Should fix the VS2012 project files for when only VS2012 (and not VS2010) is installed.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5557 96395faa-99c1-11dd-bbfe-3dabce05a288
In this iteration, a simple read-ahead scheme is used where the next expected read begins as soon as the CDVD code calls FinishRead.
The expected improvement is close to 0 since a similar system is already in place in the core.
The next iteration should have an internal buffer, and use completion callbacks to initiate read-aheads as soon as the previous read is done, without waiting for the emulator to fetch the results of the previous operation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5486 96395faa-99c1-11dd-bbfe-3dabce05a288
NOTE: The 'glew' project does NOT build yet, but it will have to be decided how to approach the problem (String literal too long in glew.rc)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5382 96395faa-99c1-11dd-bbfe-3dabce05a288
All UI percentage values (framerates, zoom) are saved incorrectly when the number ends with 0n (e.g. 105 is saved as 150, 307 is saved as 370, etc). The problem becomes apparent when these values are loaded from the ini file after restarting pcsx2.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5369 96395faa-99c1-11dd-bbfe-3dabce05a288
Translators note: I save previous translation but a careful review is mandatory
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5366 96395faa-99c1-11dd-bbfe-3dabce05a288
* new dev option CMAKE_BUILD_PO: control regeneration of po file. By default true in release build
* Add a hack for multiarch version of wxwidget
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4951 96395faa-99c1-11dd-bbfe-3dabce05a288
onepad: properly connect the latest button
sdl: do not compile some useless files (which fail to compile on my system btw)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4879 96395faa-99c1-11dd-bbfe-3dabce05a288
Threading VU1 took a lot of rewrites and new code to make possible (MTGS, microVU, gifUnit...), but we finally got to the point where it was feasible, and now we've done it! (so now everyone can stop complaining that pcsx2 only takes advantages of 2 cores :p).
The speedups in the games that benefit from it are great if you have a cpu with 3+ cores (generally a 10~45% speedup), however games that are GS limited can be a slowdown (especially on dual core cpu's).
The option can be found in the speedhacks section as "MTVU (Multi-Threaded microVU1)". And when enabled it should should show the VU thread-time percentage on the title bar window (Like we currently do for EE/GS/UI threads).
It is listed as a speedhack because in order for threading VU1 to have been a speedup, we need to assume that games will not send gif packets containing Signal/Finish/Label commands from path 1 (vu1's xgkick). The good news is very-few games ever do this, so the compatibility of MTVU is very high (a game that does do this will likely hang).
Note: vs2010 builds and Linux builds need to be updated to include "MTVU.h" and "MTVU.cpp".
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4865 96395faa-99c1-11dd-bbfe-3dabce05a288
Pcsx2 now has a gifUnit class which acts like the ps2's gif and executes a single gif transfer at a time (and performs path arbitration according to priority and path3 slicing).
This new code is generally a speedup for most games. Particularly VU heavy games like GoW.
This revision breaks old saved state compatibility so don't update if you wish to keep playing with your old saved states.
Leave comments if this revision fixes or breaks anything...
Message to GS Plugin authors:
This new code now uses only 1 gif callback to transfer data to the gs plugin (GSgifTransfer).
pcsx2 also is garaunteed to send full GS primitives to the plugin. So you don't have to account for partial-transfers anymore.
Thanks goes out to shadowlady who tested around 500 games for me :D
Note 1: The old gif code is still in this revision, and can be enabled by the USE_OLD_GIF macro. The old code will be deleted soon.
Note 2: This revision also enables assertion dialogs in devel builds, and changed a lot of assume cases into assertions.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4821 96395faa-99c1-11dd-bbfe-3dabce05a288
* Gsopen2 support for GS plugins => Support of the PCSX2 GS window configuration panel. Support of all PCSX2 shortcut.
* new shortcut: shift-f12 to stole the input. ZZogl shortcut must be prefixed with ctrl
* onepad: Support/fix/improve of configuration gui, multiple key, mouse/wiimote for analog joystick, dualshock3/sixaxis (basic), dual pad and experimental forcefeedback
Note: it is advices to delete OnePAD.ini
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4731 96395faa-99c1-11dd-bbfe-3dabce05a288
- Reimplemented mini/max opcodes using integer comparison operations instead of double comparison. This results in a bit less code and integer operations tend to be faster than double ops (especially on AMD cpus). Thanks to pseudonym for the idea!
- Fixed some minor bugs in mVU dev builds.
pcsx2:
- Added __fc as a shorthand macro for __fastcall since we already have __ri and __fi macros.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4713 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake:
* disable fomit-frame-pointer which cause crash with gcc-4.6 (it was not enabled by default but now I'm sure people will not enable it ;) )
* Try harder to pick the 32bits configuration for wx in a 64bits environment (opensuse/fedora).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4641 96395faa-99c1-11dd-bbfe-3dabce05a288
[0]: it needs gold linker, tuning parameter large-function-growth to 5000 and gcc-4.6.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4617 96395faa-99c1-11dd-bbfe-3dabce05a288
Details:
The major differences between install and portable modes should now be:
1. Portable mode doesn't use the registry at all.
2. Portable mode uses the folders inside pcsx2 folder as default (install mode has some default at "my documents").
3. Portable mode tries to save relative paths at the ini file where possible*.
Specifically, portable mode now allows to select custom folders for plugins, bios, etc via the standard UI, which allows using several portable pcsx2 folder sharing the same resources (bios, iso, memcards, etc).
* Relative paths where possible = the following sequence (thanks to pseudonym for the brilliant idea):
1. If the file/folder is inside pcsx2 folder, it's saved as completely relative (to pcsx2.exe)
2. Else, if the file/folder is at the same drive as pcsx2.exe, it's saved as absolute path without the drive letter (e.g. /ISO/...)
3. Else, saved as absolute path, including the drive letter (for linux, without drive letter naturally).
This allows to create a removable drive with (one or more) pcsx2 folder on it, configure all the files/folders to point to the same drive (ISOs, save states, etc), and then take this drive, plug it into another computer (where it will be assigned with a different drive letter), and everything will continue working.
Please test it if you can. Bugs here can be inconvenient...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4507 96395faa-99c1-11dd-bbfe-3dabce05a288
* Translate more stuff in various place
* Fix issue with pot generation on linux namely empty string & quote in asm comment
* add missing key on generate_pot script. Note: it also updates the po files with latest pot modification
* regenerate new pot & po files.
Translator note: previous Tertiary pot miss half of the strings.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4359 96395faa-99c1-11dd-bbfe-3dabce05a288
* add/update various translation
* add a patch of Weimingzhi to fix wrapping issue on asian languages.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4280 96395faa-99c1-11dd-bbfe-3dabce05a288
* PCSX2 now splits settings into two files: pcsx2-ui.ini and pcsx2-vm.ini. The former is user interface clutter (window positions, confirmation dialogs, etc). The latter is virtual machine settings, speed hacks, game fixes, etc.
* Added support for PORTABLE INSTALLS!! Portable install is currently manually enabled by adding an empty "pcsx2-portable.ini" to the install location of PCSX2. Portable installs should run seamlessly from any flash drive, etc. (and will usually need Admin rights)
* PCSX2 install location and plugins folders are stored in the registry now (unless portable install is enabled, in which case no registry is used).
Notes:
* A button to enable portable installs from within PCSX2 is planned.
* NSIS installer will hopefully be upgraded to allow for a portable install option as well.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4198 96395faa-99c1-11dd-bbfe-3dabce05a288
* Moved VIF dynamic recompiler buffers to the recompilers section of PCSX2.
* Using RecompiledCodeReserve for the VIF SSE functions.
* Minor bugfixes to VirtualMemory class implementations.
* Improved error handling and error message display.
* [TODO] : implement a call to cpuShutdown() to clean up VIF unpack/SSE reserves.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4169 96395faa-99c1-11dd-bbfe-3dabce05a288
* A couple i18n fixes listed in Issue 915, relating to dialog message formatting for a couple specific messages.
DevNote:
* Added some missing operator+() stuff for the pxsFmt string formatter.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4160 96395faa-99c1-11dd-bbfe-3dabce05a288
* Simplified and improved (slightly) the savestate memory cleanup on error/cancellation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4158 96395faa-99c1-11dd-bbfe-3dabce05a288
ramapcsx2