mirror of https://github.com/bsnes-emu/bsnes.git
220 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
ba384a7c48 |
Update to v104 release.
byuu says:
Changelog:
- emulator/interface: removed unused Region struct
- gba/cpu: optimized CPU::step() as much as I could for a slight
speedup¹
- gba/cpu: synchronize the APU better during FIFO updates
- higan/md, icarus: add automatic region detection; make it the
default option [hex\_usr]
- picks NTSC-J if there's more than one match ... eventually, this
will be a setting
- higan/md, icarus: support all three combinations of SRAM (8-bit low,
8-bit high, 16-bit)
- processor/arm7tdmi: fix bug when changing to THUMB mode via MSR
[MerryMage]
- tomoko: redesigned crash detector to only occur once for all three
ruby drivers
- this will reduce disk thrashing since the configuration file
only needs to be written out one extra time
- technically, it's twice ... but we should've always been writing
one out on first run in case it crashes then
- tomoko: defaulted back to the safest ruby drivers, given the optimal
drivers have some stability concerns
¹: minor errata: spotted a typo saying `synchronize(cpu)` when the CPU
is stopped, instead of `synchronize(ppu)`. This will be fixed in the v104
official 7zip archives.
I'm kind of rushing here but, it's really good timing for me to push out
a new official release. The blocking issues are resolved or close to it,
and we need lots of testing of the new major changes.
I'm going to consider this a semi-stable testing release and leave links
to v103 just in case.
|
|
|
Tim Allen
|
55f19c3e0d |
Update to v103r32 release.
byuu says:
Changelog:
- Master System: merged Bus into CPU
- Mega Drive: merged BusCPU into CPU; BusAPU into AU
- Mega Drive: added TMSS emulation; disabled by default [hex\_usr]
- VDP lockout not yet emulated
- processor/arm7tdmi: renamed interrupt() to exception()
- processor/arm7tdmi: CPSR.F (FIQ disable) flag is set on reset
- processor/arm7tdmi: pipeline decode stage caches CPSR.T (THUMB mode)
[MerryMage]
- fixes `msr_tests.gba` test F
- processor/arm7tdmi/disassembler: add PC address to left of currently
executing instruction
- processor/arm7tdmi: stop forcing CPSR.M (mode flags) bit 4 high (I
don't know what really happens here)
- processor/arm7tdmi: undefined instructions now generate Undefined
0x4 exception
- processor/arm7tdmi: thumbInstructionAddRegister masks PC by &~3
instead of &~2
- hopefully this is correct; &~2 felt very wrong
- processor/arm7tdmi: thumbInstructionStackMultiple can use sequential
timing for PC/LR PUSH/POP [Cydrak]
- systems/Mega Drive.sys: added tmss.rom; enable with cpu version=1
- tomoko: detect when a ruby video/audio/input driver crashes higan;
disable it on next program startup
v104 blockers:
- Mega Drive: support 8-bit SRAM (even if we don't support 16-bit;
don't force 8-bit to 16-bit)
- Mega Drive: add region detection support to icarus
- ruby: add default audio device information so certain drivers won't
default to silence out of the box
|
|
|
Tim Allen
|
406b6a61a5 |
Update to v103r31 release.
byuu says:
Changelog:
- gba/cpu: slight speedup to CPU::step()
- processor/arm7tdmi: fixed about ten bugs, ST018 and GBA games are
now playable once again
- processor/arm: removed core from codebase
- processor/v30mz: code cleanup (renamed functions; updated
instruction() for consistency with other cores)
It turns out on my much faster system, the new ARM7TDMI core is very
slightly slower than the old one (by about 2% or so FPS.) But the
CPU::step() improvement basically made it a wash.
So yeah, I'm in really serious trouble with how slow my GBA core is now.
Sigh.
As for higan/processor ... this concludes the first phase of major
cleanups and rewrites.
There will always be work to do, and I have two more phases in mind.
One is that a lot of the instruction disassemblers are very old. One
even uses sprintf still. I'd like to modernize them all. Also, the
ARM7TDMI core (and the ARM core before it) can't really disassemble
because the PC address used for instruction execution is not known prior
to calling instruction(), due to pipeline reload fetches that may occur
inside of said function. I had a nasty hack for debugging the new core,
but I'd like to come up with a clean way to allow tracing the new
ARM7TDMI core.
Another is that I'd still like to rename a lot of instruction function
names in various cores to be more descriptive. I really liked how the
LR35902 core came out there, and would like to get that level of detail
in with the other cores as well.
|
|
|
Tim Allen
|
1067566834 |
Update to v103r30 release.
byuu says: Changelog: - processor/arm7tdmi: completed implemented - gba/cpu, sfc/coprocessor/armdsp: use arm7tdmi instead of arm - sfc/cpu: experimental fix for newly discovered HDMA emulation issue Notes: The ARM7TDMI core crashes pretty quickly when trying to run GBA games, and I'm certain the same will be the case with the ST018. It was never all that likely I could rewrite 70KiB of code in 20 hours and have it work perfectly on the first try. So, now it's time for lots and lots of debugging. Any help would *really* be appreciated, if anyone were up for comparing the two implementations for regressions =^-^= I often have a really hard time spotting simple typos that I make. Also, the SNES HDMA fix is temporary. I would like it if testers could run through a bunch of games that are known for being tricky with HDMA (or if these aren't known to said tester, any games are fine then.) If we can confirm regressions, then we'll know the fix is either incorrect or incomplete. But if we don't find any, then it's a good sign that we're on the right path. |
|
|
Tim Allen
|
559eeccc89 |
Update to v103r29 release.
byuu says:
Changelog:
- processor/arm7tdmi: implementation all nine remaining ARM
instructions
- processor/arm7tdmi: implemented five more THUMB instructions
(sixteen remain)
|
|
|
Tim Allen
|
a72ff8b7fa |
Update to v103r28 release.
byuu says: Changelog: - processor/arm7tdmi: implemented 10 of 19 ARM instructions - processor/arm7tdmi: implemented 1 of 22 THUMB instructions Today's WIP was 6 hours of work, and yesterday's was 5 hours. Half of today was just trying to come up with the design to use a lambda-based dispatcher to map both instructions and disassembly, similar to the 68K core. The problem is that the ARM core has 28 unique bits, which is just far too many bits to have a full lookup table like the 16-bit 68K core. The thing I wanted more than anything else was to perform the opcode bitfield decoding once, and have it decoded for both instructions and the disassembler. It took three hours to come up with a design that worked for the ARM half ... relying on #defines being able to pull in other #defines that were declared and changed later after the first one. But, I'm happy with it. The decoding is in the table building, as it is with the 68K core. The decoding does happen at run-time on each instruction invocation, but it has to be done. As to the THUMB core, I can create a 64K-entry lambda table to cover all possible encodings, and ... even though it's a cache killer, I've decided to go for it, given the outstanding performance it obtained in the M68K core, as well as considering that THUMB mode is far more common in GBA games. As to both cores ... I'm a little torn between two extremes: On the one hand, I can condense the number of ARM/THUMB instructions further to eliminate more redundant code. On the other, I can split them apart to reduce the number of conditional tests needed to execute each instruction. It's really the disassembler that makes me not want to split them up further ... as I have to split the disassembler functions up equally to the instruction functions. But it may be worth it if it's a speed improvement. |
|
|
Tim Allen
|
0b6f1df987 |
Update to v103r27 release.
byuu says:
Changelog:
- hiro/windows: set dpiAware=false, fixes icarus window sizes relative
to higan window sizes
- higan, icarus, hiro, ruby: add support for high resolution displays
on macOS [ncbncb]
- processor/lr35902-legacy: removed
- processor/arm7tdmi: new processor core started; intended to one day
be a replacement for processor/arm
It will probably take several WIPs to get the new ARM core up and
running. It's the last processor rewrite. After this, all processor
cores will be up to date with all my current programming conventions.
|
|
|
Tim Allen
|
020caa546d |
Update to v103r26 release.
byuu says:
Changelog:
- processor/lr35902: completed rewrite
I'd appreciate regression testing of the Game Boy and Game Boy Color
emulation between v103r24 and v103r26 (skip r25) if anyone wouldn't
mind.
I fixed up processor/lr35902-legacy to compile and run, so that trace
logs can be created between the two cores to find errors. I'm going to
kill processor/lr35902-legacy with the next WIP release, as well as make
changes to the trace format (add flags externally from AF; much easier
to read them that way), which will make it more difficult to do these
comparisons in the future, hence r26 may prove important later on if we
miss regressions this time.
As for the speed of the new CPU core, not too much to report ... at
least it's not slower :)
Mega Man II: 212.5 to 214.5fps
Shiro no Sho: 191.5 to 191.5fps
Oracle of Ages: 182.5 to 190.5fps
|
|
|
Tim Allen
|
c2975e6898 |
Update to v103r25 release.
byuu says:
Changelog:
- gb/cpu: force STAT mode to 0 when LCD is disabled (fixes Pokemon
Pinball, etc)
- gb/ppu: when LCD is disabled, require at least one-frame wait to
re-enable, display white during this time
- todo: should step by a scanline at a time: worst-case is an
extra 99% of a frame to enable again
- gba/ppu: cache tilemap lookups and attribute parsing
- it's more accurate because the GBA wouldn't read this for every
pixel
- but unfortunately, this didn't provide any speedup at all ...
sigh
- ruby/audio/alsa: fixed const issue with free()
- ruby/video/cgl: removed `glDisable(GL_ALPHA_TEST)` [deprecated]
- ruby/video/cgl: removed `glEnable(GL_TEXTURE_2D)` [unnecessary as
we use shaders]
- processor/lr35902: started rewrite¹
¹: so, the Game Boy and Game Boy Color cores will be completely
broken for at least the next two or three WIPs.
The old LR35902 was complete garbage, written in early 2011. So I'm
rewriting it to provide a massive cleanup and consistency with other
processor cores, especially the Z80 core.
I've got about 85% of the main instructions implemented, and then I have
to do the CB instructions. The CB instructions are easier because
they're mostly just a small number of opcodes in many small variations,
but it'll still be tedious.
|
|
|
Tim Allen
|
571760c747 |
Update to v103r24 release.
byuu says:
Changelog:
- gb/mbc6: mapper is now functional, but Net de Get has some text
corruption¹
- gb/mbc7: mapper is now functional²
- gb/cpu: HDMA syncs other components after each byte transfer now
- gb/ppu: LY,LX forced to zero when LCDC.d7 is lowered (eg disabled),
not when it's raised (eg enabled)
- gb/ppu: the LCD does not run at all when LCDC.d7 is clear³
- fixes graphical corruption between scene transitions in Legend
of Zelda - Oracle of Ages
- thanks to Cydrak, Shonumi, gekkio for their input on the cause
of this issue
- md/controller: renamed "Gamepad" to "Control Pad" per official
terminology
- md/controller: added "Fighting Pad" (6-button controller) emulation
[hex\_usr]
- processor/m68k: fixed TAS to set data.d7 when
EA.mode==DataRegisterDirect; fixes Asterix
- hiro/windows: removed carriage returns from mouse.cpp and
desktop.cpp
- ruby/audio/alsa: added device driver selection [SuperMikeMan]
- ruby/audio/ao: set format.matrix=nullptr to prevent a crash on some
systems [SuperMikeMan]
- ruby/video/cgl: rename term() to terminate() to fix a crash on macOS
[Sintendo]
¹: The observation that this mapper split $4000-7fff into two banks
came from MAME's implementation. But their implementation was quite
broken and incomplete, so I didn't actually use any of it. The
observation that this mapper split $a000-bfff into two banks came from
Tauwasser, and I did directly use that information, plus the knowledge
that $0400/$0800 are the RAM bank select registers.
The text corruption is due to a race condition with timing. The game is
transferring font letters via HDMA, but the game code ends up setting
the bank# with the font a bit too late after the HDMA has already
occurred. I'm not sure how to fix this ... as a whole, I assumed my Game
Boy timing was pretty good, but apparently it's not that good.
²: The entire design of this mapper comes from endrift's notes.
endrift gets full credit for higan being able to emulate this mapper.
Note that the accelerometer implementation is still not tested, and
probably won't work right until I tweak the sensitivity a lot.
³: So the fun part of this is ... it breaks the strict 60fps rate of
the Game Boy. This was always inevitable: certain timing conditions can
stretch frames, too. But this is pretty much an absolute deal breaker
for something like Vsync timing. This pretty much requires adaptive sync
to run well without audio stuttering during the transition.
There's currently one very important detail missing: when the LCD is
turned off, presumably the image on the screen fades to white. I do not
know how long this process takes, or how to really go about emulating
it. Right now as an incomplete patch, I'm simply leaving the last
displayed image on the screen until the LCD is turned on again. But I
will have to output white, as well as add code to break out of the
emulation loop periodically when the LCD is left off eg indefinitely, or
bad things would happen. I'll work something out and then implement.
Another detail is I'm not sure how long it takes for the LCD to start
rendering again once enabled. Right now, it's immediate. I've heard it's
as long as 1/60th of a second, but that really seems incredibly
excessive? I'd like to know at least a reasonably well-supported
estimate before I implement that.
|
|
|
Tim Allen
|
7022d1aa51 |
Update to v103r23 release.
byuu says:
Changelog:
- gb: added accelerometer X-axis, Y-Axis inputs¹
- gb: added rumble input¹
- gb/mbc5: added rumble support²
- gb/mbc6: added skeleton driver, but it doesn't boot Net de Get
- gb/mbc7: added mostly complete driver (only missing EEPROM), but it
doesn't boot Kirby Tilt 'n' Tumble
- gb/tama: added leap year assignment
- tomoko: fixed macOS compilation [MerryMage]
- hiro/cocoa: fix table cell redrawing on updates and automatic column
resizing [ncbncb]
- hiro/cocoa: fix some weird issue with clicking table view checkboxes
on Retina displays [ncbncb]
- icarus: enhance Game Boy heuristics³
- nall: fix three missing return statements [Jonas Quinn]
- ruby: hopefully fixed all compilation errors reported by Screwtape
et al⁴
¹: because there's no concept of a controller for cartridge inputs,
I'm attaching to the base platform for now. An idea I had was to make
separate ports for each cartridge type ... but this would duplicate the
rumble input between MBC5 and MBC7. And would also be less discoverable.
But it would be more clean in that users wouldn't think the Game Boy
hardware had this functionality. I'll think about it.
²: it probably won't work yet. Rumble isn't documented anywhere, but
I dug through an emulator named GEST and discovered that it seems to use
bit 3 of the RAM bank select to be rumble. I don't know if it sets the
bit for rumbling, then clears when finished, or if it sets it and then
after a few milliseconds it stops rumbling. I couldn't test on my
FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist
on FreeBSD, and nobody has ever posted any working code for how to use
evdev (or whatever it's called) on FreeBSD.
³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since
it's not really static RAM.
⁴: if possible, please test all drivers if you can. I want to ensure
they're all working. Especially let me know if the following work:
macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao)
If I can confirm these are working, I'm going to then remove them from
being included with stock higan builds.
I'm also considering dropping SDL video on Linux/BSD. XShm is much
faster and supports blurring. I may also drop SDL input on Linux, since
udev works better. That will free a dependency on SDL 1.2 for building
higan. FreeBSD is still going to need it for joypad support, however.
|
|
|
Tim Allen
|
e1223366a7 |
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
|
|
|
Tim Allen
|
80841deaa5 |
Update to v103r21 release.
byuu says:
Changelog:
- gb: added TAMA emulation [thanks to endrift for the initial notes]
- gb: save RTC memory to disk (MBC3 doesn't write to said memory yet;
TAMA doesn't emulate it yet)
- gb: expect MMM01 boot loader to be at end of ROM instead of start
- gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of
512-bytes (with padding)
- gb: major cleanups to every cartridge mapper; moved to Mapper class
instead of MMIO class
- gb: don't serialize all mapper states with every save state; only
serialize the active mapper
- gb: serialize RAM even if a battery isn't present¹
- gb/cartridge: removed unnecessary code; refactored other code to
eliminate duplication of functions
- icarus: improve GB(C) heuristics generation to not include filenames
for cartridges without battery backup
- icarus: remove incorrect rearrangement of MMM01 ROM data
- md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr]
- tomoko: hide the main higan window when entering fullscreen
exclusive mode; helps with multi-monitor setups
- tomoko: destroy ruby drivers before calling Application::quit()
[Screwtape]
- libco: add settings.h and defines to fiber, ucontext [Screwtape]
¹: this is one of those crystal clear indications that nobody's
actually playing the higan DMG/CGB cores, or at least not with save
states. This was a major mistake.
Note: I can't find any official documentation that `GL_ALPHA_TEST` was
removed from OpenGL 3.2. Since it's not hurting anything except showing
some warnings in debug mode, I'm just going to leave it there for now.
|
|
|
Tim Allen
|
d5c09c9ab1 |
Update to v103r20 release.
byuu says: Changelog: - ruby/audio/xaudio2: ported to new ruby API - ruby/video/cgl: ported to new ruby API (untested, won't compile) - ruby/video/directdraw: ported to new ruby API - ruby/video/gdi: ported to new ruby API - ruby/video/glx: ported to new ruby API - ruby/video/wgl: ported to new ruby API - ruby/video/opengl: code cleanups The macOS CGL driver is sure to have compilation errors. If someone will post the compilation error log, I can hopefully fix it in one or two iterations of WIPs. I am unable to test the Xorg GLX driver, because my FreeBSD desktop video card drivers do not support OpenGL 3.2. If the driver doesn't work, I'm going to need help tracking down what broke from the older releases. The real fun is still yet to come ... all the Linux-only drivers, where I don't have a single Linux machine to test with. Todo: - libco/fiber - libco/ucontext (I should really just delete this) - tomoko: hide main UI window when in exclusive fullscreen mode |
|
|
Tim Allen
|
8be474b0ac |
Update to v103r19 release.
byuu says:
Changelog:
- tomoko: Application::onMain assigned at end of Program::Program()
[Screwtape]¹
- libco: add `#define _XOPEN_SOURCE 500` to fix compilation of sjlj.c
[Screwtape]
- ruby/audio/openal: fixed device driver string list enumeration
- ruby/audio/wasapi: changing device re-initializes the driver now
- ruby/audio/wasapi: probably a pointless change, but don't fill the
buffer beyond the queue size with silence
- ruby/video/xvideo: renamed from ruby/video/xv
- ruby/video/xvideo: check to see if `XV_AUTOPAINT_COLORKEY` exists
before setting it [SuperMikeMan]
- ruby/video/xvideo: align buffer sizes to be evenly divisible by four
[SuperMikeMan]
- ruby/video/xvideo: fail nicely without crashing (hopefully)
- ruby/video/xvideo: add support for YV12 and I420 12-bit planar YUV
formats²
¹: prevents crashes when drivers fail to initialize from running the
main loop that polls input drivers before the input driver is
initialized (or fails to initialize itself.) Some drivers still don't
block their main functions when initialization fails, so they will still
crash, but I'll work to fix them.
²: this was a **major** pain in the ass, heh. You only get one chroma
sample for every four luma samples, so the color reproduction is even
worse than UYVY and YUYV (which is two to four chroma to luma.) Further,
the planar format took forever to figure out. Apparently it doesn't care
what portion of the image you specify in XvShmPutImage, it expects you
to use the buffer dimensions to locate the U and V portions of the data.
This is probably the most thorough X-Video driver in existence now.
Notes:
- forgot to rename the configuration settings dialog window title to
just "Settings"
|
|
|
Tim Allen
|
284e4c043e |
Update to v103r18 release.
byuu says:
Changelog:
- tomoko: improved handling of changing audio devices on the audio
settings panel
- ruby/audio/wasapi: added device enumeration and selection support¹
- ruby/audio/wasapi: release property store handle from audio device
- ruby/audio/wasapi: fix exclusive mode buffer filling
- ruby/video/glx2: ported to new API -- tested and confirmed working
great²
- ruby/video/sdl: fixed initialization -- tested and confirmed working
on FreeBSD now³
- ruby/video/xv: ported to new API -- tested and mostly working great,
sans fullscreen mode⁴
Errata:
- accidentally changed "Driver Settings" label to "Driver" on the
audio settings tab because I deleted the line and forgot the
"Settings" part
- need to use "return initialize();" from setDevice() in the WASAPI
driver, instead of "return true;", so device selection is currently
not functioning in this WIP for said driver
¹: for now, this will likely end up selecting the first available
endpoint device, which is probably wrong. I need to come up with a
system to expose good 'default values' when selecting new audio drivers,
or changing audio device settings.
²: glx2 is a fallback driver for system with only OpenGL 2.0 and no
OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards.
³: although I really should track down why InputManager::poll() is
crashing the emulator when Video::ready() returns false ...
⁴: really bizarrely, when entering fullscreen mode, it looks like the
image was a triangle strip, and the bottom right triange is missing, and
the top left triangle skews the entire image into it. I'm suspecting
this is a Radeon driver bug when trying to create a 2560x1600 X-Video
surface. The glitch persists when exiting fullscreen, too.
If anyone can test the X-Video driver on their Linux/BSD system, it'd be
appreciated. If it's just my video card, I'll ignore it. If not,
hopefully someone can find the cause of the issue :|
|
|
|
Tim Allen
|
0b4e7fb5a5 |
Update to v103r17 release.
byuu says:
Changelog:
- tomoko: re-hid the video sync option¹
- tomoko: removed " Settings" duplication on all the individual
settings tab options
- ruby/audio/wasapi: finished port to new syntax; adapted to an
event-driven model; support 32-bit integral audio²
- ruby/video/sdl: ported to new syntax; disabled driver on FreeBSD³
¹: still contemplating a synchronize submenu of {none, video, audio},
but ... the fact that video can't work on PAL, WonderSwan games is a
real limitation for it
²: this driver actually received a ton of work. There's also a new
ring-buffer queue, and I added special handling for when exclusive mode
fails because the latency requested is lower than the hardware can
support. It'll pick the closest latency to the minimum that is possible
in this case.
On my Audigy Rx, the results for non-exclusive mode are the same. For
exclusive mode, the framerate drops from 60fps to ~50fps for smaller
buffers, and ~55fps for larger buffers (no matter how big, it never hits
60fps.) This is a lot better than before where it was hitting ~15fps,
but unfortunately it's the best I can do.
The event system used by WASAPI is really stupid. It just uses SetEvent
at some arbitrary time, and you have to query to see how many samples
it's waiting on. This makes it unknowable how many samples we should
buffer before calling `WaitForSingleObject(INFINITE)`, and it's also
unclear how we should handle cases where there's more samples available
than our queue has: either we can fill it with zeroes, or we can write
less samples. The former should prevent audio looping effects when
running too slowly, whereas the latter could potentially be too
ambitious when the audio could've recovered from a minor stall.
It's shocking to me how there's as many ways to send audio to a sound
card as there are sound card APIs, when all that's needed is a simple
double buffer and a callback event from another thread to do it right.
It's also terrifying how unbelievably shitty nearly all sound card
drivers apparently are.
Also, I don't know if cards can output an actual 24-bit mode with three
byte audio samples, or if they always just take 32-bit samples and
ignore the lower 8-bits. Whatever, it's all nonsense for the final
output to be >16-bits anyway (hi, `double[]` input from ruby.)
³: unfortunately, this driver always crashes on FreeBSD (even before
the rewrite), so I'll need someone on Linux to test it and make sure it
actually works. I'll also need testing for a lot of the other drivers as
well, once they're ported over (I don't have X-video, PulseAudio, ALSA,
or udev.)
Note that I forgot to set `_ready=true` at the end of `initialize()`,
and `_ready=false` in `terminate()`, but it shouldn't actually matter
beyond showing you a false warning message on startup about it failing
to initialize.
|
|
|
Tim Allen
|
f87c6b7ecb |
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
|
|
|
Tim Allen
|
4129630d97 |
Update to v103r15 release.
byuu says:
Changelog:
- ruby: rewrote the API interfaces for Video, Audio, Input
- ruby/audio: can now select the number of output channels (not useful
to higan, sorry)
- ruby/asio: various improvements
- tomoko: audio settings panel can now select separate audio devices
(for ASIO, OSS so far)
- tomoko: audio settings panel frequency and latency lists are
dynamically populated now
Note: due to the ruby API rewrite, most drivers will not compile. Right
now, the following work:
- video: Direct3D, XShm
- audio: ASIO, OSS
- input: Windows, SDL, Xlib
It takes a really long time to rewrite these (six hours to do the
above), so it's going to be a while before we're back at 100%
functionality again.
Errata:
- ASIO needs device(), setDevice()
- need to call setDevice() at program startup to populate
frequency/latency settings properly
- changing the device and/or frequency needs to update the emulator
resampler rates
The really hard part is going to be the last one: the only way to change
the emulator frequency is to flush all the audio streams and then
recompute all the coefficients for the resamplers. If this is called
during emulation, all audio streams will be erased and thus no sound
will be output. I'll most likely be forced to simply ignore
device/frequency changes until the user loads another game. It is at
least possible to toggle the latency dynamically.
|
|
|
Tim Allen
|
17697317d4 |
Update to v103r14 release.
byuu says:
Changelog:
- tomoko: by popular choice, default to adaptive mode on new installs
- hiro/windows: fix bug that was preventing the escape key from
closing some dialog windows
- nall/registry: use "\\\\" as separator instead of "/" ... because
some registry keys contain "/" in them >_>
- ruby: add ASIO driver stub (so far it can only initialize and grab
the driver name/version information)
|
|
|
Tim Allen
|
ed5ec58595 |
Update to v103r13 release.
byuu says:
Changelog:
- gb/interface: fix Game Boy Color extension to be "gbc" and not "gb"
[hex\_usr]
- ms/interface: move Master System hardware controls below controller
ports
- sfc/ppu: improve latching behavior of BGnHOFS registers (not
hardware verified) [AWJ]
- tomoko/input: rework port/device mapping to support non-sequential
ports and devices¹
- todo: should add move() to inputDevice.mappings.append and
inputPort.devices.append
- note: there's a weird GCC 4.9 bug with brace initialization of
InputEmulator; have to assign each field separately
- tomoko: all windows sans the main presentation window can be
dismissed with the escape key
- icarus: the single file selection dialog ("Load ROM Image...") can
be dismissed with the escape key
- tomoko: do not pause emulation when FocusLoss/Pause is set during
exclusive fullscreen mode
- hiro/(windows,gtk,qt): implemented Window::setDismissable() function
(missing from cocoa port, sorry)
- nall/string: fixed printing of largest possible negative numbers (eg
`INT_MIN`) [Sintendo]
- only took eight months! :D
¹: When I tried to move the Master System hardware port below the
controller ports, I ran into a world of pain.
The input settings list expects every item in the
`InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be
populated with valid results. But these would be sparsely populated
based on the port and device IDs from inside higan. And that is done so
that the Interface::inputPoll can have O(1) lookup of ports and devices.
This worked because all the port and device IDs were sequential (they
left no gaps in the maps upon creating the lists.)
Unfortunately by changing the expectation of port ID to how it appears
in the list, inputs would not poll correctly. By leaving them alone and
just moving Hardware to the third position, the Game Gear would be
missing port IDs of 0 and 1 (the controller ports of the Master System).
Even by trying to make separate MasterSystemHardware and
GameGearHardware ports, things still fractured when the devices were no
longer contigious.
I got pretty sick of this and just decided to give up on O(1)
port/device lookup, and moved to O(n) lookup. It only knocked the
framerate down by maybe one frame per second, enough to be in the margin
of error. Inputs aren't polled *that* often for loops that usually
terminate after 1-2 cycles to be too detrimental to performance.
So the new input system now allows non-sequential port and device IDs.
Remember that I killed input IDs a while back. There's never any reason
for those to need IDs ... it was easier to just order the inputs in the
order you want to see them in the user interface. So the input lookup is
still O(1). Only now, everything's safer and I return a
maybe<InputMapping&>, and won't crash out the program trying to use a
mapping that isn't found for some reason.
Errata: the escape key isn't working on the browser/message dialogs on
Windows, because of course nothing can ever just be easy and work for
me. If anyone else wouldn't mind looking into that, I'd greatly
appreciate it.
Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it
seems to not respond to the escape key on modal dialogs. If I put the
`WM_KEYDOWN` test in the main window proc, then it doesn't seem to get
called for `VK_ESCAPE` at all, and doesn't get called period for modal
windows. So I'm at a loss and it's past 4AM here >_>
|
|
|
Tim Allen
|
434e303ffb |
Update to v103r12 release.
byuu says:
Changelog:
- ruby/video: cleaned up Direct3D9 driver and fixed catastrophic
memory leak
- ruby/video: added fullscreen exclusive mode support to the Direct3D9
driver¹
- ruby/video: minor cosmetic code cleanups to various drivers
- tomoko: added support to always allow input when in fullscreen
exclusive mode
- tomoko: fixed window to not remove resizability flag when exiting
fullscreen mode
¹: I am assuming that exclusive mode will try to capture the primary
monitor. I don't know what will happen in multi-monitor setups, however,
as I don't use such a setup here.
Also, I am using `D3DPRESENT_DISCARD` instead of `D3DPRESENT_FLIP`. I'm
not sure if this will prove better or worse, but I've heard it will
waste less memory, and having a BackBufferCount of 1 should still result
in page flipping anyway. The difference is supposedly just that you
can't rely on the back buffer being a valid copy of the previous frame
like you can with FLIP.
Lastly, if you want Vsync, you can edit the configuration file to enable
that, and then turn off audio sync.
Errata: "pause emulation when focus is lost" is not working with
exclusive mode. I need to add a check to never auto-pause when in
exclusive mode. Thanks to bun for catching that one.
|
|
|
Tim Allen
|
ee982f098a |
Update to v103r11 release.
byuu says:
Changelog:
- tomoko: removed "Settings→Video Emulation→Overscan Mask" setting¹
- tomoko: remove a few unnecessary calls to resizeViewport on startup
- tomoko: only resize main window from video settings when in adaptive
or toggling adaptive mode²
- hiro/windows: add `SWP_NOACTIVATE` flag to prevent focus stealing on
resizing invisible windows³
- hiro/windows: suppress spurious API-generated `onSize()` callback
when calling `setVisible()`
¹: it just seemed like bad design to default to overscan masking
being disabled with overscan masks of 8 horizontal, 8 vertical out of
the box. Users would adjust the sliders and not see anything happening.
Instead, I've set the default masks to zero. If you want to turn off
overscan masking, simply slide those to zero again.
²: I figure the only way we're going to be able to fairly evaluate
Screwtape's suggestion is to try it both ways. And I will admit, I kind
of like the way this works as well ... a lot more so than I thought I
would, so I think it was a great suggestion. Still, now's the time if
people have strong opinions on this. Be sure to try both r10 and r11 to
compare. Barring no other feedback, I'm going to keep it this way.
³: this fixes the blinking of the main window on startup.
Screwtape, thanks again for the improvement suggestions. At this point
though, I am not using a tiling window manager. If you are able to patch
hiro/gtk and/or hiro/qt (I mostly use GTK) to work with tiling window
managers better, I wouldn't mind applying said patches, so long as they
don't break things on my own Xfce desktop with xfwm4.
Also, I noticed one issue with Xfce ... if the window is maximized and I
try to call `Window::setSize()`, it's not actually removing the maximize
flag. We'll need to look into how to add that to GTK, but I don't think
it's a huge issue. A similar glitch happens on windows where the icon
still reflects being maximized, but it does actually shrink, it just
sticks to the top left corner of the screen. So this isn't really a
critical bug, but would be extra polish.
|
|
|
Tim Allen
|
cbbf5ec114 |
Update to v103r10 release.
byuu says:
Changelog:
- tomoko: video scaling options are now resolutions in the
configuration file, eg "640x480", "960x720", "1280x960"
- tomoko: main window is now always resizable instead of fixed width
(also supports maximizing)
- tomoko: added support for non-integral scaling in windowed mode
- tomoko: made the quick/managed state messaging more consistent
- tomoko: hide "Find Codes ..." button from the cheat editor window if
the cheat database is not present
- tomoko: per-game cheats.bml file now goes into the higan/ subfolder
instead of the root folder
So the way the new video system works is you have the following options
on the video settings panel:
Windowed mode: { Aspect correction, Integral scaling, Adaptive }
Fullscreen mode: { Aspect correction, Integral scaling } (and one day,
hopefully Exclusive will be added here)
Whenever you adjust the overscan masking, or you change any of the
windowed or fullscreen mode settings, or you choose a different video
scale from the main menu, or you load a new game, or you unload a game,
or you rotate the display of an emulated system, the resizeViewport
logic will be invoked. This logic will remember the last option you
chose for video scale, and base the new window size on that value as an
upper limit of the new window size.
If you are in windowed mode and have adaptive enabled, it will shrink
the window to fit the contents of the emulated system's video output.
Otherwise, if you are not in integral scaling mode, it will scale the
video as large as possible to fit into the video scaled size you have
selected. Otherwise, it will perform an integral scale and center the
video inside of the viewport.
If you are in fullscreen mode, it's much the same, only there is no
adaptive mode.
A major problem with Xorg is that it's basically impossible to change
the resizability attribute of a window post-creation. You can do it, but
all kinds of crazy issues start popping up. Like if you toggle
fullscreen, then you'll find that the window won't grow past a certain
fairly small size that it's already at, and cannot be shrunk. And the
multipliers will stop expanding the window as large as they should. And
sometimes the UI elements won't be placed in the correct position, or
the video will draw over them. It's a big mess. So I have to keep the
main window always resizable. Also, note that this is not a limitation
of hiro. It's just totally broken in Xorg itself. No amount of fiddling
has ever allowed this to work reliably for me on either GTK+ 2 or Qt 4.
So what this means is ... the adaptive mode window is also resizable.
What happens here is, whenever you drag the corners of the main window
to resize it, or toggle the maximize window button, higan will bypass
the video scale resizing code and instead act as though the adaptive
scaling mode were disabled. So if integral scaling is checked, it'll
begin scaling in integral mode. Otherwise, it'll begin scaling in
non-integral mode.
And because of this flexibility, it no longer made sense for the video
scale menu to be a radio box. I know, it sucks to not see what the
active selection is anymore, but ... say you set the scale to small,
then you accidentally resized the window a little, but want it snapped
back to the proper small resolution dimensions. If it were a radio item,
you couldn't reselect the same option again, because it's already active
and events don't propagate in said case. By turning them into regular
menu options, the video scale menu can be used to restore window sizing.
Errata:
On Windows, the main window blinks a few times on first load. The fix
for that is a safeguard in the video settings code, roughly like so ...
but note you'd need to make a few other changes for this to work against
v103r10:
auto VideoSettings::updateViewport(bool firstRun) -> void {
settings["Video/Overscan/Horizontal"].setValue(horizontalMaskSlider.position());
settings["Video/Overscan/Vertical"].setValue(verticalMaskSlider.position());
settings["Video/Windowed/AspectCorrection"].setValue(windowedModeAspectCorrection.checked());
settings["Video/Windowed/IntegralScaling"].setValue(windowedModeIntegralScaling.checked());
settings["Video/Windowed/AdaptiveSizing"].setValue(windowedModeAdaptiveSizing.checked());
settings["Video/Fullscreen/AspectCorrection"].setValue(fullscreenModeAspectCorrection.checked());
settings["Video/Fullscreen/IntegralScaling"].setValue(fullscreenModeIntegralScaling.checked());
horizontalMaskValue.setText({horizontalMaskSlider.position()});
verticalMaskValue.setText({verticalMaskSlider.position()});
if(!firstRun) presentation->resizeViewport();
}
That'll get it down to one blink, as with v103 official. Not sure I can
eliminate that one extra blink.
I forgot to remove the setResizable toggle on fullscreen mode exit. On
Windows, the main window will end up unresizable after toggling
fullscreen. I missed that one because like I said, toggling resizability
is totally broken on Xorg. You can fix that with the below change:
auto Presentation::toggleFullScreen() -> void {
if(!fullScreen()) {
menuBar.setVisible(false);
statusBar.setVisible(false);
//setResizable(true);
setFullScreen(true);
if(!input->acquired()) input->acquire();
} else {
if(input->acquired()) input->release();
setFullScreen(false);
//setResizable(false);
menuBar.setVisible(true);
statusBar.setVisible(settings["UserInterface/ShowStatusBar"].boolean());
}
resizeViewport();
}
Windows is stealing focus on calls to resizeViewport(), so we need to
deal with that somehow ...
I'm not really concerned about the behavior of shrinking the viewport
below the smallest multiplier for a given system. It might make sense to
snap it to the window size and forego all other scaling, but honestly
... meh. I don't really care. Nobody sane is going to play like that.
|
|
|
Tim Allen
|
7af270aa59 |
Update to v103r09 release.
byuu says:
Changelog:
- gba/apu: fixed wave RAM nibble ordering (fixes audio in Castlevania,
PocketNES)
- emulator: restructured video information to just a single
videoResolution() → VideoResolution function
- returns "projected size" (between 160x144 and 320x240)
- "internal buffer size" (up to 1280x480)
- returns aspect correction multiplier that is to be applied to
the width field
- the value could be < 1.0 to handle systems with taller
pixels; although higan doesn't emulate such a system
- tomoko: all calculations for scaling and overscan masking are done
by the GUI now
- tomoko: aspect correction can be enabled in either windowed or
fullscreen mode separately; moved to Video settings panel
- tomoko: video scaling multipliers (against 320x240) can now me
modified from the default (2,3,4) via the configuration file
- use this as a really barebones way of supporting high DPI
monitors; although the GUI elements won't scale nicely
- if you set a value less than two, or greater than your
resolution divided by 320x240, it's your own fault when things
blow up. I'm not babysitting anyone with advanced config-file
only options.
- tomoko: added new adaptive windowed mode
- when enabled, the window will shrink to eliminate any black
borders when loading a game or changing video settings. The
window will not reposition itself.
- tomoko: added new adaptive fullscreen mode
- when enabled, the integral scaling will be disabled for
fullscreen mode, forcing the video to fill at least one
direction of the video monitor completely.
I expect we will be bikeshedding for the next month on how to describe
the new video options, where they should appear in the GUI, changes
people want, etc ... but suffice to say, I'm happy with the
functionality, so I don't intend to make changes to -what- things do,
but I will entertain better ways to name things.
|
|
|
Tim Allen
|
191a71b291 |
Update to v103r08 release.
byuu says:
Changelog:
- emulator: improved aspect correction accuracy by using
floating-point calculations
- emulator: added videoCrop() function, extended videoSize() to take
cropping parameters¹
- tomoko: the overscan masking function will now actually resize the
viewport²
- gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs
when the CPU is stopped
- md/vdp: center video when overscan is disabled
- pce/vce: resize video output from 1140x240 to 1120x240
- tomoko: resize window scaling from 326x240 to 320x240
- tomoko: changed save slot naming and status bar messages to indicate
quick states vs managed states
- tomoko: added increment/decrement quick state hotkeys
- tomoko: save/load quick state hotkeys now save to slots 1-5 instead
of always to 0
- tomoko: increased overscan range from 0-16 to 0-24 (in case you want
to mask the Master System to 240x192)
¹: the idea here was to decouple raw pixels from overscan masking.
Overscan was actually horrifically broken before. The Famicom outputs at
256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480.
Before, a horizontal overscan mask of 8 would not reduce the Super
Famicom or Mega Drive by nearly as much as the Famicom. WIth the new
videoCrop() function, the internals of pixel size distortions can be
handled by each individual core.
²: furthermore, by taking optional cropping information in
videoSize(), games can scale even larger into the viewport window. So
for example, before the Super Famicom could only scale to 1536x1440. But
by cropping the vertical resolution by 6 (228p effectively, still more
than NTSC can even show), I can now scale to 1792x1596. And wiht aspect
correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me
perfectly crisp pixels without linear interpolation being required.
Errata: for some reason, when I save a new managed state with the SFC
core, the default description is being set to a string of what looks to
be hex numbers. I found the cause ... I'll fix this in the next release.
Note: I'd also like to hide the "find codes..." button if cheats.bml
isn't present, as well as update the SMP TEST register comment from
smp/timing.cpp
|
|
|
Tim Allen
|
d4876a831f |
Update to v103r07 release.
byuu says:
Changelog:
- gba/cpu: massive code cleanup effort
- gba/cpu: DMA can run in between active instructions¹
- gba/cpu: added two-cycle startup delay between DMA activation and
DMA transfers²
- processor/spc700: BBC, BBC, CBNE cycle 4 is an idle cycle
- processor/spc700: ADDW, SUBW, MOVW (read) cycle 4 is an idle cycle
¹: unfortunately, this causes yet another performance penalty for the
poor GBA core =( Also, I think I may have missed disabling DMAs while
the CPU is stopped. I'll fix that in the next WIP.
²: I put the waiting counter decrement at the wrong place, so this
doesn't actually work. Needs to be more like
this:
auto CPU::step(uint clocks) -> void {
for(auto _ : range(clocks)) {
for(auto& timer : this->timer) timer.run();
for(auto& dma : this->dma) if(dma.active && dma.waiting) dma.waiting--;
context.clock++;
}
...
auto CPU::DMA::run() -> bool {
if(cpu.stopped() || !active || waiting) return false;
transfer();
if(irq) cpu.irq.flag |= CPU::Interrupt::DMA0 << id;
if(drq && id == 3) cpu.irq.flag |= CPU::Interrupt::Cartridge;
return true;
}
Of course, the real fix will be restructuring how DMA works, so that
it's always running in parallel with the CPU instead of this weird
design where it tries to run all channels in some kind of loop until no
channels are active anymore whenever one channel is activated.
Not really sure how to design that yet, however.
|
|
|
Tim Allen
|
16f736307e |
Update to v103r06 release.
byuu says:
Changelog:
- processor/spc700: restored fetch/load/store/pull/push shorthand
functions
- processor/spc700: split functions that tested the algorithm used (`op
!= &SPC700:...`) to separate instructions
- mostly for code clarity over code size: it was awkward having
cycle counts change based on a function parameter
- processor/spc700: implemented Overload's new findings on which
cycles are truly internal (no bus reads)
- sfc/smp: TEST register emulation has been vastly improved¹
¹: it turns out that TEST.d4,d5 is the external clock divider (used
when accessing RAM through the DSP), and TEST.d6,d7 is the internal
clock divider (used when accessing IPLROM, IO registers, or during idle
cycles.)
The DSP (24576khz) feeds its clock / 12 through to the SMP (2048khz).
The clock divider setting further divides the clock by 2, 4, 8, or 16.
Since 8 and 16 are not cleanly divislbe by 12, the SMP cycle count
glitches out and seems to take 10 and 2 clocks instead of 8 or 16. This
can on real hardware either cause the SMP to run very slowly, or more
likely, crash the SMP completely until reset.
What's even stranger is the timers aren't affected by this. They still
clock by 2, 4, 8, or 16.
Note that technically I could divide my own clock counters by 24 and
reduce these to {1,2,5,10} and {1,2,4,8}, I instead chose to divide by
12 to better illustrate this hardware issue and better model that the
SMP clock runs at 2048khz and not 1024khz.
Further, note that things aren't 100% perfect yet. This seems to throw
off some tests, such as blargg's `test_timer_speed`. I can't tell how
far off I am because blargg's test tragically doesn't print out fail
values. But you can see the improvements in that higan is now passing
all of Revenant's tests that were obviously completely wrong before.
|
|
|
Tim Allen
|
40802b0b9f |
Update to v103r05 release.
byuu says:
Changelog:
- fc/controller: added ControllerPort class; removed Peripherals class
- md/controller/gamepad: removed X,Y,Z buttons since this isn't a
6-button controller
- ms/controller: added ControllerPort class (not used in Game Gear
mode); removed Peripherals class
- pce/controller: added ControllerPort class; removed Peripherals
class
- processor/spc700: idle(address) is part of SMP class again, contains
flag to detect mov (x)+ edge case
- sfc/controller/super-scope,justifier: use CPU frequency instead of
hard-coding NTSC frequency
- sfc/cpu: move 4x8-bit SMP ports to SMP class
- sfc/smp: move APU RAM to DSP class
- sfc/smp: improved emulation of TEST registers bits 4-7 [information
from nocash]
- d4,d5 is RAM wait states (1,2,5,10)
- d6,d7 is ROM/IO wait states (1,2,5,10)
- sfc/smp: code cleanup to new style (order from lowest to highest
bits; use .bit(s) functions)
- sfc/smp: $00f8,$00f9 are P4/P5 auxiliary ports; named the registers
better
|
|
|
Tim Allen
|
ff3750de4f |
Update to v103r04 release.
byuu says:
Changelog:
- fc/apu: $4003,$4007 writes initialize duty counter to 0 instead of 7
- fc/apu: corrected duty table entries for use with decrementing duty
counter
- processor/spc700: emulated the behavior of cycle 3 of (x)+
instructions to not read I/O registers
- specifically, this prevents reads from $fd-ff from resetting the
timers, as observed on real hardware
- sfc/controller: added ControllerPort class to match Mega Drive
design
- sfc/expansion: added ExpansionPort class to match Mega Drive design
- sfc/system: removed Peripherals class
- sfc/system: changed `colorburst()` to `cpuFrequency()`; added
`apuFrequency()`
- sfc: replaced calls to `system.region == System::Region::*` with
`Region::*()`
- sfc/expansion: remove thread from scheduler when device is destroyed
- sfc/smp: `{read,write}Port` now use a separate 4x8-bit buffer instead
of underlying APU RAM [hex\_usr]
|
|
|
Tim Allen
|
78f341489e |
Update to v103r03 release.
byuu says:
Changelog:
- md/psg: fixed output frequency rate regression from v103r02
- processor/m68k: fixed calculations for ABCD, NBCD, SBCD [hex\_usr,
SuperMikeMan]
- processor/spc700: renamed abbreviated instructions to functional
descriptions (eg `XCN` → `ExchangeNibble`)
- processor/spc700: removed memory.cpp shorthand functions (fetch,
load, store, pull, push)
- processor/spc700: updated all instructions to follow cycle behavior
as documented by Overload with a logic analyzer
Once again, the changes to the SPC700 core are really quite massive. And
this time it's not just cosmetic: the idle cycles have been updated to
pull from various memory addresses. This is why I removed the shorthand
functions -- so that I could handle the at-times very bizarre addresses
the SPC700 has on its address bus during its idle cycles.
There is one behavior Overload mentioned that I don't emulate ... one of
the cycles of the (X) transfer functions seems to not actually access
the $f0-ff internal SMP registers? I don't fully understand what
Overload is getting at, so I haven't tried to support it just yet.
Also, there are limits to logic analyzers. In many cases the same
address is read from twice consecutively. It is unclear which of the two
reads the SPC700 actually utilizes. I tried to choose the most logical
values (usually the first one), but ... I don't know that we'll be able
to figure this one out. It's going to be virtually impossible to test
this through software, because the PC can't really execute out of
registers that have side effects on reads.
|
|
|
Tim Allen
|
3517d5c4a4 |
Update to v103r02 release.
byuu says:
Changelog:
- fc/apu: improved phase duty cycle emulation (mode 3 is 25% phase
inverted; counter decrements)
- md/apu: power/reset do not cancel 68K bus requests
- md/apu: 68K is not granted bus access on Z80 power/reset
- md/controller: replaced System::Peripherals with ControllerPort
concept
- md/controller: CTRL port is now read-write, maintains value across
controller changes (and soon, soft resets)
- md/psg: PSG sampling rate unintentionally modified¹
- processor/spc700: improve cycle timing of (indirect),y instructions
[Overload]
- processor/spc700: idle() cycles actually read from the program
counter; much like the 6502 [Overload]
- some of the idle() cycles should read from other addresses; this
still needs to be supported
- processor/spc700: various cleanups to instruction function naming
- processor/z80: prefix state (HL→IX,IY override) can now be
serialized
- icarus: fix install rule for certain platforms (it wasn't buggy on
FreeBSD, but was on Linux?)
¹: the clock speed of the PSG is oscillator/15. But I was setting the
sampling rate to oscillator/15/16, which was around 223KHz. I am not
sure whether the PSG should be outputting at 3MHz or 223KHz. Amazingly
... I don't really hear a difference either way `o_O` I didn't actually
mean to make this change; I just noticed it after comparing the diff
between r01 and r02. If this turns out to be wrong, set
stream = Emulator::audio.createStream(1, frequency() / 16.0);
in md/psg.cpp to revert this change.
|
|
|
Tim Allen
|
ecc7e899e0 |
Update to v103r01 release.
byuu says:
Changelog:
- nall/dsp: improve one pole coefficient calculations [Fatbag]
- higan/audio: reworked filters to support selection of either one
pole (first-order) or biquad (second-order) filters
- note: the design is not stable yet; so forks should not put too
much effort into synchronizing with this change yet
- fc: added first-order filters as per NESdev wiki (90hz lowpass +
440hz lowpass + 14khz highpass)
- fc: created separate NTSC-J and NTSC-U regions
- NESdev wiki says the Japanese Famicom uses a separate audio
filtering strategy, but details are fuzzy
- there's also cartridge audio output being disabled on NES units;
and differences with controllers
- this stuff will be supported in the future, just adding the
support for it now
- gba: corrected serious bugs in PSG wave channel emulation [Cydrak]
- note that if there are still bugs here, it's my fault
- md/psg,ym2612: added first-order low-pass 2840hz filter to match
VA3-VA6 Mega Drives
- md/psg: lowered volume relative to the YM2612
- using 0x1400; multiple people agreed it was the closest to the
hardware recordings against a VA6
- ms,md/psg: don't serialize the volume levels array
- md/vdp: Hblank bit acts the same during Vblank as outside of it (it
isn't always set during Vblank)
- md/vdp: return isPAL in bit 0 of control port reads
- tomoko: change command-line option separator from : to |
- [Editor's note: This change was present in the public v103,
but it's in this changelog because it was made after the v103 WIP]
- higan/all: change the 20hz high-pass filters from second-order
three-pass to first-order one-pass
- these filters are meant to remove DC bias, but I honestly can't
hear a difference with or without them
- so there's really no sense wasting CPU power with an extremely
powerful filter here
Things I did not do:
- change icarus install rule
- work on 8-bit Mega Drive SRAM
- work on Famicom or Mega Drive region detection heuristics in icarus
My long-term dream plan is to devise a special user-configurable
filtering system where you can set relative volumes and create your own
list of filters (any number of them in any order at any frequency), that
way people can make the systems sound however they want.
Right now, the sanest place to put this information is inside the
$system.sys/manifest.bml files. But that's not very user friendly, and
upgrading to new versions will lose these changes if you don't copy them
over manually. Of course, cluttering the GUI with a fancy filter editor
is probably supreme overkill for 99% of users, so maybe that's fine.
|
|
|
Tim Allen
|
561c6413a4 |
Update to v103 final release.
byuu says (in the public annoucement):
With this release, PC Engine, Master System, Game Gear, Mega Drive and
the newly added SuperGrafx support are now quite usable! They're far
from the best emulators for these systems, but with many bugfixes, full
sound emulation, and save state support ... many games are now fully
playable with decent accuracy. The Game Boy Advance emulation is also
now substantially improved with vastly improved sound quality and a new
dot-based PPU renderer. With that change, every single component in
higan is now cycle-based. Regrettably, these changes do carry a ~20%
performance penalty compared to GBA emulation in v102.
Changelog (since the previous release):
- added SuperGrafx emulation
- improved audio band-pass filtering for all emulated systems
- screen rotation is now a hotkey; automatically rotates control
bindings
- screen rotation now supported on the Game Boy Advance as well (used
by a small number of games)
- massive improvements to Mega Drive emulation
- massive code cleanups and rewrites to many CPU emulation cores
(MOS6502, WDC65816, SPC700, etc)
- Famicom, Master System, Mega Drive: added PAL emulation support
- PC Engine, SuperGrafx, Master System, Game Gear, Mega Drive: added
save state support
- PC Engine, SuperGrafx: added PSG sound emulation
- Master System, Game Gear: added PSG sound emulation
- Mega Drive: added Z80 APU emulation [with help from Cydrak]
- Mega Drive: added PSG sound emulation
- Mega Drive: added YM2612 sound emulation [Cydrak]
- Super Famicom: fixed Super Game Boy emulation
- PC Engine: added save RAM support (using per-game PCE-CD backup RAM)
- Game Boy Advance: substantial improvements to audio emulation
quality
- Game Boy Advance: convert scanline-based PPU renderer to a dot-based
renderer
- Game Boy Advance: properly initialize CPU state (fixes Classic NES
Series games)
- Game Boy Advance: MUL timing corrected [Jonas Quinn]
- Mega Drive: emulate special mappers for Phantasy Star IV, Super
Street Fighter II, etc.
- Super Famicom: use darker luma for INIDISP=0 (large improvement to
Final Fantasy III opening)
- Super Famicom: fixed bugs in SMP OR1,AND1 instructions
- cheat code database regrettably removed from official releases; will
be made available separately
- Famicom: PAL emulation improvements [hex\_usr]
|
|
|
Tim Allen
|
b7006822bf |
Update to v103 WIP release.
byuu says (in the WIP forum):
Changelog:
- higan: cheat codes accept = and ? separators now
- the new preferred code format is: address=value or
address=if-match?value
- the old code format of address/value and address/if-match/value
will continue to work
- higan: cheats.bml is no longer included with the base distribution
- mightymo stopped updating it in 2015, and it's not source code;
it can still be pulled in from older releases
- fc: improved PAL mode timing; use PAL APU timing tables; fix PAL
noise period table [hex\_usr]
- md: support aborting a Z80 bus wait in order to capture save states
without freezing
- note that this will violate accuracy; but in practice a slight
desync is better than an emulator deadlock
- sfc: revert DSP ENDX randomization for now (want to research it more
before deploying in an official release)
- sfc: fix Super Famicom.sys/manifest.bml APU RAM size [hex\_usr]
- tomoko: cleaned up make install rules
- hiro/cocoa: use ABGR for pixel data [Sintendo]
Note: I forgot to change the command-line and drag-and-drop separator
from : to | in this WIP. However, it is corrected in the v103 official
binary and source published on download.byuu.org. Sorry about that, I
know it makes the Git repository history more difficult. I'm not
concerned whether the : → | change is part of v103 or v103r01 in the
repository, and will leave this to your discretion, Screwtape.
I also still need to set the VDP bit to indicate PAL mode in the Mega
Drive core. This is what happens when I have 47 things I have to do,
given how lousy my memory is. I miss things.
|
|
|
Tim Allen
|
8476f35153 |
Update to v102r28 release.
byuu says:
Changelog:
- higan: `Emulator::<Platform::load>()` now returns a struct containing
both a path ID and a string option
- higan: `Emulator::<Platform::load>()` now takes an optional final
argument of string options
- fc: added PAL emulation (finally, only took six years)
- md: added PAL emulation
- md: fixed address parameter to `VDP::Sprite::write()`; fixes missing
sprites in Super Street Fighter II
- md: emulated HIRQ counter; fixes many games
- Super Street Fighter II - status bar
- Altered Beast - status bar
- Sonic the Hedgehog - Labyrinth Zone - water effect
- etc.
- ms: added PAL emulation
- sfc: added the ability to override the default region auto-detection
- sfc: removed "system.region" override setting from `Super Famicom.sys`
- tomoko: added options list to game folder load dialog window
- tomoko: added the ability to specify game folder load options on the
command-line
So, basically ... Sega forced a change with the way region detection
works. You end up with games that can run on multiple regions, and the
content changes accordingly. Bare Knuckle in NTSC-J mode will become
Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and
PAL mode.
In my view, there should be a separate ROM for each region a game was
released in, even if the ROM content were identical. But unfortunately
that's not how things were done by anyone else.
So to support this, the higan load dialog now has a drop-down at the
bottom-right, where you can choose the region to load games from. On the
SNES, it defaults to "Auto", which will pull the region setting from the
manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I
can't auto-detect the region from the ROM header. $1f0 is supposed to
contain a string like "JUE", but instead you get games like Maui Mallard
that put an "A" there, and other such nonsense. Sega was far more lax
than Nintendo with the ROM header validity. So for now at least, you
have to manually select your region every time you play a Mega Drive
game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the
Master System for the same reason, but there's only "NTSC" and "PAL"
here. I'm not sure if games have a way to detect domestic vs
international consoles.
And for now ... the Famicom is the same as well, with no auto-detection.
I'd sincerely hope iNES has a header bit for the region, but I didn't
bother with updating icarus to support that yet.
The way to pass these parameters on the command-line is to prefix the
game path with "option:", so for example:
higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md"
If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or
Auto.) Obviously, it's not possible to pass parameters with
drag-and-drop, so you will always get the default option in said case.
|
|
|
Tim Allen
|
e7806dd6e8 |
Update to v102r27 release.
byuu says:
Changelog:
- processor/gsu: minor code cleanup
- processor/hg51b: renamed reg(Read,Write) to register(Read,Write)
- processor/lr35902: minor code cleanup
- processor/spc700: completed code cleanup (sans disassembler)
- no longer uses internal global state inside instructions
- processor/spc700: will no longer hang the emulator if stuck in a WAI
(SLEEP) or STP (STOP) instruction
- processor/spc700: fixed bug in handling of OR1 and AND1 instructions
- processor/z80: minor code cleanup
- sfc/dsp: revert to initializing registers to 0x00; save for
ENDX=random(), FLG=0xe0 [Jonas Quinn]
Major testing of the SNES game library would be appreciated, now that
its CPU cores have all been revised.
We know the DSP registers read back as randomized data ... mostly, but
there are apparently internal latches, which we can't emulate with the
current DSP design. So until we know which registers have separate
internal state that actually *is* initialized, I'm going to play it safe
and not break more games.
Thanks again to Jonas Quinn for the continued research into this issue.
EDIT: that said ... `MD works if((ENDX&0x30) > 0)` is only a 3:4 chance
that the game will work. That seems pretty unlikely that the odds of it
working are that low, given hardware testing by others in the past :/ I
thought if worked if `PITCH != 0` before, which would have been way more
likely.
The two remaining CPU cores that need major cleanup efforts are the
LR35902 and ARM cores. Both are very large, complicated, annoying cores
that will probably be better off as full rewrites from scratch. I don't
think I want to delay v103 in trying to accomplish that, however.
So I think it'll be best to focus on allowing the Mega Drive core to not
lock when processors are frozen waiting on a response from other
processors during a save state operation. Then we should be good for a
new release.
|
|
|
Tim Allen
|
50411a17d1 |
Update to v102r26 release.
byuu says:
Changelog:
- md/ym2612: initialize DAC sample to center volume [Cydrak]
- processor/arm: add accumulate mode extra cycle to mlal [Jonas
Quinn]
- processor/huc6280: split off algorithms, improve naming of functions
- processor/mos6502: split off algorithms
- processor/spc700: major revamp of entire core (~50% completed)
- processor/wdc65816: fixed several bugs introduced by rewrite
For the SPC700, this turns out to be very old code as well, with global
object state variables, those annoying `{Boolean,Natural}BitField` types,
`under_case` naming conventions, heavily abbreviated function names, etc.
I'm working to get the code to be in the same design as the MOS6502,
HuC6280, WDC65816 cores, since they're all extremely similar in terms of
architectural design (the SPC700 is more of an off-label
reimplementation of a 6502 core, but still.)
The main thing left is that about 90% of the actual instructions still
need to be adapted to not use the internal state (`aa`, `rd`, `dp`,
`sp`, `bit` variables.) I wanted to finish this today, but ran out of
time before work.
I wouldn't suggest too much testing just yet. We should wait until the
SPC700 core is finished for that. However, if some does want to and
spots regressions, please let me know.
|
|
|
Tim Allen
|
b73d918776 |
Update to v102r25 release.
byuu says:
Changelog:
- processor/arm: corrected MUL instruction timings [Jonas Quinn]
- processor/wdc65816: finished phase two of the rewrite
I'm really pleased with the visual results of the wdc65816 core rewrite.
I was able to eliminate all of the weird `{Boolean,Natural}BitRange`
templates, as well as the need to use unions/structs. Registers are now
just simple `uint24` or `uint16` types (technically they're `Natural<T>`
types, but then all of higan uses those), flags are now just bool types.
I also eliminated all of the implicit object state inside of the core
(aa, rd, dp, sp) and instead do all computations on the stack frame with
local variables. Through using macros to reference the registers and
individual parts of them, I was able to reduce the visual tensity of all
of the instructions. And by using normal types without implicit states,
I was able to eliminate about 15% of the instructions necessary, instead
reusing existing ones.
The final third phase of the rewrite will be to recode the disassembler.
That code is probably the oldest code in all of higan right now, still
using sprintf to generate the output. So it is very long overdue for a
cleanup.
And now for the bad news ... as with any large code cleanup, regression
errors have seeped in. Currently, no games are running at all. I've left
the old disassembler in for this reason: we can compare trace logs of
v102r23 against trace logs of v102r25. The second there's any
difference, we've spotted a buggy instruction and can correct it.
With any luck, this will be the last time I ever rewrite the wdc65816
core. My style has changed wildly over the ~10 years since I wrote this
core, but it's really solidifed in recent years.
|
|
|
Tim Allen
|
6e8406291c |
Update to v102r24 release.
byuu says
Changelog:
- FC: fixed three MOS6502 regressions [hex\_usr]
- GBA: return fetched instruction instead of 0 for unmapped MMIO
(passes all of endrift's I/O tests)
- MD: fix VDP control port read Vblank bit to test screen height
instead of hard-code 240 (fixes Phantasy Star IV)
- MD: swap USP,SSP when executing an exception (allows Super Street
Fighter II to run; but no sprites visible yet)
- MD: grant 68K access to Z80 bus on reset (fixes vdpdoc demo ROM from
freezing immediately)
- SFC: reads from $00-3f,80-bf:4000-43ff no longer update MDR
[p4plus2]
- SFC: massive, eight-hour cleanup of WDC65816 CPU core ... still not
complete
The big change this time around is the SFC CPU core. I've renamed
everything from R65816 to WDC65816, and then went through and tried to
clean up the code as much as possible. This core is so much larger than
the 6502 core that I chose cleaning up the code to rewriting it.
First off, I really don't care for the BitRange style functionality. It
was an interesting experiment, but its fatal flaw are that the types are
just bizarre, which makes them hard to pass around generically to other
functions as arguments. So I went back to the list of bools for flags,
and union/struct blocks for the registers.
Next, I renamed all of the functions to be more descriptive: eg
`op_read_idpx_w` becomes `instructionIndexedIndirectRead16`. `op_adc_b`
becomes `algorithmADC8`. And so forth.
I eliminated about ten instructions because they were functionally
identical sans the index, so I just added a uint index=0 parameter to
said functions. I added a few new ones (adjust→INC,DEC;
pflag→REP,SEP) where it seemed appropriate.
I cleaned up the disaster of the instruction switch table into something
a whole lot more elegant without all the weird argument decoding
nonsense (still need M vs X variants to avoid having to have 4-5
separate switch tables, but all the F/I flags are gone now); and made
some things saner, like the flag clear/set and branch conditions, now
that I have normal types for flags and registers once again.
I renamed all of the memory access functions to be more descriptive to
what they're doing: eg writeSP→push, readPC→fetch,
writeDP→writeDirect, etc. Eliminated some of the special read/write
modes that were only used in one single instruction.
I started to clean up some of the actual instructions themselves, but
haven't really accomplished much here. The big thing I want to do is get
rid of the global state (aa, rd, iaddr, etc) and instead use local
variables like I am doing with my other 65xx CPU cores now. But this
will take some time ... the algorithm functions depend on rd to be set
to work on them, rather than taking arguments. So I'll need to rework
that.
And then lastly, the disassembler is still a mess. I want to finish the
CPU cleanups, and then post a new WIP, and then rewrite the disassembler
after that. The reason being ... I want a WIP that can generate
identical trace logs to older versions, in case the CPU cleanup causes
any regressions. That way I can more easily spot the errors.
Oh ... and a bit of good news. v102 was running at ~140fps on the SNES
core. With the new support to suspend/resume WAI/STP, plus the internal
CPU registers not updating the MDR, the framerate dropped to ~132fps.
But with the CPU cleanups, performance went back to ~140fps. So, hooray.
Of course, without those two other improvements, we'd have ended up at
possibly ~146-148fps, but oh well.
|
|
|
Tim Allen
|
cea64b9991 |
Update to v102r23 release.
byuu says:
Changelog:
- rewrote the 6502 CPU core from scratch. Now called MOS6502,
supported BCD mode
- Famicom core disables BCD mode via MOS6502::BCD = 0;
- renamed r65816 folder to wdc65816 (still need to rename the actual
class, though ...)
Note: need to remove build rules for the now renamed r6502, r65816
objects from processor/GNUmakefile.
So this'll seem like a small WIP, but it was a solid five hours to
rewrite the entire 6502 core. The reason I wanted to do this was because
the old 6502 core was pretty sloppy. My coding style improved a lot, and
I really liked how the HuC6280 CPU core came out, so I wanted the 6502
core to be like that one.
The core can now support BCD mode, so hopefully that will prove useful
to hex\_usr and allow one core to run both the NES and his Atari 2600
cores at some point.
Note that right now, the core doesn't support any illegal instructions.
The old core supported a small number of them, but were mostly the no
operation ones. The goal is support all of the illegal instructions at
some point.
It's very possible the rewrite introduced some regressions, so thorough
testing of the NES core would be appreciated if anyone were up for it.
|
|
|
Tim Allen
|
8af3e4a6e2 |
Update to v102r22 release.
byuu says:
Changelog:
- higan: Emulator::Interface::videoSize() renamed to videoResolution()
- higan: Emulator::Interface::rtcsync() renamed to rtcSynchronize()
- higan: added video display rotation support to Video
- GBA: substantially improved audio mixing
- fixed bug with FIFO 50%/100% volume setting
- now properly using SOUNDBIAS amplitude to control output
frequencies
- reduced quantization noise
- corrected relative volumes between PSG and FIFO channels
- both PSG and FIFO values cached based on amplitude; resulting in
cleaner PCM samples
- treating PSG volume=3 as 200% volume instead of 0% volume now
(unverified: to match mGBA)
- GBA: properly initialize ALL CPU state; including the vital
prefetch.wait=1 (fixes Classic NES series games)
- GBA: added video rotation with automatic key translation support
- PCE: reduced output resolution scalar from 285x242 to 285x240
- the extra two scanlines won't be visible on most TVs; and they
make all other cores look worse
- this is because all other cores output at 240p or less; so they
were all receiving black bars in windowed mode
- tomoko: added "Rotate Display" hotkey setting
- tomoko: changed hotkey multi-key logic to OR instead of AND
- left support for flipping it back inside the core; for those so
inclined; by uncommenting one line in input.hpp
- tomoko: when choosing Settings→Configuration, it will
automatically select the currently loaded system
- for instance, if you're playing a Game Gear game, it'll take you
to the Game Gear input settings
- if no games are loaded, it will take you to the hotkeys panel
instead
- WS(C): merged "Hardware-Vertical", "Hardware-Horizontal" controls
into combined "Hardware"
- WS(C): converted rotation support from being inside the core to
using Emulator::Video
- this lets WS(C) video content scale larger now that it's not
bounded by a 224x224 square box
- WS(C): added automatic key rotation support
- WS(C): removed emulator "Rotate" key (use the general hotkey
instead; I recommend F8 for this)
- nall: added serializer support for nall::Boolean (boolean) types
- although I will probably prefer the usage of uint1 in most cases
|
|
|
Tim Allen
|
a4629e1f64 |
Update to v102r21 release.
byuu says:
Changelog:
- GBA: fixed WININ2 reads, BG3PB writes [Jonas Quinn]
- R65816: added support for yielding/resuming from WAI/STP¹
- SFC: removed status.dmaCounter functionality (also fixes possible
TAS desync issue)
- tomoko: added support for combinatorial inputs [hex\_usr\]²
- nall: fixed missing return value from Arithmetic::operator--
[Hendricks266]
Now would be the time to start looking for major regressions with the
new GBA PPU renderer, I suppose ...
¹: this doesn't matter for the master thread (SNES CPU), but is
important for slave threads (SNES SA1). If you try to save a state and
the SA1 is inside of a WAI instruction, it will get stuck there forever.
This was causing attempts to create a save state in Super Bomberman
- Panic Bomber W to deadlock the emulator and crash it. This is now
finally fixed.
Note that I still need to implement similar functionality into the Mega
Drive 68K and Z80 cores. They still have the possibility of deadlocking.
The SNES implementation was more a dry-run test for this new
functionality. This possible crashing bug in the Mega Drive core is the
major blocking bug for a new official release.
²: many, many thanks to hex\_usr for coming up with a really nice
design. I mostly implemented it the exact same way, but with a few tiny
differences that don't really matter (display " and ", " or " instead of
" & ", " | " in the input settings windows; append → bind;
assignmentName changed to displayName.)
The actual functionality is identical to the old higan v094 and earlier
builds. Emulated digital inputs let you combine multiple possible keys
to trigger the buttons. This is OR logic, so you can map to eg
keyboard.up OR gamepad.up for instance. Emulated analog inputs always
sum together. Emulated rumble outputs will cause all mapped devices to
rumble, which is probably not at all useful but whatever. Hotkeys use
AND logic, so you have to press every key mapped to trigger them. Useful
for eg Ctrl+F to trigger fullscreen.
Obviously, there are cases where OR logic would be nice for hotkeys,
too. Eg if you want both F11 and your gamepad's guide button to trigger
the fullscreen toggle. Unfortunately, this isn't supported, and likely
won't ever be in tomoko. Something I might consider is a throw switch in
the configuration file to swap between AND or OR logic for hotkeys, but
I'm not going to allow construction of mappings like "(Keyboard.Ctrl and
Keyboard.F) or Gamepad.Guide", as that's just too complicated to code,
and too complicated to make a nice GUI to set up the mappings for.
|
|
|
Tim Allen
|
3bcf3c24c9 |
Update to v102r20 release.
byuu says:
Changelog:
- nall: `#undef OUT` on Windows platform
- GBA: add missing CPU prefetch state to serialization (this was
breaking serialization in games using ROM prefetch)
- GBA: reset all PPU data in the power() function (some things were
missing before, causing issues on reset)
- GBA: restored horizontal mosaic emulation to the new pixel-based
renderer
- GBA: fixed tilemap background horizontal flipping (Legend of Spyro -
warning screen)
- GBA: fixed d8 bits of scroll registers (ATV - Thunder Ridge Racers -
menu screen)
- SFC: DRAM refresh ticks the ALU MUL/DIV registers five steps forward
[reported by kevtris]
- SFC: merged dmaCounter and autoJoypadCounter into new shared
clockCounter
- left stub for old dmaCounter so that I can do some traces to
ensure the new code's 100% identical
GBA save states would have been broken since whenever I emulated ROM
prefetch. I guess not many people are using the GBA core ...
|
|
|
Tim Allen
|
2461293ff0 |
Update to v102r19 release.
byuu says:
Note: add `#undef OUT` to the top of higan/gba/ppu/ppu.hpp to compile on
Windows (ugh ...) Now to await posts about this in four more threads
again ;)
Changelog:
- GBA: rewrote PPU from a scanline-based renderer to a pixel-based
renderer
- ruby: fixed video/gdi bugs
Note that there's an approximately 21% speed penalty compared to v102r18
for the pixel-based renderer.
Also, horizontal mosaic effects are not yet implemented. But they should
be prior to v103. This one is a little tricky as it currently works on
fully rendered scanlines. I need to roll the mosaic into the background
renderers, and then for sprites, well ... see below.
The trickiest part by far of this new renderer is the object (sprite)
system. Unlike every other system I emulate, the GBA supports affine
rendering of its sprites. Or in other words, rotation effects. And it
also has a very complex priority system.
Right now, I can't see any way that the GBA PPU could render pixels in
real-time like this. My belief is that there's a 240-entry buffer that
fills up the next scanline's row of pixels. Which means it probably also
runs on the last scanline of Vblank so that the first scanline has
sprite data.
However, I didn't design my object renderer like this just yet. For now,
it creates a buffer of all 240 pixels right away at the start of the
scanline. I know\!\! That's technically scanline-based. But it's only
for fetching object tiledata, and it's only temporary.
What needs to happen is I need a way to run something like a "mini libco
thread" inside of the main thread, so that the object renderer can run
in parallel with the rest of the PPU, yet not be a hideous abomination
of a state machine, yet also not be horrendously slow as a full libco
thread would be.
I'm envisioning some kind of stackless yielding coroutine. But I'll need
to think through how to design that, given the absence of coroutines
even in C++17.
|
|
|
Tim Allen
|
1ca4609079 |
Update to v102r18 release.
byuu says:
This WIP fixes all the critical pending issues I had open. I'm sure
there's many more that simply didn't make their way into said list. So
by all means, please report important issues you're aware of so they can
get fixed.
Changelog:
- ruby: add variable texture support to GDI video driver [bug
reported by Cydrak]
- ruby: minor cleanups to XShm video driver
- ruby: fix handling of up+down, left+right hat cases for XInput
driver [bug reported by Cydrak]
- nall: fixed vector class so that compilation with GCC 7.1 should
succeed [SuperMikeMan]
- sfc: initialize most DSP registers to random values to fix Magical
Drop [Jonas Quinn]
- sfc: lower PPU brightness when luma=0 from 50% scale to 25% scale;
helps scenes like Final Fantasy III's intro
|
|
|
Tim Allen
|
82c58527c3 |
Update to v102r17 release.
byuu says:
Changelog:
- GBA: process audio at 2MHz instead of 32KHz¹
- MD: do not allow the 68K to stop the Z80, unless it has been granted
bus access first
- MD: do not reset bus requested/granted signals when the 68K resets
the Z80
- the above two fix The Lost Vikings
- MD: clean up the bus address decoding to be more readable
- MD: add support for a13000-a130ff (#TIME) region; pass to cartridge
I/O²
- MD: emulate SRAM mapping used by >16mbit games; bank mapping used
by >32mbit games³
- MD: add 'reset pending' flag so that loading save states won't
reload 68K PC, SP registers
- this fixes save state support ... mostly⁴
- MD: if DMA is not enabled, do not allow CD5 to be set [Cydrak]
- this fixes in-game graphics for Ristar. Title screen still
corrupted on first run
- MD: detect and break sprite lists that form an infinite loop
[Cydrak]
- this fixes the emulator from dead-locking on certain games
- MD: add DC offset to sign DAC PCM samples [Cydrak]
- this improves audio in Sonic 3
- MD: 68K TAS has a hardware bug that prevents writing the result back
to RAM
- this fixes Gargoyles
- MD: 68K TRAP should not change CPU interrupt level
- this fixes Shining Force II, Shining in the Darkness, etc
- icarus: better SRAM heuristics for Mega Drive games
Todo:
- need to serialize the new cartridge ramEnable, ramWritable, bank
variables
¹: so technically, the GBA has its FIFO queue (raw PCM), plus a GB
chipset. The GB audio runs at 2MHz. However, I was being lazy and
running the sequencer 64 times in a row, thus decimating the audio to
32KHz. But simply discarding 63 out of every 64 samples resorts in
muddier sound with more static in it.
However ... increasing the audio thread processing intensity 64-fold,
and requiring heavy-duty three-chain lowpass and highpass filters is not
cheap. For this bump in sound quality, we're eating a loss of about 30%
of previous performance.
Also note that the GB audio emulation in the GBA core still lacks many
of the improvements made to the GB core. I was hoping to complete the GB
enhancements, but it seems like I'm never going to pass blargg's
psychotic edge case tests. So, first I want to clean up the GB audio to
my current coding standards, and then I'll port that over to the GBA,
which should further increase sound quality. At that point, it sound
exceed mGBA's audio quality (due to the ridiculously high sampling rate
and strong-attenuation audio filtering.)
²: word writes are probably not handled correctly ... but games are
only supposed to do byte writes here.
³: the SRAM mapping is used by games like "Story of Thor" and
"Phantasy Star IV." Unfortunately, the former wasn't released in the US
and is region protected. So you'll need to change the NTSU to NTSCJ in
md/system/system.cpp in order to boot it. But it does work nicely now.
The write protection bit is cleared in the game, and then it fails to
write to SRAM (soooooooo many games with SRAM write protection do this),
so for now I've had to disable checking that bit. Phantasy Star IV has a
US release, but sadly the game doesn't boot yet. Hitting some other bug.
The bank mapping is pretty much just for the 40mbit Super Street Fighter
game. It shows the Sega and Capcom logos now, but is hitting yet another
bug and deadlocking.
For now, I emulate the SRAM/bank mapping registers on all cartridges,
and set sane defaults. So long as games don't write to $a130XX, they
should all continue to work. But obviously, we need to get to a point
where higan/icarus can selectively enable these registers on a per-game
basis.
⁴: so, the Mega Drive has various ways to lock a chip until another
chip releases it. The VDP can lock the 68K, the 68K can lock the Z80,
etc. If this happens when you save a state, it'll dead-lock the
emulator. So that's obviously a problem that needs to be fixed. The fix
will be nasty ... basically, bypassing the dead-lock, creating a
miniature, one-instruction-long race condition. Extremely unlikely to
cause any issues in practice (it's only a little worse than the SNES
CPU/SMP desync), but ... there's nothing I can do about it. So you'll
have to take it or leave it. But yeah, for now, save states may lock up
the emulator. I need to add code to break the loops when in the process
of creating a save state still.
|
|
|
Tim Allen
|
04072b278b |
Update to v102r16 release.
byuu says:
Changelog:
- Emulator::Stream now allows adding low-pass and high-pass filters
dynamically
- also accepts a pass# count; each pass is a second-order biquad
butterworth IIR filter
- Emulator::Stream no longer automatically filters out >20KHz
frequencies for all streams
- FC: added 20Hz high-pass filter; 20KHz low-pass filter
- GB: removed simple 'magic constant' high-pass filter of unknown
cutoff frequency (missed this one in the last WIP)
- GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter
- MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter
- MD: added save state support (but it's completely broken for now;
sorry)
- MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound
effects in Streets of Rage, etc)
- PCE: added 20Hz high-pass filter; 20KHz low-pass filter
- WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter
So, the point of the low-pass filters is to remove frequencies above
human hearing. If we don't do this, then resampling will introduce
aliasing that results in sounds that are audible to the human ear. Which
basically an annoying buzzing sound. You'll definitely hear the
improvement from these in games like Mega Man 2 on the NES. Of course,
these already existed before, so this WIP won't sound better than
previous WIPs.
The high-pass filters are a little more complicated. Their main role is
to remove DC bias and help to center the audio stream. I don't
understand how they do this at all, but ... that's what everyone who
knows what they're talking about says, thus ... so be it.
I have set all of the high-pass filters to 20Hz, which is below the
limit of human hearing. Now this is where it gets really interesting ...
technically, some of these systems actually cut off a lot of range. For
instance, the GBA should technically use an 800Hz high-pass filter when
output is done through the system's speakers. But of course, if you plug
in headphones, you can hear the lower frequencies.
Now 800Hz ... you definitely can hear. At that level, nearly all of the
bass is stripped out and the audio is very tinny. Just like the real
system. But for now, I don't want to emulate the audio being crushed
that badly.
I'm sticking with 20Hz everywhere since it won't negatively affect audio
quality. In fact, you should not be able to hear any difference between
this WIP and the previous WIP. But theoretically, DC bias should mostly
be removed as a result of these new filters. It may be that we need to
raise the values on some cores in the future, but I don't want to do
that until we know for certain that we have to.
What I can say is that compared to even older WIPs than r15 ... the
removal of the simple one-pole low-pass and high-pass filters with the
newer three-pass, second-order filters should result in much better
attenuation (less distortion of audible frequencies.) Probably not
enough to be noticeable in a blind test, though.
|
|
|
Tim Allen
|
7e7003fd29 |
Update to v102r15 release.
byuu says:
Changelog:
- nall: added DSP::IIR::OnePole (which is a first-order IIR filter)
- FC/APU: removed strong highpass, weak hipass filters (and the
dummied out lowpass filter)
- MS,GG,MD/PSG: removed lowpass filter
- MS,GG,MD/PSG: audio was not being centered properly; removed
centering for now
- MD/YM2612: fixed clipping of accumulator from 18 signed bits to 14
signed bits (-0x2000 to +0x1fff) [Cydrak]
- MD/YM2612: removed lowpass filter
- PCE/PSG: audio was not being centered properly; removed centering
for now
First thing is that I've removed all of the ad-hoc audio filtering.
Emulator::Stream intrinsically provides a three-pass, second-order
biquad IIR butterworth lowpass filter that clips frequencies above 20KHz
with very good attenuation (as good as IIR gets, anyway.)
It doesn't really make sense to have the various cores running
additional lowpass filters. If we want to filter frequencies below
20KHz, then I can adapt Emulator::Audio::createStream() to take a cutoff
frequency value, and we can do it all at once, with much better quality.
Right now, I don't know what frequencies are best to cut off the various
other audio cores, so they're just gone for now.
As for the highpass filters for the Famicom core, well ... you don't get
aliasing from resampling low frequencies. And generally speaking, too
low a frequency will be inaudible anyway. All these were doing was
killing possible bass (if they were too strong.) We can add them again,
but only if someone can convert Ryphecha's ad-hoc magic integers into a
frequency cutoff. In which case, I'll use my biquad IIR filter to do it
even better. On this note, it may prove useful to do this for the MD PSG
as well, to try and head off unnecessary clamping when mixing with the
YM2612.
Finally, there was the audio centering issue that affected the
MS,GG,MD,PCE,SG cores. It was flooring the "silent" audio level, which
was resulting in extremely heavy distortion if you tried listening to
higan and, say, audacious at the same time. Without the botched
centering, this distortion is completely gone now.
However, without any centering, we've halved the potential volume range.
This means the audio slider in higan's audio settings panel will start
clamping twice as quickly. So ultimately, we need to figure out how to
fix the centering. This isn't as simple as just subtracting less. We
will probably have to center every individual audio channel before
summing them to do this properly.
Results:
On the Mega Drive, Altered Beast sounds quite a bit better, a lot less
distortion now. But it's still not perfect, especially sound effects.
Further, Bare Knuckle / Streets of Rage still has really bad sound
effects. It looks like I broke something in Cydrak's code when trying to
adapt it to my style =(
|
|
|
Tim Allen
|
89d47914b9 |
Update to v102r14 release.
byuu says:
Changelog:
- (MS,GG,MD)/PSG: flip output bit from noise channel [TmEE]
- MD/YM2612: rewrite YM2612::Channel functions to
YM2612::Channel::Operator functions¹
- MD/YM2612: pitch/octave I/O registers should set reload, not value
(fixes sound in most games)
- MD/YM2612: don't try to sign-extend raw PCM values (fixes Shining
Force opening music)
- MD/YM2612: various algorithm simplifications; conversions from
`*`, `/`, `%` to `<<`, `>>`; etc.
Overall ... Sonic the Hedgehog sounds really, really great. Almost
perfect, but there's a bit of clamping going on in the special zones.
Langrisser II sounds really great. Shining Force sounds pretty much
perfect. Bare Knucles (Streets of Rage) does pretty badly ... punches
sound more like dinging a salad fork on a wine glass, heh. Altered Beast
is extremely broken ... no music at the title screen, very distorted
in-game music. I suspect a bug outside of the YM2612 is affecting this
game.
So, the YM2612 emulation isn't perfect, but it's a really good start to
the most complex sound chip in all of higan. Hopefully the VRC7 and
YM2413 will prove to be less ferocious ... not that I'm in any rush to
work on either. The former is going to need the NES mapper rewrite to be
done first, and the latter is cool but not very necessary since all
those games have fallbacks to the inferior PSG audio.
But really ... I can't thank Cydrak enough for doing this for me. It
would have probably taken me months to parse through all of the
documentation on this chip (most of which is in a 55-page thread on
spritesmind that is filled with wrong/outdated information at the start,
and corrections as you go deeper.) Not to mention, learning about what
the hell detuning, low-frequency oscillation, tremolo, vibrato, etc were
all about. Or how those algorithms to compute the final output work. Or
the dozens of special cases littered in there to make everything sound
good. Fierce, nasty chip that.
Now the last real problem is save states ... the Mega Drive is going to
be the trickiest of all to implement with libco. There are lots of areas
where one chip will deadlock another chip while it completes some
operation. We don't have a choice but to force those stalls to abort
anyway, in order to let libco reach the start of its entry point once
again. I don't know what kind of impact that'll have on states ... I
suspect they'll work almost as reliably as the SNES does, but I can't
know that until I implement it. It's going to be pretty nasty, though.
¹: this basically removes a lot of unnecessary op. prefixes and the
need to capture `auto& op = operators[index]` at the start of every
function.
I wanted to have subfunctions like
`YM2612::Channel::Operator::Envelope::run()`, etc but unfortunately,
pretty much all of the envelope, phase, pitch, level functions need to
access each other's state.
|