Commit Graph

70 Commits

Author SHA1 Message Date
lightningterror d7cdbf6f27 Gsdx: Point Sampler changes.
Re add point sampler to OpenGL. Fixes graphical issues when
Allow 8-bit textures is enabled on AMD gpus.
Issue: https://forums.pcsx2.net/Thread-GSDX-Hardware-mode-Bug-Report-Allow-8-bit-Texture

Adjust the code to be easier to read, and execute the gl code only on amd - suggested by Gregory.

Remove useless ATI_SUCKS define in tfx shader.It wasn't used anywhere outside of the shader.
2018-08-22 20:12:53 +02:00
lightningterror 11bad7b07a GSdx-d3d: Reduce state change - port from GL.
Commit: 37f9bcf9cb

Don't dirty aref when a fog color is uploaded.
Only set clamp mode in clamp mode (region clamp is handled in shader).
2018-08-21 13:56:06 +02:00
lightningterror 9769f19ebe GSdx: Remove fbmask handle in GSRendererDX.
It's already handled in texture shuffle code.
2018-03-27 15:11:08 +02:00
lightningterror 0e83b89dbd GSdx-D3D: Texture and channel shuffle improvements.
Texture Shuffle changes:
Always Enable Texture shuffle on D3D10/11.
Previously Texture shuffle was enabled if CRC hack
level was below Full, this was kinda not good since
D3D also relies on CRC hacks on Full so you could either
stick with texture shuffle or crc hacks.

Texture shuffle is not supported on D3D9, however we can do a partial
port where instead of vertical lines with the effect we get the effect
on the entire screen. Better than nothing I suppose.

Ported some of the code from OpenGL to D3D
( just a copy - paste job :) ),
part of the code misses a dedicated shader but we can still
use it to fix various issues on many games.

List of affected games tested so far:
The Godfather, Final Fight Streetwise, The Suffering Ties that Bind,
Urban Chaos have their vertical lines issues fixed
(highly possible for other games as well), MGS and Stolen see an improvement
but they are still broken without crc hacks. Other games that suffered
similar issues are probably affected as well.

Channel Shuffle changes:
Update Channel Shuffle detection. A lot of games should see an improvement,
MGS, Urban Chaos, Stolen have their top left corner issues resolved.
Other games should be affected as well that use similar logic.
They still miss a shader so some effects are still broken/show glitches
but it's a nice improvement for D3D users.

Shared changes:
Texture Shuffle and Channel shuffle have been moved to their
own dedicated functions. Should make things a bit cleaner.

Move part of the code for Texture Shuffle to GSRendererHW to be shared
across all HW renderers, should aboid copy paste/duplicate code.
2018-03-23 13:38:34 +01:00
Jonathan Li f64488f818 gsdx:d3d: Fix fbmask conversion on texture shuffle
Port of 6580f4922f.
2018-02-06 00:03:25 +00:00
lightningterror 687c0b45e2 Gsdx: Tekken 5 Channel effect and CRC Hacks
Move CRC hack to Partial that fix the half screen
bottom issue since the effect is not rendered correctly.

Move CRC hack to Aggressive. These hacks are only
needed when running upscaled resolution. They skip the
blur effect which cause ghosting and some other screen issues.
Side effect is they also remove the channel effect on OpenGL
which is emulated correctly so let's put them on Aggressive.

Comment out a hack, it's unknown what the hack does atm.
If there are new issues then it will be added back.

Added comments what the hacks do.

Partial port for channel shuffle effect to Direct3D for Tekken5.
The effect is skipped and not rendered but now the top left
screen glitch has been resolved.
Note: At least Minimum CRC level is required for this to work.
2017-12-13 13:31:49 +01:00
FlatOutPS2 82405982f7 GSdx: Add merge sprite hack to GSdx hacks dialog
Adds merge sprite hack to GSDx hacks dialog

And ports merge sprite hack to Direct3D renderers.
Special thanks to my keyboards Ctrl, c and v buttons for all their hard
work in porting this hack.
2017-04-01 11:16:25 +02:00
FlatOutPS2 557b672232 GSdx: Unscale Point and Line Direct3D11 port
Ports the "Unscale Point and Line" hack to the Direct3D11 Hardware renderer.

And enables the "Unscale Point and Line" hack for Custom Resolutions with Direct3D11 and OpenGL.
2017-04-01 11:16:25 +02:00
FlatOutPS2 975441dfe9 GSdx: Direct3D port of HPO special/V2
Adds a port of the new Half-pixel Offset options for the Direct3D
Hardware renderers.
2017-04-01 11:16:25 +02:00
Akash f423cf73c4 GSdx: Fix Alpha test value initialization
Alpha test should only be disabled when writes to all of the alpha bits in the Framebuffer are masked. Fixes a regression in Dragon Ball Z: Budokai 3 scouter image rendering.
2017-03-11 17:40:28 +01:00
Gregory Hainaut b54a824abd gsdx: split texture filtering option
Bilinear applies to all renderer
* Common code done in GSVertexTrace
* Extend it with forced but sprite (trade-off between linear/upscale glitches)
* Linux GUI option was moved at the top with the renderer selection

Trilinear is moved to OGL hack

close #1837

Thanks to Flatout for the review and feedback.
It will take care to update the Window GUI :)
2017-03-10 18:05:34 +01:00
Akash ff89619b09 GSdx: Add an Enumeration for CRC Hack level 2017-02-21 10:54:03 +01:00
Gregory Hainaut 1e7fd83ac5 gsdx|spu2x: fix %d/%u in printf (cppcheck) 2017-01-22 21:10:40 +01:00
Akash 45be4626f6 GSDX: Add an enum for texture filtering
Also re-order the combobox to make it look consistent with the tooltip description.
2016-10-16 17:36:30 +01:00
FlatOutPS2 357dcdb55e GSdx: Move alpha stencil hack back to original location
Avoids skipping the alpha stencil hack.
2016-10-14 16:36:17 +02:00
Gregory Hainaut 5ced9c1f19 gsdx mipmap:ogl: plug trilinear/mipmap2 option
mipmap option 3. Actually maybe a separate tri-linear option will be better

m_mipmap == 2 => use manual PS2 trilinear/mipmap
Otherwise
m_filter == 3 => always use full automatic trilinear interpolation
m_filter == 4 => use automatic trilinear interpolation when PS2 uses mipmap
m_filter == 5 => like 4 but force bilinear interpolation inside layer
2016-10-13 20:16:38 +02:00
Gregory Hainaut 1cc696ab31 gsdx hw: update TEST.ATE field after ATE optimization
Otherwise DoFirstPass/DoSecondPass will give you result based on pre-ATE optimization

Close #1607
2016-10-05 09:43:24 +02:00
Gregory Hainaut 49c44db635 gsdx:dx: make filtering right
WMS/WMT 2 is the region clamping mode.

Hw unit can't emulate it right so it can give you bad filtering (Fix #1025)

Note: I only did the fix because I wanted to remove the TEXA hack. Otherwise
it is still recommended to use openGL
2016-10-02 18:21:52 +02:00
Gregory Hainaut dc365e066d gsdx tc: remove old plain TEXA hack
It must work fine without it now.

From the google code comments:

It would be nice to test those games
* Ar Tonelico 2 (line in sprite regression?)
* breath of fire dragon quarter (overlayed user interface in the game)

v2: update Dx code to use the good format
2016-10-02 18:21:52 +02:00
Gregory Hainaut 3996fbe365 gsdx hw: reduce conplexity around TryAlphaTest
* As sw renderer, don't bother to bypass it when it is ATST_ALWAYS
* Don't update the ATE register value
=> It is a really bad idea. Next draw call will be wrong if TEST register isn't written.
The TryAlphaTest context could have been updated
2016-10-01 19:20:49 +02:00
Gregory Hainaut b91bd3ea01 gsdx dx/gl: fix potential bug in alpha test handling
Depth test must remain disabled if write were masked.

Bug was detected on ICO (sea/sky) but the previous commit removes
the wrong ATE draw call.
2016-09-19 08:56:49 +02:00
Gregory Hainaut 6966e08306 gsdx: move alpha test optimization in base class
One code for all renderers :)
2016-09-19 08:48:32 +02:00
Gregory Hainaut 6558317a7e gsdx: s/m_eq.xzyf & 4/m_eq.z/
Much better this way
2016-09-18 18:50:15 +02:00
FlatOutPS2 e5c6b2e952 GSdx DX: extend ATE to better support additional corner case DX port
Port for Direct3D renderers of PR #1538.
2016-08-28 15:13:15 +02:00
Gregory Hainaut b6693c4345 gsdx dx/gl: fix depth optimization
4th bit is the fog value, not the depth
2016-08-27 13:57:39 +02:00
FlatOutPS2 87eed3965e GSDx GSRendererDX code improvement
Replace local copies context and env with m_ prefix originals.
2016-08-19 16:02:49 +02:00
FlatOutPS2 c5cd716c20 Gsdx alpha test improvement DX
Port for the DX renderers of the alpha test improvement for OGL created by gregory38.
2016-08-19 15:59:54 +02:00
Gregory Hainaut a9c18c57e4 gsdx option: use the new GetConfig* function
v2:
add PSX stuff
ssakash review
2016-05-28 10:07:27 +02:00
Gregory Hainaut 12b8704502 gsdx dx: disable channel shuffle 2016-04-30 14:52:43 +02:00
refractionpcsx2 dcb676765e GSdx: Clean up some warning under windows (#1289) 2016-04-14 11:00:58 +01:00
Gregory Hainaut fc98fc9781 gsdx: only enable "please fix me" message on debug build 2016-01-02 18:53:15 +01:00
Gregory Hainaut 3784ea768f gsdx: check null pointer when doing a texture clear 2015-08-04 19:26:17 +02:00
Gregory Hainaut 831c24de51 gsdx-dx: only enable new code when CRC is below FULL level
Code is not ready. It allow to test the new code without a massive
regression
2015-07-01 09:36:54 +02:00
Gregory Hainaut 3b127f663b gsdx-tc: trace the texture format to detect texture shuffling
It fixes games that uses 16 bits RT (like snow engine games)
2015-07-01 09:36:53 +02:00
Gregory Hainaut 05c72980fc gsdx: avoid to detect PSMT8H as 16 bits 2015-07-01 09:30:20 +02:00
refractionpcsx2 955fc3aa35 GSdx-DX: Mirror round value change from OGL 2015-07-01 09:30:20 +02:00
refractionpcsx2 4bc8bfc23e GSdx-DX: Rough port of texture switching from OGL 2015-07-01 09:30:20 +02:00
Gregory Hainaut 35081f922a gsdx: GS kinds of support draw without framebuffer
Gow uses 24 bits buffer, so only color is updated but blending is configured as Cd
so it is a NOP

In this case, we don't lookup the target in the texture cache. It reduces the complexity
to handle depth which can be located at same address as RT

Note: please test DX renderer
2015-07-01 09:30:20 +02:00
Gregory Hainaut d870188d21 gsdx: sed/o/off/ 2015-05-15 20:40:09 +02:00
Gregory Hainaut 65a84b9f64 gsdx hack: drop previous filtering hack
superseeded by UserHacks_round_sprite_offset
2015-04-15 09:26:01 +02:00
Gregory Hainaut 98d8ad7484 gsdx: new anti-glitches upscaling hack: UserHacks_round_sprite_offset
It is replacement of the previous hack (UserHacks_stretch_sprite). Don't enable both in the same time!

The idea of the hack is to move the sprite to the pixel boundary. It
avoids most of rounding issue. It also rescales verticaly the sprite (avoid horizontal line on ace combat).
I don't like this rescaling maybe we can limit it to only 1 pixels.

On my limited testcase, results are much better with any upscaling factor.

I still have a bad line in Kingdom heart. If you have issue with others
game please provide us a GS dump.
2015-04-07 19:18:24 +02:00
Gregory Hainaut 5269e54f02 gsdx: tune previous hack
Only disable bilinear on the sprite that were forced by the user.
If the PS2 requires a bilinear filtering, there is likely a big enough texture
2015-04-03 20:09:02 +02:00
Gregory Hainaut e1a5736583 gsdx: anti-upscale-glitch hack UserHacks_SkipDraw
2x upscaling is pixel perfects. Bigger upscaling is better but not yet perfect

Feedbacks are welcomes (note it doesn't solve all upscaling issue, only wrong texture sampling)

For the history:
If you have a texture of [0;16[ texels and draws a primitive [0;16[

The formulae to sample last pixels of texture is
0.5 + (16*s-1)/(16*s) * 16
Native (s==1): 15.5 (good)
2x     (s==2): 16 (bad, outside of the texture)
4x     (s==4): 16.25 (bad, really outside of the texure))
2015-04-03 18:33:05 +02:00
gabest11@gmail.com d27b606e5c GSdx:
- changed the KH2 fix in GetTextureMinMax to my taste, should give the same results, when the used texture rect is to the left/above the clamped area, it returns [min, min+1], and [max-1, max] for right/below
- m_mem.m_clut.Read32 was returned to its original place from GetAlphaMinMax
- UserHacks_WildHack was moved up to GSState, special UV handlers are only used when this setting is active
- updated xbyak to the latest available (avx2 seems incomplete, the 256-bit promoted old instructions are missing)
- changed vtune's include path to the 2013 edition

Some other not yet commited changes from a year ago:
- WriteImageX overflow crash-fix
- moved colclamp after dithering (sw mode), it makes more sense, no visible changes noticed
- Gif_Tag::analyzeTag(), there was a conditional I didn't like, split the loop into two parts

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5649 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-06-06 11:36:01 +00:00
ramapcsx2 94cad4a61a GSdx: New hack from KrossX lets users configure their own texture coordinate offset via hacks dialog. This can be used to fine tune correction of upscale glitches versus the problems that come with it. I guess this is able to correct nearly all ghosting and bad text issues games can have! Thanks for this nice patch, KrossX :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5556 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-02-12 10:57:48 +00:00
sudonim1@gmail.com b1536a755f GSDX: Nothing is fixed, the last two revisions did not happen.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5549 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-02-08 15:36:54 +00:00
sudonim1@gmail.com 23cd8fd641 GSDX: Committing pointless extra work for the record before reverting. Everything is terrible.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5548 96395faa-99c1-11dd-bbfe-3dabce05a288
2013-02-08 15:35:28 +00:00
gregory.hainaut e06484adb8 gsdx: update the copyrigh address thank to sed
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5412 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-09-09 18:16:11 +00:00
sudonim1@gmail.com 5f28d08286 GSDX: New interpretation of destination alpha testing to improve effect rendering as an optional hack. Known to make shadows in the persona games (and thus probably shin megami tensei) better, not sure what else it accomplishes without destroying other effects.
Now, a note about the actual issue.  Destination alpha tests can be used on the GS as one of the workarounds for a lack of stencils.  If you use a destination alpha test and leave alpha writing on, the GS will only write each pixel until you write an alpha value which would fail the test.  This works to a point in gsdx without further hacking, but that point is when within a single batch of primitives the same pixels are written multiple times and the destination alpha test is expected to update.  I did experimentally make a tight loop updating the stencil with a draw then drawing for one primitive at a time, but it was prohibitively slow (over 80% fps loss, you really don't want to know).

Destination alpha testing cannot be directly implemented in D3D9 or D3D10, but (probably) can in D3D11 (with a speed hit for sure, but I doubt it'll be 80%).  I'll be getting a new graphics card and looking into that.

And before some idiot says it, the answer is no.  OpenGL does not help.

git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5346 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-07-24 02:20:07 +00:00
sudonim1@gmail.com 8a20e5af90 GSDX: Quick ugly fix (major work on this function might be done soon) for a bug with colclamp I noticed. Unknown impact, might make some effects work.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5344 96395faa-99c1-11dd-bbfe-3dabce05a288
2012-07-23 20:24:09 +00:00