* Fix context code for the common shader and set the indices for the uniform... (will fix most of GLSL-related black screen issue)
* some memory improvements were not merged from zzogl-dev branch
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5252 96395faa-99c1-11dd-bbfe-3dabce05a288
Examples of speed ups:
Outrun 2006
before 43.4 - 45.7
after 44.7 - 47.33
Grand Theft Auto: San Andreas
before 63 - 66.9
after 66 - 69.5
Need for Speed Most Wanted
before 33.0 - 33.3
after 33.22 - 33.57
Burnout 2
before 46.5 - 48.3
after 53.2 - 55.5
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5246 96395faa-99c1-11dd-bbfe-3dabce05a288
* new language ms_MY
* update sv_SE, tr_TR, es_SE,zh_CN
If I forget someone ping me ;)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5234 96395faa-99c1-11dd-bbfe-3dabce05a288
glsl4: Replace some define with function (ogl4 support function pointer). Explain how depth is computed in vertex shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5233 96395faa-99c1-11dd-bbfe-3dabce05a288
*Noted small speed boosts on some games (Outrun up from 48fps to 52fps, MGS3 potentially gaining 1fps, Sega Tennis possibly 0.5fps), could be a freak occurrance tho :P
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5228 96395faa-99c1-11dd-bbfe-3dabce05a288
-Path3 Masking Changes, Gif Unit now rolls the DMA back (Path3 only) if it is using the Masking and finishes mid DMA packet.
-Vif modified to be simpler in the transfer loop and fixes issues where Flushes are called at the end of a DMA packet.
Game fixes from changes:
Outrun 2006 - Water textures and general flickering fixed, also SW mode not required for half screen issue. Caused by GIF Path 3 stopping in the wrong place.
Star Wars Episode 3: Revenge of the Sith - DMA timeouts caused by Flush at end of packet.
Had to break savestates (version change!), sorry :(
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5224 96395faa-99c1-11dd-bbfe-3dabce05a288
- Added "Aggressive-CRC" checkbox at the HW hacks section of the config dialog.
- The following hacks are now activated only in aggressive mode:
- God of War 2: disable water effect/lines, disable global haze.
- FFX, FFX2, SSX3 (the full crc hack from r5214).
- Shadow of the Colossus: disable (over)bloom.
- Reverted the Valkyrie Profile 2 hack to pre- r5214.
- Some CRC fixes by comments on r5214.
- Regression fix of dynamic crc hack (INITIAL_MODE = 0 didn't compile)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5221 96395faa-99c1-11dd-bbfe-3dabce05a288
VIF Stall Delay hack: Modified slightly for Onimusha Blade Warriors. This expects the end of the packet to all be in the VIF1 FIFO (which doesn't exist) and the VIF to have finished, so the Stall is technically ignored now, doesn't hurt SOCOM 2.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5220 96395faa-99c1-11dd-bbfe-3dabce05a288
* properly release shader in release mode
* set stream format every time an array buffer is bound
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5219 96395faa-99c1-11dd-bbfe-3dabce05a288
.
Allows to have a single dynaCRC DLL for several games, differentiated by their CRCs by using the new utility IsCRC(0x12345678, 0x87654321, ...).
Note: With old GSdx (and updated new DynaCrcHack.c), IsCRC always returns false.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5215 96395faa-99c1-11dd-bbfe-3dabce05a288
- 14 Updated hacks, 41 new hacks (See full list at the first comment).
- New crc-hacks might have patial crc lists, so it's possible that some copies won't get the benefit (yet).
- Non crc-hacks code was NOT imported from Cutie, so some crc hacks might not be as effective as within Cutie itself.
- New region: CH, few more CRCs.
Note:
Due to the very big list of affected games, I couldn't test the vast majority of them, and so your help would be appreciated in testing. Please report (even if someone else already reported with the same result as yours) with the following format:
<game name> - <better/worse/same> (reason) - tested <little/medium/much>
e.g.:
Tomb Raider Legend - Better (removes garbage graphics) - tested a little.
GTA San Andreas - Better (removes ghosts) - tested a little.
And of course, big thank you goes to the author of Cutie, for the time put into improving PCSX2, and for respecting the GPL license and releasing the code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5214 96395faa-99c1-11dd-bbfe-3dabce05a288
* some parameters was set after the shader setup. Extend the API to do the shader setup before the draw
* remove the useless shader compatibility bits
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5212 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix properly context, directly save the state in the shader
* replace the last deprecated variable in the shader. Remain the issue that host enable 1 output and the shader write 2 outputs
* It seems that VBO does't depends on the VAO but vertex format depends on both VBO/VAO so I set the format multiple time. Not sure the behavior is fully correct
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5211 96395faa-99c1-11dd-bbfe-3dabce05a288
zzogl: rework the shader interface to use struct like CG. Shader are still broken because some variables (gl_color & gl_secondary_color) are not supported in vertex shader...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5209 96395faa-99c1-11dd-bbfe-3dabce05a288
* use 128 vertex buffer instead of 512 that will avoid to fill the GPU vram
* Use separate shader infrastructure for GLSL 4 as Nvidia cg. Beside code is much easier to understand
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5208 96395faa-99c1-11dd-bbfe-3dabce05a288
various: apply some patch of Micove to disable debug logging in GSdx release mode
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5206 96395faa-99c1-11dd-bbfe-3dabce05a288
* Use some (lots) of improvement from Micove package
* Merge all binary package into 1 would be easier for everyone
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5204 96395faa-99c1-11dd-bbfe-3dabce05a288
* Clean the zzsetparameter API to always use the program for uniform that depends on the program. Future goal is to use a nice OO interface
* Use uniform buffer. Would allow future optimization and remove most initialization stuff. Don't support yet the 2 zzogl contexts.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5201 96395faa-99c1-11dd-bbfe-3dabce05a288
* drop hack for of Natty and use the std FindGtk2 module, time to upgrade to Precise.
* Bump cmake requirement to 2.8.5 to avoid multiarch issue
* Create new cmake variable GLSL_SHADER_DIR for glsl file. Default value /usr/share/games/pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5200 96395faa-99c1-11dd-bbfe-3dabce05a288
pcsx2: don't print window title in fullscreen because it create a white frame flickering. Seem like a wx regression
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5199 96395faa-99c1-11dd-bbfe-3dabce05a288
Previously: All presets set MTVU to disabled.
Now: Presets don't affect MTVU (except for the first preset, which disables speed hacks altogether, so MTVU gets disabled implicitly)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5196 96395faa-99c1-11dd-bbfe-3dabce05a288
gregory.hainaut