
creatable pnv-phb3-root-port devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-8-danielhb413@gmail.com>
Change the parent type of the PnvPHB4 device to TYPE_PARENT since the
PCI bus is going to be initialized by the PnvPHB parent. Functions that
needs to access the bus via a PnvPHB4 object can do so via the
phb4->phb_base pointer.
pnv_phb4_pec now creates a PnvPHB object.
The powernv9 machine class will create PnvPHB devices with version '4'.
powernv10 will create using version '5'. Both are using global machine
properties in their class_init() to do that.
These changes will benefit us when adding PnvPHB user creatable devices
for powernv9 and powernv10.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-6-danielhb413@gmail.com>
Similar to what we already did for the PnvPHB3 device, let's add a
helper to init the bus when using a PnvPHB4. This helper will be used by
PnvPHb when PnvPHB4 turns into a backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-5-danielhb413@gmail.com>
We need a handful of changes that needs to be done in a single swoop to
turn PnvPHB3 into a PnvPHB backend.
In the PnvPHB3, since the PnvPHB device implements PCIExpressHost and
will hold the PCI bus, change PnvPHB3 parent to TYPE_DEVICE. There are a
couple of instances in pnv_phb3.c that needs to access the PCI bus, so a
phb_base pointer is added to allow access to the parent PnvPHB. The
PnvPHB3 root port will now be connected to a PnvPHB object.
In pnv.c, the powernv8 machine chip8 will now hold an array of PnvPHB
objects. pnv_get_phb3_child() needs to be adapted to return the PnvPHB3
backend from the PnvPHB child. A global property is added in
pnv_machine_power8_class_init() to ensure that all PnvPHBs are created
with phb->version = 3.
After all these changes we're still able to boot a powernv8 machine with
default settings. The real gain will come with user created PnvPHB
devices, coming up next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-4-danielhb413@gmail.com>
The PnvPHB3 bus init consists of initializing the pci_io and pci_mmio
regions, registering it via pci_register_root_bus() and then setup the
iommu.
We'll want to init the bus from outside pnv_phb3.c when the bus is
removed from the PnvPHB3 device and put into a new parent PnvPHB device.
The new pnv_phb3_bus_init() helper will be used by the parent to init
the bus when using the PHB3 backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-2-danielhb413@gmail.com>
Added the possibility of recalculating a result if it overflows or
underflows, if the result overflow and the rebias bool is true then the
intermediate result should have 3/4 of the total range subtracted from
the exponent. The same for underflow but it should be added to the
exponent of the intermediate number instead.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220805141522.412864-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The SBE (Self Boot Engine) are on-chip microcontrollers that perform
early boot steps, as well as provide some runtime facilities (e.g.,
timer, secure register access, MPIPL). The latter facilities are
accessed mostly via a message system called SBEFIFO.
This driver provides initial emulation for the SBE runtime registers
and a very basic SBEFIFO implementation that provides the timer
command. This covers the basic SBE behaviour expected by skiboot when
booting.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220811093726.1442343-1-npiggin@gmail.com>
[danielhb: fixed SBE_HOST_RESPONSE_MASK long line]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The last user of this function has just been removed, so we can
drop this function now, too.
Message-Id: <20220810125720.3849835-4-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We currently require at least GCC 7.4 or Clang 6.0 for compiling QEMU.
GCC has __builtin_mul_overflow since version 5 already, and Clang 6.0
also provides this built-in function (see its documentation on this page:
https://releases.llvm.org/6.0.0/tools/clang/docs/LanguageExtensions.html ).
So we can simplify the #if statement here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220721074809.1513357-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If we go directly to GLOBAL_STATE_CODE, IO_CODE or IO_OR_GS_CODE
definition, we just find that they "mark and check that the function
is part of the {category} API".
However, ther is no definition on what {category} API is, they are
in include/block/block-*.h
Therefore, add a comment that refers to such documentation.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220609122206.1016936-1-eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Change macro name 'LS7A_XXX' to 'VIRT_XXX', as the loongarch
virt machinue use the GPEX bridge instead of LS7A bridge. So
the macro name should keep consistency.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently QEMU exits with code 0 on both panic an shutdown. For tests
it is useful to return 1 on panic, so that it counts as a test
failure.
Introduce a new exit-failure PanicAction that makes main() return
EXIT_FAILURE. Tests can use -action panic=exit-failure option to
activate this behavior.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220725223746.227063-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The added enforcing is only relevant in the case of AMD where the
range right before the 1TB is restricted and cannot be DMA mapped
by the kernel consequently leading to IOMMU INVALID_DEVICE_REQUEST
or possibly other kinds of IOMMU events in the AMD IOMMU.
Although, there's a case where it may make sense to disable the
IOVA relocation/validation when migrating from a
non-amd-1tb-aware qemu to one that supports it.
Relocating RAM regions to after the 1Tb hole has consequences for
guest ABI because we are changing the memory mapping, so make
sure that only new machine enforce but not older ones.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-12-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the pre-initialized pci-host qdev and fetch the
pci-hole64-size into pc_memory_init() newly added argument.
Use PCI_HOST_PROP_PCI_HOLE64_SIZE pci-host property for
fetching pci-hole64-size.
This is in preparation to determine that host-phys-bits are
enough and for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-4-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the start of pc_memory_init() we usually pass a range of
0..UINT64_MAX as pci_memory, when really its 2G (i440fx) or
32G (q35). To get the real user value, we need to get pci-host
passed property for default pci_hole64_size. Thus to get that,
create the qdev prior to memory init to better make estimations
on max used/phys addr.
This is in preparation to determine that host-phys-bits are
enough and also for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-3-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than hardcoding the 4G boundary everywhere, introduce a
X86MachineState field @above_4g_mem_start and use it
accordingly.
This is in preparation for relocating ram-above-4g to be
dynamically start at 1T on AMD platforms.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-2-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the interleave granularity is always small enough that this isn't
a real problem (much less than 4GiB) let's change the constant
to ULL to fix the coverity warning.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 829de299d1 ("hw/cxl/component: Add utils for interleave parameter encoding/decoding")
Fixes: Coverity CID 1488868
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-4-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This got left behind in the move of the CXL setup code from core
files to the machines that support it.
Link: 1ebf9001fb
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-2-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20220704085852.330005-1-robert.hu@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tiny machines optimized for fast boot time generally don't use EFI,
which means a random seed has to be supplied some other way. For this
purpose, Linux (≥5.20) supports passing a seed in the setup_data table
with SETUP_RNG_SEED, specially intended for hypervisors, kexec, and
specialized bootloaders. The linked commit shows the upstream kernel
implementation.
At Paolo's request, we don't pass these to versioned machine types ≤7.0.
Link: https://git.kernel.org/tip/tip/c/68b8e9713c8
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220721125636.446842-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This replaces yesterdays pull and:
a) Fixes some test build errors without TLS
b) Reenabled the zlib acceleration on s390
now that we have Ilya's fix
Hyman's dirty page rate limit set
Ilya's fix for zlib vs migration
Peter's postcopy-preempt
Cleanup from Dan
zero-copy tidy ups from Leo
multifd doc fix from Juan
Revert disable of zlib acceleration on s390x
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wiSA
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu into staging
Migration pull 2022-07-20
This replaces yesterdays pull and:
a) Fixes some test build errors without TLS
b) Reenabled the zlib acceleration on s390
now that we have Ilya's fix
Hyman's dirty page rate limit set
Ilya's fix for zlib vs migration
Peter's postcopy-preempt
Cleanup from Dan
zero-copy tidy ups from Leo
multifd doc fix from Juan
Revert disable of zlib acceleration on s390x
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 20 Jul 2022 12:18:56 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu: (30 commits)
Revert "gitlab: disable accelerated zlib for s390x"
migration: Avoid false-positive on non-supported scenarios for zero-copy-send
multifd: Document the locking of MultiFD{Send/Recv}Params
migration/multifd: Report to user when zerocopy not working
Add dirty-sync-missed-zero-copy migration stat
QIOChannelSocket: Fix zero-copy flush returning code 1 when nothing sent
migration: remove unreachable code after reading data
tests: Add postcopy preempt tests
tests: Add postcopy tls recovery migration test
tests: Add postcopy tls migration test
tests: Move MigrateCommon upper
migration: Respect postcopy request order in preemption mode
migration: Enable TLS for preempt channel
migration: Export tls-[creds|hostname|authz] params to cmdline too
migration: Add helpers to detect TLS capability
migration: Add property x-postcopy-preempt-break-huge
migration: Create the postcopy preempt channel asynchronously
migration: Postcopy recover with preempt enabled
migration: Postcopy preemption enablement
migration: Postcopy preemption preparation on channel creation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJi18PHAAoJEO8Ells5jWIRCEQH+wepXDoT6Q56xmUgxVs+hlAD
CXGy71/cNV08Yu3PTTXo8SYaw+KXxsA9ECgIr2hsfPXarAdoOpJFpZR0HoqIzaXd
kpD6bvwN8bEEOlAHxKcb6/VM+VYntZBfkH9m1WLGx3fHILazLblyL8w2Hkp7NK9J
IBpQQ63uU8Xt0+js96Z/sPOKRjrtbKXFT1bhY2CI8MKZpuqNyED0jZYwbNdnRwZN
fuKbpsaaT4Wxx+mQMg7H7a0e/xx3DNi2F6cAtGLH98WYzbLFgExSSK8G8jnwEVfM
EKWfU7N4zmokq7jN99yvGzjIzLrnLX6yn/ifSs+lQOzdtCA9zEbotI+CDCVdPs4=
=9zus
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# gpg: Signature made Wed 20 Jul 2022 09:58:47 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (25 commits)
net/colo.c: fix segmentation fault when packet is not parsed correctly
net/colo.c: No need to track conn_list for filter-rewriter
net/colo: Fix a "double free" crash to clear the conn_list
softmmu/runstate.c: add RunStateTransition support form COLO to PRELAUNCH
vdpa: Add x-svq to NetdevVhostVDPAOptions
vdpa: Add device migration blocker
vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs
vdpa: Buffer CVQ support on shadow virtqueue
vdpa: manual forward CVQ buffers
vhost-net-vdpa: add stubs for when no virtio-net device is present
vdpa: Export vhost_vdpa_dma_map and unmap calls
vhost: Add svq avail_handler callback
vhost: add vhost_svq_poll
vhost: Expose vhost_svq_add
vhost: add vhost_svq_push_elem
vhost: Track number of descs in SVQDescState
vhost: Add SVQDescState
vhost: Decouple vhost_svq_add from VirtQueueElement
vhost: Check for queue full at vhost_svq_add
vhost: Move vhost_svq_kick call to vhost_svq_add
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.
Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.
Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.
"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Setup a negative feedback system when vCPU thread
handling KVM_EXIT_DIRTY_RING_FULL exit by introducing
throttle_us_per_full field in struct CPUState. Sleep
throttle_us_per_full microseconds to throttle vCPU
if dirtylimit is in service.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <977e808e03a1cef5151cae75984658b6821be618.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce kvm_dirty_ring_size util function to help calculate
dirty ring ful time.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <f9ce1f550bfc0e3a1f711e17b1dbc8f701700e56.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce the third method GLOBAL_DIRTY_LIMIT of dirty
tracking for calculate dirtyrate periodly for dirty page
rate limit.
Add dirtylimit.c to implement dirtyrate calculation periodly,
which will be used for dirty page rate limit.
Add dirtylimit.h to export util functions for dirty page rate
limit implementation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <5d0d641bffcb9b1c4cc3e323b6dfecb36050d948.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
abstract out dirty log change logic into function
global_dirty_log_change.
abstract out dirty page rate calculation logic via
dirty-ring into function vcpu_calculate_dirtyrate.
abstract out mathematical dirty page rate calculation
into do_calculate_dirtyrate, decouple it from DirtyStat.
rename set_sample_page_period to dirty_stat_wait, which
is well-understood and will be reused in dirtylimit.
handle cpu hotplug/unplug scenario during measurement of
dirty page rate.
export util functions outside migration.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <7b6f6f4748d5b3d017b31a0429e630229ae97538.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce cpu_list_generation_id to track cpu list generation so
that cpu hotplug/unplug can be detected during measurement of
dirty page rate.
cpu_list_generation_id could be used to detect changes of cpu
list, which is prepared for dirty page rate measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <06e1f1362b2501a471dce796abb065b04f320fa5.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since the vhost-vdpa device is exposing _F_LOG, adding a migration blocker if
it uses CVQ.
However, qemu is able to migrate simple devices with no CVQ as long as
they use SVQ. To allow it, add a placeholder error to vhost_vdpa, and
only add to vhost_dev when used. vhost_dev machinery place the migration
blocker if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Shadow CVQ will copy buffers on qemu VA, so we avoid TOCTOU attacks from
the guest that could set a different state in qemu device model and vdpa
device.
To do so, it needs to be able to map these new buffers to the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external vhost-net devices to modify the state of the
VirtIO device model once the vhost-vdpa device has acknowledged the
control commands.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vhost-vdpa control virtqueue needs to know the maximum entries supported
by the virtio-net device, so we know if it is possible to apply the
filter.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Loongarch virt machine uses general hardware reduces acpi method, rather
than LS7A acpi device. Now only power management function is used in
acpi ged device, memory hotplug will be added later. Also acpi tables
such as RSDP/RSDT/FADT etc.
The acpi table has submited to acpi spec, and will release soon.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add smbios support for loongarch virt machine, and put them into fw_cfg
table so that bios can parse them quickly. The weblink of smbios spec:
https://www.dmtf.org/dsp/DSP0134, the version is 3.6.0.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-5-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add uefi bios loading support, now only uefi bios is porting to
loongarch virt machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add fw_cfg table for loongarch virt machine, including memmap table.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-2-yangxiaojuan@loongson.cn>
[rth: Replace fprintf with assert; drop unused return value;
initialize reserved slot to zero.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This legacy function is only used during the initialisation of the MIPS magnum
machine, so inline its functionality directly into mips_jazz_init() and then
remove it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-41-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that the legacy ps2_mouse_init() function is no longer used, it can be completely
removed along with its associated trace-event.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-40-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 mouse device within KBDState using
object_initialize_child() in i8042_initfn() and i8042_mmio_init() and realize
it in i8042_realizefn() and i8042_mmio_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-39-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that the legacy ps2_kbd_init() function is no longer used, it can be completely
removed along with its associated trace-event.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-38-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 keyboard device within KBDState using
object_initialize_child() in i8042_initfn() and i8042_mmio_init() and realize
it in i8042_realizefn() and i8042_mmio_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-37-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 mouse device within LASIPS2MousePort using
object_initialize_child() in lasips2_mouse_port_init() and realize it in
lasips2_mouse_port_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-34-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 keyboard device within LASIPS2KbdPort using
object_initialize_child() in lasips2_kbd_port_init() and realize it in
lasips2_kbd_port_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-33-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This makes it clearer that the pointer is a reference to the LASIPS2 container
device rather than an implied part of the QOM hierarchy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now we can implement port-based IRQs by wiring the PS2 device IRQs to the
LASI2Port named input gpios rather than directly to the LASIPS2 device, and
generate the LASIPS2 output IRQ from the int_status bitmap representing the
individual port IRQs instead of the birq boolean.
This enables us to remove the separate PS2 keyboard and PS2 mouse named input
gpios from the LASIPS2 device and simplify the register implementation to
drive the port IRQ using qemu_set_irq() rather than accessing the LASIPS2
device IRQs directly. As a consequence the IRQ level logic in lasips2_set_irq()
can also be simplified accordingly.
For now this patch ignores adding the int_status bitmap and simply drops the
birq boolean from the vmstate_lasips2 VMStateDescription. This is because the
migration stream is already missing some required LASIPS2 fields, and as this
series already introduces a migration break for the lasips2 device it is
easiest to fix this in a follow-up patch.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220712215251.7944-29-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The LASIPS2 device named input gpio is soon to be connected to the port output
IRQs. Add a new int_status field to LASIPS2State which is a bitmap representing
the port input IRQ status which will be enabled in the next patch.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220712215251.7944-28-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The named input gpio is to be connected to the IRQ output of the downstream
PS2 device and used to drive the port IRQ. Initialise the named input gpio
in lasips2_port_init() and add new lasips2_port_class_init() and
lasips2_port_realize() functions to connect the PS2 device output gpio to
the new named input gpio.
Note that the reference to lasips2_port_realize() is stored in
LASIPS2PortDeviceClass but not yet used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-27-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will soon be used to store the reference to the LASIPS2_PORT parent device
for LASIPS2_KBD_PORT and LASIPS2_MOUSE_PORT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce a new lasips2_port_init() QOM init function for the LASIPS2_PORT type
and use it to initialise a new gpio for use as a port IRQ. Add a new qemu_irq
representing the gpio as a new irq field within LASIPS2Port.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-25-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The existing boolean irq field in LASIPS2Port will soon be replaced by a proper
qemu_irq, so rename the field to birq to allow the upcoming qemu_irq to use the
irq name.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-24-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move the initialisation of the mouse port from lasips2_init() to
a new lasips2_mouse_port_init() function which will be invoked using
object_initialize_child() during the LASIPS2 device init.
Update LASIPS2State so that it now holds the new LASIPS2MousePort child object and
ensure that it is realised in lasips2_realize().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-21-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move the initialisation of the keyboard port from lasips2_init() to
a new lasips2_kbd_port_init() function which will be invoked using
object_initialize_child() during the LASIPS2 device init.
Update LASIPS2State so that it now holds the new LASIPS2KbdPort child object and
ensure that it is realised in lasips2_realize().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-20-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will be soon be used to hold the underlying PS2_MOUSE_DEVICE object.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-19-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will be soon be used to hold the underlying PS2_KBD_DEVICE object.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-18-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This becomes an abstract QOM type which will be a parent type for separate
keyboard and mouse port types.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-17-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the compiler to enforce that the PS2 device pointer is always of
type PS2State. Update the name of the pointer from dev to ps2dev to emphasise
this type change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-16-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is only one user of the legacy lasips2_initfn() function which is in
machine_hppa_init(), so inline its functionality into machine_hppa_init() and
then remove it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-15-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The base property was only needed for use by vmstate_register() in order to
preserve migration compatibility. Now that the lasips2 migration state is
registered through the DeviceClass vmsd field, the base property and also
the lasips2_properties array can be removed completely as they are no longer
required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-14-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 mouse device within PL050MouseState using
object_initialize_child() in pl050_mouse_init() and realize it in
pl050_mouse_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-12-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instantiate the PS2 keyboard device within PL050KbdState using
object_initialize_child() in pl050_kbd_init() and realize it in
pl050_kbd_realize() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will soon be used to store the reference to the PL050 parent device
for PL050_KBD_DEVICE and PL050_MOUSE_DEVICE.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-8-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will be soon be used to hold the underlying PS2_MOUSE_DEVICE object.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will be soon be used to hold the underlying PS2_KBD_DEVICE object.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the compiler to enforce that the PS2 device pointer is always of
type PS2State. Update the name of the pointer from dev to ps2dev to emphasise
this type change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the QOM types in pl050.c to be used elsewhere by simply including
pl050.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220712215251.7944-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is nothing in the specs on DMA engine interrupt lines: it should have
been in the "BCM2835 ARM Peripherals" datasheet but the appropriate
"ARM peripherals interrupt table" (p.113) is nearly empty.
All Raspberry Pi models 1-3 (based on bcm2835) have
Linux device tree (arch/arm/boot/dts/bcm2835-common.dtsi +25):
/* dma channel 11-14 share one irq */
This information is repeated in the driver code
(drivers/dma/bcm2835-dma.c +1344):
/*
* in case of channel >= 11
* use the 11th interrupt and that is shared
*/
In this patch channels 0--10 and 11--14 are handled separately.
Signed-off-by: Andrey Makarov <andrey.makarov@auriga.com>
Message-id: 20220716113210.349153-1-andrey.makarov@auriga.com
[PMM: fixed checkpatch nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
performance improvements by Jinhao
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* shadow doorbells
* ioeventfd
plus some misc fixes (Darren, Niklas).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmLRKGwACgkQTeGvMW1P
Deki7Af9Hg0ltW9RyxzUtYB5hwaMpgrHHcViBoLK8mt7wa5hh5luFb1P3/+yltUG
LU/cws93mq3jDy30dKnVa5+xugDmuEy470OxjJPCivLEpV6qpONulp+iHFIKim4N
kPXX8K1R4XVTVvCFFpmub6GUCFZpXRVW9uPAAL96BzaSjEK7K+5H3boJ7HfT5YUY
Tx9LuPQUcIUHViF/4wNU0Sqx15PoOOjHqSnA3EjCDCscqPkbhaoEoyI5Pk+BMxzf
tElNh/ffP5x0BSaKOofdtW+iHaxlSgPJ6IA0W9dwXJyRCvoaa9near2iGXDa6PEA
bRpQpudzIkL3Swfgcm4D+N7NQbCSOg==
=Wg5B
-----END PGP SIGNATURE-----
Merge tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme into staging
hw/nvme updates
performance improvements by Jinhao
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* shadow doorbells
* ioeventfd
plus some misc fixes (Darren, Niklas).
# gpg: Signature made Fri 15 Jul 2022 09:42:20 BST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme:
hw/nvme: Use ioeventfd to handle doorbell updates
nvme: Fix misleading macro when mixed with ternary operator
hw/nvme: force nvme-ns param 'shared' to false if no nvme-subsys node
hw/nvme: fix example serial in documentation
hw/nvme: Add trace events for shadow doorbell buffer
hw/nvme: Implement shadow doorbell buffer support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* New ISL69259 device model
* New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC)
* Aspeed GPIO fixes
* Extension of m25p80 with write protect bits
* More avocado tests using the Aspeed SDK
-----BEGIN PGP SIGNATURE-----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=faie
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu into staging
aspeed queue:
* New ISL69259 device model
* New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC)
* Aspeed GPIO fixes
* Extension of m25p80 with write protect bits
* More avocado tests using the Aspeed SDK
# gpg: Signature made Thu 14 Jul 2022 15:28:09 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu:
aspeed: Add fby35-bmc slot GPIO's
hw/gpio/aspeed: Don't let guests modify input pins
qtest/aspeed_gpio: Add input pin modification test
hw: m25p80: add tests for BP and TB bit write protect
hw: m25p80: Add Block Protect and Top Bottom bits for write protect
test/avocado/machine_aspeed.py: Add SDK tests
docs: aspeed: Minor updates
docs: aspeed: Add fby35 multi-SoC machine section
aspeed: Add AST1030 (BIC) to fby35
aspeed: fby35: Add a bootrom for the BMC
aspeed: Add AST2600 (BMC) to fby35
aspeed: Add fby35 skeleton
aspeed: Make aspeed_board_init_flashes public
aspeed: Refactor UART init for multi-SoC machines
aspeed: Create SRAM name from first CPU index
hw/sensor: Add Renesas ISL69259 device model
hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators
hw/i2c/pmbus: Add idle state to return 0xff's
aspeed: sbc: Allow per-machine settings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the Parfait source code analyser and issue was found in
hw/nvme/ctrl.c where the macros NVME_CAP_SET_CMBS and NVME_CAP_SET_PMRS
are called with a ternary operatore in the second parameter, resulting
in a potentially unexpected expansion of the form:
x ? a: b & FLAG_TEST
which will result in a different result to:
(x ? a: b) & FLAG_TEST.
The macros should wrap each of the parameters in brackets to ensure the
correct result on expansion.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implement Doorbel Buffer Config command (Section 5.7 in NVMe Spec 1.3)
and Shadow Doorbel buffer & EventIdx buffer handling logic (Section 7.13
in NVMe Spec 1.3). For queues created before the Doorbell Buffer Config
command, the nvme_dbbuf_config function tries to associate each existing
SQ and CQ with its Shadow Doorbel buffer and EventIdx buffer address.
Queues created after the Doorbell Buffer Config command will have the
doorbell buffers associated with them when they are initialized.
In nvme_process_sq and nvme_post_cqe, proactively check for Shadow
Doorbell buffer changes instead of wait for doorbell register changes.
This reduces the number of MMIOs.
In nvme_process_db(), update the shadow doorbell buffer value with
the doorbell register value if it is the admin queue. This is a hack
since hosts like Linux NVMe driver and SPDK do not use shadow
doorbell buffer for the admin queue. Copying the doorbell register
value to the shadow doorbell buffer allows us to support these hosts
as well as spec-compliant hosts that use shadow doorbell buffer for
the admin queue.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLO3bQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv5AgAgGe8hGOcqJSzmFgeUJ7UEaauap6E
fF4zau8Xux7R6pnvPe2FeJ70AlvstFAUoU++7G3linQ+eqnFD7E18KQkfp9qX7jY
xDFPJRf6JNhwDjxQ2Tp0ShOcm5HkDv4Z4cPlx0T+wfKTlUWCzNEkhVrjOhpDYnSe
OldsdFjY0sUjZ1R/QNiuQ65aWwOr9gJ07KfakJQMX2YCMun6SO3kB/GtmyecTV3C
uNAUIdqJLsEbR1ckdMVVmixhtzMPW2R7/vjJkxG8RXUAcDmDHkuKPhWKyZ9a7/hh
CV8iMQMup6mgT8ndb5DWv551Y+C/rA1bH9U1NkaeQ9RP83CE4a6fpSMiiQ==
=82zT
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* SCSI fuzzing fix (Mauro)
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
# gpg: Signature made Wed 13 Jul 2022 15:59:00 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
pc-bios/s390-ccw: add -Wno-array-bounds
q800: add default vendor and product information for scsi-cd devices
q800: add default vendor and product information for scsi-hd devices
scsi-disk: allow MODE SELECT block descriptor to set the block size
scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
scsi-disk: add FORMAT UNIT command
q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
scsi-disk: add new quirks bitmap to SCSIDiskState
meson: Prefix each element of firmware path
module: Use bundle mechanism
datadir: Use bundle mechanism
cutils: Introduce bundle mechanism
scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change moves the code that connects the SoC UART's to serial_hd's
to the machine.
It makes each UART a proper child member of the SoC, and then allows the
machine to selectively initialize the chardev for each UART with a
serial_hd.
This should preserve backwards compatibility, but also allow multi-SoC
boards to completely change the wiring of serial devices from the
command line to specific SoC UART's.
This also removes the uart-default property from the SoC, since the SoC
doesn't need to know what UART is the "default" on the machine anymore.
I tested this using the images and commands from the previous
refactoring, and another test image for the ast1030:
wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd
wget https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd
wget https://github.com/peterdelevoryas/OpenBIC/releases/download/oby35-cl-2022.13.01/Y35BCL.elf
Fuji uses UART1:
qemu-system-arm -machine fuji-bmc \
-drive file=fuji.mtd,format=raw,if=mtd \
-nographic
ast2600-evb uses uart-default=UART5:
qemu-system-arm -machine ast2600-evb \
-drive file=fuji.mtd,format=raw,if=mtd \
-serial null -serial mon:stdio -display none
Wedge100 uses UART3:
qemu-system-arm -machine palmetto-bmc \
-drive file=wedge100.mtd,format=raw,if=mtd \
-serial null -serial null -serial null \
-serial mon:stdio -display none
AST1030 EVB uses UART5:
qemu-system-arm -machine ast1030-evb \
-kernel Y35BCL.elf -nographic
Fixes: 6827ff20b2 ("hw: aspeed: Init all UART's with serial devices")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705191400.41632-4-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This commit adds a passthrough for PMBUS_IC_DEVICE_ID to allow Renesas
voltage regulators to return the integrated circuit device ID if they
would like to.
The behavior is very device specific, so it hasn't been added to the
general PMBUS model. Additionally, if the device ID hasn't been set,
then the voltage regulator will respond with the error byte value. The
guest error message will change slightly for IC_DEVICE_ID with this
commit.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Message-Id: <20220701000626.77395-3-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Message-Id: <20220701000626.77395-2-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In order to correctly report secure boot running firmware the values
of certain registers must be set.
We don't yet have documentation from ASPEED on what they mean. The
meaning is inferred from u-boot's use of them.
Introduce properties so the settings can be configured per-machine.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Tested-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220628154740.1117349-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When A/UX configures the CDROM device it sends a truncated MODE SELECT request
for page 1 (MODE_PAGE_R_W_ERROR) which is only 6 bytes in length rather than
10. This seems to be due to bug in Apple's code which calculates the CDB message
length incorrectly.
The work at [1] suggests that this truncated request is accepted on real
hardware whereas in QEMU it generates an INVALID_PARAM_LEN sense code which
causes A/UX to get stuck in a loop retrying the command in an attempt to succeed.
Alter the mode page request length check so that truncated requests are allowed
if the SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk is enabled, whilst also adding a
trace event to enable the condition to be detected.
[1] https://68kmla.org/bb/index.php?threads/scsi2sd-project-anyone-interested.29040/page-7#post-316444
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both MacOS and A/UX make use of vendor-specific MODE SELECT commands with PF=0
to identify SCSI devices:
- MacOS sends a MODE SELECT command with PF=0 for the MODE_PAGE_VENDOR_SPECIFIC
(0x0) mode page containing 2 bytes before initialising a disk
- A/UX (installed on disk) sends a MODE SELECT command with PF=0 during SCSI
bus enumeration, and gets stuck in an infinite loop if it fails
Add a new SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk to allow both
PF=0 MODE SELECT commands and implement a MODE_PAGE_VENDOR_SPECIFIC (0x0)
mode page which is compatible with MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During SCSI bus enumeration A/UX sends a MODE SENSE command to the CDROM with
the DBD bit unset and expects the response to include a block descriptor. As per
the latest SCSI documentation, QEMU currently force-disables the block
descriptor for CDROM devices but the A/UX driver expects the requested block
descriptor to be returned.
If the block descriptor is not returned in the response then A/UX becomes
confused, since the block descriptor returned in the MODE SENSE response is
used to generate a subsequent MODE SELECT command which is then invalid.
Add a new SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk to allow this behaviour
to be enabled as required. Note that an additional workaround is required for
the previous SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk which must never
return a block descriptor even though the DBD bit is left unset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the mechanisms MacOS uses to identify CDROM drives compatible with MacOS
is to send a custom MODE SELECT command for page 0x30 to the drive. The
response to this is a hard-coded manufacturer string which must match in order
for the CDROM to be usable within MacOS.
Add an implementation of the MODE SELECT page 0x30 response guarded by a newly
defined SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk bit so that CDROM drives
attached to non-Apple machines function exactly as before.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Developers often run QEMU without installing. The bundle mechanism
allows to look up files which should be present in installation even in
such a situation.
It is a general mechanism and can find any files in the installation
tree. The build tree will have a new directory, qemu-bundle, to
represent what files the installation tree would have for reference by
the executables.
Note that it abandons compatibility with Windows older than 8. The
extended support for the prior version, 7 ended more than 2 years ago,
and it is unlikely that someone would like to run the latest QEMU on
such an old system.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220624145039.49929-3-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is no longer used.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-7-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Keep generated_co_wrapper and coroutine_fn pairs together. This should
make it clear that each I/O function has these two versions.
Also move blk_co_{pread,pwrite}()'s implementations out of the header
file for consistency.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220705161527.1054072-18-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert blk_truncate() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-17-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert blk_ioctl() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-16-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-15-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-14-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-13-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert blk_pwrite_compressed() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-12-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Swap 'buf' and 'bytes' around for consistency with other I/O functions.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-11-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert it into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-10-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement blk_preadv_part() using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-9-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-8-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We need to add include/sysemu/block-backend-io.h to the inputs of the
block-gen.c target defined in block/meson.build.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-7-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It does not mutate the buffer.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-6-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-5-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert bdrv_pwrite_sync() to being implemented using
generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-9-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
bdrv_{pread,pwrite}() now return -EIO instead of -EINVAL when 'bytes' is
negative, making them consistent with bdrv_{preadv,pwritev}() and
bdrv_co_{pread,pwrite,preadv,pwritev}().
bdrv_pwrite_zeroes() now also calls trace_bdrv_co_pwrite_zeroes() and
clears the BDRV_REQ_MAY_UNMAP flag when appropriate, which it didn't
previously.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-8-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement bdrv_{pread,pwrite}() using generated_co_wrapper.
unsigned int fits in int64_t, so all callers remain correct.
bdrv_check_request32() is called further down the stack and causes -EIO
to be returned if 'bytes' is negative or greater than
BDRV_REQUEST_MAX_BYTES, which in turns never exceeds SIZE_MAX.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-7-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It does not mutate the buffer.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-6-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In 60592cfed2 ("hw/arm/virt: dt: add kaslr-seed property"), the
kaslr-seed property was added, but the equally as important rng-seed
property was forgotten about, which has identical semantics for a
similar purpose. This commit implements it in exactly the same way as
kaslr-seed. It then changes the name of the disabling option to reflect
that this has more to do with randomness vs determinism, rather than
something particular about kaslr.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[PMM: added deprecated.rst section for the deprecation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This queue consists of improvements and bug fixes in TCG, powernv and
pSeries, with some fixes in other areas as well.
- tcg and target/ppc: BCDA and mffscdrn implementations, Remove CONFIG_INT128
conditional code
- fix '-cpu max' alias
- remove '-cpu default' alias
- spapr: fixes in DDW handling, H_WATCHDOG support
- powernv: cleanups in the pnv-phb3/4 models
- fix core type of MPC8555 and MPC8560 models
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYsXrpgAKCRA82cqW3gMx
ZBe9AP4oqMTFw7r9EQPJU4QFMUeAVABl4o0xNb2wLyYov9CtKAD+LoVERSmtLTJ1
kFpgBrRTWKVylaLEdZQoTdFlJeBwzQg=
=GPG1
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220706' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-07-06:
This queue consists of improvements and bug fixes in TCG, powernv and
pSeries, with some fixes in other areas as well.
- tcg and target/ppc: BCDA and mffscdrn implementations, Remove CONFIG_INT128
conditional code
- fix '-cpu max' alias
- remove '-cpu default' alias
- spapr: fixes in DDW handling, H_WATCHDOG support
- powernv: cleanups in the pnv-phb3/4 models
- fix core type of MPC8555 and MPC8560 models
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYsXrpgAKCRA82cqW3gMx
# ZBe9AP4oqMTFw7r9EQPJU4QFMUeAVABl4o0xNb2wLyYov9CtKAD+LoVERSmtLTJ1
# kFpgBrRTWKVylaLEdZQoTdFlJeBwzQg=
# =GPG1
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Jul 2022 01:38:06 AM +0530
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220706' of https://gitlab.com/danielhb/qemu: (34 commits)
target/ppc: Fix MPC8555 and MPC8560 core type to e500v1
target/ppc/cpu-models: Remove the "default" CPU alias
target/ppc: Return default CPU for max CPU
target/ppc: implement cdtbcd
target/ppc: implement cbcdtd
target/ppc: implement addg6s
target/ppc: Add flag for ISA v2.06 BCDA instructions
tests/tcg/ppc64: Add mffsce test
target/ppc: Implement mffscdrn[i] instructions
target/ppc: Move mffs[.] to decodetree
target/ppc: Move mffsl to decodetree
target/ppc: Move mffsce to decodetree
target/ppc: Move mffscrn[i] to decodetree
target/ppc: Fix insn32.decode style issues
ppc/spapr: Implement H_WATCHDOG
ppc: Define SETFIELD for the ppc target
target/ppc: use int128.h methods in vsubcuq
target/ppc: use int128.h methods in vsubecuq and vsubeuqm
target/ppc: use int128.h methods in vsubuqm
target/ppc: use int128.h methods in vaddcuq
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The new PAPR 2.12 defines a watchdog facility managed via the new
H_WATCHDOG hypercall.
This adds H_WATCHDOG support which a proposed driver for pseries uses:
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=303120
This was tested by running QEMU with a debug kernel and command line:
-append \
"pseries-wdt.timeout=60 pseries-wdt.nowayout=1 pseries-wdt.action=2"
and running "echo V > /dev/watchdog0" inside the VM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220622051008.1067464-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It keeps repeating, move it to the header. This uses __builtin_ffsll() to
allow using the macros in #define.
This is not using the QEMU's FIELD macros as this would require changing
all such macros found in skiboot (the PPC PowerNV firmware).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220628080544.1509428-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PAPR+/LoPAPR says:
===
The platform must restore the default DMA window for the PE on a call
to the ibm,remove-pe-dma-window RTAS call when all of the following
are true:
a. The call removes the last DMA window remaining for the PE.
b. The DMA window being removed is not the default window
===
This resets DMA as PAPR mandates.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220622052955.1069903-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is not advisable to execute an object_dynamic_cast() to poke into
bus->qbus.parent and follow it up with a C cast into the PnvPHB type we
think we got.
In fact this is not needed. There is nothing sophisticated being done
with the PHB object retrieved during root_port_realize() for both PHB3
and PHB4. We're retrieving a PHB reference just to access phb->chip_id
and phb->phb_id and use them to define the chassis/slot of the root
port.
phb->phb_id is already being passed to pnv_phb_attach_root_port() via
the 'index' parameter. Let's also add a 'chip_id' parameter to this
function and assign chassis and slot right there. This will spare us
from the hassle of accessing the PHB object inside realize().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220621173436.165912-4-danielhb413@gmail.com>
This commit wires up bootinfo's RNG seed attribute so that Linux VMs can
have their RNG seeded from the earliest possible time in boot, just like
the "rng-seed" device tree property on those platforms. The link
contains the corresponding Linux patch.
Link: https://lore.kernel.org/lkml/20220626111509.330159-1-Jason@zx2c4.com/
Based-on: <20220625152318.120849-1-Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Message-Id: <20220626111804.330745-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Fix edk2/opensbi jobs to not run automatically by accident
* Improve timings in the migration qtest
* Remove libvixl disassembler
* Add ukrainian translation
* Require a recent version of libpng
-----BEGIN PGP SIGNATURE-----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=Q2vV
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-07-05' of https://gitlab.com/thuth/qemu into staging
* Fix memory leak in test-cutils
* Fix edk2/opensbi jobs to not run automatically by accident
* Improve timings in the migration qtest
* Remove libvixl disassembler
* Add ukrainian translation
* Require a recent version of libpng
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLECEkRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbV7lxAAmEItM6PIoW58eWPzReKVH8LE2w3UlvOZ
# JQhNgJjuN23fqjUVkcT0yCfdNCz/nKvafHnxfHQnrAXyB5V5vU8ovBgSuWK2mcmD
# NTFK+/2x5lcsyBrOe3QoeD2g1r7+Os3AYVkdnN/t2HAMLwQyaoshKaMV/UHC9O/i
# Kle1svYRNyCgyXJgxaOdbVMBSLi/L9h2R5AaG31GIi9wnf0n8HDH/ONtmeIpN09g
# BlMeZqPhGJT+tpMvviif65/Za57Y9h/r+TOgEIIs00cWmxqaBmcXXN9qog2s0n7A
# nOm3ck2lpGJCQ6+sl6/Mphyr3X6nWHsxGrLDElS0Ba5bg6T/Xqfg2pBcb81Klkjc
# QcTdFPiMxKUczgpFq326sqiaVzMgys4vwnW5iPSd5swNzrkYKADAIreki5jyM3cH
# lohBG/ruOmg5xMkX2K6pra0iOAeCz44Ku/HTREfY1CTUgEQZJY4SZrMJSnmUTnM+
# EQCkDcmOsnFDaQazneCbo18l37cXOgEhH8VoGAOqg1aRjr7TNlsJzx87PoD+9zNR
# GEh7kp18ABRGik5ZACdLQ/HhhOJa8+UWsGCwCdeBGv/TVug1Byz0OUG0PxX3X5SV
# WwubeKyZcqzoH92SQI3jZGSmuGBySy9q51T2k8FjZvaDsPiUN/MLPspNezH1qj2B
# W7qEaqIyGmo=
# =Q2vV
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Jul 2022 03:15:45 PM +0530
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-07-05' of https://gitlab.com/thuth/qemu:
include/qemu/host-utils: Remove unused code in the *_overflow wrappers
meson.build: Require a recent version of libpng
po: add ukrainian translation
disas: Remove libvixl disassembler
tests: use consistent bandwidth/downtime limits in migration tests
tests: increase migration test converge downtime to 30 seconds
tests: wait for migration completion before looking for STOP event
tests: wait max 120 seconds for migration test status changes
gitlab-ci: Extend timeout for ubuntu-20.04-s390x-all to 75m
gitlab: honour QEMU_CI variable in edk2/opensbi jobs
gitlab: tweak comments in edk2/opensbi jobs
gitlab: normalize indentation in edk2/opensbi rules
tests/fp: Do not build softfloat3 tests if TCG is disabled
tests: fix test-cutils leaks
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In general loongarch ipi device, 32bit registers is emulated, however for
anysend/mailsend device only 64bit register access is supported. So separate
the ipi memory region into two regions, including 32 bits and 64 bits.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220705064901.2353349-2-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to commit cec07c0b61 the code in the #else paths was required
for GCC < 5.0 and Clang < 3.8. We don't support such old compilers
at all anymore, so we can remove these lines now. We keep the wrapper
function, though, since they are easier to read and help to make sure that
the parameters have the right types.
Message-Id: <20220701025132.303469-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The disassembly via capstone should be superiour to our old vixl
sources nowadays, so let's finally cut this old disassembler out
of the QEMU source tree.
Message-Id: <20220603164249.112459-1-thuth@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Loongarch pch msi intc connects to extioi controller, the range of irq
number is 64-255. Add a property for irqbase, so that we can compute
the irq offset from the view of pch_msi controller with the method:
msi vector (from view of upper extioi intc) - irqbase
Signed-off-by: Mao Bibo <maobibo@loongson.cn>
Message-Id: <20220701030740.2469162-1-maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The update makes it easier to find and specify devices.
They can only be found by device type name without the id field,
for example, devices of the same type have the same label.
The update also adds a head field,
which is useful for devices that support multiple heads,
such as virtio-gpu.
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Message-Id: <4C23C17B8E87E74E906A25A3254A03F4018FC045B0@SHASXM06.verisilicon.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.
The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.
This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.
The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).
Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This commit adds support for DMA RX in slave mode while using the new
register set in the AST2600 and AST1030. This patch also pretty much
assumes packet mode is enabled, I'm not sure if this will work in DMA
step mode.
This is particularly useful for testing IPMB exchanges between Zephyr
and external devices, which requires multi-master I2C support and DMA in
the new register mode, because the Zephyr drivers from Aspeed use DMA in
the new mode by default. The Zephyr drivers are also using packet mode.
The typical sequence of events for receiving data in DMA slave + packet
mode is that the Zephyr firmware will configure the slave address
register with an address to receive on and configure the bus's function
control register to enable master mode and slave mode simultaneously at
startup, before any transfers are initiated.
RX DMA is enabled in the slave mode command register, and the slave RX
DMA buffer address and slave RX DMA buffer length are set. TX DMA is not
covered in this patch.
When the Aspeed I2C controller receives data from some other I2C master,
it will reset the I2CS_DMA_LEN RX_LEN value to zero, then buffer
incoming data in the RX DMA buffer while incrementing the I2CC_DMA_ADDR
address counter and decrementing the I2CC_DMA_LEN counter. It will also
update the I2CS_DMA_LEN RX_LEN value along the way.
Once all the data has been received, the bus controller will raise an
interrupt indicating a packet command was completed, the slave address
matched, a normal stop condition was seen, and the transfer was an RX
operation.
If the master sent a NACK instead of a normal stop condition, or the
transfer timed out, then a slightly different set of interrupt status
values would be set. Those conditions are not handled in this commit.
The Zephyr firmware then collects data from the RX DMA buffer and clears
the status register by writing the PKT_MODE_EN bit to the status
register. In packet mode, clearing the packet mode interrupt enable bit
also clears most of the other interrupt bits automatically (except for a
few bits above it).
Note: if the master transmit or receive functions were in use
simultaneously with the slave mode receive functionality, then the
master mode functions may have raised the interrupt line for the bus
before the DMA slave transfer is complete. It's important to have the
slave's interrupt status register clear throughout the receive
operation, and if the slave attempts to raise the interrupt before the
master interrupt status is cleared, then it needs to re-raise the
interrupt once the master interrupt status is cleared. (And vice-versa).
That's why in this commit, when the master interrupt status is cleared
and the interrupt line is lowered, we call the slave interrupt _raise_
function, to see if the interrupt was pending. (And again, vice-versa).
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-8-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add slave mode functionality for the Aspeed I2C controller in old
register mode. This is implemented by realizing an I2C slave device
owned by the I2C controller and attached to its own bus.
The I2C slave device only implements asynchronous sends on the bus, so
slaves not supporting that will not be able to communicate with it.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: checkpatch fixes ]
Message-Id: <20220601210831.67259-6-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-7-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().
The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Allow slaves to master the bus by registering a bottom halve. If the bus
is busy, the bottom half is queued up. When a slave has succesfully
mastered the bus, the bottom half is scheduled.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg : - fixed typos in commit log ]
Message-Id: <20220601210831.67259-4-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-5-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
sysbus_mmio_map maps devices into "get_system_memory()".
With the new SoC memory attribute, we want to make sure that each device is
mapped into the SoC memory.
In single SoC machines, the SoC memory is the same as "get_system_memory()",
but in multi SoC machines it will be different.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Multi-SoC machines can use this property to specify a memory container
for each SoC. Single SoC machines will just specify get_system_memory().
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220624003701.1363500-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Currently, the Aspeed machines allocate a ram container region in
which the machine ram region is mapped. See commit ad1a978218
("aspeed: add a RAM memory region container"). An extra region is
mapped after ram in the ram container to catch invalid access done by
FW. That's how FW determines the size of ram. See commit ebe31c0a8e
("aspeed: add a max_ram_size property to the memory controller").
Let's move all the logic under the SoC where it should be. It will
also ease the work on multi SoC support.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220623202123.3972977-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
v2: - add arguments to QEMUMachine constructor in test, to make it work
on arm in gitlab pipeline
- use bdrv_inc_in_flight() / bdrv_dec_in_flight() instead of direct
manipulation with bs->in_flight
- add new options for copy-before-write filter
- new trace points for NBD
- prefer unsigned type for some 'in_flight' fields
-----BEGIN PGP SIGNATURE-----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=ndKk
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-06-14-v2' of https://gitlab.com/vsementsov/qemu into staging
Block jobs & NBD patches
v2: - add arguments to QEMUMachine constructor in test, to make it work
on arm in gitlab pipeline
- use bdrv_inc_in_flight() / bdrv_dec_in_flight() instead of direct
manipulation with bs->in_flight
- add new options for copy-before-write filter
- new trace points for NBD
- prefer unsigned type for some 'in_flight' fields
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmK8BqkACgkQVh8kwfGf
# efuiMw/+P9FFLfGFSjVP+LYeT0Ah6kN1ypCMQzIk3Qq/J6qgMZhtRqpQoZOfIFQL
# U9fGmEtQZ7gvEMD/nJToL6uOYlnQfPxDcA6GrRwWWE3rcFiPK4J0q2LlnPLn4QaU
# W/qag5l/QnZfLlj/iV6neWOEvqdnvY1L8IS+T8xV6N0iBYlwgMC/6FGshQwehzcV
# T5F1qPGB0vjFDjf92LFPEsvsFFHjHIVPwOyJMvF64QtSk57utikq/la9PI/yA9AH
# Ll4mNQuZKx6rSI5wE6b21jc8iOUvaoHdPSEDQZfNILSdgGdiKvFwE51y+baGnIAD
# TpjxfG59q0jyGxMjQVxMRSFaxAC4+Mqi82diSPv4xbiUdsE4byJH0oENn4z7+wAv
# EvjuU9yx4FfHHltoUNwfn2pv00o/ELdZIoBNmW36rPxSGZMvfVfRtuBL7XWNUFbW
# Fr4BwsjC4KfIxb16QTBGhXVv6grxdlwoU9N23npdi0YpW1ftZzXGDa85+gINQ807
# eK/gP/OtYPwIql0bgmLiuaRNzC9psmQOO6vQbdvd/e4BEVWkxiez37+e+zFMStmL
# OAL8rS6jckUoxVZjCYFEWg97XOobLUIhQxt9Fwh2omMDGKTwv861ghUAivxSWs93
# IRNxfwqNPxnpDDXjnK1ayZgU08IL98AUYVKcPN1y8JvEhB4Hr1k=
# =ndKk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jun 2022 01:30:41 PM +0530
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg: aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* tag 'pull-block-2022-06-14-v2' of https://gitlab.com/vsementsov/qemu:
block: use 'unsigned' for in_flight field on driver state
nbd: trace long NBD operations
iotests: copy-before-write: add cases for cbw-timeout option
block/copy-before-write: implement cbw-timeout option
block/block-copy: block_copy(): add timeout_ns parameter
util: add qemu-co-timeout
iotests: add copy-before-write: on-cbw-error tests
block/copy-before-write: add on-cbw-error open parameter
block/copy-before-write: refactor option parsing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add possibility to limit block_copy() call in time. To be used in the
next commit.
As timed-out block_copy() call will continue in background anyway (we
can't immediately cancel IO operation), it's important also give user a
possibility to pass a callback, to do some additional actions on
block-copy call finish.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add new API, to make a time limited call of the coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
xen_piix_pci_write_config_client() is implemented in the xen sub tree and
uses PIIX constants internally, thus creating a direct dependency on
PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of
xen_piix_pci_write_config_client() can be moved to PIIX which resolves
the dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-3-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only user of xen_set_pci_link_route() is
xen_piix_pci_write_config_client() which implements PIIX-specific logic in
the xen namespace. This makes xen-hvm depend on PIIX which could be
avoided if xen_piix_pci_write_config_client() was implemented in PIIX. In
order to do this, xen_set_pci_link_route() needs to be stubbable which
this patch addresses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-2-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
pi440fx_state is an out-parameter which is never read by the caller.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220612192800.40813-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It always returns IOVA_OK so nobody uses it.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220427154931.3166388-1-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will be used for implementing the xtensa select_one
system call. Choose "poll" over "select" so that we can
reuse Glib's g_poll constants and to avoid struct timeval.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has been replaced by *_write.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has been replaced by *_write.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For arm-compat, initialize console_{in,out}_gf;
otherwise, initialize stdio file descriptors.
This will go some way to cleaning up arm-compat, and
will allow other semihosting to use normal stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a GuestFDType for connecting to the semihosting console.
Hook up to read, write, isatty, and fstat syscalls.
Note that the arm-specific syscall flen cannot be applied
to the console, because the console is not a descriptor
exposed to the guest.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will replace qemu_semihosting_console_{outs,outc},
but we need more plumbing first.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename qemu_semihosting_connect_chardevs to
qemu_semihosting_chardev_init; pass the result
directly to qemu_semihosting_console_init.
Store the chardev in SemihostingConsole instead
of SemihostingConfig, which lets us drop
semihosting_get_chardev.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow more than one character to be read at one time.
Will be used by m68k and nios2 semihosting for stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need CPUArchState, and we do want the CPUState of the
thread performing the operation -- use this instead of current_cpu.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The implementation of qemu_semihosting_console_inc does not
defer to gdbstub, but only reads from the fifo in console.c.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change 'ret' to uint64_t. This resolves a FIXME in the
m68k and nios2 semihosting that we've lost data.
Change 'err' to int. There is nothing target-specific
about the width of the errno value.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This syscall will be used by m68k and nios2 semihosting.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These syscalls will be used by m68k and nios2 semihosting.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_SYSTEM to a
reusable function.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_RENAME to a
reusable function.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_REMOVE to a
reusable function.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ARM-specific SYS_FLEN isn't really something that can be
reused by other semihosting apis, but there are parts that can
reused for the implementation of semihost_sys_fstat.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_ISTTY to a
reusable function. This handles all GuestFD.
Add a common_semi_istty_cb helper to translate the Posix
error return, 0+ENOTTY, to the Arm semihosting not-a-file
success result.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_SEEK to a
reusable function. This handles all GuestFD. Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_seek_cb.
Expand the internal type of the offset to int64_t, and
provide the whence argument, which will be required by
m68k and nios2 semihosting.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_WRITE to a
reusable function. This handles all GuestFD. This removes
the last use of common_semi_syscall_len.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_READ to a
reusable function. This handles all GuestFD. Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_rw_cb.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_CLOSE to a
reusable function. This handles all GuestFD.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_OPEN to a
reusable function. This handles gdb and host file i/o.
Add helpers to validate the length of the filename string.
Prepare for usage by other semihosting by allowing the
filename length parameter to be 0, and calling strlen.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define constants for the errno values defined by the
gdb remote fileio protocol.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have two copies of these structures, and require them
in semihosting/ going forward.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of these flags. Place them in the
file with gdb_do_syscall, with which they belong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This header is not private to the top-level semihosting directory,
so place it in the public include directory.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In arm-compat-semi.c, we have more advanced treatment of
guest file descriptors than we do in other implementations.
Split out GuestFD and related functions to a new file so
that they can be shared.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mirror the interface of the user-only function of the same name.
Use probe_access_flags for the common case of ram, and
cpu_memory_rw_debug for the uncommon case of mmio.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use probe_access_flags (pmm)
Rather that static (and not even inline) functions within a
header, move the functions to semihosting/uaccess.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were reporting unconditional success for these functions;
pass on any failure from cpu_memory_rw_debug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Vhost has error notifications, let's log them like other errors.
For each virt-queue setup eventfd for vring error notifications.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[vsementsov: rename patch, change commit message and dump error like
other errors in the file]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220623161325.18813-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Kernel and user vhost may report virtqueue errors via eventfd.
This is only reliable way to get notification about protocol error.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Message-Id: <20220623161325.18813-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
We need to fetch the name of the current accelerator in flexible error
messages more going forward. Let's create a helper that gives it to us
without casting in the target code.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all the PS2 devices have been converted to use GPIOs the update_irq()
callback function and the update_arg parameter can be removed.
This allows these arguments to be completely removed from ps2_kbd_init() and
ps2_mouse_init(), along with the transitional logic that was added to
ps2_raise_irq() and ps2_lower_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-55-mark.cave-ayland@ilande.co.uk>
This describes the I8042 device interface implemented within QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-54-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This describes the I8042_MMIO device interface implemented within QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-51-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This describes the LASI PS2 device interface implemented within QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-49-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation for handling vmstate_register() within the device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-45-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Now that the register memory regions are exposed as SysBus memory regions, move
the mapping of the LASIPS2 registers from lasips2_initfn() to the HPPA machine
(which is its only user).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-43-mark.cave-ayland@ilande.co.uk>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy LASIPS2
wrapper function. Eventually the wrapper function will be removed, but for now
rename it to lasips2_initfn() to avoid a naming collision.
At the same time update lasips2_initfn() return the LASIPS2 device so that it
can later be accessed using qdev APIs by the HPPA machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-41-mark.cave-ayland@ilande.co.uk>
This allows the QOM types in lasips2.c to be used elsewhere by simply including
lasips2.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-40-mark.cave-ayland@ilande.co.uk>
This allows both IRQs to be declared as a single qdev gpio array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-36-mark.cave-ayland@ilande.co.uk>
Define the gpio for the PS2 output IRQ in ps2_init() and add logic to optionally
use it in ps2_raise_irq() and ps2_lower_irq() if the gpio is connected. If the
gpio is not connected then call the legacy update_irq() function as before.
This allows the incremental conversion of devices from the legacy update_irq()
function to use gpios instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-35-mark.cave-ayland@ilande.co.uk>
This function is no longer used outside of ps2.c and so can be declared static.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-32-mark.cave-ayland@ilande.co.uk>
Now that the register memory region is exposed as a SysBus memory region, move
the mapping of the I8042_MMIO registers from i8042_mm_init() to the MIPS magnum
machine (which is its only user).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-29-mark.cave-ayland@ilande.co.uk>
This exposes the I8042_MMIO device to the caller to allow the register memory
region to be mapped outside of i8042_mm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-28-mark.cave-ayland@ilande.co.uk>
Move the initialisation of the register memory region to the I8042_MMIO device
realize function and expose it using sysbus_init_mmio().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-26-mark.cave-ayland@ilande.co.uk>
This will soon be used to set the size of the register memory region using a
qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-25-mark.cave-ayland@ilande.co.uk>
Currently i8042_mm_init() creates a new KBDState directly which is used by the MIPS
magnum machine. Introduce a new I8042_MMIO QOM type that will soon be used to
allow the MIPS magnum machine to be wired up using standard qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-22-mark.cave-ayland@ilande.co.uk>
This allows the QOM types in pckbd.c to be used elsewhere by simply including
i8042.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-21-mark.cave-ayland@ilande.co.uk>
This allows the QOM types in pckbd.c to be used elsewhere by simply including
i8042.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-20-mark.cave-ayland@ilande.co.uk>
The functionality of ps2_common_reset() can be moved into a new ps2_reset() function
for the PS2_DEVICE QOM type. Update PS2DeviceClass to hold a reference to the parent
reset function and update the PS2_KBD_DEVICE and PS2_MOUSE_DEVICE types to use
device_class_set_parent_reset() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-9-mark.cave-ayland@ilande.co.uk>
This is in preparation for allowing the new PS2_KBD_DEVICE and PS2_MOUSE_DEVICE
QOM types to reference the parent PS2_DEVICE device reset() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-8-mark.cave-ayland@ilande.co.uk>
With the latest changes it is now possible to improve some of the function
prototypes in ps2.c and ps.h to use the appropriate PS2KbdState or
PS2MouseState type instead of being a void opaque.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-7-mark.cave-ayland@ilande.co.uk>
Move the QOM type definitions into the ps2.h header file to allow the new QOM
types to be used by other devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-6-mark.cave-ayland@ilande.co.uk>
It seems that aio_wait_kick always required a memory barrier
or atomic operation in the caller, but nobody actually
took care of doing it.
Let's put the barrier in the function instead, and pair it
with another one in AIO_WAIT_WHILE. Read aio_wait_kick()
comment for further explanation.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220524173054.12651-1-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much logic to simply check that bitmaps are of the same
size. Let's just define that hbitmap_merge() and
bdrv_dirty_bitmap_merge_internal() require their argument bitmaps be of
same size, this simplifies things.
Let's look through the callers:
For backup_init_bcs_bitmap() we already assert that merge can't fail.
In bdrv_reclaim_dirty_bitmap_locked() we gracefully handle the error
that can't happen: successor always has same size as its parent, drop
this logic.
In bdrv_merge_dirty_bitmap() we already has assertion and separate
check. Make the check explicit and improve error message.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220517111206.23585-4-v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_drain() has not been used since commit 9a0cec664e ("mirror:
use bdrv_drained_begin/bdrv_drained_end") in 2016. Remove it so there
are fewer drain scenarios to worry about.
Use bdrv_drained_begin()/bdrv_drained_end() instead. They are "mixed"
functions that can be called from coroutine context. Unlike
bdrv_co_drain(), these functions provide control of the length of the
drained section, which is usually the right thing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220521122714.3837731-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the new command one can:
- assign flexible resources (queues, interrupts) to primary and
secondary controllers,
- toggle the online/offline state of given controller.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With four new properties:
- sriov_v{i,q}_flexible,
- sriov_max_v{i,q}_per_vf,
one can configure the number of available flexible resources, as well as
the limits. The primary and secondary controller capability structures
are initialized accordingly.
Since the number of available queues (interrupts) now varies between
VF/PF, BAR size calculation is also adjusted.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Introduce handling for Secondary Controller List (Identify command with
CNS value of 15h).
Secondary controller ids are unique in the subsystem, hence they are
reserved by it upon initialization of the primary controller to the
number of sriov_max_vfs.
ID reservation requires the addition of an intermediate controller slot
state, so the reserved controller has the address 0xFFFF.
A secondary controller is in the reserved state when it has no virtual
function assigned, but its primary controller is realized.
Secondary controller reservations are released to NULL when its primary
controller is unregistered.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implementation of Primary Controller Capabilities data
structure (Identify command with CNS value of 14h).
Currently, the command returns only ID of a primary controller.
Handling of remaining fields are added in subsequent patches
implementing virtualization enhancements.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This is for code which needs a portable equivalent to a QIOChannelFile
connected to /dev/null.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add support for writing and reading the device address register in old
register mode.
On the AST2400 (only 1 slave address)
* no upper bits
On the AST2500 (2 possible slave addresses),
* bit[31] : Slave Address match indicator
* bit[30] : Slave Address Receiving pending
On the AST2600 (3 possible slave addresses),
* bit[31-30] : Slave Address match indicator
* bit[29] : Slave Address Receiving pending
The model could be more precise to take into account all fields but
since the Linux driver is masking the register value being set, it
should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable
additional device addresses on ast2[56]xx") from Zeiv. This can be
addressed later.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: add details to commit log ]
Message-Id: <20220601210831.67259-3-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Moves register definitions and short commonly used inlined functiosn to
the header file to help tidy up the implementation file.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324
Message-Id: <20220331043248.2237838-8-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On AST2600, I2C has a secondary mode, called "new mode", which changes
the layout of registers, adds some minor behavior changes, and
introduces a new way to transfer data called "packet mode".
Most of the bit positions of the fields are the same between old and new
mode, so we use SHARED_FIELD_XX macros to reuse most of the code between
the different modes.
For packet mode, most of the command behavior is the same compared to
other modes, but there are some minor changes to how interrupts are
handled compared to other modes.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e
Message-Id: <20220331043248.2237838-6-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Using a register array will allow us to represent old-mode and new-mode
I2C registers by using the same underlying register array, instead of
adding an entire new set of variables to represent new mode.
As part of this, we also do additional cleanup to use ARRAY_FIELD_
macros instead of FIELD_ macros on registers.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3
[ clg: use of memset in aspeed_i2c_bus_reset() ]
Message-Id: <20220331043248.2237838-5-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Occasionally a peripheral will have different operating modes, where the
MMIO layout changes, but some of the register fields have the same offsets
and behaviors.
To help support this, we add SHARED_FIELD_XX macros that create SHIFT,
LENGTH, and MASK macros for the fields that are shared across registers,
and accessors for these fields.
An example use may look as follows:
There is a peripheral with registers REG_MODE1 and REG_MODE2 at
different addreses, and both have a field FIELD1 initialized by
SHARED_FIELD().
Depending on what mode the peripheral is operating in, the user could
extract FIELD1 via
SHARED_ARRAY_FIELD_EX32(s->regs, R_REG_MODE1, FIELD1)
or
SHARED_ARRAY_FIELD_EX32(s->regs, R_REG_MODE2, FIELD1)
Signed-off-by: Joe Komlodi <komlodi@google.com>
Change-Id: Id3dc53e7d2f8741c95697cbae69a81bb699fa3cb
Message-Id: <20220331043248.2237838-2-komlodi@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on already existing QEMU implementation created a signed
256 bit by 128 bit division needed to implement the vector divide
extended signed quadword instruction from PowerISA 3.1
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-6-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on already existing QEMU implementation, created an unsigned 256
bit by 128 bit division needed to implement the vector divide extended
unsigned instruction from PowerISA3.1
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220525134954.85056-5-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching address space with mutex lock hold, mapping will be
replayed for assigned device. This will trigger relock deadlock.
Also release the mutex resource in unrealize routine.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently assigned devices can not work in virtio-iommu bypass mode.
Guest driver fails to probe the device due to DMA failure. And the
reason is because of lacking GPA -> HPA mappings when VM is created.
Add a root container memory region to hold both bypass memory region
and iommu memory region, so the switch between them is supported
just like the implementation in virtual VT-d.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
An initial simple upstream port emulation to allow the creation
of CXL switches. The Device ID has been allocated for this use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Forward remote device's interrupts to the guest
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-id: 9523479eaafe050677f4de2af5dd0df18c27cfd9.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assign separate address space for each device in the remote processes.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: afe0b0a97582cdad42b5b25636a29c523265a10a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define vfio-user object which is remote process server for QEMU. Setup
object initialization functions and properties necessary to instantiate
the object
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e45a17001e9b38f451543a664ababdf860e5f2f2.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add vfio-user to x-remote machine. It is a boolean, which indicates if
the machine supports vfio-user protocol. The machine configures the bus
differently vfio-user and multiprocess protocols, so this property
informs it on how to configure the bus.
This property should be short lived. Once vfio-user fully replaces
multiprocess, this property could be removed.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 5d51a152a419cbda35d070b8e49b772b60a7230a.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add blocker to prevent hot-unplug of devices
TYPE_VFIO_USER_SERVER, which is introduced shortly, attaches itself to a
PCIDevice on which it depends. If the attached PCIDevice gets removed
while the server in use, it could cause it crash. To prevent this,
TYPE_VFIO_USER_SERVER adds an unplug blocker for the PCIDevice.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c41ef80b7cc063314d629737bed2159e5713f2e0.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow retrieving only a subset of statistics. This can be useful
for example in order to plot a subset of the statistics many times
a second: KVM publishes ~40 statistics for each vCPU on x86; retrieving
and serializing all of them would be useless.
Another use will be in HMP in the following patch; implementing the
filter in the backend is easy enough that it was deemed okay to make
this a public interface.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ],
"providers": [
{ "provider": "kvm",
"names": [ "l1d_flush", "exits" ] } } }
{ "return": {
"vcpus": [
{ "path": "/machine/unattached/device[2]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 41213 },
{ "name": "exits", "value": 74291 } ] } ] },
{ "path": "/machine/unattached/device[4]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 16132 },
{ "name": "exits", "value": 57922 } ] } ] } ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow retrieving the statistics from a specific provider only.
This can be used in the future by HMP commands such as "info
sync-profile" or "info profile". The next patch also adds
filter-by-provider capabilities to the HMP equivalent of
query-stats, "info stats".
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vm",
"providers": [
{ "provider": "kvm" } ] } }
The QAPI is a bit more verbose than just a list of StatsProvider,
so that it can be subsequently extended with filtering of statistics
by name.
If a provider is specified more than once in the filter, each request
will be included separately in the output.
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an HMP command to retrieve statistics collected at run-time.
The command will retrieve and print either all VM-level statistics,
or all vCPU-level statistics for the currently selected CPU.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the knowledge of IEC and SI prefixes out of size_to_str and
freq_to_str, so that it can be reused when printing statistics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a simple filtering of statistics, that allows to retrieve
statistics for a subset of the guest vCPUs. This will be used for
example by the HMP monitor, in order to retrieve the statistics
for the currently selected CPU.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gathering statistics is important for development, for monitoring and
for performance measurement. There are tools such as kvm_stat that do
this and they rely on the _user_ knowing the interesting data points
rather than the tool (which can treat them as opaque).
The commands introduced in this commit introduce QMP support for
querying stats; the goal is to take the capabilities of these tools
and making them available throughout the whole virtualization stack,
so that one can observe, monitor and measure virtual machines without
having shell access + root on the host that runs them.
query-stats returns a list of all stats per target type (only VM
and vCPU to start); future commits add extra options for specifying
stat names, vCPU qom paths, and providers. All these are used by the
HMP command "info stats". Because of the development usecases around
statistics, a good HMP interface is important.
query-stats-schemas returns a list of stats included in each target
type, with an option for specifying the provider. The concepts in the
schema are based on the KVM binary stats' own introspection data, just
translated to QAPI.
There are two reasons to have a separate schema that is not tied to
the QAPI schema. The first is the contents of the schemas: the new
introspection data provides different information than the QAPI data,
namely unit of measurement, how the numbers are gathered and change
(peak/instant/cumulative/histogram), and histogram bucket sizes.
There's really no reason to have this kind of metadata in the QAPI
introspection schema (except possibly for the unit of measure, but
there's a very weak justification).
Another reason is the dynamicity of the schema. The QAPI introspection
data is very much static; and while QOM is somewhat more dynamic,
generally we consider that to be a bug rather than a feature these days.
On the other hand, the statistics that are exposed by QEMU might be
passed through from another source, such as KVM, and the disadvantages of
manually updating the QAPI schema for outweight the benefits from vetting
the statistics and filtering out anything that seems "too unstable".
Running old QEMU with new kernel is a supported usecase; if old QEMU
cannot expose statistics from a new kernel, or if a kernel developer
needs to change QEMU before gathering new info from the new kernel,
then that is a poor user interface.
The framework provides a method to register callbacks for these QMP
commands. Most of the work in fact is done by the callbacks, and a
large majority of this patch is new QAPI structs and commands.
Examples (with KVM stats):
- Query all VM stats:
{ "execute": "query-stats", "arguments" : { "target": "vm" } }
{ "return": [
{ "provider": "kvm",
"stats": [
{ "name": "max_mmu_page_hash_collisions", "value": 0 },
{ "name": "max_mmu_rmap_size", "value": 0 },
{ "name": "nx_lpage_splits", "value": 148 },
... ] },
{ "provider": "xyz",
"stats": [ ... ] }
] }
- Query all vCPU stats:
{ "execute": "query-stats", "arguments" : { "target": "vcpu" } }
{ "return": [
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[0]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[1]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
] }
- Retrieve the schemas:
{ "execute": "query-stats-schemas" }
{ "return": [
{ "provider": "kvm",
"target": "vcpu",
"stats": [
{ "name": "guest_mode",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "instant" },
{ "name": "directed_yield_successful",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "cumulative" },
... ]
},
{ "provider": "kvm",
"target": "vm",
"stats": [
{ "name": "max_mmu_page_hash_collisions",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "peak" },
... ]
},
{ "provider": "xyz",
"target": "vm",
"stats": [ ... ]
}
] }
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The returned value is not used and misleading.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The macro seems to be used only internally, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-4-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Exposing the io_base offset as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
iobase = 112 (0x70)
irq = 8 (0x8)
lost_tick_policy = "discard"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220529184006.10712-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix3_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-11-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During the previous changesets piix4_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Just like the real hardware, create the PIIX4 ACPI controller as part of
the PIIX4 southbridge. This also mirrors how the IDE and USB functions
are already created.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-7-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining
ones, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220603185045.143789-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is now unused and so can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Initialize the SMI IRQ in piix4_pm_init().
The smi_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce piix4_pm_init() instance init function and use it to
initialise the separate qdev gpio for the SCI IRQ.
The sci_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be
mapped outside of piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is in preparation for conversion to a qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220528091934.15520-3-mark.cave-ayland@ilande.co.uk>
[PMD: Change simm_enabled from int to bool, suggested by Ani Sinha]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo)
don't support DMA. The core floppy controller code expects this to
be indicated by setting FDCtrl::dma_chann to -1. This used to be
done in the device instance_init functions sysbus_fdc_initfn() and
sun4m_fdc_initfn(), but in commit 1430759ec3 we refactored this code
and accidentally lost the setting of dma_chann.
For sysbus-fdc this has no ill effects because we were redundantly
also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo
this means that guests which try to enable DMA on the floppy
controller will cause QEMU to crash because FDCtrl::dma is NULL.
Set dma_chann to -1 in the common instance init, and remove the
redundant code in fdctrl_init_sysbus() that is also setting it.
There is a six-year-old FIXME comment in the jazz board code to the
effect that in theory it should support doing DMA via a custom DMA
controller. If anybody ever chooses to fix that they can do it by
adding support for setting both FDCtrl::dma_chann and FDCtrl::dma.
(A QOM link property 'dma-controller' on the sysbus device which can
be set to an instance of IsaDmaClass is probably the way to go.)
Fixes: 1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220505101842.2757905-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As all the CXL elements have moved to boards that support
CXL, there is no need to maintain a top level flag.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This removes the last of the CXL code from the MachineState where it
is visible to all Machines to only those that support CXL (currently i386/pc)
As i386/pc always support CXL now, stop allocating the state independently.
Note the pxb register hookup code runs even if cxl=off in order to detect
pxb_cxl host bridges and fail to start if any are present as they won't
have the control registers available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the CXLState will no long be accessible via MachineState
at time of PXB_CXL realization, come back later from the machine specific
code to fill in the missing memory region setup. Only at this stage
is it possible to check if cxl=on, so that check is moved to this
later point.
Note that for multiple host bridges, the allocation order of the
register spaces is changed. This will be reflected in ACPI CEDT.
Stubs are added to handle case of CONFIG_PXB=n for machines that
call these functions.
The bus walking logic is common to all machines so add a utility
function + stub to cxl-host*.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst here take the oportunity to shorten the function name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refactoring step on path to moving all CXL state out of
MachineState.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. and clean up not longer needed conditionals in DSTD build code
pvpanic-isa AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. and clean up not longer needed conditionals in DSTD build
code. applesmc AML will be fetched and included when ISA bridge
will build its own AML code (incl. attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
by default we do not version ACPI AML as it's considered
a part of firmware. Drop do_not_add_smb_acpi that blocked
SMBUS AML description on 3.1 and older machine types without
providing justification.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
convert ad-hoc way we use to generate AML for ISA/SMB IPMI devices
to a generic approach (i.e. make devices provide its own AML blobs
like it is done with other ISA devices (ex. KBD))
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smbus-ipmi AML description needs to specify a path to its parent
node in _CRS. The rest of IPMI inplementations (ISA based)
do not need path at all. Instead of passing through a full path
use relative path to point to smbus-ipmi's parent node, it will
let follow up patches to create IPMI device AML in a generic
way instead of current ad-hoc way. (i.e. AML will be generated
the same way it's done for other ISA device, and smbus will be
converted to generate AML for its slave devices the same way
as ISA)
expected AML change:
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
- AddressingMode7Bit, "\\_SB.PCI0.SMB0",
+ AddressingMode7Bit, "^",
0x00, ResourceProducer, , Exclusive,
)
})
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is already ISADeviceClass::build_aml() callback which
builds device specific AML blob for some ISA devices.
To extend the same idea to other devices, add TYPE_ACPI_DEV_AML_IF
Interface that will provide a more generic callback which
will be used not only for ISA but other devices. It will
allow get rid of some data-mining and ad-hoc AML building,
by asking device(s) to generate its own AML blob like it's
done for ISA devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Various loader functions return an int which limits images to 2GB which
is fine for things like a BIOS/kernel image, but if we want to be able
to load memory images or large ramdisks then any file over 2GB would
silently fail to load.
Cc: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function was declared in a generic and public header, implemented
in a device-specific source file but only used in xen_platform. Given its
'aux' parameter, this function is more xen-specific than piix-specific.
Also, the hardcoded magic constants seem to be generic and related to
PCIIDEState and IDEBus rather than piix.
Therefore, move this function to xen_platform, unexport it, and drop the
"piix3" in the function name as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220513180957.90514-4-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Add a periodic timer which raises vblank at a frequency of 30Hz.
Note that this is a migration compatibility break for the
xlnx-zcu102 board type.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-3-fkonrad@xilinx.com
Changes by fkonrad:
- Switched to transaction-based ptimer API.
- Added the DP_INT_VBLNK_START macro.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
[PMM: bump vmstate version, add commit message note about
compat break]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The core and the vblend registers size are wrong, they should respectively be
0x3B0 and 0x1E0 according to:
https://www.xilinx.com/htmldocs/registers/ug1087/ug1087-zynq-ultrascale-registers.html.
Let's fix that and use macros when creating the mmio region.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-2-fkonrad@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add ls7a rtc device support.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-39-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1.Add uart,virtio-net,vga and usb for 3A5000.
2.Add irq set and map for the pci host. Non pci device
use irq 0-16, pci device use 16-64.
3.Add some unimplented device to emulate guest unused
memory space.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-38-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the EIOINTC interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-35-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize PCH-MSI interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-34-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the PCH-PIC interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-33-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch realize the IPI interrupt controller.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-32-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds support for disassembling via option '-d in_asm'.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-17-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU execution should be suspended when new BH is scheduled.
This is needed to avoid guest timeouts caused by the long cycles
of the execution. In replay mode execution may hang when
vCPU sleeps and block event comes to the queue.
This patch adds notification which wakes up vCPU or interrupts
execution of guest code.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
--
v2: changed first_cpu to current_cpu (suggested by Richard Henderson)
v4: moved vCPU notification to aio_bh_enqueue (suggested by Paolo Bonzini)
Message-Id: <165364837317.688121.17680519919871405281.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add an interface to perform moves between TCGv_ptr.
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.
This essentially reverts commit 4dd8a7064b
("vmbus: add infrastructure to save/load vmbus requests").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
The function is required by get_relocated_path() (already in cutils),
and used by qemu-ga and may be generally useful.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-2-marcandre.lureau@redhat.com>
-machine graphics=off is the usual way to tell the firmware or the OS that the
user wants a serial console. The pseries machine however does not support
this, and never adds the stdout-path node to the device tree if a VGA device
is provided. This is in addition to the other magic behavior of VGA devices,
which is to add a keyboard and mouse to the default USB bus.
Split spapr->has_graphics in two variables so that the two behaviors can be
separated: the USB devices remains the same, but the stdout-path is added
even with "-device VGA -machine graphics=off".
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220507054826.124936-1-pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce new akcipher crypto class 'QCryptoAkCIpher', which supports
basic asymmetric operations: encrypt, decrypt, sign and verify.
Suggested by Daniel P. Berrangé, also add autoptr cleanup for the new
class. Thanks to Daniel!
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It did not support GPIO index mode for read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220525053444.27228-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2400 and AST2500 have 5 UART's, while the AST2600 and AST1030 have 13.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds the missing UART memory and IRQ mappings for the AST2400, AST2500,
AST2600, and AST1030.
This also includes the new UART interfaces added in the AST2600 and AST1030
from UART6 to UART13. The addresses and interrupt numbers for these two
later chips are identical.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and make routine aspeed_soc_get_irq() common to all SoCs. This will be
useful to share code.
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Cc: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516055620.2380197-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
* Improve the cleanup of the QEMU binary in case of failing qtests
* Update the Windows support statement
* Remove the capstone submodule (and rely on Capstone of the distros instead)
-----BEGIN PGP SIGNATURE-----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=z6e9
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-05-18' of https://gitlab.com/thuth/qemu into staging
* Remove Ubuntu 18.04 containers (not supported anymore)
* Improve the cleanup of the QEMU binary in case of failing qtests
* Update the Windows support statement
* Remove the capstone submodule (and rely on Capstone of the distros instead)
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmKEovQRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXXtxAAsjL2M/kUcr1KBSfkaMhTa0D3OKPQ+p/e
# Bac/9+l7UhZZLLffzg53lSsCmlj9cSr5cVUkooT7IFS03wauH7ZJ/wuefIS8IYED
# jREmeMWXmVTTfQo4QQZ+6T+XknG2DWjzXQ3sNat71LH4RbHXO5um3zYIdDUaujP+
# v4sAKKH+F/FUsEXMP1rFmZpkaWOcvsuSwP/H4kEfhlovebAZINPow26eYYRrTM2t
# Ifs7HelO12TlmqlBFn0UzHj8bV8MZkqcjj0efocVzuYMQ8DVcxE7IPc3tft2PuUu
# Ia+Czh1hLsLA1zYiO/nN9bVIIewFGOErASzjlYWUlQwNRc1nLik+m+p4Cl9WOEhL
# JpkN/yY3pTI5uC6a4KgxDQGTeFUR4D5la6Hg7yQjQbTBMEeGFCV50iOdkItdnRBx
# ByReVctXS3oIhsDqHMb8qydlBkPp5pUrAXdj43IBCUb3UsrHmCxH+z8U5BhHvv4D
# OleykLKyMcuff6HcEpC1fBQNIFJX5uS69EtAXYtyo2kb5zAJWezCv65UPldAZJCT
# kRT4beueQ+d5t+4LZn1qNePdoyeFArdCLlOqg/3Fx08kM5eEv22pSQhOtWclE7U3
# tgorikFybClvKJ+YnXBAxD7oFKe+h9L+RYCFOgoTebrbMX54IjjJfeo2DydhHTt7
# IaJnsI+vvAA=
# =z6e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 12:40:36 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-05-18' of https://gitlab.com/thuth/qemu:
capstone: Remove the capstone submodule
capstone: Allow version 3.0.5 again
tests/vm: Add capstone to the NetBSD and OpenBSD VMs
docs/about: Update the support statement for Windows
tests/qtest: use prctl(PR_SET_PDEATHSIG) as fallback to kill QEMU
tests/qtest: fix registration of ABRT handler for QEMU cleanup
Remove Ubuntu 18.04 container support from the repository
gitlab-ci: Switch the container of the 'check-patch' & 'check-dco' jobs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The traditional ptimer behaviour includes a collection of weird edge
case behaviours. In 2016 we improved the ptimer implementation to
fix these and generally make the behaviour more flexible, with
ptimers opting in to the new behaviour by passing an appropriate set
of policy flags to ptimer_init(). For backwards-compatibility, we
defined PTIMER_POLICY_DEFAULT (which sets no flags) to give the old
weird behaviour.
This turns out to be a poor choice of name, because people writing
new devices which use ptimers are misled into thinking that the
default is probably a sensible choice of flags, when in fact it is
almost always not what you want. Rename PTIMER_POLICY_DEFAULT to
PTIMER_POLICY_LEGACY and beef up the comment to more clearly say that
new devices should not be using it.
The code-change part of this commit was produced by
sed -i -e 's/PTIMER_POLICY_DEFAULT/PTIMER_POLICY_LEGACY/g' $(git grep -l PTIMER_POLICY_DEFAULT)
with the exception of a test name string change in
tests/unit/ptimer-test.c which was added manually.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220516103058.162280-1-peter.maydell@linaro.org
Except hw/core/irq.c which implements the forward-declared opaque
qemu_irq structure, hw/adc/zynq-xadc.{c,h} are the only files not
using the typedef. Fix this single exception.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20220509202035.50335-1-philippe.mathieu.daude@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
The GICv3 code has always supported a configurable number of virtual
priority and preemption bits, but our implementation currently
hardcodes the number of physical priority bits at 8. This is not
what most hardware implementations provide; for instance the
Cortex-A53 provides only 5 bits of physical priority.
Make the number of physical priority/preemption bits driven by fields
in the GICv3CPUState, the way that we already do for virtual
priority/preemption bits. We set cs->pribits to 8, so there is no
behavioural change in this commit. A following commit will add the
machinery for CPUs to set this to the correct value for their
implementation.
Note that changing the number of priority bits would be a migration
compatibility break, because the semantics of the icc_apr[][] array
changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-5-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-4-peter.maydell@linaro.org
Our support statement for Windows currently talks about "Vista / Server
2008" - which is related to the API of Windows, and this is not easy
to understand for the non-technical users. Additionally, glib sets the
_WIN32_WINNT macro to 0x0601 already, which indicates the Windows 7 API,
so QEMU effectively depends on the Windows 7 API, too.
Thus let's bump the _WIN32_WINNT setting in QEMU to the same level as
glib uses and adjust our support statement in the documentation to
something similar that we're using for Linux and the *BSD systems
(i.e. only the two most recent versions), which should hopefully be
easier to understand for the users now.
And since we're nowadays also compile-testing QEMU with MSYS2 on Windows
itself, I think we could mention this build environment here, too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/880
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220513063958.1181443-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
=xdSk
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
=n4lu
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix WHPX debugging
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
# oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
# X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
# sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
# szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
# xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
# =n4lu
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 03:34:06 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
configure: remove duplicate help messages
configure: remove another dead variable
build: remove useless dependency
introduce -audio as a replacement for -soundhw
soundhw: move help handling to vl.c
soundhw: unify initialization for ISA and PCI soundhw
soundhw: extract soundhw help to a separate function
soundhw: remove ability to create multiple soundcards
rng: make opened property read-only
crypto: make loaded property read-only
target/i386: Support Arch LBR in CPUID enumeration
target/i386: introduce helper to access supported CPUID
target/i386: Enable Arch LBR migration states in vmstate
target/i386: Add MSR access interface for Arch LBR
target/i386: Add XSAVES support for Arch LBR
target/i386: Enable support for XSAVES based features
target/i386: Add kvm_get_one_msr helper
target/i386: Add lbr-fmt vPMU option to support guest LBR
qdev-properties: Add a new macro with bitmask check for uint64_t property
i386/cpu: Remove the deprecated cpu model 'Icelake-Client'
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Legacy PIC (8259) cannot be supported for TDX guests since TDX module
doesn't allow directly interrupt injection. Using posted interrupts
for the PIC is not a viable option as the guest BIOS/kernel will not
do EOI for PIC IRQs, i.e. will leave the vIRR bit set.
Make PIC the property of common x86 machine type. Hence all x86
machines, including microvm, can disable it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both pc and microvm have pit property individually. Let's just make it
the property of common x86 base machine type.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-2-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to 7.2.2 in [1] bit 27 is the last bit that can be part of the
bus number, this makes the ECAM max size equal to '1 << 28'. This patch
restores back this value into the PCIE_MMCFG_SIZE_MAX define (which was
changed in commit 58d5b22bbd ("ppc4xx: Add device models found in PPC440
core SoCs")).
[1] PCI Express® Base Specification Revision 5.0 Version 1.0
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220411221836.17699-3-frasse.iglesias@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to [1] address bits 27 - 20 are mapped to the bus number (the
TLPs bus number field is 8 bits). Below is the formula taken from Table
7-1 in [1].
"
Memory Address | PCI Express Configuration Space
A[(20+n-1):20] | Bus Number, 1 ≤ n ≤ 8
"
[1] PCI Express® Base Specification Revision 5.0 Version 1.0
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220411221836.17699-2-frasse.iglesias@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For CONFIG_LINUX, implement the new zero copy flag and the optional callback
io_flush on QIOChannelSocket, but enables it only when MSG_ZEROCOPY
feature is available in the host kernel, which is checked on
qio_channel_socket_connect_sync()
qio_channel_socket_flush() was implemented by counting how many times
sendmsg(...,MSG_ZEROCOPY) was successfully called, and then reading the
socket's error queue, in order to find how many of them finished sending.
Flush will loop until those counters are the same, or until some error occurs.
Notes on using writev() with QIO_CHANNEL_WRITE_FLAG_ZERO_COPY:
1: Buffer
- As MSG_ZEROCOPY tells the kernel to use the same user buffer to avoid copying,
some caution is necessary to avoid overwriting any buffer before it's sent.
If something like this happen, a newer version of the buffer may be sent instead.
- If this is a problem, it's recommended to call qio_channel_flush() before freeing
or re-using the buffer.
2: Locked memory
- When using MSG_ZERCOCOPY, the buffer memory will be locked after queued, and
unlocked after it's sent.
- Depending on the size of each buffer, and how often it's sent, it may require
a larger amount of locked memory than usually available to non-root user.
- If the required amount of locked memory is not available, writev_zero_copy
will return an error, which can abort an operation like migration,
- Because of this, when an user code wants to add zero copy as a feature, it
requires a mechanism to disable it, so it can still be accessible to less
privileged users.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-4-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add flags to io_writev and introduce io_flush as optional callback to
QIOChannelClass, allowing the implementation of zero copy writes by
subclasses.
How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().
Notes:
As some zero copy write implementations work asynchronously, it's
recommended to keep the write buffer untouched until the return of
qio_channel_flush(), to avoid the risk of sending an updated buffer
instead of the buffer state during write.
As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.
Also, some functions like qio_channel_writev_full_all() were adapted to
receive a flag parameter. That allows shared code between zero copy and
non-zero copy writev, and also an easier implementation on new flags.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At a couple of hundred bytes per notifier allocating one for every
potential queue is very wasteful as most devices only have a few
queues. Instead of having this handled statically dynamically assign
them and track in a GPtrArray.
[AJB: it's hard to trigger the vhost notifiers code, I assume as it
requires a KVM guest with appropriate backend]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While trying to get my head around the nest of interactions for vhost
devices I though I could start by documenting the key API functions.
This patch documents the main API hooks for creating and starting a
vhost device as well as how the configuration changes are handled.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220321153037.3622127-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows other device classes that will be exposed via PCI to be
able to do so in the appropriate hw/ directory. I resisted the
temptation to re-order headers to be more aesthetically pleasing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200925125147.26943-4-alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By setting none of the SAGAW bits we can indicate to a guest that DMA
translation isn't supported. Tested by booting Windows 10, as well as
Linux guests with the fix at https://git.kernel.org/torvalds/c/c40aaaac10
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220314142544.150555-2-dwmw2@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DEFINE_PROP_UINT64_CHECKMASK maro applies certain mask check agaist
user-supplied property value, reject the value if it violates the bitmask.
Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update to c5eb0a61238d ("Linux 5.18-rc6"). Mechanical search and
replace of vfio defines with white space massaging.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These memops perform interleave decoding, walking down the
CXL topology from CFMWS described host interleave
decoder via CXL host bridge HDM decoders, through the CXL
root ports and finally call CXL type 3 specific read and write
functions.
Note that, whilst functional the current implementation does
not support:
* switches
* multiple HDM decoders at a given level.
* unaligned accesses across the interleave boundaries
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20220429144110.25167-34-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed. These functions peform the required maths
and then use a device specific address space to access the
hostmem->mr to fullfil the actual operation. Note that failed writes
are silent, but failed reads return poison. Note this is based
loosely on:
https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses
Only lightly tested so far. More complex test cases yet to be written.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-33-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accessor to get hold of the cxl state for a CXL host bridge
without exposing the internals of the implementation.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-32-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simple function to search a PCIBus to find a port by
it's port number.
CXL interleave decoding uses the port number as a target
so it is necessary to locate the port when doing interleave
decoding.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-31-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both registers and the CFMWS entries in CDAT use simple encodings
for the number of interleave ways and the interleave granularity.
Introduce simple conversion functions to/from the unencoded
number / size. So far the iw decode has not been needed so is
it not implemented.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-27-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.
CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.
CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.
There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.
As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.
Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-26-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO. This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.
Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-24-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement get and set handlers for the Label Storage Area
used to hold data describing persistent memory configuration
so that it can be ensured it is seen in the same configuration
after reboot.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-22-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This should introduce no change. Subsequent work will make use of this
new class member.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-21-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.
Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).
Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.
The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This works like adding a typical pxb device, except the name is
'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as
follows:
-device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1
A CXL PXB is backward compatible with PCIe. What this means in practice
is that an operating system that is unaware of CXL should still be able
to enumerate this topology as if it were PCIe.
One can create multiple CXL PXB host bridges, but a host bridge can only
be connected to the main root bus. Host bridges cannot appear elsewhere
in the topology.
Note that as of this patch, the ACPI tables needed for the host bridge
(specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't
created. So while this patch internally creates it, it cannot be
properly used by an operating system or other system software.
Also necessary is to add an exception to scripts/device-crash-test
similar to that for exiting pxb as both must created on a PCIexpress
host bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-15-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The easiest way to differentiate a CXL bus, and a PCIE bus is using a
flag. A CXL bus, in hardware, is backward compatible with PCIE, and
therefore the code tries pretty hard to keep them in sync as much as
possible.
The other way to implement this would be to try to cast the bus to the
correct type. This is less code and useful for debugging via simply
looking at the flags.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-13-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Errata F4 to CXL 2.0 clarified the meaning of the timer as the
sum of the value set with the timestamp set command and the number
of nano seconds since it was last set.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.
A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.
Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.
No commands are implemented yet.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.
Endianness and alignment are managed by softmmu memory core.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL device is a type of CXL component. Conceptually, a CXL device
would be a leaf node in a CXL topology. From an emulation perspective,
CXL devices are the most complex and so the actual implementation is
reserved for discrete commits.
This new device type is specifically catered towards the eventual
implementation of a Type3 CXL.mem device, 8.2.8.5 in the CXL 2.0
specification.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL 2.0 component is any entity in the CXL topology. All components
have a analogous function in PCIe. Except for the CXL host bridge, all
have a PCIe config space that is accessible via the common PCIe
mechanisms. CXL components are enumerated via DVSEC fields in the
extended PCIe header space. CXL components will minimally implement some
subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
2.0 specification. Two headers and a utility library are introduced to
support the minimum functionality needed to enumerate components.
The cxl_pci header manages bits associated with PCI, specifically the
DVSEC and related fields. The cxl_component.h variant has data
structures and APIs that are useful for drivers implementing any of the
CXL 2.0 components. The library takes care of making use of the DVSEC
bits and the CXL.[mem|cache] registers. Per spec, the registers are
little endian.
None of the mechanisms required to enumerate a CXL capable hostbridge
are introduced at this point.
Note that the CXL.mem and CXL.cache registers used are always 4B wide.
It's possible in the future that this constraint will not hold.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL component is a hardware entity that implements CXL component
registers from the CXL 2.0 spec (8.2.3). Currently these represent 3
general types.
1. Host Bridge
2. Ports (root, upstream, downstream)
3. Devices (memory, other)
A CXL component can be conceptually thought of as a PCIe device with
extra functionality when enumerated and enabled. For this reason, CXL
does here, and will continue to add on to existing PCI code paths.
Host bridges will typically need to be handled specially and so they can
implement this newly introduced interface or not. All other components
should implement this interface. Implementing this interface allows the
core PCI code to treat these devices as special where appropriate.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The next patch wants to adjust whether the NBD server code advertises
MULTI_CONN based on whether it is known if the server limits to
exactly one client. For a server started by QMP, this information is
obtained through nbd_server_start (which can support more than one
export); but for qemu-nbd (which supports exactly one export), it is
controlled only by the command-line option -e/--shared. Since we
already have a hook function used by qemu-nbd, it's easiest to just
alter its signature to fit our needs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220512004924.417153-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_co_queue_restart_all is basically the same as qemu_co_enter_all
but without a QemuLockable argument. That's perfectly fine, but only as
long as the function is marked coroutine_fn. If used outside coroutine
context, qemu_co_queue_wait will attempt to take the lock and that
is just broken: if you are calling qemu_co_queue_restart_all outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker to qemu_co_queue_restart_all and to its sole
non-coroutine_fn caller; it then reimplements the function in terms of
qemu_co_enter_all_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because qemu_co_queue_restart_all does not release the lock, it should
be used only in coroutine context. Introduce a new function that,
like qemu_co_enter_next, does release the lock, and use it whenever
qemu_co_queue_restart_all was used outside coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_co_queue_next is basically the same as qemu_co_enter_next but
without a QemuLockable argument. That's perfectly fine, but only
as long as the function is marked coroutine_fn. If used outside
coroutine context, qemu_co_queue_wait will attempt to take the lock
and that is just broken: if you are calling qemu_co_queue_next outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker and reimplements qemu_co_queue_next in terms of
qemu_co_enter_next_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle HostMemoryBackend creation and setting of ms->ram entirely in
machine_run_board_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -boot syntactic sugar for a compound property "-machine boot.{order,menu,...}".
machine_boot_parse is replaced by the setter for the property.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's true that these functions currently affect the batch size in which
coroutines are reused (i.e. moved from the global release pool to the
allocation pool of a specific thread), but this is a bug and will be
fixed in a separate patch.
In fact, the comment in the header file already just promises that it
influences the pool size, so reflect this in the name of the functions.
As a nice side effect, the shorter function name makes some line
wrapping unnecessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
igd-passthrough-isa-bridge is only requested in xen_pt but was
implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc
which is hereby resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-2-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
=t5eR
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-scsi: move request-related items from .h to .c
virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio-scsi: don't waste CPU polling the event virtqueue
virtio-scsi: fix ctrl and event handler functions in dataplane mode
util/event-loop-base: Introduce options to set the thread pool size
util/main-loop: Introduce the main loop into QOM
Introduce event-loop-base abstract class
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.
Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).
Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.
Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.
Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():
$ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
--object iothread,id=iothread0 \
--device virtio-scsi-pci,iothread=iothread0 \
--blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
--device scsi-hd,drive=drive0
After this patch CPU is no longer wasted.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'event-loop-base' provides basic property handling for all 'AioContext'
based event loops. So let's define a new 'MainLoopClass' that inherits
from it. This will permit tweaking the main loop's properties through
qapi as well as through the command line using the '-object' keyword[1].
Only one instance of 'MainLoopClass' might be created at any time.
'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to
mark 'MainLoop' as non-deletable.
[1] For example:
-object main-loop,id=main-loop,aio-max-batch=<value>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-3-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the 'event-loop-base' abstract class, it'll hold the
properties common to all event loops and provide the necessary hooks for
their creation and maintenance. Then have iothread inherit from it.
EventLoopBaseClass is defined as user creatable and provides a hook for
its children to attach themselves to the user creatable class 'complete'
function. It also provides an update_params() callback to propagate
property changes onto its children.
The new 'event-loop-base' class will live in the root directory. It is
built on its own using the 'link_whole' option (there are no direct
function dependencies between the class and its children, it all happens
trough 'constructor' magic). And also imposes new compilation
dependencies:
qom <- event-loop-base <- blockdev (iothread.c)
And in subsequent patches:
qom <- event-loop-base <- qemuutil (util/main-loop.c)
All this forced some amount of reordering in meson.build:
- Moved qom build definition before qemuutil. Doing it the other way
around (i.e. moving qemuutil after qom) isn't possible as a lot of
core libraries that live in between the two depend on it.
- Process the 'hw' subdir earlier, as it introduces files into the
'qom' source set.
No functional changes intended.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-2-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.
The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.
This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.
Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220505173619.488350-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler, so
we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the LASI device implementation from hw/hppa to hw/misc so that it is
located with all the other miscellaneous devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
located with all the other PCI host bridges.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-23-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The pcspk device is the only user of the init_isa function, and the only
-soundhw option which does not create a new device (it hacks into the
PCSpkState by hand). Remove it, since it was deprecated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.
no functional change intended
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When pulling or pushing an OS context from/to a CPU, we should
re-evaluate the state of the External interrupt signal. Otherwise, we
can end up catching the External interrupt exception in hypervisor
mode, which is unexpected.
The problem is best illustrated with the following scenario:
1. an External interrupt is raised while the guest is on the CPU.
2. before the guest can ack the External interrupt, an hypervisor
interrupt is raised, for example the Hypervisor Decrementer or
Hypervisor Virtualization interrupt. The hypervisor interrupt forces
the guest to exit while the External interrupt is still pending.
3. the hypervisor handles the hypervisor interrupt. At this point, the
External interrupt is still pending. So it's very likely to be
delivered while the hypervisor is running. That's unexpected and can
result in an infinite loop where the hypervisor catches the External
interrupt, looks for an interrupt in its hypervisor queue, doesn't
find any, exits the interrupt handler with the External interrupt
still raised, repeat...
The fix is simply to always lower the External interrupt signal when
pulling an OS context. It means it needs to be raised again when
re-pushing the OS context. Fortunately, it's already the case, as we
now always call xive_tctx_ipb_update(), which will raise the signal if
needed.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This reverts commit b1c0734905. (We
wanted to do so once the 7.1 tree opens, which has happened. The issue
reported in https://gitlab.com/qemu-project/qemu/-/issues/945 should be
fixed by the preceding patches.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is safe to call in an I/O context, and qcow2_do_open()
does so (invoked in an I/O context by qcow2_co_invalidate_cache()).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220412165836.355850-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Swap half-words (16-bit) and words (32-bit) within a larger value.
Mirrors functions of the same names within include/qemu/bitops.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Miller <dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The function isn't used outside of qio_channel_command_new_spawn(),
which is !win32-specific.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GLib g_unix_open_pipe() is essentially like qemu_pipe(), available since
2.30.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Per ast1030_v7.pdf, AST1030 HACE engine is identical to AST2600's HACE
engine.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The aspeed ast2600 accumulative mode is described in datasheet
ast2600v10.pdf section 25.6.4:
1. Allocating and initiating accumulative hash digest write buffer
with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial
state of hash library, and the initial state is already set by
crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add
padding message at the end of the accumulative data. Padding
message described in specific of MD5, SHA-1, SHA224, SHA256,
SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the
padding message internally.
* This patch is to remove the padding message which fed byguest
machine driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Support HACE28: Hash HMAC Key Buffer Base Address Register.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The embedded core of AST1030 SoC is ARM Coretex M4.
It is hard to be integrated in the common Aspeed Soc framework.
We introduce a new ast1030 class with instance_init and realize
handlers.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ]
Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v07.pdf, AST1030 SOC doesn't have SCU300, the pclk divider
selection is defined in SCU310[11:8].
Add a get_apb_freq function and a class init handler for ast1030.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-7-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ast1030 tmc(timer controller) is identical to ast2600 tmc.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 wdt controller is similiar to AST2600's wdt, but it has extra
registers.
Introduce ast1030 object class and increse the number of regs(offset) of
ast1030 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-5-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast2500_2520_datasheet_v1.8 and ast2600v11.pdf, the default value of
WDT00 and WDT04 is 0x014FB180 for ast2500/ast2600.
Add default_status and default_reload_value attributes for storing
counter status and reload value as they are different from ast2400.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v7.pdf, AST1030 ADC engine is identical to AST2600's ADC.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-2-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Guest code (u-boot) pokes at this on boot. No functionality is required
for guest code to work correctly, but it helps to document the region
being read from.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220318092211.723938-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute
for aspeed_scu_get_clkin() to return the correct clkin for ast2600.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a platform bus to allow dynamic devices to be connected. This is
based on the ARM implementation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ARM virt machine currently uses sysbus-fdt to create device tree
entries for dynamically created MMIO devices.
The RISC-V virt machine can also benefit from this, so move the code to
the core directory.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the binary and device tree loading code to the machine done
notifier. This allows us to prepare for editing the device tree as part
of the notifier.
This is based on similar code in the ARM virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- share it between target/arm and target/riscv
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
-----BEGIN PGP SIGNATURE-----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=IPEn
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJqpu4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pOQD/9G190+ntJm4Vndz0I6bCDP
# svDrWwsioOJ4q5Pah6517JACkwN5sx0adMGyAeRC3Kcbz5B2141vv9hJOnJmLB1D
# l6KbH8XZaftC0B8fXsPkaH6XEdBHGz6YbOZaLOTwmFqF9d18OFW4d8+CAvfldZRc
# +DYeolEhoL9eLTS16BlXPxb0LajQHhbN1Xdu3t8CGh31C52ZrG4h8cus6YMEDjfA
# rfBthh/2QvVFmDedIfX4QrlImCTs+bTaSkhUBmX6qakWII0QykItgQTEZ8IHEr8/
# QmG+xlkP1MmffyHU3F4inEVXpjCSzula4ycZpNVGsrTHYxLBzsTSD+EzicLHMZSt
# 64tQhLxPjAzC1MEHp7bJHyQXon7REWd6u1jPRlMWTGpZqbMMchBPjFrsxK3YPdvi
# a/8KIulXuX+GjzbOIHnpttIy+U0UrjTEyxjpk+Ay2iZ+U6+hA3i2ni++dzq9dYb6
# IiCl+o29r/7fNaWpG3b38kn9vpxjwAAw+qfwwSqyM+8/KMirgJ8rpEmUPei/h7fy
# vqpNlVxd1+Tzb3ljCXNRriZ05xo5I9LIb+dLAig1orENS7w3SzW/GnM+S7raOwQb
# u9mxNmbQJ1MhkjNC/6wzniBre6EBs31X2GIWeuiWe/js2YFPQC06b1WwIc/bYNUv
# anbECOS34mtxbExFfdlxUQ==
# =IPEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Apr 2022 07:38:38 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm: (54 commits)
hw/arm/smmuv3: Advertise support for SMMUv3.2-BBML2
target/arm: Advertise support for FEAT_BBM level 2
target/arm: Advertise support for FEAT_TTL
hw/arm/smmuv3: Add space in guest error message
hw/arm/smmuv3: Cache event fault record
target/arm: Use field names for accessing DBGWCRn
target/arm: Disable cryptographic instructions when neon is disabled
target/arm: Use tcg_constant for vector descriptor
target/arm: Use tcg_constant for do_brk{2,3}
target/arm: Use tcg_constant for predicate descriptors
target/arm: Use tcg_constant in do_zzi_{sat, ool}, do_fp_imm
target/arm: Use tcg_constant in SUBR
target/arm: Use tcg_constant in LD1, ST1
target/arm: Use tcg_constant in WHILE
target/arm: Use tcg_constant in do_clast_scalar
target/arm: Use tcg_constant in {incr, wrap}_last_active
target/arm: Use tcg_constant in FCPY, CPY
target/arm: Use tcg_constant in SINCDEC, INCDEC
target/arm: Use tcg_constant for trans_INDEX_*
target/arm: Use tcg_constant in trans_CSEL
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Record bit in the Context Descriptor tells the SMMU to report fault
events to the event queue. Since we don't cache the Record bit at the
moment, access faults from a cached Context Descriptor are never
reported. Store the Record bit in the cached SMMUTransCfg.
Fixes: 9bde7f0674 ("hw/arm/smmuv3: Implement translate callback")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220427111543.124620-1-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move sev firmware setup to separate function so it can be used from
other code paths. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-3-kraxel@redhat.com>
Add possibility to change addresses where VNC server listens for new
connections. Prior to 6.0 this functionality was available through
'change' qmp command which was deleted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-3-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
=I1yM
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb into staging
nbd patches for 2022-04-26
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
# Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
# rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
# Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
# Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
# 5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
# jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
# =I1yM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Apr 2022 01:12:00 PM PDT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
* tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb:
nbd: document what is protected by the CoMutexes
nbd: take receive_mutex when reading requests[].receiving
nbd: move s->state under requests_lock
nbd: code motion and function renaming
nbd: use a QemuMutex to synchronize yanking, reconnection and coroutines
nbd: keep send_mutex/free_sema handling outside nbd_co_do_establish_connection
nbd: remove peppering of nbd_client_connected
nbd: mark more coroutine_fns
nbd: safeguard against waking up invalid coroutine
iotests/223: check new possibility of exporting bitmaps by node/name
qapi: nbd-export: allow select bitmaps by node/name pair
qapi: rename BlockDirtyBitmapMergeSource to BlockDirtyBitmapOrStr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement nios2 Vectored Interrupt Controller (VIC).
VIC is connected to EIC. It needs to update rha, ril, rrs and rnmi
fields on Nios2CPU before raising an IRQ.
For that purpose, VIC has a "cpu" property which should refer to the
nios2 cpu and set by the board that connects VIC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-5-amir.gonnen@neuroblade.ai>
[rth: Split out nios2_vic.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-60-richard.henderson@linaro.org>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org
In several places in virt.c we calculate the number of redistributors that
fit in a region of our memory map, which is the size of the region
divided by the size of a single redistributor frame. For GICv4, the
redistributor frame is a different size from that for GICv3. Abstract
out the calculation of redistributor region capacity so that we have
one place we need to change to handle GICv4 rather than several.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-41-peter.maydell@linaro.org
The CPU interface changes to support vLPIs are fairly minor:
in the parts of the code that currently look at the list registers
to determine the highest priority pending virtual interrupt, we
must also look at the highest priority pending vLPI. To do this
we change hppvi_index() to check the vLPI and return a special-case
value if that is the right virtual interrupt to take. The callsites
(which handle HPPIR and IAR registers and the "raise vIRQ and vFIQ
lines" code) then have to handle this special-case value.
This commit includes two interfaces with the as-yet-unwritten
redistributor code:
* the new GICv3CPUState::hppvlpi will be set by the redistributor
(in the same way as the existing hpplpi does for physical LPIs)
* when the CPU interface acknowledges a vLPI it needs to set it
to non-pending; the new gicv3_redist_vlpi_pending() function
(which matches the existing gicv3_redist_lpi_pending() used
for physical LPIs) is a stub that will be filled in later
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-26-peter.maydell@linaro.org
Implement the new GICv4 redistributor registers: GICR_VPROPBASER
and GICR_VPENDBASER; for the moment we implement these as simple
reads-as-written stubs, together with the necessary migration
and reset handling.
We don't put ID-register checks on the handling of these registers,
because they are all in the only-in-v4 extra register frames, so
they're not accessible in a GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-24-peter.maydell@linaro.org
The GICv4 extends the redistributor register map -- where GICv3
had two 64KB frames per CPU, GICv4 has four frames. Add support
for the extra frame by using a new gicv3_redist_size() function
in the places in the GIC implementation which currently use
a fixed constant size for the redistributor register block.
(Until we implement the extra registers they will RAZ/WI.)
Any board that wants to use a GICv4 will need to also adjust
to handle the different sized redistributor register block;
that will be done separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-23-peter.maydell@linaro.org
Implement the GICv4 VMOVP command, which updates an entry in the vPE
table to change its rdbase field. This command is unique in the ITS
command set because its effects must be propagated to all the other
ITSes connected to the same GIC as the ITS which executes the VMOVP
command.
The GICv4 spec allows two implementation choices for handling the
propagation to other ITSes:
* If GITS_TYPER.VMOVP is 1, the guest only needs to issue the command
on one ITS, and the implementation handles the propagation to
all ITSes
* If GITS_TYPER.VMOVP is 0, the guest must issue the command on
every ITS, and arrange for the ITSes to synchronize the updates
with each other by setting ITSList and Sequence Number fields
in the command packets
We choose the GITS_TYPER.VMOVP = 1 approach, and synchronously
execute the update on every ITS.
For GICv4.1 this command has extra fields in the command packet and
additional behaviour. We define the 4.1-only fields with the FIELD
macro, but only implement the GICv4.0 version of the command.
Note that we don't update the reported GITS_TYPER value here;
we'll do that later in a commit which updates all the reported
feature bit and ID register values for GICv4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-17-peter.maydell@linaro.org
[PMM: Moved gicv3_foreach_its() to arm_gicv3_its_common.h,
for consistency with gicv3_add_its()]
These structures are required to produce 32-bit guest Windows Complete
Memory Dump. Add 32-bit Windows dump header, CPU context and physical
memory descriptor structures along with corresponding definitions.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-4-viktor.prutyanov@redhat.com>
Context structure in 64-bit Windows differs from 32-bit one and it
should be reflected in its name.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-2-viktor.prutyanov@redhat.com>
Offset calculations are easy enough to get wrong. Let's add a few
variables to make moving around elf headers and data sections easier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330123603.107120-6-frankja@linux.ibm.com>
Let's move from a boolean to a int variable which will later enable us
to store the number of sections that are in the dump file.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220330123603.107120-4-frankja@linux.ibm.com>
There's no need to have phdr_num and sh_info at the same time. We can
make phdr_num 32 bit and set PN_XNUM when we write the header if
phdr_num >= PN_XNUM.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407094824.5074-1-frankja@linux.ibm.com>
The GICv4 ITS VMOVP command's semantics require it to perform the
operation on every ITS connected to the same GIC that the ITS that
received the command is attached to. This means that the GIC object
needs to keep a pointer to every ITS that is connected to it
(previously it was sufficient for the ITS to have a pointer to its
GIC).
Add a glib ptrarray to the GICv3 object which holds pointers to every
connected ITS, and make the ITS add itself to the array for the GIC
it is connected to when it is realized.
Note that currently all QEMU machine types with an ITS have exactly
one ITS in the system, so typically the length of this ptrarray will
be 1. Multiple ITSes are typically used to improve performance on
real hardware, so we wouldn't need to have more than one unless we
were modelling a real machine type that had multile ITSes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Moved gicv3_add_its() to arm_gicv3_its_common.h to avoid
compilation error building the KVM ITS]
Message-id: 20220408141550.1271295-16-peter.maydell@linaro.org
The GICv4 defines a new in-guest-memory table for the ITS: this is
the vPE table. Implement the new GITS_BASER2 register which the
guest uses to tell the ITS where the vPE table is located, including
the decode of the register fields into the TableDesc structure which
we do for the GITS_BASER<n> when the guest enables the ITS.
We guard provision of the new register with the its_feature_virtual()
function, which does a check of the GITS_TYPER.Virtual bit which
indicates presence of ITS support for virtual LPIs. Since this bit
is currently always zero, GICv4-specific features will not be
accessible to the guest yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-8-peter.maydell@linaro.org
The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB,
but not all platforms have dram_base within 3GB.
This patch adds an exception for dram base not within 3GB,
which will place fdt at dram_end align 16MB.
riscv_setup_rom_reset_vec() also needs to be modified
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220419115945.37945-1-dylan@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is now used by RISC-V as well. Update the comments.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-7-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V privilege spec defines that mtime is exposed as a memory-mapped
machine-mode read-write register. However, as QEMU uses host monotonic
timer as timer source, this makes mtime to be read-only in RISC-V
ACLINT.
This patch makes mtime to be writable by recording the time delta value
between the mtime value to be written and the timer value at the time
mtime is written. Time delta value is then added back whenever the timer
value is retrieved.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220420080901.14655-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds the SPI_HOST device model for ibex. The device specification is as per
[1]. The model has been tested on opentitan with spi_host unit tests
written for TockOS.
[1] https://docs.opentitan.org/hw/ip/spi_host/doc/
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303045426.511588-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs
-----BEGIN PGP SIGNATURE-----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=Rke9
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
hw/misc: Add PWRON STRAP bit fields in GCR module
hw/arm/virt: impact of gic-version on max CPUs
hw/core/irq: remove unused 'qemu_irq_split' function
hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/exynos4210: Drop Exynos4210Irq struct
hw/arm/exynos4210: Put combiners into state struct
hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
hw/arm/exynos4210: Delete unused macro definitions
hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
hw/arm/exynos4210: Put external GIC into state struct
hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
hw/arm/exynos4210: Coalesce board_irqs and irq_table
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
Since it depends on monitor code, and error_vprintf_unless_qmp() is
already there.
This will help to move error-report in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-31-marcandre.lureau@redhat.com>
Simplify a bit pre-compiler conditions.
For TSAN, QEMU already has CONFIG_TSAN, but it is only set when the
fiber API is present. (I wonder whether supporting TSAN without the
fiber API is really relevant)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-27-marcandre.lureau@redhat.com>
Move them where they belong, since the functions are implemented in block-qdict.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>
Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>
Move QEMU-specific code to util/osdep.c, so cutils can become a common
subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-22-marcandre.lureau@redhat.com>
The implementation depends on the OS. (and longer-term goal is to move
cutils to a common subproject)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-21-marcandre.lureau@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
Move the macro and declaration so it can use glib in the following
patch (it already depends on glib anyway for !optimize)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-19-marcandre.lureau@redhat.com>
Move qemu_main() declaration to a new header.
Simplify main.c since both cocoa & sdl cannot be enabled together.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-5-marcandre.lureau@redhat.com>
Similar to the Aspeed code in include/misc/aspeed_scu.h, we define
the PWRON STRAP fields in their corresponding module for NPCM7XX.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20220411165842.3912945-2-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them with the input IRQs of the combiner devices, and then
connect those to outputs of other devices in
exynos4210_init_board_irqs(). Now that the combiner objects are
easily accessible as s->int_combiner and s->ext_combiner we can make
the connections directly from one device to the other without going
via these arrays.
Since these are the only two remaining elements of Exynos4210Irq,
we can remove that struct entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-19-peter.maydell@linaro.org
Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere during realize.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-18-peter.maydell@linaro.org
At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, output combiner and
external GIC. The function exynos4210_combiner_get_gpioin() splits
some of the combiner input lines further to connect them to multiple
different inputs on the combiner.
Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a
configurable number of outputs, we can do all this in one place, by
making exynos4210_init_board_irqs() add extra outputs to the splitter
device when it must be connected to more than one input on each
combiner.
We do this with a new data structure, the combinermap, which is an
array each of whose elements is a list of the interrupt IDs on the
combiner which must be tied together. As we loop through each
interrupt ID, if we find that it is the first one in one of these
lists, we configure the splitter device with eonugh extra outputs and
wire them up to the other interrupt IDs in the list.
Conveniently, for all the cases where this is necessary, the
lowest-numbered interrupt ID in each group is in the range of the
external combiner, so we only need to code for this in the first of
the two loops in exynos4210_init_board_irqs().
The old code in exynos4210_combiner_get_gpioin() which is being
deleted here had several problems which don't exist in the new code
in its handling of the multi-core timer interrupts:
(1) the case labels specified bits 4 ... 8, but bit '8' doesn't
exist; these should have been 4 ... 7
(2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]
multiple times as the input of several different splitters,
which isn't allowed
(3) in an apparent cut-and-paste error, the cases for all the
multi-core timer inputs used "bit + 4" even though the
bit range for the case was (intended to be) 4 ... 7, which
meant it was looking at non-existent bits 8 ... 11.
None of these exist in the new code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-17-peter.maydell@linaro.org
The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will
connect multiple IRQs up to the same external GIC input, which
is not permitted. We do the same thing in the code in
exynos4210_init_board_irqs() because the conditionals selecting
an irq_id in the first loop match multiple interrupt IDs.
Overall we do this for interrupt IDs
(1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0
and
(1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1
These correspond to the cases for the multi-core timer that we are
wiring up to multiple inputs on the combiner in
exynos4210_combiner_get_gpioin(). That code already deals with all
these interrupt IDs being the same input source, so we don't need to
connect the external GIC interrupt for any of them except the first
(1, 4) and (1, 5). Remove the array entries and conditionals which
were incorrectly causing us to wire up extra lines.
This bug didn't cause any visible effects, because we only connect
up a device to the "primary" ID values (1, 4) and (1, 5), so the
extra lines would never be set to a level.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-16-peter.maydell@linaro.org
In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device
instead of qemu_irq_split().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-13-peter.maydell@linaro.org
Delete a couple of #defines which are never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-12-peter.maydell@linaro.org
The function exynos4210_combiner_get_gpioin() currently lives in
exynos4210_combiner.c, but it isn't really part of the combiner
device itself -- it is a function that implements the wiring up of
some interrupt sources to multiple combiner inputs. Move it to live
with the other SoC-level code in exynos4210.c, along with a few
macros previously defined in exynos4210.h which are now used only
in exynos4210.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-11-peter.maydell@linaro.org
The only time we use the ext_gic_irq[] array in the Exynos4210Irq
struct is during realize of the SoC -- we initialize it with the
input IRQs of the external GIC device, and then connect those to
outputs of other devices further on in realize (including in the
exynos4210_init_board_irqs() function). Now that the ext_gic object
is easily accessible as s->ext_gic we can make the connections
directly from one device to the other without going via this array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-10-peter.maydell@linaro.org
Switch the creation of the external GIC to the new-style "embedded in
state struct" approach, so we can easily refer to the object
elsewhere during realize.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-9-peter.maydell@linaro.org
The function exynos4210_init_board_irqs() currently lives in
exynos4210_gic.c, but it isn't really part of the exynos4210.gic
device -- it is a function that implements (some of) the wiring up of
interrupts between the SoC's GIC and combiner components. This means
it fits better in exynos4210.c, which is the SoC-level code. Move it
there. Similarly, exynos4210_git_irq() is used almost only in the
SoC-level code, so move it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-8-peter.maydell@linaro.org
The exynos4210 code currently has two very similar arrays of IRQs:
* board_irqs is a field of the Exynos4210Irq struct which is filled
in by exynos4210_init_board_irqs() with the appropriate qemu_irqs
for each IRQ the board/SoC can assert
* irq_table is a set of qemu_irqs pointed to from the
Exynos4210State struct. It's allocated in exynos4210_init_irq,
and the only behaviour these irqs have is that they pass on the
level to the equivalent board_irqs[] irq
The extra indirection through irq_table is unnecessary, so coalesce
these into a single irq_table[] array as a direct field in
Exynos4210State which exynos4210_init_board_irqs() fills in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-6-peter.maydell@linaro.org
The only time we use the int_gic_irq[] array in the Exynos4210Irq
struct is in the exynos4210_realize() function: we initialize it with
the GPIO inputs of the a9mpcore device, and then a bit later on we
connect those to the outputs of the internal combiner. Now that the
a9mpcore object is easily accessible as s->a9mpcore we can make the
connection directly from one device to the other without going via
this array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-5-peter.maydell@linaro.org
The exynos4210 SoC mostly creates its child devices as if it were
board code. This includes the a9mpcore object. Switch that to a
new-style "embedded in the state struct" creation, because in the
next commit we're going to want to refer to the object again further
down in the exynos4210_realize() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-4-peter.maydell@linaro.org
The Exynos4210 SoC device currently uses a custom device
"exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ
line. We have a standard TYPE_OR_IRQ device for this now, so use
that instead.
(This is a migration compatibility break, but that is OK for this
machine type.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-2-peter.maydell@linaro.org
Connect the CRL (Clock Reset LPD) to the Versal SoC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the Xilinx Versal CRL.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit)
subsystem.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create an APU CPU Cluster. This is in preparation to add the RPU.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the 4 TTC timers on the ZynqMP.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Break out header file to allow embedding of the the TTC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are still some files in the QEMU PPC code base that use TABs for
indentation instead of using spaces. The TABs should be replaced so
that we have a consistent coding style.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/374
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220412021240.2080218-1-qtxuning1999@sjtu.edu.cn>
[danielhb: trimmed commit msg to 72 chars per line]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on parts_sint_to_float, implements int128_to_float128 to convert a
signed 128-bit value received through an Int128 argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220330175932.6995-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on parts_uint_to_float, implements uint128_to_float128 to convert
an unsigned 128-bit value received through an Int128 argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement an unsigned right shift for Int128 values and add the same
tests cases of int128_rshift in the unit test.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-3-matheus.ferst@eldorado.org.br>
[danielhb: fixed long lines in test_urshift()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All devices raising PSI interrupts are now converted to use GPIO lines
and the pnv_psi_irq_set() routines have become useless. Drop them.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-5-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use an anonymous output GPIO line to connect the OCC device with the
PSIHB device and raise the appropriate PSI IRQ line depending on the
processor model.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-4-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create an anonymous output GPIO line to connect the LPC device with
the PSIHB device and raise the appropriate PSI IRQ line depending on
the processor model.
A temporary __pnv_psi_irq_set() routine is introduced to handle the
transition. It will be removed when all devices raising PSI interrupts
are converted to use GPIOs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-3-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On HW, the PSI and FSP interrupt levels are muxed under the same
interrupt number. For coding reasons, an extra IRQ number was
introduced to index register values in an array. It increased the
count of IRQs which do not fit in the PSI IRQ range anymore.
The PSI and FSP interrupts should be modeled with an extra level of
GPIO lines but since QEMU does not support them, simply drop the extra
number to stay within the IRQ range.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-2-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Recently the LoPAPR spec got a new 2MB pagesize to support in Dynamic DMA
Windows API (DDW), this adds the new flag.
Linux supports it since
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=38727311871
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220321071945.918669-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Similar to tcg_const_ptr, defer to tcg_constant_{i32,i64}.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With TCG_OPF_COND_BRANCH, we extended the lifetimes of
globals across extended basic blocks. This means that
the liveness computed in pass 1 does not kill globals
in the same way as normal temps.
Introduce TYPE_EBB to match this lifetime, so that we
get correct register allocation for the temps that we
introduce during the indirect lowering pass.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b4cb76e620 ("tcg: Do not kill globals at conditional branches")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new log flag, tid, to turn this feature on.
Require the log filename to be set, and to contain %d.
Do not allow tid to be turned off once it is on, nor let
the filename be change thereafter. This avoids the need
for signalling each thread to re-open on a name change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-40-richard.henderson@linaro.org>
The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort. We do not
really need to close the FILE before the abort.
The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>
Provide a function to set both filename and flags at
the same time. This is the common case at startup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-28-richard.henderson@linaro.org>
The bug referenced in os-win32.h was fixed in mingw-w64 v6.
According to repology, version 5 used by ubuntu 18, which is
not yet out of support, so provide a meson link test for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>
Move QemuLogFile, qemu_logfile, and all inline functions into qemu/log.c.
No need to expose these implementation details in the api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-26-richard.henderson@linaro.org>
Use qemu_log_trylock/unlock instead of the raw rcu_read.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220417183019.755276-25-richard.henderson@linaro.org>
We have extra stuff to log at the same time.
Hoist the qemu_log_lock/unlock to the caller and use fprintf.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-23-richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Now that all uses have been updated, consider a missing
test of the result of qemu_log_trylock a bug and Werror.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-19-richard.henderson@linaro.org>
The only user of this feature, tcg_dump_ops, has been
converted to use fprintf directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-18-richard.henderson@linaro.org>
These functions are no longer used.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-14-richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
This function is no longer used.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-11-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-7-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
Per the recommendations in qapi/error.h, return false on failure.
Use the return value in the monitor, the only place we aren't
already passing error_fatal or error_abort.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-4-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
=rMle
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vmstate_acpi_pcihp_use_acpi_index() was expecting AcpiPciHpState
as state but it actually received PIIX4PMState, because
VMSTATE_PCI_HOTPLUG is a macro and not another struct.
So it ended up accessing random pointer, which resulted
in 'false' return value and acpi_index field wasn't ever
sent.
However in 7.0 that pointer de-references to value > 0, and
destination QEMU starts to expect the field which isn't
sent in migratioon stream from older QEMU (6.2 and older).
As result migration fails with:
qemu-system-x86_64: Missing section footer for 0000:00:01.3/piix4_pm
qemu-system-x86_64: load of migration failed: Invalid argument
In addition with QEMU-6.2, destination due to not expected
state, also never expects the acpi_index field in migration
stream.
Q35 is not affected as it always sends/expects the field as
long as acpi based PCI hotplug is enabled.
Fix issue by introducing compat knob to never send/expect
acpi_index in migration stream for 6.2 and older PC machine
types and always send it for 7.0 and newer PC machine types.
Diagnosed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b32bd76 ("pci: introduce acpi-index property for PCI device")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/932
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SynDbg commands can come from two different flows:
1. Hypercalls, in this mode the data being sent is fully
encapsulated network packets.
2. SynDbg specific MSRs, in this mode only the data that needs to be
transfered is passed.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add all required definitions for hyperv synthetic debugger interface.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-3-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that QemuSemaphore is implemented through pthread_cond_t only, we can use
QemuCond and QemuMutex to make the code smaller. Features such as mutex
tracing and CLOCK_MONOTONIC timedwait are supported in qemu-sem naturally.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20220222090507.2028-4-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POSIX specifies an absolute time for sem_timedwait(), it would be
affected if the system time is changing, but there is not a relative
time or monotonic clock version of sem_timedwait, so we cannot gain
from POSIX semaphore any more.
An alternative way is to use sem_trywait + usleep, maybe we can
remove CONFIG_SEM_TIMEDWAIT in this way? No, because some systems
(e.g. mac os) mark the sem_xxx API as deprecated.
So maybe remove the usage of POSIX semaphore and turn to use the
pthread variant for all systems looks better.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20220222090507.2028-2-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Below is the updated version of the patch adding debugging support to WHPX.
It incorporates feedback from Alex Bennée and Peter Maydell regarding not
changing the emulation logic depending on the gdb connection status.
Instead of checking for an active gdb connection to determine whether QEMU
should intercept the INT1 exceptions, it now checks whether any breakpoints
have been set, or whether gdb has explicitly requested one or more CPUs to
do single-stepping. Having none of these condition present now has the same
effect as not using gdb at all.
Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only implemented for POSIX anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-30-marcandre.lureau@redhat.com>
[Add braces around if statements. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with other os_ functions that do not have POSIX
implementation, declare an inline function for the stub in os-win32.h.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-27-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the implementation unit is page-vary.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Along with other state tracking functions. Rename it for consistency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-21-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Closer to other IO functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-18-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The macro requires EINTR, which has its header included in osdep.h.
(Not sure what TFR stands for, perhaps "Test For Retry". Rename it ?)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-17-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to GLib API:
g_get_current_time has been deprecated since version 2.62 and should not
be used in newly-written code. GTimeVal is not year-2038-safe. Use
g_get_real_time() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Need wrappers for qobject_unref() calls, which is a macro.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-10-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only needed by char-pty.
Fix the code style while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer used after the previous patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220307070401.171986-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The spec defines 3 registers, even though only index 0 and 2 are valid
on POWER9. The same model is used on POWER10. Register 1 is defined
there but we currently don't use it in skiboot. So we can keep
reporting an error on write.
Reported by Coverity (CID 1487176).
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220401091925.770803-1-fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The timebase is allocated during spapr_realize_vcpu() and it's not
freed. This results in memory leaks when doing vcpu unplugs:
==636935==
==636935== 144 (96 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 6
,461 of 8,135
==636935== at 0x4897468: calloc (vg_replace_malloc.c:760)
==636935== by 0x5077213: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.4)
==636935== by 0x507757F: g_malloc0_n (in /usr/lib64/libglib-2.0.so.0.6400.4)
==636935== by 0x93C3FB: cpu_ppc_tb_init (ppc.c:1066)
==636935== by 0x97BC2B: spapr_realize_vcpu (spapr_cpu_core.c:268)
==636935== by 0x97C01F: spapr_cpu_core_realize (spapr_cpu_core.c:337)
==636935== by 0xD4626F: device_set_realized (qdev.c:531)
==636935== by 0xD55273: property_set_bool (object.c:2273)
==636935== by 0xD523DF: object_property_set (object.c:1408)
==636935== by 0xD588B7: object_property_set_qobject (qom-qobject.c:28)
==636935== by 0xD52897: object_property_set_bool (object.c:1477)
==636935== by 0xD4579B: qdev_realize (qdev.c:333)
==636935==
This patch adds a cpu_ppc_tb_free() helper in hw/ppc/ppc.c to allow us
to free the timebase. This leak is then solved by calling
cpu_ppc_tb_free() in spapr_unrealize_vcpu().
Fixes: 6f4b5c3ec5 ("spapr: CPU hot unplug support")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220329124545.529145-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These assertions are very useful for developers to find bugs, and so
they have indeed pointed us towards bugs already. For users, it is not
so useful to find these bugs. We should probably not enable them in
releases until we are sufficiently certain that they will not fire
during normal operation, unless something is going seriously wrong.
For example, we have received a bug report that you cannot add an NBD
server on a BDS in an I/O thread with `-incoming defer`. I am sure this
is a real bug that needs investigation, but we do not really have that
time right now, so close to release, and so I would rather disable the
assertions to get time to investigate such reports.
(I am just putting the link as "buglink" below, not "closes", because
disabling the assertion will not fix the likely underlying bug.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/945
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220329093545.52114-1-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Move qemu_ether_ntoa() which is only needed in net/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will help to make common code independent.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Simplify the macro, not depending on headers defines, but compiler
predefined __SIZEOF__POINTER__ only.
Available since gcc 4.3 and clang 2.8.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Add the 'memory' bit to the memory attributes to restrict bus
controller accesses to memories.
Introduce flatview_access_allowed() to check bus permission
before running any bus transaction.
Have read/write accessors return MEMTX_ACCESS_ERROR if an access is
restricted.
There is no change for the default case where 'memory' is not set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211215182421.418374-4-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[thuth: Replaced MEMTX_BUS_ERROR with MEMTX_ACCESS_ERROR, remove "inline"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
On older Solaris releases (before Solaris 11), we didn't get a
prototype for madvise, and so util/osdep.c provides its own prototype.
Some time between the public Solaris 11.4 release and Solaris 11.4.42
CBE, we started getting an madvise prototype that looks like this:
extern int madvise(void *, size_t, int);
which conflicts with the prototype in util/osdeps.c. Instead of always
declaring this prototype, check if we're missing the madvise()
prototype, and only declare it ourselves if the prototype is missing.
Move the prototype to include/qemu/osdep.h, the normal place to handle
platform-specific header quirks.
The 'missing_madvise_proto' meson check contains an obviously wrong
prototype for madvise. So if that code compiles and links, we must be
missing the actual prototype for madvise.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Message-id: 20220316035227.3702-2-adeason@sinenomine.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the ZynqMP APU Control device.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the Xilinx ZynqMP APU Control.
Reviewed-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the ZynqMP CRF - Clock Reset FPD device.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the Xilinx ZynqMP CRF. At the moment this
is mostly a stub model.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an unimplemented SERDES (Serializer/Deserializer) area.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e0220bb5b2 made cpus.c target-agnostic but didn't notice
the cpu_list() function is only defined in target-specific code
in "cpu.h". Move list_cpus() declaration to "exec/cpu-common.h"
because this function is not softmmu-specific and can also be
used by user-mode, along with moving its implementation to cpu.c,
which is compiled per target.
Fixes: e0220bb5b2 ("softmmu: Build target-agnostic objects once")
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220314140108.26222-1-philippe.mathieu.daude@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
-----BEGIN PGP SIGNATURE-----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=PLdU
-----END PGP SIGNATURE-----
Merge tag 'darwin-20220315' of https://github.com/philmd/qemu into staging
Darwin-based host patches
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
# gpg: Signature made Tue 15 Mar 2022 12:52:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'darwin-20220315' of https://github.com/philmd/qemu: (21 commits)
MAINTAINERS: Volunteer to maintain Darwin-based hosts support
ui/cocoa: add option to swap Option and Command
ui/cocoa: capture all keys and combos when mouse is grabbed
ui/cocoa: release mouse when user switches away from QEMU window
ui/cocoa: add option to disable left-command forwarding to guest
ui/cocoa: Constify qkeycode translation arrays
configure: Pass filtered QEMU_OBJCFLAGS to meson
meson: Log QEMU_CXXFLAGS content in summary
meson: Resolve the entitlement.sh script once for good
osdep: Avoid using Clang-specific __builtin_available()
audio: Rename coreaudio extension to use Objective-C compiler
coreaudio: Always return 0 in handle_voice_change
audio: Log context for audio bug
audio/dbus: Fix building with modules on macOS
audio/coreaudio: Remove a deprecation warning on macOS 12
block/file-posix: Remove a deprecation warning on macOS 12
hvf: Remove deprecated hv_vcpu_flush() calls
hvf: Make hvf_get_segments() / hvf_put_segments() local
hvf: Use standard CR0 and CR4 register definitions
tests/fp/berkeley-testfloat-3: Ignore ignored #pragma directives
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hi,
Here are pending fixes related to D-Bus and GL, most of them reported thanks to
Akihiko Odaki.
-----BEGIN PGP SIGNATURE-----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=itk/
-----END PGP SIGNATURE-----
Merge tag 'dbus-pull-request' of gitlab.com:marcandre.lureau/qemu into staging
GL & D-Bus display related fixes
Hi,
Here are pending fixes related to D-Bus and GL, most of them reported thanks to
Akihiko Odaki.
# gpg: Signature made Tue 15 Mar 2022 09:36:45 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'dbus-pull-request' of gitlab.com:marcandre.lureau/qemu:
ui/console: call gfx_switch() even if the current scanout is GL
ui/dbus: do not send 2d scanout until gfx_update
ui/dbus: fix texture sharing
ui/console: optionally update after gfx switch
ui/console: add a dpy_gfx_switch callback helper
ui/shader: free associated programs
ui/shader: fix potential leak of shader on error
ui/console: move console compatibility check to dcl_display_console()
ui/dbus: associate the DBusDisplayConsole listener with the given console
ui/console: egl-headless is compatible with non-gl listeners
ui/console: move dcl compatiblity check to a callback
ui/console: move check for compatible GL context
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* VSS header fixes (Marc-André)
* 5-level EPT support (Vitaly)
* AMX support (Jing Liu & Yang Zhong)
* Bundle changes to MSI routes (Longpeng)
* More precise emulation of #SS (Gareth)
* Disable ASAN testing
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIwb5QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOOUQf8DiNcq8XVVMdX946Qwa4pSxc4ZJtF
X+RkNsscluuLJ2vGEFKwPVps6c6UPqAhXUruZOQmcLmma511MsyJrxyfd4iRgPD2
tL1+n4RpfsbnTEGT8c6TFWWMEIOjLTbKmR/SIxuxpeVG3xlk6tlCevykrIdc90gP
vQIByTGFx3GwiPyDo0j92mA/CsWLnfq6zQ2Tox1xCyt8R+QDimqG0KGLc5RAyiyC
ZmilN2yaqizDfkIzinwHG6gP1NGwVUsrUNl4X9C4mwEMFnsXiyKP5n/BlDZ7w4Wb
QXalFpPg1hJxRGGvyta6OF9VmCfmK9Q0FNVWm1lPE5adn3ECHFo6FJKvfg==
=LVgf
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* whpx fixes in preparation for GDB support (Ivan)
* VSS header fixes (Marc-André)
* 5-level EPT support (Vitaly)
* AMX support (Jing Liu & Yang Zhong)
* Bundle changes to MSI routes (Longpeng)
* More precise emulation of #SS (Gareth)
* Disable ASAN testing
# gpg: Signature made Tue 15 Mar 2022 10:51:00 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (22 commits)
gitlab-ci: do not run tests with address sanitizer
KVM: SVM: always set MSR_AMD64_TSC_RATIO to default value
i386: Add Icelake-Server-v6 CPU model with 5-level EPT support
x86: Support XFD and AMX xsave data migration
x86: add support for KVM_CAP_XSAVE2 and AMX state migration
x86: Add AMX CPUIDs enumeration
x86: Add XFD faulting bit for state components
x86: Grant AMX permission for guest
x86: Add AMX XTILECFG and XTILEDATA components
x86: Fix the 64-byte boundary enumeration for extended state
linux-headers: include missing changes from 5.17
target/i386: Throw a #SS when loading a non-canonical IST
target/i386: only include bits in pg_mode if they are not ignored
kvm/msi: do explicit commit when adding msi routes
kvm-irqchip: introduce new API to support route change
update meson-buildoptions.sh
qga/vss: update informative message about MinGW
qga/vss-win32: check old VSS SDK headers
meson: fix generic location of vss headers
vmxcap: Add 5-level EPT bit
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the Clang specific __builtin_available() to allow building
with GCC, otherwise we get:
include/qemu/osdep.h: In function 'qemu_thread_jit_write':
include/qemu/osdep.h:787:9: warning: implicit declaration of function '__builtin_available'; did you mean '__builtin_scalbl'? [-Wimplicit-function-declaration]
787 | if (__builtin_available(macOS 11.0, *)) {
| ^~~~~~~~~~~~~~~~~~~
| __builtin_scalbl
include/qemu/osdep.h:787:9: warning: nested extern declaration of '__builtin_available' [-Wnested-externs]
include/qemu/osdep.h:787:29: error: 'macOS' undeclared (first use in this function)
787 | if (__builtin_available(macOS 11.0, *)) {
| ^~~~~
include/qemu/osdep.h:787:29: note: each undeclared identifier is reported only once for each function it appears in
include/qemu/osdep.h:787:34: error: expected ')' before numeric constant
787 | if (__builtin_available(macOS 11.0, *)) {
| ~ ^~~~~
| )
Beside, on macOS Catalina we get 2254 times:
include/qemu/osdep.h:780:5: warning: 'pthread_jit_write_protect_np' is only available on macOS 11.0 or newer [-Wunguarded-availability-new]
pthread_jit_write_protect_np(true);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix by using a stricker toolchain version low range, replacing
MAC_OS_X_VERSION_MAX_ALLOWED by MAC_OS_X_VERSION_MIN_REQUIRED.
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
-----BEGIN PGP SIGNATURE-----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=A6RF
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220314' of https://github.com/legoater/qemu into staging
ppc-7.0 queue :
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
# gpg: Signature made Mon 14 Mar 2022 15:16:07 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20220314' of https://github.com/legoater/qemu:
ppc/pnv: Remove user-created PHB{3,4,5} devices
ppc/pnv: Always create the PHB5 PEC devices
ppc/pnv: Introduce a pnv-phb5 device to match root port
ppc/xive2: Make type Xive2EndSource not user creatable
target/ppc: fix xxspltw for big endian hosts
target/ppc: fix ISI fault cause for Radix MMU
avocado/ppc_virtex_ml507.py: check TCG accel in test_ppc_virtex_ml507()
avocado/ppc_prep_40p.py: check TCG accel in all tests
avocado/ppc_mpc8544ds.py: check TCG accel in test_ppc_mpc8544ds()
avocado/ppc_bamboo.py: check TCG accel in test_ppc_bamboo()
avocado/ppc_74xx.py: check TCG accel for all tests
avocado/ppc_405.py: check TCG accel in test_ppc_ref405ep()
avocado/ppc_405.py: remove test_ppc_taihu()
avocado/boot_linux_console.py: check TCG accel in test_ppc_mac99()
avocado/boot_linux_console.py: check TCG accel in test_ppc_g3beige()
avocado/replay_kernel.py: make tcg-icount check in run_vm()
avocado/boot_linux_console.py: check tcg accel in test_ppc64_e500
avocado/boot_linux_console.py: check for tcg in test_ppc_powernv8/9
qtest/meson.build: check CONFIG_TCG for boot-serial-test in qtests_ppc
qtest/meson.build: check CONFIG_TCG for prom-env-test in qtests_ppc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route
table, which is not efficient if we are adding lots of routes in some cases.
This patch lets callers invoke the kvm_irqchip_commit_routes(), so the
callers can decide how to optimize.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo suggested adding the new API to support route changes [1]. We should invoke
kvm_irqchip_begin_route_changes() before changing the routes, increasing the
KVMRouteChange.changes if the routes are changed, and commit the changes at last.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg02898.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-2-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DBus listener naively create, update and destroy textures without
taking into account other listeners. The texture were shared, but
texture update was unnecessarily duplicated.
Teach DisplayGLCtx to do optionally shared texture handling. This is
only implemented for DBus display at this point, however the same
infrastructure could potentially be used for other future combinations.
Reported-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
SVQ is able to log the dirty bits by itself, so let's use it to not
block migration.
Also, ignore set and clear of VHOST_F_LOG_ALL on set_features if SVQ is
enabled. Even if the device supports it, the reports would be nonsense
because SVQ memory is in the qemu region.
The log region is still allocated. Future changes might skip that, but
this series is already long enough.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use translations added in VhostIOVATree in SVQ.
Only introduce usage here, not allocation and deallocation. As with
previous patches, we use the dead code paths of shadow_vqs_enabled to
avoid commiting too many changes at once. These are impossible to take
at the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function does the reverse operation of iova_tree_find: To look for
a mapping that match a translated address so we can do the reverse.
This have linear complexity instead of logarithmic, but it supports
overlapping HVA. Future developments could reduce it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This iova tree function allows it to look for a hole in allocated
regions and return a totally new translation for a given translated
address.
It's usage is mainly to allow devices to access qemu address space,
remapping guest's one into a new iova space where qemu can add chunks of
addresses.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
At this mode no buffer forwarding will be performed in SVQ mode: Qemu
will just forward the guest's kicks to the device.
Host memory notifiers regions are left out for simplicity, and they will
not be addressed in this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On a real system with POWER{8,9,10} processors, PHBs are sub-units of
the processor, they can be deactivated by firmware but not plugged in
or out like a PCI adapter on a slot. Nevertheless, having user-created
PHBs in QEMU seemed to be a good idea for testing purposes :
1. having a limited set of PHBs speedups boot time.
2. it is useful to be able to mimic a partially broken topology you
some time have to deal with during bring-up.
PowerNV is also used for distro install tests and having libvirt
support eases these tasks. libvirt prefers to run the machine with
-nodefaults to be sure not to drag unexpected devices which would need
to be defined in the domain file without being specified on the QEMU
command line. For this reason :
3. -nodefaults should not include default PHBs
User-created PHB{3,4,5} devices satisfied all these needs but reality
proves to be a bit more complex, internally when modeling such
devices, and externally when dealing with the user interface.
Req 1. and 2. can be simply addressed differently with a machine option:
"phb-mask=<uint>", which QEMU would use to enable/disable PHB device
nodes when creating the device tree.
For Req 3., we need to make sure we are taking the right approach. It
seems that we should expose a new type of user-created PHB device, a
generic virtualized one, that libvirt would use and not one depending
on the processor revision. This needs more thinking.
For now, remove user-created PHB{3,4,5} devices. All the cleanups we
did are not lost and they will be useful for the next steps.
Fixes: 5bc67b052b ("ppc/pnv: Introduce user creatable pnv-phb4 devices")
Fixes: 1f6a88fffc ("ppc/pnv: Introduce support for user created PHB3 devices")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220314130514.529931-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We already have the pnv-phb3 and pnv-phb4 devices for POWER8 and
POWER9 respectively. POWER10 uses version 5 of the PHB. It is very
close to the PHB4 from POWER9, at least in our model and we could
almost keep using the PHB4 model. However the matching root port
pnv-phb5-root-port is specific to POWER10 so to avoid confusion as
well as making it easy to introduce differences later, we create a
pnv-phb5 class, which is mostly an alias for pnv-phb4 for now.
With this patch, the command line for a user-created PHB on powernv10
becomes:
-machine powernv10 -nodefaults -device pnv-phb5 -device pnv-phb5-root-port
Fixes: 623575e16c ("ppc/pnv: Add model for POWER10 PHB5 PCIe Host bridge")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220310155101.294568-2-fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
As expected from the "compatible_dcl" comment, a simple comparison of
ops isn't enough. The following patch will fix a regression introduced
by this limited check by extending the compatibility callback for
egl-headless.
For now, this patch simply replaces the the "compatible_dcl" ops pointer
with a "dpy_gl_ctx_is_compatible_ctx" callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmIoiAMeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfcn0H+wfeA9uKZ9DNc20O
XDkq2lnUiEyrKsZrVn8jRlw/zHnuElX2WmMGckisJpcaBpZSwlypHBhrjssUXu7v
nHlrOYqoKxiYFSZVPj1n+P849BW3LKNgcA5/njA87QUjMOCW6eq4Sp9beDsSbw57
cPAXUhGNI4uvLh6ew9aoxz01KhBSY1hFMmX0U6gcDx48f5cr/NU81+Vae0+Ks3B+
BPbYjED3yr7G6nu63MT63WXlAnKBQpndkjbVYubQCwVJqLRBb6p37Gm81KXozpos
QxF9miWdzA2dRCrSutcAd84rTWq2w8T2Wf2sW3B8lXNy+s+qTSnvsiOUjoaESzv7
UKXmYZE=
=RwkZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/q800-updates-for-7.0-20220309' into staging
q800-updates-for-7.0 queue
# gpg: Signature made Wed 09 Mar 2022 10:57:07 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/q800-updates-for-7.0-20220309: (22 commits)
esp: recreate ESPState current_req after migration
esp: include the current PDMA callback in the migration stream
esp: convert ESPState pdma_cb from a function pointer to an integer
esp: introduce esp_pdma_cb() function
esp: introduce esp_set_pdma_cb() function
macfb: set initial value of mode control registers in macfb_common_realize()
macfb: add VMStateDescription fields for display type and VBL timer
macfb: increase number of registers saved in MacfbState
macfb: don't use special irq_state and irq_mask variables in MacfbState
macfb: add VMStateDescription for MacfbNubusState and MacfbSysBusState
macio/pmu.c: remove redundant code
mos6522: implement edge-triggering for CA1/2 and CB1/2 control line IRQs
mac_via: make SCSI_DATA (DRQ) bit live rather than latched
mos6522: record last_irq_levels in mos6522_set_irq()
mos6522: add "info via" HMP command for debugging
mos6522: add register names to register read/write trace events
mos6522: use device_class_set_parent_reset() to propagate reset to parent
mos6522: remove update_irq() and set_sr_int() methods from MOS6522DeviceClass
mos6522: switch over to use qdev gpios for IRQs
mac_via: use IFR bit flag constants for VIA2 IRQs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix for a potential memory leak
* Aspeed SMC cleanups on the definition of the number of flash devices
* New bletchley-bmc machine, AST2600 based
-----BEGIN PGP SIGNATURE-----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=5VHm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220308' into staging
aspeed queue:
* Fix for a potential memory leak
* Aspeed SMC cleanups on the definition of the number of flash devices
* New bletchley-bmc machine, AST2600 based
# gpg: Signature made Tue 08 Mar 2022 08:19:25 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20220308:
hw: aspeed_gpio: Cleanup stray semicolon after switch
hw/arm/aspeed: add Bletchley machine type
hw/arm/aspeed: allow missing spi_model
hw/block: m25p80: Add support for w25q01jvq
aspeed/smc: Fix error log
aspeed/smc: Let the SSI core layer define the bus name
aspeed/smc: Rename 'max_peripherals' to 'cs_num_max'
aspeed/smc: Remove 'num_cs' field
aspeed: Rework aspeed_board_init_flashes() interface
aspeed/smc: Use max number of CE instead of 'num_cs'
aspeed: Fix a potential memory leak bug in write_boot_rom()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmImtE8ACgkQp6FrSiUn
Q2ovmgf/aksDqf2eNcahs++fez+8Qi9ll5OY/qGyjnzBgsatYKjrK+xF7OnjoJox
eRX026lh81Q4EQK7oZBUnr2UCY4bncDBTI7MTLh603EV/tId5ZLwx007ERhzvtC1
mIsQHXNuO9X25LQG2eWnfunY9YztQpiT5r/g3khD2yPBqJWIvBfblzPLx6FkF7px
/WM8xEKCihmGr1Wr3b+zGYL083YkaBWCvHoR8mJt3tEFUj+Qie8XcdV0OVyI0XUj
5goIFRcpVwBE8P2nLtfUKNzEXz22cmdonOJUX7E5IvGO21k5F/HrWlHdo8JnuSUZ
t0w5L9yCxBrRpY1burz30b77J0WMCw==
=C8Dd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-03-07' into staging
nbd patches for 2022-03-07
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
# gpg: Signature made Tue 08 Mar 2022 01:41:35 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2022-03-07:
qemu-io: Allow larger write zeroes under no fallback
qemu-io: Utilize 64-bit status during map
nbd/server: Minor cleanups
tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
tests/qemu-iotests: validate NBD TLS with UNIX sockets
tests/qemu-iotests: validate NBD TLS with hostname mismatch
tests/qemu-iotests: convert NBD TLS test to use standard filters
tests/qemu-iotests: introduce filter for qemu-nbd export list
tests/qemu-iotests: expand _filter_nbd rules
tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
block/nbd: don't restrict TLS usage to IP sockets
qemu-nbd: add --tls-hostname option for TLS certificate validation
block/nbd: support override of hostname for TLS certificate validation
block: pass desired TLS hostname through from block driver client
crypto: mandate a hostname when checking x509 creds on a client
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This prepares for the inclusion of the current PDMA callback in the migration
stream since the callback is referenced by an integer instead of a function
pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM accesses a number of addresses between 0x0 and 0x200 during
initialisation and resolution changes. Whilst the function of many of these
registers is unknown, it is worth the minimal cost of saving these extra values as
part of migration to help future-proof the migration stream for the q800 machine
as it starts to stabilise.
Note this is a migration break, but since there are upcoming incompatible changes
for the q800 machine (and migration does not even succeed without these patches)
then this is not an issue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current IRQ state and IRQ mask are handled exactly the same as standard
register accesses, so store these values directly in the regs array rather
than having separate variables for them.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the logic related to edge-triggered interrupts is all contained within
the mos6522 device the redundant implementation for the mac99 PMU device can
be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The mos6522 datasheet describes how the control lines IRQs are edge-triggered
according to the configuration in the PCR register. Implement the logic according
to the datasheet so that the interrupt bits in IFR are latched when the edge is
detected, and cleared when reading portA/portB or writing to IFR as necessary.
To maintain bisectibility this change also updates the SCSI, SCSI data, Nubus
and VIA2 60Hz/1Hz clocks in the q800 machine to be negative edge-triggered as
confirmed by the PCR programming in all of Linux, NetBSD and MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To detect edge-triggered IRQs it is necessary to store the last state of each
IRQ in a last_irq_levels bitmap.
Note: this is a migration break for machines which use mos6522 instances which
are g3beige/mac99 (PPC) and q800 (m68k).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This displays detailed information about the device registers and timers to aid
debugging problems with timers and interrupts.
Currently the QAPI generators for HumanReadableText don't work correctly if
used in qapi/target-misc.json when a non-specified target is built, so for
now manually add a hmp_info_via() wrapper until direct support for per-device
HMP/QMP commands is implemented.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps to follow how the guest is programming the mos6522 when debugging.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the mos6522 IRQs are managed using standard qdev gpios these methods
are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
For historical reasons each mos6522 instance implements its own setting and
update of the IFR flag bits using methods exposed by MOS6522DeviceClass. As
of today this is no longer required, and it is now possible to implement
the mos6522 IRQs as standard qdev gpios.
Switch over to use qdev gpios for the mos6522 device and update all instances
accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These are intended to make it easier to see how the physical control lines
are wired for each instance.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
It can therefore be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220301220037.76555-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Now that the last users of ISADevice::isairq[] have been resolved during the
previous commits, it can be removed for good.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-13-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
The reason the IRQ number didn's show up before is that this device does not
call isa_init_irq().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-9-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Now that gt64120_register() lost its pic parameter, there is an
opportunity to remove it. gt64120_register() is old style by wrapping
qdev API, and the new style is to use qdev directly. So take the
opportunity and modernize the code.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220217101924.15347-8-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that piix4_set_irq's opaque parameter references own PIIX4State,
piix4_dev becomes redundant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-6-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Handling PCI interrupts in piix4 increases cohesion and reduces differences
between piix4 and piix3.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220217101924.15347-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Renesas RAA229004 is a PMBus Multiphase Voltage Regulator
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-9-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- add the VOUT_MIN and STATUS_MFR registers
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-2-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The naming makes more sense in a SPI controller model.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220307071856.1410731-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is not used anymore.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220307071856.1410731-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In
commit a71d597b98
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Thu Jun 10 13:08:00 2021 +0300
block/nbd: reuse nbd_co_do_establish_connection() in nbd_open()
the use of the 'hostname' field from the BDRVNBDState struct was
lost, and 'nbd_connect' just hardcoded it to match the IP socket
address. This was a harmless bug at the time since we block use
with anything other than IP sockets.
Shortly though, we want to allow the caller to override the hostname
used in the TLS certificate checks. This is to allow for TLS
when doing port forwarding or tunneling. Thus we need to reinstate
the passing along of the 'hostname'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
-----BEGIN PGP SIGNATURE-----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=bOxK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/abstract-arch-cpu-20220307' into staging
- Re-org accel/ and softmmu/ to have more target-agnostic objects.
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
# gpg: Signature made Sun 06 Mar 2022 23:23:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/abstract-arch-cpu-20220307: (33 commits)
accel/tcg: Remove pointless CPUArchState casts
target/i386: Remove pointless CPUArchState casts
target: Use ArchCPU as interface to target CPU
target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro
target: Use CPUArchState as interface to target-specific CPU state
target: Use forward declared type instead of structure type
target/hexagon: Add missing 'hw/core/cpu.h' include
target: Include missing 'cpu.h'
Hexagon (target/hexagon) convert to OBJECT_DECLARE_TYPE
target/i386/tcg/sysemu: Include missing 'exec/exec-all.h' header
cpu: Add missing 'exec/exec-all.h' and 'qemu/accel.h' headers
exec/cpu_ldst: Include 'cpu.h' to get target_ulong definition
meson: Display libfdt as disabled when system emulation is disabled
softmmu: Build target-agnostic objects once
softmmu: Add qemu_init_arch_modules()
exec/cpu: Make address_space_init/reloading_memory_map target agnostic
exec/gdbstub: Make gdb_exit() / gdb_set_stop_cpu() target agnostic
misc: Add missing "sysemu/cpu-timers.h" include
misc: Remove unnecessary "sysemu/cpu-timers.h" include
softmmu/cpu-timers: Remove unused 'exec/exec-all.h' header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG,
disable this feature for machine versions prior to 7.0.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The qemu_oom_check() function, which we define in both oslib-posix.c
and oslib-win32.c, is now used only locally in that file; make it
static.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-3-peter.maydell@linaro.org
Function qemu_dirent_dup() is currently only used by 9pfs server, so move
it from project global header osdep.h to 9pfs specific header 9p-util.h.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA_=HAUNomKD2wurSVaAHa5mrk22A1oHKLWUDjk7v6Khmg@mail.gmail.com/
Based-on: <20220227223522.91937-12-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <E1nP9Oz-00043L-KJ@lizzy.crudebyte.com>
- Guard Linux only headers.
- Add qemu/statfs.h header to abstract over the which
headers are needed for struct statfs
- Define `ENOATTR` only if not only defined
(it's defined in system headers on Darwin).
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
While it might at first appear that fsdev/virtfs-proxy-header.c would
need similar adjustment for darwin as file-op-9p here, a later patch in
this series disables virtfs-proxy-helper for non-Linux. Allowing
virtfs-proxy-helper on darwin could potentially be an additional
optimization later.
[Will Cohen: - Fix headers for Alpine
- Integrate statfs.h back into file-op-9p.h
- Remove superfluous header guards from file-opt-9p
- Add note about virtfs-proxy-helper being disabled
on non-Linux for this patch series]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-2-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The new block driver simply utilizes snapshot-access API of underlying
block node.
In further patches we want to use it like this:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.
The other possible application is exporting internal snapshots of
qcow2, like this:
[guest] [NBD export]
| |
| root | root
v file v
[qcow2]<---------[snapshot-access]
For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to wait for all intersecting requests.
To be used in the further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.
Note: while being here, fix tiny typo in MAINTAINERS.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This can allow the guest OS to determine more easily if i8042 controller
is present in the system or not, so it doesn't need to do probing of the
controller, but just initialize it immediately, before enumerating the
ACPI AML namespace.
The 8042 bit in IAPC_BOOT_ARCH was introduced from ACPI spec v2 (FADT
revision 2 and above). Therefore, in this change, we only enable this bit for
x86/q35 machine types since x86/i440fx machines use FADT ACPI table with
revision 1.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-5-f4bug@amsat.org>
module_allow_arch() is the single target-specific call in the
whole vl.c file. Move the module initialization out to arch_init.c,
that way we'll be able to build vl.o once for all targets (the
next commit).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-21-f4bug@amsat.org>
cpu_address_space_init() and cpu_reloading_memory_map() are
target-agnostic, but are declared in "exec/exec-all.h" which
contains target-specific declarations. Any target-agnostic
source including "exec/exec-all.h" becomes target-specific and
we have to compile it N times for the N targets built. In order
to avoid that, move the declarations to "exec/cpu-common.h" which
only contains target-agnostic declarations.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-20-f4bug@amsat.org>
gdb_exit() and gdb_set_stop_cpu() prototypes don't have to be
target specific. Remove this limitation to be able to build
softmmu/cpus.c and softmmu/runstate.c once for all targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-19-f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-18-f4bug@amsat.org>
Add cpus_are_resettable() to AccelOps, and implement it for the
KVM accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-12-f4bug@amsat.org>
Add cpu_thread_is_idle() to AccelOps, and implement it for the
KVM / WHPX accelerators.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE,
expose hax_allowed to hax_enabled() macro.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
kvm_on_sigbus() and kvm_on_sigbus_vcpu() prototypes don't have
to be target specific. Remove this limitation to be able to build
softmmu/cpus.c once for all targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-7-f4bug@amsat.org>
target_ulong is target-specific, while vaddr isn't.
Remove the unnecessary "exec/cpu-defs.h" target-speficic header
from "memory_mapping.h" and use the target-agnostic "hw/core/cpu.h"
locally in memory_mapping.c.
Remove "exec/memory.h" since MemoryRegion is forward-declared in
"qemu/typedefs.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-6-f4bug@amsat.org>
cpu_memory_rw_debug() is declared in "exec/cpu-all.h" which
contains target-specific declarations. To be able to use it
from target agnostic source, move the declaration to the
generic "exec/cpu-common.h" header.
Replace the target-specific 'target_ulong' type by 'vaddr'
which better reflects the argument type, and is target agnostic.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-5-f4bug@amsat.org>
Move vaddr type declaration to the generic "exec/cpu-common.h" header.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-4-f4bug@amsat.org>
event_notifier_get_fd(const EventNotifier *e) always returns
EventNotifier's read file descriptor (rfd). This is not a problem when
the EventNotifier is backed by a an eventfd, as a single file
descriptor is used both for reading and triggering events (rfd ==
wfd).
But, when EventNotifier is backed by a pipe pair, we have two file
descriptors, one that can only be used for reads (rfd), and the other
only for writes (wfd).
There's, at least, one known situation in which we need to obtain wfd
instead of rfd, which is when setting up the file that's going to be
sent to the peer in vhost's SET_VRING_CALL.
Add a new event_notifier_get_wfd(const EventNotifier *e) that can be
used to obtain wfd where needed.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220304100854.14829-2-slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit
f862ddbb1a (hw/i386: Remove the deprecated pc-1.x machine types)
removed the last user of broken APIC ID compat knob,
but compat_apic_id_mode itself was forgotten.
Clean it up and simplify x86_cpu_apic_id_from_index()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220228131634.3389805-1-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On some older software like Windows 7 installer, having both a PS/2
mouse and USB mouse results in only one device working property (which
might be a different device each boot). While the workaround to not use
a USB mouse with such software is valid, it creates an inconsistent
experience if the user wishes to always use a USB mouse.
This introduces a new machine property to inhibit the creation of the
i8042 PS/2 controller.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220227210655.45592-1-j@getutm.app>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
on creation a PCIDevice has power turned on at the end of pci_qdev_realize()
however later on if PCIe slot isn't populated with any children
it's power is turned off. It's fine if native hotplug is used
as plug callback will power slot on among other things.
However when ACPI hotplug is enabled it replaces native PCIe plug
callbacks with ACPI specific ones (acpi_pcihp_device_*plug_cb) and
as result slot stays powered off. It works fine as ACPI hotplug
on guest side takes care of enumerating/initializing hotplugged
device. But when later guest is migrated, call chain introduced by]
commit d5daff7d31 (pcie: implement slot power control for pcie root ports)
pcie_cap_slot_post_load()
-> pcie_cap_update_power()
-> pcie_set_power_device()
-> pci_set_power()
-> pci_update_mappings()
will disable earlier initialized BARs for the hotplugged device
in powered off slot due to commit 23786d1344 (pci: implement power state)
which disables BARs if power is off.
Fix it by setting PCI_EXP_SLTCTL_PCC to PCI_EXP_SLTCTL_PWR_ON
on slot (root port/downstream port) at the time a device
hotplugged into it. As result PCI_EXP_SLTCTL_PWR_ON is migrated
to target and above call chain keeps device plugged into it
powered on.
Fixes: d5daff7d31 ("pcie: implement slot power control for pcie root ports")
Fixes: 23786d1344 ("pci: implement power state")
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2053584
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220301151200.3507298-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Type name will be used in followup patch for cast check
in pcihp code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220301151200.3507298-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU side has already imported pvpanic.h from linux, remove bit
definitions from include/hw/misc/pvpanic.h, and use
include/standard-headers/linux/pvpanic.h instead.
Also minor changes for PVPANIC_CRASHLOADED -> PVPANIC_CRASH_LOADED.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220221122717.1371010-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since 2020, linux kernel started to export pvpanic.h. Import the
latest version from linux into QEMU.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220221122717.1371010-1-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Message-Id: <20220217174504.1051716-5-lukasz.maniak@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convenience function for retrieving the PCIDevice object of the N-th VF.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Knut Omang <knuto@ifi.uio.no>
Message-Id: <20220217174504.1051716-4-lukasz.maniak@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch provides the building blocks for creating an SR/IOV
PCIe Extended Capability header and register/unregister
SR/IOV Virtual Functions.
Signed-off-by: Knut Omang <knuto@ifi.uio.no>
Message-Id: <20220217174504.1051716-2-lukasz.maniak@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the virtio-iommu device must be programmed before it allows
DMA from any PCI device. This can make the VM entirely unusable when a
virtio-iommu driver isn't present, for example in a bootloader that
loads the OS from storage.
Similarly to the other vIOMMU implementations, default to DMA bypassing
the IOMMU during boot. Add a "boot-bypass" property, defaulting to true,
that lets users change this behavior.
Replace the VIRTIO_IOMMU_F_BYPASS feature, which didn't support bypass
before feature negotiation, with VIRTIO_IOMMU_F_BYPASS_CONFIG.
We add the bypass field to the migration stream without introducing
subsections, based on the assumption that this virtio-iommu device isn't
being used in production enough to require cross-version migration at
the moment (all previous version required workarounds since they didn't
support ACPI and boot-bypass).
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-3-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SC is required for some kernel features like vhost-vDPA. So this patch
implements basic SC feature. The idea is pretty simple, for software
emulated DMA it would be always coherent. In this case we can simple
advertise ECAP_SC bit. For VFIO and vhost, thing will be more much
complicated, so this patch simply fail the IOMMU notifier
registration.
In the future, we may want to have a dedicated notifiers flag or
similar mechanism to demonstrate the coherency so VFIO could advertise
that if it has VFIO_DMA_CC_IOMMU, for vhost kernel backend we don't
need that since it's a software backend.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220214060346.72455-1-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are some operation sizes in some subsets of AVX512 that
are missing from previous iterations of AVX. Detect them.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We've had placeholders for these opcodes for a while,
and should have support on ppc, s390x and avx512 hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last entry of DEF_HELPERS_FLAGS_n is DEF_HELPER_FLAGS_7 and
thus the MAX_OPC_PARAM_IARGS should be 7.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20220227113127.414533-2-ziqiaokong@gmail.com>
Fixes: e6cadf49c3 ("tcg: Add support for a helper with 7 arguments")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The job API will be handled separately in another serie.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-31-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Assertions in the callers of the function pointrs are already
added by previous patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220303151616.325444-30-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-28-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to the header split, also the function pointers in BlockDriver
can be split in I/O and global state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-26-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito