mirror of https://github.com/bsnes-emu/bsnes.git
165 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
c58169945c |
Update to v106r63 release.
byuu says:
Changelog:
- gb/mbc7: rewrote the 93LCx6 EEPROM emulation
- sfc/slot/bsmemory: rewrote the flash emulation for Satellaview
cartridges
As of this release, flash-based BS Memory cartridges will be writable.
So without the bsnes patch to disable write limits, some games will lock
out after a few plays.
|
|
|
Tim Allen
|
c2d0ed4ca8 |
Update to v106r62 release.
byuu says:
Changelog:
- sfc/cx4: added missing instructions [info from Overload]
- sfc/cx4: added instruction cache emulation [info from ikari]
- sfc/sa1: don't let CPU access SA1-only I/O registers, and vice versa
- sfc/sa1: fixed IRQs that were broken from the recent WIP
- sfc/sa1: significantly improved bus conflict emulation
- all tests match hardware now, other than HDMA ROM↔ROM, which
is 0.5 - 0.8% too fast
- sfc/cpu: fixed a bug with DMA→CPU alignment timing
- sfc/cpu: removed the DMA pipe; performs writes on the same cycles as
reads [info from nocash]
- sfc/memory: fix a crashing bug due to not clearing Memory size field
[hex_usr]
- bsnes/gb: use .rtc for real-time clock file extensions on the Game
Boy [hex_usr]
- ruby/cgl: compilation fix [Sintendo]
Now let's see if I can accept being off by ~0.65% on one of twelve SA1
timing tests for the time being and prioritize much more important
things or not.
|
|
|
Tim Allen
|
3d34517f3e |
Update to v106r61 release.
byuu says: This release adds ikari's Cx4 notes to bsnes. It fixes the MMX2 intro's boss fight sequence to be frame perfect to real hardware. It's also very slightly faster than before. I've also added an option to toggle the CPU↔coprocessor cycle synchronization to the emulation settings panel, so you don't have to recompile to get the more accurate SA1 timings. I'm most likely going to default this to disabled in bsnes, and *maybe* enabled in higan out of the box. StaticRAM (wasn't used) and MappedRAM are gone from the Super Famicom core. Instead, there's now ReadableMemory, WritableMemory, and ProtectedMemory (WritableMemory with a toggle for write protection.) Cartridge::loadMap now takes a template Memory object, which bypasses an extra virtual function call on memory accesses, but it doesn't really impact speed much. Whatever. |
|
|
Tim Allen
|
a3e0f6da25 |
Update to v106r60 release.
byuu says: I added (imperfect) memory conflict timing to the SA1. Before: - WRAM↔↔ROM ran 7% too fast - ROM↔↔ROM ran 100% too fast - WRAM↔↔IRAM ran 7% too fast - ROM↔↔IRAM ran 7% too fast - IRAM↔↔IRAM ran 287% too fast - BWRAM↔↔BWRAM ran 100% too fast - HDMA ROM↔↔ROM ran 15% too fast - HDMA WRAM↔↔ROM ran 15% too fast - DMA ROM↔↔ROM ran 100% too fast After: - ROM↔↔ROM runs 14% too fast - HDMA WRAM↔↔ROM runs 7% too fast - DMA ROM↔↔ROM runs 4% too fast If you enable this with the fast PPU + DSP, your framerate in SA1 games will drop by 51%. And even if you disable it, you'll still lose 9% speed in SA1 games, and 2% speed in non-SA1 games, because of changes needed to make this support possible. By default, I'm leaving this off. Compile with `-DACCURATE_SA1` (or uncomment the line in sfc/sfc.hpp) if you want to try it out. This'll almost certainly cause some SA1 regressions, so I guess we'll tackle those as they arise. |
|
|
Tim Allen
|
bd814f0358 |
Update to v106r59 release.
byuu says:
Changelog:
- fixed bug in Emulator::Game::Memory::operator bool()
- nall: renamed view<string> back to `string_view`
- nall:: implemented `array_view`
- Game Boy: split cartridge-specific input mappings (rumble,
accelerometer) to their own separate ports
- Game Boy: fixed MBC7 accelerometer x-axis
- icarus: Game Boy, Super Famicom, Mega Drive cores output internal
header game titles to heuristics manifests
- higan, icarus, hiro/gtk: improve viewport geometry configuration;
fixed higan crashing bug with XShm driver
- higan: connect Video::poll(),update() functionality
- hiro, ruby: several compilation / bugfixes, should get the macOS
port compiling again, hopefully [Sintendo]
- ruby/video/xshm: fix crashing bug on window resize
- a bit hacky; it's throwing BadAccess Xlib warnings, but they're
not fatal, so I am catching and ignoring them
- bsnes: removed Application::Windows::onModalChange hook that's no
longer needed [Screwtape]
|
|
|
Tim Allen
|
f9adb4d2c6 |
Update to v106r58 release.
byuu says: The main thing I worked on today was emulating the MBC7 EEPROM. And... I have many things to say about that, but not here, and not now... The missing EEPROM support is why the accelerometer was broken. Although it's not evidently clear that I'm emulating the actual values incorrectly. I'll think about it and get it fixed, though. bsnes went from ~308fps to ~328fps, and I don't even know why. Probably something somewhere in the 140KB of changes to other things made in this WIP. |
|
|
Tim Allen
|
1e4affe5f9 |
Update to 20180808 release.
byuu says: This release fixes the XAudio 2.1 and WASAPI drivers on Windows, and extends XAudio to support device selection (eg headphones, speakers, monitor, etc.) It also adds DRC to XAudio, however it's not currently working. The code is courtesy of Talarubi, I just botched it somewhere upon porting it to the newer version of ruby. |
|
|
Tim Allen
|
93a6a1ce7e |
Update to v106r57 release.
byuu says: I've added tool tips to hiro for Windows, GTK, and Qt. I'm unsure how to add them for Cocoa. I wasted am embarrassing ~14 hours implementing tool tips from scratch on Windows, because the `TOOLTIPS_CLASS` widget just absolutely refused to show up, no matter what I tried. As such, they're not quite 100% native, but I would really appreciate any patch submissions to help improve my implementation. I added tool tips to all of the confusing settings in bsnes. And of course, for those of you who don't like them, there's a configuration file setting to turn them off globally. I also improved Mega Drive handling of the Game Genie a bit, and restructured the way the Settings class works in bsnes. Starting now, I'm feature-freezing bsnes and higan. From this point forward: - polishing up and fixing bugs caused by the ruby/hiro changes - adding DRC to XAudio2, and maybe exclusive mode to WGL - correcting FEoEZ (English) to load and work again out of the box Once that's done, a final beta of bsnes will go out, I'll fix any reported bugs that I'm able to, and then v107 should be ready. This time with higan being functional, but marked as v107 beta. v108 will restore higan to production status again, alongside bsnes. |
|
|
Tim Allen
|
3b4e8b6d75 |
Update to v106r56 release.
byuu says: I fixed all outstanding bugs that I'm aware of, including all of the errata I listed yesterday. And now it's time for lots of regression testing. After that, I need to add Talarubi's XAudio2 DRC code, and then get a new public bsnes WIP out for final testing. New errata: when setting an icon (nall::image) larger than a Canvas on Windows, it's not centering the image, so you end up seeing the overscan area in the state manager previews, and the bottom of the image gets cut off. I also need to forcefully disable the Xlib screensaver disable support. I think I'll remove the GUI option to bypass it as well, and just force screensaver disable always on with Windows. I'll improve it in the future to toggle the effect between emulator pauses. |
|
|
Tim Allen
|
5da4532771 |
Update to v106r55 release.
byuu says:
Everything *should* be working again, but of course that won't
actually be the case. Here's where things stand:
- bsnes, higan, icarus, and genius compile and run fine on FreeBSD
with GTK
- ruby video and audio drivers are untested on Windows, macOS, and
Linux
- hiro is untested on macOS
- bsnes' status bar is not showing up properly with hiro/qt
- bsnes and higan's about screen is not showing up properly with
hiro/qt (1x1 window size)
- bsnes on Windows crashes often when saving states, and I'm not sure
why ... it happens inside Encode::RLE
- bsnes on Windows crashes with ruby.input.windows (unsure why)
- bsnes on Windows fails to show the verified emblem on the status bar
properly
- hiro on Windows flickers when changing tabs
To build the Windows bsnes and higan ports, use
ruby="video.gdi audio.directsound"
Compilation error logs for Linux will help me fix the inevitable list of
typos there. I can fix the typos on other platforms, I just haven't
gotten to it yet.
|
|
|
Tim Allen
|
41e127a07c |
Update to v106r54 release.
byuu says: Changes to hiro will break all but the GTK target. Not that it matters much given that the only ruby drivers that function are all on BSD anyway. But if you are fortunate enough to be able to run this ... you'll find lots of polishing improvements to the bsnes GUI. I posted some screenshots on Twitter, if anyone were interested. |
|
|
Tim Allen
|
5d135b556d |
Update to v106r53 release.
byuu says: Okay, so the WIPs-within-WIPs thing wasn't achieving its desired effect, and it ended up causing me to have to redo some work on hiro since my last local snapshot was of r52. So, heck it. I'll just do mostly non-functional WIPs for a bit, and worry about the fallout years later when I'm trying to find an emulation regression and cursing that the WIPs aren't compiling. I ported all of the ruby input drivers to the new syntax, as well as the OpenAL driver. If you patch the ruby drivers for Linux with this in mind, bsnes should compile and run there again. Also, the bsnes program icon has returned, now that the new hiro layout code is mature enough and I can simply add and remove the icon as a Canvas instead of having to try and render into a viewport. The icon shows up instantly with the main window. |
|
|
Tim Allen
|
212da0a966 |
Update to 20180730 release.
byuu says: These WIPs-within-WIPs are getting more and more broken ... this isn't going the way I wanted. But ... this time around, I've revamped the entire ruby API again, to solve a bunch of tough problems that have always made using ruby really clunky. But there are *so many* ruby drivers that it's going to take a long time to work through them all. This WIP is only going to run bsnes, and only on FreeBSD, and only with some drivers. hiro's Application::initialize() now calls hiro::initialize(), which you define inside of your hiro apps. This lets you call Application::setName(...) before anything else in hiro runs. This is essential on Xorg to set program icons, for instance. With the ruby rewrite and the change to hiro, I can get away from the need to make everything in bsnes/higan pointers to objects, and can now just declare them as regular objects. |
|
|
Tim Allen
|
5deba5cbc1 |
Update to 20180729 release.
byuu wrote: Sigh ... asio.hpp needs #include <nall/windows/registry.hpp> [Since the last WIP, byuu also posted the following message. -Ed.] ruby drivers have all been updated (but not tested outside of BSD), and I redesigned the settings window. The driver functionality all exists on a new "Drivers" panel, the emulator/hack settings go to a "Configuration" panel, and the video/audio panels lose driver settings. As does the settings menu and its synchronize options. I want to start pushing toward a v107 release. Critically, I will need DirectSound and ALSA to support dynamic rate control. I'd also like to eliminate the other system manifest.bml files. I need to update the cheat code database format, and bundle at least a few quark shaders -- although I still need to default to Direct3D on Windows. Turbo keys would be nice, if it's not too much effort. Aside from netplay, it's the last significant feature I'm missing. I think for v107, higan is going to be a bit rough around the edges compared to bsnes. And I don't think it's practical to finish the bsnes localization support. I'm thinking we probably want another WIP to iron out any critical issues, but this time there should be a feature freeze with the next WIP. |
|
|
Tim Allen
|
716c95f279 |
Update to 20180728 release.
byuu says: Sigh, I seem to be spiraling a bit here ... but the work is very important. Hopefully I can get a solid WIP together soon. But for now... I've integrated dynamic rate control into ruby::Audio via setDynamic(bool) for now. It's very demanding, as you would expect. When it's not in use, I realized the OSS driver's performance was pretty bad due to calling write() for every sample for every channel. I implemented a tiny 256-sample buffer and bsnes went from 290fps to 330fps on my FreeBSD desktop. It may be possible to do the same buffering with DRC, but for now, I'm not doing so, and adjusting the audio input frequency on every sample. I also added ruby::Video::setFlush(bool), which is available only in the OpenGL drivers, and this causes glFinish() to be called after swapping display buffers. I really couldn't think of a good name for this, "hard GPU sync" sounds kind of silly. In my view, flush is what commits queued events. Eg fflush(). OpenGL of course treats glFlush differently (I really don't even know what the point of it is even after reading the manual ...), and then has glFinish ... meh, whatever. It's setFlush(bool) until I come up with something better. Also as expected, this one's a big hit to performance. To implement the DRC, I started putting helper functions into the ruby video/audio/input core classes. And then the XVideo driver started crashing. It took hours and hours and hours to track down the problem: you have to clear XSetWindowAttributes to zero before calling XCreateWindow. No amount of `--sync`, `gdb break gdk_x_error`, `-Og`, etc will make Xlib be even remotely helpful in debugging errors like this. The GLX, GLX2, and XVideo drivers basically worked by chance before. If the stack frame had the right memory cleared, it worked. Otherwise it'd crash with BadValue, and my changing things broke that condition on the XVideo driver. So this has been fixed in all three now. Once XVideo was running again, I realized that non-power of two video sizes were completely broken for the YUV formats. It took a while, but I managed to fix all of that as well. At this point, most of ruby is going to be broken outside of FreeBSD, as I still need to finish updating all the drivers. |
|
|
Tim Allen
|
22bd4b9277 |
Update to v106r52 release.
byuu says: I stand corrected, I managed to create and even larger diff than ever. This one weighs in at 309KiB `>__>` I'll have to create a changelog later, I'm too tired right now to go through all of that. |
|
|
Tim Allen
|
35ff15f83e |
Update to v106r50 release.
byuu says:
Changelog:
- emulator/video,audio: various cleanups
- emulator/audio: removed reverb effect (it breaks very badly on
high-frequency systems)
- emulator/audio: the Nyquist anti-aliasing lowpass filter is now
generated automatically instead of set per-core
- at 44.1KHz output, it's set to 22KHz; at 48KHz, it's set to
22KHz; at 96KHz, it's set to 25KHz
- this filter now takes the bsnes emulation speed setting into
account
- all system/video.cpp files removed; inlined in System::power() and
Interface::set() instead
- sfc/cpu: pre-compute `HTIME` as `HTIME+1<<2` for faster comparisons of
HIRQs
- sfc/cpu: re-add check to block IRQs on the last dot of each frame
(minor speed hit)
- hiro/gtk3: fixed headers for Linux compilation finally
- hiro/gtk,qt: fixed settings.cpp logic so initial values are used
when no settings.bml file exists
- hiro/gtk: started a minor experiment to specify theming information
in settings.bml files
- nall/dsp: allow the precision type (double) to be overridden (to
float)
- nall: add some helpers for generating pre-compiled headers
- it was a failure to try using them for higan, however ...
- nall: add some helpers for reading fallback values from empty
`Markup::Node[search]` statements
Todo:
- CRITICAL: a lot of my IRQ/NMI/HDMA timing tests are failing with the
fast PPU ... need to figure out why
- space between Emulator::video functions and Emulator::audio
functions in gb/system/system.cpp
- remove Audio/Reverb/Enable from settings.bml in target-bsnes
|
|
|
Tim Allen
|
65a3e6c676 |
Update to v106r49 release.
byuu says:
This is a fairly radical WIP with extreme changes to lots of very
important parts.
The result is a ~7% emulation speedup (with bsnes, unsure how much it
helps higan), but it's quite possible there are regressions. As such, I
would really appreciate testing as many games as possible ... especially
the old finnicky games that had issues with DMA and/or interrupts.
One thing to note is that I removed an edge case test that suppresses
IRQs from firing on the very last dot of every field, which is a
behavior I've verified on real hardware in the past. I feel that the
main interrupt polling function (the hottest portion of the entire
emulator) is not the appropriate place for it, and I should instead
factor it into assignment of NMITIMEN/VTIME/HTIME using the new
io.irqEnable (==virqEnable||hirqEnable) flag. But since I haven't done
that yet ... there's an old IRQ test ROM of mine that'll fail for this
WIP. No commercial games will ever rely on this, so it's fine for
testing.
Changelog:
- sfc/cpu.smp: inlined the global status functions
- sfc/cpu: added readRAM, writeRAM to use a function pointer instead
of a lambda for WRAM access
- sfc/cpu,smp,ppu/counter: updated reset functionality to new style
using class inline initializers
- sfc/cpu: fixed power(false) to invoke the reset vector properly
- sfc/cpu: completely rewrote DMA handling to have per-channel
functions
- sfc/cpu: removed unused joylatch(), io.joypadStrobeLatch
- sfc/cpu: cleaned up io.cpp handlers
- sfc/cpu: simplified interrupt polling code using
nall::boolean::flip(),raise(),lower() functions
- sfc/ppu/counter: cleaned up the class significantly and also
optimized things for efficiency
- sfc/ppu/counter: emulated PAL 1368-clock long scanline when
interlace=1, field=1, vcounter=311
- sfc/smp: factored out the I/O and port handlers to io.cpp
|
|
|
Tim Allen
|
393c2395bb |
Update to v106r48 release.
byuu says:
The problems with the Windows and Qt4 ports have all been resolved,
although there's a fairly gross hack on a few Qt widgets to not destruct
once Application::quit() is called to avoid a double free crash (I'm
unsure where Qt is destructing the widgets internally.) The Cocoa port
compiles again at least, though it's bound to have endless problems. I
improved the Label painting in the GTK ports, which fixes the background
color on labels inside TabFrame widgets.
I've optimized the Makefile system even further.
I added a "redo state" command to bsnes, which is created whenever you
load the undo state. There are also hotkeys for both now, although I
don't think they're really something you want to map hotkeys to.
I moved the nall::Locale object inside hiro::Application, so that it can
be used to translate the BrowserDialog and MessageDialog window strings.
I improved the Super Game Boy emulation of `MLT_REQ`, fixing Pokemon
Yellow's custom border and probably more stuff.
Lots of other small fixes and improvements. Things are finally stable
once again after the harrowing layout redesign catastrophe.
Errata:
- ICD::joypID should be set to 3 on reset(). joypWrite() may as well
take uint1 instead of bool.
- hiro/Qt: remove pWindow::setMaximumSize() comment; found a
workaround for it
- nall/GNUmakefile: don't set object.path if it's already set (allow
overrides before including the file)
|
|
|
Tim Allen
|
6090c63958 |
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
|
|
|
Tim Allen
|
0c55796060 |
Update to v106r46 release.
byuu says:
Changelog:
- bsnes, higan: simplified make output; reordered rules
- hiro: added Window::set(Minimum,Maximum)Size() [only implemented in
GTK+ so far]
- bsnes: only allow the window to be shrunk to the 1x multiplier size
- bsnes: refactored Integral Scaling checkbox to {Center, Scale,
Stretch} radio selection
- nall: call fflush() after nall::print() to stdout or stderr [needed
for msys2/bash]
- bsnes, higan: program/interface.cpp renamed to program/platform.cpp
- bsnes: trim ".shader/" from names in Settings→Shader menu
- bsnes: Settings→Shader menu updated on video driver changes
- bsnes: remove missing games from recent files list each time it is
updated
- bsnes: video multiplier menu generated dynamically based on largest
monitor size at program startup
- bsnes: added shrink window and center window function to video
multiplier menu
- bsnes: de-minimize presentation window when exiting fullscreen mode
or changing video multiplier
- bsnes: center the load game dialog against the presentation window
(important for multi-monitor setups)
- bsnes: screenshots are not immediate instead of delayed one frame
- bsnes: added frame advance menu option and hotkey
- bsnes: added enable cheats checkbox and hotkey; can be used to
quickly enable/disable all active cheats
Errata:
- hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`,
`SW_MAXIMIZE`
- hiro/Windows: add pMonitor::workspace()
- hiro/Windows: add setMaximized(), setMinimized() in
pWindow::construct()
- bsnes: call setCentered() after setMaximized(false)
|
|
|
Tim Allen
|
372e9ef42b |
Update to v106r45 release.
byuu says:
Changelog:
- sfc/ppu-fast: added hires mode 7 option (doubles the sampling rate
of mode 7 pixels to reduce aliasing)
- sfc/ppu-fast: fixed mode 7 horizontal screen flip [hex_usr]
- bsnes: added capture screenshot function and path selection
- for now, it saves as BMP. I need a deflate implementation that
won't add an external dependency for PNG
- the output resolution is from the emulator: (256 or 512)x(240 or
480 minus overscan cropping if enabled)
- it captures the NEXT output frame, not the current one ... but
it may be wise to change this behavior
- it'd be a problem if the core were to exit and an image was
captured halfway through frame rendering
- bsnes: recovery state renamed to undo state
- bsnes: added manifest viewer tool
- bsnes: mention if game has been verified or not on the status bar
message at load time
- bsnes, nall: fixed a few missing function return values
[SuperMikeMan]
- bsnes: guard more strongly against failure to load games to avoid
crashes
- hiro, ruby: various fixes for macOS [Sintendo]
- hiro/Windows: paint on `WM_ERASEBKGND` to prevent status bar
flickering at startup
- icarus: SPC7110 heuristics fixes [hex_usr]
Errata:
- sfc/ppu-fast: remove debug hires mode7 force disable comment from
PPU::power()
[The `WM_ERASEBKGND` fix was already present in the 106r44 public
beta -Ed.]
|
|
|
Tim Allen
|
5a8c814e25 |
Update to v106r40 release.
byuu says:
Changelog:
- hiro: added BrowserDialog::openObject() [match file *or* folder
by filters]
- hiro: BrowserDialog accept button is now disabled when it would
otherwise do nothing
- eg openFile without a folder to enter or file to open selected
- eg saveFile without a file name or with a file name that matches
a folder name
- bsnes: added support for gamepaks (game folders)
- bsnes: store all save states inside per-game .bsz (ZIP) archives
instead of .bst/ folders
- this reduces the number of state files from 10+ to 1; without
having folders sort before files
- hiro: both gtk2 and gtk3 now use cairo to render Canvas; supports
sx,sy [BearOso]
- higan, bsnes: fast PPU/DSP are now run-time options instead of
compile-time options
- bsnes: disable fast PPU when loading Air Strike Patrol / Desert
Fighter
- bsnes: disable fast DSP when loading Koushien 2
- bsnes: added options to advanced panel to disable fast PPU and/or
fast DSP
|
|
|
Tim Allen
|
15b67922b3 |
Update to v106r38 release.
byuu says:
Changelog:
- hiro: added Qt5 support
- hiro: added GTK3 support (currently runs very poorly)
- bsnes: number of recent games and quick state slots can be changed
programmatically now
- I may expose this as a configuration file setting, but probably
not within the GUI
- nall: use -Wno-everything when compiling with Clang
- sorry, Clang's meaningless warning messages are just endless ...
|
|
|
Tim Allen
|
ec9729a9e1 |
Update to v106r36 release.
byuu says:
Changelog:
- nall: renamed array to adaptive_array; marked it as deprecated
- nall: created new array class; which is properly static (ala
std::array) with optional bounds-checking
- sfc/ppu-fast: converted unmanaged arrays to use nall/array (no speed
penalty)
- bsnes: rewrote the cheat code editor to a new design
- nall: string class can stringify pointer types directly now, so
pointer() was removed
- nall: added array_view and pointer types (still unsure if/how I'll
use pointer)
|
|
|
Tim Allen
|
5d29700fa1 |
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
|
|
|
Tim Allen
|
685cec6583 |
Update to v106r30 release.
byuu says:
Changelog:
- nall/GNUmakefile: fixed findstring parameter arguments [Screwtape]
- nall/Windows: always include -mthreads -lpthread for all
applications
- nall/memory: code restructuring
I really wanted to work on the new PPU today, but I thought I'd spend a
few minutes making some minor improvements to nall::memory, that was
five and a half hours ago. Now I have a 67KiB diff of changes. Sigh.
|
|
|
Tim Allen
|
2b8df2e70e |
Update to v106r27 release.
byuu says:
Changelog:
- nall: merged Path::config() and Path::local() to Path::userData()
- ~/.local/share or %appdata or ~/Library/ApplicationSupport
- higan, bsnes: render main window icon onto viewport instead of
canvas
- should hopefully fix a brief flickering glitch that appears on
Windows
- icarus: improved Super Famicom heuristics for Starfox / Starwing RAM
- ruby/Direct3D: handle viewport size changes in lock() instead of
output()
- fixes icon disappearing when resizing main window
- hiro/Windows: remove WS_DISABLED from StatusBar to fix window
resize grip
- this is experimental: I initially used WS_DISABLED to work
around a focus bug
- yet trying things now, said bug seems(?) to have gone away at
some point ...
- bsnes: added advanced settings panel with real-time driver change
support
I'd like feedback on the real-time driver change, for possible
consideration into adding this to higan as well.
Some drivers just crash, it's a fact of life. The ASIO driver in
particular likes to crash inside the driver itself, without any error
messages ever returned to try and catch.
When you try to change a driver with a game loaded, it gives you a scary
warning, asking if you want to proceed.
When you change a driver, it sets a crash flag, and if the driver
crashes while initializing, then restarting bsnes will disable the
errant driver. If it fails in a recoverable way, then it sets the driver
to “None” and warns you that the driver cannot be used.
What I'm thinking of further adding is to call emulator→save() to
write out the save RAM contents beforehand (although the periodic
auto-saving RAM will handle this anyway when it's enabled), and possibly
it might be wise to capture an emulator save state, although those can't
be taken without advancing the emulator to the next frame, so that might
not be a good idea.
I'm also thinking we should show some kind of message somewhere when a
driver is set to “None”. The status bar can be hidden, so perhaps on the
title bar? Or maybe just a warning on startup that a driver is set to
“None”.
|
|
|
Tim Allen
|
5961ea9c03 |
Update to v106r26 release.
byuu says:
Changelog:
- nall: added -static-libgcc -static-libstdc++ to Windows/GCC link
flags
- bsnes, higan: added program icons to main window when game isn't
loaded
- bsnes: improved recent games menu sorting
- bsnes: fixed multi-game recent game loading on Windows
- bsnes: completed path override support
- bsnes, higan: added screensaver suppression on Windows
- icarus: add 32K volatile RAM to SuperFX boards that report no RAM
(fixes Starfox)
- bsnes, higan: added automatic dependency generation [Talarubi]
- hiro/GTK: appending actions to menus restores enabled() state
- higan: use board node inside manifest.bml if it exists
- bsnes: added blur emulation and color emulation options to view menu
- ruby: upgraded input.sdl to SDL 2.0 (though it makes no functional
difference sadly)
- ruby: removed video.sdl (due to deprecating SDL 1.2)
- nall, ruby: improvements to HID class (generic vendor and product
IDs)
Errata:
- bsnes, higan: on Windows, Application::Windows::onScreenSaver needs
`[&]` lambda capture, not `[]`
- find it in presentation/presentation.cpp
|
|
|
Tim Allen
|
3353efd3a1 |
Update to v106r25 release.
byuu says:
Changelog:
- bsnes:
- added full input mapping support (multi-mapping, digital+analog
inputs, rumble, hotkeys, etc)
- can now load multi-part games (eg Super Game Boy) from the
command-line
- added recent games menu with list clear function; supports
multi-part games (sorting logic incomplete)
- added automatic binding of gamepads on new configuration files
- added view scaling support with aspect correction, overscan
cropping, and integral scaling modes
- added video shader support
- added status bar (can be hidden)
- added save states (both menu and hotkeys)
- added fullscreen mode support
- added support for loading compressed (ZIP) archives for any
supported media type (SNES, GB, etc)
- added frame counter
- added auto-memory saving
- added pause / block-input modes when main window loses focus
- added --fullscreen command-line option to start bsnes in
fullscreen mode
- added input settings panel
- added hotkeys settings panel
- added path settings panel (paths aren't actually used set, but
can be assigned)
- higan: fixed macOS install rule [Sintendo]
- higan: minor UI code cleanups
- nall: renamed Processor to Architecture to fix macOS builds
[Sintendo]
Yeah, you read right: recent games menu, path settings. And dynamic rate
control + screensaver suppression is on the todo list. I'm not fucking
around this time. I really want to make something special here.
|
|
|
Tim Allen
|
0ea17abfea |
Update to v106r15 release.
byuu says: Changelog: - Super Game Boy: fixed loading of boot ROM - hiro: added ComboEdit::setEditable(bool = true); - tomoko: added new systems settings panel Note!!: this release will not compile on Windows or macOS due to the missing ComboEdit control! I'll try to merge in hex's implementation for the Windows release here soon. macOS users will probably be out of luck for a while, sorry. The new systems panel is an idea I've been meaning to implement for quite a while, but finally got around to starting on it. It's still fairly unpolished, but the basic idea is there for Linux/BSD users to try out now. So imagine the Super Game Boy, BS-X Satellaview, Sufami Turbo, and the associated BS Memory Pack-slotted SNES cartridges. To play any of those, you needed to choose Nintendo→Super Famicom, and then select the relevant cartridge, and then select any slotted cartridges to play with it. This was acceptable-ish, if not ideal. But now imagine in the future if we wanted to support the Famicom Disk System, which is technically a cartridge that plugs into the Famicom deck. Or the PC Engine CD, which has one of three special HuCards that must be inserted (ignoring the Turbo Duo where it's built-in—I'm going to be emulating the Super CD as if you're using a stock PCE CD.) Or the Mega CD, where there are probably a half dozen or more BIOS + hardware revisions that are region-specific, which connect to an expansion port that is identical to the cartridge port save for the Mega Drive seeing an I/O register bit toggled here. In all of these cases, it's going to be a real pain to have to choose the 'BIOS' every time you want to play a game for them. I can't distribute these BIOSes with higan due to copyright restrictions, and trying to ship dummy folders for every possible combination would become quite odious, and difficult for people to use (compare to setting up the Game Boy Advance system BIOS.) And so I've created the new systems settings panel. Here, you can manage a list of systems that show up under the higan library menu (now renamed to “System”), where each entry contains name, boot, and hidden parameters. The name parameter is what shows up in the system menu. You can call any system higan emulates whatever you like here. Don't like “Super Famicom”? Change it to “SNES”, then. The boot parameter is a combo edit with a dropdown for all of the systems higan emulates. If you choose one of these, then the higan system menu option will work exactly like in previous releases, and prompt you for a cartridge. But if you choose the browse button next to the combo edit control, you'll get to pick any gamepak from the higan library of your choosing. So you could choose the SGB2 BIOS, and name the menu option “Super Game Boy 2”, and when you choose the menu option, it will load the SFC core, load the SGB2 BIOS, and only prompt you for the Game Boy game you wish to play on it. The same deal goes for the FDS, PCE-CD, Mega CD, Mega Drive Sonic & Knuckles lock-on cartridge, BS-X Satellaview, SD Gundam G-Next, etc. Whatever you want to be in the menu, you can put in there by pointing higan at the appropriate 'BIOS' gamepak to load. Astute readers have probably already noticed, but you can technically use this on non-slotted games as well, thus creating instant boot options for your absolute favorite games, if you so wanted. Point it at Zelda 3, and you can boot it instantly from the main menu, without any need for file selection. The hidden option is a way to hide the system entries from the system menu. Primarily this would be a fast way for users to disable emulation cores they never use in higan, without having to remove the options. The major concession with this change is the collapsing of the per-manufacturer submenus. What this means is you will now have all twelve higan emulated systems in the main menu by default. This makes the list rather long, but ... oh well. I may try to offer some form of grouping in the future, but the grouping defeats the “list order = display order” design, and I'm not willing to auto-sort the list. I want people to be able to control the ordering of the system menu, and have added (as yet non-functional) sorting arrows for that purpose. I also don't have a combined tree+table view widget in higan to try to and group things. But ... we'll see how things go in the future. Another idea is to add a specialty load option that opens up the user's Emulation library path, and lets you pick a gamepak for any system, which would boot the same way as when you drop a gamepak onto the higan executable or main window. So say you almost never play Wonderswan games, this would be a way to play them without them cluttering your system menu list. The “import ROM files” option has been removed. All it does is launch icarus directly. I would rather users become familiar with using icarus. The “load ROM file” option remains. Anyway, this is all still a work in progress, so please give it time and don't overload me with too many suggested changes right now, thanks :3 |
|
|
Tim Allen
|
8f61c267c5 |
Update to v106r14 release.
byuu says:
Changelog:
- game/memory/type/battery → game/memory/volatile
- (manufacturer.)content.type → (architecture.)content.type
- nall: Markup::find() strips spaces from values in comparisons
- higan: updated game manifest loading/saving code for all cores
- GBA: flash memory ID is internally selected based on the
manufacturer and memory size
- SFC: ST018 (ARM6) frequency can be modified via game manifest now
- WS: EEPROM::name removed (not useful)
- icarus, genius: battery→volatile updates
I did my best to look over the diff between r13 and r14, but it's 84KiB
excluding the game database changes. It's just too much for me. I'd
greatly appreciate if someone could look over it and check for any
errors in this update. But more than likely, I suppose we'll iron out
any issues by determining which games fail to load.
Right now, I know the Super Game Boy support doesn't seem to work. But
all non-SFC cores should work fully, and all normal + NEC DSP SFC games
should work as well. Unsure about the rest.
Also, I'm planning to change the Game Boy “MBC1M” mapper to “MBC1#A” to
indicate it's an alternate wiring configuration of the stock MBC1, and
not a new mapper type.
|
|
|
Tim Allen
|
c38a771f22 |
Update to v106r04 release.
byuu says:
Changelog:
- nall: `Markup::Node::operator[]` now uses `find()` instead of `lookup()`
behind the scenes
- Super Famicom: RAM memory ordering is now independent of ROM memory
ordering
- Super Famicom: added 19 new generic board definitions
- icarus: improved Super Famicom heuristics generation
Not putting it in the changelog, but the SPC7110 RAM now has write
protection disabled again.
99% of games should now be playable with heuristics. The exceptions
should be:
- 4MB LoROM games with SRAM (Ys 3, FE: Thracia 776)
- 2MB DSP LoROM games
- BS-X Town
- BS-X slotted games
- SA1 BSX slotted games
- SPC7110 games without the RTC (Momotarou Dentetsu Happy, Super Power
League 4)
- SPC7110 7MB fan translation (wasn't supported earlier either)
- ExLoROM games (wasn't supported earlier either)
- Sufami Turbo
- Campus Challenge '92 and Powerfest '94
- ST010 is going to run at 15MHz instead of 11MHz
- MSU1 (needs to be supported in higan, not icarus)
I'll add support for most of these before the release of v107.
|
|
|
Tim Allen
|
2f81b5a3e7 |
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
|
|
|
Tim Allen
|
e9d2d56df9 |
Update to v105r1 release.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
|
|
|
Tim Allen
|
6524a7181d |
Update to v104r15 release.
byuu says:
Changelog:
- processor/huc6280,mos6502,wdc65816: replaced abbreviated opcode
names with descriptive names
- nall: replaced `PLATFORM_MACOSX` define with `PLATFORM_MACOS`
- icarus: added `Icarus::missing() -> string_vector` to list missing
appended firmware files by name
- ruby, hiro: fix macosx→macos references
The processor instruction renaming was really about consistency with the
other processor cores. I may still need to do this for one or two more
processors.
The icarus change should allow a future release of the icarus
application to import games with external SNES coprocessor firmware once
again. It will also allow this to be possible when used in library mode.
|
|
|
Tim Allen
|
fbc58c70ae |
Update to v104r14 release.
byuu says:
Changelog:
- Emulator::Interface::videoResolution() -\> VideoResolution renamed
to videoInformation() -\> VideoInformation
- added double VideoInformation::refreshRate
- higan: added `binary := (application|library)` — set this to
`library` to produce a dynamic link library
- higan: removed `-march=native` for macOS application builds; and for
all library builds
- higan: removed `console` build flag; uncomment `link += -mwindows`
instead
- nall/GNUmakefile: `macosx` platform renamed `macos`
- still need to do this for nall/intrinsics.hpp
- Game Gear: return region=NTSC as the only option, so that the system
frequency is always set correctly
- hiro/cocoa: fixed typo [Sintendo]
- hiro/Windows: removed GetDpiForMonitor, as it's Windows 8+ only; DPI
is no longer per-monitor aware
- icarus: core Icarus class now has virtual functions for
directory::create, <file::exists>, <file::copy>, <file::write>
- icarus: Sufami Turbo can import save RAM files now
- icarus: setting `ICARUS_LIBRARY` define will compile icarus without
main(), GUI components
- ruby/video/Direct3D: choose the current monitor instead of top-left
monitor for fullscreen exclusive [Cydrak]
- ruby/video/Direct3D: do not set `WS_EX_TOPMOST` on fullscreen
exclusive window [Cydrak]
- this isn't necessary for exclusive mode, and it just makes
getting out of the application more difficult
|
|
|
Tim Allen
|
1ff315838e |
Update to v104r13 release.
byuu says:
Changelog:
- nall/GNUmakefile: build=release changed to -O2, build=optimize is
now -O3
- hiro: added Monitor::dpi(uint index) → Position [returns logical
DPI for x, y]
- Position is a bad name, but dpi(monitor).(x,y)() make more sense
than .(width,height)()
- hiro: Position, Size, Geometry, Font changed from using signed int
to float
- hiro: Alignment changed from using double to float
- hiro: added skeleton (unused) Application::scale(), setScale()
functions
Errata:
- hiro/cocoa's Monitor::dpi() is untested. Probably will cause issues
with macOS' automatic scaling.
- hiro/gtk lacks a way to get both per-monitor and per-axis (x,y) DPI
scaling
- hiro/qt lacks a way to get per-monitor DPI scaling (Qt 5.x has this,
but I still use Qt 4.x)
- and just to get global DPI, hiro/qt's DPI retrieval has to use
undocumented functions ... fun
The goal with this WIP was basically to prepare hiro for potential
automatic scaling. It'll be extremely difficult, but I'm convinced that
it must be possible if macOS can do it.
By moving from signed integers to floats for coordinates, we can now
scale and unscale without losing precision. That of course isn't the
hard part, though. The hard part is where and how to do the scaling. In
the ideal application, hiro/core and hiro/extension will handle 100% of
this, and the per-platform hiro/(cocoa,gtk,qt,windows) will not be aware
of what's going on, but ... to even make that possible, things will need
to change in every per-platform core, eg the per-platform code will have
to call a core function to change geometry, which will know about the
scaling and unscale the values back down again.
Gonna be a lot of work, but ... it's a start.
|
|
|
Tim Allen
|
4fb8ce2821 |
Update to v104r12 release.
byuu says:
Changelog:
- higan: URLs updated to HTTPS
- sfc/ppu/background: use hires/interlace/mosaic-adjusted X/Y
coordinates for offset-per-tile mode
- sfc/ppu/background: hires mosaic seems to advance pixel counter on
subscreen pixels
- tomoko: added “Help→Credits” menu option (currently the page does
not exist; should before v105)
- tomoko: reduced volume slider from {0% - 500%} to {0% - 200%}.
Distortion is too intense above 200%.
- technically, I've encountered distortion at 200% as well in
Prince of Persia for the SNES
- nall/run/invoke: use program path for working directory
- allows you to choose “Library→Import ROMs” from a different
directory on the command-line
I don't know how to assign credit for the mosaic stuff. It's been a
work-in-progress with me, Cydrak, and hex_usr.
The current design should be correct, but very unpleasant. The code
desperately needs to be refactored, but my recent attempt at doing so
ended in spectacular failure.
|
|
|
Tim Allen
|
366e9cebff |
Update to v104r01 release.
byuu says:
Changelog:
- gba/cpu: synchronize to the PPU, not oneself, when the CPU is
stopped
- this bug was patched in the official v104 release; but not in
the .tar.xz archive
- ms/vdp: backdrop color is on the second 16-entry palette, not the
first [hex\_usr]
- ms/vdp: fix background color 0 priority; fixes Alex Kidd in High
Tech World text boxes [hex\_usr]
- tomoko: choose first option when loading files via the command-line
[hex\_usr]
- icarus: lo/hi RAM addressing was backwards; M68K is big endian;
fixes save files in Sonic 3
Many thanks to hex\_usr for the Master System / Game Gear VDP fix.
That's a tricky system to get good technical information on. The fix
should be correct, but please report if you spot any regressions just in
case.
|
|
|
Tim Allen
|
7022d1aa51 |
Update to v103r23 release.
byuu says:
Changelog:
- gb: added accelerometer X-axis, Y-Axis inputs¹
- gb: added rumble input¹
- gb/mbc5: added rumble support²
- gb/mbc6: added skeleton driver, but it doesn't boot Net de Get
- gb/mbc7: added mostly complete driver (only missing EEPROM), but it
doesn't boot Kirby Tilt 'n' Tumble
- gb/tama: added leap year assignment
- tomoko: fixed macOS compilation [MerryMage]
- hiro/cocoa: fix table cell redrawing on updates and automatic column
resizing [ncbncb]
- hiro/cocoa: fix some weird issue with clicking table view checkboxes
on Retina displays [ncbncb]
- icarus: enhance Game Boy heuristics³
- nall: fix three missing return statements [Jonas Quinn]
- ruby: hopefully fixed all compilation errors reported by Screwtape
et al⁴
¹: because there's no concept of a controller for cartridge inputs,
I'm attaching to the base platform for now. An idea I had was to make
separate ports for each cartridge type ... but this would duplicate the
rumble input between MBC5 and MBC7. And would also be less discoverable.
But it would be more clean in that users wouldn't think the Game Boy
hardware had this functionality. I'll think about it.
²: it probably won't work yet. Rumble isn't documented anywhere, but
I dug through an emulator named GEST and discovered that it seems to use
bit 3 of the RAM bank select to be rumble. I don't know if it sets the
bit for rumbling, then clears when finished, or if it sets it and then
after a few milliseconds it stops rumbling. I couldn't test on my
FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist
on FreeBSD, and nobody has ever posted any working code for how to use
evdev (or whatever it's called) on FreeBSD.
³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since
it's not really static RAM.
⁴: if possible, please test all drivers if you can. I want to ensure
they're all working. Especially let me know if the following work:
macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao)
If I can confirm these are working, I'm going to then remove them from
being included with stock higan builds.
I'm also considering dropping SDL video on Linux/BSD. XShm is much
faster and supports blurring. I may also drop SDL input on Linux, since
udev works better. That will free a dependency on SDL 1.2 for building
higan. FreeBSD is still going to need it for joypad support, however.
|
|
|
Tim Allen
|
17697317d4 |
Update to v103r14 release.
byuu says:
Changelog:
- tomoko: by popular choice, default to adaptive mode on new installs
- hiro/windows: fix bug that was preventing the escape key from
closing some dialog windows
- nall/registry: use "\\\\" as separator instead of "/" ... because
some registry keys contain "/" in them >_>
- ruby: add ASIO driver stub (so far it can only initialize and grab
the driver name/version information)
|
|
|
Tim Allen
|
ed5ec58595 |
Update to v103r13 release.
byuu says:
Changelog:
- gb/interface: fix Game Boy Color extension to be "gbc" and not "gb"
[hex\_usr]
- ms/interface: move Master System hardware controls below controller
ports
- sfc/ppu: improve latching behavior of BGnHOFS registers (not
hardware verified) [AWJ]
- tomoko/input: rework port/device mapping to support non-sequential
ports and devices¹
- todo: should add move() to inputDevice.mappings.append and
inputPort.devices.append
- note: there's a weird GCC 4.9 bug with brace initialization of
InputEmulator; have to assign each field separately
- tomoko: all windows sans the main presentation window can be
dismissed with the escape key
- icarus: the single file selection dialog ("Load ROM Image...") can
be dismissed with the escape key
- tomoko: do not pause emulation when FocusLoss/Pause is set during
exclusive fullscreen mode
- hiro/(windows,gtk,qt): implemented Window::setDismissable() function
(missing from cocoa port, sorry)
- nall/string: fixed printing of largest possible negative numbers (eg
`INT_MIN`) [Sintendo]
- only took eight months! :D
¹: When I tried to move the Master System hardware port below the
controller ports, I ran into a world of pain.
The input settings list expects every item in the
`InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be
populated with valid results. But these would be sparsely populated
based on the port and device IDs from inside higan. And that is done so
that the Interface::inputPoll can have O(1) lookup of ports and devices.
This worked because all the port and device IDs were sequential (they
left no gaps in the maps upon creating the lists.)
Unfortunately by changing the expectation of port ID to how it appears
in the list, inputs would not poll correctly. By leaving them alone and
just moving Hardware to the third position, the Game Gear would be
missing port IDs of 0 and 1 (the controller ports of the Master System).
Even by trying to make separate MasterSystemHardware and
GameGearHardware ports, things still fractured when the devices were no
longer contigious.
I got pretty sick of this and just decided to give up on O(1)
port/device lookup, and moved to O(n) lookup. It only knocked the
framerate down by maybe one frame per second, enough to be in the margin
of error. Inputs aren't polled *that* often for loops that usually
terminate after 1-2 cycles to be too detrimental to performance.
So the new input system now allows non-sequential port and device IDs.
Remember that I killed input IDs a while back. There's never any reason
for those to need IDs ... it was easier to just order the inputs in the
order you want to see them in the user interface. So the input lookup is
still O(1). Only now, everything's safer and I return a
maybe<InputMapping&>, and won't crash out the program trying to use a
mapping that isn't found for some reason.
Errata: the escape key isn't working on the browser/message dialogs on
Windows, because of course nothing can ever just be easy and work for
me. If anyone else wouldn't mind looking into that, I'd greatly
appreciate it.
Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it
seems to not respond to the escape key on modal dialogs. If I put the
`WM_KEYDOWN` test in the main window proc, then it doesn't seem to get
called for `VK_ESCAPE` at all, and doesn't get called period for modal
windows. So I'm at a loss and it's past 4AM here >_>
|
|
|
Tim Allen
|
ecc7e899e0 |
Update to v103r01 release.
byuu says:
Changelog:
- nall/dsp: improve one pole coefficient calculations [Fatbag]
- higan/audio: reworked filters to support selection of either one
pole (first-order) or biquad (second-order) filters
- note: the design is not stable yet; so forks should not put too
much effort into synchronizing with this change yet
- fc: added first-order filters as per NESdev wiki (90hz lowpass +
440hz lowpass + 14khz highpass)
- fc: created separate NTSC-J and NTSC-U regions
- NESdev wiki says the Japanese Famicom uses a separate audio
filtering strategy, but details are fuzzy
- there's also cartridge audio output being disabled on NES units;
and differences with controllers
- this stuff will be supported in the future, just adding the
support for it now
- gba: corrected serious bugs in PSG wave channel emulation [Cydrak]
- note that if there are still bugs here, it's my fault
- md/psg,ym2612: added first-order low-pass 2840hz filter to match
VA3-VA6 Mega Drives
- md/psg: lowered volume relative to the YM2612
- using 0x1400; multiple people agreed it was the closest to the
hardware recordings against a VA6
- ms,md/psg: don't serialize the volume levels array
- md/vdp: Hblank bit acts the same during Vblank as outside of it (it
isn't always set during Vblank)
- md/vdp: return isPAL in bit 0 of control port reads
- tomoko: change command-line option separator from : to |
- [Editor's note: This change was present in the public v103,
but it's in this changelog because it was made after the v103 WIP]
- higan/all: change the 20hz high-pass filters from second-order
three-pass to first-order one-pass
- these filters are meant to remove DC bias, but I honestly can't
hear a difference with or without them
- so there's really no sense wasting CPU power with an extremely
powerful filter here
Things I did not do:
- change icarus install rule
- work on 8-bit Mega Drive SRAM
- work on Famicom or Mega Drive region detection heuristics in icarus
My long-term dream plan is to devise a special user-configurable
filtering system where you can set relative volumes and create your own
list of filters (any number of them in any order at any frequency), that
way people can make the systems sound however they want.
Right now, the sanest place to put this information is inside the
$system.sys/manifest.bml files. But that's not very user friendly, and
upgrading to new versions will lose these changes if you don't copy them
over manually. Of course, cluttering the GUI with a fancy filter editor
is probably supreme overkill for 99% of users, so maybe that's fine.
|
|
|
Tim Allen
|
8af3e4a6e2 |
Update to v102r22 release.
byuu says:
Changelog:
- higan: Emulator::Interface::videoSize() renamed to videoResolution()
- higan: Emulator::Interface::rtcsync() renamed to rtcSynchronize()
- higan: added video display rotation support to Video
- GBA: substantially improved audio mixing
- fixed bug with FIFO 50%/100% volume setting
- now properly using SOUNDBIAS amplitude to control output
frequencies
- reduced quantization noise
- corrected relative volumes between PSG and FIFO channels
- both PSG and FIFO values cached based on amplitude; resulting in
cleaner PCM samples
- treating PSG volume=3 as 200% volume instead of 0% volume now
(unverified: to match mGBA)
- GBA: properly initialize ALL CPU state; including the vital
prefetch.wait=1 (fixes Classic NES series games)
- GBA: added video rotation with automatic key translation support
- PCE: reduced output resolution scalar from 285x242 to 285x240
- the extra two scanlines won't be visible on most TVs; and they
make all other cores look worse
- this is because all other cores output at 240p or less; so they
were all receiving black bars in windowed mode
- tomoko: added "Rotate Display" hotkey setting
- tomoko: changed hotkey multi-key logic to OR instead of AND
- left support for flipping it back inside the core; for those so
inclined; by uncommenting one line in input.hpp
- tomoko: when choosing Settings→Configuration, it will
automatically select the currently loaded system
- for instance, if you're playing a Game Gear game, it'll take you
to the Game Gear input settings
- if no games are loaded, it will take you to the hotkeys panel
instead
- WS(C): merged "Hardware-Vertical", "Hardware-Horizontal" controls
into combined "Hardware"
- WS(C): converted rotation support from being inside the core to
using Emulator::Video
- this lets WS(C) video content scale larger now that it's not
bounded by a 224x224 square box
- WS(C): added automatic key rotation support
- WS(C): removed emulator "Rotate" key (use the general hotkey
instead; I recommend F8 for this)
- nall: added serializer support for nall::Boolean (boolean) types
- although I will probably prefer the usage of uint1 in most cases
|
|
|
Tim Allen
|
a4629e1f64 |
Update to v102r21 release.
byuu says:
Changelog:
- GBA: fixed WININ2 reads, BG3PB writes [Jonas Quinn]
- R65816: added support for yielding/resuming from WAI/STP¹
- SFC: removed status.dmaCounter functionality (also fixes possible
TAS desync issue)
- tomoko: added support for combinatorial inputs [hex\_usr\]²
- nall: fixed missing return value from Arithmetic::operator--
[Hendricks266]
Now would be the time to start looking for major regressions with the
new GBA PPU renderer, I suppose ...
¹: this doesn't matter for the master thread (SNES CPU), but is
important for slave threads (SNES SA1). If you try to save a state and
the SA1 is inside of a WAI instruction, it will get stuck there forever.
This was causing attempts to create a save state in Super Bomberman
- Panic Bomber W to deadlock the emulator and crash it. This is now
finally fixed.
Note that I still need to implement similar functionality into the Mega
Drive 68K and Z80 cores. They still have the possibility of deadlocking.
The SNES implementation was more a dry-run test for this new
functionality. This possible crashing bug in the Mega Drive core is the
major blocking bug for a new official release.
²: many, many thanks to hex\_usr for coming up with a really nice
design. I mostly implemented it the exact same way, but with a few tiny
differences that don't really matter (display " and ", " or " instead of
" & ", " | " in the input settings windows; append → bind;
assignmentName changed to displayName.)
The actual functionality is identical to the old higan v094 and earlier
builds. Emulated digital inputs let you combine multiple possible keys
to trigger the buttons. This is OR logic, so you can map to eg
keyboard.up OR gamepad.up for instance. Emulated analog inputs always
sum together. Emulated rumble outputs will cause all mapped devices to
rumble, which is probably not at all useful but whatever. Hotkeys use
AND logic, so you have to press every key mapped to trigger them. Useful
for eg Ctrl+F to trigger fullscreen.
Obviously, there are cases where OR logic would be nice for hotkeys,
too. Eg if you want both F11 and your gamepad's guide button to trigger
the fullscreen toggle. Unfortunately, this isn't supported, and likely
won't ever be in tomoko. Something I might consider is a throw switch in
the configuration file to swap between AND or OR logic for hotkeys, but
I'm not going to allow construction of mappings like "(Keyboard.Ctrl and
Keyboard.F) or Gamepad.Guide", as that's just too complicated to code,
and too complicated to make a nice GUI to set up the mappings for.
|
|
|
Tim Allen
|
3bcf3c24c9 |
Update to v102r20 release.
byuu says:
Changelog:
- nall: `#undef OUT` on Windows platform
- GBA: add missing CPU prefetch state to serialization (this was
breaking serialization in games using ROM prefetch)
- GBA: reset all PPU data in the power() function (some things were
missing before, causing issues on reset)
- GBA: restored horizontal mosaic emulation to the new pixel-based
renderer
- GBA: fixed tilemap background horizontal flipping (Legend of Spyro -
warning screen)
- GBA: fixed d8 bits of scroll registers (ATV - Thunder Ridge Racers -
menu screen)
- SFC: DRAM refresh ticks the ALU MUL/DIV registers five steps forward
[reported by kevtris]
- SFC: merged dmaCounter and autoJoypadCounter into new shared
clockCounter
- left stub for old dmaCounter so that I can do some traces to
ensure the new code's 100% identical
GBA save states would have been broken since whenever I emulated ROM
prefetch. I guess not many people are using the GBA core ...
|
|
|
Tim Allen
|
1ca4609079 |
Update to v102r18 release.
byuu says:
This WIP fixes all the critical pending issues I had open. I'm sure
there's many more that simply didn't make their way into said list. So
by all means, please report important issues you're aware of so they can
get fixed.
Changelog:
- ruby: add variable texture support to GDI video driver [bug
reported by Cydrak]
- ruby: minor cleanups to XShm video driver
- ruby: fix handling of up+down, left+right hat cases for XInput
driver [bug reported by Cydrak]
- nall: fixed vector class so that compilation with GCC 7.1 should
succeed [SuperMikeMan]
- sfc: initialize most DSP registers to random values to fix Magical
Drop [Jonas Quinn]
- sfc: lower PPU brightness when luma=0 from 50% scale to 25% scale;
helps scenes like Final Fantasy III's intro
|
|
|
Tim Allen
|
7e7003fd29 |
Update to v102r15 release.
byuu says:
Changelog:
- nall: added DSP::IIR::OnePole (which is a first-order IIR filter)
- FC/APU: removed strong highpass, weak hipass filters (and the
dummied out lowpass filter)
- MS,GG,MD/PSG: removed lowpass filter
- MS,GG,MD/PSG: audio was not being centered properly; removed
centering for now
- MD/YM2612: fixed clipping of accumulator from 18 signed bits to 14
signed bits (-0x2000 to +0x1fff) [Cydrak]
- MD/YM2612: removed lowpass filter
- PCE/PSG: audio was not being centered properly; removed centering
for now
First thing is that I've removed all of the ad-hoc audio filtering.
Emulator::Stream intrinsically provides a three-pass, second-order
biquad IIR butterworth lowpass filter that clips frequencies above 20KHz
with very good attenuation (as good as IIR gets, anyway.)
It doesn't really make sense to have the various cores running
additional lowpass filters. If we want to filter frequencies below
20KHz, then I can adapt Emulator::Audio::createStream() to take a cutoff
frequency value, and we can do it all at once, with much better quality.
Right now, I don't know what frequencies are best to cut off the various
other audio cores, so they're just gone for now.
As for the highpass filters for the Famicom core, well ... you don't get
aliasing from resampling low frequencies. And generally speaking, too
low a frequency will be inaudible anyway. All these were doing was
killing possible bass (if they were too strong.) We can add them again,
but only if someone can convert Ryphecha's ad-hoc magic integers into a
frequency cutoff. In which case, I'll use my biquad IIR filter to do it
even better. On this note, it may prove useful to do this for the MD PSG
as well, to try and head off unnecessary clamping when mixing with the
YM2612.
Finally, there was the audio centering issue that affected the
MS,GG,MD,PCE,SG cores. It was flooring the "silent" audio level, which
was resulting in extremely heavy distortion if you tried listening to
higan and, say, audacious at the same time. Without the botched
centering, this distortion is completely gone now.
However, without any centering, we've halved the potential volume range.
This means the audio slider in higan's audio settings panel will start
clamping twice as quickly. So ultimately, we need to figure out how to
fix the centering. This isn't as simple as just subtracting less. We
will probably have to center every individual audio channel before
summing them to do this properly.
Results:
On the Mega Drive, Altered Beast sounds quite a bit better, a lot less
distortion now. But it's still not perfect, especially sound effects.
Further, Bare Knuckle / Streets of Rage still has really bad sound
effects. It looks like I broke something in Cydrak's code when trying to
adapt it to my style =(
|
|
|
Tim Allen
|
4c3f9b93e7 |
Update to v102r12 release.
byuu says:
Changelog:
- MD/PSG: fixed 68K bus Z80 status read address location
- MS, GG, MD/PSG: channels post-decrement their counters, not
pre-decrement [Cydrak]¹
- MD/VDP: cache screen width registers once per scanline; screen
height registers once per frame
- MD/VDP: support 256-width display mode (used in Shining Force, etc)
- MD/YM2612: implemented timers²
- MD/YM2612: implemented 8-bit PCM DAC²
- 68000: TRAP instruction should index the vector location by 32 (eg
by 128 bytes), fixes Shining Force
- nall: updated hex(), octal(), binary() functions to take uintmax
instead of template<typename T> parameter³
¹: this one makes an incredible difference. Sie noticed that lots of
games set a period of 0, which would end up being a really long period
with pre-decrement. By fixing this, noise shows up in many more games,
and sounds way better in games even where it did before. You can hear
extra sound on Lunar - Sanposuru Gakuen's title screen, the noise in
Sonic The Hedgehog (Mega Drive) sounds better, etc.
²: this also really helps sound. The timers allow PSG music to play
back at the correct speed instead of playing back way too quickly. And
the PCM DAC lets you hear a lot of drum effects, as well as the
"Sega!!" sound at the start of Sonic the Hedgehog, and the infamous,
"Rise from your grave!" line from Altered Beast.
Still, most music on the Mega Drive comes from the FM channels, so
there's still not a whole lot to listen to.
I didn't implement Cydrak's $02c test register just yet. Sie wasn't 100%
certain on how the extended DAC bit worked, so I'd like to play it a
little conservative and get sound working, then I'll go back and add a
toggle or something to enable undocumented registers, that way we can
use that to detect any potential problems they might be causing.
³: unfortunately we lose support for using hex() on nall/arithmetic
types. If I have a const Pair& version of the function, then the
compiler gets confused on whether Natural<32> should use uintmax or
const Pair&, because compilers are stupid, and you can't have explicit
arguments in overloaded functions. So even though either function would
work, it just decides to error out instead >_>
This is actually really annoying, because I want hex() to be useful for
printing out nall/crypto keys and hashes directly.
But ... this change had to be made. Negative signed integers would crash
programs, and that was taking out my 68000 disassembler.
|