byuu says:
Changelog:
- hiro: added Label::set(Background,Foreground)Color (not implemented
on Cocoa backend)
- hiro: added (Horizontal,Vertical)Layout::setPadding()
- setMargin(m) is now an alias to setPadding({m, m, m, m})
- hiro/Windows: update Label rendering to draw to an offscreen canvas
to prevent flickering
- sfc: reverted back to 224/240-line height (from 223/239-line height
in earlier v106 WIPs)
- bsnes: new multi-segment status bar added
- bsnes: exiting fullscreen mode will resize and recenter window
- this is required; the window geometry gets all scrambled when
toggling fullscreen mode
- bsnes: updated to a new logo [Ange Albertini]
Errata:
- hiro/Windows: try to paint Label backgroundColor quicker to avoid
startup flicker
- `WM_ERASEBKGND` fallthrough to `WM_PAINT` seems to work
- hiro/Qt: use Window backgroundColor for Label when no Label
backgroundColor set
- bsnes: update size multipliers in presentation.cpp to 224/240 (main
window size is off in this WIP)
byuu says:
Changelog:
- hiro: added BrowserDialog::openObject() [match file *or* folder
by filters]
- hiro: BrowserDialog accept button is now disabled when it would
otherwise do nothing
- eg openFile without a folder to enter or file to open selected
- eg saveFile without a file name or with a file name that matches
a folder name
- bsnes: added support for gamepaks (game folders)
- bsnes: store all save states inside per-game .bsz (ZIP) archives
instead of .bst/ folders
- this reduces the number of state files from 10+ to 1; without
having folders sort before files
- hiro: both gtk2 and gtk3 now use cairo to render Canvas; supports
sx,sy [BearOso]
- higan, bsnes: fast PPU/DSP are now run-time options instead of
compile-time options
- bsnes: disable fast PPU when loading Air Strike Patrol / Desert
Fighter
- bsnes: disable fast DSP when loading Koushien 2
- bsnes: added options to advanced panel to disable fast PPU and/or
fast DSP
byuu says:
Changelog:
- ruby/video: implement onUpdate() callback to signal when redraws are
necessary
- ruby/video/GLX,GLX2,XVideo,XShm: implement onUpdate() support
- bsnes: implement Video::onUpdate() support to redraw Viewport icon
as needed
- bsnes: save RAM before ruby driver changes
- sfc/sa1: clip signed multiplication to 32-bit [Jonas Quinn]
- sfc/sa1: handle negative dividends in division [Jonas Quinn]
- hiro/gtk3: a few improvements
- bsnes: added empty stub video and audio settings panels
- bsnes: restructured advanced settings panel
- bsnes: experiment: input/hotkeys name column bolded and colored for
increased visual distinction
- bsnes: added save button to state manager
byuu says:
Changelog:
- nall: renamed array to adaptive_array; marked it as deprecated
- nall: created new array class; which is properly static (ala
std::array) with optional bounds-checking
- sfc/ppu-fast: converted unmanaged arrays to use nall/array (no speed
penalty)
- bsnes: rewrote the cheat code editor to a new design
- nall: string class can stringify pointer types directly now, so
pointer() was removed
- nall: added array_view and pointer types (still unsure if/how I'll
use pointer)
byuu says:
Changelog:
- sfc/ppu-fast: fixed overscan crash
- sfc/ppu-fast: fixed direct color mode
- sfc: reconnected MSU1 support
- higan: game.sfc/msu1/data.rom, game.sfc/msu1/track-#.pcm
- bsnes: game.msu, game-#.pcm
- bsnes: added cheat code editor
- bsnes: added cheat code database support
- sfc/ppu-fast: clear overscan lines when overscan disabled
- sfc: output 223/239 lines instead of 224/240 lines
- bsnes: fix aspect correction calculation
- bsnes: crop line 224 when overscan masking is enabled
- bsnes: exposed Expansion Port menu; but hid “21fx” from the list of
devices
- bsnes: tools menu is hidden until a game is loaded
- ruby/input/keyboard/quartz: fixed compilation error
So only bsnes the automated overscan cropping option. In higan, you can
crop however many lines you like from the top or bottom of the image.
But for bsnes, it automatically eats sixteen lines. My view right now is
that if bsnes is meant to be the casual gaming emulator, that it should
eat line 224 in this mode. Most games show content here, but because of
the way the SNES PPU works, the very last line ends up on its very own
tile row (line 0 isn't rendered), if the scroll registers don't account
for it. There's a small number of games that will draw junk data to the
very last scanline of the frame as a result of this. So I chose, at
least for now, to hide it. Users can obviously disable overscan cropping
to see this scanline. I'm open to being convinced not to do this, if
someone has a compelling reason.
We're pretty much screwed one way or the other with no overscan masking.
If we output 239 lines, then most games will render 7 blank lines + 224
drawn lines + 8 blank lines, and the black top and bottom aren't
centered. But if we output 240 lines to get 8 + 224 + 8, then games that
do use overscan will have a blank line at the very bottom of the window.
I'm also trying out a modified cheat code file format. It's been forever
since I bothered to look at it, and the “cartridge” parent node doesn't
match what I'm doing with trying to rename “cartridge” to “game” in
manifests. And indeed, the idea of requiring a root node is rather
superfluous for a cheat code file. Current format looks like this:
cheat
description: foo
code: 7e2000=20+7e2001=30?40
enabled
cheat
description: bar
code: 7e4000=80
Open to discussing this, and I'd like to sync up with Snes9X before they
push out a new release, and I'll agree to finalize and never change this
format again.
I chose to use .cht for the extension when using game files (eg
gamename.cht)
byuu says:
Changelog:
- sfc/ppu-fast:
- don't use mosaicSize unless mosaicEnable is set
- fix background tiles that aren't 8x8 in size
- flush (render) queued lines whenever VRAM or OAM are modified
mid-frame
- queue tile outputs to buffer for object rendering final pass
- fix object window mask indexing
- disable color bleed when output width is 256 pixels
- handle reset(bool) events
- implemented save states
- icarus: fixed SPC7110-RAM-EPSONRTC mapping typo [hex_usr]
- bsnes: fixed overscan masking mode when output height is 240
Todo:
- sfc/ppu-fast: should not have deleted the tilecache freeing in
~PPU()
- ruby/input/carbon: change setPath() call to setPathID()
Errata:
- Rendering Ranger R2 crashes at startup, seems to be an issue with
the expansion port device
Bug reports on the new fast SNES PPU are now welcome.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
byuu says:
Changelog:
- sfc/ppu-fast: everything other than vertical mosaic and interlace
support is in
Games are quite playable now, and you're welcome to try things out, but
please don't report bugs yet. It's still too early for that.
byuu says:
Changelog:
- sfc/ppu-fast: added a barebones background renderer; very incomplete
Right now, the 2bpp Mega Man X2 splash screen is rendering correctly,
but everything else looks really garbled. I'm thinking my tile cache
conversions from 4bpp to bitmap pixels is wrong, but I'm not seeing any
obvious issues.
If anyone wants to take a look at it, I'd appreciate it. The renderer is
mostly modeled after ppu-performance's.
byuu says:
Changelog:
- nall/GNUmakefile: fixed findstring parameter arguments [Screwtape]
- nall/Windows: always include -mthreads -lpthread for all
applications
- nall/memory: code restructuring
I really wanted to work on the new PPU today, but I thought I'd spend a
few minutes making some minor improvements to nall::memory, that was
five and a half hours ago. Now I have a 67KiB diff of changes. Sigh.
byuu says:
Changelog:
- sfc/ppu: collapsed folders to a single directory to match all other
emulated processors
- sfc/ppu-fast: implemented I/O registers
byuu says:
Changelog:
- SNES: started on skeleton of the new parallel PPU core
To build the new PPU core, set profile=fast via GNU make. The old core
is profile=accurate.
The names of the profiles, and the name of the folder for the fast PPU
are subject to change.
The new PPU core doesn't do anything but demonstrate the proof of
concept: every scanline, make a copy of all the PPU registers and CGRAM.
Share the VRAM and OAM. Batch render all scanlines at once using OpenMP
at the end of each frame and blit the result.
With no PPU core at all, bsnes runs 91% faster than with the accuracy
PPU (230fps vs 120fps.) That's the absolute theoretical best-case
scenario. With the skeleton in place, we're already around 220fps. It'll
go down more as the PPU line renderer starts to do real work. I don't
know where things will end up yet. I suppose we'll find out in time.
My own copy of TDM/GCC can't use OpenMP on Windows, so ... it won't
parallelize if you build with that. I'm going to have to switch to a
different MinGW distribution once this is complete, I suppose.
byuu says:
Changelog:
- nall: added -static-libgcc -static-libstdc++ to Windows/GCC link
flags
- bsnes, higan: added program icons to main window when game isn't
loaded
- bsnes: improved recent games menu sorting
- bsnes: fixed multi-game recent game loading on Windows
- bsnes: completed path override support
- bsnes, higan: added screensaver suppression on Windows
- icarus: add 32K volatile RAM to SuperFX boards that report no RAM
(fixes Starfox)
- bsnes, higan: added automatic dependency generation [Talarubi]
- hiro/GTK: appending actions to menus restores enabled() state
- higan: use board node inside manifest.bml if it exists
- bsnes: added blur emulation and color emulation options to view menu
- ruby: upgraded input.sdl to SDL 2.0 (though it makes no functional
difference sadly)
- ruby: removed video.sdl (due to deprecating SDL 1.2)
- nall, ruby: improvements to HID class (generic vendor and product
IDs)
Errata:
- bsnes, higan: on Windows, Application::Windows::onScreenSaver needs
`[&]` lambda capture, not `[]`
- find it in presentation/presentation.cpp
byuu says:
Changelog:
* yes.
But seriously, a list of changes on a pre-alpha GUI is going to get annoying.
Basically, work on embedding stuff in the binary, firmware loading (both
appended to the ROM and in a firmware/ subfolder) added, SGB games can be
loaded, config file holds more values for driver settings, added ruby drivers to
other platforms, etc.
byuu says:
Changelog:
- created new bsnes target (it currently does nothing)
- Super Famicom: fixed BS Memory pack support in the MCC emulation
- icarus: fixed manifest-free support for BS Memory flash-based
cartridges
- icarus: database improvements
byuu says:
Changelog:
- higan: target-tomoko has been renamed to target-higan
- Super Famicom: event has been renamed to
processor(architecture=uPD78214)
- Super Famicom: SNES-EVENT supported once more; under board IDs
EVENT-CC92 and EVENT-PF94
- Super Famicom: SNES-EVENT preliminarily set up to use DIP switch
settings ala the Nintendo Super System (incomplete)
- Super Famicom: MCC PSRAM moved inside the MCU, as it is remappable
- Super Famicom: MCC emulation rewritten from scratch; it is now
vastly more accurate than before
- Super Famicom: added BSC-1A5B9P-01 board definition to database;
corrected BS-MCC-RAM board definition
- Super Famicom: moved SHVC-LN3B-01 RAM outside of
processor(identifier=SDD1)
- higan: when selecting a default game to load for a new system entry,
it will change the system option to match the media type
- higan: the load text box on the system entry window is now editable;
can be used to erase entries
- icarus: fixed bug in Famicom importing
- icarus: importing unappended SNES coprocessor firmware will now
rename the firmware properly
- hiro/GTK,Qt: WM_CLASS is now set correctly in `argv[0]`, so
applications should show “higan”, “icarus” instead of “hiro” now
Note: if you wish to run the BS-X town cartridge, the database currently
lists the download RAM as type “PSRAM”. This needs to be changed to
“RAM” in order to load properly. Otherwise, the emulator will bomb
out on the load window, because BSC-1A5B9P-01 expects PSRAM to always be
present, but it won't find it with the wrong memory type. I'll correct
this in the database in a later release. For now, you can copy the game
portion of the manifest to a new manifest.bml file and drop it into the
gamepak folder until I fix the database.
byuu says:
Changelog:
- Super Famicom: fixed loading of BS Memory and Sufami Turbo
cartridges
- Super Famicom: renamed NSS to DIP; as that's really all it is, it's
not true NSS emulation
- Super Famicom: slot loading now happens inside of board parsing
instead of generically in loadCartridge()
- Super Famicom: BS-X cartridges with flash memory now serialize their
data and write it out to disk¹
- icarus: fixed Famicom game importing (hopefully) and set file import
title to “Load ROM File”
¹: there's no emulation of write commands yet, so the data is never
going to change anyway. This is just in preparation for more advanced
emulation of BS Memory cartridges.
byuu says:
Changelog:
- Super Famicom: everything outside of Nintendo Super System, Campus
Challenge '92 and Powerfest '94 should play
- Super Famicom: removed RAM from coprocessor/event (should use global
RAM)
- Super Famicom: removed RAM from SDD1 (should use global RAM)
- icarus: fixed Super Famicom game importing [hex_usr]
Also worth reminding that you'll need to disable database lookup in
order to run the BS-X Town cartridge right now. Plus, Star Ocean's
database entry still has the RAM in the wrong spot. The MSU1 code is not
looking at the right locations for data, so it's not going to work in
this release either.
I need to figure out what to call coprocessor/event and coprocessor/nss,
as neither are slots or processors like everything else.
Outside of those issues, all games for all systems should be playable,
at least to the extent they were in v106.
byuu says:
Changelog:
- major restructuring of board manifests
- cleanup of generic board names
- Super Famicom: updates to SA1, SuperFX, Cx4, SPC7110, EpsonRTC,
SharpRTC load/save code
- Super Famicom: added experimental SuperFX plot dithering fix
[qwertymodo]
- higan, icarus: rename shared folders to lowercase names; put .sys
folders into new subfolder
- Video Shaders/ → shaders/
- Database/ → database/
- Firmware/ → firmware/
- \*.sys/ → systems/\*.sys/
So right now, only standard SNES games, SA-1, SuperFX, and Cx4 games
load. I have not tested SPC7110 or RTC support, because icarus import
seems to be completely broken? It's creating blank folders when I try it
now. I'll have to fix that ...
Since we are now up to thirteen systems, I've put the .sys folders into
a subfolder. This should declutter the main higan-windows release folder
a good deal. Linux users will need to re-run make install, or manually
move things into a new systems/ subfolder.
Same goes for icarus: lowercase the database/ and firmware/ folders or
re-run make install.
I don't know if qwertymodo's SuperFX fix is exactly correct or not.
Hopefully it is, but I didn't write a test ROM or anything to be
certain. Since SuperFX games should run, if people could please play
through some of them and look for any regressions, that'd be very much
appreciated.
byuu says:
Changelog:
- game/memory/type/battery → game/memory/volatile
- (manufacturer.)content.type → (architecture.)content.type
- nall: Markup::find() strips spaces from values in comparisons
- higan: updated game manifest loading/saving code for all cores
- GBA: flash memory ID is internally selected based on the
manufacturer and memory size
- SFC: ST018 (ARM6) frequency can be modified via game manifest now
- WS: EEPROM::name removed (not useful)
- icarus, genius: battery→volatile updates
I did my best to look over the diff between r13 and r14, but it's 84KiB
excluding the game database changes. It's just too much for me. I'd
greatly appreciate if someone could look over it and check for any
errors in this update. But more than likely, I suppose we'll iron out
any issues by determining which games fail to load.
Right now, I know the Super Game Boy support doesn't seem to work. But
all non-SFC cores should work fully, and all normal + NEC DSP SFC games
should work as well. Unsure about the rest.
Also, I'm planning to change the Game Boy “MBC1M” mapper to “MBC1#A” to
indicate it's an alternate wiring configuration of the stock MBC1, and
not a new mapper type.
byuu says:
Changelog:
- Emulator: update to final manifest syntax
- Super Famicom: new board syntax (still experimental)
- Super Famicom: match (manufacturer.)category.type instead of
(model.)category.type
Errata:
- Markup::Node::find() needs to be extended to support multiple
subtype matches
- Sufami Turbo ROM/RAM nodes are part of separate gamepaks; need to
refactor this
byuu says:
Changelog:
- manifest: memory/battery now resides under type at
memory/type/battery
- genius: volatile option changed to battery; auto-disables when not
RAM or RTC type
- higan: added new Emulator::Game class to parse manifests for all
emulated systems consistently
- Super Famicom: board manifest appended to manifest viewer now
- Super Famicom: cartridge class updated to use Emulator::Game objects
- hiro: improve suppression of userland callbacks once
Application::quit() is called
- this fixes a crash in genius when closing the window with a tree
view item selected
My intention is to remove Emulator::Interface::sha256(), as it's not
really useful. They'll be removed from save states as well. I never
bothered validating the SHA256 within them, because that'd be really
annoying for ROM hackers.
I also intend to rename Emulator::Interface::title() to label() instead.
Most everything is still broken. The SNES still needs all the board
definitions updated, all the other cores need to move to using
Emulator::Game.
byuu says:
Changelog:
- higan, icarus, genius: new manifest syntax (work in progress)
Pretty much only LoROM and HiROM SNES games will load right now, and RAM
will only work right if the save.ram file already exists to pull its
file size from (a temporary cheap hack was used.)
Basically, I'm just getting this out there for evaluation.
One minor errata is that I switched icarus to using “memory/battery” to
indicate battery-backed RAM, whereas genius still uses “memory/volatile”
to indicate non-battery-backed RAM.
I intend to make it “memory/battery” in genius, and have the field
auto-enable when RAM or RTC is selected for type (obviously allowing it
to be unchecked for volatile memory.)
I need to update all 64 production boards, and 25 of 29 generic boards,
to use the new slot syntax; and I also need to update every single core
in higan to use the new manifest game syntax. I want to build out a
generic manifest game parser that all emulation cores will use.
Once I finish this, I'll also need to write a database converter to
update all of my licensed game dumps to the new database syntax.
I also need to write up something for doc.byuu.org explaining the new
manifest game syntax. The manifest board syntax will still be “internal”
and subject to revisions, but once v107 is out, the gamepak manifest
format will be set in stone sans extensions.
byuu says:
Changelog:
- Game Boy: fixed RAM/RTC saving¹
- Super Famicom: ICD2 renamed to ICD (there exists an SGB prototype
with a functionally identical ICD1)
- Sufami Turbo: removed short-circuiting when loading an unlinkable
cartridge into slot A²
- Super Game Boy: the 20971520hz clock of the SGB2 is now emulated
- Super Famicom: BSC-1Lxx (SA1) boards now prompt for BS memory
cartridges; and can make use of them³
- Super Famicom: fixed a potential for out-of-bounds reads with BS
Memory flash carts
¹: I'm using a gross hack of replacing `type: ` with `type:` so that
`memory(type=...)` will match without the extra spaces. I need to
think about whether I want the BPath query syntax to strip whitespace or
not. But longer term, I want to finalize game/memory's design, and build
a higan/emulation/manifest parser that produces a nicer interface to
reading manifests for all cores, which will make this irrelevant for
higan anyway.
²: I don't think it's appropriate for higan to enforce this. Nothing
stops you from inserting games that can't be linked into a real Sufami
Turbo. I do short-circuit if you cancel the first load, but I may allow
loading an empty slot A with a populated slot B. I think the BIOS does
something when you do that. Probably just yells at you.
³: I know it's emulated correctly now, but I still don't know what
the heck changes when you load the SD Gundam G Next - Unit & Map
Collection BS Memory cartridge with SD Gundam G Next to actually test
it.
byuu says:
Changelog:
- Super Game Boy: for the 50th time, higan won't segfault if you
cancel the Game Boy cartridge load request
- icarus: moved to new manifest syntax for all remaining systems
- Game Boy: moved to new manifest syntax
Errata:
- Game Boy: save RAM does not appear to be working for some reason
- Famicom: higan won't even start to run this system; it just acts
like a cartridge was never loaded ...
- cores outside of the Super Famicom and Game Boy/Color will not run
due to icarus/higan manifest syntax differences
byuu says:
Changelog:
- Super Famicom: added remaining generic board types
- icarus: improved Super Famicom heuristics
- icarus: reworked BS Memory heuristics
- icarus: reworked Sufami Turbo heuristics
Notes: this is really complicated, and is going to take a long time to
work 100% smoothly again.
Starting off, I am trying to get rid of the weird edge case zero-byte
SRAM mapping for the Cx4. It has the RAM region present, but returns
logic low (0x00) instead of open bus, when SRAM isn't present. I started
by making it `map=ram` instead of `ram/map`, which is gross, and then it ended
up detecing the map tag ending in RAM and pulling the Cx4 data RAM into that
slot. Ugh. The preservation board mapping is still as it was before and will
need to be updated once I get the syntax down.
The BS Memory and Sufami Turbo moving to the new `game/memory`
ending means I can't use the SuperFamicom::Cartridge::loadMemory
function that looks at the old-style rom/ram tags. Because I didn't
write more code, the result is those sub-carts won't load now.
The old heuristics were short-circuiting on SA1 before bothering with
BS-X slots, so that's why SD Gundam G-Next wasn't asking for a data
pack. The problem is, I don't know where the BS-X pack maps to on this
cartridge. It's at c0-ef on the other BS-X slotted cartridges, but
that's mapped to the SA1 on regular SA1 cartridges, so ... for now, it's
not actually mapped in.
I'm still struggling with naming conventions on all these boards. I'll
make a public post about that, though.
byuu says:
Changelog:
- nall: `Markup::Node::operator[]` now uses `find()` instead of `lookup()`
behind the scenes
- Super Famicom: RAM memory ordering is now independent of ROM memory
ordering
- Super Famicom: added 19 new generic board definitions
- icarus: improved Super Famicom heuristics generation
Not putting it in the changelog, but the SPC7110 RAM now has write
protection disabled again.
99% of games should now be playable with heuristics. The exceptions
should be:
- 4MB LoROM games with SRAM (Ys 3, FE: Thracia 776)
- 2MB DSP LoROM games
- BS-X Town
- BS-X slotted games
- SA1 BSX slotted games
- SPC7110 games without the RTC (Momotarou Dentetsu Happy, Super Power
League 4)
- SPC7110 7MB fan translation (wasn't supported earlier either)
- ExLoROM games (wasn't supported earlier either)
- Sufami Turbo
- Campus Challenge '92 and Powerfest '94
- ST010 is going to run at 15MHz instead of 11MHz
- MSU1 (needs to be supported in higan, not icarus)
I'll add support for most of these before the release of v107.
byuu says:
Changelog:
- Super Famicom: update to newer board markup syntax
- Super Famicom: update all mapped ROMs to be write-protected
- errata: SPC7110 set ram.writeProtect(true), I'll fix it in the
next WIP
- icarus: rewrote the Super Famicom heuristics module from scratch
Instead of icarus heuristics generating higan-specific mappings, it now
generates generic board IDs that can be used by any emulator. I had
originally planned to print out real PCB ID codes here, but these board
mappings are meant to be more generic, and I don't want them to look
real. The pseudo-codes are easy to parse, for example: `DSP-LOROM-NVRAM`
for Super Mario Kart, `SUPERFX-RAM` for Doom.
I'm going to make a `Boards (Generic).bml` file that will contain mapping
definitions for every board. Until this is done, any games not in the SNES
preservation database will fail to play because the mapping information is
now missing.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
Loading and unloading the RTC is a little odd, since it's normally
always powered in the first place. What we want, and what the load()
functions really do, is to resync using the saved timestamps or
reset it. unload() proper doesn't do anything.
However, an interface refactoring after v098 reordered the above
operations, and this (along with a typo, shh!) was causing the already
synced time to be cleared.
I've added checks so that whenever rtc.ram can't be found, load() gets
called with empty arguments to initialise the defaults (like putting
in a fresh battery).
byuu says:
Changelog:
- processor/upd96050: always potentially update S1 on ALU ops, sans NOP
- theory by Lord Nightmare. I'm impartial on this one, but may as
well match his design
- sfc: fixed save state hang [reported by FitzRoy; fixed by Cydrak]
- icarus: do not save settings.bml file when in library mode
byuu says:
Changelog:
- processor/huc6280,mos6502,wdc65816: replaced abbreviated opcode
names with descriptive names
- nall: replaced `PLATFORM_MACOSX` define with `PLATFORM_MACOS`
- icarus: added `Icarus::missing() -> string_vector` to list missing
appended firmware files by name
- ruby, hiro: fix macosx→macos references
The processor instruction renaming was really about consistency with the
other processor cores. I may still need to do this for one or two more
processors.
The icarus change should allow a future release of the icarus
application to import games with external SNES coprocessor firmware once
again. It will also allow this to be possible when used in library mode.
byuu says:
Changelog:
- Emulator::Interface::videoResolution() -\> VideoResolution renamed
to videoInformation() -\> VideoInformation
- added double VideoInformation::refreshRate
- higan: added `binary := (application|library)` — set this to
`library` to produce a dynamic link library
- higan: removed `-march=native` for macOS application builds; and for
all library builds
- higan: removed `console` build flag; uncomment `link += -mwindows`
instead
- nall/GNUmakefile: `macosx` platform renamed `macos`
- still need to do this for nall/intrinsics.hpp
- Game Gear: return region=NTSC as the only option, so that the system
frequency is always set correctly
- hiro/cocoa: fixed typo [Sintendo]
- hiro/Windows: removed GetDpiForMonitor, as it's Windows 8+ only; DPI
is no longer per-monitor aware
- icarus: core Icarus class now has virtual functions for
directory::create, <file::exists>, <file::copy>, <file::write>
- icarus: Sufami Turbo can import save RAM files now
- icarus: setting `ICARUS_LIBRARY` define will compile icarus without
main(), GUI components
- ruby/video/Direct3D: choose the current monitor instead of top-left
monitor for fullscreen exclusive [Cydrak]
- ruby/video/Direct3D: do not set `WS_EX_TOPMOST` on fullscreen
exclusive window [Cydrak]
- this isn't necessary for exclusive mode, and it just makes
getting out of the application more difficult
byuu says:
Changelog:
- higan: URLs updated to HTTPS
- sfc/ppu/background: use hires/interlace/mosaic-adjusted X/Y
coordinates for offset-per-tile mode
- sfc/ppu/background: hires mosaic seems to advance pixel counter on
subscreen pixels
- tomoko: added “Help→Credits” menu option (currently the page does
not exist; should before v105)
- tomoko: reduced volume slider from {0% - 500%} to {0% - 200%}.
Distortion is too intense above 200%.
- technically, I've encountered distortion at 200% as well in
Prince of Persia for the SNES
- nall/run/invoke: use program path for working directory
- allows you to choose “Library→Import ROMs” from a different
directory on the command-line
I don't know how to assign credit for the mosaic stuff. It's been a
work-in-progress with me, Cydrak, and hex_usr.
The current design should be correct, but very unpleasant. The code
desperately needs to be refactored, but my recent attempt at doing so
ended in spectacular failure.
byuu says:
Changelog:
- sfc/ppu/background: minor code cleanup and simplification
- sfc/ppu/background: $2106 MOSAIC register was implemented
incorrectly
- sfc/ppu/background: fixed mosaic effects in hires mode (temporary
fix)
- sfc/ppu/background: fixed mosaic effects in interlace mode [Cydrak]
Errata:
- sfc/ppu/background/background.cpp:48: should be
`if(!mosaic.enable) {`
Turns out there is only one mosaic size, and the other four bits are
per-BG mosaic enable. This matters a lot for hires/interlace, as
mosaicSize=0 (2x2) is not the same thing as mosaicEnable=false (1x1).
Although I've now implemented this, I really don't like how my mosaic
implementation works right now. I tried to redesign the entire system,
and completely failed. So I started over from v104r10 again and instead
went with a more evolutionary improvement for now. I'll keep trying.
Also, the combination of mosaic + offset-per-tile is still sketchy, as
is mode 6 offset-per-tile. I'll get to those in the future as well.
byuu says:
Changelog:
- emulator/random: new array function with more realistic RAM
initializations
- emulator/random: both low and high entropy register initializations
now use PCG
- gba/player: rumble will time out and disable after being left on for
500ms; fixes Pokemon Pinball issue
- ruby/input/udev: fixed rumble effects [ma\_rysia]
- sfc/system: default to low-entropy randomization of memory
The low-entropy memory randomization is modeled after one of my SHVC
2/1/3 systems. It generates striped patterns in memory, using random
inputs (biased to 0x00/0xff), and has a random chance of corrupting 1-2
bits of random values in the pool of memory (to prevent easy emulator
detection and to match observed results on hardware.)
The reasoning for using PCG on register initializations, is that I don't
believe they're going to have repeating patterns like RAM does anyway.
And register initializations are way more vital.
I want to have the new low-entropy RAM mode tested, so at least for the
next few WIPs, I've set the SNES randomization over to low-entropy.
We'll have to have a long discussion and decide whether we want official
releases to use high-entropy or low-entropy.
Also, I figured out the cause of the Prince of Persia distortion ... I
had the volume under the audio settings tab set to 200%. I didn't
realize there were SNES games that clipped so easily, given how
incredibly weak SNES audio is compared to every other sound source on my
PC. So with no entropy or low-entropy, indeed the game now sounds just
fine.
I can't actually test the udev fixes, so I guess we'll see how that goes
for Screwtape and ma\_rysia.
byuu says:
Changelog:
- higan/emulator: added new Random class with three entropy settings:
none, low, and high
- md/vdp: corrected Vcounter readout in interlace mode [MoD]
- sfc: updated core to use the new Random class; defaults to high
entropy
No entropy essentially returns 0, unless the random.bias(n) function is
called, in which case, it returns n. In this case, n is meant to be the
"logical/ideal" default value that maximizes compatibility with games.
Low entropy is a very simple entropy modeled after RAM initialization
striping patterns (eg 32 0x00s, followed by 32 0xFFs, repeating
throughout.) It doesn't "glitch" like real hardware does on rare
occasions (parts of the pattern being broken from time to time.) It also
only really returns 0 or ~0. So the entropy is indeed extremely low, and
not very useful at all for detecting bugs. Over time, we can try to
improve this, of course.
High entropy is PCG. This replaces the older, lower-entropy and more
predictable, LFSR. PCG should be more than enough for emulator
randomness, while still being quite fast.
Unfortunately, the bad news ... both no entropy and low entropy fix the
Konami logo popping sound in Prince of Persia, but all three entropy
settings still cause the distortion in-game, especially evident at the
title screen. So ... this may be a more serious bug than first
suspected.
byuu says:
Changelog:
- md/vdp: backgrounds always update priority bit output [Cydrak]
- md/vdp: vcounter.d0 becomes vcounter.d8 in interlace mode 3
- md/vdp: return field number in interlace modes from status register
- md/vdp: rework scanline/frame counting in main loop so first frame
won't clock to field 1 instead of field 0
- md/vdp: add support for shadow/highlight mode; optimize to minimal
code [Cydrak]
- md/vdp: update outputPixel() to support interlace modes
- sfc/cpu: auto joypad polling start should clear the shift registers;
fixes Nuke (PD)
- thanks to BMF54123 for this bug report
- tomoko: if an invalid video/audio/input driver is found in the
configuration file, it's reset to "None"
- prevents showing the wrong driver under advanced settings; no
longer requires possibly two reboots to fix
Note: the Mega Drive interlace mode 1 should be working fully, but I
don't know any games that use it. Interlace mode 3 (Sonic 2's two-player
mode) does not work at all yet, but this is a good start.
byuu says:
Changelog:
- gba/cpu: synchronize to the PPU, not oneself, when the CPU is
stopped
- this bug was patched in the official v104 release; but not in
the .tar.xz archive
- ms/vdp: backdrop color is on the second 16-entry palette, not the
first [hex\_usr]
- ms/vdp: fix background color 0 priority; fixes Alex Kidd in High
Tech World text boxes [hex\_usr]
- tomoko: choose first option when loading files via the command-line
[hex\_usr]
- icarus: lo/hi RAM addressing was backwards; M68K is big endian;
fixes save files in Sonic 3
Many thanks to hex\_usr for the Master System / Game Gear VDP fix.
That's a tricky system to get good technical information on. The fix
should be correct, but please report if you spot any regressions just in
case.
byuu says:
Changelog:
- gba/cpu: slight speedup to CPU::step()
- processor/arm7tdmi: fixed about ten bugs, ST018 and GBA games are
now playable once again
- processor/arm: removed core from codebase
- processor/v30mz: code cleanup (renamed functions; updated
instruction() for consistency with other cores)
It turns out on my much faster system, the new ARM7TDMI core is very
slightly slower than the old one (by about 2% or so FPS.) But the
CPU::step() improvement basically made it a wash.
So yeah, I'm in really serious trouble with how slow my GBA core is now.
Sigh.
As for higan/processor ... this concludes the first phase of major
cleanups and rewrites.
There will always be work to do, and I have two more phases in mind.
One is that a lot of the instruction disassemblers are very old. One
even uses sprintf still. I'd like to modernize them all. Also, the
ARM7TDMI core (and the ARM core before it) can't really disassemble
because the PC address used for instruction execution is not known prior
to calling instruction(), due to pipeline reload fetches that may occur
inside of said function. I had a nasty hack for debugging the new core,
but I'd like to come up with a clean way to allow tracing the new
ARM7TDMI core.
Another is that I'd still like to rename a lot of instruction function
names in various cores to be more descriptive. I really liked how the
LR35902 core came out there, and would like to get that level of detail
in with the other cores as well.
byuu says:
Changelog:
- processor/arm7tdmi: completed implemented
- gba/cpu, sfc/coprocessor/armdsp: use arm7tdmi instead of arm
- sfc/cpu: experimental fix for newly discovered HDMA emulation issue
Notes:
The ARM7TDMI core crashes pretty quickly when trying to run GBA games,
and I'm certain the same will be the case with the ST018. It was never
all that likely I could rewrite 70KiB of code in 20 hours and have it
work perfectly on the first try. So, now it's time for lots and lots of
debugging. Any help would *really* be appreciated, if anyone were up for
comparing the two implementations for regressions =^-^= I often have a
really hard time spotting simple typos that I make.
Also, the SNES HDMA fix is temporary. I would like it if testers could
run through a bunch of games that are known for being tricky with HDMA
(or if these aren't known to said tester, any games are fine then.) If
we can confirm regressions, then we'll know the fix is either incorrect
or incomplete. But if we don't find any, then it's a good sign that
we're on the right path.
byuu says:
Changelog:
- hiro/windows: set dpiAware=false, fixes icarus window sizes relative
to higan window sizes
- higan, icarus, hiro, ruby: add support for high resolution displays
on macOS [ncbncb]
- processor/lr35902-legacy: removed
- processor/arm7tdmi: new processor core started; intended to one day
be a replacement for processor/arm
It will probably take several WIPs to get the new ARM core up and
running. It's the last processor rewrite. After this, all processor
cores will be up to date with all my current programming conventions.
byuu says:
Changelog:
- gb/interface: fix Game Boy Color extension to be "gbc" and not "gb"
[hex\_usr]
- ms/interface: move Master System hardware controls below controller
ports
- sfc/ppu: improve latching behavior of BGnHOFS registers (not
hardware verified) [AWJ]
- tomoko/input: rework port/device mapping to support non-sequential
ports and devices¹
- todo: should add move() to inputDevice.mappings.append and
inputPort.devices.append
- note: there's a weird GCC 4.9 bug with brace initialization of
InputEmulator; have to assign each field separately
- tomoko: all windows sans the main presentation window can be
dismissed with the escape key
- icarus: the single file selection dialog ("Load ROM Image...") can
be dismissed with the escape key
- tomoko: do not pause emulation when FocusLoss/Pause is set during
exclusive fullscreen mode
- hiro/(windows,gtk,qt): implemented Window::setDismissable() function
(missing from cocoa port, sorry)
- nall/string: fixed printing of largest possible negative numbers (eg
`INT_MIN`) [Sintendo]
- only took eight months! :D
¹: When I tried to move the Master System hardware port below the
controller ports, I ran into a world of pain.
The input settings list expects every item in the
`InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be
populated with valid results. But these would be sparsely populated
based on the port and device IDs from inside higan. And that is done so
that the Interface::inputPoll can have O(1) lookup of ports and devices.
This worked because all the port and device IDs were sequential (they
left no gaps in the maps upon creating the lists.)
Unfortunately by changing the expectation of port ID to how it appears
in the list, inputs would not poll correctly. By leaving them alone and
just moving Hardware to the third position, the Game Gear would be
missing port IDs of 0 and 1 (the controller ports of the Master System).
Even by trying to make separate MasterSystemHardware and
GameGearHardware ports, things still fractured when the devices were no
longer contigious.
I got pretty sick of this and just decided to give up on O(1)
port/device lookup, and moved to O(n) lookup. It only knocked the
framerate down by maybe one frame per second, enough to be in the margin
of error. Inputs aren't polled *that* often for loops that usually
terminate after 1-2 cycles to be too detrimental to performance.
So the new input system now allows non-sequential port and device IDs.
Remember that I killed input IDs a while back. There's never any reason
for those to need IDs ... it was easier to just order the inputs in the
order you want to see them in the user interface. So the input lookup is
still O(1). Only now, everything's safer and I return a
maybe<InputMapping&>, and won't crash out the program trying to use a
mapping that isn't found for some reason.
Errata: the escape key isn't working on the browser/message dialogs on
Windows, because of course nothing can ever just be easy and work for
me. If anyone else wouldn't mind looking into that, I'd greatly
appreciate it.
Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it
seems to not respond to the escape key on modal dialogs. If I put the
`WM_KEYDOWN` test in the main window proc, then it doesn't seem to get
called for `VK_ESCAPE` at all, and doesn't get called period for modal
windows. So I'm at a loss and it's past 4AM here >_>
byuu says:
Changelog:
- tomoko: video scaling options are now resolutions in the
configuration file, eg "640x480", "960x720", "1280x960"
- tomoko: main window is now always resizable instead of fixed width
(also supports maximizing)
- tomoko: added support for non-integral scaling in windowed mode
- tomoko: made the quick/managed state messaging more consistent
- tomoko: hide "Find Codes ..." button from the cheat editor window if
the cheat database is not present
- tomoko: per-game cheats.bml file now goes into the higan/ subfolder
instead of the root folder
So the way the new video system works is you have the following options
on the video settings panel:
Windowed mode: { Aspect correction, Integral scaling, Adaptive }
Fullscreen mode: { Aspect correction, Integral scaling } (and one day,
hopefully Exclusive will be added here)
Whenever you adjust the overscan masking, or you change any of the
windowed or fullscreen mode settings, or you choose a different video
scale from the main menu, or you load a new game, or you unload a game,
or you rotate the display of an emulated system, the resizeViewport
logic will be invoked. This logic will remember the last option you
chose for video scale, and base the new window size on that value as an
upper limit of the new window size.
If you are in windowed mode and have adaptive enabled, it will shrink
the window to fit the contents of the emulated system's video output.
Otherwise, if you are not in integral scaling mode, it will scale the
video as large as possible to fit into the video scaled size you have
selected. Otherwise, it will perform an integral scale and center the
video inside of the viewport.
If you are in fullscreen mode, it's much the same, only there is no
adaptive mode.
A major problem with Xorg is that it's basically impossible to change
the resizability attribute of a window post-creation. You can do it, but
all kinds of crazy issues start popping up. Like if you toggle
fullscreen, then you'll find that the window won't grow past a certain
fairly small size that it's already at, and cannot be shrunk. And the
multipliers will stop expanding the window as large as they should. And
sometimes the UI elements won't be placed in the correct position, or
the video will draw over them. It's a big mess. So I have to keep the
main window always resizable. Also, note that this is not a limitation
of hiro. It's just totally broken in Xorg itself. No amount of fiddling
has ever allowed this to work reliably for me on either GTK+ 2 or Qt 4.
So what this means is ... the adaptive mode window is also resizable.
What happens here is, whenever you drag the corners of the main window
to resize it, or toggle the maximize window button, higan will bypass
the video scale resizing code and instead act as though the adaptive
scaling mode were disabled. So if integral scaling is checked, it'll
begin scaling in integral mode. Otherwise, it'll begin scaling in
non-integral mode.
And because of this flexibility, it no longer made sense for the video
scale menu to be a radio box. I know, it sucks to not see what the
active selection is anymore, but ... say you set the scale to small,
then you accidentally resized the window a little, but want it snapped
back to the proper small resolution dimensions. If it were a radio item,
you couldn't reselect the same option again, because it's already active
and events don't propagate in said case. By turning them into regular
menu options, the video scale menu can be used to restore window sizing.
Errata:
On Windows, the main window blinks a few times on first load. The fix
for that is a safeguard in the video settings code, roughly like so ...
but note you'd need to make a few other changes for this to work against
v103r10:
auto VideoSettings::updateViewport(bool firstRun) -> void {
settings["Video/Overscan/Horizontal"].setValue(horizontalMaskSlider.position());
settings["Video/Overscan/Vertical"].setValue(verticalMaskSlider.position());
settings["Video/Windowed/AspectCorrection"].setValue(windowedModeAspectCorrection.checked());
settings["Video/Windowed/IntegralScaling"].setValue(windowedModeIntegralScaling.checked());
settings["Video/Windowed/AdaptiveSizing"].setValue(windowedModeAdaptiveSizing.checked());
settings["Video/Fullscreen/AspectCorrection"].setValue(fullscreenModeAspectCorrection.checked());
settings["Video/Fullscreen/IntegralScaling"].setValue(fullscreenModeIntegralScaling.checked());
horizontalMaskValue.setText({horizontalMaskSlider.position()});
verticalMaskValue.setText({verticalMaskSlider.position()});
if(!firstRun) presentation->resizeViewport();
}
That'll get it down to one blink, as with v103 official. Not sure I can
eliminate that one extra blink.
I forgot to remove the setResizable toggle on fullscreen mode exit. On
Windows, the main window will end up unresizable after toggling
fullscreen. I missed that one because like I said, toggling resizability
is totally broken on Xorg. You can fix that with the below change:
auto Presentation::toggleFullScreen() -> void {
if(!fullScreen()) {
menuBar.setVisible(false);
statusBar.setVisible(false);
//setResizable(true);
setFullScreen(true);
if(!input->acquired()) input->acquire();
} else {
if(input->acquired()) input->release();
setFullScreen(false);
//setResizable(false);
menuBar.setVisible(true);
statusBar.setVisible(settings["UserInterface/ShowStatusBar"].boolean());
}
resizeViewport();
}
Windows is stealing focus on calls to resizeViewport(), so we need to
deal with that somehow ...
I'm not really concerned about the behavior of shrinking the viewport
below the smallest multiplier for a given system. It might make sense to
snap it to the window size and forego all other scaling, but honestly
... meh. I don't really care. Nobody sane is going to play like that.
byuu says:
Changelog:
- gba/apu: fixed wave RAM nibble ordering (fixes audio in Castlevania,
PocketNES)
- emulator: restructured video information to just a single
videoResolution() → VideoResolution function
- returns "projected size" (between 160x144 and 320x240)
- "internal buffer size" (up to 1280x480)
- returns aspect correction multiplier that is to be applied to
the width field
- the value could be < 1.0 to handle systems with taller
pixels; although higan doesn't emulate such a system
- tomoko: all calculations for scaling and overscan masking are done
by the GUI now
- tomoko: aspect correction can be enabled in either windowed or
fullscreen mode separately; moved to Video settings panel
- tomoko: video scaling multipliers (against 320x240) can now me
modified from the default (2,3,4) via the configuration file
- use this as a really barebones way of supporting high DPI
monitors; although the GUI elements won't scale nicely
- if you set a value less than two, or greater than your
resolution divided by 320x240, it's your own fault when things
blow up. I'm not babysitting anyone with advanced config-file
only options.
- tomoko: added new adaptive windowed mode
- when enabled, the window will shrink to eliminate any black
borders when loading a game or changing video settings. The
window will not reposition itself.
- tomoko: added new adaptive fullscreen mode
- when enabled, the integral scaling will be disabled for
fullscreen mode, forcing the video to fill at least one
direction of the video monitor completely.
I expect we will be bikeshedding for the next month on how to describe
the new video options, where they should appear in the GUI, changes
people want, etc ... but suffice to say, I'm happy with the
functionality, so I don't intend to make changes to -what- things do,
but I will entertain better ways to name things.
byuu says:
Changelog:
- emulator: improved aspect correction accuracy by using
floating-point calculations
- emulator: added videoCrop() function, extended videoSize() to take
cropping parameters¹
- tomoko: the overscan masking function will now actually resize the
viewport²
- gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs
when the CPU is stopped
- md/vdp: center video when overscan is disabled
- pce/vce: resize video output from 1140x240 to 1120x240
- tomoko: resize window scaling from 326x240 to 320x240
- tomoko: changed save slot naming and status bar messages to indicate
quick states vs managed states
- tomoko: added increment/decrement quick state hotkeys
- tomoko: save/load quick state hotkeys now save to slots 1-5 instead
of always to 0
- tomoko: increased overscan range from 0-16 to 0-24 (in case you want
to mask the Master System to 240x192)
¹: the idea here was to decouple raw pixels from overscan masking.
Overscan was actually horrifically broken before. The Famicom outputs at
256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480.
Before, a horizontal overscan mask of 8 would not reduce the Super
Famicom or Mega Drive by nearly as much as the Famicom. WIth the new
videoCrop() function, the internals of pixel size distortions can be
handled by each individual core.
²: furthermore, by taking optional cropping information in
videoSize(), games can scale even larger into the viewport window. So
for example, before the Super Famicom could only scale to 1536x1440. But
by cropping the vertical resolution by 6 (228p effectively, still more
than NTSC can even show), I can now scale to 1792x1596. And wiht aspect
correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me
perfectly crisp pixels without linear interpolation being required.
Errata: for some reason, when I save a new managed state with the SFC
core, the default description is being set to a string of what looks to
be hex numbers. I found the cause ... I'll fix this in the next release.
Note: I'd also like to hide the "find codes..." button if cheats.bml
isn't present, as well as update the SMP TEST register comment from
smp/timing.cpp
byuu says:
Changelog:
- processor/spc700: restored fetch/load/store/pull/push shorthand
functions
- processor/spc700: split functions that tested the algorithm used (`op
!= &SPC700:...`) to separate instructions
- mostly for code clarity over code size: it was awkward having
cycle counts change based on a function parameter
- processor/spc700: implemented Overload's new findings on which
cycles are truly internal (no bus reads)
- sfc/smp: TEST register emulation has been vastly improved¹
¹: it turns out that TEST.d4,d5 is the external clock divider (used
when accessing RAM through the DSP), and TEST.d6,d7 is the internal
clock divider (used when accessing IPLROM, IO registers, or during idle
cycles.)
The DSP (24576khz) feeds its clock / 12 through to the SMP (2048khz).
The clock divider setting further divides the clock by 2, 4, 8, or 16.
Since 8 and 16 are not cleanly divislbe by 12, the SMP cycle count
glitches out and seems to take 10 and 2 clocks instead of 8 or 16. This
can on real hardware either cause the SMP to run very slowly, or more
likely, crash the SMP completely until reset.
What's even stranger is the timers aren't affected by this. They still
clock by 2, 4, 8, or 16.
Note that technically I could divide my own clock counters by 24 and
reduce these to {1,2,5,10} and {1,2,4,8}, I instead chose to divide by
12 to better illustrate this hardware issue and better model that the
SMP clock runs at 2048khz and not 1024khz.
Further, note that things aren't 100% perfect yet. This seems to throw
off some tests, such as blargg's `test_timer_speed`. I can't tell how
far off I am because blargg's test tragically doesn't print out fail
values. But you can see the improvements in that higan is now passing
all of Revenant's tests that were obviously completely wrong before.
byuu says:
Changelog:
- fc/controller: added ControllerPort class; removed Peripherals class
- md/controller/gamepad: removed X,Y,Z buttons since this isn't a
6-button controller
- ms/controller: added ControllerPort class (not used in Game Gear
mode); removed Peripherals class
- pce/controller: added ControllerPort class; removed Peripherals
class
- processor/spc700: idle(address) is part of SMP class again, contains
flag to detect mov (x)+ edge case
- sfc/controller/super-scope,justifier: use CPU frequency instead of
hard-coding NTSC frequency
- sfc/cpu: move 4x8-bit SMP ports to SMP class
- sfc/smp: move APU RAM to DSP class
- sfc/smp: improved emulation of TEST registers bits 4-7 [information
from nocash]
- d4,d5 is RAM wait states (1,2,5,10)
- d6,d7 is ROM/IO wait states (1,2,5,10)
- sfc/smp: code cleanup to new style (order from lowest to highest
bits; use .bit(s) functions)
- sfc/smp: $00f8,$00f9 are P4/P5 auxiliary ports; named the registers
better
byuu says:
Changelog:
- fc/apu: $4003,$4007 writes initialize duty counter to 0 instead of 7
- fc/apu: corrected duty table entries for use with decrementing duty
counter
- processor/spc700: emulated the behavior of cycle 3 of (x)+
instructions to not read I/O registers
- specifically, this prevents reads from $fd-ff from resetting the
timers, as observed on real hardware
- sfc/controller: added ControllerPort class to match Mega Drive
design
- sfc/expansion: added ExpansionPort class to match Mega Drive design
- sfc/system: removed Peripherals class
- sfc/system: changed `colorburst()` to `cpuFrequency()`; added
`apuFrequency()`
- sfc: replaced calls to `system.region == System::Region::*` with
`Region::*()`
- sfc/expansion: remove thread from scheduler when device is destroyed
- sfc/smp: `{read,write}Port` now use a separate 4x8-bit buffer instead
of underlying APU RAM [hex\_usr]
Tim Allen